proc Blt_ActiveLegend { graph } {
    $graph legend bind all <Enter> [list blt::ActivateLegend $graph ]
    $graph legend bind all <Leave> [list blt::DeactivateLegend $graph]
    $graph legend bind all <ButtonPress-1> [list blt::HighlightLegend $graph]
}

proc Blt_Crosshairs { graph } {
    blt::Crosshairs $graph 
}

proc Blt_ZoomStack { graph } {
    blt::ZoomStack $graph
}

proc Blt_PrintKey { graph } {
    blt::PrintKey $graph
}

proc Blt_ClosestPoint { graph } {
    blt::ClosestPoint $graph
}

#
# The following procedures that reside in the "blt" namespace are
# supposed to be private.
#

proc blt::ActivateLegend { graph } {
    set elem [$graph legend get current]
    $graph legend activate $elem
}
proc blt::DeactivateLegend { graph } {
    set elem [$graph legend get current]
    $graph legend deactivate $elem
}

proc blt::HighlightLegend { graph } {
    set elem [$graph legend get current]
    set relief [$graph element cget $elem -labelrelief]
    if { $relief == "flat" } {
	$graph element configure $elem -labelrelief raised
	$graph element activate $elem
    } else {
	$graph element configure $elem -labelrelief flat
	$graph element deactivate $elem
    }
}

proc blt::Crosshairs { graph { event "Any-Motion" } } {
    $graph crosshairs on
    bind bltCrosshairs <$event>   {
	%W crosshairs configure -position @%x,%y 
    }
    $graph crosshairs configure -color red
    blt::AddBindTag $graph bltCrosshairs  
}

proc blt::InitStack { graph } {
    global zoomInfo
    set zoomInfo($graph,interval) 100
    set zoomInfo($graph,afterId) 0
    set zoomInfo($graph,A,x) {}
    set zoomInfo($graph,A,y) {}
    set zoomInfo($graph,B,x) {}
    set zoomInfo($graph,B,y) {}
    set zoomInfo($graph,stack) {}
    set zoomInfo($graph,corner) A
}

proc blt::ZoomStack { graph {start "ButtonPress-1"} {reset "ButtonPress-3"} } {
    global zoomInfo zoomMod
    
    blt::InitStack $graph
    
    if { [info exists zoomMod] } {
	set modifier $zoomMod
    } else {
	set modifier ""
    }
    bind bltZoomGraph <${modifier}${start}> { blt::SetZoomPoint %W %x %y }
    bind bltZoomGraph <${modifier}${reset}> { 
	if { [%W inside %x %y] } { 
	    blt::ResetZoom %W 
	}
    }
    blt::AddBindTag $graph bltZoomGraph 
}

proc blt::PrintKey { graph {event "Shift-ButtonRelease-3"} } {
    bind bltPrintGraph <$event>  { Blt_PostScriptDialog %W }
    blt::AddBindTag $graph bltPrintGraph 
}

proc blt::ClosestPoint { graph {event "Control-ButtonPress-2"} } {
    bind bltClosestPoint <$event>  {
	blt::FindElement %W %x %y
    }
    blt::AddBindTag $graph bltClosestPoint 
}

proc blt::AddBindTag { graph name } {
    set oldtags [bindtags $graph]
    if { [lsearch $oldtags $name] < 0 } {
	bindtags $graph [concat $name $oldtags]
    }
}

proc blt::FindElement { graph x y } {
    if ![$graph element closest $x $y info -interpolate yes] {
	beep
	return
    }
    # --------------------------------------------------------------
    # find(name)		- element Id
    # find(index)		- index of closest point
    # find(x) find(y)		- coordinates of closest point
    #				  or closest point on line segment.
    # find(dist)		- distance from sample coordinate
    # --------------------------------------------------------------
    set markerName "bltClosest_$info(name)"
    catch { $graph marker delete $markerName }
    $graph marker create text -coords { $info(x) $info(y) } \
	-name $markerName \
	-text "$info(name): $info(dist)\nindex $info(index)" \
	-font *lucida*-r-*-10-* \
	-anchor center -justify left \
	-yoffset 0 -bg {} 

    set coords [$graph invtransform $x $y]
    set nx [lindex $coords 0]
    set ny [lindex $coords 1]

    $graph marker create line -coords "$nx $ny $info(x) $info(y)" \
	-name line.$markerName 

    blt::FlashPoint $graph $info(name) $info(index) 10
    blt::FlashPoint $graph $info(name) [expr $info(index) + 1] 10
}

proc blt::FlashPoint { graph name index count } {
    if { $count & 1 } {
        $graph element deactivate $name 
    } else {
        $graph element activate $name $index
    }
    incr count -1
    if { $count > 0 } {
	after 200 blt::FlashPoint $graph $name $index $count
	update
    } else {
	eval $graph marker delete [$graph marker names "bltClosest_*"]
    }
}

proc blt::GetCoords { graph x y index } {
    global zoomInfo
    if { [$graph cget -invertxy] } {
	set zoomInfo($graph,$index,x) $y
	set zoomInfo($graph,$index,y) $x
    } else {
	set zoomInfo($graph,$index,x) $x
	set zoomInfo($graph,$index,y) $y
    }
}

proc blt::MarkPoint { graph index } {
    global zoomInfo
    set x [$graph xaxis invtransform $zoomInfo($graph,$index,x)]
    set y [$graph yaxis invtransform $zoomInfo($graph,$index,y)]
    set marker "zoomText_$index"
    set text [format "x=%.4g\ny=%.4g" $x $y] 

    if [$graph marker exists $marker] {
     	$graph marker configure $marker -coords { $x $y } -text $text 
    } else {
    	$graph marker create text -coords { $x $y } -name $marker \
   	    -font *lucida*-r-*-10-* \
	    -text $text -anchor center -bg {} -justify left
    }
}

proc blt::DestroyZoomTitle { graph } {
    global zoomInfo

    if { $zoomInfo($graph,corner) == "A" } {
	catch { $graph marker delete "zoomTitle" }
    }
}

proc blt::PopZoom { graph } {
    global zoomInfo

    set zoomStack $zoomInfo($graph,stack)
    if { [llength $zoomStack] > 0 } {
	set cmd [lindex $zoomStack 0]
	set zoomInfo($graph,stack) [lrange $zoomStack 1 end]
	eval $cmd
	blt::ZoomTitleLast $graph
	busy hold $graph
	update
	after 2000 "blt::DestroyZoomTitle $graph"
	busy release $graph
    } else {
	catch { $graph marker delete "zoomTitle" }
    }
}

# Push the old axis limits on the stack and set the new ones

proc blt::PushZoom { graph } {
    global zoomInfo
    eval $graph marker delete [$graph marker names "zoom*"]
    if { [info exists zoomInfo($graph,afterId)] } {
	after cancel $zoomInfo($graph,afterId)
    }
    set x1 $zoomInfo($graph,A,x)
    set y1 $zoomInfo($graph,A,y)
    set x2 $zoomInfo($graph,B,x)
    set y2 $zoomInfo($graph,B,y)

    if { ($x1 == $x2) || ($y1 == $y2) } { 
	# No delta, revert to start
	return
    }
    set cmd {}
    foreach margin { xaxis yaxis x2axis y2axis } {
	foreach axis [$graph $margin use] {
	    set min [$graph axis cget $axis -min] 
	    set max [$graph axis cget $axis -max]
	    set c [list $graph axis configure $axis -min $min -max $max]
	    append cmd "$c\n"
	}
    }
    set zoomInfo($graph,stack) [linsert $zoomInfo($graph,stack) 0 $cmd]

    busy hold $graph 
    # This update lets the busy cursor take effect.
    update

    foreach margin { xaxis x2axis } {
	foreach axis [$graph $margin use] {
	    set min [$graph axis invtransform $axis $x1]
	    set max [$graph axis invtransform $axis $x2]
            if { $min!=$max } {
	      if { $min > $max } { 
		 $graph axis configure $axis -min $max -max $min
	      } else {
		 $graph axis configure $axis -min $min -max $max
	      }
	    }
	}
    }
    foreach margin { yaxis y2axis } {
	foreach axis [$graph $margin use] {
	    set min [$graph axis invtransform $axis $y1]
	    set max [$graph axis invtransform $axis $y2]
            if { $min!=$max } {
	      if { $min > $max } { 
		  $graph axis configure $axis -min $max -max $min
	      } else {
		  $graph axis configure $axis -min $min -max $max
	      }
	    }
	}
    }
    # This "update" forces the graph to be redrawn
    update
    
    busy release $graph
}

#
# This routine terminates either an existing zoom, or pops back to
# the previous zoom level (if no zoom is in progress).
#

proc blt::ResetZoom { graph } {
    global zoomInfo 

    if { ![info exists zoomInfo($graph,corner)] } {
	blt::InitStack $graph 
    }
    eval $graph marker delete [$graph marker names "zoom*"]

    if { $zoomInfo($graph,corner) == "A" } {
	# Reset the whole axis
	blt::PopZoom $graph
    } else {
	global zoomMod

	if { [info exists zoomMod] } {
	    set modifier $zoomMod
	} else {
	    set modifier "Any-"
	}
	set zoomInfo($graph,corner) A
	bind $graph <${modifier}Motion> { }
    }
}

option add *zoomTitle.font	  -*-helvetica-medium-R-*-*-18-*-*-*-*-*-*-* 
option add *zoomTitle.shadow	  yellow4
option add *zoomTitle.foreground  yellow1
option add *zoomTitle.coords	  "-Inf Inf"

proc blt::ZoomTitleNext { graph } {
    global zoomInfo
    set level [expr [llength $zoomInfo($graph,stack)] + 1]
    if { [$graph cget -invertxy] } {
	set coords "-Inf -Inf"
    } else {
	set coords "-Inf Inf"
    }
    $graph marker create text -name "zoomTitle" -text "Zoom #$level" \
	-coords $coords -bindtags "" -anchor nw
}

proc blt::ZoomTitleLast { graph } {
    global zoomInfo

    set level [llength $zoomInfo($graph,stack)]
    if { $level > 0 } {
     	$graph marker create text -name "zoomTitle" -anchor nw \
	    -text "Zoom #$level" 
    }
}

proc blt::SetZoomPoint { graph x y } {
    global zoomInfo zoomMod
    if { ![info exists zoomInfo($graph,corner)] } {
	blt::InitStack $graph
    }
    blt::GetCoords $graph $x $y $zoomInfo($graph,corner)
    if { [info exists zoomMod] } {
	set modifier $zoomMod
    } else {
	set modifier "Any-"
    }
    if { $zoomInfo($graph,corner) == "A" } {
	if { ![$graph inside $x $y] } {
	    return
	}
	# First corner selected, start watching motion events

	#blt::MarkPoint $graph A
	blt::ZoomTitleNext $graph 

	bind $graph <${modifier}Motion> { 
	    blt::GetCoords %W %x %y B
    	    #blt::MarkPoint $graph B
	    blt::Box %W
	}
	set zoomInfo($graph,corner) B
    } else {
	# Delete the modal binding
	bind $graph <${modifier}Motion> { }
	blt::PushZoom $graph 
	set zoomInfo($graph,corner) A
    }
}

option add *zoomOutline.dashes		4	
option add *zoomTitle.anchor		nw
option add *zoomOutline.lineWidth	2
option add *zoomOutline.xor		yes

proc blt::MarchingAnts { graph offset } {
    global zoomInfo

    incr offset
    if { [$graph marker exists zoomOutline] } {
	$graph marker configure zoomOutline -dashoffset $offset 
	set interval $zoomInfo($graph,interval)
	set id [after $interval [list blt::MarchingAnts $graph $offset]]
	set zoomInfo($graph,afterId) $id
    }
}

proc blt::Box { graph } {
    global zoomInfo

    if { $zoomInfo($graph,A,x) > $zoomInfo($graph,B,x) } { 
	set x1 [$graph xaxis invtransform $zoomInfo($graph,B,x)]
	set y1 [$graph yaxis invtransform $zoomInfo($graph,B,y)]
	set x2 [$graph xaxis invtransform $zoomInfo($graph,A,x)]
	set y2 [$graph yaxis invtransform $zoomInfo($graph,A,y)]
    } else {
	set x1 [$graph xaxis invtransform $zoomInfo($graph,A,x)]
	set y1 [$graph yaxis invtransform $zoomInfo($graph,A,y)]
	set x2 [$graph xaxis invtransform $zoomInfo($graph,B,x)]
	set y2 [$graph yaxis invtransform $zoomInfo($graph,B,y)]
    }
    set coords { $x1 $y1 $x2 $y1 $x2 $y2 $x1 $y2 $x1 $y1 }
    if { [$graph marker exists "zoomOutline"] } {
	$graph marker configure "zoomOutline" -coords $coords 
    } else {
	set X [lindex [$graph xaxis use] 0]
	set Y [lindex [$graph yaxis use] 0]
	$graph marker create line -coords $coords -name "zoomOutline" \
	    -mapx $X -mapy $Y
	set interval $zoomInfo($graph,interval)
	set id [after $interval [list blt::MarchingAnts $graph 0]]
	set zoomInfo($graph,afterId) $id
    }
}


proc Blt_PostScriptDialog { graph } {
    global POSTSCRIPTWINDOW
    global POSTSCRIPTGRAPH
    set top $graph.top
    toplevel $top
    wm title $top "Postscript out" 
    set POSTSCRIPTWINDOW $top
    set POSTSCRIPTGRAPH $graph
    foreach var { center landscape maxpect preview decorations padx 
	pady paperwidth paperheight width height colormode } {
	global $graph.$var
	set $graph.$var [$graph postscript cget -$var]
    }
    set row 1
    set col 0
    label $top.title -text "PostScript Options"
    blt::table $top $top.title -cspan 7
    foreach bool { center landscape maxpect preview decorations } {
	set w $top.$bool-label
	label $w -text "-$bool" -font *courier*-r-*12* 
	blt::table $top $row,$col $w -anchor e -pady { 2 0 } -padx { 0 4 }
	set w $top.$bool-yes
	global $graph.$bool
	radiobutton $w -text "yes" -variable $graph.$bool -value 1
	blt::table $top $row,$col+1 $w -anchor w
	set w $top.$bool-no
	radiobutton $w -text "no" -variable $graph.$bool -value 0
	blt::table $top $row,$col+2 $w -anchor w
	incr row
    }
    label $top.modes -text "-colormode" -font *courier*-r-*12* 
    blt::table $top $row,0 $top.modes -anchor e  -pady { 2 0 } -padx { 0 4 }
    set col 1
    foreach m { color greyscale } {
	set w $top.$m
	radiobutton $w -text $m -variable $graph.colormode -value $m
	blt::table $top $row,$col $w -anchor w
	incr col
    }
    set row 1
    frame $top.sep -width 2 -bd 1 -relief sunken
    blt::table $top $row,3 $top.sep -fill y -rspan 6
    set col 4
    foreach value { padx pady paperwidth paperheight width height } {
	set w $top.$value-label
	label $w -text "-$value" -font *courier*-r-*12* 
	blt::table $top $row,$col $w -anchor e  -pady { 2 0 } -padx { 0 4 }
	set w $top.$value-entry
	global $graph.$value
	entry $w -textvariable $graph.$value -width 8
	blt::table $top $row,$col+1 $w -cspan 2 -anchor w -padx 8
	incr row
    }
    blt::table configure $top c3 -width .125i
    button $top.cancel -text "Cancel" -command "destroy $top"
    blt::table $top $row,0 $top.cancel  -width 1i -pady 2 -cspan 3
    button $top.reset -text "Reset" -command "destroy $top"
    #blt::table $top $row,1 $top.reset  -width 1i
    button $top.print -text "Print" -command {blt::ResetPostScript $POSTSCRIPTGRAPH; destroy $POSTSCRIPTWINDOW }
    blt::table $top $row,4 $top.print  -width 1i -pady 2 -cspan 2
}

proc blt::ResetPostScript { graph } {
    foreach var { center landscape maxpect preview decorations padx 
	pady paperwidth paperheight width height colormode } {
	global $graph.$var
	set old [$graph postscript cget -$var]
	if { [catch {$graph postscript configure -$var [set $graph.$var]}] != 0 } {
	    $graph postscript configure -$var $old
	    set $graph.$var $old
	}
    }
   set types {{"Postscript File"		{.ps}	} {"Encapsulated Postscript File"		{.eps}	}};
    set PSFILE [tk_getSaveFile -filetypes $types -parent . -initialfile Untitled -defaultextension .ps] 
    if {[string length $PSFILE]!=0} {
       $graph postscript output $PSFILE
    }
}