2009-07-21 18:11 +0000 [r6858-6864] Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.2.0.2 released.
* wcte12xp: Disable vpmadt032 companding by default. This
fixes a regression in 2.2.0 where certain configurations will
fail patloop test or have repeated HDLC aborts because the
VPMADT032 is modifying the clear channel or d channel data
streams. This restores the behavior to how it was in dahdi-linux
2.1.0.4. (closes issue #15498) Reported by: alecdavis Tested by:
alecdavis
* tor2: allow using port4 as timing source Fix a silly regression
introduced when strict check on the timing parameter was added
(sync-1 is the array index, not sync itself. And 0 is a special
case). (closes issue #15408) Reported by: dferrer Patches:
tor2-4th_sync.patch uploaded by dferrer (license 525)
* Revert "wct4xxp, wcte11xp: Use the default configuration by default
at startup." This reverts the change introduced by revision 6712.
This change can cause problems when there is a VPM module installed
on the quad-span digital cards.
* dahdi-base: Add support for core timing. This essentially moves the
function of dahdi_dummy into the core of DAHDI. It ensures that if
DAHDI is loaded, it will always be able to provide timing,
regardless of whether there are board drivers loaded, or if the
board drivers are properly calling dahdi_receive. If there is a
master span loaded which is calling dahdi_receive, then the behavior
will be like it is normally. This functionality is off by default,
uncomment CONFIG_DAHDI_CORE_TIMER in include/dahdi/config_dahdi.h in
order to enable it.
2009-06-30 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.2.0.1 released.
* Fix for kernel panic when echotraining is enabled on echocan that
does not support it.
* Fix for kernel panic on RHEL4 when using VPMADT032.
* Fix to allow wct4xxp, wcb4xxp, and wcte11xp to provide early timing.
2009-06-23 15:44 +0000 [r6695] Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.2.0 released.
* README: Adding a known issues section to the README
files.
2009-06-18 18:03 +0000 [r6692] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcfxo.c, drivers/dahdi/wctdm.c,
drivers/dahdi/wctdm24xxp/base.c: Fix calls to dahdi_hooksig. When
JAPAN, AUDIO_RINGCHECK, or ZERO_BATT_RING compile time options are
selected it is possible to get a kernel panic due to an invalid
pointer passed to the dahdi_hooksig function. (closes issue #15350)
Patch by: alecdavis
2009-06-12 22:30 +0000 [r6688] Jason Parker <jparker@digium.com>
* drivers/dahdi/Kbuild: Make complex conditionals work with GNU
make 3.80. Much uglier, but it works on RHEL4.
2009-06-04 21:14 +0000 [r6675] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/dahdi-base.c: Fix bug in procfs
handling. Fix bug in procfs handling where it was possible to get
a warning in lib/vsprintf.c when reading from /proc/dahdi/x.
Patch by: biohumanoid (closes issue #15252)
2009-05-27 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.2.0-rc5 released.
2009-05-27 12:48 +0000 [r6659] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/card_pri.c, drivers/dahdi/xpp/card_bri.c,
drivers/dahdi/xpp/card_fxo.c, drivers/dahdi/xpp/card_fxs.c,
drivers/dahdi/xpp/card_global.c: Fix more 'owner' for 2.6.30
to be happy. Finishing the work of r6642. Completely shut issue
#14964.
2009-05-25 08:23 +0000 [r6651-6653] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/firmwares/PIC_TYPE_3.hex,
drivers/dahdi/xpp/firmwares/PIC_TYPE_4.hex,
drivers/dahdi/xpp/firmwares/FPGA_1161.hex,
drivers/dahdi/xpp/firmwares/PIC_TYPE_1.hex,
drivers/dahdi/xpp/firmwares/PIC_TYPE_2.hex: xpp firmwares: fixes
sync issues of FXO module in a BRI/PRI Astribank * Also fixes LED
blinking issues in PRI modules * Various bugfixes in the PICs.
* drivers/dahdi/xpp/firmwares/USB_FW.hex: USB_FW.hex: Allow setting
caps. even when FPGA is loaded. Note that They will only take
effect after a reset. Firmware rev. 7071.
2009-05-19 16:09 +0000 [r6635-6642] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/xpp_dahdi.c, drivers/dahdi/xpp/xpp_usb.c,
drivers/dahdi/xpp/xbus-core.c, drivers/dahdi/xpp/xdefs.h: xpp:
'owner' property of procfs was dropped in 2.6.30. This adds a
compatibility macro for older versions that is a noop for kernels
>= 2.6.30. (closes issue #14964)
* drivers/dahdi/xpp/xproto.h, drivers/dahdi/xpp/xbus-sysfs.c,
drivers/dahdi/xpp/xbus-core.c, drivers/dahdi/xpp/card_global.c,
drivers/dahdi/xpp/xproto.c, drivers/dahdi/xpp/xbus-core.h,
drivers/dahdi/xpp/xbus-pcm.c: xpp: fix the Astribank state
machine This generally is a case that would not happen in the
wild, though.
* drivers/dahdi/xpp/card_bri.c, drivers/dahdi/xpp/xdefs.h: xpp:
report in sysfs if bri module uses hardhdlc support
* drivers/dahdi/xpp/calibrate_slics (removed): xpp: remove obsolete
script calibrate_slics
* drivers/dahdi/xpp/card_pri.c, drivers/dahdi/xpp/mmapbus.c,
drivers/dahdi/xpp/card_bri.c, drivers/dahdi/xpp/card_fxo.c,
drivers/dahdi/xpp/mmapdrv.c, drivers/dahdi/xpp/xbus-sysfs.c,
drivers/dahdi/xpp/Kbuild, drivers/dahdi/xpp/card_fxs.c,
drivers/dahdi/xpp/xdefs.h: Replaece member bus_id with dev_name()
and set_dev_name() As of 2.6.26 the macros dev_name() and
set_dev_name() are used to read and set (respectively) the bus_id
member in sysfs. As of 2.6.30 bus_id is gone. This patch provides
comaptiobility macros for older kernel versions and removes
direct usage of bus_id. (closes issue #14965) Patches:
xpp_2630_dev_name.diff uploaded by tzafrir (license 46)
* drivers/dahdi/voicebus, drivers/dahdi/vpmadt032_loader: ignore
generated files in voicebus and vpmadt032_loader
2009-05-15 23:37 +0000 [r6625-6628] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/voicebus/GpakCust.c: voicebus: Use '&' not '|' when
checking for a bit.
* drivers/dahdi/voicebus/GpakCust.c: voicebus: Make the
enable/disable echocan messages debug again. I accidentally
changed to print everytime. They should only be printed if
DEBUG_ECHOCAN is specified in the debug module parameter.
2009-05-14 14:49 +0000 [r6621] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcte12xp/base.c: wcte12xp: Set the syncsrc in the
span appropriately. Before this commit, dahdi_tool would report
"Internally clocked" for boards supported by the wcte12xp driver
both when receiving timing from the span and providing it to the
span. Now it reports "Internally clocked" if providing timeing to
the span, and the card if receiving timeing from the span.
DAHDI-65.
2009-05-12 22:30 +0000 [r6606-6610] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/Kbuild: use proper case for variable name :-)
* drivers/dahdi/Kbuild: Allow VPMADT032 and HPEC binary modules to
be used on platforms where ARCH is set to the new 'generic' x86
flavor available in recent Linux kernel releases
* drivers/dahdi/Kbuild: emit warning messages when DAHDI is being
built on a CPU architecture that does not support HPEC or the
VPMADT032 firmware loader, so the user will know why they are not
included clean up the conditional logic for these items in the
Kbuild file
* Makefile: remove another unused variable
2009-05-11 17:48 +0000 [r6589-6590] Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.2.0-rc4 released.
* drivers/dahdi/wcte12xp/base.c: wcte12xp: Expose vpm parameters as
module parameters. Expose the vpmnlptype, vpmnlpthresh, and
vpmnlpmaxsupp as module parameters like for the wctdm24xxp.
DAHDI-261
* drivers/dahdi/wcte12xp/base.c, drivers/dahdi/wctdm24xxp/base.c,
drivers/dahdi/voicebus/GpakApi.h,
drivers/dahdi/voicebus/GpakCust.c,
drivers/dahdi/voicebus/GpakCust.h: voicebus: Update the default
vpmadt032 parameters. Move the echo can channel parameters into a
common location for both the wcte12xp and wctdm24xxp drivers that
use the voicebus module. This is intended to make it clearer
which differences are required between the clients. Additionally,
update the default parameters to the new recommended values.
VPMADT032-37
2009-05-07 19:42 +0000 [r6572] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcte12xp/base.c, drivers/dahdi/wctdm24xxp/base.c,
drivers/dahdi/voicebus/GpakCust.c,
drivers/dahdi/voicebus/GpakCust.h: voicebus: Create workqueue for
each vpmadt032 instance. Depending on the system latency, the
deferred work for the vpmadt032 can take up to 200ms. This change
allows each vpmadt032 to use its own workqueue, and not the
global system workqueue. This prevents vpm operations from
blocking the main system workqueue for extended periods. This
restores the behavior to the way it was before the common
vpmadt032 code was moved out of the wctdm24xxp and wcte12xp
drivers. DAHDI-260 voicebus-squash: Adding the wq name.
2009-05-07 19:42 +0000 [r6568-6572] Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.2.0-rc3 released.
* drivers/dahdi/wcte12xp/base.c, drivers/dahdi/wctdm24xxp/base.c,
drivers/dahdi/voicebus/GpakCust.c,
drivers/dahdi/voicebus/GpakCust.h: voicebus: Create workqueue for
each vpmadt032 instance. Depending on the system latency, the
deferred work for the vpmadt032 can take up to 200ms. This change
allows each vpmadt032 to use its own workqueue, and not the
global system workqueue. This prevents vpm operations from
blocking the main system workqueue for extended periods. This
restores the behavior to the way it was before the common
vpmadt032 code was moved out of the wctdm24xxp and wcte12xp
drivers.
* drivers/dahdi/wcte12xp/base.c, drivers/dahdi/wctdm24xxp/base.c,
drivers/dahdi/voicebus/GpakCust.h: voicebus: Changing default NLP
type to 'suppression'. The 'suppression' default for the NLP
provides better echo canceling performance. Also ensures that the
wctdm24xxp and wcte12xp driver use the same default values.
2009-05-05 17:32 +0000 [r6564] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/voicebus/GpakCust.c: voicebus: Use the companding
type on the span when enabling echocan.
2009-05-04 20:36 +0000 [r6562] Doug Bailey <dbailey@digium.com>
* drivers/dahdi/voicebus/GpakCust.c: Insure that vpmnlptype,
vpmnlpmaxsupp, and vpmnlpthresh are set back to module level
defaults when echo can is freed. (Previously they were zero'd
out) DAHDI-257
2009-05-02 07:53 +0000 [r6556] Kevin P. Fleming <kpfleming@digium.com>
* Makefile: Remove explicit passing of ARCH to kernel build system
There is no value in setting a value for ARCH and passing it to
the kernel build system; the configured kernel headers/sources
already have an architecture specified and can't be used for any
other architecture anyway.
2009-05-01 16:43 +0000 [r6549-6554] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/dahdi-base.c: dahdi-base: define
__RW_LOCK_UNLOCKED() Linux 2.6.9 does not contain that
definition, but the older definition is deprecated since it
defeats lock state checking. DAHDI-253
* drivers/dahdi/voicebus/Makefile (added): voicebus: Need Makefile
to build on 2.6.9 DAHDI-253
* drivers/dahdi/wcb4xxp/base.c: wcb4xxp: Define mmiowb if not
already defined. Linux kernel 2.6.9 does not define mmiowb.
DAHDI-253
* drivers/dahdi/wctc4xxp/base.c: wctc4xxp: spin_trylock_irqsave is
not defined on some kernels. DAHDI-253
* drivers/dahdi/wctc4xxp/base.c: wctc4xxp: Defined gfp_t for
earlier kernels. This definition was just copied from the xpp
driver. DAHDI-253
* drivers/dahdi/wctc4xxp/base.c: wctc4xxp: Fix inclusion of
linux/io.h on 2.6.9 kernels. DAHDI-253
2009-04-30 20:59 +0000 [r6544-6546] Kevin P. Fleming <kpfleming@digium.com>
* include/dahdi/user.h: Fix compilation of applications that use
DAHDI ioctls Defining ioctl codes in this file requires that
linux/ioctl.h be included first.
* drivers/dahdi/wcte12xp/base.c, drivers/dahdi/wct4xxp/base.c,
drivers/dahdi/wctdm24xxp/base.c: Ensure that vpmsupport=0 module
parameter takes proper effect For these drivers, when the
vpmsupport module parameter is set to zero, don't even register
the span as supporting echo cancellation. DAHDI-250
2009-04-30 13:59 +0000 [r6542] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/firmwares/FPGA_1161.hex: xpp: A new FPGA
firmware to hopefully help with BRI/FXO.
2009-04-29 18:24 +0000 [r6523-6529] Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.2.0-rc2 released.
* drivers/dahdi/dahdi_echocan_kb1.c, drivers/dahdi/wcte12xp/base.c,
include/dahdi/user.h, include/dahdi/kernel.h,
drivers/dahdi/adt_lec.c, drivers/dahdi/dahdi_echocan_jpah.c,
drivers/dahdi/wct4xxp/base.c, drivers/dahdi/ecdis.h,
drivers/dahdi/wctdm24xxp/base.c,
drivers/dahdi/dahdi_echocan_mg2.c,
drivers/dahdi/wcte12xp/wcte12xp.h,
drivers/dahdi/voicebus/GpakCust.c, drivers/dahdi/hpec/hpec.h,
drivers/dahdi/wcb4xxp/wcb4xxp.h,
drivers/dahdi/dahdi_echocan_sec2.c,
drivers/dahdi/voicebus/GpakCust.h,
drivers/dahdi/hpec/dahdi_echocan_hpec.c,
include/dahdi/dahdi_config.h, drivers/dahdi/wcb4xxp/base.c,
drivers/dahdi/wctdm24xxp/wctdm24xxp.h,
drivers/dahdi/dahdi_echocan_oslec.c, drivers/dahdi/dahdi-base.c,
drivers/dahdi/dahdi_echocan_sec.c: echocan: Improve interface for
echo cancelers. Echo cancelers are now able to report if they are
able to automatically disable their NLP portions in the presence
of tones in the audio stream. Also, the interface is changed to
allow user space to just disable the NLP portion of the echo
canceler. These changes improve fax and modem handling in DAHDI.
This commit merges in the changes on
http://svn.digium.com/svn/dahdi/linux/team/kpfleming/echocan_work
Patch by: kpfleming Also contains improvements to CED tone
detection. (closes issue #13286) Reported by: viniciusfontes
* drivers/dahdi/wct4xxp/base.c: wct4xxp: Fix problem when timing
source is via external cable.
* drivers/dahdi/wcte12xp/base.c, drivers/dahdi/wcte12xp/voicebus.c
(removed), drivers/dahdi/wcte12xp/vpmadt032.c (removed),
drivers/dahdi/voicebus (added), drivers/dahdi/voicebus/voicebus.c
(added), drivers/dahdi/wctdm24xxp/base.c, drivers/dahdi/Kconfig,
drivers/dahdi/wcte12xp/wcte12xp.h,
drivers/dahdi/wcte12xp/GpakErrs.h (removed),
drivers/dahdi/wctdm24xxp/GpakApi.c (removed),
drivers/dahdi/wcte12xp/vpmadt032.h (removed),
drivers/dahdi/wctdm24xxp/voicebus.c (removed),
drivers/dahdi/voicebus/voicebus.h (added), Makefile,
drivers/dahdi/wctdm24xxp/GpakApi.h (removed),
drivers/dahdi/vpmadt032_loader/dahdi_vpmadt032_loader.c (added),
drivers/dahdi/wcte12xp/Kbuild, drivers/dahdi/voicebus/Kbuild
(added), drivers/dahdi/wctdm24xxp/GpakHpi.h (removed),
drivers/dahdi/wctdm24xxp/Kbuild, drivers/dahdi/voicebus.c
(removed), drivers/dahdi/voicebus.h (removed),
drivers/dahdi/vpmadt032_loader (added),
drivers/dahdi/wcte12xp/GpakApi.c (removed),
drivers/dahdi/wcte12xp/gpakenum.h (removed),
drivers/dahdi/Kbuild, drivers/dahdi/voicebus/gpakenum.h (added),
drivers/dahdi/voicebus/GpakApi.c (added),
drivers/dahdi/adt_lec.c, drivers/dahdi/wcte12xp/GpakApi.h
(removed), drivers/dahdi/voicebus/GpakApi.h (added),
drivers/dahdi/voicebus/GpakCust.c (added),
drivers/dahdi/wctdm24xxp/gpakenum.h (removed),
drivers/dahdi/voicebus/gpakErrs.h (added),
drivers/dahdi/wctdm24xxp/GpakCust.c (removed),
drivers/dahdi/voicebus/GpakCust.h (added),
drivers/dahdi/voicebus/GpakHpi.h (added),
drivers/dahdi/wctdm24xxp/gpakErrs.h (removed),
drivers/dahdi/firmware/Makefile,
drivers/dahdi/voicebus/vpmadtreg.c (added),
drivers/dahdi/wctdm24xxp/GpakCust.h (removed),
drivers/dahdi/voicebus/vpmadtreg.h (added),
drivers/dahdi/wctdm24xxp/wctdm24xxp.h: voicebus: Move common
vpmadt032 interface into voicebus module. The voicebus library
was previously linked into both the wcte12xp and wctdm24xxp
drivers. It is now broken out into it's own module and the common
parts of the vpmadt032 interface are now located in that module
to reduce duplication between the wcte12xp and wctdm24xxp
drivers.
* drivers/dahdi/wctc4xxp/base.c: wctc4xxp: Change netif_rx_xxx to
napi_xxx The netif_rx_xxx functions were dropped from the linux
kernel source on 2009-01-21 in commit
288379f050284087578b77e04f040b57db3db3f8. (closes issue #14963)
Reported by: tzafrir
* drivers/dahdi/wcte12xp/base.c,
drivers/dahdi/wcte12xp/vpmadt032.c,
drivers/dahdi/wcte12xp/wcte12xp.h: wcte12xp: Update cmdqueue
processing. The command queue for reading from the registers on
the framer is now stored in a linked_list instead of an array.
Allows for the locks to protect this structure to be held for
shorter periods of time and reduces the need to cycle through all
the elements in the array to decide if there is a command in the
queue to process. Remove the usecount and dead members from
struct t1 since the module reference count will allow us to know
when it's safe to free up the memory. This change also moves
alarm processing out of the interrupt handler and removes the
need for special interrupt handling of commands.
* drivers/dahdi/dahdi_dummy.c: dahdi_dummy: Remove real-time clock
support. This removes support for using the real-time clock as a
timing source in dahdi_dummy. Instead, the normal kernel timers
method is now more accurate since it keeps track of how much real
time has passed to determine how many times to call dahdi_receive
and dahdi_transmit. This method was originally suggested by bmd.
(closes issue #13930) (closes issue #14884) Reported by: tzafrir
Tested by: dbackeberg, ask
* drivers/dahdi/voicebus.c: voicebus: Removing unused code blocks
and space in flag definitions.
2009-04-27 20:03 +0000 [r6513] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/card_bri.c, drivers/dahdi/xpp/Kbuild: xpp:
hard_hdlc support for the BRI module. The BRI module will now use
hardhdlc unless the DAHDI tree has been patched with the
bri_dchan patch, in which case the old "bristuffed" code will be
used. Thus it is now built by default.
2009-04-25 16:35 +0000 [r6487] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* build_tools/live_dahdi: adapt live_dahdi to current xpp tools *
More varibles to set through the environment * Different way to
list drivers
2009-04-23 15:11 +0000 [r6457-6466] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/firmwares/PIC_TYPE_3.hex,
drivers/dahdi/xpp/firmwares/PIC_TYPE_4.hex,
drivers/dahdi/xpp/firmwares/USB_FW.hex,
drivers/dahdi/xpp/firmwares/FPGA_1161.hex,
drivers/dahdi/xpp/firmwares/PIC_TYPE_1.hex,
drivers/dahdi/xpp/firmwares/PIC_TYPE_2.hex: Don't set the Id
keyword on firmwares; restore original ID The Id SVN keyword is
set locally in Xorcom and used as an identifier. That Id should
not be overriden by this SVN repository.
* drivers/dahdi/xpp/firmwares/FPGA_1161.hex: xpp: FPGA_1161.hex:
fix FXO PCM issues (new boards only) FPGA_1161.hex rev. 7024.
2009-04-22 12:53 +0000 [r6444] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi-base.c: don't refer to macros from
dahdi_config.h until after it has been included use the proper
type for the flags variable in dahdi_ppp_xmit()
2009-04-21 22:16 +0000 [r6430] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* include/dahdi/user.h, include/dahdi/kernel.h: Move
DAHDI_DEFAULT_MTU_MRU from kernel.h to user.h The macro
DAHDI_DEFAULT_MTU_MRU needs to be exposed to userspace to build
tools/ppp/dahdi.c .
2009-04-20 10:49 +0000 [r6407-6409] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/firmwares/PIC_TYPE_3.hex,
drivers/dahdi/xpp/firmwares/PIC_TYPE_4.hex,
drivers/dahdi/xpp/firmwares/FPGA_1161.hex,
drivers/dahdi/xpp/firmwares/PIC_TYPE_1.hex,
drivers/dahdi/xpp/firmwares/PIC_TYPE_2.hex: xpp firmware:
stability fixes for firmwares of new Astribanks FPGA_1161.hex:
xpp rev 7007 PIC_TYPE_*.hex: xpp rev 7000
* drivers/dahdi/xpp/xpp_dahdi.c, drivers/dahdi/xpp/xproto.h,
drivers/dahdi/xpp/card_pri.c, drivers/dahdi/xpp/card_bri.c,
drivers/dahdi/xpp/card_fxo.c, drivers/dahdi/xpp/xpp_dahdi.h,
drivers/dahdi/xpp/xbus-core.c, drivers/dahdi/xpp/card_fxs.c: xpp:
Do use information about number of ports the Astribank provides
* drivers/dahdi/xpp/init_card_1_30: xpp: Fix FXS calibration (dec
rather than hex)
2009-04-16 19:35 +0000 [r6376-6393] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/card_fxs.c, drivers/dahdi/xpp/init_card_1_30,
drivers/dahdi/xpp/init_card_2_30: xpp fxs/fxo: PCM and DTMF fixes
* drivers/dahdi/xpp/card_fxs.c: xpp fxs: Notify the user just one
about wrong VMWI config From xpp rev. 6974.
* drivers/dahdi/xpp/card_fxs.c: xpp fxs: Ignore registers of
disabled SLICs From xpp rev. 6979
* drivers/dahdi/xpp/card_bri.c: xpp bri: explicitly turn off leds
on startup If NT/TE was changed (e.g: happened because of
firmware bug) We would be left with a lit led we don't know
about. From xpp rev. 6990
2009-04-10 09:53 +0000 [r6344] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/astribank_hook.sample (removed): Move
astribank_hook from linux to tools. Install it by default
2009-04-04 14:22 +0000 [r6325] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Also install dahdi_config.h to /usr/include/dahdi
2009-04-02 20:34 +0000 [r6301-6312] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/astribank_hook.sample: Update the sample udev
astribank_hook for TwinStar
* drivers/dahdi/xpp/firmwares/PIC_TYPE_3.hex (added),
drivers/dahdi/xpp/xpp.rules,
drivers/dahdi/xpp/firmwares/PIC_TYPE_4.hex (added),
drivers/dahdi/xpp/.version,
drivers/dahdi/xpp/firmwares/FPGA_1161.hex (added),
drivers/dahdi/xpp/firmwares/USB_FW.hex,
drivers/dahdi/xpp/firmwares/Makefile,
drivers/dahdi/xpp/firmwares/PIC_TYPE_1.hex (added),
drivers/dahdi/xpp/firmwares/PIC_TYPE_2.hex (added): XPP: support
for 116x Astribanks. * New software to load in the udev rules *
New control protocol ("MPP") * More modular FPGA firmware From
Xorcom rev. 6963.
* drivers/dahdi/xpp/xbus-pcm.c: Reduce the rate for a potentially
annoying message This message is used when an xpp span is a DAHDI
sync master but also set to take timing from the DAHDI master.
This means wrong settings: user is wasting CPU cycles. However
notifying the user about it every second is still too much.
2009-04-02 17:27 +0000 [r6285-6294] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi-base.c: ensure that the structure being
returned by DAHDI_GET_BUFINFO is completely initialized
2009-03-26 18:33 +0000 [r6262] Wendell Thompson <wthompson@digium.com>
* drivers/dahdi/voicebus.c: Fixes DAHDI-214 crash on driver unload.
Affects wcte12xp and wctdm24xxp modules.
2009-03-24 19:08 +0000 [r6237-6246] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Eliminate unnecessary checks for
NULL before freeing memory.
* drivers/dahdi/wctc4xxp/base.c: Do not allocate more memory than
is needed when sending packets.
* drivers/dahdi/wctc4xxp/base.c: Block runt packets from the
transcoder. Tested by: Walter Klomp
* drivers/dahdi/wctc4xxp/base.c: Do not define the debug flags if
CONFIG_SLUB is not set. Some versions of the kernel
(2.6.18-92.1.22.el5) have patches in them to panic if a slab
cache is created with unsupported flags.
2009-03-24 15:59 +0000 [r6236] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/dahdi-base.c: Make sure the requested echo
canceller name is NULL-terminated. Make sure that the that the
name of the echo canceller requested in the DAHDI ioctl
DAHDI_ATTACH_ECHOCAN is NULL-terminated.
2009-03-23 23:49 +0000 [r6217-6228] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Verify checksum on the RTP IP
header before queueing.
* drivers/dahdi/wctc4xxp/base.c: Poll the card in a kernel timer
when several channels are open. Polling the driver increases
overall system throughput when there are several transcoding
channels open by reducing the number of interrupts the the TC400M
generates.
* drivers/dahdi/wctc4xxp/base.c: Optionally show total number of
packets dropped when channel is closed.
* drivers/dahdi/wctc4xxp/base.c: Do not handle duplicate reponses.
It is possible for system activity to prevent the wctc4xxp driver
from responding the the firmware on the TC400M for a period of
time. If this occurs, the TC400M will resend a response to a
command that we sent. This duplicate reponse will then sometimes
confuse the driver. Normally this would manifest as an attempt to
connect the same channel together in a transcoding session.
* drivers/dahdi/wctc4xxp/base.c: Set TX_COMPLETE atomically with
changes to the waiting_for_response_list. This change is to catch
a condition where it is possible, for whatever reason, for a
response to come in before the request is marked tx complete. If
this happened, it was possible to leak the response packet and
double complete the command.
* drivers/dahdi/wctc4xxp/base.c: split send_trans_connect into a
connect / disconnect pair. Trivial change that makes the code
read more naturally. Also changes the order of members in the
channel_pvt structure. For more natural alignment. Both
non-functional changes.
* drivers/dahdi/wctc4xxp/base.c: If the driver fails to register,
make sure we cleanup the command cache.
* drivers/dahdi/wctc4xxp/base.c: Setup the TC400M to poll the own
bit on the descriptor ring. On certain systems having the
hardware poll the descriptor ring provides more reliable
operation that strobbing the transmit demand poll and receive
demand poll register.
* drivers/dahdi/wctc4xxp/base.c: Make sure that messages sitting in
the outbound queue cause the timer to reschedule.
* drivers/dahdi/wctc4xxp/base.c: Refactor channel command handling.
Makes commands and reponses clearer and easier to trouble shoot,
reduces pressure on the stack, and brings driver closer to kernel
coding standards.
2009-03-18 18:48 +0000 [r6201] Jason Parker <jparker@digium.com>
* drivers/dahdi/dahdi_dynamic_loc.c: Fix a typo
2009-03-17 17:59 +0000 [r6170-6191] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/firmwares/USB_FW.hex: xpp USB_FW.hex rev 6885:
fixes reading label from USB Previous USB_FW.hex, 6770, has
failed to properly read the USB iSerial field ("Label" in xpp
terms). This is fixed here.
* include/dahdi/dahdi_config.h (added), include/dahdi/kernel.h,
drivers/dahdi/xpp/Kbuild, drivers/dahdi/dahdi-base.c,
drivers/dahdi/dahdi_config.h (removed): Move dahdi_config.h to be
under include/dahdi/ This makes dahdi_config.h part of the
"offcial" interface to external modules. Practically most of its
configuration items are internal to dahdi-base. But some are
intended for other drivers.
* drivers/dahdi/biquad.h, include/dahdi/kernel.h,
drivers/dahdi/ecdis.h, drivers/dahdi/dahdi-base.c: Make ecdis.h
used by dahdi-base.h alone ecdis.h is no longer #include-d in
kernel.h . it was there because of decleration of some structs
that are part of struct dahdi_chan. The declerations of those
structs were moved into kernel.h directly.
2009-03-13 10:21 +0000 [r6134-6147] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/dahdi-base.c: Fix handling of 'w' in a pulse dial
string Make the special "digit" 'w' work in pulse dialing as it
works with tone dialing (a delay of 0.5 second till the next
digit). Note that the digit gets uppercased before it gets to
this function. (closes issue #13999) Reported by: IgorG Patches:
dahdi-base.c.pulse2.diff uploaded by tzafrir (license 46) Tested
by: litnimax
* drivers/dahdi/xpp/xpp.conf: A better sample xpp.conf
* drivers/dahdi/xpp/init_card_3_30,
drivers/dahdi/xpp/init_card_4_30,
drivers/dahdi/xpp/init_card_1_30,
drivers/dahdi/xpp/init_card_2_30: xpp init_card_* scripts now
less verbose * Demote some messages to be debug messages. *
Rephrase the message about defaults for the PRI module (the
driver's defaults are used, which is OK)
* drivers/dahdi/dahdi-base.c: Fix handling of DAHDI_GETGAINS_V1
missing from r6124 .
2009-03-11 14:51 +0000 [r6113-6126] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/voicebus.c: Allow 10ms for voicebus hardware to
settle after reset. The voicebus hardware needs more time to
settle after a reset. The short settle time explains why there
was frequently one IRQ miss reported in the proc file for the
spans. Reported by: jsloan
* drivers/dahdi/wct4xxp/base.c: Relax ident wheel requirements. Do
not require the first card to be set to 0 and allow skips in the
ident wheel numbers. The ident wheel allows a user to determine
the order that cards register there spans with DAHDI. (closes
issue #13078) Reported by: opticron Patch by: opticron
* include/dahdi/user.h, drivers/dahdi/dahdi-base.c: Fix direction
bits on several ioctls. (related to issue #14499) Reported by: ys
* include/dahdi/kernel.h, drivers/dahdi/dahdi_transcode.c: Keep
transcoders on a list in registration order. This fixes a bug
where it was possible for there to be a transcoder in position
"1" but not in position "0" if a transcoder hardware driver was
loaded, unloaded, and reloaded again without also reloading
dahdi_transcode. The result is that codec_dahdi fails to
enumerate all the transcoders in the system. (closes issue
#14627) Reported by: xblurone
* drivers/dahdi/dahdi-base.c: Eliminating an unused parameter to
dahdi_specchan_open.
2009-03-06 21:43 +0000 [r6096] Wendell Thompson <wthompson@digium.com>
* drivers/dahdi/xpp/xpp_usb.c, drivers/dahdi/wctc4xxp/base.c,
drivers/dahdi/voicebus.c: Workarounds for SLUB sysfs problems in
kernel 2.6.22 with CONFIG_SLUB and CONFIG_SLUB_DEBUG, as in
Fedora Core 6. Fixes kernel oops when loading/unloading dahdi
modules. DAHDI-226
2009-03-05 18:53 +0000 [r6079] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/firmwares/FPGA_1141.hex,
drivers/dahdi/xpp/firmwares/FPGA_1151.hex,
drivers/dahdi/xpp/firmwares/FPGA_FXS.hex: xpp: FPGA firmwares
6799 New FPGA firmware with a number of bug fixes.
2009-03-01 13:56 +0000 [r6046] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/init_card_3_30, drivers/dahdi/xpp/xpp_dahdi.c,
drivers/dahdi/xpp/xproto.h, drivers/dahdi/xpp/.version,
drivers/dahdi/xpp/card_fxo.c, drivers/dahdi/xpp/xpp_dahdi.h,
drivers/dahdi/xpp/firmwares/USB_FW.hex,
drivers/dahdi/xpp/xbus-sysfs.c, drivers/dahdi/xpp/xframe_queue.c,
drivers/dahdi/xpp/xbus-core.c, drivers/dahdi/xpp/card_global.c,
drivers/dahdi/xpp/xbus-core.h, drivers/dahdi/xpp/Changelog_xpp,
drivers/dahdi/xpp/card_global.h, drivers/dahdi/xpp/xbus-pcm.c:
New XPP code: xpp rev 6795: * Fix cases where the command_queue
overflowed during initialization. - Also add a
'command_queue_length' parameter to xpp.ko * More migrations to
sysfs: - Add a 'transport' attribute to our astribank devices
which points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4 - Move
/proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span - Migrate from /proc/xpp/sync
to: /sys/bus/astribanks/drivers/xppdrv/sync - New 'offhook'
attribute in: /sys/bus/xpds/devices/??:?:?/offhook * PRI: change
the "timing" priority to match the convention used by other PRI
cards -- I.e: lower numbers (not 0) have higher priority. * FXO:
- Power denial: create two module parameters instead of
hard-coded constants (power_denial_safezone,
power_denial_minlen). For sites that get non-standard
power-denial signals from central office on offhook. - Don't
hangup on power-denial, just notify Dahdi and wait for - Fix
caller-id detection for the case central office sends it before
first ring without any indication before. Asterisk's desicion. *
USB_FW.hex: - Fixes cases where firmware loading would fail.
2009-02-11 05:41 +0000 [r6005] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Use the proper pci_device when
handling dma buffers.
2009-02-10 14:07 +0000 [r5997] Matthew Fredrickson <creslin@digium.com>
* drivers/dahdi/wcb4xxp/base.c: Set default alarm debounce time to
500ms to debounce NT L1 deactivations
2009-02-09 06:03 +0000 [r5987] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/xproto.c: Fix building DAHDI with module
unloading disabled As moduel_refcount is only used for debugging,
disable it in this non-common case. (Closes issue #14402)
2009-02-02 14:13 +0000 [r5936] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi_echocan_kb1.c,
drivers/dahdi/hpec/dahdi_echocan_hpec.c, include/dahdi/kernel.h,
drivers/dahdi/dahdi_echocan_jpah.c,
drivers/dahdi/dahdi_echocan_mg2.c,
drivers/dahdi/dahdi_echocan_oslec.c, drivers/dahdi/dahdi-base.c,
drivers/dahdi/dahdi_echocan_sec.c, drivers/dahdi/hpec/hpec.h,
drivers/dahdi/dahdi_echocan_sec2.c: Array-style echo canceller
updates first appeared in Zaptel, because HPEC only supports that
mode. However, when the function for doing array-style updates
was written, the argument names were reversed. In Zaptel this did
no harm, because HPEC was the only module that used array-style
updates. When DAHDI was created, non-array-style updates were
removed, and the existing modules were converted to using
array-style updates. Unfortunately the new code was written based
on the argument names, which were incorrect. This caused all the
echo cancellers to be broken (except HPEC, although we did not
know that at the time), and it was corrected by reversing the
order of the arguments passed when the array-style update
function was called (leading to a confusing mismatch). This fixed
all the non-HPEC modules, but left HPEC broken, which was just
discovered. This commit corrects all these problems, so that the
argument names and the data passed actually make sense, and all
the modules work properly.
2009-01-30 23:42 +0000 [r5924] Matthew Fredrickson <creslin@digium.com>
* drivers/dahdi/wcb4xxp/base.c: Make sure that we pass alarm
notification up the stack whenever alarms occur on the B410P
2009-01-30 16:53 +0000 [r5916] Mike Spiceland <mspiceland@digium.com>
* drivers/dahdi/wctdm24xxp/base.c: Do a stricter test for FXS
modules. FXO modules will be hi-z during this time and the value
will be undefined. This test ensures that FXO modules will not
falsely trigger during FXS probes. The value of 0x88 from
register 1 has been confirmed during this stage on quad and
single port modules.
2009-01-28 23:17 +0000 [r5895] Richard Mudgett <rmudgett@digium.com>
* include/dahdi/user.h: Minor comment rearangement to avoid
possible confusion.
2009-01-28 04:41 +0000 [r5870] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcb4xxp/base.c: Ensure the teignorered parameter is
exposed as a module parameter. Related to issue #14031 .
2009-01-27 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0.4 released.
* Fix for a kernel panic regression when heavily using pseudo
channels (issue #14183) (merged r5811 and r5819 from the trunk)
* Fix the safety check in tor2 to be for SPANS_PER_CARD
(issue #13954) (merged r5590 from the trunk).
2008-12-17 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0.3 released.
2008-12-17 15:57 +0000 [r5535-5576] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcb4xxp/base.c: Do not propogate received
HDLC frames on channels that are not configured. Issue: DAHDI-217
* drivers/dahdi/wcb4xxp/base.c: Use %p to print out pointer values.
* drivers/dahdi/wcb4xxp/base.c: Remove an endless while loop.
* drivers/dahdi/wcte12xp/base.c: Quiet some warnings about
possible use of uninitialized variables.
* build_tools/live_dahdi: live_dahdi: Use the nonrelative path for
the dahdi-tools folder in live_dahdi.
2008-12-15 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0.2 released.
2008-12-15 20:31 +0000 [r5534-5535] Shaun Ruffell <sruffell@digium.com>
* build_tools/live_dahdi: live_dahdi: Use the nonrelative path for
the dahdi-tools folder in live_dahdi.
* drivers/dahdi/wcte12xp/base.c: wcte12xp: do not release a
spinlock that we did not acquire.
2008-12-12 14:32 +0000 [r5523] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi-base.c: use a format string for
request_module, so the compiler will do the right thing
2008-12-11 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0.1 released.
2008-12-11 21:46 +0000 [r5509] Shaun Ruffell <sruffell@digium.com>
* include/dahdi/kernel.h: Add definition of dev_notice for kernels
< 2.6.17.
2008-12-11 21:03 +0000 [r5498-5504] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/xbus-sysfs.c: One more place whe
old-but-not-ancient hotplug is used.
* drivers/dahdi/dahdi_echocan_oslec.c: Send all samples to OSLEC,
rather than just the first. (closes issue #14036) Reported by:
marcotasto Patches: dahdi_echocan_oslec.patch uploaded by
marcotasto (license 635)
* drivers/dahdi/xpp/xbus-sysfs.c, drivers/dahdi/xpp/xbus-core.h,
drivers/dahdi/xpp/xdefs.h: Add a separate case for hotplug of
kernels <= 2.6.9 .
2008-12-11 20:19 +0000 [r5497] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/dahdi_dummy.c: If we're using the
system tick, don't use the hrtimer interface.
2008-12-11 18:57 +0000 [r5482-5492] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/xbus-sysfs.c: Fix the xpp OLD_HOTPLUG fix.
* drivers/dahdi/dahdi_dummy.c: Fix building dahdi_dummy for kernels
2.6.13, 2.6.14: Those kernels don't have RTC yet.
* drivers/dahdi/wcb4xxp: Yet Another directory in which to ignore
modules.order
* drivers/dahdi/wcb4xxp/base.c: Remove an include that is not
available before 2.6.15 and is not needed
* drivers/dahdi/xpp/xbus-sysfs.c, drivers/dahdi/xpp/xbus-core.h: A
bit less maigc with OLD_HOTPLUG_SUPPORT
* drivers/dahdi/dahdi-base.c: Fixed a typo that broke building
dahdi-base with kernels < 2.6.13
2008-12-11 16:43 +0000 [r5481] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Fix compilation issues
on 2.6.15 and below kernels. Thanks tzafrir.
2008-12-09 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0 released.
2008-12-09 18:49 +0000 [r5453] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* live_dahdi (added): live_dahdi - test dahdi without fully
installing it.
2008-12-06 22:23 +0000 [r5444] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp, drivers/dahdi/wcte12xp, drivers/dahdi,
drivers/dahdi/wct4xxp, drivers/dahdi/wctc4xxp,
drivers/dahdi/wctdm24xxp: Ignore modules.order in modules
directories.
2008-12-04 20:57 +0000 [r5433-5434] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Fix an erroneous warning and
ensure that the sample size is set correctly when decoding G723
packets. Issue: DAHDI-198
* drivers/dahdi/dahdi_transcode.c: Do not use an already built
channel if the source and destination formats do not match the
formats we want. This fixes a regression introduced by the new
transcoder interface where a translation path from one complex
codec to another can result in garbled audio.
2008-12-01 17:58 +0000 [r5413-5420] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Service the transmit descriptor
ring before the receive descriptor ring so that commands that are
still sitting on the transmit descriptor ring are not completed
twice.
2008-11-27 09:59 +0000 [r5397-5403] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: dahdi-linux: Remove README.Astribank.html generation.
* drivers/dahdi/xpp/README.Astribank (removed): Moving
README.Astribank to dahdi-tools .
* drivers/dahdi/xpp/README.Astribank: Fixes and some work in
progress on DAHDI Astribank README.
2008-11-25 20:00 +0000 [r5384] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcte11xp.c, drivers/dahdi/wct1xxp.c: Validate the
timing priority on the wcte11xp and wct1xxp driver.
2008-11-25 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0-rc5 released.
2008-11-25 20:00 +0000 [r5383-5384] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcte11xp.c, drivers/dahdi/wct1xxp.c: Validate the
timing priority on the wcte11xp and wct1xxp driver.
* drivers/dahdi/tor2.c: Validate that the span priority is valid in
the tor2 driver. Patch provided by tzafrir.
2008-11-24 05:32 +0000 [r5367-5374] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcb4xxp/base.c: Additional debugging code. Patch
provided by akohlsmith. Issue DAHDI-173.
* drivers/dahdi/wcb4xxp/base.c: Add a 'spanfilter' module parameter
in order to isolate debugging information to just the spans of
interest. Patch provided by akohlsmith. Issue DAHDI-173.
* drivers/dahdi/wcb4xxp/base.c, drivers/dahdi/wcb4xxp/wcb4xxp.h:
Use counter of pending HDLC frames in order to eliminate the need
to send a zero-byte frame to kick start the transmission process.
Patch provided by akohlsmith. Issue DAHDI-173.
* drivers/dahdi/wcb4xxp/base.c, drivers/dahdi/wcb4xxp/wcb4xxp.h: Do
not make assumptions about the number of ready HDLC frames on
HDLC RX interrupt. This prevents libpri from becoming confused
when many HDLC frames arrive before the driver can service them
or a false RX interrupt is received. Patch provided by akolsmith.
Issue DAHDI-173.
2008-11-21 20:15 +0000 [r5360] Jason Parker <jparker@digium.com>
* drivers/dahdi/dahdi-base.c: Fix a think-o in numeric comparison.
Swap order to make it more clear. (closes issue #13813) Reported
by: ys
2008-11-21 04:42 +0000 [r5350-5355] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/dahdi-base.c: Convert some uses of sprintf to
snprintf in dahdi_proc_read in order to eliminate a buffer
overrun. Issue: DAHDI-209
* drivers/dahdi/wcb4xxp/base.c: Force the FIFO to reset when the
file handle is closed. Patch provided by akohlsmith. Issue:
DAHDI-178
2008-11-20 12:31 +0000 [r5340-5345] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/tor2.c: Make tor2 load properly. Seems to fix
#13487. Thanks to heyuqi for the testing.
* drivers/dahdi/xpp/README.Astribank: * Some extrra Zap->DAHDI (and
Dahdi->DAHDI) fixes in the Astribank README. * Some extra
asciidoc formatting fixes.
2008-11-19 21:25 +0000 [r5335] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/wcb4xxp/Makefile (added): support wcb4xxp build on
kernels that don't directly use Kbuild
2008-11-17 18:17 +0000 [r5321] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: - Fix for race condition of
encoder and decoder are allocated at the same time in the driver.
This would result in -EBUSY returns from the DAHDI_TC_ALLOCATE
ioctl. - Increase the length of the receive descriptor ring from
8 to 32 to reduce the probability of running out of receive
descriptors.
2008-11-17 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0-rc4 released.
2008-11-17 18:17 +0000 [r5321] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: - Fix for race condition of
encoder and decoder are allocated at the same time in the driver.
This would result in -EBUSY returns from the DAHDI_TC_ALLOCATE
ioctl. - Increase the length of the receive descriptor ring from
8 to 32 to reduce the probability of running out of receive
descriptors.
2008-11-17 18:01 +0000 [r5320] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/init_card_4_30, drivers/dahdi/xpp/card_pri.c:
xpp_pri: Fix T1 CRC initialization Clock synchronization when
sync is not from first port.
2008-11-17 17:44 +0000 [r5315] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcb4xxp/base.c, drivers/dahdi/wcb4xxp/wcb4xxp.h: A
fix for an issue with corruption on the D-Channels. Patch
provided by akohlsmith. Issue: DAHDI-173.
2008-11-16 19:30 +0000 [r5310] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/firmwares/USB_FW.hex: Fixed USB firmware that
caused some bad bioses to hang on boot. The BIOSes included in a
number of motherboards could hang from an Astribank firmware
newer than 1.2.20.1 / 1.4.5.1 . This was due to an some incorrect
USB information in the firmware. This firmware fixes it. Merged
Zaptel revisions 4580 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2008-11-13 22:10 +0000 [r5303] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcte12xp/base.c, drivers/dahdi/wctdm24xxp/base.c,
drivers/dahdi/voicebus.c, drivers/dahdi/voicebus.h: Make a
message about the host cacheline size being unsupported a debug
only message. The voicebus interface still works whether the
cacheline size is supported or not, but the message is confusing
to users.
2008-11-10 20:37 +0000 [r5288] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/init_card_2_30: xpp init_card_2_30: no need to
check environment in verify mode. Fixes #13832 in Zaptel.
2008-11-10 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0-rc3 released.
2008-11-10 19:48 +0000 [r5275] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcte12xp/base.c, drivers/dahdi/dahdi-base.c: - Do
not hold any locks while calling close_channel, which can result
in calls to the echocan modules which do not necesarrily assume
they are being called in atomic context. - Remove the bigzaplock
around calls to psuedo_alloc and pseudo_free. The structures
protected by this lock are already protected by the chan_lock in
these two cases. - Remove calls to in_atomic() that were
previously added to work around this, but did not cover all the
cases. Issue: DAHDI-195, DAHDI-170
2008-11-09 00:33 +0000 [r5269-5270] Sean Bright <sean.bright@gmail.com>
* drivers/dahdi/dahdi-base.c: We only use print_debug_writebuf when
CONFIG_DAHDI_NET or CONFIG_DAHDI_PPP are defined, so only define
it in those cases as well. Reported & Tested by: KP7 via
#asterisk-dev
* drivers/dahdi/dahdi-base.c: Add missing semi-colon. Reported &
Tested by: KP7 via #asterisk-dev
2008-11-05 23:45 +0000 [r5249-5257] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcb4xxp/base.c: Whitespace changes for the coding
standard.
* drivers/dahdi/wcb4xxp/base.c: rate limiting a diagnostic printk.
2008-11-05 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0-rc2 released.
2008-11-05 20:17 +0000 [r5230-5237] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Fix warning messages in order to
build on 2.6.27. (Closes issue #13757) Patch provided by tzafrir.
* drivers/dahdi/wcte12xp/vpmadt032.c,
drivers/dahdi/wctdm24xxp/GpakCust.c: Check the return value of
the down_interruptible call in order to quiet a warning. This
semaphore does not protect any host data structures, but only
accesses to the VPMADT032 module. The worse thing that could
happen is that the internal state of the VPM module is corrupted,
and then would only happen on module loading because otherwise
access because that is the only time this function is called in
the context of a user process. In this case, the module would
need to be reloaded again anyway. (Closes issue #13742) Reported
by smurfix
* drivers/dahdi/wcb4xxp/base.c: Remove the loopback module
parameter since it's not implemented yet.
* drivers/dahdi/wcb4xxp/base.c: Allow the wcb4xxp to take all the
signalling types.
2008-11-03 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux version 2.1.0-rc1 released.
2008-11-03 12:01 +0000 [r5203-5211] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/dahdi_dummy.c: Adjust DAHDI to the new timers
interface of kernel 2.6.28
* drivers/dahdi/dahdi-base.c: dahdi-base: hw_echocancel_off: return
0 if no hardware EC If the span has no hardware EC, return 0,
rather than a random uninitialized value (which was no harm, as
that return value is always ignored anyway).
* README: README: no need to generate Kbuild for OSLEC. No need to
create a Kbuild file. staging/echo has a Makefile that works fine
for us.
2008-10-31 22:23 +0000 [r5196] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcb4xxp/base.c: Changing the spantype to indicate
whether it is a TE or NT BRI port.
2008-10-31 21:33 +0000 [r5195] Matthew Fredrickson <creslin@digium.com>
* drivers/dahdi/wcb4xxp/base.c: Fix the FIFO configuration to use
the data from the EC correctly
2008-10-31 21:05 +0000 [r5190-5191] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/wcb4xxp/base.c: wcb4xxp: Set the spantype to "BRI"
(to show e.g. in dahdi_scan)
* drivers/dahdi/wcb4xxp/base.c: wcb4xxp: Claim to provide DACS for
dahdi_scan dahdi_scan can tell that a span is digital if its
first channel has DACS signalling capability. While this is
probably not supported by the current driver, it is also
harmless. Without this, dahdi_scan shows the spans of this card
as analog. (Done after consulting with sruffel)
2008-10-31 17:11 +0000 [r5186] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcb4xxp/base.c: Fix for a case where a span might
not always come back up after a disconnect. Patch provided by
akohlsmith. Issue: DAHDI-174
2008-10-30 19:16 +0000 [r5179-5180] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/dahdi-base.c: Use correct length for the, well,
dahdi transcoder device name.
* drivers/dahdi/dahdi-base.c: Use ! to hint udev about directory
separator. Udev knows how to convert a '!' in the device name to
a directory separator. Thus the name 'dahdi!ctl' will create the
device /dev/dahdi/ctl . We still keep older udev rules in this
release for compatibility, but eventually we'll only need them to
set permissions.
2008-10-29 16:48 +0000 [r5171-5175] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcb4xxp/base.c: The /proc/wcb4xxp should not be
created once for each card but rather once for all cards.
* drivers/dahdi/wcb4xxp/base.c: By default, do not create the
procfs entry for the wcb4xxp driver.
2008-10-29 15:09 +0000 [r5167] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/xbus-core.c: xpp: Increase the maximal size of
the command queue to 500 . Temporarily increase the maximal size
of the command queue from 300 to 500 as a workaround of an issue
at initialization time (mainly of BRI+FXS).
2008-10-28 21:59 +0000 [r5156-5163] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi: update to latest octasic_api tag with NULL
definition fix
* drivers/dahdi/tor2.c, drivers/dahdi/wcfxo.c,
drivers/dahdi/wcte12xp/base.c, drivers/dahdi/wcte12xp/GpakApi.c,
drivers/dahdi/pciradio.c, drivers/dahdi/wct4xxp/base.c,
drivers/dahdi/wcte12xp/vpmadt032.c,
drivers/dahdi/wctc4xxp/base.c, drivers/dahdi/dahdi_echocan_mg2.c,
drivers/dahdi/wctdm24xxp/base.c,
drivers/dahdi/wctdm24xxp/GpakApi.c,
drivers/dahdi/wcte12xp/vpmadt032.h,
drivers/dahdi/wctdm24xxp/GpakCust.c,
drivers/dahdi/wcb4xxp/base.c, drivers/dahdi/dahdi_dynamic_loc.c,
drivers/dahdi/dahdi_transcode.c, drivers/dahdi/wcte11xp.c,
drivers/dahdi/dahdi_dynamic.c, drivers/dahdi/dahdi_dynamic_eth.c,
drivers/dahdi/wct1xxp.c, drivers/dahdi/wctdm.c,
drivers/dahdi/wcb4xxp, drivers/dahdi/voicebus.c,
drivers/dahdi/dahdi-base.c, drivers/dahdi/dahdi_dummy.c: fix a
large number of warnings found by sparse, the kernel code sanity
checking tool. some of these fixes are non-optimal (casting
'unsigned long' to '__user void *'), but are unavoidable in many
cases. started from tzafrir's patch, did most of the work myself.
(closes issue #13763) Reported by: tzafrir Patches:
sparse_fixes_1.diff uploaded by tzafrir (license 46)
* README: various cleanups, primarily proper capitalization
2008-10-28 18:26 +0000 [r5148-5150] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcb4xxp/Kbuild (added), drivers/dahdi/Kbuild,
drivers/dahdi/wcb4xxp/base.c (added), drivers/dahdi/wcb4xxp
(added), drivers/dahdi/wcb4xxp/wcb4xxp.h (added), README: Adding
the wcb4xxp driver, a native dahdi driver for the B410P module.
2008-10-27 19:27 +0000 [r5127-5138] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README: dahdi linux README: Clarify OSLEC EC build procedure.
* drivers/dahdi/xpp/card_fxo.c: xpp fxo: Add sysfs battery
attribute.
* drivers/dahdi/xpp/xpp_dahdi.c, drivers/dahdi/xpp/xbus-core.c,
drivers/dahdi/xpp/xbus-core.h: xpp: remove an unused manual
reference count field.
* drivers/dahdi/xpp/xpp_dahdi.c, drivers/dahdi/xpp/xbus-sysfs.c:
xpp: Make some definitions static, as per sparse. Fixes the xpp
warnings of #13763 (except some false alarms).
* drivers/dahdi/xpp/card_pri.c, drivers/dahdi/xpp/card_bri.c,
drivers/dahdi/xpp/card_fxo.c, drivers/dahdi/xpp/xbus-sysfs.c,
drivers/dahdi/xpp/card_fxs.c, drivers/dahdi/xpp/xbus-core.h,
drivers/dahdi/xpp/xdefs.h: Fix xpp compile problems on kernel <
2.6.16 Support for kernels that use the older hotplug support
rather than the newer uevent. Fixes the xpp issue from #13427.
* include/dahdi/kernel.h: kernel.h: cleanup DAHDI_FLAG_* defines,
no functional change. Define the DAHDI_FLAG_* using the
DAHDI_FLAGBIT_* enum values.
2008-10-22 18:49 +0000 [r5121-5124] Jason Parker <jparker@digium.com>
* build_tools/genudevrules: Need to make sure we check for udevadm
in addition to udevinfo. Some silly person (or people) decided
that it wasn't useful to have in their distro... *cough*
* drivers/dahdi/wctdm.c: Fix building on big endian machines.
(closes issue #13754) Reported by: shrift Patches:
wctdm-powerpc.patch uploaded by irroot (license 52) Tested by:
shrift
2008-10-22 11:44 +0000 [r5105-5118] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/wct1xxp.c: wct1xxp: fix error handling at device
startup. And also give more useful error messages if things go
bad. (closes issue #13607) Patches: wct1xxp_pci.diff uploaded by
tzafrir (license 46) Tested by: klaus3000
* drivers/dahdi/xpp/init_card_1_30: xpp FXS init script: Do use
high-pass filter.
* drivers/dahdi/Kbuild, drivers/dahdi/dahdi_echocan_oslec.c
(added), README: An experimental OSLEC echocan module.
* /: dahdi-trunk: ignore the generated README.html .
* README: dahdi-linux README: better place for build requirements.
(We'll have to put a content there one of these days)
* README: Fix headers numbering.
2008-10-16 17:40 +0000 [r5097] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/xpp.rules, drivers/dahdi/xpp/xpp_usb.c,
drivers/dahdi/xpp/card_pri.c, drivers/dahdi/xpp/card_fxo.c,
drivers/dahdi/xpp/xframe_queue.c, drivers/dahdi/xpp/xbus-sysfs.c,
drivers/dahdi/xpp/Kbuild, drivers/dahdi/xpp/card_fxs.c,
drivers/dahdi/xpp/card_global.c, drivers/dahdi/xpp/xproto.c,
drivers/dahdi/xpp/xframe_queue.h,
drivers/dahdi/xpp/astribank_hook.sample (added),
drivers/dahdi/xpp/init_card_1_30, drivers/dahdi/xpp/xbus-pcm.c,
drivers/dahdi/xpp/init_card_2_30,
drivers/dahdi/xpp/card_global.h,
drivers/dahdi/xpp/init_card_3_30, drivers/dahdi/xpp/xproto.h,
drivers/dahdi/xpp/xpp_dahdi.c, drivers/dahdi/xpp/xpd.h,
drivers/dahdi/xpp/init_card_4_30, drivers/dahdi/xpp/xpp_dahdi.h,
drivers/dahdi/xpp/card_bri.c, drivers/dahdi/xpp/mmapdrv.c,
drivers/dahdi/xpp/xbus-core.c, drivers/dahdi/xpp/xbus-core.h,
drivers/dahdi/xpp/xdefs.h: xpp: start migration from procfs to
sysfs. * Sysfs representation for XPDs:
/sys/bus/xpds/devices/<bus>:<unit>:<subunit> * Astribanks sysfs
directories now include the XPDs as subdirectories: e.g.
/sys/bus/astribanks/devices/xbus-00/00:3:0 * procfs control
interface deprecated: conditioned by OLD_PROC (defaults to off).
Control functionality moved to sysfs: * xbus attributes: cls
connector label status timing waitfor_xpds xbus_state * XPDs can
have driver-specific attributes. Common attriubtes: blink
chipregs span * PRI-specific attributes: pri_clocking pri_dchan
pri_cas pri_alarms pri_layer1 pri_localloop pri_protocol * The
Astribank attribute "xbus_state" is read/write. Reading it shows
the current state of the Astribank. Writing "start" or "stop"
allows a software equivalent of connect or disconnect
respectively. * When an Astribank is ready it sends an "online"
event. Whenever its not ready (e.g. at the time of disconnect) it
sends an "offline" event. Use astribank_hook.sample to handle
those.
2008-10-14 22:11 +0000 [r5090] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcte12xp/base.c: If the vpmadt032 firmware needs to
be reloaded, make sure we use the same slot in the ifaces array.
2008-10-10 22:38 +0000 [r5084] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/dahdi_transcode.c, drivers/dahdi/wctc4xxp/base.c: -
Ensure that the source format is considered when selecting a
transcoder. - When a command is to be retried, turn off the
TX_COMPLETE flag before resubmitting it to the hardware. This
should elimate some of the warnings printed to the kernel log in
the wctc4xxp_transmit_cmd function.
2008-10-09 02:54 +0000 [r5068] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi-base.c: a micro-optimization found while
creslin and i spent four or five hours tracking down a very
complex problem
2008-10-06 20:52 +0000 [r5064] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi-base.c: use the same logic here as elsewhere
for releasing echocan module references
2008-10-06 17:48 +0000 [r5060] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Embed room for the complete packet
to the DTE in the transcoder buffer structure. Simplifies
alignment management at the cost of a little wasted memory, but
the end results is that operation is more reliable on more
systems.
2008-10-06 16:55 +0000 [r5056] Sean Bright <sean.bright@gmail.com>
* drivers/dahdi/dahdi-base.c: Fix a few compile errors that only
show up when CONFIG_DAHDI_PPP is defined. (closes issue #13608)
Reported by: Nik Soggia Fix suggested by: Nik Soggia Tested by:
seanbright
2008-10-03 20:32 +0000 [r5046-5051] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/dahdi-base.c: Fix building with CONFIG_DAHDI_NET in
kernel 2.6.22 The leftovers of issues #13542 (which was mostly
resolved in previous committ. This closes it.
* drivers/dahdi/dahdi-base.c: Fix building with CONFIG_DAHDI_NET .
It builds, but will it run? Patch dahdi-base.c.hdlc.patch by
biohumanoid that fixes some aparant copy&paste errors.
2008-10-03 20:09 +0000 [r5045] Sean Bright <sean.bright@gmail.com>
* drivers/dahdi/dahdi-base.c, drivers/dahdi/dahdi_config.h: Fix
some compilation problems that show up when CONFIG_DAHDI_DEBUG is
defined.
2008-10-03 15:39 +0000 [r5021-5034] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: There are two possible valid
statues when booting the TC400M.
* drivers/dahdi/wctc4xxp/base.c: Keep hold of the channel lock when
setting the data_ready flag for the channel after writing to the
receive queue. Prevents a warning that data was on the recieve
queue but the data ready flag was not set. Issue: DAHDI-42
* drivers/dahdi/wctc4xxp/base.c: wctc4xxp_cleanup_channel_private
needs a pointer to the zt_transcoder_channel and not just the
private portion now in order to manage the data ready flag state.
* drivers/dahdi/wctc4xxp/base.c: Mark that there is not any data
waiting whenever we cleanup the private channel structures.
Issue: DAHDI-42
* drivers/dahdi/dahdi-base.c: DAHDI should always make data
received from the PSTN available to user mode immediately. Only
allow the transmit buffering policy to be changed in order to
reduce the chance of underruns to the PSTN.
2008-09-30 20:29 +0000 [r5017] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Removing references to setup_timer
in pre 2.6.18 kernels.
2008-09-29 Shaun Ruffell <sruffell@digium.com>
* dahdi-linux 2.0.0 released.
2008-09-28 17:29 +0000 [r5002-5007] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctdm.c: Improve reliablity of UK caller ID for the
TDM400P by not allowing the ringdebounce to be decremented when
it is at 0 already. Related to issue #12531. Reported mattbrown,
fix suggested by benbrown.
* drivers/dahdi/wcte12xp/base.c: Fixed type of flags parameter to
spin_lock_irqsave functions. Fixes compilation issues on
platforms where int and long do not have the same size. Closes
Issues #0013575. Reported by Ulmo.
* drivers/dahdi/dahdi_echocan_kb1.c,
drivers/dahdi/dahdi_echocan_mg2.c, drivers/dahdi/dahdi-base.c,
drivers/dahdi/dahdi_echocan_sec.c,
drivers/dahdi/dahdi_echocan_sec2.c: Fixes failure of modular echo
cancelers in DAHDI. Reported by lots of people, fix suggested by
mattf.
2008-09-26 03:20 +0000 [r4990] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/dahdi-base.c: The channel master should not be set
to 0, but rather should be 'cleared' by setting the channel to be
it's own master. (related to issue 11611)
2008-09-25 16:50 +0000 [r4979-4986] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/firmwares/FPGA_1151.hex: XPP firmware: Only
send out CAS D-channel messages when in CAS mode.
* drivers/dahdi/xpp/init_card_3_30,
drivers/dahdi/xpp/card_global.c,
drivers/dahdi/xpp/init_card_1_30,
drivers/dahdi/xpp/init_card_2_30: Fix display of indirect
registers and streamline their setting. * This commit fixes
display of indirect registers through the chipregs (formly
"slics") procfs file. Only the low byte was displayed. * It also
deprecates previous {RW}S in favour of {RW}I. The prevois style
is still allowed but deprecated, and thus previous scripts will
still work.
* drivers/dahdi/xpp/card_fxo.c: XPP FXO: Add caller-id workaround
for ESTI-DTMF (for #9096) * Also rename the CID_STYLE_* constants
to formal names.
2008-09-24 06:15 +0000 [r4971] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Adding back in the mode module
parameter for the wctc4xxp driver. This is primarily used to
increase the number of channels available when only transcoding
to/from g729 by setting it to 'g729'.
2008-09-18 21:23 +0000 [r4957] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcte12xp/base.c: Adding a needed header for the
in_atomic call.
2008-09-18 21:23 +0000 [r4956-4957] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wcte12xp/base.c, drivers/dahdi/dahdi-base.c:
close_channel is called with a spin_lock held, which means that
GFP_KERNEL can not be used for the memory allocations down that
call path. Have allocations in this call path check if they are
in atomic context and use the appropriate flags. Issue: DAHDI-195
2008-09-17 19:07 +0000 [r4917-4930] Shaun Ruffell <sruffell@digium.com>
* README: Just moved a note into it's own paragraph so that
asciidoc can make the appropriate callout.
* README: Added a note about installing support for the B410P in
the installation section of the README file.
* drivers/dahdi/dahdi-base.c: Turn off reference counting on the
echo canceller modules in order to prevent misconfigurations from
preventing the drivers from unloading. NOTE: This is only a
temporary workaround, since it also means that the echocanceller
can be unloaded by an administrator while in use, which would
most likely result in a kernel oops. Related to issue #13504.
2008-09-15 20:49 +0000 [r4905-4909] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctdm.c, drivers/dahdi/dahdi-base.c: Edit some
comments and error strings. Issue: DAHDI-13
* drivers/dahdi/wcte12xp/vpmadt032.c,
drivers/dahdi/wctdm24xxp/base.c: Fixed two typos.
2008-09-11 23:00 +0000 [r4894-4900] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/dahdi-base.c: Fix a type used in nethdlc mode, as
pointed out in #13427 .
* drivers/dahdi/xpp/xpp.rules (added), Makefile: Move udev rules
xpp.rules from dahdi-tools to dahdi-linux .
2008-09-08 Russell Bryant <russell@digium.com>
* dahdi-linux version 2.0.0-rc4 released.
2008-09-06 20:27 +0000 [r4868-4870] Matthew Fredrickson <creslin@digium.com>
* drivers/dahdi/dahdi-base.c: Fix buglet in #define for 2.6.9
* drivers/dahdi/wct4xxp/base.c: Revert unnecessary default hardhdlc
mode from 56K to 64K
* drivers/dahdi/wct4xxp/base.c, drivers/dahdi/dahdi-base.c: Fix
class_simple on old 2.6.9 kernels
2008-09-04 21:42 +0000 [r4865] Matthew Fredrickson <creslin@digium.com>
* include/dahdi/fasthdlc.h: Some picky switches require the LSB to
be 1 for 56k links
2008-09-04 21:29 +0000 [r4861-4864] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wct4xxp/base.c: Remove a couple of 'magic numbers'
to make it clear all the ports of the framer should be
configured.
* drivers/dahdi/wct4xxp/base.c: Fixes an issue where the dual-span
cards are not properly configured which can cause data loss. Fix
provided by opticron and possibly related to issue #0013393.
2008-08-29 21:46 +0000 [r4856] Matthew Fredrickson <creslin@digium.com>
* drivers/dahdi/dahdi-base.c: Remove useless kzalloc
2008-08-27 17:12 +0000 [r4848-4849] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi_dummy.c: remove some more ztdummy references
* drivers/dahdi/wcfxo.c, drivers/dahdi/wcte12xp/base.c,
drivers/dahdi/wct4xxp/base.c, drivers/dahdi/wcte11xp.c,
drivers/dahdi/wct1xxp.c, drivers/dahdi/wctc4xxp/base.c,
drivers/dahdi/wctdm.c, drivers/dahdi/wctdm24xxp/base.c, README: a
bit of attribution cleanup
2008-08-27 16:48 +0000 [r4847] Jason Parker <jparker@digium.com>
* Makefile: Set a list of headers to install/uninstall, so the
lists don't get out of sync (note the previously missing
fasthdlc.h in the uninstall-include target)
2008-08-26 13:04 +0000 [r4829-4841] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: "docs" target to generate documentation. Generate docs
with asciidoc.
* drivers/dahdi/xpp/README.Astribank: Fix asciidoc.
* Makefile: Don't try to clean modules if there's no kernel source
available (like in Zaptel).
* README: Reverting unwanted changes in the README (from r4830)
Also fixed ZT references in the ABI compatibility section. The
numerical ioctl values need to be recalculated, though.
* README: Make the README file more relevant to modules.
* drivers/dahdi/Kbuild, Makefile: Support MODULES_EXTRA and
SUBDIRS_EXTRA to add extra modules from the make command line.
2008-08-25 17:50 +0000 [r4828] Jason Parker <jparker@digium.com>
* Makefile: Make sure we remove headers that we installed in
install-include
2008-08-25 14:54 +0000 [r4823] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Remove this warning, which could
occur if the driver is loaded on a system without a wctc4xxp, and
then subsequently unloaded.
2008-08-24 05:53 +0000 [r4817] Matthew Fredrickson <creslin@digium.com>
* include/dahdi/user.h, include/dahdi/kernel.h,
drivers/dahdi/dahdi-base.c, include/dahdi/fasthdlc.h: Add support
for 56 KB HDLC as well as selectable rate via ioctl
2008-08-20 22:20 +0000 [r4805] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi_dynamic.c: use the new separate allocation
method for channel structures here too replace "ZTD" references
in channel/span names with "DYN" (closes issue #13302) Reported
by: KNK
2008-08-20 Kevin P. Fleming <kpfleming@digium.com>
* dahdi-linux version 2.0.0-rc3 released.
2008-08-20 22:20 +0000 [r4801-4805] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi_dynamic.c: use the new separate allocation
method for channel structures here too replace "ZTD" references
in channel/span names with "DYN" (closes issue #13302) Reported
by: KNK
* drivers/dahdi/dahdi_dynamic.c: update code to match version in
Zaptel
* drivers/dahdi/xpp/xpd.h, drivers/dahdi/wctdm24xxp/wctdm24xxp.h,
drivers/dahdi/wcte12xp/vpmadt032.c,
drivers/dahdi/wctdm24xxp/base.c,
drivers/dahdi/wctdm24xxp/GpakApi.c, drivers/dahdi/dahdi-base.c,
drivers/dahdi/wctdm24xxp/GpakCust.c: improve compatibility with
2.6.26 and 2.6.27 kernels (closes issue #13253) Reported by:
raiden Patches: zap-dev.patch uploaded by smurfix on issue #13277
(license 547) zap-sema.patch uploaded by smurfix on issue #13277
(license 547)
2008-08-20 19:31 +0000 [r4798] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Change to support both 5.3kbps and
6.3kbps bit rates when using the G723.1 codec.
2008-08-19 20:49 +0000 [r4795] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/firmware/Makefile: port over improvements to
firmware Makefile from Zaptel
2008-08-19 20:25 +0000 [r4791-4794] Shaun Ruffell <sruffell@digium.com>
* drivers/dahdi/wctc4xxp/base.c: Fixed calculation of the
timestamp.
* include/dahdi/kernel.h, drivers/dahdi/dahdi_transcode.c,
drivers/dahdi/wctc4xxp/base.c: Couple of fixes for the
transcoder: - In dahdi_transcode.c, Embed the identifiation
number, assigned sequentially when the transcoders are
registered, in the transcoder structure. This allows
DAHDI_TC_GETINFO to work as expected even though the transcoders
are rotated on the list in order to spread the load. - In
wctc4xxp, fix bug where all transcoders are named tc400b0.
2008-08-18 23:24 +0000 [r4788] Kevin P. Fleming <kpfleming@digium.com>
* Makefile: minor cleanups, and allow DAHDI_BUILD_ALL to be
overriden on the command line
2008-08-14 21:37 +0000 [r4776-4784] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/.version, drivers/dahdi/xpp/Changelog_xpp: Set
xpp version to 6056 and reset XPP changelog.
* drivers/dahdi/xpp/firmwares/Makefile (added), Makefile: Also
install Astribank firmwares and init scripts to /usr/share/dahdi
.
* drivers/dahdi/xpp/card_fxo.c: xpp: FXO: display signed voltage
values (from xpp r6055) This is only an issue with the displayed
value. In case you wondered why you have battery voltage of more
than 220V.
2008-08-14 01:09 +0000 [r4773] Kevin P. Fleming <kpfleming@digium.com>
* drivers/dahdi/dahdi_transcode.c: remove devfs support, and use
consistent include file path
2008-08-13 21:04 +0000 [r4770] Doug Bailey <dbailey@digium.com>
* drivers/dahdi/wctdm24xxp/wctdm24xxp.h,
drivers/dahdi/wctdm24xxp/base.c: import the neon mwi detection
2008-08-11 16:22 +0000 [r4758-4761] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* drivers/dahdi/xpp/card_pri.c, drivers/dahdi/xpp/card_bri.c,
drivers/dahdi/xpp/firmwares/FPGA_1151.hex,
drivers/dahdi/xpp/xbus-core.c, drivers/dahdi/xpp/card_global.c,
drivers/dahdi/xpp/xbus-pcm.c: xpp: CAS/E1 support in the PRI
module, and minor fixes. * Add support for CAS in the PRI module.
Use firmware rev. 5975. * Debugging parameter pcmtx_chan now
accepts a dahdi channel number. * Do initialize a reserved
protocol field (card_global). * The name DAHDI as used in
proc/xpp/sync has 5 (not 6) letters. * Fix DTMF "channel leak"
regression in the FXS module.
* drivers/dahdi/xpp/card_fxo.c: xpp: fxo: Fix support for
CID_STYLE_PASS_ALWAYS
* drivers/dahdi/xpp/Kbuild: A more robust test for bri_dchan
support.
* drivers/dahdi/xpp/xpd.h, drivers/dahdi/xpp/xpp_dahdi.c: xpp_blink
is a bit mask of ports, and not boolean anymore.
2008-08-08 Kevin P. Fleming <kpfleming@digium.com>
* dahdi-linux version 2.0.0-rc2 released.
2008-08-07 20:21 +0000 [r4742] Shaun Ruffell <sruffell@digium.com>:
* drivers/dahdi/dahdi_transcode.c: Make sure types are same size on
64-bit machines.
2008-08-06 Kevin P. Fleming <kpfleming@digium.com>
* dahdi-linux version 2.0.0-rc1 released.
distrib
>
Mandriva
>
2010.0
>
i586
>
media
>
contrib-release
>
by-pkgid
>
bc78e764831f71eef4bb6ca5b1887e1c
>
files
>
19
