@Section
   @Title { Figures and tables }
   @Tag { figures }
@Begin
@PP
Figures are created in a similar way to footnotes:
figures. @Index { figures }
@ID @OneRow @Code {
"@Figure"
"    @Caption { Basser Lout }"
"@Diag vstrut { yes } treehsep { 1c } {"
"    @HTree { @Box Lout @FirstSub arrow { yes } @Box PostScript }"
"}"
}
The @Code "@Figure" symbol places the following object (which in this example is
figure. @Index @Code "@Figure"
created using the advanced graphics features of Chapter {@NumberOf diagrams})
at the top of the following column or page,
@Figure
    @Tag { figex }
    @Caption { Basser Lout }
@Diag vstrut { yes } treehsep { 1c } {
    @HTree { @Box Lout @FirstSub arrow { yes } @Box PostScript }
}
labelled by the @Code "@Caption" option and automatically numbered.  You
captions. @RawIndex { captions }
captions.figures @SubIndex { in @Code "@Figure" and @Code "@Table" }
can see this example at the top of page {@PageOf figex}.  Tables are
table. @Index @Code "@Table"
obtained in the same way using {@Code "@Table"} instead of {@Code "@Figure"}.
@PP
@Code "@Figure" and @Code "@Table" each have an @Code "@InitialLanguage"
option which determines the language of the figure or table.  If this is
omitted, the language of the document as a whole will be used, not the
language where the figure or table occurs.
@PP
The two symbols also have a @Code "@CaptionPos" option, which determines
whether the caption appears above or below the figure or table.  The
default is {@Code "Below"}, the alternative is {@Code "Above"}.
@PP
The question of what is a suitable running header to print on pages
containing figures and tables (possibly from different sections) is a
rather awkward one.  On any page with a figure or table at the top, Lout
uses whatever running header was appropriate for the text on the previous
page.  In practice it seems to work quite well.
@PP
If your document contains many figures, large figures, or multi-page
figures, you are likely to encounter cases where Lout's assignment of
figures to pages is not pleasing.  In that case, you can improve things
by moving the figures around within the body text, and by using the
@Code "@Location" option of the @Code "@Figure" symbol, which determines
location. @Index @Code "@Location"
where the figure will appear.  Its possible values are
@DP @Tab
    @Fmta { @Col @Code A ! @Col B }
{
@FirstRowa
    A { PageTop }
    B { The figure will appear at the top of the following page, occupying
the full page width; or, if there is insufficient space there (owing to other
figures already present), at the top of the first subsequent page with
sufficient space. }
@Rowa
    A { EvenPageTop }
    B { Like @Code PageTop except that the first page of the figure
or table will be an even-numbered (left-hand or verso) page -- useful
for double-page spreads.  }
@Rowa
    A { FullPage }
    B { Like {@Code PageTop} except that nothing else will appear on the
same page as the figure except the usual running headers and footers, and
possibly other @Code FullPage figures and tables.
@FootNote { This location replaces the @Code "@FullPage" option of
earlier versions of Lout, which has been withdrawn. }
}
@Rowa
    A { EvenFullPage }
    B { Like {@Code FullPage} except that the first page of the figure
or table will be an even-numbered (left-hand or verso) page, like
{@Code EvenPageTop}.
}
@Rowa
    A { PageFoot }
    B { The figure will appear at the foot of the current page, occupying
the full page width; or, if there is insufficient space there, at the top
of the following page and so on as for {@Code PageTop}. }
@Rowa
    A { ColTop }
    B { The figure will appear at the top of the following column,
occupying the column width; or, if there is insufficient space there,
at the top of the first subsequent column with sufficient space.  This
is different from @Code PageTop only in multi-column documents. }
@Rowa
    A { ColFoot }
    B { The figure will appear at the foot of the current column,
occupying the column width; or, if there is insufficient space there, at
the top of the following column as for {@Code ColTop}.  This differs
from @Code PageFoot only in multi-column documents. }
@Rowa
    A { ColEnd }
    B { The figure will appear in a column at the end of the document
(or chapter, appendix etc. in the case of books).  There is no
@Code PageEnd value corresponding to {@Code ColEnd}. }
@Rowa
    A { AfterLine }
    B { The figure will appear as a column-width display immediately after
the line in the final printed document in which it occurs. }
@Rowa
    A { TryAfterLine }
    B { The same as @Code {AfterLine} unless there is insufficient space
in the current column to hold the displayed figure, in which case it
switches to @Code {ColTop} instead. }
@Rowa
    A { Display }
    B { The figure will appear as a display at the point it occurs.  There
is no @Code TryDisplay value corresponding to {@Code Display}. }
@Rowa
    A { Raw }
    B { The figure will appear as an object, with no extra spacing, at
the point it occurs.  This is useful, for example, for getting two figures
side by side in one display:  use a displayed table containing two raw
figures. }
}
@DP
The @Code "@Table" symbol also has this option.  The default location is
{@Code "PageTop"}, but this can be changed by changing the
figurelocation. @Index @Code "@FigureLocation"
tablelocation. @Index @Code "@TableLocation"
@Code "@FigureLocation" and @Code "@TableLocation" setup file options.
@PP
The numbers assigned to figures and tables, and their ordering in any list
of figures or tables, is based on where they appear in the final printed
document, not on where they appear in the source files.  This is better for
the reader in the unusual case of a fixed figure being overtaken by a
floating one.  If a section number is printed as part of a figure number,
and the figure floats forward from one section into another, the figure
number will reflect the later section, not the earlier one as it should.
You can fix this problem by moving the figure to an earlier point in
the section, or by not having section numbers in figures (see below).
@PP
@Code "@Figure" and @Code "@Table" each have a @Code "@OnePage" option,
whose value may be @Code "Yes" or {@Code No}.  Setting @Code "@OnePage"
to @Code Yes causes the figure or table and its caption to be kept
together on one page or column (enclosing the body of the figure or table
in @Code "@OneRow" would have the same effect except that it would not
incorporate the caption, hence the need for this option).  You need to be
certain that the whole assembly will fit on one page when setting
@Code "@OnePage" to {@Code "Yes"}.  If it doesn't, Lout should warn you
with a message such as
@ID @Code "25.3c object too high for 23.4c space; will try elsewhere"
giving the size of the oversize object and the size of the space it
failed to fit into; but (unfortunately) it does not given a clear
indication of whether trying elsewhere succeeded or not.  When you
see this message you need to check for yourself whether the figure was
actually printed or not; it may mean merely that the figure was put
back to a later page than the first possible one.
@PP
The @I default value of the @Code "@OnePage" option for each figure or
table depends on the value of its @Code "@Location" option as follows:
@ID @Tab
    @Fmta { @Col @Code A ! @Col ! @Col @Code B }
{
@Rowa
    A { No }
    B { PageTop  ColTop  ColEnd  Raw }
@Rowa
    A { Yes }
    B { PageFoot  ColFoot  Display  AfterLine  TryAfterLine }
}
These choices represent a guess that figures that the user is happy to
see at the page foot or in a display are probably going to be small enough
to keep on one page, but that other figures may not be.  In any case, these
are only default values and you may set @Code "@OnePage" as you wish.
@PP
By default, the body of the figure will be centred, and this usually looks
best, at least for small figures.  @Code "@Figure" and @Code "@Table" each
have a @Code "@Format" option which controls this format:
@ID @Code {
"@Figure"
"    @Format { @CurveBox @HExpand @CC @Body }"
}
Within the @Code "@Format" option, the @Code "@Body" symbol stands for the
body of the figure or table; it must appear exactly once.  Display symbols
such as @Code "@CentredDisplay" may not be applied to the {@Code "@Body"}
symbol; instead, there are {@Code "@II"}, {@Code "@QQ"}, {@Code "@CC"}, and
{@Code "@RR"}, which indent, quote, centre, or right-justify the following
object.  The example just given centres the figure inside a @Code "@CurveBox"
which is horizontally expanded (by the @Code "@HExpand" symbol, which is not
specific to figures) to occupy the full width of the page or column, rather
than fitting snugly around the figure.
@PP
Although @Code "@CC" will always centre the figure or table, occasionally
it underestimates the amount of space available to centre in, and hence
the figure or table appears only partly centred, or even left
justified.  This occurs when nothing on the page extends the full
width of the page.  If this problem occurs, use
@ID @Code "@Format { @HExpand @CC @Body }"
The @Code "@HExpand" symbol expands the space available to the following
object to the maximum possible amount, so that the centring is with respect
to the full available width as desired.
@PP
The @Code "@Format" option applies to just the body of the figure, not to
its caption.  It applies to each page or column of a multi-page or
multi-column figure; for example, the above format will draw a box around
each page of a multi-page figure, and each page will be separately centred.
@Code "ColEnd" and @Code "Raw" figures are exceptions to this rule:  they
always apply the format to the figure as a whole.  This means that you cannot
box multi-page figures of these two types, since the result would be an
unbreakable object too large to fit on one page.
@PP
There are setup file options for controlling the appearance of figures and
tables.  Only those for figures will be given here, since the ones for tables
are identical except that @Code Table replaces @Code Figure in their
names.  Here they all are:
@FootNote { These are as of Version 3.15 and above.  Prior to that
there were {@Code "@CaptionFont"}, {@Code "@CaptionBreak"}, and
{@Code "@CaptionFormat"} options, and {@Code "@CaptionFormat"}
took values that did not include the @Code "caption" symbol. }
@ID @OneCol @Code {
"@FigureLocation { PageTop }"
"@FigureFormat { @CC @Body }"
"@FigureWord { figure }"
"@FigureNumbers { Arabic }"
"@FigureCaptionPos { Below }"
"@FigureCaptionFont { }"
"@FigureCaptionBreak { }"
"@FigureCaptionFormat { @B { word @NumSep number. &2s } @Insert caption }"
"@MakeFigureContents { No }"
"@FigureListWord { figurelist }"
}
@Code "@FigureLocation" is the default value of the @Code "@Location"
option of figures.  Changing it, for example to
{@Code "FullPage"}, changes the location of all figures at
once.  You may still override this location for any individual figure,
however, by giving that figure a @Code "@Location" option.  In a similar way,
figureformat. @Index @Code "@FigureFormat"
tableformat. @Index @Code "@TableFormat"
@Code "@FigureFormat" is the default value of the @Code "@Format"
option (this shows why figures are centred by default) and
figurecaptionpos. @Index @Code "@FigureCaptionPos"
tablecaptionpos. @Index @Code "@TableCaptionPos"
@Code "@FigureCaptionPos" is the default value of {@Code "@CaptionPos"}.
@PP
@Code "@FigureWord" determines the word that is part of the figure
number.  The default value, {@Code figure}, produces `Figure' or its
equivalent in the current language; any other value produces itself.
@PP
@Code "@FigureNumbers"
figurenumbers. @Index @Code "@FigureNumbers"
tablenumbers. @Index @Code "@TableNumbers"
determines whether figures are
numbered automatically or not; the choices are
{@Code "None"}, {@Code "Arabic"}, {@Code "Roman"}, {@Code "UCRoman"},
{@Code "Alpha"}, and {@Code "UCAlpha"}.  Depending on the document
type and where the figure or table occurs, the number might include
a chapter number as well.  This is determined by options in the
setup file for your document type; for example, 
@ID @Code "@SectionNumInFigures { No }"
appears in the @Code "report" setup file, and means that a section
number will not appear in the figure number (unless you change the
option to {@Code Yes}).
@PP
@Code "@FigureCaptionFont" and @Code "@FigureCaptionBreak" determine the
font and paragraph breaking style used in the captions of figures.  Their
default values are empty, meaning to use the initial font and break styles;
but, for example, you could have
@ID @Code "@FigureCaptionFont { -2p }"
in your setup file to get a smaller font size in your captions.
@PP
The @Code "@FigureCaptionFormat" option determines the format of the
caption.  Within it, the symbol @Code word stands for the `Figure'
word as defined by {@Code "@FigureWord"}; the @Code number
symbol stands for the number of the figure; and @Code caption stands
for the body of the caption.  The default value shown above prints
the word and number and a period in bold, inserted together with a
gap of two spaces into the first paragraph of the caption.  If you
don't use the @Code "@Insert" symbol you'll run into problems with
multi-paragraph captions.
@PP
You can get a list of figures at the start of your document by setting
the @Code "@MakeFigureContents" setup file option to {@Code Yes}.  The
format of these lists will follow the format of tables of contents.  These
lists are only available in books (Section {@NumberOf books}).  The
title printed above the list of figures is determined by the
@Code "@FigureListWord" option; the default value, {@Code "figurelist"},
produces `List of Figures' or its equivalent in the current language; any
other value produces itself.
@End @Section