Sophie: rt-3.6.7-3mdv2010.0 noarch

rt-3.6.7-3mdv2010.0.noarch.rpm

RT is an enterprise-grade issue tracking system. It allows organizations
to keep track of what needs to get done, who is working on which tasks,
what's already been done, and when tasks were (or weren't) completed.

RT doesn't cost anything to use, no matter how much you use it; it
is freely available under the terms of Version 2 of the GNU General
Public License.

RT is commercially-supported software. To purchase support, training,
custom development, or professional services, please get in touch with
us at sales@bestpractical.com.

Jesse Vincent
Best Practical Solutions, LLC
March, 2005

REQUIRED PACKAGES:
------------------

o Perl 5.8.3 or later (http://www.perl.com).

Perl versions prior to 5.8.3 contain bugs that could result
in data corruption. We recommend strongly that you use 5.8.3
or newer.

o A supported SQL database

Currently supported: Mysql 4.0.13 or later with InnoDB support.
Postgres 7.2 or later.
Oracle 9iR2 or later.
SQLite 3.0. (Not recommended for production)

o Apache version 1.3.x or 2.x (http://httpd.apache.org)
with mod_perl -- (http://perl.apache.org )
or a webserver with FastCGI support (www.fastcgi.com)

Compiling mod_perl on Apache 1.3.x as a DSO has been known
to have massive stability problems and is not recommended.

mod_perl 1.x must be built with EVERYTHING=1

RT's FastCGI handler needs to access RT's configuration file.

o Various and sundry perl modules
A tool included with RT takes care of the installation of
most of these automatically during the install process.

The tool supplied with RT uses Perl's CPAN system
(http://www.cpan.org) to install modules. Some operating
systems package all or some of the modules required, and
you may be better off installing the modules that way.

GENERAL INSTALLATION
--------------------

This is a rough guide to installing RT. For more detail, you'll
want to read a more comprehensive installation guide at:

http://wiki.bestpractical.com/index.cgi?InstallationGuides

1 Unpack this distribution other than where you want to install RT

To do this cleanly, run the following command:

tar xzvf rt.tar.gz -C /tmp

2 Run the "configure" script.

./configure --help to see the list of options
./configure (with the flags you want)

RT defaults to installing in /opt/rt3 with MySQL as its database. It
tries to guess which of www-data, www, apache or nobody your webserver
will run as, but you can override that behavior.

3 Make sure that RT has everything it needs to run.

Check for missing dependencies by running:

make testdeps

4 If the script reports any missing dependencies, install them by hand
or run the following command as a user who has permission to install perl
modules on your system:

make fixdeps

5 Check to make sure everything was installed properly.

make testdeps

It might sometimes be necessary to run "make fixdeps" several times
to install all necessary perl modules.

6 If this is a new installation:

As a user with permission to install RT in your chosen directory, type:

make install

Set up etc/RT_SiteConfig.pm in your RT installation directory.
You'll need to add any values you need to change from the defaults
in etc/RT_Config.pm

As a user with permission to read RT's configuration file, type:

make initialize-database

If the make fails, type:

make dropdb

and start over from step 6

7 If you're upgrading from RT 3.0 or newer:

Read through the UPGRADING document included in this distribution.

It includes special upgrade instructions that will help you get this
new version of RT up and running smoothly.

As a user with permission to install RT in your chosen installation
directory, type:

make upgrade

This will install new binaries, config files and libraries without
overwriting your RT database.

Update etc/RT_SiteConfig.pm in your RT installation directory.
You'll need to add any new values you need to change from the defaults
in etc/RT_Config.pm

You may also need to update RT's database. To find out, type:

ls etc/upgrade

For each item in that directory whose name is greater than
your previously installed RT version, run:

/opt/rt3/sbin/rt-setup-database --action schema \
--datadir etc/upgrade/<version>
/opt/rt3/sbin/rt-setup-database --action acl \
--datadir etc/upgrade/<version>
/opt/rt3/sbin/rt-setup-database --action insert \
--datadir etc/upgrade/<version>

Clear mason cache dir:

rm -fr /opt/rt3/var/mason_data/obj

Stop and start web-server.

8 If you're upgrading from RT 2.0:

Please upgrade from RT 2.0 to RT 3.2 and then follow the instructions
for section 7.

9 Configure the email and web gateways, as described below.

NOTE: root's password for the web interface is "password"
(without the quotes). Not changing this is a SECURITY risk!

10 Set up users, groups, queues, scrips and access control.

Until you do this, RT will not be able to send or receive email,
nor will it be more than marginally functional. This is not an
optional step.

SETTING UP THE WEB INTERFACE
----------------------------

RT's web interface is based around HTML::Mason, which works well with
the mod_perl perl interpreter within Apache httpd and FastCGI

mod_perl
--------

To install RT with mod_perl, you'll need to install the
apache database connection cache. To make sure it's installed, run
the following command:

perl -MCPAN -e'install Apache::DBI'

Next, add a few lines to your Apache configuration file, so that
it knows where to find RT:

<VirtualHost your.ip.address>
ServerName your.rt.server.hostname
DocumentRoot /opt/rt3/share/html
AddDefaultCharset UTF-8

PerlModule Apache::DBI
PerlRequire /opt/rt3/bin/webmux.pl

<Location />
SetHandler perl-script
PerlHandler RT::Mason
</Location>
</VirtualHost>

FastCGI
-------

Installation with FastCGI is a little bit more complex and is documented
in detail at http://wiki.bestpractical.com/index.cgi?FastCGIConfiguration

In the most basic configuration, you can set up your webserver to run
as a user who is a member of the "rt" unix group so that the FastCGI script
can read RT's configuration file. It's important to understand the security
implications of this configuration, which are discussed in the document
mentioned above.

To install RT with FastCGI, you'll need to add a few lines to your
Apache configuration file telling it about RT:

# Tell FastCGI to put its temporary files somewhere sane.
FastCgiIpcDir /tmp

FastCgiServer /opt/rt3/bin/mason_handler.fcgi -idle-timeout 120

# Pass through requests to display images
Alias /NoAuth/images/ /opt/rt3/share/html/NoAuth/images/

AddHandler fastcgi-script fcgi
ScriptAlias / /opt/rt3/bin/mason_handler.fcgi/

</VirtualHost>

SETTING UP THE MAIL GATEWAY
---------------------------

To let email flow to your RT server, you need to add a few lines of
configuration to your mail server's "aliases" file. These lines "pipe"
incoming email messages from your mail server to RT.

Add the following lines to /etc/aliases (or your local equivalent) on your mail server:

rt: "|/opt/rt3/bin/rt-mailgate --queue general --action correspond --url http://rt.example.com/"
rt-comment: "|/opt/rt3/bin/rt-mailgate --queue general --action comment --url http://rt.example.com/"

You'll need to add similar lines for each queue you want to be able
to send email to. To find out more about how to configure RT's email
gateway, type:

perldoc /opt/rt3/bin/rt-mailgate

GETTING HELP
------------

If RT is mission-critical for you or if you use it heavily, we recommend that
you purchase a commercial support contract. Details on support contracts
are available at http://www.bestpractical.com or by writing to
<sales@bestpractical.com>.

If you're interested in having RT extended or customized or would like more
information about commercial support options, please send email to
<sales@bestpractical.com> to discuss rates and availability.

RT WEBSITE
----------

For current information about RT, check out the RT website at
http://www.bestpractical.com/

You'll find screenshots, a pointer to the current version of RT, contributed
patches, and lots of other great stuff.

RT-USERS MAILING LIST
--------------------

To keep up to date on the latest RT tips, techniques and extensions,
you probably want to join the rt-users mailing list. Send a message to:

rt-users-request@lists.bestpractical.com

with the body of the message consisting of only the word:

If you're interested in hacking on RT, you'll want to subscribe to
<rt-devel@lists.bestpractical.com>. Subscribe to it with instructions
similar to those above.

Address questions about the stable release to the rt-users list, and
questions about the development version to the rt-devel list. If you feel
your questions are best not asked publicly, send them personally to
<jesse@bestpractical.com>.

BUGS
----

RT's a pretty complex application, and as you get up to speed, you might
run into some trouble. Generally, it's best to ask about things you
run into on the rt-users mailinglist (or pick up a commercial support
contract from Best Practical). But, sometimes people do run into bugs. In
the exceedingly unlikely event that you hit a bug in RT, please report
it! We'd love to hear about problems you have with RT, so we can fix them.
To report a bug, send email to rt-bugs@fsck.com.

# BEGIN BPS TAGGED BLOCK {{{
#
# COPYRIGHT:
#
# This software is Copyright (c) 1996-2008 Best Practical Solutions, LLC
# <jesse@bestpractical.com>
#
# (Except where explicitly superseded by other copyright notices)
#
#
# LICENSE:
#
# This work is made available to you under the terms of Version 2 of
# the GNU General Public License. A copy of that license should have
# been provided with this software, but in any event can be snarfed
# from www.gnu.org.
#
# This work is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301 or visit their web page on the internet at
# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
#
#
# CONTRIBUTION SUBMISSION POLICY:
#
# (The following paragraph is not intended to limit the rights granted
# to you to modify and distribute this software under the terms of
# the GNU General Public License and is only of importance to you if
# you choose to contribute your changes and enhancements to the
# community by submitting them to Best Practical Solutions, LLC.)
#
# By intentionally submitting any modifications, corrections or
# derivatives to this work, or any other work intended for use with
# Request Tracker, to Best Practical Solutions, LLC, you confirm that
# you are the copyright holder for those contributions and you grant
# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
# royalty-free, perpetual, license to use, copy, create derivative
# works based on those contributions, and sublicense and distribute
# those contributions and any derivatives thereof.
#
# END BPS TAGGED BLOCK }}}