% This file was created automatically from sigs.msk.
% DO NOT EDIT!
\Chapter{Invariants for Difference Sets}

This chapter contains an important tool for the generation of
difference sets. It is called the ``coset signature'' and is an
invariant for equivalence of partial relative difference sets.  For
large $\lambda$, there is an invariant calculated by
"MultiplicityInvariantLargeLambda". This invariant can be used
complementary to the coset signature and is explained in section
"RDS:An invariant for large lambda".

Most of the methods explained here are not commonly used. If you do
not want to know how coset signatures work in detail, you can safely
skip a large part of this and go straight to the explanation of
"SignatureDataForNormalSubgroups" and "ReducedStartsets".

The functions "RDSFactorGroupData", "MatchingFGData" will be
interesting for you, if you look for difference sets with the same
parameters in different gorups. "SignatureDataForNormalSubgroups" and
"SigInvariant"

The last section ("RDS:Blackbox functions") of this chapter has some
functions which allow the user to use coset signatures with even less
effort. But be aware that these functions make choices for you that
you probably do not want if you do very involved calculations. In
particular, the coset signatures are not stored globally and hence
cannot be reused. For a demonstration of these easy-to-use functions,
see chapter "RDS:A basic example"

%%%%%%%%%%%%%%%%%%%%
\Section{The Coset Signature}

Let $R \subseteq G$ be a (partial) relative difference set (for
definition see "Introduction") with forbidden set $N\subseteq G$. Let
$U\leq G$ be a normal subgroup and $C=\{g_1,\dots, g_{|G:U|}\}$ be a
system of representatives of $G/U$.

The intersection number of $R$ with $Ug_i$ is defined as $v_i=|R\cap
Ug_i|$. For every normal subgroup $U\leq G$ the multiset $\{|R\cap
Ug_i| \colon g_i\in C\}$ is called ``coset signature of $R$ (relative
to $U$)''.

Let $D\subseteq G$ be a relative difference set and
$\{v_1,\dots,v_{|G:U|}\}$ its coset signature. Then the following
equations hold (see \cite{Bruck55},\cite{RoederDiss}):

$$
\matrix{
\sum v_i=k\cr
\sum v_i^2=\lambda(|U|-|U\cap N|)+k\cr
\sum_j v_j v_{ij}=
	 \lambda(|U|-|g_iU \cap N|)&{\rm for }\   g_i\not\in U}
$$
where $v_{ij}=|D\cap g_ig_jU|$.  If the forbidden set $N$ is a
subgroup of $G$ we have $|g_iU\cap N|$ is either $0$ or equal to
$|U\cap N|$.

Given a group $G$, the forbidden set $N\subseteq G$ and some normal
subgroup $U\leq G$, the right sides of this equations are known. So we
may ask for tuples $(v_1,\dots,v_{|G:U|})$ solving this system of
equations. Of course, we index the $v_i$ with the elements of $G/U$,
so the last equation poses conditions to the ordering of the tuple
$(v_1,\dots,v_{|G:U|})$.

So we call any multiset $\{v_1,\dots,v_{|G:U|}\}$ solving the above
equations an ``admissible signature'' for $U$.

%In \GAP, admissible signatures are represented by lists as returned by
%`Collected'

\>CosetSignatureOfSet( <set>, <cosets> ) F

`CosetSignatureOfSet( <set>,<cosets>)' returns the *ordered list* of 
intersection numbers of <set>. That is, the size of the intersection
of <set> with each Element of <cosets>.

Note that it is not tested, if <cosets> is really a list of cosets.
`CosetSignatureOfSet( <set>,<cosets>)' works for any List <set> and any 
list of lists <cosets>. So be careful!


\beginexample
gap> G:=SymmetricGroup(5);;
gap> A:=AlternatingGroup(5);;
gap> CosetSignatureOfSet([(1,2),(1,5),(1,2,3)],RightCosets(G,A));
[ 1, 2 ]
gap> CosetSignatureOfSet([(1,2),(1,5),(1,2,3)],[A]);              
[ 1 ]
gap> CosetSignatureOfSet([(1,2),(1,5),(1,2,3)],[[(1,2),(1,2,3)],[(3,2,1)]]);
[ 0, 2 ]
\endexample


\>CosetSignatures( <Gsize>, <Usize>, <diffsetorder> ) O
\>CosetSignatures( <Gsize>, <Nsize>, <Usize>, <Intersectsizes>, <k>, <lambda> ) O

`CosetSignatures( <Gsize>,<Usize>,<diffsetorder>)' returns all 
$<Gsize>/<Usize>$ tuples such that the sum of the squares of each tuple 
equals  <Usize>+<diffsetorder>. And the sum of each tuple equals 
<diffsetorder>+1.

These are necessary conditions for signatures of difference sets and 
normal subgroups of order <Usize> in groups of order <Gsize> (see "The 
Coset Signature").

`CosetSignatures( <Gsize>,<Nsize>,<Usize>,<Intersectsizes>,<k>,<lambda>)'
Calculates all multiset meeting some  conditions for signatures of relative 
difference sets and normal subgroups of order <Usize> in groups of 
order <Gsize> (see "The Coset Signature").
Here <Nsize> is the size of the forbidden group,
<Intersectsizes> is a list of integers determining the size of the 
intersection of the forbidden set and the normal Subgroup of order <Usize>.
The pararmeters <k> and <lambda> are the usual ones for designs.
`CosetSignatures' returns a list containing one pair for each entry <i> of 
<Intersectsizes>. The first entry of this pair is 
$[<Gsize>,<Nsize>,<Usize>,<i>,<k>,<lambda>]$ and the second one is a list
of admissible signatures with these parameters.


\beginexample
gap> CosetSignatures(256,16,64,[1,4,8,16],17,1);  
[ [ [ 256, 16, 64, 1, 17, 1 ], [  ] ], 
  [ [ 256, 16, 64, 4, 17, 1 ], [ [ 3, 4, 4, 6 ] ] ], 
  [ [ 256, 16, 64, 8, 17, 1 ], [ [ 4, 4, 4, 5 ] ] ], 
  [ [ 256, 16, 64, 16, 17, 1 ], [  ] ] ]
#And for an ordinary difference set of order 16.
gap> CosetSignatures(273,1,39,[1],17,1);  
[ [ [ 273, 1, 39, 1, 17, 1 ], 
  [ [ 0, 1, 2, 3, 3, 4, 4 ], [ 0, 2, 2, 2, 3, 3, 5 ], 
    [ 1, 1, 1, 2, 4, 4, 4 ], [ 1, 1, 1, 3, 3, 3, 5 ], 
    [ 1, 1, 2, 2, 2, 4, 5 ] ] ] ]
\endexample

\>TestSignatureLargeIndex( <sig>, <group>, <Normalsg>[, <factorgrp>] ) O

*this does only work for ordinary difference sets, not for 
relative difference sets in general*

`TestSignatureLargeIndex(<sig>,<group>,<Normalsg>[,<factorgrp>])' tests 
if <sig> meets some necessary conditions of "The Coset Signature" to be 
a signature for a difference set in  <group> for the normal subgroup 
<Normalsg>. <factorgrp> is the factorgroup <group>/<Normalsg>.
The returned value is <true> or <false> resp.



\>TestSignatureCyclicFactorGroup( <sig>, <Nsize> ) O

*This does only work for ordinary difference sets, not for relative 
difference sets in general*

`TestSignatureCyclicFactorGroup(<sig>,<Nsize>)' test if <sig> meets 
meets some necessary conditions of "The Coset Signature" to be a signature 
for a difference set in some group, which has a normal subgroup of 
size <Nsize> such that  the factor group is cyclic.
The returned value is <true> or <false> resp.



\>TestedSignatures( <sigs>, <group>, <Normalsg>[, <maxtest>][, <moretest>] ) O

*this does only work for ordinary difference sets, not for 
relative difference sets in general*

Let <sigs> be a list of possible signatures as returned by 
"CosetSignatures". Let <Normalsg> be a subgroup of <group>. 
For each signature in <sigs>, the necessary conditions described in 
"The Coset Signature" are tested to decide
if the signature can be a signature of a  difference set in <group> for
for the normal subgroup <Normalsg>. 

As this involves computation for all permutations of the signature, this
can be very costly. The argument <maxtest> determines how many 
permutations are admissible. If <maxtest>=0, all signatures are tested,
regardless of how much work is necessary for this. If a signature has 
too many permutations, it is returned without test. Even though it is 
not wise, `<maxtest>=0' is the default option. 
If `InfoLevel(InfoRDS)'\index{InfoRDS@{\tt InfoRDS}} is at least $2$, 
information about skipped signatures is echoed.

If the boolean value <moretest> is <false> and all signatures in <sigs> but 
the last one are found to be not admissible, the last one is returned
without test. This saves the time to test the last signature, but if 
chances are that there is no difference set in <group>, this may also 
give away a chance to find out early (every difference set has 
signatures, so no admissible signature means that no difference set can
exist). Default is <true>.


`TestedSignatures' calls "TestSignatureCyclicFactorGroup" or
"TestSignatureLargeIndex" and returns a sublist of <sigs>. 



\beginexample
gap> G:=SmallGroup(273,2);;
gap> N:=First(NormalSubgroups(G),g->Order(g)=39);
Group([ f1, f3 ])
gap> sigs:=CosetSignatures(273,1,39,[1],17,1);  
[ [ [ 273, 1, 39, 1, 17, 1 ], 
  [ [ 0, 1, 2, 3, 3, 4, 4 ], [ 0, 2, 2, 2, 3, 3, 5 ], 
    [ 1, 1, 1, 2, 4, 4, 4 ], [ 1, 1, 1, 3, 3, 3, 5 ], 
    [ 1, 1, 2, 2, 2, 4, 5 ] ] ] ]
gap> TestedSignatures(sigs[1][2],G,N);                              
[ [ 1, 1, 1, 2, 4, 4, 4 ], [ 1, 1, 1, 3, 3, 3, 5 ] ]
\endexample

\>TestedSignaturesRelative( <sigs>, <fgdata>, [, <maxtest>][, <moretest>] ) O

`TestedSignaturesRelative' takes a list <sigs> of lists of integers and 
returns a those which may be signatures of relative difference sets with 
forbidden set.

<fgdata> is a record as returned by 
`RDSFactorGroupData(<U>,<N>,<lambda>,<Gdata>)'
If <maxtest> is set, a signature $s$ is only tested if 
`NrPermutationsList(s)'
is less than <maxtest> if <maxtest> is set to 0, all signatures are tested 
this is the default.
If <moretest> is tue, a signature is tested even if it is the only one left.
This means we do not assume that there must be an admissable signature at all.
The default for <moretest> is <true>.



\>SigInvariant( < diffset >, <data> ) O

Given a partial relative difference set <diffset> and a list of 
records with entries <cosets> and <sigs>.
Here <cosets> is a full list of cosets and <sigs> is a list of 
signatures that may occur for relative difference sets.

For each record <rec> in <data>, the intersection numbers of 
<diffset> with  the cosets of <rec.cosets> are computed stored in 
a set <sig>. If none of the signatures in <rec.sigs> is pointwise
greater or equal <sig>, `SigInvariant( <diffset>,<data>) returns `fail'.
Otherwise <sig> is added to a list of signatures that is returned.

Note the returned invariant is that of $diffset\cup \{1\}$. 
The output from `SignatureDataForNormalSubgroups' can be used as <data>.



\beginexample
gap> G:=SmallGroup(273,2);                    
<pc group of size 273 with 3 generators>
gap> Gdata:=PermutationRepForDiffsetCalculations(G);;
gap> N:=First(NormalSubgroups(G),g->Order(g)=39);
Group([ f1, f3 ])
gap> sigs:=CosetSignatures(273,1,39,[1],17,1);  
[ [ [ 273, 1, 39, 1, 17, 1 ], 
  [ [ 0, 1, 2, 3, 3, 4, 4 ], [ 0, 2, 2, 2, 3, 3, 5 ], 
    [ 1, 1, 1, 2, 4, 4, 4 ], [ 1, 1, 1, 3, 3, 3, 5 ], 
    [ 1, 1, 2, 2, 2, 4, 5 ] ] ] ]
gap> TestedSignatures(sigs[1][2],G,N);                              
[ [ 1, 1, 1, 2, 4, 4, 4 ], [ 1, 1, 1, 3, 3, 3, 5 ] ]
gap> sigs:=TestedSignatures(sigs[1][2],G,N);
[ [ 1, 1, 1, 2, 4, 4, 4 ], [ 1, 1, 1, 3, 3, 3, 5 ] ]
gap>   ## calculate cosets in permutation notation:
gap> rc:=List(RightCosets(G,N),i->GroupList2PermList(Set(i),Gdata));;
gap> data:=[rec(cosets:=rc,sigs:=sigs)];;
gap> SigInvariant([3,4,5],data);
[ [ [ 0, 0, 0, 0, 0, 1, 3 ], 1 ] ]
\endexample

For an example using "SignatureDataForNormalSubgroups" see the example
after "RDS:ReducedStartsets" below.

\>SignatureDataForNormalSubgroups( <Normals>, <globalSigData>, <forbiddenSet>, <Gdata>, <parameters> ) O

Let <Gdata> be a record as returned by "PermutationRepForDiffsetCalculations".
Let <Normals> be a list of normal subgroups of <Gdata.G>, and <forbiddenSet> the forbidden set 
(as set of group elements or group).

<parameters> must be a list of length 4 of the form <[k,lambda,maxtest,moretest]>
with <k> the length of the relative difference set to be constructed and <lambda> the parameter 
as always. <maxtest> and <moretest> are passed to `TestedSignaturesRelative' and must be set. 

`SignatureDataForNormalSubgroups' returns a list containing one record for each group $U$ in
<Normals>. This record contains: 
\beginlist
 \item{1.} the subgroup <U> named <.subgroup>
 \item{2.} the signatures <.sigs> for <U>
 \item{3.} the cosets <.cosets> modulo <U> as lists of integers 
\endlist

Moreover, the list <globalSigData> is used to store global information which can be
reused with other groups. The $i^{th}$ entry of <globalSigData> is a list of records 
that contains all known information about subgroups of order $i$.
Each of these records has the following components:
\beginlist
 \item{1.} <.cspara> the parameters for "CosetSignatures"
 \item{2.} <.sigs> the output of "CosetSignatures" when the input is <.cspara>
 \item{3.} <.fgsigs> a list of records containing data about factor groups with parameters <.cspara>:
 \beginlist
  \item{3.1.} <.fg> the factor group
  \item{3.2.} <.fgaut> the automorphism group of <.fg>
  \item{3.3.} <.Nfg> the image of the forbidden set $N$ under the natural epimorphism to <.fg>
  \item{3.4.} <.fgintersect> the pairs $[g,|g\cap N| ]$ for all $g$ in <.fg>. Here $N$ is the forbidden set.
  \item{3.5.} <.sigs> the known admissible signatures (this is a subset of the set in number 2. 
             of course)
\endlist
\endlist

The list <globalSigData> can be used if different groups are studied. If a group has a normal 
subgroup with parameters (in the sense of <.cspara>) listed in <globalSigData>, the signatures
from a previous calculation may be used. Of course, the factor groups have to be checked first.
This check is done with "MatchingFGData" or "MatchingFGDataNonGrp". 

So the second run of `SignatureDataForNormalSubgroups' with the same parameters and different 
<Gdata> and <Normals> will normally be much faster, as the signatures are already stored in 
<globalSigData>. Note that <maxtest> and <moretest> are not stored. So a second run with 
larger <maxtest> will not result in a recalculation of signatures.




\beginexample
gap> G:=CyclicGroup(57);
<pc group of size 57 with 2 generators>
gap> Gdata:=PermutationRepForDiffsetCalculations(G);;
gap> SignatureDataForNormalSubgroups(NormalSubgroups(Gdata.G),sigdata,
> [One(Gdata.G)],Gdata,[8,1,10^6,true]);   # for ordinary diffset of order 7.
[ rec( subgroup := Group([ f1*f2^6 ]), 
      sigs := [ [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 2 ] ], 
      cosets := [ [ 1, 20, 40 ], [ 3, 23, 43 ], [ 6, 26, 46 ], [ 9, 29, 49 ], 
      	     	  [ 12, 32, 52 ], [ 15, 35, 55 ], [ 18, 38, 57 ], 
		  [ 4, 21, 41 ], [ 7, 24, 44 ], [ 10, 27, 47 ], 
          	  [ 13, 30, 50 ], [ 16, 33, 53 ], [ 19, 36, 56 ], 
		  [ 2, 22, 39 ], [ 5, 25, 42 ], [ 8, 28, 45 ], [ 11, 31, 48 ], 
		  [ 14, 34, 51 ], [ 17, 37, 54 ] ] ), 
  rec( subgroup := Group([ f2 ]), sigs := [ [ 1, 3, 4 ] ], 
      cosets := [ [ 1, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42, 
      	     	  45, 48, 51, 54 ], 
          [ 2, 5, 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 38, 41, 44, 47, 50,
	    53, 56 ], 
          [ 4, 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 37, 40, 43, 46, 49,
	     52, 55, 57 ] ] ) ]
gap> Filtered([1..Size(sigdata)],i->IsBound(sigdata[i]));
[ 3, 19 ]
gap> Size(sigdata[3]);
2
gap> sigdata[3][1].cspara;sigdata[3][2].cspara;
[ 57, 1, 3, 1, 7, 1 ]
[ 57, 1, 3, 1, 8, 1 ]
\endexample

The following three functions are used by
"SignatureDataForNormalSubgroups". If you do not want to write your
own function for signature management, you might not need them.

\>RDSFactorGroupData( <U>, <N>, <lambda>, <Gdata> ) O

takes the subgroup <U> of <G>, the forbidden set <N> as a subgroup or 
subset of <G> and the record of data <Gdata> as returned by 
`PermutationRepForDiffsetCalculations(<G>)' and returns a record containing
\beginlist
 \item{.fg} the factor group modulo <U>
 \item{.fglist} the factor group as a strictly ordered list
 \item{.cosets} the cosets modulo <U> as lists of integers
 \item{.lambda} the parameter <lambda> as passed to the function
 \item{.Usize} the size of <U>    
 \item{.fgaut} the automorphism group of <.fg>
 \item{.Nfg} the image of <N> in <.fg>
 \item{.fgintersect} a list of pairs such that the $i^{th}$ entry is the 
  pair consisting of <.fg[i]> and the size of the intersection of <.fg> with 
 <.Nfg> as cosets modulo <U>.
 \item{.intersectshort} ist just the second component of <.fgintersect>.
\endlist



\>MatchingFGDataNonGrp( <fgdatalist>, <fgmatchdata> ) O

Let <fgdatalist> be a list of records and <fgmatchdata> a record with components
<.fg>, <.Nfg> and <.fgintersect>  as returned by "RDSFactorGroupData".
Then `MatchingFGDataNonGrp' returns the entry of <fgdatalist> that defines
the same admissible signatures as <fgmatchdata>. If no such entry exists,
`fail' is returned.

The forbidden set $N$ is not assumed to be a group.



\>MatchingFGData( <fgdatalist>, <fgmatchdata> ) O

Let <fgdatalist> be a list of records and <fgmatchdata> a record with components
<.fg>, <.Nfg>, <.fgintersect> and <.fgaut> as returned by "RDSFactorGroupData".
Then `MatchingFGDataNonGrp' returns the entry of <fgdatalist> that defines
the same admissible signatures as <fgmatchdata>. If no such entry exists,
`fail' is returned.

Here the forbidden set $N$ has to be a group.



\>ReducedStartsets( <startsets>, <autlist>, <csdata>, <Gdata> ) O
\>ReducedStartsets( <startsets>, <autlist>, <func>, <Gdata> ) O

Let  <startsets> be a set of partial relative difference sets, <autlist> a 
list of permutation groups and <Gdata> record returned by 
`PermutationRepForDiffsetCalculations'.
Then `ReducedStartsets' partitions the list <startsets> according to the 
values of the function <func> and performs a test for equivalence on the 
elements of the partition. The list returned is a sublist
of <startsets> of pairwise non-equivalent partial relative difference sets
if <func> is an invariant for partial relative difference sets. All elements 
for which <func> returns `fail' are discarded.

If a list <csdata> of records as used for "SigInvariant" (i.e. containing
<.cosets> and <.signatures>) is pased, then `ReducedStartsets'
uses "SigInvariant" for <func>.



\beginexample
gap> G:=CyclicGroup(57);
<pc group of size 57 with 2 generators>
gap> Gdata:=PermutationRepForDiffsetCalculations(G);;
gap> cosetsigs:=SignatureDataForNormalSubgroups(NormalSubgroups(Gdata.G),
> sigdata, [One(Gdata.G)],Gdata,[8,1,10^6,true]);;
gap> SigInvariant([3,4,5,9],cosetsigs);
[ [ [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1 ], 1 ], [ [ 1, 1, 3 ], 1 ] ]
gap> ssets:=AllDiffsets([],2,[],Gdata);; 
gap> Size(ssets);
1458
gap> Size(ReducedStartsets(ssets,[Group(())],cosetsigs,Gdata));
#I  Size 1458
#I  5/ 0 @ 0:00:00.126
486
gap> Size(ReducedStartsets(ssets,[Gdata.Ai],cosetsigs,Gdata)); 
#I  Size 1458
#I  5/ 0 @ 0:00:00.123
17
\endexample
\>`maxAutsizeForOrbitCalculation' V

In "ReducedStartsets", a bound is needed to decide if `Orbit' or 
`RepresentativeAction' should be used. If the group is larger than 
<maxAutsizeForOrbitCalculation>, `RepresentativeAction' is used.
The default value for `maxAutsizeForOrbitCalculation' is $5*10^6$.
If you want to change it, you will have to edit the file `sigs.gd'.





%%%%%%%%%%%%%%%%%%%%%%
\Section{An invariant for large lambda}

\>MultiplicityInvariantLargeLambda( <set>, <Gdata> ) O

Let <set> be a partial relative difference set with $\lambda>1$. 
Set `<P>:=AllPresentables(<set>,<Gdata>)' then the set of multiplicities
of <P> is an invariant for partial relative difference sets.

`MultiplicityInvariantLargeLambda' returns a list in a form as `Collected'
does.



\beginexample
gap> G:=CyclicGroup(7);;Gdata:=PermutationRepForDiffsetCalculations(G);;
gap> AllPresentables([2,3],Gdata);
[ 2, 3, 7, 2, 7, 6 ]
gap> MultiplicityInvariantLargeLambda([2,3],Gdata);
[ [ 1, 2 ], [ 2, 2 ] ]
\endexample
(Read this output as: two elements occur once and two occur twice).

This invariant can be used for "ReducedStartsets" complementary to the
signature invariant by defining
\begintt
gap> partfunc:=function(list)
> local sig;                                           
> if sig=fail
> then return fail;
> fi;
> return [MultiplicityInvariantLargeLambda(list,Gdata),SigInvariant(list,sigdata)];
> end;
function( list ) ... end
\endtt

<partfunc> can then be passed to "ReducedStartsets". Of course,
<sigdata> has to be the list of records defining the coset signatures.


%%%%%%%%%%%%%%%%%%%%%%
\Section{Blackbox functions}

Here are a few functions used in chapter "RDS:A basic example". These
are meant as black boxes for quick tests. Some of them make choices
for you which might not be suitable to the chase you consider, so for
serious studies, consider using the more complicated-looking functions
above (an example for this comprises chapter "RDS:An Example
Program").

\>SignatureData( <Gdata>, <forbiddenSet>, <k>, <lambda>, <maxtest> ) F

Let <Gdata> be a record as returned by "PermutationRepForDiffsetCalculations".
Let <forbiddenSet> the forbidden set (as set or group).

<k> is the length of the relative difference set to be constructed and 
<lambda> the usual parameter. <maxtest> is the
Then `SignatureData' calls "SignatureDataForNormalSubgroups" for  
normal subgroups of order at least `RootInt(Gdata.G)'. Here <maxtest> 
is an integer which determines how many permutations of a possible 
signature are checked to be a sorted signature. Choose a value of at
least $10^5$. Larger numbers here normaly result in better results 
when generating difference sets (making reduction more effective).

`SigntureData' chooses normal subgroups of <Gdata.G> and uses 
"SignatureDataForNormalSubgroups" to calculate signature data. The global
data generated by "SignatureDataForNormalSubgroups" is just discarded.


\beginexample
gap> G:=CyclicGroup(57);;Gdata:=PermutationRepForDiffsetCalculations(G);;
gap> sigdat:=SignatureData(Gdata,[One(Gdata.G)],8,1,10^5);
[ rec( subgroup := Group([ f2 ]), sigs := [ [ 1, 3, 4 ] ], 
      cosets := [ [ 1, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42, 45, 48, 51, 54 ], 
          [ 2, 5, 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 38, 41, 44, 47, 50, 53, 56 ], 
          [ 4, 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 37, 40, 43, 46, 49, 52, 55, 57 ] ] ) ]
\endexample
\>NormalSgsHavingAtMostNSigs( <sigdata>, <n>, <lengthlist> ) F

Let <sigdata> be a list as returned by "SignatureDataForNormalSubgroups", an
integer <n> and a list of integers <lengthlist>.
`NormalSgsHavingAtMostNSigs' filters <sigdata> and returns
a list of records with components .subgroup and .sigs
is returned, such that for every entry
.subgroup is a normal subgroup of index in <lengthlist> having at most <n>
signatures.


\>SuitableAutomorphismsForReduction( <Gdata>, <normalsg> ) F

Given a normal subgroup <normalsg> of <Gdata.G>, the function returns
a list containing the group of automorphisms of <Gdata.G> which 
stabilizes all cosets modulo <normalsg>. This group is returned as a
group of permutations on <Gdata.Glist> (which is actually the right
regular representation).
The returned list can be used with "StartsetsInCoset".


\>StartsetsInCoset( <ssets>, <coset>, <forbiddenSet>, <aim>, <autlist>, <sigdat>, <Gdata>, <lambda> ) F

Assume, we want to generate difference sets ``coset by coset'' modulo some
normal subgroup.
Let <ssets> be a (possibly empty) set of startsets, <coset> the coset from 
which to take the elements to append to the startsets from <ssets>. 
Furthermore, let <aim> be the size of the generated partial difference sets
(that is, the size of the elements from <ssets> plus the number of elements 
to be added from <coset>). Let <autlist> be a list of groups of 
automorphisms (in permutation representation) to use with the reduction 
algorithm. Here the output from `SuitableAutomorphismsForReduction' can be 
used. 
And <Gdata> and sigdat are the records as returned by 
"PermutationRepForDiffsetCalculations" and 
"SignatureDataForNormalSubgroups" (or "SignatureData", alternatively). The
parameter <lambda> is the usual one for difference sets (the number of ways
of expressing elements outside the forbidden set as quotients).

Then `StartsetsInCoset' returns a list of partial difference sets (a list of 
lists of integers) of length <aim>.

The list of permutation groups <autlist> is used for equivalence testing. 
Each equivalence test is performed calculating equivalence with respect 
to the first group, one element per equivalence class is retained and the
equivalence test is repeated using the second group from <autlist>...
Using an ascending list of automorphism groups can speed up the process 
of equivalence testing.



\beginexample
gap> G:=CyclicGroup(57);;Gdata:=PermutationRepForDiffsetCalculations(G);;
gap> sigdat:=SignatureData(Gdata,[One(Gdata.G)],8,1,10^5);;
gap> N:=First(NormalSubgroups(G),n->Size(n)=19);
gap> auts:=SuitableAutomorphismsForReduction(Gdata,N);
[ <permutation group of size 18 with 3 generators> ]
gap> coset:=GroupList2PermList(Set(RightCoset(N,Random(G))),Gdata);
[ 4, 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 37, 40, 43, 46, 49, 52, 55, 57 ]
gap> Size(StartsetsInCoset([],coset,[],4,auts,sigdat,Gdata,1));
#I  Size 19
#I  1/ 0 @ 0:00:00.001
#I  Size 20
#I  1/ 0 @ 0:00:00.001
#I  -->9 @ 0:00:00.004
#I  Size 85
#I  1/ 0 @ 0:00:00.007
#I  -->44 @ 0:00:00.033
#I  Size 144
#I  1/ 0 @ 0:00:00.006
#I  -->64 @ 0:00:00.083
64
gap> Size(StartsetsInCoset([],coset,[],4,[Group(())],sigdat,Gdata,1));
#I  Size 19
#I  1/ 0 @ 0:00:00.001
#I  Size 136
#I  1/ 0 @ 0:00:00.005
#I  -->136 @ 0:00:00.075
#I  Size 648
#I  1/ 0 @ 0:00:00.024
#I  -->648 @ 0:00:01.597
#I  Size 1140
#I  1/ 0 @ 0:00:00.044
#I  -->1140 @ 0:00:05.648
1140
\endexample