<!doctype linuxdoc system>
<linuxdoc><article>
<titlepag>
<title>Cross compiling VLC for ARM-Linux based platforms</title>
<author>Marc Ariberti <tt><htmlurl url="mailto:marcari@videolan.org" name="<marcari@videolan.org>"></tt></author>
<author>Jean-Paul Saman <tt><htmlurl url="mailto:jpsaman@wxs.nl" name="<jpsaman@wxs.nl>"></tt></author>
<date>v0.0.2, 19 march 2004</date>
<abstract>
This document describes all the steps to cross compile vlc for ARM based
platforms. It describes how to build a cross compilation toolchain, how to
build the libraries needed by vlc and the compilation of the vlc itself.
</abstract>
</titlepag>
<toc>
<sect>
<heading>Introduction</heading>
<p>
This document is only a first draft. It does not intend to cover all the
subject. You may still have some problems at some steps or find better
way to do them. If you have any comment do not hesitate to contact us.
</p>
<sect1>
<heading>Which platforms are targeted ?</heading>
<p>
I will describe here how to compile vlc for an ARM based
PDA running linux. It includes for example :
<itemize>
<item>Compaq - iPaq (H36xx, H38xx,...), using Familiar Linux
<itemize>
<item>GNU Portable Environment (GPE)
<item>Opie
</itemize>
</item>
<item>YOPY/Linupy</item>
<item>Zaurus</item>
</itemize>
</p>
</sect1>
<sect1>
<heading>Requirements for cross-compilation</heading>
</sect1>
<sect1>
<heading>Why cross-compiling ?</heading>
<p>
It is of course possible to compile directly on the targeted platform.
But there are a lot of great advantages to cross-compile :
<itemize>
<item>The most important one is probably the speed, because a
desktop computer is most of the time faster than a PDA for
compilation.</item>
<item>Another big problem is that a complete compilation toolchain
does take a great amount of disk space. And this space is usually
very limited on embedded systems.</item>
<item>And there also may not be enough memory to compile big files.</item>
</itemize>
</p>
</sect1>
</sect>
<sect>
<heading>Building the toolchain</heading>
<sect1>
<heading>Prerequisite</heading>
<sect2>
<heading>Importants paths</heading>
<p>
During this section, we will use the following paths :
</p>
<p>I would personally advise to compile everything as a normal user and
then install everything as root.</p>
<sect3>
<heading>${SRCDIR}</heading>
<p>
This is where the sources will be located and where the compilation
will be done.
(eg: <tt>/usr/src</tt> or <tt>/home/foobar/arm-src</tt>).
</p>
</sect3>
<sect3>
<heading>${PREFIX}</heading>
<p>This is where you want to install your cross compilation toolchain.
It can be either installed system-wide (in <tt>/usr/local/arm/2.95.3</tt> for example). Installation steps (i.e. <tt>make install</tt>) will have
to be done as <tt>root</tt>.
Or it can be installed in user-land, for the user's own use (<tt>/home/foobar/arm/2.95.3</tt> for example).
In this paper, the chosen prefix is <tt>/usr/local/arm/2.95.3</tt>,
you will have to adapt the commands to what you choose..
</p>
</sect3>
</sect2>
<sect2>
<heading>Files needed</heading>
<p>Download the following files and put them in the <bf>${SRCDIR}</bf>.
Most of them are available on the <htmlurl url="http://www.videolan.org/vlc/download-sources.html" name="VideoLAN website">.
<itemize>
<item><tt>binutils-2.11.2.tar.gz</tt></item>
<item><tt>linux-2.4.19.tar.bz2</tt></item>
<item><tt>patch-2.4.19-rmk4.bz2</tt></item>
<item><tt>gcc-2.95.3.tar.gz</tt></item>
<item><tt>gcc-2.95.3.diff.bz2</tt></item>
<item><tt>gcc-2.95.3.diffbis.bz2</tt></item>
<item><tt>gcc-2.95.3.diff2</tt></item>
<item><tt>glibc-2.2.5.tar.gz</tt></item>
<item><tt>glibc-linuxthreads-2.2.5.tar.gz</tt></item>
<item><tt>SDL-1.2.5.tar.gz</tt></item>
<item><tt>glib-1.2.10.tar.gz</tt></item>
<item><tt>ffmpeg.tar.gz</tt></item>
<item><tt>mad-0.14.2b.tar.gz</tt></item>
<item><tt>flac-1.1.0.tar.gz</tt></item>
<item><tt>libdvbpsi-0.1.2.tar.gz</tt></item>
<item><tt>a52dec-0.7.4.tar.gz</tt></item>
</itemize>
</p>
</sect2>
</sect1>
<sect1>
<heading>Binutils</heading>
<p>Compiling binutils is pretty simple :
<tscreen><verb>
tar -xzf binutils-2.11.2.tar.gz
cd binutils-2.11.2
./configure --target=arm-linux --prefix=/usr/local/arm/2.95.3
make
make install
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>Preparing linux kernel</heading>
<p>
<tscreen><verb>
tar -xzf linux-2.4.19.tar.bz2
bunzip2 patch-2.4.19-rmk4.bz2
cd linux-2.4.19
patch -p1 < ../patch-2.4.19-rmk4.bz2
make clean ARCH=arm CROSS_COMPILE=arm-linux-
make ARCH=arm h3600_config
</verb></tscreen>
<bf>Do not forget</bf> to save the configuration even if no changes
are made !
<tscreen><verb>
make ARCH=arm menuconfig
make symlinks ARCH=arm CROSS_COMPILE=arm-linux-
mkdir -p /usr/local/arm/2.95.3/arm-linux/include
cp -Rf include/asm include/asm-arm include/linux \
/usr/local/arm/2.95.3/arm-linux/include
cd /usr/local/arm/2.95.3/arm-linux
ln -s include sys-linux
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>Basic cross compiler (gcc)</heading>
<p>
<tscreen><verb>
tar -xvzf gcc-2.95.3.tar.gz
bunzip2 gcc-2.95.3.diff.bz2
bunzip2 gcc-2.95.3.diffbis.bz2
patch -p1 -d gcc-2.95.3 < gcc-2.95.3.diff
patch -p1 -d gcc-2.95.3 < gcc-2.95.3.diffbis
cd gcc-2.95.3
./configure --target=arm-linux --disable-threads --enable-languages=c \
--prefix=/usr/local/arm/2.95.3 --with-headers=linux-2.4.19/include
make
make install
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>Compiling glibc</heading>
<p>
Depending on your target, you may choose another glibc version (eg: 2.1.3 for linupy 1.4)
<tscreen><verb>
tar -xvzf glibc-2.2.5.tar.gz
cd glibc-2.2.5
tar -xvzf ../glibc-linuxthreads-2.2.5.tar.gz
CC=arm-linux-gcc ./configure arm-linux --target=arm-linux \
--prefix=/usr/local/arm/2.95.3/arm-linux --enable-add-ons
</verb></tscreen>
The following step is quite long !
<tscreen><verb>
CC=arm-linux-gcc make
</verb></tscreen>
If you have problems compiling glibc due to pread/pwrite, edit <tt>sysdeps/unix/sysv/linux/kernel-features.h</tt>
and turn <tt>__ASSUME_PREAD_SYSCALL</tt> and
<tt>__ASSUME_PWRITE_SYSCALL</tt> from 1 to 0.
<tscreen><verb>
CC=arm-linux-gcc make install
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>Full cross compiler (gcc)</heading>
<p>
<tscreen><verb>
rm -Rf gcc-2.95.3
tar -xvzf gcc-2.95.3.tar.gz
patch -p1 -d gcc-2.95.3 < gcc-2.95.3.diff
patch -p1 -d gcc-2.95.3 < gcc-2.95.3.diff2
cd gcc-2.95.3
./configure --target=arm-linux --prefix=/usr/local/arm/2.95.3
make
make install
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>Compiling linux kernel</heading>
</sect1>
<sect1>
<heading>Misc</heading>
<p>
Add <tt>/usr/local/arm/2.95.3/bin</tt> to your PATH. Add the following line (depends on your shell)
to your shell's configuration file :
<tscreen><verb>
export PATH=/usr/local/arm/2.95.3/bin:$PATH
</verb></tscreen>
I would advise you to completely log out and then log in again, so that
the change would be taken into account. You can now check that when you
type <tt>arm-linux-gcc</tt>, it launches the cross-compiler.
</p>
<p>
Next are some packages that you may compile by yourself, but I found
it was easier to use the precompiled packages. You can take them
at <htmlurl url="http://ipkgfind.handhelds.org/" name="ipkgfind">.
You may find packages with other version numbers which should not be
a problem.
<descrip>
<tag><tt>libgcc1_3.1.1-1_arm.ipk</tt></tag>
This provides libgcc.so.1 which is needed to compile some libraries.
<tag><tt>xlibs_4.1-5_arm.ipk</tt>, <tt>xlibs-dev_4.1.0-16_arm.ipk</tt></tag>
Those are the libraries ans the development files for X windows.
<tag><tt>zlib1g_1.1.4-3_arm.ipk</tt>, <tt>zlib1g-dev_1.1.3-fam1_arm.ipk</tt></tag>
These libraries are needed by some libraries to compile.
</descrip>
Install these packages on your compiler box in <tt>/usr/local/arm/2.95.3/arm-linux</tt> :
You can use the script <tt>install.sh</tt> :
<tscreen><verb>
#!/bin/sh
# script to install .ipk into the arm-toolchain
# usage : ./install.sh foobar.ipk
if ! tar -xvzf $1 2> /dev/null
then
ar xv $1 2> /dev/null
fi
cp data.tar.gz /usr/local/arm/2.95.3/arm-linux
cd /usr/local/arm/2.95.3/arm-linux
tar -xvzf data.tar.gz
</verb></tscreen>
</p>
</sect1>
</sect>
<sect>
<heading>Setting up Opie cross-compile environment</heading>
<p>Download the Opie SDK from the website <htmlurl url="http://opie.handhelds.org/" name="OPIE website">
using the menuitem "Download Opie SDK" or try the direct link here: <htmlurl url="ftp://ftp.handhelds.org/zecke/" name="Download Opie SDK">.
Download all files to your ${SOURCES}/opie directory.
</p>
<sect1>
<heading>Opie SDK</heading>
<p>The Opie SDK does not come with a README file or installation instructions.
I give them here instead. There are two tar files in the download a OpieSDK.tar.gz2 and a kdevelop_src.tar.bz2.
The last file is a modified kdevelop for use with the OpieSDK. In this tutorial we will not use that.
Unpack OpieSDK.tar.bz2 in your sources <tt>cd ${SOURCES}/opie</tt> directory.
<tscreen><verb>
cd ${SOURCES}/opie
tar -xjvf OpieSdk.tar.bz2
</verb></tscreen>
It creates a directories structure <tt>${SOURCES}/opie/opt/OpieSDK</tt>. Inside that directory a script is present to
<tt>start_kdevelop</tt>. Modify this script so that it uses the correct paths for you setup.
<tscreen><verb>
#!/bin/sh
source ${SOURCES}/opie/opt/OpieSdk/dev_env
export KDEDIR=${SOURCES}/opie/opt/OpieSdk/kde
export PATH=${SOURCES}/opie/opt/OpieSdk/kde/bin:$PATH
kbuildsycoca
kdevelop
</verb></tscreen>
Save the script. Do the same with the script <tt>arm_source</tt>
<tscreen><verb>
source ${SOURCES}/opie/opt/OpieSdk/dev_env
export QTDIR=$QTDIR_ARM
export OPIEDIR=$OPIEDIR_ARM
</verb></tscreen>
Save the script and modify the script <tt>host_source</tt> in the same manner as above.
<tscreen><verb>
source ${SOURCES}/opie/opt/OpieSdk/dev_env
export QTDIR=$QTDIR_NAT
export OPIEDIR=$OPIEDIR_NAT
</verb></tscreen>
Save the script and modify the script <tt>dev_env</tt> in the same manner as above.
<tscreen><verb>
export PYTHONPATH=${SOURCES}/opie/opt/OpieSdk/python/opie:${SOURCES}/opie/opt/OpieSdk/python/sip
export PATH=/usr/local/arm/2.95.3/bin:/opt/OpieSdk/host_tools:${SOURCES}/opie/opt/OpieSdk/opie/x86/qt-2.3.7/bin:$PATH
export PATH=${SOURCES}/opie/opt/OpieSdk/opie/x86/qmake:$PATH
export QTDIR_NAT=${SOURCES}/opie/opt/OpieSdk/opie/x86/qt-2.3.7
export OPIEDIR_NAT=${SOURCES}/opie/opt/OpieSdk/opie/x86/sdk
export QTDIR_ARM=${SOURCES}/opie/opt/OpieSdk/opie/arm/qt-2.3.7
export OPIEDIR_ARM=${SOURCES}/opie/opt/OpieSdk/opie/arm/sdk
export OPIE_SDK_BASE=${SOURCES}/opie/opt/OpieSdk/
export OPIE_SDK_QMAKE_BASE=${SOURCES}/opie/opt/OpieSdk/opie/x86/sdk/mkspecs/qws/
export OPIE_DOC=${SOURCES}/opie/opt/OpieSdk/apidocs
export LD_LIBRARY_PATH=${SOURCES}/opie/opt/OpieSdk/sip/lib:$OPIEDIR_NAT/lib:$QTDIR_NAT/lib:$LD_LIBRARY_PATH
export OPIE_LANGUAGES=de:en:cz:da:dk:es:fr:hu:it:ja:ko:lv:mk:nl:no:pl:pt:pt_BR:ru:sl:zh_CN:zh_TW
</verb></tscreen>
The symbolic linke to the tool <tt>qmake</tt> points now to the wrong place. We need to fix this symbolic link.
Here is the way to do that.
<tscreen><verb>
cd host_tools
ln -sf /home/jpsaman/src/opie/opt/OpieSdk/opie/x86/sdk/qmake/qmake qmake
cd ../
</verb></tscreen>
Now it is time to fire up our development environment and start hacking in Opie.
</p>
</sect1>
</sect>
<sect>
<heading>Cross compiling libraries needed by vlc</heading>
<p>
Download <tt>ipaq-config.site</tt> to ${SOURCES}.
When downloading source tarballs copy them to your ${SOURCES} directory.
Each section is supposed to begin with <tt>cd ${SOURCES}</tt>.
</p>
<sect1>
<heading>SDL</heading>
<p>
It is not clean at all but did not found a better working method.
Using config.site
it compiles well, but when linking with vlc there are problems !
</p>
<p>
<tt>/usr/local/arm/2.95.3/arm-linux/bin</tt> should contain the cross
compiler without the prefix <tt>arm-linux-</tt>.
<tscreen><verb>
tar -xvzf SDL-1.2.5.tar.gz
cd SDL-1.2.5
./configure --enable-release --target=arm-linux --host=arm-linux \
--disable-esd \
--prefix=/usr/local/arm/2.95.3/arm-linux/usr \
--x-includes=/usr/local/arm/2.95.3/arm-linux/usr/X11R6/include \
--x-libraries=/usr/local/arm/2.95.3/arm-linux/usr/X11R6/lib \
--disable-video-opengl
export PATH=/usr/local/arm/2.95.3/arm-linux/bin:$PATH
make && make install
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>Glib/GTK+</heading>
<p>
<tscreen><verb>
tar -xvzf glib-1.2.10.tar.gz
cd glib-1.2.10
CONFIG_SITE=../ipaq-config.site ./configure \
--prefix=/usr/local/arm/2.95.3/arm-linux/usr
make
make install
cd ..
tar -xvzf gtk+-1.2.10.tar.gz
cd gtk+-1.2.10
CONFIG_SITE=../ipaq-config.site ./configure \
--prefix=/usr/local/arm/2.95.3/arm-linux/usr --with-glib=../glib-1.2.10
make
make install
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>ffmpeg</heading>
<p>
<tscreen><verb>
tar -xvzf ffmpeg.tar.gz
cd ffmpeg
./configure --cpu=armv4l --cc=arm-linux-gcc --disable-mmx \
--prefix=/usr/local/arm/2.95.3/arm-linux/usr --enable-shared
cd libavcodec
make
</verb></tscreen>
Vlc does not require that you install ffmpeg.
</p>
</sect1>
<sect1>
<heading>mad</heading>
<p>
<tscreen><verb>
tar -xvzf mad-0.14.2b.tar.gz
cd mad-0.14.2b
./configure --enable-release --target=arm-linux --host=arm-linux \
--disable-esd \
--prefix=/usr/local/arm/2.95.3/arm-linux/usr \
--x-includes=/usr/local/arm/2.95.3/arm-linux/usr/X11R6/include \
--x-libraries=/usr/local/arm/2.95.3/arm-linux/usr/X11R6/lib \
--disable-video-opengl
export PATH=/usr/local/arm/2.95.3/arm-linux/bin:$PATH
make
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>gpe</heading>
</sect1>
<sect1>
<heading>tremor</heading>
<p>
Tremor is an integer decoder for the vorbis audio codec. Download the
source through CVS at the <htmlurl url="http://www.xiph.org/" name="xiph.org"> website.
</p>
<p>
Log into CVS using the password : <tt>anoncvs</tt>.
<tscreen><verb>
cvs -d :pserver:anoncvs@xiph.org:/usr/local/cvsroot login
cvs -d :pserver:anoncvs@xiph.org:/usr/local/cvsroot co Tremor
cd Tremor
CONFIG_SITE=../ipaq-config.site ./configure \
--prefix=/usr/local/arm/2.95.3/arm-linux/usr
make
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>ogg</heading>
<p>
For ogg, it is the same as Tremor.
<tscreen><verb>
cvs -d :pserver:anoncvs@xiph.org:/usr/local/cvsroot login
cvs -d :pserver:anoncvs@xiph.org:/usr/local/cvsroot co ogg
cd ogg
CONFIG_SITE=../ipaq-config.site ./configure \
--prefix=/usr/local/arm/2.95.3/arm-linux/usr
make
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>flac</heading>
<p>
<tscreen><verb>
tar -xvzf flac-1.1.0.tar.gz
cd flac-1.1.0
./configure --enable-release --host=arm-linux --target=arm-linux \
--prefix=/usr/local/arm/2.95.3/arm-linux/usr
</verb></tscreen>
It will probably fail (due to the xmms plugin), but it is not a problem,
we will continue installation by hand.
<tscreen><verb>
cp -Rf include/FLAC /usr/local/arm/2.95.3/arm-linux/include
cd src/libFLAC
make install
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>libdvbpsi</heading>
<p>
<tscreen><verb>
tar -xvzf libdvbpsi-0.1.2.tar.gz
cd libdvbpsi-0.1.2
./bootstrap
./configure --target=arm-linux --host=arm-linux
make
</verb></tscreen>
</p>
</sect1>
<sect1>
<heading>a52</heading>
<p>
<tscreen><verb>
tar -xvzf a52dec-0.7.4.tar.gz
cd a52dec-0.7.4
./configure --enable-release --host=arm-linux --target=arm-linux \
--prefix=/usr/local/arm/2.95.3/arm-linux/usr
make && make install
</verb></tscreen>
</p>
</sect1>
</sect>
<sect>
<heading>Cross compiling vlc itself</heading>
<p>
First of all, run the <tt>./bootstrap</tt> script.
Then run one of the <tt>ipkg/rules.*</tt>, according to what you want to compile.
Finally you just have to type make and you'll get a stand alone vlc.
</p>
<p>
Run <tt>arm-linux-strip</tt> to remove symbols and so the size of the file,
and now you can test it easily on your PDA.
</p>
<p>
Enjoy !
</p>
</sect>
</article></linuxdoc>
distrib
>
Mandriva
>
2010.0
>
i586
>
media
>
contrib-release
>
by-pkgid
>
3099648295c1ca8029ff6964c8cd9263
>
files
>
74
