2009-06-08 17:02 +0000 [r6677-6678] Sean Bright <sean.bright@gmail.com>
* dahdi-tools version 2.2.0 released.
* Makefile: Since this 'echo' is part of a larger statement, we
don't need the @ symbol. Cleans up an error I am seeing on
Ubuntu.
* Makefile: Get rid of parallel build warnings from GNU make.
2009-05-28 14:04 +0000 [r6668] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/waitfor_xpds: xpp: if $dahdi_hardware is empty, don't use it
in an error message
2009-05-27 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools version 2.2.0-rc3 released.
2009-05-26 09:55 +0000 [r6655-6657] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Reword the message after 'make config' for the case no
hardware found Check the output of dahdi_hardware and give a
different message for the case it found no hardware. (closes
issue #14792) Reported by: Dovid Patches:
dahdi_hardware_nodev_make.diff uploaded by tzafrir (license 46)
* xpp/waitfor_xpds: Properly fix usage of waitfor_xpds in
non-standard settings. From xpp rev. 7137.
2009-05-19 16:46 +0000 [r6643-6647] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Config/Params.pm, xpp/dahdi_genconf,
xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm,
xpp/perl_modules/Dahdi/Config/Gen/System.pm,
xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/genconf_parameters:
dahdi-perl: make dahdi_genconf default to hardhdlc
dahdi_genconf's 'bri_hardhdlc' parameter changes. Should
generally work with no need for manual configuration unless you
use a bristuffed driver (zaphfc, qozap). See notes in
genconf_parameters.
* xpp/waitfor_xpds, dahdi.init: dahdi.init: moved test for
astribanks into waitfor_xpds If the system starts with an
Astribank with no firmware, the firmware loading may take a while
and the Astribank only becomes ready some time after the DAHDI
init script starts. This means that the test at the beginning of
xpp_startup() in dahdi.init fails to find an Astribank, and the
init script simply continues ignoring this. This changeset moves
the testing inside the script waitfor_xpds. The script now: 1.
Tests for an Astribank using dahdi_hardware and exists
immediately if none found. 2. A loop (of maximum 10 seconds)
waits for the first Astribank to be detected by the driver. 3.
Waiting for the initialization of all the Astribanks to complete
(The original waitfor_xpds) The support for the old procfs
iinterface has been removed, as it has never been used with
DAHDI.
* xpp/Makefile, xpp/astribank_tool.8, xpp/astribank_allow.8
(added): xpp: install astribank_allow As we install it, we need a
matching man page.
2009-05-17 12:01 +0000 [r6630-6632] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Config/Gen/Users.pm: A closer-to-reality
users.conf generation module
* xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm,
xpp/perl_modules/Dahdi/Xpp/Mpp.pm, xpp/genconf_parameters: Fix
typos in xpp documentation
2009-05-14 14:02 +0000 [r6619] Shaun Ruffell <sruffell@digium.com>
* dahdi_cfg.c: dahdi_cfg: Default to the us tonezone if not
specified in system.conf. If there are not "loadzone" and
"defaultzone" lines in /etc/dahdi/system.conf, default to the us
zone. This mimics the behavior of older zaptel releases.
DAHDI-29.
2009-05-13 20:18 +0000 [r6613-6617] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/mpp_funcs.c, xpp/astribank_tool.c: astribank_tool: Support
'reset' of pre-MPP protocol as fallback As of USB firmware rev.
6926, the Astribank control connection protocol has changed in an
incompatible manner. If astribank_tool fails to open a device
when running a reset command, try to reset the device with the
command from the old (pre-MPP) protocol (A single 0x20 byte). No
support whatsoever for any other feature of the old protocol.
From xpp rev. 7067. (previous commit was xpp rev. 7066).
* xpp/mpp_funcs.c: xpp: better error reporting when failing to talk
to a pre-MPP Astribank.
* xpp/perl_modules/Dahdi/Chans.pm, xpp/perl_modules/Dahdi/Span.pm:
dahdi-perl: Patterns for Rhino E1/T1 cards.
2009-05-12 07:50 +0000 [r6601-6603] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/README.Astribank: A few more chan_zap -> chan_dahdi in
README.Astribank .
* xpp/perl_modules/Dahdi/Chans.pm: DAHDI-perl: Fix detection of
empty slots in Rhino cards.
2009-05-09 06:33 +0000 [r6579-6585] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/README.Astribank: Fix a broken link
* xpp/README.Astribank: documentation updates: xpp_order, new USB
loading, and more
* xpp/perl_modules/Dahdi.pm: dahdi-perl: scan only "number" files
under /proc . (In case someone, such as dahdi_dynamic_ethmf adds
there some other entries)
2009-04-29 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools version 2.2.0-rc2 released.
2009-04-27 19:45 +0000 [r6512] Kevin P. Fleming <kpfleming@digium.com>
* configure, acinclude.m4: incorporate the autoconf 2.63 fixes here
too
2009-04-26 10:29 +0000 [r6492] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, xpp/xpp_order (removed): Remove useless sample file The
sample xpp_order will be generated anyway when running
'dahdi_genconf xpporder' (see
xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm) . No need to
clutter the main DAHDI installation with it.
2009-04-23 17:03 +0000 [r6476] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, xpp/xpp_order: xpp: xpp_order is another config file
that should go to /etc/dahdi Also slightly fix the sample config.
2009-04-22 10:25 +0000 [r6427-6442] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* dahdi.init: make sure '/etc/init.d/dahdi stop' ends with a
newline
* ppp/dahdi.c: Yet another left-over DAHDI_PARAMS. ppp almost
builds
* xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm:
Dahdi::Config::Gen::Xpporder: use number rather than object in
warning
2009-04-21 13:44 +0000 [r6419-6421] Sean Bright <sean.bright@gmail.com>
* dahdi_monitor.c: Correct error check for fopen() calls in
dahdi_monitor.c. dahdi_monitor.c was checking for an error
calling fopen() by determining if the return value was less than
0. fopen(), however, returns a FILE * and returns NULL on
failure. (closes issue #14894) Reported by:
gknispel_proformatique Patches:
dahdi_monitor_fix_check_fopen_result.patch uploaded by gknispel
(license 261)
* dahdi_monitor.c: Use correct return value type for getopt(). In
dahdi_monitor.c, the return value of getopt() was being assigned
to a char while the function actually returns an int. Fix
suggested by reporter. (closes issue #14893) Reported by:
gknispel_proformatique
* dahdi_monitor.c: Whitespace and coding guidelines changes
2009-04-20 13:44 +0000 [r6417] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/dahdi_hardware, xpp/perl_modules/Dahdi/Xpp/Xbus.pm,
xpp/test_parse.c, xpp/twinstar, xpp/twinstar_hook,
xpp/twinstar_setup, xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm
(added), xpp/perl_modules/Dahdi/Xpp/Mpp.pm: xpp: twinstar-related
perl improvements * New generator Dahdi::Config::Gen::Xpporder
can generate and xpp_order config for an existing setup. * Add
more TwinStar related logic to Dahdi::Xpp::Mpp. Simplifies the
twinstar utility accordingly. * twinstar_hook: for the multiple
Astribanks case. * twinstar_setup: More logic tests. Now
delegates configuration generation to dahdi_genconf (with new
Xpporder generator). * dahdi_hardware: Show number of channels
with -v
2009-04-16 17:32 +0000 [r6375] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xpp_fxloader: xpp_fxloader: exit properly when run with
incorrect argument
2009-04-10 09:53 +0000 [r6344] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/Makefile, xpp/astribank_hook (added): Move astribank_hook
from linux to tools. Install it by default
2009-04-07 08:13 +0000 [r6337] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/hexfile.c: hexfile.c was accidentally left out of r6313
2009-04-02 20:56 +0000 [r6278-6313] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/pic_loader.h (added), xpp/astribank_hexload.8 (added),
xpp/twinstar_setup (added), xpp/xpp_fxloader,
xpp/astribank_tool.c (added), xpp/astribank_allow.c (added), xpp,
xpp/xpp_sync, xpp/dahdi_genconf, xpp/twinstar (added),
xpp/mpp_funcs.c (added), xpp/Makefile, xpp/mpp_funcs.h (added),
xpp/astribank_tool.8 (added), xpp/perl_modules/Dahdi/Xpp/Mpp.pm
(added), xpp/astribank_upgrade (added),
xpp/perl_modules/Dahdi/Xpp.pm,
xpp/perl_modules/Dahdi/Hardware/PCI.pm, xpp/dahdi_hardware,
xpp/twinstar_hook (added), xpp/xpp_order (added),
xpp/astribank_hexload.c (added), xpp/dahdi_registration,
xpp/perl_modules/Dahdi/Hardware/USB.pm,
xpp/perl_modules/Dahdi/Xpp/Xbus.pm, xpp/debug.c (added),
xpp/dahdi_drivers, xpp/lsdahdi, xpp/astribank_usb.c (added),
xpp/hexfile.h, xpp/perl_modules/Dahdi/Hardware.pm, xpp/debug.h
(added), xpp/astribank_usb.h (added),
xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/mpp.h (added),
xpp/pic_loader.c (added): Support for Astribanks 116x: tools part
* New USB firmware loading mechanism. - Incompatible with
previous one: upgrade using fxload or hard reset -
astribank_hexload is the new low-level loading tool - fpga_load
remains for backward compatibility. - xpp/astribank_upgrade:
automate upgrading using fxload * Much enhanced control protocol
("MPP") - astribank_tool is the low-level tool for that. *
Support for the TwinStar (dual USB port) - Managed through
astribank_tool - Wrapper perl modules and scripts provided *
Allow explicit ordering of Astribanks - /etc/dahdi/xpp_order -
explicit order of Astribanks on the system - The default sorter
is now to use those and fall back to connectors (previous
default). - An option to dahdi_registration to change sorting.
* hdlcstress.c: hdlcstress.c: add option -b not to stress BRI too
much Aparantly the HFC chip can't stand the heat of this test.
Let's give it an occasional rest. Also add getopts support.
* Makefile: Install genconf_parameters on 'make install' as well
* blacklist.sample: xpp_usb should not be blacklisted: it does not
register automatically anyway.
* xpp/perl_modules/Dahdi/Config/Gen/Modules.pm (added): Implement
'dahdi_genconf modules' (generate /etc/dahdi/modules)
2009-03-29 18:53 +0000 [r6272] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Config/Gen.pm: dahdi_genconf: Set the
context same as groups.
2009-03-26 18:28 +0000 [r6261] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* doc/dahdi_scan.8: s/zap/dahdi/ again in dahd_scan.8
2009-03-26 18:02 +0000 [r6259] Kevin P. Fleming <kpfleming@digium.com>
* dahdi_cfg.c: when /etc/dahdi/system.conf does not have an echo
canceller defined for a channel, but the channel previously had
one assigned, running dahdi_cfg does not remove the assigned echo
canceller from the channel as it should. this commit changes that
behavior, so that every channel with a defined signaling mode is
updated to have the proper (or no) echo canceller assigned.
2009-03-22 10:31 +0000 [r6215] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Config/Gen/Users.pm,
xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm,
xpp/perl_modules/Dahdi/Config/Gen/System.pm,
xpp/perl_modules/Dahdi/Config/Gen/Unicall.pm: dahdi-perl: "allow"
hand-editing of generated files Rework the text added by
dahdi_genconf generators to say that you can hand-edit files. But
just don't complain if they get mysteriously overriden when it is
run again :-) (closes issue #14569) Reported by: jtodd
2009-03-17 17:07 +0000 [r6189] Jason Parker <jparker@digium.com>
* dahdi_monitor.c: Remove remnants of -p option, since it no longer
exists.
2009-03-17 13:52 +0000 [r6187] Russell Bryant <russell@digium.com>
* zonedata.c: Add tone definitions for Turkey. (closes issue
#10450) Reported by: msahinbas
2009-03-17 09:10 +0000 [r6167-6185] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Use LIBS instead of LDFLAGS directly in tools Makefile
The Makefile of dahdi-tools set the variable LDFLAGS directly,
rather than adding to LIBS. This does not allow placing LIBS
after all the linked objects. (closes issue #14638) Reported by:
Chainsaw Patches: dahdi-tools-2.1.0.2-asneeded.patch uploaded by
Chainsaw (license 723)
* xpp/README.Astribank, xpp/xpp_sync, dahdi.init: dahdi.init: call
xpp_sync a bit later. xpp_sync needs to only be called after
dahdi_cfg was run, because the application of system.conf may
change the priority of a PRI module span (If it is a sync
provider, "NT", priority is lower). Also some documentation-only
changes for xpp_sync.
2009-03-09 16:30 +0000 [r6110] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Chans.pm: Fix detection of channels of
dynamic spans in Dahdi::Chans Fix the pattern detection of
channels belonging to dynamic (dahdi_dynamic) spans in perl
programs that use Dahdi::Chans (e.g.: lsdahdi) (closes issue
#14630) Reported by: tamiel Patches:
20090309-perl5-Dahdi-Chans.diff uploaded by tamiel (license 712)
2009-03-07 00:10 +0000 [r6107] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Chans.pm,
xpp/perl_modules/Dahdi/Hardware/USB.pm: Detect Sangoma USB FXO
device; fix detection of Sangoma DAHDI channels (By Alessandro
Zummo)
2009-03-05 21:10 +0000 [r6095] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* dahdi.init: Fix a typo in shutting down dynamic spans in
dahdi.init Fixes shutdown_dynamic() in the dahdi init.d script.
Not enabling it by default just yet (the second half of the
patch) until we get some further confirmation that such a
shutdown is always good. (from issue #14603) Reported by: tamiel
Patches: 20090304_dahdi.init.patch uploaded by tamiel (license
712)
2009-03-03 20:39 +0000 [r6071-6078] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, README, /: Include sample genconf_parameters in
dahdi-tools README.
* xpp/perl_modules/Dahdi/Config/Params.pm,
xpp/perl_modules/Dahdi/Config/Gen.pm, xpp/genconf_parameters:
genconf_parameters: Add option fxo_default_start; Document
genconf_parameters * Add a dqahdi_genconf option
fxo_default_start, equivalent of fxs_default_start. * Set all
trunks in group 'group_lines' rather than hard-coded 0 (for TE)
and 6 (for NT). * Document all parameters in genconf_parameters.
* xpp/perl_modules/Dahdi/Config/Params.pm (added),
xpp/dahdi_genconf, xpp/perl_modules/Dahdi/Config/Gen.pm,
xpp/perl_modules/Dahdi/Config/Gen/Users.pm,
xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm,
xpp/perl_modules/Dahdi/Config/Gen/System.pm,
xpp/perl_modules/Dahdi/Config/Gen/Unicall.pm: dahdi_genconf:
configuration handling cleanup. * Parsing genconf_parameters is
now in Dahdi::Config::Params All hard-coded defaults are there
too (in the item() method). * Dahdi::Config::Genconf is gone
(merged into Dahdi::Config::Gen) All semantic mapping is in the
constructor. * dahdi_genconf is now lean and mean. * Add some
implementation docs into these files.
* xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi-perl: Do
generate 'echocanceller' in system.conf Fixed a regression from
r6013 .
* xpp/perl_modules/Dahdi/Config/GenconfDefaults.pm (removed):
dahdi-perl: Remove an obsolete and unused module
GenconfDefaults.pm
* xpp/README.Astribank: README.Astribank: Killed one remaining
/sys/devices/xpp
2009-03-01 14:29 +0000 [r6054-6058] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/README.Astribank: More README updates
* xpp/perl_modules/Dahdi/Xpp/Xbus.pm, xpp/dahdi_genconf,
xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm,
xpp/perl_modules/Dahdi/Xpp/Xpd.pm: xpp-dahdi: freepbx code
generation; better procfs compatibility * dahdi_genconf -F will
generate chan_dahdi.conf for freepbx (like genzaptelconf -F) *
Better procfs compatibility for xpp modules.
* xpp/dahdi_drivers,
xpp/perl_modules/Dahdi/Config/GenconfDefaults.pm,
xpp/perl_modules/Dahdi/Config/Gen.pm,
xpp/perl_modules/Dahdi/Config/Gen/Users.pm: dahdi-perl: more
defensive coding and some docs
* xpp/perl_modules/Dahdi.pm: Dahdi.pm: the sample code should
actually work.
* xpp/fpga_load.c: fpga_load.c: Flush USB device buffer on startup.
Fixes some firmware loading issues.
2009-02-26 15:41 +0000 [r6041-6043] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Add PCI IDs of another
HFC-S card that zaphfc can handle.
* xpp/perl_modules/Dahdi/Chans.pm: Fix a typo for detecting zaphfc.
2009-02-18 21:20 +0000 [r6022] Doug Bailey <dbailey@digium.com>
* fxstest.c: Remove 8 bit restriction on setting indirect registers
(closes issue #14323) Reported by: alecdavis Patches:
fxstest_setindirect.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
2009-02-13 21:09 +0000 [r6013] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/dahdi_genconf, xpp/perl_modules/Dahdi/Config/Gen.pm (added),
xpp/perl_modules/Dahdi/Config/Gen/Users.pm (added),
xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm (added),
xpp/perl_modules/Dahdi/Config/Gen/System.pm (added),
xpp/perl_modules/Dahdi/Config/Gen (added),
xpp/perl_modules/Dahdi/Config/Gen/Unicall.pm (added): Rework
dahdi_genconf to have separate configuration generation modules.
'dahdi_genconf foo bar' will use the modules
Dahdi::Config::Gen::Foo and Dahdi::Config::Gen::Bar to generate
configuraion files. Extra formats can thus be added without
modifying dahdi_genconf and independently of DAHDI.
2009-02-08 11:04 +0000 [r5984] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/dahdi_genconf: dahdi_genconf: do reset default files list
when command-line has files This fixes a regression that was
added whwn handling of R2 was added. Originally: Xorcom rev 6683.
2009-01-28 18:49 +0000 [r5886] Shaun Ruffell <sruffell@digium.com>
* dahdi.init: Use the dahdihpec_enable tool instead of the
zaphpec_enable. Issue: DAHDI-233 patch by: cmoye
2009-01-27 15:14 +0000 [r5827] Doug Bailey <dbailey@digium.com>
* fxstest.c: Break VMWI ioctl calls into two separate calls to
maintain old revision compatibility (issue #14104) Reported by:
alecdavis Tested by: dbailey
2009-01-25 00:50 +0000 [r5808-5809] Sean Bright <sean.bright@gmail.com>
* dahdi.init: Use the debian commands on Gentoo. (closes issue
#14277) Reported by: darren1713 Patches: dahdi.init.txt uploaded
by darren1713 (license 116)
2009-01-22 15:45 +0000 [r5800] Doug Bailey <dbailey@digium.com>
* fxstest.c: Alec Davis change to modify vmwi test to use new ioctl
call structure and enhance functionality (issue #14104) Reported
by: alecdavis Patches: mwiioctl_structure_fxstest.diff.txt
uploaded by dbailey (license ) Tested by: alecdavis, dbailey
2009-01-20 18:54 +0000 [r5768] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/dahdi_genconf: dahdi_genconf: Finally set $fxs_default_start
= 'ks' rather than 'ls'
2009-01-19 15:19 +0000 [r5728] Doug Bailey <dbailey@digium.com>
* fxstest.c: Add test to excercise VMWI Enhance polarity test by
making sure the line is in an active state before testing (issue
#14104) Reported by: alecdavis Patches: dahditools-14104.diff.txt
uploaded by dbailey (license ) Tested by: alecdavis
2009-01-19 12:46 +0000 [r5705-5707] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: dahdi-tools: Delete test binaries on 'make clean'
* xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/xpp_sync: xpp_sync xpd
order fix.
* xpp/perl_modules/Dahdi/Span.pm: Dahdi-perl: Do detect Astribank
PRI modules.
2009-01-18 10:22 +0000 [r5671] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Xpp/Xbus.pm,
xpp/perl_modules/Dahdi/Chans.pm,
xpp/perl_modules/Dahdi/Xpp/Line.pm,
xpp/perl_modules/Dahdi/Span.pm,
xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/xpp_sync,
xpp/perl_modules/Dahdi/Xpp.pm: XPP tool updates to match r5663:
sysfs migration.
2009-01-16 14:18 +0000 [r5662] Sean Bright <sean.bright@gmail.com>
* configure, configure.ac: Properly detect GENERIC_HDLC_VERSION on
various kernel versions. (closes issue #14150) Reported by:
ccesario Patches: 20090115__bug14150.diff.txt uploaded by
seanbright (license 71) Tested by: ccesario
2009-01-15 12:47 +0000 [r5661] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/dahdi_genconf: Add an extra output format, 'asterisk': make
the configuration readable for an Asterisk configuration parser.
2009-01-14 20:06 +0000 [r5656-5660] Sean Bright <sean.bright@gmail.com>
* hdlctest.c: Whitespace and coding guidelines changes only.
* hdlctest.c: Fix some uninitialized variable warnings that were
causing hdlctest to not compile. Tested the program as well and
it appears to work correctly. (closes issue #13906) Reported by:
tzafrir
* dahdi_monitor.c: This commit deserves no comment.
* dahdi_monitor.c: The problem with using dahdi_copy_string here is
that it is guaranteed to NULL terminate the destination string,
which in this case was not correct. So revert back to using
strncpy and also decrease the buffer by 1 since it was reserving
an extra byte behind NULL for some reason. Fix suggested by
reporter. (closes issue #14103) Reported by: gork
2009-01-06 08:09 +0000 [r5643] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Hardware/PCI.pm: d00d must be in small
caps
2009-01-03 21:14 +0000 [r5626] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Span.pm: Dahdi::Span: Remove an
over-general span header "pri" pattern. Should fix #14061 .
2008-12-16 17:02 +0000 [r5555] Doug Bailey <dbailey@digium.com>
* fxotune.c: Add ability to use sine tables for systems that don't
have efficient floating point Add the ability to print out the
best results found during tuning Some format cleanup
2008-12-15 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools version 2.1.0.2 released.
2008-12-15 20:19 +0000 [r5533] Shaun Ruffell <sruffell@digium.com>
* Makefile: Overwrite the libtonezone.so.1.0 and libtonezone.so.1
links and libraries in order to maintain binary compatibility
with applications linked with dahdi-tools 2.0.0.
2008-12-15 11:19 +0000 [r5530-5532] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/README.Astribank: README.Astribank: minor formatting fix.
* xpp/README.Astribank: Document patching the xpp BRI driver for
now.
* dahdi_cfg.c: Allow the span timing to be up to 255. The test for
15 was ineffective anyway. Some drivers can use higher values.
See issue #13954 .
2008-12-11 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools version 2.1.0.1 released.
2008-12-11 22:45 +0000 [r5514] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* dahdi.init: Drop the "redhat" action at the 'stop' case for now:
RHEL4's 'action' only works with programs and not with functions.
2008-12-09 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools version 2.1.0 released.
2008-12-09 19:41 +0000 [r5461] Shaun Ruffell <sruffell@digium.com>
* modules.sample: Adding the wctc4xxp driver to the modules.sample.
2008-12-08 14:02 +0000 [r5452] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Span.pm: Fix detection of the B410P card.
All ports will be reported as TE. Tested by write_erase on
#asterisk-dev.
2008-12-05 00:24 +0000 [r5432-5440] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/dahdi_genconf: dahdi_genconf: add output type 'modules'
(/etc/dahdi/modules) Also improved documentation.
* xpp/README.Astribank: A minor formatting fix.
2008-12-01 18:41 +0000 [r5409-5426] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/README.Astribank: Next README.Astribank revision: Devices are
not under the bun. (And various other fixes)
* xpp/README.Astribank: README.Astribank catching up with sysfs,
dahdi and all. Many more entries in the table of contents. Most
of sysfs is documented.
2008-11-27 10:01 +0000 [r5402-5404] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, /: dahdi-tools: Re-add README.Astribank.html
generation.
* xpp/README.Astribank (added): Moving README.Astribank to
dahdi-tools .
2008-11-25 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools version 2.1.0-rc5 released.
2008-11-24 20:42 +0000 [r5379-5381] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* dahdi_cfg.c: dahdi_cfg: {} as per coding guidelines.
* dahdi_cfg.c: dahdi_cfg: Make the message about echo canceller
selection verbose.
* xpp/waitfor_xpds, xpp/test_parse.c, xpp/xpp_fxloader,
xpp/fpga_load.c: Add some missing copyright statements in the
xpp/ directory as well.
2008-11-21 23:26 +0000 [r5365-5366] Kevin P. Fleming <kpfleming@digium.com>
* dahdi_diag.c, hdlcstress.c, patgen.c, patlooptest.c,
hdlcverify.c, fxstest.c, timertest.c, hdlcgen.c, pattest.c,
dahdi_test.c, dahdi_speed.c, hdlctest.c: add copyright headers to
all the files that don't have them
* dahdi_monitor.c, fxotune.c: minor fixes to accommodate compilers
who check return result usage
2008-11-19 21:16 +0000 [r5334] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* dahdi.init: LSB init script comments.
2008-11-17 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools version 2.1.0-rc4 released.
2008-11-16 17:55 +0000 [r5308-5309] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* hdlcverify.c: Fix a compilation warning about signedness
* hdlcstress.c, patgen.c, patlooptest.c, pattest.c, hdlctest.c: Fix
usage strings and eliminate all traces of tor
2008-11-10 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools 2.1.0-rc3 released.
2008-11-06 22:38 +0000 [r5266] Doug Bailey <dbailey@digium.com>
* zonedata.c: set DTMF twist levels for listed EU countries to meet
TBR-21 standard of -9/-11 dB
2008-11-05 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools 2.1.0-rc2 released.
2008-11-05 19:17 +0000 [r5231] Shaun Ruffell <sruffell@digium.com>
* system.conf.sample: Update system.conf.sample to clarify BRI
configuration.
2008-11-04 15:58 +0000 [r5228] Shaun Ruffell <sruffell@digium.com>
* hdlcstress.c, hdlcverify.c, hdlcgen.c, hdlctest.c: Fix
compilation issues with the hdlc tests.
2008-11-03 20:14 +0000 [r5226] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Bump SONAME of libtonezone to 2.0: API and ABI have not
changed from Zaptel, but the library behaves differently.
2008-11-03 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools 2.1.0-rc1 released.
2008-10-28 20:42 +0000 [r5160] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Chans.pm: Get wcb4xxp listed in lsdahdi .
2008-10-28 18:34 +0000 [r5155] Shaun Ruffell <sruffell@digium.com>
* xpp/perl_modules/Dahdi/Hardware/PCI.pm, blacklist.sample,
modules.sample: Adding support for the wcb4xxp module.
2008-10-27 16:07 +0000 [r5134] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Xpp/Line.pm,
xpp/perl_modules/Dahdi/Xpp.pm: perl xpp: Support for FXO batter
attribute from sysfs (from r5133). Still falls back to reading
the battery status from procfs. Also fixes error message.
2008-10-16 18:03 +0000 [r5098-5099] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/waitfor_xpds (added), xpp/perl_modules/Dahdi/Xpp/Line.pm,
xpp/Makefile, xpp/perl_modules/Dahdi/Xpp/Xpd.pm, dahdi.init,
xpp/perl_modules/Dahdi/Xpp.pm: xpp: userspace support for sysfx
migration. The userspace side of dahdi-linux r5097. * Perl
modules default to using xpp sysfs but will fallback (with
warning) to procfs interface. * An additional
/usr/share/dahdi/waitfor_xpds to replace the line in the init.d
script.
* xpp/dahdi_genconf: dahdi_genconf: report channel number in case
of error.
2008-10-15 17:11 +0000 [r5094] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Chans.pm: Dahdi-perl: Fix detection of
empty slots in Rhino analog cards. Closes issue #13685
2008-10-12 23:09 +0000 [r5088] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/dahdi.cgi (added): A CGI script to give some information
about Zaptel through the Dahdi perl interface. A simple demo. Not
installed automatically.
2008-10-10 18:29 +0000 [r5079-5082] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Fix 'make config' for distros with no chkconfig and no
update-rc.d . This would cause the error on 'make config' for
"unknown command dahdi", and 'make -n config' would show that it
tries to run "dahdi defaults 15 30"
* dahdi_test.c: revert r5077 as r5078 fixes this better: now we can
use 8 entries in a line.
* dahdi_test.c: make dahdi_test's prints fit in one line. It makes
them slightly less "accurate", but we already use it in the
verbose messages, and dahdi_test is not really accurate.
2008-10-10 16:15 +0000 [r5072-5077] Sean Bright <sean.bright@gmail.com>
* dahdi_test.c: Wrap at 6 instead of 8 so we are sure to fit on an
80 column terminal.
* dahdi.init: Return the appropriate values to indicate if the
modules are loaded or not.
* dahdi.init: Add a status command to the DAHDI init script.
(closes issue #13655) Reported by: jcollie Patches:
0001-Add-a-trivial-status-command-to-the-init-script.patch
uploaded by jcollie (license 412) (Slight modification by me to
update the usage text)
2008-10-03 19:37 +0000 [r5044] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Config/GenconfDefaults.pm: When the config
file is not found: return "empty" data and don't die. Closes
issues #13615 .
2008-10-03 19:03 +0000 [r5038-5042] Sean Bright <sean.bright@gmail.com>
* dahdi_test.c: Whitespace and formatting only.
* dahdi_test.c: The first line was getting wrapped after 7 instead
of 8.
* xpp/genzaptelconf (removed), xpp/genzaptelconf.8 (removed):
Remove some leftovers.
* dahdi_scan.c, doc/dahdi_scan.8: Fix the dahdi_scan manpage
(s/dahdi_span/dahdi_scan/) and make dahdi_scan do what it is
advertised to do. Namely take span numbers on the command line.
(closes issue #13614) Reported by: jfinstrom
2008-09-29 Shaun Ruffell <sruffell@digium.com>
* dahdi-tools 2.0.0 released.
2008-09-25 15:47 +0000 [r4984] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* dahdi.init: dahdi_init: Fix a typo in xpp initialization (Stephen
Farrell)
2008-09-24 19:54 +0000 [r4977] Sean Bright <sean.bright@gmail.com>
* build_tools/menuselect-deps.in, configure, configure.ac,
dahdi.xml: Re-enable sethdlc by default in menuselect. Add
configure checks to properly discover the linux/hdlc.h
dependency.
2008-09-24 17:35 +0000 [r4975] Jason Parker <jparker@digium.com>
* dahdi.xml: Disable sethdlc in menuselect by default. This is how
it was in Zaptel, and it's causing issues. Ideally, this would
eventually be checked in the configure script.
2008-09-23 04:56 +0000 [r4969] Shaun Ruffell <sruffell@digium.com>
* README: Removing the note about running install_prereq since from
the README since that script is not present currently.
2008-09-16 18:26 +0000 [r4913-4915] Shaun Ruffell <sruffell@digium.com>
* dahdi.init: Remove the extra space printed after each line when a
module is loaded.
* dahdi_cfg.c: Close the /dev/dahdi/channel file handle if we're
unable to associate it with a particular channel.
* dahdi_cfg.c: Provide system error information if open on
/dev/dahdi/channel fails.
2008-09-12 18:06 +0000 [r4904] Sean Bright <sean.bright@gmail.com>
* Makefile, /, configure, configure.ac, makeopts.in: A few changes:
1) Start using menuselect trunk 2) Bring in changes similar to
those in asterisk trunk so that 'make menuselect' works as it
should from the dahdi-tools directory. 3) Stop looking for
curses/ncurses in the top level configure since nothing uses it
(except menuselect which will find it on it's own).
2008-09-11 20:52 +0000 [r4894] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/Makefile, xpp/xpp.rules (removed): Move udev rules xpp.rules
from dahdi-tools to dahdi-linux .
2008-09-11 15:45 +0000 [r4891-4893] Jason Parker <jparker@digium.com>
* Makefile: Fix installation of ifup-hdlc and init script when
using DESTDIR. (Step 2 of cleanup) (closes issue #13430) Reported
by: jcollie Patches:
0001-Fix-install-of-ifup-hdlc-when-installing-into-an-alt.patch
uploaded by jcollie (license 412) Tested by: qwell Note: Patch
from #13430 was extended to modify init script installation as
well.
* build_tools/genmodconf (removed), dahdi.rules (removed),
build_tools/genudevrules (removed): Remove files that aren't used
or are duplicated from dahdi-linux. Step 1 of cleanup.
2008-09-09 18:21 +0000 [r4882-4883] Jason Parker <jparker@digium.com>
* Makefile: Fix a few typos
* dahdi.init: Fix location of fxotune (closes issue #13428)
Reported by: eeman
2008-09-04 16:37 +0000 [r4860] Shaun Ruffell <sruffell@digium.com>
* Makefile, UPGRADE.txt: * Updates the instructions presented after
'make config' about where to set which modules are loaded. *
Update UPGRADE.txt to indicate where to set which modules are
loaded and where the module parameters are set. Issue# DAHDI-187
2008-09-03 19:38 +0000 [r4859] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, README, UPGRADE.txt: Slightly reformat UPDATES.txt for
asciidoc . Include it in README.html . See e.g.
http://docs.tzafrir.org.il/dahdi-tools/README.html#_upgrade_notes
Also fix some links in the README.
2008-08-28 21:40 +0000 [r4853-4855] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* dahdi.init: Simplify reading list of modules from
/etc/dahdi/modules .
* doc, xpp: Ignore generated HTML files.
* xpp/Makefile: Don't install genzaptelconf: deprecated, and
collides with Zaptel.
2008-08-27 17:13 +0000 [r4845-4850] Kevin P. Fleming <kpfleming@digium.com>
* modules.sample, dahdi.init: remove some silly echo statement
constructions in the init script clean up the modules.sample file
to have proper lists of cards supported by each module and remove
reference to dahdi_dummy since the init script takes care of
loading that module
* makeopts.in, fxotune.c: actually implement the rest of
--enable-dev-mode, and fix up more problems it found
* Makefile, configure, configure.ac, sethdlc.c, makeopts.in,
dahdi_cfg.c: add --enable-dev-mode support, and fix up a couple
of warnings found using it (only two, surprisingly)
2008-08-26 14:35 +0000 [r4833-4844] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, README, system.conf.sample: * Add a "docs" target to
generate documentation. * Demote/promote some headers. * Fix URL
for on-line copy of the README.
* xpp/perl_modules/Dahdi/Chans.pm: Fix default path of dahdi_cfg
(used for probing type of wctdm channels)
2008-08-25 16:12 +0000 [r4826-4827] Jason Parker <jparker@digium.com>
* dahdi_cfg.c: Fix more crazy formatting
* dahdi_cfg.c: Reverse some incorrect logic, and cleanup some very
ugly formatting in passing.
2008-08-24 10:53 +0000 [r4821-4822] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* dahdi_cfg.c: We've got a new "zap" string to zap.
* dahdi_cfg.c: dahdi_cfg.c: Reduce nesting in main() .
2008-08-24 05:54 +0000 [r4818] Matthew Fredrickson <creslin@digium.com>
* dahdi_cfg.c: Add support for 56 KB HDLC as well as selectable
rate in system.conf
2008-08-20 Kevin P. Fleming <kpfleming@digium.com>
* dahdi-tools version 2.0.0-rc2 released.
2008-08-17 15:50 +0000 [r4787] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Chans.pm: Dahdi::Chans: fix leftovers from
r4767 (handling of spaces) While r4767 solved some parsing
problems of channels with "strange" encoding names, it introduced
a new problem (e.g.: "RED" after "(In use)" which is fixed here.
2008-08-12 12:59 +0000 [r4764-4767] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/perl_modules/Dahdi/Chans.pm: Dahdi-perl: More robust parsing
of channel signalling types. Use a list of signalling types
rather than a regular experssion of a "word".
* xpp/dahdi_genconf, xpp/genconf_parameters: MFC/R2 configuration
generation support If optional setting 'pri_connection_type' is
set to R2, configure E1 spans as CAS and generate a unicall.conf
snippet (unicall-channels.conf).
* xpp/perl_modules/Dahdi/Hardware/PCI.pm, xpp/xpp_fxloader: *
xpp_fxloader: shows USB firmware version. * Update PCI IDs
database.
* xpp/lsdahdi, xpp/perl_modules/Dahdi/Chans.pm: Dahdi-perl: Add
alarms() method for channels. Use it in lsdahdi. * Better paring
of the /proc/dahdi/N channel lines for alarms * Provide it as a
separate alarms() method.
2008-08-06 Kevin P. Fleming <kpfleming@digium.com>
* dahdi-tools version 2.0.0-rc1 released.
distrib
>
Mandriva
>
2010.0
>
i586
>
media
>
contrib-release
>
by-pkgid
>
23b0dc25caacf0b2a46414819aa7ffdd
>
files
>
4
