Sophie: xcdroast-11:0.98-0.a15.38mdv2009.0 i586

xcdroast-0.98-0.a15.38mdv2009.0.i586.rpm

--------------------------------------------------

FAQ for X-CD-Roast 0.98alpha15

29.10.2003 Thomas Niederreiter <tn@xcdroast.org>

--------------------------------------------------

Note: The most current version is always available at
http://www.xcdroast.org/faq

Also check out the X-CD-Roast manual for basic usage
instructions: http://www.xcdroast.org/manual

Overview:

* 1. What is X-CD-Roast and who is working on it?
* 2. Why doesn't X-CD-Roast find all of my hardware?
(CD-Burners/CD-ROMs/DVD-Drives/harddrives)
* 3. Why is there no more direct partition support in the new
X-CD-Roast?
* 4. My writer is not on the supported list! Is is supported anyway
or when it will be supported?
* 5. I cant compile X-CD-Roast 0.98!
* 6. I think I've found a bug! How do I report it to you?
* 7. My language is not supported yet! Can I do the translation for you?
* 8. When will you release the final version?
* 9. The CDDB-lookup does not work! Why?
* 10. Will there be multisession and bootable CD support?
* 11. You say X-CD-Roast 0.98 will not need root or suid-bit? How is
this possible? (Non-root-mode?)
* 12. What about audio-quick copy?
* 13. Why don't you offer CVS access?
* 14. I am a cdwriter-vendor and I want to sponsor you!
* 15. Why does X-CD-Roast report to write up to 750 MB when only 650 MB
do fit on a CD-R?
* 16. All seems to be fine, but I cannot write!!! X-CD-Roast 0.96e
always worked great!
* 17. Uh...I feel stupid but how to write downloaded ISO-images?
* 18. Can I write an audio CD from mp3? Or from wav-files I created
myself?
* 19. How to see the commands X-CD-Roast generates to learn
something about cdrecord?
* 20. Hmm...CD-Text not working yet?
* 21. Why are the tooltips no longer yellow?
* 22. What is the meaning of "Warning: creating filesystem that does
not conform to ISO-9660"?
* 23. X-CD-Roast tells me that my "cdrtools binaries are not
compatible with my system". What does this mean?
* 24. I wrote a second session to a multi session CD but I can't see it!
* 25. How to get this DVD-support working?
* 26. Write performance is bad or my system freezes!
* 27. What means "cdrecord: ISRC '5099750153420' has illegal length."?
* 28. That new ATAPI mode (kernel 2.4.x) causes problems! Should I use it?
* 29. Why I am having problems with my real scsi devices after I installed
scsi-emulation?
* 30. I burned an audio-CD, but all the tracks seem to be messed up.
* 31. How is this remote networked SCSI device support working?
* 32. I changed something on the hardware and X-CD-Roast no longer
sees the correct devices!
* 33. The GTK2-port prints a lot of Gtk-CRITICAL errors on the terminal!

------------------------------------------------------------------------

/1. What is X-CD-Roast and who is working on it?/

X-CD-Roast is a graphical user interface (GUI) for the command-line
cdrtools. You can do anything X-CD-Roast does yourself using these tools
- but it's nicer and easier with the frontend. The cdrtools contain
"cdrecord" (does do the hard job supporting all the cdwriters and is
doing the actual writing of CDs), "readcd" (reads data-tracks of CDs -
its a portable replacement of "dd"), "mkisofs" (masters CD-/images from
given file-trees on the harddisk) and "cdda2wav" (reads audio-tracks).
Cdrecord, readcd and mkisofs are maintained by Joerg Schilling, cdda2wav
by Heiko Eissfeldt and X-CD-Roast by me, Thomas Niederreiter.

------------------------------------------------------------------------

/2. Why doesn't X-CD-Roast find all of my hardware?
(CD-Burners/CD-ROMs/DVD-Drives)/

A common problem is that X-CD-Roast fails to detect your CD-Writer or
any additional CD-ROM devices you might have. Current Linux
distributions install by default a special mode for CD-Writers, but not
for common CD-ROM drives. This results in that your Writer is useable,
but your extra CD-ROM drive is not.
It fix that problem and to get all of your devices working, you have to
install that "special" mode for all of them (Not just the CD-writer).
That mode is called "scsi-emulation" and can be easily activated.
SCSI-devices are fine by default and need no special handling.
ATAPI/IDE, parallelport and USB devices need to installed via
scsi-emulation.
A common way how to install scsi-emulation on Linux is described a few
lines further down.

*** Please note the new direct ATAPI support on linux, as mentioned at
the end of this section. It is different for 2.4.x and for
2.6.x kernels.

Please see section 2 of the CD-Writing-HOWTO
<http://en.tldp.org/HOWTO/CD-Writing-HOWTO.html> how to configure
your kernel on Linux. (very outdated!)

If you use not Linux but any other OS, you have to check the cdrecord
documentation how to access your writer.

*Note about configuring SCSI-emulation in Linux:*

The trick are these two lines (Examples for two drives which are
connected as master and slave on the secondary IDE controller):

/Line for /etc/modules.conf/

options ide-cd ignore='hdc hdd'

(This tells the IDE-driver to ignore the two devices you want to use
within X-CD-Roast)

/Line for /etc/lilo.conf/ (add anywhere before any "image=" lines)

append="hdc=ide-scsi hdd=ide-scsi" (Kernel 2.2.x and most 2.4.x)

append="hdc=scsi hdd=scsi" (Kernel 2.4.x only, if the above line
does not work)

(And this tells the kernel to install scsi-emulation for two drives)

If you use grub instead of lilo you might try something like that:

/Example line for /boot/grub/grub.conf or /etc/grub.conf/

kernel /vmlinuz-2.2.19 ro root=/dev/hda6 hdc=ide-scsi hdd=ide-scsi
(Kernel 2.2.x and most 2.4.x)

kernel /vmlinuz-2.4.7-10 ro root=/dev/hda6 hdc=scsi hdd=scsi
(Kernel 2.4.x only, if the above line does not work)

You might have to load the scsi-emulation driver manually with the
following command.

/sbin/insmod ide-scsi; /sbin/insmod sg

Now X-CD-Roast should detect your drives.

Please note that you want to change your /dev/cdrom link from /dev/hdc
or /dev/hdd to /dev/sr0 or /dev/sr1, because the device files changed
through the different driver.

--
Note:
Starting with version 0.98alpha12 there is experimental support for
direct ATAPI support on linux kernels 2.4.x. Now X-CD-Roast should
detect all your devices out-of-the-box on all current linux
distributions. Please note, that the ATAPI interface does not support
DMA transfers at all and therefore you might have high system
load using it.
* See also question Nr. 28.

For newer kernels 2.5.x or 2.6.x the automatic scanning might not work.
If this is the case for you, you have to give all devices manually
in the setup of X-CD-Roast, by clicking on "Manually add device" and
entering the device name of your CD-Writer. (e.g. /dev/hdc or /dev/hdd)

Note 2:
On non-linux systems you have to enter often a manual device-ID to
have your writer detected by cdrecord. See the documentation of cdrecord for details. Such an ID can be entered in the X-CD-Roast setup with
the "Manually add device" button. Alternatively you can use the -f
command line option. (see man page)

------------------------------------------------------------------------

/3. Why is there no more direct partition support in the new X-CD-Roast?/

Partition support was introduced in X-CD-Roast about 4 years ago. At
this time using a raw partition to save image-data was safer than going
through a filesystem. Today the computers are so fast, that using a
raw-partition is absolutly nonsense. The partitions were also a severe
security risk, because if you set them wrong, you were able to delete
your system. In version 0.98 of X-CD-Roast you can specify an unlimited
number of directories where the image/audio-data can be stored. This is
much more flexible and transparent. If you still have some extra
partitions dedicated only for cdwriting with X-CD-Roast, you simple have
to format them and mount them somewhere. Then you just specify this
mountpoint in X-CD-Roast setup and you can use it like in former version
of X-CD-Roast. (But you also can store any other data on it...X-CD-Roast
will NOT delete any data it does not recognize)

------------------------------------------------------------------------

/4. My writer is not on the supported list! Is is supported anyway or
when it will be supported? /

Please look at the cdrecord-homepage
<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>
for a current list of supported writers. But even when your writer is
not on the list, chances are very high that it is supported. Newer
writers (less than one year) usually are SCSI3/MMC conform, which means
that they run anyway, even when their name is not on that list. All
ATAPI-Writers are supported. Parallel-Writers are also all supported,
when the parallel-port driver in the Linux kernel works. (See your
Kernel-documentation)

------------------------------------------------------------------------

/5. I can't compile X-CD-Roast 0.98!/

X-CD-Roast is by now very easy to compile. If you have problems you
should read the README file which explains all step-by-step. However I
recommend to install X-CD-Roast from source-RPMs. There it is almost
impossible to do anything wrong. See the download section of
www.xcdroast.org for instructions.

------------------------------------------------------------------------

/6. I think I found a bug! How do I report it to you?/

If you think you found a bug you have first to find out if you can
reproduce it reliably. Then run xcdroast in debug mode (-d 10 switch)
and send me the output. Please describe what exactly you have done and
what went wrong.

If you have no idea how to get the debug output into a file try this:

sh/ksh/bash: xcdroast -d 10 2>/tmp/debugoutput.txt

csh/tcsh: xcdroast -d 10 >& /tmp/debugoutput.txt

------------------------------------------------------------------------

/7. My language is not supported yet! Can I do the translation for you?/

I am looking for people who volunteer to translate X-CD-Roast.
Starting with version 0.98alpha11 uses gettext as translation-engine. Please
refer to the TRANSLATION.HOWTO for more details.

http://www.xcdroast.org/xcdr098/TRANSLATION.HOWTO.txt

A list of the current translation status can be found here:

http://www.xcdroast.org/xcdr098/translations.html

Big thanks to all who sent me already translations!

------------------------------------------------------------------------

/8. When will you release the final version?/

Good question. I really do not know. I have plenty of other things to
do, but I try hard to make any release as quick as possible. There will
be a lot of test versions before the final release which will be
somewhere in the end of 2003.

------------------------------------------------------------------------

/9. The CDDB-lookup does not work! Why?/

Starting with version 0.98alpha11 I support CDDB via HTTP and proxies.
0.98alpha12 even supports proxy-authentication. To use that feature you
simply enter your proxy-server in the format "user:password@hostname" in
the X-CD-Roast setup.

Please send debug output if you still have problems.

------------------------------------------------------------------------

/10. Will there be multisession and bootable CD support?/

Version 0.98alpha10 added full multisession support and with version
0.98alpha11 bootable CD creation got much simpler.

------------------------------------------------------------------------

/11. You say X-CD-Roast 0.98 will not need root or suid-bit? How is this
possible? (Non-root-mode?)/

Earlier version of X-CD-Roast needed root permissions to access the
partition stuff. But because I've thrown this out there is no reason for
root in the GUI. This is much safer and also disabled the need for a
non-root mode. X-CD-Roast is automatically safe to be run by any user.
This is possible because only the helper application will get suid-root
to get access to the scsi-hardware. The tools itself will drop their
root permissions as fast as possible to make it very hard to exploit
them (buffer-overrun or stuff like that). Any security issues will be
taken care of in the tools itself. Should be very hard to do any harm
with them.

See the file README.nonroot for details.

------------------------------------------------------------------------

/12. What about audio-quick copy?/

Version 0.98alpha15 supports quick copy of audio-CDs. You have to install
a very new version of cdrecord for that, because earlier versions did
not have this feature.

The cdrtools 2.01a13 and later will automatically unlock the quick audio
copy mode. Please note using a burnproof writer is very recommended.

------------------------------------------------------------------------

/13. Why don't you offer CVS access?/

At the moment I don't want anybody to get the sources without my
approval. In this early stage are too many changes all the time and any
CVS archive would only disappoint you because the code won't work at all.
Anyway - I created a CVS-repository at sourceforge. You are free to drop
by.

------------------------------------------------------------------------

/14. I am a cdwriter-vendor and I want to sponsor you!/

Fine! If you send me free hardware, I can test X-CD-Roast with it and
recommend it to other users. I also will put your logo on my webpage.
Please don't hesitate to contact me.

Current sponsors are:

* RICOH <http://www.ricoh.com>, who gave me a CD-R/RW MP7060S, a
DVD/CDRW MP9120 and a MP7125A
* SANYO <http://www.sanyo.com>, who gave me a CRD-RW1, a CD-R
CRD-R800S, a CRD-BP2 and CRD-BP1300P
* SONY <http://www.sony.com>, who gave me a CRX-140S
* AOPEN <http://www.aopen.com>, who gave me a CRW4048

Also thanks to Netplace <http://www.netplace.de> for hosting my domain.

------------------------------------------------------------------------

/15. Why does X-CD-Roast report to write up to 750 MB when only 650 MB
do fit on a CD-R?/

This or any other questions about the size-calculations of X-CD-Roast
relate to the used sector sizes. First of all you have to understand
that there is a big difference between writing a data CD or an audio CD.
When you look at a standard CD-R there may be written on it: Capacity 74
Min / 650 MB. The first number is capacity that fits on an audio CD. The
second relates only to data CDs. So how comes that X-CD-Roast insits on
needing almost 750 MB space for 74 min audio? An audio CD consists of
2352 bytes sectors - as opposed to 2048 bytes needed for data! In
reality also the data-sector takes up 2352 bytes - but only 2048 bytes
are useable for you - the other 304 bytes are used for error-correction,
sector numbers and stuff.
So, when a CD-R vendor tells you about 650 MB capacity this means that
you calculate with 2048 byte sectors. And because the audio-sectors are
bigger, you need more space to rip audio to the harddrive. So, reading a
74 Min CD to the harddisk takes up to

74 * 60 seconds * 44100 hz sample rate * 2 (16 bit) * 2 (stereo) =
783216000 bytes = 746 MB.

And 746 MB is the size X-CD-Roast reports! Because thats exactly the
free size you need on your harddrive to save the audio-tracks. Don't
worry that this might not fit on your CD-R just because the vendor wrote
650 MB on it - X-CD-Roast will warn you in any case when something might
not fit. And if you don't believe X-CD-Roast, then calculate yourself!
As a rule of thumb - when creating audio CDs, watch the minute counter
and when doing data watch the MB counter. Its just as simple as it sounds.

------------------------------------------------------------------------

/16. All seems to be fine, but I cannot write!!! X-CD-Roast 0.96e always
worked great!/

The old version did only write in Track-at-once mode (TAO), because at
that time cdrecord did not support otherwise. X-CD-Roast 0.98 however
does default to DAO (Disc-at-once) because this is the only mode for
good audio copies. Most writers work with cdrecord and DAO fine, but
yours obviously not. Switch to TAO mode in the write-menu and you have
the same behaviour as with the old X-CD-Roast.
(DAO/SAO may work fine with the most recent version of cdrecord and your
drive)

If DAO mode fails you should try the RAW modes - once you find the best
write mode for your drive you should be happy.

------------------------------------------------------------------------

/17. Uh...I feel stupid but how to write downloaded ISO-images?/

If you downloaded an ISO-image (e.g. a linux distribution) you have to
copy that big file (extension should be .iso) first to an
image-directory of X-CD-Roast. You specify these directories in Setup at
the "HD Settings" tab. These are the places where X-CD-Roast will look
for audio (.wav) or data tracks.
Now you enter the "Create CD" menu and you will see your image-file
displayed nicely in the "Image-Information" window. Go to "Write Tracks"
-> click on "Layout tracks" tab, add your image-file, click on "Accept
track layout" and finally a click at "Write tracks" will write that
image perfectly to your CD-R/RW.

------------------------------------------------------------------------

/18. Can I write an audio CD from mp3? Or from wav-files I created myself?/

As X-CD-Roast 0.98alpha15 is not yet able to handle mp3-files directly,
you have to convert the files yourself into wav-format. There are a lot
of ways to do this - you can try /mpg123 -w myfile.wav myfile.mp3/.
In the end you have a lot of wav-files which should be written as
audio-CD. Just make sure X-CD-Roast does find your wav-files in its
image-directories and then just go ahead like described in FAQ Question
17 <#17>.

*Note:* X-CD-Roast can only write CD-quality wav-files (44.1khz, 16 bit,
stereo) - If your files do not meet this requirements they will be
displayed with an audio-icon with a red slash through it. This files
can't be written and will be ignored until you convert them into a
proper format.

------------------------------------------------------------------------

/19. How to see the commands X-CD-Roast generates to learn something
about cdrecord?/

In order to learn how X-CD-Roast does call the cdrecord-tools you can
start X-CD-Roast with the -d 1 flag, or set in the setup the loglevel to
"verbose" and see the logfile.
This way its easy for you to try out new versions of cdrecord on the
commandline to see if some problem is already fixed there.

------------------------------------------------------------------------

/20. Hmm...CD-Text not working yet?/

Starting with version 0.98alpha10 CD-Text reading/editing/writing is
fully supported.

------------------------------------------------------------------------

/21. Why are the tooltips no longer yellow?/

Former versions of X-CD-Roast 0.98 set the tooltip color manually to
yellow, overriding each setting that may came by a theme. This also
broke multibyte fonts. If you no longer have yellow tooltips and you
want them back, you have to edit your or the systemwide gtkrc file.

Add the following lines to your ~/.gtkrc file, or to
/usr/local/etc/gtk/gtkrc (or /etc/gtk/gtkrc - depends where you
installed GTK):

style "gtk-tooltips-style" {
bg[NORMAL] = "#ffffc0"
}

widget "gtk-tooltips" style "gtk-tooltips-style"

------------------------------------------------------------------------

/22. What is the meaning of "Warning: creating filesystem that does not
conform to ISO-9660"?/

Ignore this warning printed by mkisofs. If you use the various
extensions of the ISO-9660 file system, you are no longer strictly
following the ISO-9660 standard. The recorded cd will be readable
nevertheless on most systems.
If you really want to get rid of that message, you have to deactivate
all the master-options - the resulting CD will then just work good on
DOS systems and is mostly useless everywhere else.

------------------------------------------------------------------------

/23. X-CD-Roast tells me that my "cdrtools binaries are not compatible
with my system". What does this mean?/

This is a common linux problem. cdrecord and cdda2wav use a technique
called "memory-mapping" (mmap) to do their work. This requires however
that the kernel and libc versions do exactly match to the system where
these tools have been compiled. If you use binaries from other systems
the memory adresses do not longer match and cdrecord aborts with this
mmap-error. This means you have to install versions that are compiled
for your system. Easiest to do so is to compile them yourself (just
rebuild the cdrtools-source-rpm, see the xcdroast-download page
<http://www.xcdroast.org/xcdr098/rpms-a14.html>) or to get the correct
RPMs for your system. After you replaced the old cdrtools with the
correct compiled versions X-CD-Roast should work fine.

You might run into that problem with the binary-only releases of
cdrecord-ProDVD. On linux these require at least kernel 2.4.x to work -
you have to update you kernel if you want to use it.

------------------------------------------------------------------------

/24. I wrote a second session to a multi session CD but I can't see it!/

Chances are very high that the CD was written correctly, but you simply
fail to read it the right way. Reading multi session requires support in
the operating system and in the reading drive itself. Also keep in mind
that some graphical GUIs like KDE or Gnome tend to cache CD-Contents and
you DON'T see any changes on your CD until you force a refresh.
To check if a CD was correctly written always mount it manually or even
check it on a different machine.

------------------------------------------------------------------------

/25. How to get this DVD-support working?/

I included a file "README.ProDVD" with X-CD-Roast which explains how to
install the DVD version of cdrecord (cdrecord-ProDVD). That file is with
all the other Documention most likely in
/usr/share/doc/xcdroast-0.98alpha15/ on your system when you installed
the RPM version.

Also note that you can only create pure Data-DVDs only. Technically
Video-DVDs are Data-DVDs too, but with a special directory-structure.
Its impossible to try to copy an encrypted Video-DVD to a writeable
DVD-media. (The DVD key sector cannot be written to a writeable
DVD-media because they hardcoded that sector as "unwriteable").
Theoretically its possible to write unencrypted Video-DVDs, you just
have to prepare the correct data yourself first and then master and burn
it with X-CD-Roast. (Enable the "DVD Video" option in the ISO-settings)

With the most recent version of cdrecord-ProDVD DVD+R/RW is also
supported in addition to DVD-R/RW. Just use your DVD+-writer as you
would use a normal CD-writer.

------------------------------------------------------------------------

/26. Write performance is bad or my system freezes!/

If your system is put into high stress while you write a CD you might
get buffer underruns or in the worst case the system locks up
completely. Almost always these problems hint towards an incorrectly
configured system.

First check the transferrate of your harddrive - on linux there is a
tool called hdparm which does a nice job here.

/sbin/hdparm -t /dev/hda

This will measure the raw read throughput of your drive - you should see
values like 20-30MB/s for modern drives. If you are way below that value
you cannot write CDs in high-speed. Check if DMA transfer is enabled for
that drive. (See "man hdparm" for details).

Next thing is to check if you have other programs which also access the
CD-ROM/CD-Writer. Desktop-Systems often have KDE or Gnome running which
try to automount each inserted CD. This often kills cdrecord. Turn off
all this automatic CD handling in the Setup of KDE/Gnome. There are also
CD-Player applets in KDE and Gnome which should be disabled.

Now we check the writer device itself. Use hdparm again to see if DMA is
enabled. For some systems DMA should be on, on others it should be
disabled. You have to try for yourself which configuration gives you the
best results.

/sbin/hdparm -d 0 -u 0 -k 1 /dev/hdc

This command disables DMA transfers /dev/hdc (possibly your CD-Writer).
Some reports told me that this often fixed problems.

If you still have problems you can try to set the "Set SCSI IMMED flag"
option within the X-CD-Roast write dialog. On systems where harddrive
and writer are on the same IDE bus this can improve the behaviour.

------------------------------------------------------------------------

/27. What means "cdrecord: ISRC '5099750153420' has illegal length."?/

When cdrecord aborts writing with a message about illegal ISRC or MCN
numbers, then it means that you got bad data from the CD you read before.
The manufacturer of that CD has put that illegal data on it and cdda2wav
retrieved it as you read the tracks. cdrecord won't write illegal data
and complains.

Starting with X-CD-Roast 0.98alpha14 this problem is automatically
detected and can be resolved with a single click.

------------------------------------------------------------------------

/28. That new ATAPI mode (kernel 2.4.x) causes problems! Should I use it?/

That new ATAPI mode is enabled by default in X-CD-Roast on linux.
It requires a kernel 2.4.x and is able to access ATAPI devices directly
through the IDE driver, without the help of SCSI emulation.
However, that mode is still experimental and causes some problems.
Using a CD writer in that mode is not recommended - please use always
SCSI emulation here. The ATAPI mode on a writer will cause great delays
in all X-CD-Roast operations, because communication with a device takes
much more time. You will also notice a lot of driver errors in your
system log files. This seems to be normal.

You can tell X-CD-Roast to ignore the ATAPI mode when you start it with the
"-a" option.

There is also no DMA transfer supported at all though the ATAPI interface.

On some not correctly installed machines X-CD-Roast will find your devices
both via SCSI emulation and via ATAPI - they are displayed double in the
setup. Things could work nevertheless, but use the scsi-emulated devices
only then. (The devices without the "ATAPI:"-marking)

Conclusion: Use your writer only with SCSI emulation, but a normal CD/DVD-ROM
drive as read only device will work fine in ATAPI mode. This is also the
default setup for many Linux distributions.

Note: All this problems should be non-existant with 2.6.x kernels, here
ATAPI is the recommended setup.

------------------------------------------------------------------------

/29: Why I am having problems with my real scsi devices after I installed
scsi-emulation?/

There should be no problem with real scsi devices - scsi emulation is
just adding another virtual scsi-controller to your system. So you might
have now several controllers and perhaps some device numbering is no longer
correct. I have also heard of cases where the previous scsi-controller
module no longer gets loaded automatically at startup.

In this case just load the module manually by putting this line
into /etc/rc.d/rc.local:

/sbin/modprobe aic7xxx

(replace aic7xxx by the actual name of the scsi-module you need)

------------------------------------------------------------------------

/30: I burned an audio-CD, but all the tracks seem to be messed up./

X-CD-Roast writes by default audio-CDs in DAO mode. However, on some
writers this does not work correctly and you might get an audio-CD
which behaves strangely in a CD-player (displaying wrong track counts,
not able to skip tracks...).
The fix is to write the CD in one of the RAW (e.g. RAW96R) modes instead.

------------------------------------------------------------------------

/31: How is this remote networked SCSI device support working?/

The cdrtools support access to writers/readers over the network for a
long time now. They utilize a protocol called "REMOTE-SCSI" (RSCSI)
that is tunneled via a standard rsh-server between the client and server
machine. On a 100mbit network it should be possible to even write with
high speeds.

This makes it possible to use X-CD-Roast to write on a CD/DVD-writer that
is built into a different machine over the network.

Please see the file "README.rscsi" included with the cdrecord documentation
for details, but here are the basic installation steps outlined:

- install the cdrtools on the server machine (machine with the writer-
hardware) and verify that you can access your writer locally.
(e.g. by cdrecord -scanbus)
It does not matter how your writer is installed as long it can work
locally with the cdrtools. Firewire, USB, ATAPI, SCSI, scsi-emulation...
all works.

- activate/install a rsh server on the server machine. rsh is usally spawned
via the inetd (xinetd) daemon.

- test if rsh works by creating a user without password on the server maschine
and access it from the client (the machine where X-CD-Roast runs) with a
command like this: "rsh serverhost -l user_without_password date"

You should see the output of the date command. If not you might have to
check if need to open up your firewall. If the command works ok, best
remove the password-less user again.

- create a rscsi-user on the server. It requires a home-directory, but
you don't need to set a password. The login shell must be set to the
cdrtools rscsi programm: e.g. /opt/schily/sbin/rscsi
Then create a ~rscsi/.rhosts file where you write which user from which
host will be able to use remote-scsi. (syntax: "hostname username" per
line)

- copy the "rscsi.dfl" file from the cdrtools sources to /etc/default/rscsi
Edit as described within the file. Please take care that you always use i
tabs instead of spaces in that file.

- Now you should be able to do on the client a
"cdrecord dev=REMOTE:rscsi@serverhost -scanbus" and get a list
of the devices on the server maschine.

Within X-CD-Roast just enter setup and add "REMOTE:rscsi@serverhost" as
manually configured device.

------------------------------------------------------------------------

/32: I changed something on the hardware and X-CD-Roast no longer
sees the correct devices!/

Starting with version 0.98alpha14 X-CD-Roast no longer scans devices
at each startup. The devices are only scanned the first time and then
saved into your configuration file. If you changed something on your
hardware then the device names might got changed. You have to tell
X-CD-Roast to rescan for devices (first panel in the setup menu) and
save the new information.

If you use the non-root-mode then you have both to rescan as root and
as normal user. If you forget to rescan as root then the devices the
root user saw at his first startup are loaded everytime, even when you
rescanned as normal user later.

------------------------------------------------------------------------

/33: The GTK2-port prints a lot of Gtk-CRITICAL errors on the terminal!/

When you have compiled X-CD-Roast with GTK2 support you might see a lot
messages like these in your terminal window:

(xcdroast:8460): Gtk-CRITICAL **: file gtkwidget.c: line 2927
(gtk_widget_event): assertion `WIDGET_REALIZED_FOR_EVENT
(widget, event)' failed

I do not know what causes them, but according to the GTK documentation
you can just ignore them. If anybody knows a way to fix that, please
contact me.

------------------------------------------------------------------------

Any FAQ I forgot? Please contact me...

29.10.2003 Thomas Niederreiter (tn@xcdroast.org)