From: John W. Linville <linville@redhat.com> Date: Thu, 28 Aug 2008 13:59:00 -0400 Subject: [wireless] iwlwifi: post-2.6.27-rc3 to support iwl5x00 Message-id: 20080828175853.GA30048@redhat.com O-Subject: [RHEL5 PATCH] iwlwifi: update from post-2.6.27-rc3 to support iwl5x00 Bugzilla: 438388 RH-Acked-by: David Miller <davem@redhat.com> Yet another monster patch...this one updates the iwlwifi drivers to match what was released in 2.6.27-rc3 plus some even later patches (the ones from the current upstream process discussion on-going in linux-wireless for anyone watching that). This also renames the iwl4965 driver to iwlagn (MODULE_ALIAS added) and adds support for the iwl5x00 adapters. BZ438388 _Lightly_ tested by me and Jane Lv from Intel, with good results so far. I'll keep an eye on it and post fixes or an updated patch as necessary. diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index de4d56d..230b26d 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -3,7 +3,7 @@ config IWLWIFI config IWLCORE tristate "Intel Wireless Wifi Core" - depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL + depends on PCI && MAC80211 && NET_RADIO && EXPERIMENTAL select IWLWIFI select MAC80211_LEDS if IWLWIFI_LEDS select LEDS_CLASS if IWLWIFI_LEDS @@ -13,18 +13,49 @@ config IWLWIFI_LEDS default n config IWLWIFI_RFKILL - boolean "IWLWIFI RF kill support" + boolean "Iwlwifi RF kill support" depends on IWLCORE -config IWL4965 - tristate "Intel Wireless WiFi 4965AGN" +config IWLWIFI_DEBUG + bool "Enable full debugging output in iwlagn driver" + depends on IWLCORE + ---help--- + This option will enable debug tracing output for the iwlwifi drivers + + This will result in the kernel module being ~100k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/class/net/wlan0/device/debug_level + + This entry will only exist if this option is enabled. + + To set a value, simply echo an 8-byte hex value to the same file: + + % echo 0x43fff > /sys/class/net/wlan0/device/debug_level + + You can find the list of debug mask values in: + drivers/net/wireless/iwlwifi/iwl-debug.h + + If this is your first time using this driver, you should say Y here + as the debug information can assist others in helping you resolve + any problems you may encounter. + +config IWLWIFI_DEBUGFS + bool "Iwlwifi debugfs support" + depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS + ---help--- + Enable creation of debugfs files for the iwlwifi drivers. + +config IWLAGN + tristate "Intel Wireless WiFi Next Gen AGN" depends on PCI && MAC80211 && NET_RADIO && EXPERIMENTAL select FW_LOADER select IWLCORE ---help--- Select to build the driver supporting the: - Intel Wireless WiFi Link 4965AGN + Intel Wireless WiFi Link Next-Gen AGN This driver uses the kernel's mac80211 subsystem. @@ -41,68 +72,33 @@ config IWL4965 If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read <file:Documentation/kbuild/modules.txt>. The - module will be called iwl4965.ko. + module will be called iwlagn.ko. -config IWL4965_HT - bool "Enable 802.11n HT features in iwl4965 driver" - depends on EXPERIMENTAL - depends on IWL4965 +config IWLAGN_SPECTRUM_MEASUREMENT + bool "Enable Spectrum Measurement in iwlagn driver" + depends on IWLAGN ---help--- - This option enables IEEE 802.11n High Throughput features - for the iwl4965 driver. + This option will enable spectrum measurement for the iwlagn driver. -config IWL4965_LEDS - bool "Enable LEDS features in iwl4965 driver" - depends on IWL4965 +config IWLAGN_LEDS + bool "Enable LEDS features in iwlagn driver" + depends on IWLAGN select IWLWIFI_LEDS ---help--- - This option enables LEDS for the iwlwifi drivers - + This option enables LEDS for the iwlagn drivers -config IWL4965_SPECTRUM_MEASUREMENT - bool "Enable Spectrum Measurement in iwl4965 driver" - depends on IWL4965 - ---help--- - This option will enable spectrum measurement for the iwl4965 driver. -config IWL4965_SENSITIVITY - bool "Enable Sensitivity Calibration in iwl4965 driver" - depends on IWL4965 +config IWL4965 + bool "Intel Wireless WiFi 4965AGN" + depends on IWLAGN ---help--- - This option will enable sensitivity calibration for the iwl4965 - driver. + This option enables support for Intel Wireless WiFi Link 4965AGN -config IWLWIFI_DEBUG - bool "Enable full debugging output in iwl4965 driver" - depends on IWL4965 +config IWL5000 + bool "Intel Wireless WiFi 5000AGN" + depends on IWLAGN ---help--- - This option will enable debug tracing output for the iwl4965 - driver. - - This will result in the kernel module being ~100k larger. You can - control which debug output is sent to the kernel log by setting the - value in - - /sys/bus/pci/drivers/${DRIVER}/debug_level - - This entry will only exist if this option is enabled. - - To set a value, simply echo an 8-byte hex value to the same file: - - % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level - - You can find the list of debug mask values in: - drivers/net/wireless/iwlwifi/iwl-4965-debug.h - - If this is your first time using this driver, you should say Y here - as the debug information can assist others in helping you resolve - any problems you may encounter. - -config IWLWIFI_DEBUGFS - bool "Iwlwifi debugfs support" - depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS - ---help--- - Enable creation of debugfs files for the iwlwifi drivers. + This option enables support for Intel Wireless WiFi Link 5000AGN Family config IWL3945 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection" @@ -133,6 +129,10 @@ config IWL3945 say M here and read <file:Documentation/kbuild/modules.txt>. The module will be called iwl3945.ko. +config IWL3945_RFKILL + bool "Enable RF kill support in iwl3945 drivers" + depends on IWL3945 + config IWL3945_SPECTRUM_MEASUREMENT bool "Enable Spectrum Measurement in iwl3945 drivers" depends on IWL3945 diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index ec6187b..47aa28f 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -1,13 +1,19 @@ obj-$(CONFIG_IWLCORE) += iwlcore.o -iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o +iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o +iwlcore-objs += iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o +iwlcore-objs += iwl-scan.o iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o +obj-$(CONFIG_IWLAGN) += iwlagn.o +iwlagn-objs := iwl-agn.o iwl-agn-rs.o + +iwlagn-$(CONFIG_IWL4965) += iwl-4965.o +iwlagn-$(CONFIG_IWL5000) += iwl-5000.o + obj-$(CONFIG_IWL3945) += iwl3945.o iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o -obj-$(CONFIG_IWL4965) += iwl4965.o -iwl4965-objs := iwl4965-base.o iwl-4965.o iwl-4965-rs.o iwl-sta.o diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h index ad612a8..644bd9e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h @@ -126,7 +126,7 @@ enum { EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ - EEPROM_CHANNEL_NARROW = (1 << 6), /* 10 MHz channel (not used) */ + /* Bit 6 Reserved (was Narrow Channel) */ EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ }; @@ -289,17 +289,6 @@ struct iwl3945_eeprom { #define PCI_REG_WUM8 0x0E8 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000) -/* SCD (3945 Tx Frame Scheduler) */ -#define SCD_BASE (CSR_BASE + 0x2E00) - -#define SCD_MODE_REG (SCD_BASE + 0x000) -#define SCD_ARASTAT_REG (SCD_BASE + 0x004) -#define SCD_TXFACT_REG (SCD_BASE + 0x010) -#define SCD_TXF4MF_REG (SCD_BASE + 0x014) -#define SCD_TXF5MF_REG (SCD_BASE + 0x020) -#define SCD_SBYP_MODE_1_REG (SCD_BASE + 0x02C) -#define SCD_SBYP_MODE_2_REG (SCD_BASE + 0x030) - /*=== FH (data Flow Handler) ===*/ #define FH_BASE (0x800) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c index 8b1528e..d333696 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c @@ -42,14 +42,11 @@ #include "iwl-3945.h" #include "iwl-helpers.h" -#define IWL_1MB_RATE (128 * 1024) -#define IWL_LED_THRESHOLD (16) -#define IWL_MAX_BLINK_TBL (10) static const struct { u16 brightness; u8 on_time; - u8 of_time; + u8 off_time; } blink_tbl[] = { {300, 25, 25}, @@ -61,9 +58,16 @@ static const struct { {15, 95, 95 }, {10, 110, 110}, {5, 130, 130}, - {0, 167, 167} + {0, 167, 167}, + /*SOLID_ON*/ + {-1, IWL_LED_SOLID, 0} }; +#define IWL_1MB_RATE (128 * 1024) +#define IWL_LED_THRESHOLD (16) +#define IWL_MAX_BLINK_TBL (ARRAY_SIZE(blink_tbl) - 1) /*Exclude Solid on*/ +#define IWL_SOLID_BLINK_IDX (ARRAY_SIZE(blink_tbl) - 1) + static int iwl3945_led_cmd_callback(struct iwl3945_priv *priv, struct iwl3945_cmd *cmd, struct sk_buff *skb) @@ -71,6 +75,10 @@ static int iwl3945_led_cmd_callback(struct iwl3945_priv *priv, return 1; } +static inline int iwl3945_brightness_to_idx(enum led_brightness brightness) +{ + return fls(0x000000FF & (u32)brightness); +} /* Send led command */ static int iwl_send_led_cmd(struct iwl3945_priv *priv, @@ -81,49 +89,45 @@ static int iwl_send_led_cmd(struct iwl3945_priv *priv, .len = sizeof(struct iwl3945_led_cmd), .data = led_cmd, .meta.flags = CMD_ASYNC, - .meta.u.callback = iwl3945_led_cmd_callback + .meta.u.callback = iwl3945_led_cmd_callback, }; return iwl3945_send_cmd(priv, &cmd); } + /* Set led on command */ -static int iwl3945_led_on(struct iwl3945_priv *priv, int led_id) +static int iwl3945_led_pattern(struct iwl3945_priv *priv, int led_id, + unsigned int idx) { struct iwl3945_led_cmd led_cmd = { .id = led_id, - .on = IWL_LED_SOLID, - .off = 0, .interval = IWL_DEF_LED_INTRVL }; + + BUG_ON(idx > IWL_MAX_BLINK_TBL); + + led_cmd.on = blink_tbl[idx].on_time; + led_cmd.off = blink_tbl[idx].off_time; + return iwl_send_led_cmd(priv, &led_cmd); } + +#if 1 /* Set led on command */ -static int iwl3945_led_pattern(struct iwl3945_priv *priv, int led_id, - enum led_brightness brightness) +static int iwl3945_led_on(struct iwl3945_priv *priv, int led_id) { struct iwl3945_led_cmd led_cmd = { .id = led_id, - .on = brightness, - .off = brightness, + .on = IWL_LED_SOLID, + .off = 0, .interval = IWL_DEF_LED_INTRVL }; - if (brightness == LED_FULL) { - led_cmd.on = IWL_LED_SOLID; - led_cmd.off = 0; - } return iwl_send_led_cmd(priv, &led_cmd); } -/* Set led register off */ -static int iwl3945_led_on_reg(struct iwl3945_priv *priv, int led_id) -{ - IWL_DEBUG_LED("led on %d\n", led_id); - return iwl3945_led_on(priv, led_id); -} - /* Set led off command */ static int iwl3945_led_off(struct iwl3945_priv *priv, int led_id) { @@ -136,27 +140,7 @@ static int iwl3945_led_off(struct iwl3945_priv *priv, int led_id) IWL_DEBUG_LED("led off %d\n", led_id); return iwl_send_led_cmd(priv, &led_cmd); } - -/* Set led register off */ -static int iwl3945_led_off_reg(struct iwl3945_priv *priv, int led_id) -{ - iwl3945_led_off(priv, led_id); - return 0; -} - -/* Set led blink command */ -static int iwl3945_led_not_solid(struct iwl3945_priv *priv, int led_id, - u8 brightness) -{ - struct iwl3945_led_cmd led_cmd = { - .id = led_id, - .on = brightness, - .off = brightness, - .interval = IWL_DEF_LED_INTRVL - }; - - return iwl_send_led_cmd(priv, &led_cmd); -} +#endif /* @@ -206,8 +190,10 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev, led->led_off(priv, IWL_LED_LINK); break; default: - if (led->led_pattern) - led->led_pattern(priv, IWL_LED_LINK, brightness); + if (led->led_pattern) { + int idx = iwl3945_brightness_to_idx(brightness); + led->led_pattern(priv, IWL_LED_LINK, idx); + } break; } } @@ -220,12 +206,12 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev, static int iwl3945_led_register_led(struct iwl3945_priv *priv, struct iwl3945_led *led, enum led_type type, u8 set_led, - const char *name, char *trigger) + char *trigger) { struct device *device = wiphy_dev(priv->hw->wiphy); int ret; - led->led_dev.name = name; + led->led_dev.name = led->name; led->led_dev.brightness_set = iwl3945_led_brightness_set; led->led_dev.default_trigger = trigger; @@ -252,24 +238,20 @@ static int iwl3945_led_register_led(struct iwl3945_priv *priv, static inline u8 get_blink_rate(struct iwl3945_priv *priv) { int index; - u8 blink_rate; - - if (priv->rxtxpackets < IWL_LED_THRESHOLD) - index = 10; - else { - for (index = 0; index < IWL_MAX_BLINK_TBL; index++) { - if (priv->rxtxpackets > (blink_tbl[index].brightness * - IWL_1MB_RATE)) - break; - } - } - /* if 0 frame is transfered */ - if ((index == IWL_MAX_BLINK_TBL) || !priv->allow_blinking) - blink_rate = IWL_LED_SOLID; - else - blink_rate = blink_tbl[index].on_time; + u64 current_tpt = priv->rxtxpackets; + s64 tpt = current_tpt - priv->led_tpt; + + if (tpt < 0) + tpt = -tpt; + priv->led_tpt = current_tpt; - return blink_rate; + if (!priv->allow_blinking) + index = IWL_MAX_BLINK_TBL; + else + for (index = 0; index < IWL_MAX_BLINK_TBL; index++) + if (tpt > (blink_tbl[index].brightness * IWL_1MB_RATE)) + break; + return index; } static inline int is_rf_kill(struct iwl3945_priv *priv) @@ -285,7 +267,7 @@ static inline int is_rf_kill(struct iwl3945_priv *priv) */ void iwl3945_led_background(struct iwl3945_priv *priv) { - u8 blink_rate; + u8 blink_idx; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { priv->last_blink_time = 0; @@ -298,9 +280,10 @@ void iwl3945_led_background(struct iwl3945_priv *priv) if (!priv->allow_blinking) { priv->last_blink_time = 0; - if (priv->last_blink_rate != IWL_LED_SOLID) { - priv->last_blink_rate = IWL_LED_SOLID; - iwl3945_led_on(priv, IWL_LED_LINK); + if (priv->last_blink_rate != IWL_SOLID_BLINK_IDX) { + priv->last_blink_rate = IWL_SOLID_BLINK_IDX; + iwl3945_led_pattern(priv, IWL_LED_LINK, + IWL_SOLID_BLINK_IDX); } return; } @@ -309,21 +292,14 @@ void iwl3945_led_background(struct iwl3945_priv *priv) msecs_to_jiffies(1000))) return; - blink_rate = get_blink_rate(priv); + blink_idx = get_blink_rate(priv); /* call only if blink rate change */ - if (blink_rate != priv->last_blink_rate) { - if (blink_rate != IWL_LED_SOLID) { - priv->last_blink_time = jiffies + - msecs_to_jiffies(1000); - iwl3945_led_not_solid(priv, IWL_LED_LINK, blink_rate); - } else { - priv->last_blink_time = 0; - iwl3945_led_on(priv, IWL_LED_LINK); - } - } + if (blink_idx != priv->last_blink_rate) + iwl3945_led_pattern(priv, IWL_LED_LINK, blink_idx); - priv->last_blink_rate = blink_rate; + priv->last_blink_time = jiffies; + priv->last_blink_rate = blink_idx; priv->rxtxpackets = 0; } @@ -332,54 +308,55 @@ void iwl3945_led_background(struct iwl3945_priv *priv) int iwl3945_led_register(struct iwl3945_priv *priv) { char *trigger; - char name[32]; int ret; priv->last_blink_rate = 0; priv->rxtxpackets = 0; + priv->led_tpt = 0; priv->last_blink_time = 0; priv->allow_blinking = 0; trigger = ieee80211_get_radio_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:radio", + snprintf(priv->led[IWL_LED_TRG_RADIO].name, + sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio", wiphy_name(priv->hw->wiphy)); - priv->led[IWL_LED_TRG_RADIO].led_on = iwl3945_led_on_reg; - priv->led[IWL_LED_TRG_RADIO].led_off = iwl3945_led_off_reg; + priv->led[IWL_LED_TRG_RADIO].led_on = iwl3945_led_on; + priv->led[IWL_LED_TRG_RADIO].led_off = iwl3945_led_off; priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL; ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_RADIO], - IWL_LED_TRG_RADIO, 1, - name, trigger); + IWL_LED_TRG_RADIO, 1, trigger); + if (ret) goto exit_fail; trigger = ieee80211_get_assoc_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:assoc", + snprintf(priv->led[IWL_LED_TRG_ASSOC].name, + sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc", wiphy_name(priv->hw->wiphy)); ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC], - IWL_LED_TRG_ASSOC, 0, - name, trigger); + IWL_LED_TRG_ASSOC, 0, trigger); + /* for assoc always turn led on */ - priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_on_reg; - priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_on_reg; + priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_on; + priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_on; priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL; if (ret) goto exit_fail; trigger = ieee80211_get_rx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:RX", + snprintf(priv->led[IWL_LED_TRG_RX].name, + sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX", wiphy_name(priv->hw->wiphy)); - ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_RX], - IWL_LED_TRG_RX, 0, - name, trigger); + IWL_LED_TRG_RX, 0, trigger); priv->led[IWL_LED_TRG_RX].led_on = iwl3945_led_associated; priv->led[IWL_LED_TRG_RX].led_off = iwl3945_led_associated; @@ -389,12 +366,14 @@ int iwl3945_led_register(struct iwl3945_priv *priv) goto exit_fail; trigger = ieee80211_get_tx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:TX", + snprintf(priv->led[IWL_LED_TRG_TX].name, + sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX", wiphy_name(priv->hw->wiphy)); + ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_TX], - IWL_LED_TRG_TX, 0, - name, trigger); + IWL_LED_TRG_TX, 0, trigger); + priv->led[IWL_LED_TRG_TX].led_on = iwl3945_led_associated; priv->led[IWL_LED_TRG_TX].led_off = iwl3945_led_associated; priv->led[IWL_LED_TRG_TX].led_pattern = iwl3945_led_pattern; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h index b1d2f6b..2fbd126 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.h @@ -50,11 +50,12 @@ enum led_type { struct iwl3945_led { struct iwl3945_priv *priv; struct led_classdev led_dev; + char name[32]; int (*led_on) (struct iwl3945_priv *priv, int led_id); int (*led_off) (struct iwl3945_priv *priv, int led_id); int (*led_pattern) (struct iwl3945_priv *priv, int led_id, - enum led_brightness brightness); + unsigned int idx); enum led_type type; unsigned int registered; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index 85c2264..e51eeef 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -29,7 +29,6 @@ #include <linux/skbuff.h> #include <linux/wireless.h> #include <net/mac80211.h> -#include <net/ieee80211.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 0da179a..e7b0a68 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -323,7 +323,7 @@ static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv, tx_status->retry_count = tx_resp->failure_frame; /* tx_status->rts_retry_count = tx_resp->failure_rts; */ - tx_status->flags = ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ? + tx_status->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ? IEEE80211_TX_STATUS_ACK : 0; IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", @@ -386,7 +386,7 @@ static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, u32 print_dump = 0; /* set to 1 to dump all frames' contents */ u32 hundred = 0; u32 dataframe = 0; - u16 fc; + __le16 fc; u16 seq_ctl; u16 channel; u16 phy_flags; @@ -405,7 +405,7 @@ static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, u8 *data = IWL_RX_DATA(pkt); /* MAC header */ - fc = le16_to_cpu(header->frame_control); + fc = header->frame_control; seq_ctl = le16_to_cpu(header->seq_ctrl); /* metadata */ @@ -429,8 +429,8 @@ static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, /* if data frame is to us and all is good, * (optionally) print summary for only 1 out of every 100 */ - if (to_us && (fc & ~IEEE80211_FCTL_PROTECTED) == - (IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) { + if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) == + cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) { dataframe = 1; if (!group100) print_summary = 1; /* print each frame */ @@ -453,13 +453,13 @@ static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, if (hundred) title = "100Frames"; - else if (fc & IEEE80211_FCTL_RETRY) + else if (ieee80211_has_retry(fc)) title = "Retry"; - else if (ieee80211_is_assoc_response(fc)) + else if (ieee80211_is_assoc_resp(fc)) title = "AscRsp"; - else if (ieee80211_is_reassoc_response(fc)) + else if (ieee80211_is_reassoc_resp(fc)) title = "RasRsp"; - else if (ieee80211_is_probe_response(fc)) { + else if (ieee80211_is_probe_resp(fc)) { title = "PrbRsp"; print_dump = 1; /* dump frame contents */ } else if (ieee80211_is_beacon(fc)) { @@ -488,14 +488,14 @@ static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, if (dataframe) IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, " "len=%u, rssi=%d, chnl=%d, rate=%d, \n", - title, fc, header->addr1[5], + title, le16_to_cpu(fc), header->addr1[5], length, rssi, channel, rate); else { /* src/dst addresses assume managed mode */ IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, " "src=0x%02x, rssi=%u, tim=%lu usec, " "phy=0x%02x, chnl=%d\n", - title, fc, header->addr1[5], + title, le16_to_cpu(fc), header->addr1[5], header->addr3[5], rssi, tsf_low - priv->scan_start_tsf, phy_flags, channel); @@ -512,6 +512,23 @@ static inline void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, } #endif +/* This is necessary only for a number of statistics, see the caller. */ +static int iwl3945_is_network_packet(struct iwl3945_priv *priv, + struct ieee80211_hdr *header) +{ + /* Filter incoming packets to determine if they are targeted toward + * this network, discarding packets coming from ourselves */ + switch (priv->iw_mode) { + case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */ + /* packets to our IBSS update information */ + return !compare_ether_addr(header->addr3, priv->bssid); + case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ + /* packets to our IBSS update information */ + return !compare_ether_addr(header->addr2, priv->bssid); + default: + return 1; + } +} static void iwl3945_add_radiotap(struct iwl3945_priv *priv, struct sk_buff *skb, @@ -520,7 +537,7 @@ static void iwl3945_add_radiotap(struct iwl3945_priv *priv, { /* First cache any information we need before we overwrite * the information provided in the skb from the hardware */ - s8 signal = stats->ssi; + s8 signal = stats->signal; s8 noise = 0; int rate = stats->rate_idx; u64 tsf = stats->mactime; @@ -606,12 +623,14 @@ static void iwl3945_add_radiotap(struct iwl3945_priv *priv, stats->flag |= RX_FLAG_RADIOTAP; } -static void iwl3945_handle_data_packet(struct iwl3945_priv *priv, int is_data, +static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb, struct ieee80211_rx_status *stats) { - struct ieee80211_hdr *hdr; struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data; +#ifdef CONFIG_IWL3945_LEDS + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); +#endif struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); short len = le16_to_cpu(rx_hdr->len); @@ -633,8 +652,6 @@ static void iwl3945_handle_data_packet(struct iwl3945_priv *priv, int is_data, /* Set the size of the skb to the size of the frame */ skb_put(rxb->skb, le16_to_cpu(rx_hdr->len)); - hdr = (void *)rxb->skb->data; - if (iwl3945_param_hwcrypto) iwl3945_set_decrypted_flag(priv, rxb->skb, le32_to_cpu(rx_end->status), stats); @@ -643,7 +660,7 @@ static void iwl3945_handle_data_packet(struct iwl3945_priv *priv, int is_data, iwl3945_add_radiotap(priv, rxb->skb, rx_hdr, stats); #ifdef CONFIG_IWL3945_LEDS - if (is_data) + if (ieee80211_is_data(hdr->frame_control)) priv->rxtxpackets += len; #endif ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); @@ -691,10 +708,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, return; } - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - iwl3945_handle_data_packet(priv, 1, rxb, &rx_status); - return; - } + /* Convert 3945's rssi indicator to dBm */ rx_status.ssi = rx_stats->rssi - IWL_RSSI_OFFSET; @@ -756,6 +770,11 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, priv->last_rx_noise = rx_status.noise; } + if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { + iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); + return; + } + switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) { case IEEE80211_FTYPE_MGMT: switch (le16_to_cpu(header->frame_control) & @@ -774,8 +793,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)header; __le32 *pos; - pos = - (__le32 *) & mgmt->u.beacon. + pos = (__le32 *)&mgmt->u.beacon. timestamp; priv->timestamp0 = le32_to_cpu(pos[0]); priv->timestamp1 = le32_to_cpu(pos[1]); @@ -840,27 +858,12 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, } } - iwl3945_handle_data_packet(priv, 0, rxb, &rx_status); - break; - - case IEEE80211_FTYPE_CTL: - break; - - case IEEE80211_FTYPE_DATA: { - DECLARE_MAC_BUF(mac1); - DECLARE_MAC_BUF(mac2); - DECLARE_MAC_BUF(mac3); - - if (unlikely(iwl3945_is_duplicate_packet(priv, header))) - IWL_DEBUG_DROP("Dropping (dup): %s, %s, %s\n", - print_mac(mac1, header->addr1), - print_mac(mac2, header->addr2), - print_mac(mac3, header->addr3)); - else - iwl3945_handle_data_packet(priv, 1, rxb, &rx_status); + case IEEE80211_FTYPE_DATA: + /* fall through */ + default: + iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); break; } - } } int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv *priv, void *ptr, @@ -972,13 +975,13 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv, u8 rts_retry_limit; u8 data_retry_limit; __le32 tx_flags; - u16 fc = le16_to_cpu(hdr->frame_control); + __le16 fc = hdr->frame_control; rate = iwl3945_rates[rate_index].plcp; tx_flags = cmd->cmd.tx.tx_flags; /* We need to figure out how to get the sta->supp_rates while - * in this running context; perhaps encoding into ctrl->tx_rate? */ + * in this running context */ rate_mask = IWL_RATES_MASK; spin_lock_irqsave(&priv->sta_lock, flags); @@ -997,7 +1000,7 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv, else rts_retry_limit = 7; - if (ieee80211_is_probe_response(fc)) { + if (ieee80211_is_probe_resp(fc)) { data_retry_limit = 3; if (data_retry_limit < rts_retry_limit) rts_retry_limit = data_retry_limit; @@ -1007,12 +1010,12 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv, if (priv->data_retry_limit != -1) data_retry_limit = priv->data_retry_limit; - if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { - switch (fc & IEEE80211_FCTL_STYPE) { - case IEEE80211_STYPE_AUTH: - case IEEE80211_STYPE_DEAUTH: - case IEEE80211_STYPE_ASSOC_REQ: - case IEEE80211_STYPE_REASSOC_REQ: + if (ieee80211_is_mgmt(fc)) { + switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { + case cpu_to_le16(IEEE80211_STYPE_AUTH): + case cpu_to_le16(IEEE80211_STYPE_DEAUTH): + case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): + case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): if (tx_flags & TX_CMD_FLG_RTS_MSK) { tx_flags &= ~TX_CMD_FLG_RTS_MSK; tx_flags |= TX_CMD_FLG_CTS_MSK; @@ -1233,7 +1236,7 @@ int iwl3945_hw_nic_init(struct iwl3945_priv *priv) iwl3945_power_init_handle(priv); spin_lock_irqsave(&priv->lock, flags); - iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, (1 << 24)); + iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, CSR39_ANA_PLL_CFG_VAL); iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); @@ -1502,7 +1505,7 @@ static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) */ static inline int iwl3945_hw_reg_temp_out_of_range(int temperature) { - return (((temperature < -260) || (temperature > 25)) ? 1 : 0); + return ((temperature < -260) || (temperature > 25)) ? 1 : 0; } int iwl3945_hw_get_temperature(struct iwl3945_priv *priv) @@ -2622,7 +2625,7 @@ unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv, tx_beacon_cmd->tx.supp_rates[1] = (IWL_CCK_BASIC_RATES_MASK & 0xF); - return (sizeof(struct iwl3945_tx_beacon_cmd) + frame_size); + return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size; } void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index 5fa87b2..fc385cf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -36,6 +36,12 @@ #include <linux/kernel.h> #include <net/ieee80211_radiotap.h> +#if 0 /* Not in RHEL5 */ +/*used for rfkill*/ +#include <linux/rfkill.h> +#include <linux/input.h> +#endif + /* Hardware specific file defines the PCI IDs table for that hardware module */ extern struct pci_device_id iwl3945_hw_card_ids[]; @@ -507,8 +513,6 @@ struct iwl3945_ucode { u8 data[0]; /* data in same order as "size" elements */ }; -#define IWL_IBSS_MAC_HASH_SIZE 32 - struct iwl3945_ibss_seq { u8 mac[ETH_ALEN]; u16 seq_num; @@ -566,17 +570,8 @@ extern int iwl3945_send_add_station(struct iwl3945_priv *priv, struct iwl3945_addsta_cmd *sta, u8 flags); extern u8 iwl3945_add_station(struct iwl3945_priv *priv, const u8 *bssid, int is_ap, u8 flags); -extern int iwl3945_is_network_packet(struct iwl3945_priv *priv, - struct ieee80211_hdr *header); extern int iwl3945_power_init_handle(struct iwl3945_priv *priv); extern int iwl3945_eeprom_init(struct iwl3945_priv *priv); -extern void iwl3945_handle_data_packet_monitor(struct iwl3945_priv *priv, - struct iwl3945_rx_mem_buffer *rxb, - void *data, short len, - struct ieee80211_rx_status *stats, - u16 phy_flags); -extern int iwl3945_is_duplicate_packet(struct iwl3945_priv *priv, - struct ieee80211_hdr *header); extern int iwl3945_rx_queue_alloc(struct iwl3945_priv *priv); extern void iwl3945_rx_queue_reset(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq); @@ -687,6 +682,18 @@ enum { #endif +#ifdef CONFIG_IWL3945_RFKILL +struct iwl3945_priv; + +void iwl3945_rfkill_set_hw_state(struct iwl3945_priv *priv); +void iwl3945_rfkill_unregister(struct iwl3945_priv *priv); +int iwl3945_rfkill_init(struct iwl3945_priv *priv); +#else +static inline void iwl3945_rfkill_set_hw_state(struct iwl3945_priv *priv) {} +static inline void iwl3945_rfkill_unregister(struct iwl3945_priv *priv) {} +static inline int iwl3945_rfkill_init(struct iwl3945_priv *priv) { return 0; } +#endif + #define IWL_MAX_NUM_QUEUES IWL39_MAX_NUM_QUEUES struct iwl3945_priv { @@ -780,12 +787,17 @@ struct iwl3945_priv { struct iwl3945_init_alive_resp card_alive_init; struct iwl3945_alive_resp card_alive; +#ifdef CONFIG_IWL3945_RFKILL + struct rfkill *rfkill; +#endif + #ifdef CONFIG_IWL3945_LEDS struct iwl3945_led led[IWL_LED_TRG_MAX]; unsigned long last_blink_time; u8 last_blink_rate; u8 allow_blinking; unsigned int rxtxpackets; + u64 led_tpt; #endif @@ -836,20 +848,10 @@ struct iwl3945_priv { u8 mac80211_registered; - u32 notif_missed_beacons; - /* Rx'd packet timing information */ u32 last_beacon_time; u64 last_tsf; - /* Duplicate packet detection */ - u16 last_seq_num; - u16 last_frag_num; - unsigned long last_packet_time; - - /* Hash table for finding stations in IBSS network */ - struct list_head ibss_mac_hash[IWL_IBSS_MAC_HASH_SIZE]; - /* eeprom */ struct iwl3945_eeprom eeprom; @@ -886,6 +888,7 @@ struct iwl3945_priv { struct work_struct report_work; struct work_struct request_scan; struct work_struct beacon_update; + struct work_struct set_monitor; struct tasklet_struct irq_tasklet; @@ -924,11 +927,6 @@ static inline int is_channel_valid(const struct iwl3945_channel_info *ch_info) return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; } -static inline int is_channel_narrow(const struct iwl3945_channel_info *ch_info) -{ - return (ch_info->flags & EEPROM_CHANNEL_NARROW) ? 1 : 0; -} - static inline int is_channel_radar(const struct iwl3945_channel_info *ch_info) { return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h index 3bcd107..e69de29 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h @@ -1,2716 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * James P. Ketrenos <ipw2100-admin@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -/* - * Please use this file (iwl-4965-commands.h) only for uCode API definitions. - * Please use iwl-4965-hw.h for hardware-related definitions. - * Please use iwl-4965.h for driver implementation definitions. - */ - -#ifndef __iwl4965_commands_h__ -#define __iwl4965_commands_h__ - -enum { - REPLY_ALIVE = 0x1, - REPLY_ERROR = 0x2, - - /* RXON and QOS commands */ - REPLY_RXON = 0x10, - REPLY_RXON_ASSOC = 0x11, - REPLY_QOS_PARAM = 0x13, - REPLY_RXON_TIMING = 0x14, - - /* Multi-Station support */ - REPLY_ADD_STA = 0x18, - REPLY_REMOVE_STA = 0x19, /* not used */ - REPLY_REMOVE_ALL_STA = 0x1a, /* not used */ - - /* Security */ - REPLY_WEPKEY = 0x20, - - /* RX, TX, LEDs */ - REPLY_TX = 0x1c, - REPLY_RATE_SCALE = 0x47, /* 3945 only */ - REPLY_LEDS_CMD = 0x48, - REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */ - - /* 802.11h related */ - RADAR_NOTIFICATION = 0x70, /* not used */ - REPLY_QUIET_CMD = 0x71, /* not used */ - REPLY_CHANNEL_SWITCH = 0x72, - CHANNEL_SWITCH_NOTIFICATION = 0x73, - REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74, - SPECTRUM_MEASURE_NOTIFICATION = 0x75, - - /* Power Management */ - POWER_TABLE_CMD = 0x77, - PM_SLEEP_NOTIFICATION = 0x7A, - PM_DEBUG_STATISTIC_NOTIFIC = 0x7B, - - /* Scan commands and notifications */ - REPLY_SCAN_CMD = 0x80, - REPLY_SCAN_ABORT_CMD = 0x81, - SCAN_START_NOTIFICATION = 0x82, - SCAN_RESULTS_NOTIFICATION = 0x83, - SCAN_COMPLETE_NOTIFICATION = 0x84, - - /* IBSS/AP commands */ - BEACON_NOTIFICATION = 0x90, - REPLY_TX_BEACON = 0x91, - WHO_IS_AWAKE_NOTIFICATION = 0x94, /* not used */ - - /* Miscellaneous commands */ - QUIET_NOTIFICATION = 0x96, /* not used */ - REPLY_TX_PWR_TABLE_CMD = 0x97, - MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ - - /* Bluetooth device coexistance config command */ - REPLY_BT_CONFIG = 0x9b, - - /* Statistics */ - REPLY_STATISTICS_CMD = 0x9c, - STATISTICS_NOTIFICATION = 0x9d, - - /* RF-KILL commands and notifications */ - REPLY_CARD_STATE_CMD = 0xa0, - CARD_STATE_NOTIFICATION = 0xa1, - - /* Missed beacons notification */ - MISSED_BEACONS_NOTIFICATION = 0xa2, - - REPLY_CT_KILL_CONFIG_CMD = 0xa4, - SENSITIVITY_CMD = 0xa8, - REPLY_PHY_CALIBRATION_CMD = 0xb0, - REPLY_RX_PHY_CMD = 0xc0, - REPLY_RX_MPDU_CMD = 0xc1, - REPLY_RX = 0xc3, - REPLY_COMPRESSED_BA = 0xc5, - REPLY_MAX = 0xff -}; - -/****************************************************************************** - * (0) - * Commonly used structures and definitions: - * Command header, rate_n_flags, txpower - * - *****************************************************************************/ - -/* iwl_cmd_header flags value */ -#define IWL_CMD_FAILED_MSK 0x40 - -/** - * struct iwl_cmd_header - * - * This header format appears in the beginning of each command sent from the - * driver, and each response/notification received from uCode. - */ -struct iwl_cmd_header { - u8 cmd; /* Command ID: REPLY_RXON, etc. */ - u8 flags; /* IWL_CMD_* */ - /* - * The driver sets up the sequence number to values of its chosing. - * uCode does not use this value, but passes it back to the driver - * when sending the response to each driver-originated command, so - * the driver can match the response to the command. Since the values - * don't get used by uCode, the driver may set up an arbitrary format. - * - * There is one exception: uCode sets bit 15 when it originates - * the response/notification, i.e. when the response/notification - * is not a direct response to a command sent by the driver. For - * example, uCode issues REPLY_3945_RX when it sends a received frame - * to the driver; it is not a direct response to any driver command. - * - * The Linux driver uses the following format: - * - * 0:7 index/position within Tx queue - * 8:13 Tx queue selection - * 14:14 driver sets this to indicate command is in the 'huge' - * storage at the end of the command buffers, i.e. scan cmd - * 15:15 uCode sets this in uCode-originated response/notification - */ - __le16 sequence; - - /* command or response/notification data follows immediately */ - u8 data[0]; -} __attribute__ ((packed)); - -/** - * 4965 rate_n_flags bit fields - * - * rate_n_flags format is used in following 4965 commands: - * REPLY_RX (response only) - * REPLY_TX (both command and response) - * REPLY_TX_LINK_QUALITY_CMD - * - * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"): - * 2-0: 0) 6 Mbps - * 1) 12 Mbps - * 2) 18 Mbps - * 3) 24 Mbps - * 4) 36 Mbps - * 5) 48 Mbps - * 6) 54 Mbps - * 7) 60 Mbps - * - * 3: 0) Single stream (SISO) - * 1) Dual stream (MIMO) - * - * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data - * - * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"): - * 3-0: 0xD) 6 Mbps - * 0xF) 9 Mbps - * 0x5) 12 Mbps - * 0x7) 18 Mbps - * 0x9) 24 Mbps - * 0xB) 36 Mbps - * 0x1) 48 Mbps - * 0x3) 54 Mbps - * - * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"): - * 3-0: 10) 1 Mbps - * 20) 2 Mbps - * 55) 5.5 Mbps - * 110) 11 Mbps - */ -#define RATE_MCS_CODE_MSK 0x7 -#define RATE_MCS_MIMO_POS 3 -#define RATE_MCS_MIMO_MSK 0x8 -#define RATE_MCS_HT_DUP_POS 5 -#define RATE_MCS_HT_DUP_MSK 0x20 - -/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */ -#define RATE_MCS_FLAGS_POS 8 -#define RATE_MCS_HT_POS 8 -#define RATE_MCS_HT_MSK 0x100 - -/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ -#define RATE_MCS_CCK_POS 9 -#define RATE_MCS_CCK_MSK 0x200 - -/* Bit 10: (1) Use Green Field preamble */ -#define RATE_MCS_GF_POS 10 -#define RATE_MCS_GF_MSK 0x400 - -/* Bit 11: (1) Use 40Mhz FAT chnl width, (0) use 20 MHz legacy chnl width */ -#define RATE_MCS_FAT_POS 11 -#define RATE_MCS_FAT_MSK 0x800 - -/* Bit 12: (1) Duplicate data on both 20MHz chnls. FAT (bit 11) must be set. */ -#define RATE_MCS_DUP_POS 12 -#define RATE_MCS_DUP_MSK 0x1000 - -/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ -#define RATE_MCS_SGI_POS 13 -#define RATE_MCS_SGI_MSK 0x2000 - -/** - * rate_n_flags Tx antenna masks (4965 has 2 transmitters): - * bit14:15 01 B inactive, A active - * 10 B active, A inactive - * 11 Both active - */ -#define RATE_MCS_ANT_POS 14 -#define RATE_MCS_ANT_A_MSK 0x04000 -#define RATE_MCS_ANT_B_MSK 0x08000 -#define RATE_MCS_ANT_AB_MSK 0x0C000 - - -/** - * struct iwl4965_tx_power - txpower format used in REPLY_SCAN_CMD - * - * Scan uses only one transmitter, so only one analog/dsp gain pair is needed. - */ -struct iwl4965_tx_power { - u8 tx_gain; /* gain for analog radio */ - u8 dsp_atten; /* gain for DSP */ -} __attribute__ ((packed)); - -#define POWER_TABLE_NUM_ENTRIES 33 -#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32 -#define POWER_TABLE_CCK_ENTRY 32 - -/** - * union iwl4965_tx_power_dual_stream - * - * Host format used for REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH - * Use __le32 version (struct tx_power_dual_stream) when building command. - * - * Driver provides radio gain and DSP attenuation settings to device in pairs, - * one value for each transmitter chain. The first value is for transmitter A, - * second for transmitter B. - * - * For SISO bit rates, both values in a pair should be identical. - * For MIMO rates, one value may be different from the other, - * in order to balance the Tx output between the two transmitters. - * - * See more details in doc for TXPOWER in iwl-4965-hw.h. - */ -union iwl4965_tx_power_dual_stream { - struct { - u8 radio_tx_gain[2]; - u8 dsp_predis_atten[2]; - } s; - u32 dw; -}; - -/** - * struct tx_power_dual_stream - * - * Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH - * - * Same format as iwl_tx_power_dual_stream, but __le32 - */ -struct tx_power_dual_stream { - __le32 dw; -} __attribute__ ((packed)); - -/** - * struct iwl4965_tx_power_db - * - * Entire table within REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH - */ -struct iwl4965_tx_power_db { - struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES]; -} __attribute__ ((packed)); - - -/****************************************************************************** - * (0a) - * Alive and Error Commands & Responses: - * - *****************************************************************************/ - -#define UCODE_VALID_OK __constant_cpu_to_le32(0x1) -#define INITIALIZE_SUBTYPE (9) - -/* - * ("Initialize") REPLY_ALIVE = 0x1 (response only, not a command) - * - * uCode issues this "initialize alive" notification once the initialization - * uCode image has completed its work, and is ready to load the runtime image. - * This is the *first* "alive" notification that the driver will receive after - * rebooting uCode; the "initialize" alive is indicated by subtype field == 9. - * - * See comments documenting "BSM" (bootstrap state machine). - * - * For 4965, this notification contains important calibration data for - * calculating txpower settings: - * - * 1) Power supply voltage indication. The voltage sensor outputs higher - * values for lower voltage, and vice versa. - * - * 2) Temperature measurement parameters, for each of two channel widths - * (20 MHz and 40 MHz) supported by the radios. Temperature sensing - * is done via one of the receiver chains, and channel width influences - * the results. - * - * 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation, - * for each of 5 frequency ranges. - */ -struct iwl4965_init_alive_resp { - u8 ucode_minor; - u8 ucode_major; - __le16 reserved1; - u8 sw_rev[8]; - u8 ver_type; - u8 ver_subtype; /* "9" for initialize alive */ - __le16 reserved2; - __le32 log_event_table_ptr; - __le32 error_event_table_ptr; - __le32 timestamp; - __le32 is_valid; - - /* calibration values from "initialize" uCode */ - __le32 voltage; /* signed, higher value is lower voltage */ - __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for FAT channel*/ - __le32 therm_r2[2]; /* signed */ - __le32 therm_r3[2]; /* signed */ - __le32 therm_r4[2]; /* signed */ - __le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups, - * 2 Tx chains */ -} __attribute__ ((packed)); - - -/** - * REPLY_ALIVE = 0x1 (response only, not a command) - * - * uCode issues this "alive" notification once the runtime image is ready - * to receive commands from the driver. This is the *second* "alive" - * notification that the driver will receive after rebooting uCode; - * this "alive" is indicated by subtype field != 9. - * - * See comments documenting "BSM" (bootstrap state machine). - * - * This response includes two pointers to structures within the device's - * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: - * - * 1) log_event_table_ptr indicates base of the event log. This traces - * a 256-entry history of uCode execution within a circular buffer. - * Its header format is: - * - * __le32 log_size; log capacity (in number of entries) - * __le32 type; (1) timestamp with each entry, (0) no timestamp - * __le32 wraps; # times uCode has wrapped to top of circular buffer - * __le32 write_index; next circular buffer entry that uCode would fill - * - * The header is followed by the circular buffer of log entries. Entries - * with timestamps have the following format: - * - * __le32 event_id; range 0 - 1500 - * __le32 timestamp; low 32 bits of TSF (of network, if associated) - * __le32 data; event_id-specific data value - * - * Entries without timestamps contain only event_id and data. - * - * 2) error_event_table_ptr indicates base of the error log. This contains - * information about any uCode error that occurs. For 4965, the format - * of the error log is: - * - * __le32 valid; (nonzero) valid, (0) log is empty - * __le32 error_id; type of error - * __le32 pc; program counter - * __le32 blink1; branch link - * __le32 blink2; branch link - * __le32 ilink1; interrupt link - * __le32 ilink2; interrupt link - * __le32 data1; error-specific data - * __le32 data2; error-specific data - * __le32 line; source code line of error - * __le32 bcon_time; beacon timer - * __le32 tsf_low; network timestamp function timer - * __le32 tsf_hi; network timestamp function timer - * - * The Linux driver can print both logs to the system log when a uCode error - * occurs. - */ -struct iwl4965_alive_resp { - u8 ucode_minor; - u8 ucode_major; - __le16 reserved1; - u8 sw_rev[8]; - u8 ver_type; - u8 ver_subtype; /* not "9" for runtime alive */ - __le16 reserved2; - __le32 log_event_table_ptr; /* SRAM address for event log */ - __le32 error_event_table_ptr; /* SRAM address for error log */ - __le32 timestamp; - __le32 is_valid; -} __attribute__ ((packed)); - - -union tsf { - u8 byte[8]; - __le16 word[4]; - __le32 dw[2]; -}; - -/* - * REPLY_ERROR = 0x2 (response only, not a command) - */ -struct iwl4965_error_resp { - __le32 error_type; - u8 cmd_id; - u8 reserved1; - __le16 bad_cmd_seq_num; - __le32 error_info; - union tsf timestamp; -} __attribute__ ((packed)); - -/****************************************************************************** - * (1) - * RXON Commands & Responses: - * - *****************************************************************************/ - -/* - * Rx config defines & structure - */ -/* rx_config device types */ -enum { - RXON_DEV_TYPE_AP = 1, - RXON_DEV_TYPE_ESS = 3, - RXON_DEV_TYPE_IBSS = 4, - RXON_DEV_TYPE_SNIFFER = 6, -}; - - -#define RXON_RX_CHAIN_DRIVER_FORCE_MSK __constant_cpu_to_le16(0x1 << 0) -#define RXON_RX_CHAIN_VALID_MSK __constant_cpu_to_le16(0x7 << 1) -#define RXON_RX_CHAIN_VALID_POS (1) -#define RXON_RX_CHAIN_FORCE_SEL_MSK __constant_cpu_to_le16(0x7 << 4) -#define RXON_RX_CHAIN_FORCE_SEL_POS (4) -#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK __constant_cpu_to_le16(0x7 << 7) -#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7) -#define RXON_RX_CHAIN_CNT_MSK __constant_cpu_to_le16(0x3 << 10) -#define RXON_RX_CHAIN_CNT_POS (10) -#define RXON_RX_CHAIN_MIMO_CNT_MSK __constant_cpu_to_le16(0x3 << 12) -#define RXON_RX_CHAIN_MIMO_CNT_POS (12) -#define RXON_RX_CHAIN_MIMO_FORCE_MSK __constant_cpu_to_le16(0x1 << 14) -#define RXON_RX_CHAIN_MIMO_FORCE_POS (14) - -/* rx_config flags */ -/* band & modulation selection */ -#define RXON_FLG_BAND_24G_MSK __constant_cpu_to_le32(1 << 0) -#define RXON_FLG_CCK_MSK __constant_cpu_to_le32(1 << 1) -/* auto detection enable */ -#define RXON_FLG_AUTO_DETECT_MSK __constant_cpu_to_le32(1 << 2) -/* TGg protection when tx */ -#define RXON_FLG_TGG_PROTECT_MSK __constant_cpu_to_le32(1 << 3) -/* cck short slot & preamble */ -#define RXON_FLG_SHORT_SLOT_MSK __constant_cpu_to_le32(1 << 4) -#define RXON_FLG_SHORT_PREAMBLE_MSK __constant_cpu_to_le32(1 << 5) -/* antenna selection */ -#define RXON_FLG_DIS_DIV_MSK __constant_cpu_to_le32(1 << 7) -#define RXON_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0x0f00) -#define RXON_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8) -#define RXON_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9) -/* radar detection enable */ -#define RXON_FLG_RADAR_DETECT_MSK __constant_cpu_to_le32(1 << 12) -#define RXON_FLG_TGJ_NARROW_BAND_MSK __constant_cpu_to_le32(1 << 13) -/* rx response to host with 8-byte TSF -* (according to ON_AIR deassertion) */ -#define RXON_FLG_TSF2HOST_MSK __constant_cpu_to_le32(1 << 15) - - -/* HT flags */ -#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22) -#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK __constant_cpu_to_le32(0x1 << 22) - -#define RXON_FLG_HT_OPERATING_MODE_POS (23) - -#define RXON_FLG_HT_PROT_MSK __constant_cpu_to_le32(0x1 << 23) -#define RXON_FLG_FAT_PROT_MSK __constant_cpu_to_le32(0x2 << 23) - -#define RXON_FLG_CHANNEL_MODE_POS (25) -#define RXON_FLG_CHANNEL_MODE_MSK __constant_cpu_to_le32(0x3 << 25) -#define RXON_FLG_CHANNEL_MODE_PURE_40_MSK __constant_cpu_to_le32(0x1 << 25) -#define RXON_FLG_CHANNEL_MODE_MIXED_MSK __constant_cpu_to_le32(0x2 << 25) - -/* rx_config filter flags */ -/* accept all data frames */ -#define RXON_FILTER_PROMISC_MSK __constant_cpu_to_le32(1 << 0) -/* pass control & management to host */ -#define RXON_FILTER_CTL2HOST_MSK __constant_cpu_to_le32(1 << 1) -/* accept multi-cast */ -#define RXON_FILTER_ACCEPT_GRP_MSK __constant_cpu_to_le32(1 << 2) -/* don't decrypt uni-cast frames */ -#define RXON_FILTER_DIS_DECRYPT_MSK __constant_cpu_to_le32(1 << 3) -/* don't decrypt multi-cast frames */ -#define RXON_FILTER_DIS_GRP_DECRYPT_MSK __constant_cpu_to_le32(1 << 4) -/* STA is associated */ -#define RXON_FILTER_ASSOC_MSK __constant_cpu_to_le32(1 << 5) -/* transfer to host non bssid beacons in associated state */ -#define RXON_FILTER_BCON_AWARE_MSK __constant_cpu_to_le32(1 << 6) - -/** - * REPLY_RXON = 0x10 (command, has simple generic response) - * - * RXON tunes the radio tuner to a service channel, and sets up a number - * of parameters that are used primarily for Rx, but also for Tx operations. - * - * NOTE: When tuning to a new channel, driver must set the - * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent - * info within the device, including the station tables, tx retry - * rate tables, and txpower tables. Driver must build a new station - * table and txpower table before transmitting anything on the RXON - * channel. - * - * NOTE: All RXONs wipe clean the internal txpower table. Driver must - * issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10), - * regardless of whether RXON_FILTER_ASSOC_MSK is set. - */ -struct iwl4965_rxon_cmd { - u8 node_addr[6]; - __le16 reserved1; - u8 bssid_addr[6]; - __le16 reserved2; - u8 wlap_bssid_addr[6]; - __le16 reserved3; - u8 dev_type; - u8 air_propagation; - __le16 rx_chain; - u8 ofdm_basic_rates; - u8 cck_basic_rates; - __le16 assoc_id; - __le32 flags; - __le32 filter_flags; - __le16 channel; - u8 ofdm_ht_single_stream_basic_rates; - u8 ofdm_ht_dual_stream_basic_rates; -} __attribute__ ((packed)); - -/* - * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response) - */ -struct iwl4965_rxon_assoc_cmd { - __le32 flags; - __le32 filter_flags; - u8 ofdm_basic_rates; - u8 cck_basic_rates; - u8 ofdm_ht_single_stream_basic_rates; - u8 ofdm_ht_dual_stream_basic_rates; - __le16 rx_chain_select_flags; - __le16 reserved; -} __attribute__ ((packed)); - -/* - * REPLY_RXON_TIMING = 0x14 (command, has simple generic response) - */ -struct iwl4965_rxon_time_cmd { - union tsf timestamp; - __le16 beacon_interval; - __le16 atim_window; - __le32 beacon_init_val; - __le16 listen_interval; - __le16 reserved; -} __attribute__ ((packed)); - -/* - * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response) - */ -struct iwl4965_channel_switch_cmd { - u8 band; - u8 expect_beacon; - __le16 channel; - __le32 rxon_flags; - __le32 rxon_filter_flags; - __le32 switch_time; - struct iwl4965_tx_power_db tx_power; -} __attribute__ ((packed)); - -/* - * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command) - */ -struct iwl4965_csa_notification { - __le16 band; - __le16 channel; - __le32 status; /* 0 - OK, 1 - fail */ -} __attribute__ ((packed)); - -/****************************************************************************** - * (2) - * Quality-of-Service (QOS) Commands & Responses: - * - *****************************************************************************/ - -/** - * struct iwl_ac_qos -- QOS timing params for REPLY_QOS_PARAM - * One for each of 4 EDCA access categories in struct iwl_qosparam_cmd - * - * @cw_min: Contention window, start value in numbers of slots. - * Should be a power-of-2, minus 1. Device's default is 0x0f. - * @cw_max: Contention window, max value in numbers of slots. - * Should be a power-of-2, minus 1. Device's default is 0x3f. - * @aifsn: Number of slots in Arbitration Interframe Space (before - * performing random backoff timing prior to Tx). Device default 1. - * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. - * - * Device will automatically increase contention window by (2*CW) + 1 for each - * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW - * value, to cap the CW value. - */ -struct iwl4965_ac_qos { - __le16 cw_min; - __le16 cw_max; - u8 aifsn; - u8 reserved1; - __le16 edca_txop; -} __attribute__ ((packed)); - -/* QoS flags defines */ -#define QOS_PARAM_FLG_UPDATE_EDCA_MSK __constant_cpu_to_le32(0x01) -#define QOS_PARAM_FLG_TGN_MSK __constant_cpu_to_le32(0x02) -#define QOS_PARAM_FLG_TXOP_TYPE_MSK __constant_cpu_to_le32(0x10) - -/* Number of Access Categories (AC) (EDCA), queues 0..3 */ -#define AC_NUM 4 - -/* - * REPLY_QOS_PARAM = 0x13 (command, has simple generic response) - * - * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs - * 0: Background, 1: Best Effort, 2: Video, 3: Voice. - */ -struct iwl4965_qosparam_cmd { - __le32 qos_flags; - struct iwl4965_ac_qos ac[AC_NUM]; -} __attribute__ ((packed)); - -/****************************************************************************** - * (3) - * Add/Modify Stations Commands & Responses: - * - *****************************************************************************/ -/* - * Multi station support - */ - -/* Special, dedicated locations within device's station table */ -#define IWL_AP_ID 0 -#define IWL_MULTICAST_ID 1 -#define IWL_STA_ID 2 -#define IWL4965_BROADCAST_ID 31 -#define IWL4965_STATION_COUNT 32 - -#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/ -#define IWL_INVALID_STATION 255 - -#define STA_FLG_PWR_SAVE_MSK __constant_cpu_to_le32(1 << 8); -#define STA_FLG_RTS_MIMO_PROT_MSK __constant_cpu_to_le32(1 << 17) -#define STA_FLG_AGG_MPDU_8US_MSK __constant_cpu_to_le32(1 << 18) -#define STA_FLG_MAX_AGG_SIZE_POS (19) -#define STA_FLG_MAX_AGG_SIZE_MSK __constant_cpu_to_le32(3 << 19) -#define STA_FLG_FAT_EN_MSK __constant_cpu_to_le32(1 << 21) -#define STA_FLG_MIMO_DIS_MSK __constant_cpu_to_le32(1 << 22) -#define STA_FLG_AGG_MPDU_DENSITY_POS (23) -#define STA_FLG_AGG_MPDU_DENSITY_MSK __constant_cpu_to_le32(7 << 23) - -/* Use in mode field. 1: modify existing entry, 0: add new station entry */ -#define STA_CONTROL_MODIFY_MSK 0x01 - -/* key flags __le16*/ -#define STA_KEY_FLG_ENCRYPT_MSK __constant_cpu_to_le16(0x0007) -#define STA_KEY_FLG_NO_ENC __constant_cpu_to_le16(0x0000) -#define STA_KEY_FLG_WEP __constant_cpu_to_le16(0x0001) -#define STA_KEY_FLG_CCMP __constant_cpu_to_le16(0x0002) -#define STA_KEY_FLG_TKIP __constant_cpu_to_le16(0x0003) - -#define STA_KEY_FLG_KEYID_POS 8 -#define STA_KEY_FLG_INVALID __constant_cpu_to_le16(0x0800) -/* wep key is either from global key (0) or from station info array (1) */ -#define STA_KEY_FLG_MAP_KEY_MSK __constant_cpu_to_le16(0x0008) - -/* wep key in STA: 5-bytes (0) or 13-bytes (1) */ -#define STA_KEY_FLG_KEY_SIZE_MSK __constant_cpu_to_le16(0x1000) -#define STA_KEY_MULTICAST_MSK __constant_cpu_to_le16(0x4000) -#define STA_KEY_MAX_NUM 8 - -/* Flags indicate whether to modify vs. don't change various station params */ -#define STA_MODIFY_KEY_MASK 0x01 -#define STA_MODIFY_TID_DISABLE_TX 0x02 -#define STA_MODIFY_TX_RATE_MSK 0x04 -#define STA_MODIFY_ADDBA_TID_MSK 0x08 -#define STA_MODIFY_DELBA_TID_MSK 0x10 - -/* Receiver address (actually, Rx station's index into station table), - * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */ -#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid)) - -struct iwl4965_keyinfo { - __le16 key_flags; - u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ - u8 reserved1; - __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */ - u8 key_offset; - u8 reserved2; - u8 key[16]; /* 16-byte unicast decryption key */ -} __attribute__ ((packed)); - -/** - * struct sta_id_modify - * @addr[ETH_ALEN]: station's MAC address - * @sta_id: index of station in uCode's station table - * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change - * - * Driver selects unused table index when adding new station, - * or the index to a pre-existing station entry when modifying that station. - * Some indexes have special purposes (IWL_AP_ID, index 0, is for AP). - * - * modify_mask flags select which parameters to modify vs. leave alone. - */ -struct sta_id_modify { - u8 addr[ETH_ALEN]; - __le16 reserved1; - u8 sta_id; - u8 modify_mask; - __le16 reserved2; -} __attribute__ ((packed)); - -/* - * REPLY_ADD_STA = 0x18 (command) - * - * The device contains an internal table of per-station information, - * with info on security keys, aggregation parameters, and Tx rates for - * initial Tx attempt and any retries (4965 uses REPLY_TX_LINK_QUALITY_CMD, - * 3945 uses REPLY_RATE_SCALE to set up rate tables). - * - * REPLY_ADD_STA sets up the table entry for one station, either creating - * a new entry, or modifying a pre-existing one. - * - * NOTE: RXON command (without "associated" bit set) wipes the station table - * clean. Moving into RF_KILL state does this also. Driver must set up - * new station table before transmitting anything on the RXON channel - * (except active scans or active measurements; those commands carry - * their own txpower/rate setup data). - * - * When getting started on a new channel, driver must set up the - * IWL_BROADCAST_ID entry (last entry in the table). For a client - * station in a BSS, once an AP is selected, driver sets up the AP STA - * in the IWL_AP_ID entry (1st entry in the table). BROADCAST and AP - * are all that are needed for a BSS client station. If the device is - * used as AP, or in an IBSS network, driver must set up station table - * entries for all STAs in network, starting with index IWL_STA_ID. - */ -struct iwl4965_addsta_cmd { - u8 mode; /* 1: modify existing, 0: add new station */ - u8 reserved[3]; - struct sta_id_modify sta; - struct iwl4965_keyinfo key; - __le32 station_flags; /* STA_FLG_* */ - __le32 station_flags_msk; /* STA_FLG_* */ - - /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) - * corresponding to bit (e.g. bit 5 controls TID 5). - * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ - __le16 tid_disable_tx; - - __le16 reserved1; - - /* TID for which to add block-ack support. - * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ - u8 add_immediate_ba_tid; - - /* TID for which to remove block-ack support. - * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ - u8 remove_immediate_ba_tid; - - /* Starting Sequence Number for added block-ack support. - * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ - __le16 add_immediate_ba_ssn; - - __le32 reserved2; -} __attribute__ ((packed)); - -#define ADD_STA_SUCCESS_MSK 0x1 -#define ADD_STA_NO_ROOM_IN_TABLE 0x2 -#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4 -#define ADD_STA_MODIFY_NON_EXIST_STA 0x8 -/* - * REPLY_ADD_STA = 0x18 (response) - */ -struct iwl4965_add_sta_resp { - u8 status; /* ADD_STA_* */ -} __attribute__ ((packed)); - -/* - * REPLY_WEP_KEY = 0x20 - */ -struct iwl_wep_key { - u8 key_index; - u8 key_offset; - u8 reserved1[2]; - u8 key_size; - u8 reserved2[3]; - u8 key[16]; -} __attribute__ ((packed)); - -struct iwl_wep_cmd { - u8 num_keys; - u8 global_key_type; - u8 flags; - u8 reserved; - struct iwl_wep_key key[0]; -} __attribute__ ((packed)); - -#define WEP_KEY_WEP_TYPE 1 -#define WEP_KEYS_MAX 4 -#define WEP_INVALID_OFFSET 0xff -#define WEP_KEY_LEN_128 13 - -/****************************************************************************** - * (4) - * Rx Responses: - * - *****************************************************************************/ - -struct iwl4965_rx_frame_stats { - u8 phy_count; - u8 id; - u8 rssi; - u8 agc; - __le16 sig_avg; - __le16 noise_diff; - u8 payload[0]; -} __attribute__ ((packed)); - -struct iwl4965_rx_frame_hdr { - __le16 channel; - __le16 phy_flags; - u8 reserved1; - u8 rate; - __le16 len; - u8 payload[0]; -} __attribute__ ((packed)); - -#define RX_RES_STATUS_NO_CRC32_ERROR __constant_cpu_to_le32(1 << 0) -#define RX_RES_STATUS_NO_RXE_OVERFLOW __constant_cpu_to_le32(1 << 1) - -#define RX_RES_PHY_FLAGS_BAND_24_MSK __constant_cpu_to_le16(1 << 0) -#define RX_RES_PHY_FLAGS_MOD_CCK_MSK __constant_cpu_to_le16(1 << 1) -#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK __constant_cpu_to_le16(1 << 2) -#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK __constant_cpu_to_le16(1 << 3) -#define RX_RES_PHY_FLAGS_ANTENNA_MSK __constant_cpu_to_le16(0xf0) - -#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) -#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8) -#define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8) -#define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8) -#define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8) -#define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8) - -#define RX_RES_STATUS_STATION_FOUND (1<<6) -#define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7) - -#define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11) -#define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11) -#define RX_RES_STATUS_DECRYPT_OK (0x3 << 11) -#define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11) -#define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11) - -#define RX_MPDU_RES_STATUS_ICV_OK (0x20) -#define RX_MPDU_RES_STATUS_MIC_OK (0x40) -#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7) -#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800) - -struct iwl4965_rx_frame_end { - __le32 status; - __le64 timestamp; - __le32 beacon_timestamp; -} __attribute__ ((packed)); - -/* - * REPLY_3945_RX = 0x1b (response only, not a command) - * - * NOTE: DO NOT dereference from casts to this structure - * It is provided only for calculating minimum data set size. - * The actual offsets of the hdr and end are dynamic based on - * stats.phy_count - */ -struct iwl4965_rx_frame { - struct iwl4965_rx_frame_stats stats; - struct iwl4965_rx_frame_hdr hdr; - struct iwl4965_rx_frame_end end; -} __attribute__ ((packed)); - -/* Fixed (non-configurable) rx data from phy */ -#define RX_PHY_FLAGS_ANTENNAE_OFFSET (4) -#define RX_PHY_FLAGS_ANTENNAE_MASK (0x70) -#define IWL_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ -#define IWL_AGC_DB_POS (7) -struct iwl4965_rx_non_cfg_phy { - __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */ - __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */ - u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */ - u8 pad[0]; -} __attribute__ ((packed)); - -/* - * REPLY_RX = 0xc3 (response only, not a command) - * Used only for legacy (non 11n) frames. - */ -#define RX_RES_PHY_CNT 14 -struct iwl4965_rx_phy_res { - u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */ - u8 cfg_phy_cnt; /* configurable DSP phy data byte count */ - u8 stat_id; /* configurable DSP phy data set ID */ - u8 reserved1; - __le64 timestamp; /* TSF at on air rise */ - __le32 beacon_time_stamp; /* beacon at on-air rise */ - __le16 phy_flags; /* general phy flags: band, modulation, ... */ - __le16 channel; /* channel number */ - __le16 non_cfg_phy[RX_RES_PHY_CNT]; /* upto 14 phy entries */ - __le32 reserved2; - __le32 rate_n_flags; /* RATE_MCS_* */ - __le16 byte_count; /* frame's byte-count */ - __le16 reserved3; -} __attribute__ ((packed)); - -struct iwl4965_rx_mpdu_res_start { - __le16 byte_count; - __le16 reserved; -} __attribute__ ((packed)); - - -/****************************************************************************** - * (5) - * Tx Commands & Responses: - * - * Driver must place each REPLY_TX command into one of the prioritized Tx - * queues in host DRAM, shared between driver and device (see comments for - * SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode - * are preparing to transmit, the device pulls the Tx command over the PCI - * bus via one of the device's Tx DMA channels, to fill an internal FIFO - * from which data will be transmitted. - * - * uCode handles all timing and protocol related to control frames - * (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler - * handle reception of block-acks; uCode updates the host driver via - * REPLY_COMPRESSED_BA (4965). - * - * uCode handles retrying Tx when an ACK is expected but not received. - * This includes trying lower data rates than the one requested in the Tx - * command, as set up by the REPLY_RATE_SCALE (for 3945) or - * REPLY_TX_LINK_QUALITY_CMD (4965). - * - * Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD. - * This command must be executed after every RXON command, before Tx can occur. - *****************************************************************************/ - -/* REPLY_TX Tx flags field */ - -/* 1: Use Request-To-Send protocol before this frame. - * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */ -#define TX_CMD_FLG_RTS_MSK __constant_cpu_to_le32(1 << 1) - -/* 1: Transmit Clear-To-Send to self before this frame. - * Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames. - * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */ -#define TX_CMD_FLG_CTS_MSK __constant_cpu_to_le32(1 << 2) - -/* 1: Expect ACK from receiving station - * 0: Don't expect ACK (MAC header's duration field s/b 0) - * Set this for unicast frames, but not broadcast/multicast. */ -#define TX_CMD_FLG_ACK_MSK __constant_cpu_to_le32(1 << 3) - -/* For 4965: - * 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD). - * Tx command's initial_rate_index indicates first rate to try; - * uCode walks through table for additional Tx attempts. - * 0: Use Tx rate/MCS from Tx command's rate_n_flags field. - * This rate will be used for all Tx attempts; it will not be scaled. */ -#define TX_CMD_FLG_STA_RATE_MSK __constant_cpu_to_le32(1 << 4) - -/* 1: Expect immediate block-ack. - * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */ -#define TX_CMD_FLG_IMM_BA_RSP_MASK __constant_cpu_to_le32(1 << 6) - -/* 1: Frame requires full Tx-Op protection. - * Set this if either RTS or CTS Tx Flag gets set. */ -#define TX_CMD_FLG_FULL_TXOP_PROT_MSK __constant_cpu_to_le32(1 << 7) - -/* Tx antenna selection field; used only for 3945, reserved (0) for 4965. - * Set field to "0" to allow 3945 uCode to select antenna (normal usage). */ -#define TX_CMD_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0xf00) -#define TX_CMD_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8) -#define TX_CMD_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9) - -/* 1: Ignore Bluetooth priority for this frame. - * 0: Delay Tx until Bluetooth device is done (normal usage). */ -#define TX_CMD_FLG_BT_DIS_MSK __constant_cpu_to_le32(1 << 12) - -/* 1: uCode overrides sequence control field in MAC header. - * 0: Driver provides sequence control field in MAC header. - * Set this for management frames, non-QOS data frames, non-unicast frames, - * and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */ -#define TX_CMD_FLG_SEQ_CTL_MSK __constant_cpu_to_le32(1 << 13) - -/* 1: This frame is non-last MPDU; more fragments are coming. - * 0: Last fragment, or not using fragmentation. */ -#define TX_CMD_FLG_MORE_FRAG_MSK __constant_cpu_to_le32(1 << 14) - -/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame. - * 0: No TSF required in outgoing frame. - * Set this for transmitting beacons and probe responses. */ -#define TX_CMD_FLG_TSF_MSK __constant_cpu_to_le32(1 << 16) - -/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword - * alignment of frame's payload data field. - * 0: No pad - * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4 - * field (but not both). Driver must align frame data (i.e. data following - * MAC header) to DWORD boundary. */ -#define TX_CMD_FLG_MH_PAD_MSK __constant_cpu_to_le32(1 << 20) - -/* accelerate aggregation support - * 0 - no CCMP encryption; 1 - CCMP encryption */ -#define TX_CMD_FLG_AGG_CCMP_MSK __constant_cpu_to_le32(1 << 22) - -/* HCCA-AP - disable duration overwriting. */ -#define TX_CMD_FLG_DUR_MSK __constant_cpu_to_le32(1 << 25) - - -/* - * TX command security control - */ -#define TX_CMD_SEC_WEP 0x01 -#define TX_CMD_SEC_CCM 0x02 -#define TX_CMD_SEC_TKIP 0x03 -#define TX_CMD_SEC_MSK 0x03 -#define TX_CMD_SEC_SHIFT 6 -#define TX_CMD_SEC_KEY128 0x08 - -/* - * 4965 uCode updates these Tx attempt count values in host DRAM. - * Used for managing Tx retries when expecting block-acks. - * Driver should set these fields to 0. - */ -struct iwl4965_dram_scratch { - u8 try_cnt; /* Tx attempts */ - u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */ - __le16 reserved; -} __attribute__ ((packed)); - -/* - * REPLY_TX = 0x1c (command) - */ -struct iwl4965_tx_cmd { - /* - * MPDU byte count: - * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, - * + 8 byte IV for CCM or TKIP (not used for WEP) - * + Data payload - * + 8-byte MIC (not used for CCM/WEP) - * NOTE: Does not include Tx command bytes, post-MAC pad bytes, - * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i - * Range: 14-2342 bytes. - */ - __le16 len; - - /* - * MPDU or MSDU byte count for next frame. - * Used for fragmentation and bursting, but not 11n aggregation. - * Same as "len", but for next frame. Set to 0 if not applicable. - */ - __le16 next_frame_len; - - __le32 tx_flags; /* TX_CMD_FLG_* */ - - /* 4965's uCode may modify this field of the Tx command (in host DRAM!). - * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */ - struct iwl4965_dram_scratch scratch; - - /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */ - __le32 rate_n_flags; /* RATE_MCS_* */ - - /* Index of destination station in uCode's station table */ - u8 sta_id; - - /* Type of security encryption: CCM or TKIP */ - u8 sec_ctl; /* TX_CMD_SEC_* */ - - /* - * Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial - * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for - * data frames, this field may be used to selectively reduce initial - * rate (via non-0 value) for special frames (e.g. management), while - * still supporting rate scaling for all frames. - */ - u8 initial_rate_index; - u8 reserved; - u8 key[16]; - __le16 next_frame_flags; - __le16 reserved2; - union { - __le32 life_time; - __le32 attempt; - } stop_time; - - /* Host DRAM physical address pointer to "scratch" in this command. - * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */ - __le32 dram_lsb_ptr; - u8 dram_msb_ptr; - - u8 rts_retry_limit; /*byte 50 */ - u8 data_retry_limit; /*byte 51 */ - u8 tid_tspec; - union { - __le16 pm_frame_timeout; - __le16 attempt_duration; - } timeout; - - /* - * Duration of EDCA burst Tx Opportunity, in 32-usec units. - * Set this if txop time is not specified by HCCA protocol (e.g. by AP). - */ - __le16 driver_txop; - - /* - * MAC header goes here, followed by 2 bytes padding if MAC header - * length is 26 or 30 bytes, followed by payload data - */ - u8 payload[0]; - struct ieee80211_hdr hdr[0]; -} __attribute__ ((packed)); - -/* TX command response is sent after *all* transmission attempts. - * - * NOTES: - * - * TX_STATUS_FAIL_NEXT_FRAG - * - * If the fragment flag in the MAC header for the frame being transmitted - * is set and there is insufficient time to transmit the next frame, the - * TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'. - * - * TX_STATUS_FIFO_UNDERRUN - * - * Indicates the host did not provide bytes to the FIFO fast enough while - * a TX was in progress. - * - * TX_STATUS_FAIL_MGMNT_ABORT - * - * This status is only possible if the ABORT ON MGMT RX parameter was - * set to true with the TX command. - * - * If the MSB of the status parameter is set then an abort sequence is - * required. This sequence consists of the host activating the TX Abort - * control line, and then waiting for the TX Abort command response. This - * indicates that a the device is no longer in a transmit state, and that the - * command FIFO has been cleared. The host must then deactivate the TX Abort - * control line. Receiving is still allowed in this case. - */ -enum { - TX_STATUS_SUCCESS = 0x01, - TX_STATUS_DIRECT_DONE = 0x02, - TX_STATUS_FAIL_SHORT_LIMIT = 0x82, - TX_STATUS_FAIL_LONG_LIMIT = 0x83, - TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84, - TX_STATUS_FAIL_MGMNT_ABORT = 0x85, - TX_STATUS_FAIL_NEXT_FRAG = 0x86, - TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, - TX_STATUS_FAIL_DEST_PS = 0x88, - TX_STATUS_FAIL_ABORTED = 0x89, - TX_STATUS_FAIL_BT_RETRY = 0x8a, - TX_STATUS_FAIL_STA_INVALID = 0x8b, - TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, - TX_STATUS_FAIL_TID_DISABLE = 0x8d, - TX_STATUS_FAIL_FRAME_FLUSHED = 0x8e, - TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, - TX_STATUS_FAIL_TX_LOCKED = 0x90, - TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, -}; - -#define TX_PACKET_MODE_REGULAR 0x0000 -#define TX_PACKET_MODE_BURST_SEQ 0x0100 -#define TX_PACKET_MODE_BURST_FIRST 0x0200 - -enum { - TX_POWER_PA_NOT_ACTIVE = 0x0, -}; - -enum { - TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */ - TX_STATUS_DELAY_MSK = 0x00000040, - TX_STATUS_ABORT_MSK = 0x00000080, - TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */ - TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */ - TX_RESERVED = 0x00780000, /* bits 19:22 */ - TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */ - TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */ -}; - -/* ******************************* - * TX aggregation status - ******************************* */ - -enum { - AGG_TX_STATE_TRANSMITTED = 0x00, - AGG_TX_STATE_UNDERRUN_MSK = 0x01, - AGG_TX_STATE_BT_PRIO_MSK = 0x02, - AGG_TX_STATE_FEW_BYTES_MSK = 0x04, - AGG_TX_STATE_ABORT_MSK = 0x08, - AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10, - AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20, - AGG_TX_STATE_LAST_SENT_BT_KILL_MSK = 0x40, - AGG_TX_STATE_SCD_QUERY_MSK = 0x80, - AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100, - AGG_TX_STATE_RESPONSE_MSK = 0x1ff, - AGG_TX_STATE_DUMP_TX_MSK = 0x200, - AGG_TX_STATE_DELAY_TX_MSK = 0x400 -}; - -#define AGG_TX_STATE_LAST_SENT_MSK \ -(AGG_TX_STATE_LAST_SENT_TTL_MSK | \ - AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \ - AGG_TX_STATE_LAST_SENT_BT_KILL_MSK) - -/* # tx attempts for first frame in aggregation */ -#define AGG_TX_STATE_TRY_CNT_POS 12 -#define AGG_TX_STATE_TRY_CNT_MSK 0xf000 - -/* Command ID and sequence number of Tx command for this frame */ -#define AGG_TX_STATE_SEQ_NUM_POS 16 -#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000 - -/* - * REPLY_TX = 0x1c (response) - * - * This response may be in one of two slightly different formats, indicated - * by the frame_count field: - * - * 1) No aggregation (frame_count == 1). This reports Tx results for - * a single frame. Multiple attempts, at various bit rates, may have - * been made for this frame. - * - * 2) Aggregation (frame_count > 1). This reports Tx results for - * 2 or more frames that used block-acknowledge. All frames were - * transmitted at same rate. Rate scaling may have been used if first - * frame in this new agg block failed in previous agg block(s). - * - * Note that, for aggregation, ACK (block-ack) status is not delivered here; - * block-ack has not been received by the time the 4965 records this status. - * This status relates to reasons the tx might have been blocked or aborted - * within the sending station (this 4965), rather than whether it was - * received successfully by the destination station. - */ -struct iwl4965_tx_resp { - u8 frame_count; /* 1 no aggregation, >1 aggregation */ - u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */ - u8 failure_rts; /* # failures due to unsuccessful RTS */ - u8 failure_frame; /* # failures due to no ACK (unused for agg) */ - - /* For non-agg: Rate at which frame was successful. - * For agg: Rate at which all frames were transmitted. */ - __le32 rate_n_flags; /* RATE_MCS_* */ - - /* For non-agg: RTS + CTS + frame tx attempts time + ACK. - * For agg: RTS + CTS + aggregation tx time + block-ack time. */ - __le16 wireless_media_time; /* uSecs */ - - __le16 reserved; - __le32 pa_power1; /* RF power amplifier measurement (not used) */ - __le32 pa_power2; - - /* - * For non-agg: frame status TX_STATUS_* - * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status - * fields follow this one, up to frame_count. - * Bit fields: - * 11- 0: AGG_TX_STATE_* status code - * 15-12: Retry count for 1st frame in aggregation (retries - * occur if tx failed for this frame when it was a - * member of a previous aggregation block). If rate - * scaling is used, retry count indicates the rate - * table entry used for all frames in the new agg. - * 31-16: Sequence # for this frame's Tx cmd (not SSN!) - */ - __le32 status; /* TX status (for aggregation status of 1st frame) */ -} __attribute__ ((packed)); - -struct agg_tx_status { - __le16 status; - __le16 sequence; -} __attribute__ ((packed)); - -struct iwl4965_tx_resp_agg { - u8 frame_count; /* 1 no aggregation, >1 aggregation */ - u8 reserved1; - u8 failure_rts; - u8 failure_frame; - __le32 rate_n_flags; - __le16 wireless_media_time; - __le16 reserved3; - __le32 pa_power1; - __le32 pa_power2; - struct agg_tx_status status; /* TX status (for aggregation status */ - /* of 1st frame) */ -} __attribute__ ((packed)); - -/* - * REPLY_COMPRESSED_BA = 0xc5 (response only, not a command) - * - * Reports Block-Acknowledge from recipient station - */ -struct iwl4965_compressed_ba_resp { - __le32 sta_addr_lo32; - __le16 sta_addr_hi16; - __le16 reserved; - - /* Index of recipient (BA-sending) station in uCode's station table */ - u8 sta_id; - u8 tid; - __le16 seq_ctl; - __le64 bitmap; - __le16 scd_flow; - __le16 scd_ssn; -} __attribute__ ((packed)); - -/* - * REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response) - * - * See details under "TXPOWER" in iwl-4965-hw.h. - */ -struct iwl4965_txpowertable_cmd { - u8 band; /* 0: 5 GHz, 1: 2.4 GHz */ - u8 reserved; - __le16 channel; - struct iwl4965_tx_power_db tx_power; -} __attribute__ ((packed)); - -/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */ -#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0) - -/* # of EDCA prioritized tx fifos */ -#define LINK_QUAL_AC_NUM AC_NUM - -/* # entries in rate scale table to support Tx retries */ -#define LINK_QUAL_MAX_RETRY_NUM 16 - -/* Tx antenna selection values */ -#define LINK_QUAL_ANT_A_MSK (1 << 0) -#define LINK_QUAL_ANT_B_MSK (1 << 1) -#define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK) - - -/** - * struct iwl_link_qual_general_params - * - * Used in REPLY_TX_LINK_QUALITY_CMD - */ -struct iwl_link_qual_general_params { - u8 flags; - - /* No entries at or above this (driver chosen) index contain MIMO */ - u8 mimo_delimiter; - - /* Best single antenna to use for single stream (legacy, SISO). */ - u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */ - - /* Best antennas to use for MIMO (unused for 4965, assumes both). */ - u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */ - - /* - * If driver needs to use different initial rates for different - * EDCA QOS access categories (as implemented by tx fifos 0-3), - * this table will set that up, by indicating the indexes in the - * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start. - * Otherwise, driver should set all entries to 0. - * - * Entry usage: - * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice - * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3. - */ - u8 start_rate_index[LINK_QUAL_AC_NUM]; -} __attribute__ ((packed)); - -/** - * struct iwl_link_qual_agg_params - * - * Used in REPLY_TX_LINK_QUALITY_CMD - */ -struct iwl_link_qual_agg_params { - - /* Maximum number of uSec in aggregation. - * Driver should set this to 4000 (4 milliseconds). */ - __le16 agg_time_limit; - - /* - * Number of Tx retries allowed for a frame, before that frame will - * no longer be considered for the start of an aggregation sequence - * (scheduler will then try to tx it as single frame). - * Driver should set this to 3. - */ - u8 agg_dis_start_th; - - /* - * Maximum number of frames in aggregation. - * 0 = no limit (default). 1 = no aggregation. - * Other values = max # frames in aggregation. - */ - u8 agg_frame_cnt_limit; - - __le32 reserved; -} __attribute__ ((packed)); - -/* - * REPLY_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response) - * - * For 4965 only; 3945 uses REPLY_RATE_SCALE. - * - * Each station in the 4965's internal station table has its own table of 16 - * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when - * an ACK is not received. This command replaces the entire table for - * one station. - * - * NOTE: Station must already be in 4965's station table. Use REPLY_ADD_STA. - * - * The rate scaling procedures described below work well. Of course, other - * procedures are possible, and may work better for particular environments. - * - * - * FILLING THE RATE TABLE - * - * Given a particular initial rate and mode, as determined by the rate - * scaling algorithm described below, the Linux driver uses the following - * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the - * Link Quality command: - * - * - * 1) If using High-throughput (HT) (SISO or MIMO) initial rate: - * a) Use this same initial rate for first 3 entries. - * b) Find next lower available rate using same mode (SISO or MIMO), - * use for next 3 entries. If no lower rate available, switch to - * legacy mode (no FAT channel, no MIMO, no short guard interval). - * c) If using MIMO, set command's mimo_delimiter to number of entries - * using MIMO (3 or 6). - * d) After trying 2 HT rates, switch to legacy mode (no FAT channel, - * no MIMO, no short guard interval), at the next lower bit rate - * (e.g. if second HT bit rate was 54, try 48 legacy), and follow - * legacy procedure for remaining table entries. - * - * 2) If using legacy initial rate: - * a) Use the initial rate for only one entry. - * b) For each following entry, reduce the rate to next lower available - * rate, until reaching the lowest available rate. - * c) When reducing rate, also switch antenna selection. - * d) Once lowest available rate is reached, repeat this rate until - * rate table is filled (16 entries), switching antenna each entry. - * - * - * ACCUMULATING HISTORY - * - * The rate scaling algorithm for 4965, as implemented in Linux driver, uses - * two sets of frame Tx success history: One for the current/active modulation - * mode, and one for a speculative/search mode that is being attempted. If the - * speculative mode turns out to be more effective (i.e. actual transfer - * rate is better), then the driver continues to use the speculative mode - * as the new current active mode. - * - * Each history set contains, separately for each possible rate, data for a - * sliding window of the 62 most recent tx attempts at that rate. The data - * includes a shifting bitmap of success(1)/failure(0), and sums of successful - * and attempted frames, from which the driver can additionally calculate a - * success ratio (success / attempted) and number of failures - * (attempted - success), and control the size of the window (attempted). - * The driver uses the bit map to remove successes from the success sum, as - * the oldest tx attempts fall out of the window. - * - * When the 4965 makes multiple tx attempts for a given frame, each attempt - * might be at a different rate, and have different modulation characteristics - * (e.g. antenna, fat channel, short guard interval), as set up in the rate - * scaling table in the Link Quality command. The driver must determine - * which rate table entry was used for each tx attempt, to determine which - * rate-specific history to update, and record only those attempts that - * match the modulation characteristics of the history set. - * - * When using block-ack (aggregation), all frames are transmitted at the same - * rate, since there is no per-attempt acknowledgement from the destination - * station. The Tx response struct iwl_tx_resp indicates the Tx rate in - * rate_n_flags field. After receiving a block-ack, the driver can update - * history for the entire block all at once. - * - * - * FINDING BEST STARTING RATE: - * - * When working with a selected initial modulation mode (see below), the - * driver attempts to find a best initial rate. The initial rate is the - * first entry in the Link Quality command's rate table. - * - * 1) Calculate actual throughput (success ratio * expected throughput, see - * table below) for current initial rate. Do this only if enough frames - * have been attempted to make the value meaningful: at least 6 failed - * tx attempts, or at least 8 successes. If not enough, don't try rate - * scaling yet. - * - * 2) Find available rates adjacent to current initial rate. Available means: - * a) supported by hardware && - * b) supported by association && - * c) within any constraints selected by user - * - * 3) Gather measured throughputs for adjacent rates. These might not have - * enough history to calculate a throughput. That's okay, we might try - * using one of them anyway! - * - * 4) Try decreasing rate if, for current rate: - * a) success ratio is < 15% || - * b) lower adjacent rate has better measured throughput || - * c) higher adjacent rate has worse throughput, and lower is unmeasured - * - * As a sanity check, if decrease was determined above, leave rate - * unchanged if: - * a) lower rate unavailable - * b) success ratio at current rate > 85% (very good) - * c) current measured throughput is better than expected throughput - * of lower rate (under perfect 100% tx conditions, see table below) - * - * 5) Try increasing rate if, for current rate: - * a) success ratio is < 15% || - * b) both adjacent rates' throughputs are unmeasured (try it!) || - * b) higher adjacent rate has better measured throughput || - * c) lower adjacent rate has worse throughput, and higher is unmeasured - * - * As a sanity check, if increase was determined above, leave rate - * unchanged if: - * a) success ratio at current rate < 70%. This is not particularly - * good performance; higher rate is sure to have poorer success. - * - * 6) Re-evaluate the rate after each tx frame. If working with block- - * acknowledge, history and statistics may be calculated for the entire - * block (including prior history that fits within the history windows), - * before re-evaluation. - * - * FINDING BEST STARTING MODULATION MODE: - * - * After working with a modulation mode for a "while" (and doing rate scaling), - * the driver searches for a new initial mode in an attempt to improve - * throughput. The "while" is measured by numbers of attempted frames: - * - * For legacy mode, search for new mode after: - * 480 successful frames, or 160 failed frames - * For high-throughput modes (SISO or MIMO), search for new mode after: - * 4500 successful frames, or 400 failed frames - * - * Mode switch possibilities are (3 for each mode): - * - * For legacy: - * Change antenna, try SISO (if HT association), try MIMO (if HT association) - * For SISO: - * Change antenna, try MIMO, try shortened guard interval (SGI) - * For MIMO: - * Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI) - * - * When trying a new mode, use the same bit rate as the old/current mode when - * trying antenna switches and shortened guard interval. When switching to - * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate - * for which the expected throughput (under perfect conditions) is about the - * same or slightly better than the actual measured throughput delivered by - * the old/current mode. - * - * Actual throughput can be estimated by multiplying the expected throughput - * by the success ratio (successful / attempted tx frames). Frame size is - * not considered in this calculation; it assumes that frame size will average - * out to be fairly consistent over several samples. The following are - * metric values for expected throughput assuming 100% success ratio. - * Only G band has support for CCK rates: - * - * RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60 - * - * G: 7 13 35 58 40 57 72 98 121 154 177 186 186 - * A: 0 0 0 0 40 57 72 98 121 154 177 186 186 - * SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202 - * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211 - * MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251 - * SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257 - * SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257 - * SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264 - * MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289 - * SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293 - * - * After the new mode has been tried for a short while (minimum of 6 failed - * frames or 8 successful frames), compare success ratio and actual throughput - * estimate of the new mode with the old. If either is better with the new - * mode, continue to use the new mode. - * - * Continue comparing modes until all 3 possibilities have been tried. - * If moving from legacy to HT, try all 3 possibilities from the new HT - * mode. After trying all 3, a best mode is found. Continue to use this mode - * for the longer "while" described above (e.g. 480 successful frames for - * legacy), and then repeat the search process. - * - */ -struct iwl_link_quality_cmd { - - /* Index of destination/recipient station in uCode's station table */ - u8 sta_id; - u8 reserved1; - __le16 control; /* not used */ - struct iwl_link_qual_general_params general_params; - struct iwl_link_qual_agg_params agg_params; - - /* - * Rate info; when using rate-scaling, Tx command's initial_rate_index - * specifies 1st Tx rate attempted, via index into this table. - * 4965 works its way through table when retrying Tx. - */ - struct { - __le32 rate_n_flags; /* RATE_MCS_*, IWL_RATE_* */ - } rs_table[LINK_QUAL_MAX_RETRY_NUM]; - __le32 reserved2; -} __attribute__ ((packed)); - -/* - * REPLY_BT_CONFIG = 0x9b (command, has simple generic response) - * - * 3945 and 4965 support hardware handshake with Bluetooth device on - * same platform. Bluetooth device alerts wireless device when it will Tx; - * wireless device can delay or kill its own Tx to accomodate. - */ -struct iwl4965_bt_cmd { - u8 flags; - u8 lead_time; - u8 max_kill; - u8 reserved; - __le32 kill_ack_mask; - __le32 kill_cts_mask; -} __attribute__ ((packed)); - -/****************************************************************************** - * (6) - * Spectrum Management (802.11h) Commands, Responses, Notifications: - * - *****************************************************************************/ - -/* - * Spectrum Management - */ -#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \ - RXON_FILTER_CTL2HOST_MSK | \ - RXON_FILTER_ACCEPT_GRP_MSK | \ - RXON_FILTER_DIS_DECRYPT_MSK | \ - RXON_FILTER_DIS_GRP_DECRYPT_MSK | \ - RXON_FILTER_ASSOC_MSK | \ - RXON_FILTER_BCON_AWARE_MSK) - -struct iwl4965_measure_channel { - __le32 duration; /* measurement duration in extended beacon - * format */ - u8 channel; /* channel to measure */ - u8 type; /* see enum iwl4965_measure_type */ - __le16 reserved; -} __attribute__ ((packed)); - -/* - * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command) - */ -struct iwl4965_spectrum_cmd { - __le16 len; /* number of bytes starting from token */ - u8 token; /* token id */ - u8 id; /* measurement id -- 0 or 1 */ - u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */ - u8 periodic; /* 1 = periodic */ - __le16 path_loss_timeout; - __le32 start_time; /* start time in extended beacon format */ - __le32 reserved2; - __le32 flags; /* rxon flags */ - __le32 filter_flags; /* rxon filter flags */ - __le16 channel_count; /* minimum 1, maximum 10 */ - __le16 reserved3; - struct iwl4965_measure_channel channels[10]; -} __attribute__ ((packed)); - -/* - * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response) - */ -struct iwl4965_spectrum_resp { - u8 token; - u8 id; /* id of the prior command replaced, or 0xff */ - __le16 status; /* 0 - command will be handled - * 1 - cannot handle (conflicts with another - * measurement) */ -} __attribute__ ((packed)); - -enum iwl4965_measurement_state { - IWL_MEASUREMENT_START = 0, - IWL_MEASUREMENT_STOP = 1, -}; - -enum iwl4965_measurement_status { - IWL_MEASUREMENT_OK = 0, - IWL_MEASUREMENT_CONCURRENT = 1, - IWL_MEASUREMENT_CSA_CONFLICT = 2, - IWL_MEASUREMENT_TGH_CONFLICT = 3, - /* 4-5 reserved */ - IWL_MEASUREMENT_STOPPED = 6, - IWL_MEASUREMENT_TIMEOUT = 7, - IWL_MEASUREMENT_PERIODIC_FAILED = 8, -}; - -#define NUM_ELEMENTS_IN_HISTOGRAM 8 - -struct iwl4965_measurement_histogram { - __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */ - __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */ -} __attribute__ ((packed)); - -/* clear channel availability counters */ -struct iwl4965_measurement_cca_counters { - __le32 ofdm; - __le32 cck; -} __attribute__ ((packed)); - -enum iwl4965_measure_type { - IWL_MEASURE_BASIC = (1 << 0), - IWL_MEASURE_CHANNEL_LOAD = (1 << 1), - IWL_MEASURE_HISTOGRAM_RPI = (1 << 2), - IWL_MEASURE_HISTOGRAM_NOISE = (1 << 3), - IWL_MEASURE_FRAME = (1 << 4), - /* bits 5:6 are reserved */ - IWL_MEASURE_IDLE = (1 << 7), -}; - -/* - * SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command) - */ -struct iwl4965_spectrum_notification { - u8 id; /* measurement id -- 0 or 1 */ - u8 token; - u8 channel_index; /* index in measurement channel list */ - u8 state; /* 0 - start, 1 - stop */ - __le32 start_time; /* lower 32-bits of TSF */ - u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */ - u8 channel; - u8 type; /* see enum iwl4965_measurement_type */ - u8 reserved1; - /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only - * valid if applicable for measurement type requested. */ - __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */ - __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */ - __le32 cca_time; /* channel load time in usecs */ - u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 - - * unidentified */ - u8 reserved2[3]; - struct iwl4965_measurement_histogram histogram; - __le32 stop_time; /* lower 32-bits of TSF */ - __le32 status; /* see iwl4965_measurement_status */ -} __attribute__ ((packed)); - -/****************************************************************************** - * (7) - * Power Management Commands, Responses, Notifications: - * - *****************************************************************************/ - -/** - * struct iwl4965_powertable_cmd - Power Table Command - * @flags: See below: - * - * POWER_TABLE_CMD = 0x77 (command, has simple generic response) - * - * PM allow: - * bit 0 - '0' Driver not allow power management - * '1' Driver allow PM (use rest of parameters) - * uCode send sleep notifications: - * bit 1 - '0' Don't send sleep notification - * '1' send sleep notification (SEND_PM_NOTIFICATION) - * Sleep over DTIM - * bit 2 - '0' PM have to walk up every DTIM - * '1' PM could sleep over DTIM till listen Interval. - * PCI power managed - * bit 3 - '0' (PCI_LINK_CTRL & 0x1) - * '1' !(PCI_LINK_CTRL & 0x1) - * Force sleep Modes - * bit 31/30- '00' use both mac/xtal sleeps - * '01' force Mac sleep - * '10' force xtal sleep - * '11' Illegal set - * - * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then - * ucode assume sleep over DTIM is allowed and we don't need to wakeup - * for every DTIM. - */ -#define IWL_POWER_VEC_SIZE 5 - -#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK __constant_cpu_to_le16(1 << 0) -#define IWL_POWER_SLEEP_OVER_DTIM_MSK __constant_cpu_to_le16(1 << 2) -#define IWL_POWER_PCI_PM_MSK __constant_cpu_to_le16(1 << 3) - -struct iwl4965_powertable_cmd { - __le16 flags; - u8 keep_alive_seconds; - u8 debug_flags; - __le32 rx_data_timeout; - __le32 tx_data_timeout; - __le32 sleep_interval[IWL_POWER_VEC_SIZE]; - __le32 keep_alive_beacons; -} __attribute__ ((packed)); - -/* - * PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command) - * 3945 and 4965 identical. - */ -struct iwl4965_sleep_notification { - u8 pm_sleep_mode; - u8 pm_wakeup_src; - __le16 reserved; - __le32 sleep_time; - __le32 tsf_low; - __le32 bcon_timer; -} __attribute__ ((packed)); - -/* Sleep states. 3945 and 4965 identical. */ -enum { - IWL_PM_NO_SLEEP = 0, - IWL_PM_SLP_MAC = 1, - IWL_PM_SLP_FULL_MAC_UNASSOCIATE = 2, - IWL_PM_SLP_FULL_MAC_CARD_STATE = 3, - IWL_PM_SLP_PHY = 4, - IWL_PM_SLP_REPENT = 5, - IWL_PM_WAKEUP_BY_TIMER = 6, - IWL_PM_WAKEUP_BY_DRIVER = 7, - IWL_PM_WAKEUP_BY_RFKILL = 8, - /* 3 reserved */ - IWL_PM_NUM_OF_MODES = 12, -}; - -/* - * REPLY_CARD_STATE_CMD = 0xa0 (command, has simple generic response) - */ -#define CARD_STATE_CMD_DISABLE 0x00 /* Put card to sleep */ -#define CARD_STATE_CMD_ENABLE 0x01 /* Wake up card */ -#define CARD_STATE_CMD_HALT 0x02 /* Power down permanently */ -struct iwl4965_card_state_cmd { - __le32 status; /* CARD_STATE_CMD_* request new power state */ -} __attribute__ ((packed)); - -/* - * CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command) - */ -struct iwl4965_card_state_notif { - __le32 flags; -} __attribute__ ((packed)); - -#define HW_CARD_DISABLED 0x01 -#define SW_CARD_DISABLED 0x02 -#define RF_CARD_DISABLED 0x04 -#define RXON_CARD_DISABLED 0x10 - -struct iwl4965_ct_kill_config { - __le32 reserved; - __le32 critical_temperature_M; - __le32 critical_temperature_R; -} __attribute__ ((packed)); - -/****************************************************************************** - * (8) - * Scan Commands, Responses, Notifications: - * - *****************************************************************************/ - -/** - * struct iwl4965_scan_channel - entry in REPLY_SCAN_CMD channel table - * - * One for each channel in the scan list. - * Each channel can independently select: - * 1) SSID for directed active scans - * 2) Txpower setting (for rate specified within Tx command) - * 3) How long to stay on-channel (behavior may be modified by quiet_time, - * quiet_plcp_th, good_CRC_th) - * - * To avoid uCode errors, make sure the following are true (see comments - * under struct iwl4965_scan_cmd about max_out_time and quiet_time): - * 1) If using passive_dwell (i.e. passive_dwell != 0): - * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) - * 2) quiet_time <= active_dwell - * 3) If restricting off-channel time (i.e. max_out_time !=0): - * passive_dwell < max_out_time - * active_dwell < max_out_time - */ -struct iwl4965_scan_channel { - /* - * type is defined as: - * 0:0 1 = active, 0 = passive - * 1:4 SSID direct bit map; if a bit is set, then corresponding - * SSID IE is transmitted in probe request. - * 5:7 reserved - */ - u8 type; - u8 channel; /* band is selected by iwl4965_scan_cmd "flags" field */ - struct iwl4965_tx_power tpc; - __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ - __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ -} __attribute__ ((packed)); - -/** - * struct iwl4965_ssid_ie - directed scan network information element - * - * Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field - * in struct iwl4965_scan_channel; each channel may select different ssids from - * among the 4 entries. SSID IEs get transmitted in reverse order of entry. - */ -struct iwl4965_ssid_ie { - u8 id; - u8 len; - u8 ssid[32]; -} __attribute__ ((packed)); - -#define PROBE_OPTION_MAX 0x4 -#define TX_CMD_LIFE_TIME_INFINITE __constant_cpu_to_le32(0xFFFFFFFF) -#define IWL_GOOD_CRC_TH __constant_cpu_to_le16(1) -#define IWL_MAX_SCAN_SIZE 1024 - -/* - * REPLY_SCAN_CMD = 0x80 (command) - * - * The hardware scan command is very powerful; the driver can set it up to - * maintain (relatively) normal network traffic while doing a scan in the - * background. The max_out_time and suspend_time control the ratio of how - * long the device stays on an associated network channel ("service channel") - * vs. how long it's away from the service channel, i.e. tuned to other channels - * for scanning. - * - * max_out_time is the max time off-channel (in usec), and suspend_time - * is how long (in "extended beacon" format) that the scan is "suspended" - * after returning to the service channel. That is, suspend_time is the - * time that we stay on the service channel, doing normal work, between - * scan segments. The driver may set these parameters differently to support - * scanning when associated vs. not associated, and light vs. heavy traffic - * loads when associated. - * - * After receiving this command, the device's scan engine does the following; - * - * 1) Sends SCAN_START notification to driver - * 2) Checks to see if it has time to do scan for one channel - * 3) Sends NULL packet, with power-save (PS) bit set to 1, - * to tell AP that we're going off-channel - * 4) Tunes to first channel in scan list, does active or passive scan - * 5) Sends SCAN_RESULT notification to driver - * 6) Checks to see if it has time to do scan on *next* channel in list - * 7) Repeats 4-6 until it no longer has time to scan the next channel - * before max_out_time expires - * 8) Returns to service channel - * 9) Sends NULL packet with PS=0 to tell AP that we're back - * 10) Stays on service channel until suspend_time expires - * 11) Repeats entire process 2-10 until list is complete - * 12) Sends SCAN_COMPLETE notification - * - * For fast, efficient scans, the scan command also has support for staying on - * a channel for just a short time, if doing active scanning and getting no - * responses to the transmitted probe request. This time is controlled by - * quiet_time, and the number of received packets below which a channel is - * considered "quiet" is controlled by quiet_plcp_threshold. - * - * For active scanning on channels that have regulatory restrictions against - * blindly transmitting, the scan can listen before transmitting, to make sure - * that there is already legitimate activity on the channel. If enough - * packets are cleanly received on the channel (controlled by good_CRC_th, - * typical value 1), the scan engine starts transmitting probe requests. - * - * Driver must use separate scan commands for 2.4 vs. 5 GHz bands. - * - * To avoid uCode errors, see timing restrictions described under - * struct iwl4965_scan_channel. - */ -struct iwl4965_scan_cmd { - __le16 len; - u8 reserved0; - u8 channel_count; /* # channels in channel list */ - __le16 quiet_time; /* dwell only this # millisecs on quiet channel - * (only for active scan) */ - __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ - __le16 good_CRC_th; /* passive -> active promotion threshold */ - __le16 rx_chain; /* RXON_RX_CHAIN_* */ - __le32 max_out_time; /* max usec to be away from associated (service) - * channel */ - __le32 suspend_time; /* pause scan this long (in "extended beacon - * format") when returning to service chnl: - * 3945; 31:24 # beacons, 19:0 additional usec, - * 4965; 31:22 # beacons, 21:0 additional usec. - */ - __le32 flags; /* RXON_FLG_* */ - __le32 filter_flags; /* RXON_FILTER_* */ - - /* For active scans (set to all-0s for passive scans). - * Does not include payload. Must specify Tx rate; no rate scaling. */ - struct iwl4965_tx_cmd tx_cmd; - - /* For directed active scans (set to all-0s otherwise) */ - struct iwl4965_ssid_ie direct_scan[PROBE_OPTION_MAX]; - - /* - * Probe request frame, followed by channel list. - * - * Size of probe request frame is specified by byte count in tx_cmd. - * Channel list follows immediately after probe request frame. - * Number of channels in list is specified by channel_count. - * Each channel in list is of type: - * - * struct iwl4965_scan_channel channels[0]; - * - * NOTE: Only one band of channels can be scanned per pass. You - * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait - * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION) - * before requesting another scan. - */ - u8 data[0]; -} __attribute__ ((packed)); - -/* Can abort will notify by complete notification with abort status. */ -#define CAN_ABORT_STATUS __constant_cpu_to_le32(0x1) -/* complete notification statuses */ -#define ABORT_STATUS 0x2 - -/* - * REPLY_SCAN_CMD = 0x80 (response) - */ -struct iwl4965_scanreq_notification { - __le32 status; /* 1: okay, 2: cannot fulfill request */ -} __attribute__ ((packed)); - -/* - * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command) - */ -struct iwl4965_scanstart_notification { - __le32 tsf_low; - __le32 tsf_high; - __le32 beacon_timer; - u8 channel; - u8 band; - u8 reserved[2]; - __le32 status; -} __attribute__ ((packed)); - -#define SCAN_OWNER_STATUS 0x1; -#define MEASURE_OWNER_STATUS 0x2; - -#define NUMBER_OF_STATISTICS 1 /* first __le32 is good CRC */ -/* - * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command) - */ -struct iwl4965_scanresults_notification { - u8 channel; - u8 band; - u8 reserved[2]; - __le32 tsf_low; - __le32 tsf_high; - __le32 statistics[NUMBER_OF_STATISTICS]; -} __attribute__ ((packed)); - -/* - * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command) - */ -struct iwl4965_scancomplete_notification { - u8 scanned_channels; - u8 status; - u8 reserved; - u8 last_channel; - __le32 tsf_low; - __le32 tsf_high; -} __attribute__ ((packed)); - - -/****************************************************************************** - * (9) - * IBSS/AP Commands and Notifications: - * - *****************************************************************************/ - -/* - * BEACON_NOTIFICATION = 0x90 (notification only, not a command) - */ -struct iwl4965_beacon_notif { - struct iwl4965_tx_resp beacon_notify_hdr; - __le32 low_tsf; - __le32 high_tsf; - __le32 ibss_mgr_status; -} __attribute__ ((packed)); - -/* - * REPLY_TX_BEACON = 0x91 (command, has simple generic response) - */ -struct iwl4965_tx_beacon_cmd { - struct iwl4965_tx_cmd tx; - __le16 tim_idx; - u8 tim_size; - u8 reserved1; - struct ieee80211_hdr frame[0]; /* beacon frame */ -} __attribute__ ((packed)); - -/****************************************************************************** - * (10) - * Statistics Commands and Notifications: - * - *****************************************************************************/ - -#define IWL_TEMP_CONVERT 260 - -#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 -#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 -#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 - -/* Used for passing to driver number of successes and failures per rate */ -struct rate_histogram { - union { - __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; - __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; - __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; - } success; - union { - __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; - __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; - __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; - } failed; -} __attribute__ ((packed)); - -/* statistics command response */ - -struct statistics_rx_phy { - __le32 ina_cnt; - __le32 fina_cnt; - __le32 plcp_err; - __le32 crc32_err; - __le32 overrun_err; - __le32 early_overrun_err; - __le32 crc32_good; - __le32 false_alarm_cnt; - __le32 fina_sync_err_cnt; - __le32 sfd_timeout; - __le32 fina_timeout; - __le32 unresponded_rts; - __le32 rxe_frame_limit_overrun; - __le32 sent_ack_cnt; - __le32 sent_cts_cnt; - __le32 sent_ba_rsp_cnt; - __le32 dsp_self_kill; - __le32 mh_format_err; - __le32 re_acq_main_rssi_sum; - __le32 reserved3; -} __attribute__ ((packed)); - -struct statistics_rx_ht_phy { - __le32 plcp_err; - __le32 overrun_err; - __le32 early_overrun_err; - __le32 crc32_good; - __le32 crc32_err; - __le32 mh_format_err; - __le32 agg_crc32_good; - __le32 agg_mpdu_cnt; - __le32 agg_cnt; - __le32 reserved2; -} __attribute__ ((packed)); - -struct statistics_rx_non_phy { - __le32 bogus_cts; /* CTS received when not expecting CTS */ - __le32 bogus_ack; /* ACK received when not expecting ACK */ - __le32 non_bssid_frames; /* number of frames with BSSID that - * doesn't belong to the STA BSSID */ - __le32 filtered_frames; /* count frames that were dumped in the - * filtering process */ - __le32 non_channel_beacons; /* beacons with our bss id but not on - * our serving channel */ - __le32 channel_beacons; /* beacons with our bss id and in our - * serving channel */ - __le32 num_missed_bcon; /* number of missed beacons */ - __le32 adc_rx_saturation_time; /* count in 0.8us units the time the - * ADC was in saturation */ - __le32 ina_detection_search_time;/* total time (in 0.8us) searched - * for INA */ - __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */ - __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */ - __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */ - __le32 interference_data_flag; /* flag for interference data - * availability. 1 when data is - * available. */ - __le32 channel_load; /* counts RX Enable time in uSec */ - __le32 dsp_false_alarms; /* DSP false alarm (both OFDM - * and CCK) counter */ - __le32 beacon_rssi_a; - __le32 beacon_rssi_b; - __le32 beacon_rssi_c; - __le32 beacon_energy_a; - __le32 beacon_energy_b; - __le32 beacon_energy_c; -} __attribute__ ((packed)); - -struct statistics_rx { - struct statistics_rx_phy ofdm; - struct statistics_rx_phy cck; - struct statistics_rx_non_phy general; - struct statistics_rx_ht_phy ofdm_ht; -} __attribute__ ((packed)); - -struct statistics_tx_non_phy_agg { - __le32 ba_timeout; - __le32 ba_reschedule_frames; - __le32 scd_query_agg_frame_cnt; - __le32 scd_query_no_agg; - __le32 scd_query_agg; - __le32 scd_query_mismatch; - __le32 frame_not_ready; - __le32 underrun; - __le32 bt_prio_kill; - __le32 rx_ba_rsp_cnt; - __le32 reserved2; - __le32 reserved3; -} __attribute__ ((packed)); - -struct statistics_tx { - __le32 preamble_cnt; - __le32 rx_detected_cnt; - __le32 bt_prio_defer_cnt; - __le32 bt_prio_kill_cnt; - __le32 few_bytes_cnt; - __le32 cts_timeout; - __le32 ack_timeout; - __le32 expected_ack_cnt; - __le32 actual_ack_cnt; - __le32 dump_msdu_cnt; - __le32 burst_abort_next_frame_mismatch_cnt; - __le32 burst_abort_missing_next_frame_cnt; - __le32 cts_timeout_collision; - __le32 ack_or_ba_timeout_collision; - struct statistics_tx_non_phy_agg agg; -} __attribute__ ((packed)); - -struct statistics_dbg { - __le32 burst_check; - __le32 burst_count; - __le32 reserved[4]; -} __attribute__ ((packed)); - -struct statistics_div { - __le32 tx_on_a; - __le32 tx_on_b; - __le32 exec_time; - __le32 probe_time; - __le32 reserved1; - __le32 reserved2; -} __attribute__ ((packed)); - -struct statistics_general { - __le32 temperature; - __le32 temperature_m; - struct statistics_dbg dbg; - __le32 sleep_time; - __le32 slots_out; - __le32 slots_idle; - __le32 ttl_timestamp; - struct statistics_div div; - __le32 rx_enable_counter; - __le32 reserved1; - __le32 reserved2; - __le32 reserved3; -} __attribute__ ((packed)); - -/* - * REPLY_STATISTICS_CMD = 0x9c, - * 3945 and 4965 identical. - * - * This command triggers an immediate response containing uCode statistics. - * The response is in the same format as STATISTICS_NOTIFICATION 0x9d, below. - * - * If the CLEAR_STATS configuration flag is set, uCode will clear its - * internal copy of the statistics (counters) after issuing the response. - * This flag does not affect STATISTICS_NOTIFICATIONs after beacons (see below). - * - * If the DISABLE_NOTIF configuration flag is set, uCode will not issue - * STATISTICS_NOTIFICATIONs after received beacons (see below). This flag - * does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself. - */ -#define IWL_STATS_CONF_CLEAR_STATS __constant_cpu_to_le32(0x1) /* see above */ -#define IWL_STATS_CONF_DISABLE_NOTIF __constant_cpu_to_le32(0x2)/* see above */ -struct iwl4965_statistics_cmd { - __le32 configuration_flags; /* IWL_STATS_CONF_* */ -} __attribute__ ((packed)); - -/* - * STATISTICS_NOTIFICATION = 0x9d (notification only, not a command) - * - * By default, uCode issues this notification after receiving a beacon - * while associated. To disable this behavior, set DISABLE_NOTIF flag in the - * REPLY_STATISTICS_CMD 0x9c, above. - * - * Statistics counters continue to increment beacon after beacon, but are - * cleared when changing channels or when driver issues REPLY_STATISTICS_CMD - * 0x9c with CLEAR_STATS bit set (see above). - * - * uCode also issues this notification during scans. uCode clears statistics - * appropriately so that each notification contains statistics for only the - * one channel that has just been scanned. - */ -#define STATISTICS_REPLY_FLG_BAND_24G_MSK __constant_cpu_to_le32(0x2) -#define STATISTICS_REPLY_FLG_FAT_MODE_MSK __constant_cpu_to_le32(0x8) -struct iwl4965_notif_statistics { - __le32 flag; - struct statistics_rx rx; - struct statistics_tx tx; - struct statistics_general general; -} __attribute__ ((packed)); - - -/* - * MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command) - */ -/* if ucode missed CONSECUTIVE_MISSED_BCONS_TH beacons in a row, - * then this notification will be sent. */ -#define CONSECUTIVE_MISSED_BCONS_TH 20 - -struct iwl4965_missed_beacon_notif { - __le32 consequtive_missed_beacons; - __le32 total_missed_becons; - __le32 num_expected_beacons; - __le32 num_recvd_beacons; -} __attribute__ ((packed)); - - -/****************************************************************************** - * (11) - * Rx Calibration Commands: - * - * With the uCode used for open source drivers, most Tx calibration (except - * for Tx Power) and most Rx calibration is done by uCode during the - * "initialize" phase of uCode boot. Driver must calibrate only: - * - * 1) Tx power (depends on temperature), described elsewhere - * 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas) - * 3) Receiver sensitivity (to optimize signal detection) - * - *****************************************************************************/ - -/** - * SENSITIVITY_CMD = 0xa8 (command, has simple generic response) - * - * This command sets up the Rx signal detector for a sensitivity level that - * is high enough to lock onto all signals within the associated network, - * but low enough to ignore signals that are below a certain threshold, so as - * not to have too many "false alarms". False alarms are signals that the - * Rx DSP tries to lock onto, but then discards after determining that they - * are noise. - * - * The optimum number of false alarms is between 5 and 50 per 200 TUs - * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e. - * time listening, not transmitting). Driver must adjust sensitivity so that - * the ratio of actual false alarms to actual Rx time falls within this range. - * - * While associated, uCode delivers STATISTICS_NOTIFICATIONs after each - * received beacon. These provide information to the driver to analyze the - * sensitivity. Don't analyze statistics that come in from scanning, or any - * other non-associated-network source. Pertinent statistics include: - * - * From "general" statistics (struct statistics_rx_non_phy): - * - * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level) - * Measure of energy of desired signal. Used for establishing a level - * below which the device does not detect signals. - * - * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB) - * Measure of background noise in silent period after beacon. - * - * channel_load - * uSecs of actual Rx time during beacon period (varies according to - * how much time was spent transmitting). - * - * From "cck" and "ofdm" statistics (struct statistics_rx_phy), separately: - * - * false_alarm_cnt - * Signal locks abandoned early (before phy-level header). - * - * plcp_err - * Signal locks abandoned late (during phy-level header). - * - * NOTE: Both false_alarm_cnt and plcp_err increment monotonically from - * beacon to beacon, i.e. each value is an accumulation of all errors - * before and including the latest beacon. Values will wrap around to 0 - * after counting up to 2^32 - 1. Driver must differentiate vs. - * previous beacon's values to determine # false alarms in the current - * beacon period. - * - * Total number of false alarms = false_alarms + plcp_errs - * - * For OFDM, adjust the following table entries in struct iwl_sensitivity_cmd - * (notice that the start points for OFDM are at or close to settings for - * maximum sensitivity): - * - * START / MIN / MAX - * HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX 90 / 85 / 120 - * HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX 170 / 170 / 210 - * HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX 105 / 105 / 140 - * HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX 220 / 220 / 270 - * - * If actual rate of OFDM false alarms (+ plcp_errors) is too high - * (greater than 50 for each 204.8 msecs listening), reduce sensitivity - * by *adding* 1 to all 4 of the table entries above, up to the max for - * each entry. Conversely, if false alarm rate is too low (less than 5 - * for each 204.8 msecs listening), *subtract* 1 from each entry to - * increase sensitivity. - * - * For CCK sensitivity, keep track of the following: - * - * 1). 20-beacon history of maximum background noise, indicated by - * (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the - * 3 receivers. For any given beacon, the "silence reference" is - * the maximum of last 60 samples (20 beacons * 3 receivers). - * - * 2). 10-beacon history of strongest signal level, as indicated - * by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers, - * i.e. the strength of the signal through the best receiver at the - * moment. These measurements are "upside down", with lower values - * for stronger signals, so max energy will be *minimum* value. - * - * Then for any given beacon, the driver must determine the *weakest* - * of the strongest signals; this is the minimum level that needs to be - * successfully detected, when using the best receiver at the moment. - * "Max cck energy" is the maximum (higher value means lower energy!) - * of the last 10 minima. Once this is determined, driver must add - * a little margin by adding "6" to it. - * - * 3). Number of consecutive beacon periods with too few false alarms. - * Reset this to 0 at the first beacon period that falls within the - * "good" range (5 to 50 false alarms per 204.8 milliseconds rx). - * - * Then, adjust the following CCK table entries in struct iwl_sensitivity_cmd - * (notice that the start points for CCK are at maximum sensitivity): - * - * START / MIN / MAX - * HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX 125 / 125 / 200 - * HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX 200 / 200 / 400 - * HD_MIN_ENERGY_CCK_DET_INDEX 100 / 0 / 100 - * - * If actual rate of CCK false alarms (+ plcp_errors) is too high - * (greater than 50 for each 204.8 msecs listening), method for reducing - * sensitivity is: - * - * 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX, - * up to max 400. - * - * 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is < 160, - * sensitivity has been reduced a significant amount; bring it up to - * a moderate 161. Otherwise, *add* 3, up to max 200. - * - * 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is > 160, - * sensitivity has been reduced only a moderate or small amount; - * *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_INDEX, - * down to min 0. Otherwise (if gain has been significantly reduced), - * don't change the HD_MIN_ENERGY_CCK_DET_INDEX value. - * - * b) Save a snapshot of the "silence reference". - * - * If actual rate of CCK false alarms (+ plcp_errors) is too low - * (less than 5 for each 204.8 msecs listening), method for increasing - * sensitivity is used only if: - * - * 1a) Previous beacon did not have too many false alarms - * 1b) AND difference between previous "silence reference" and current - * "silence reference" (prev - current) is 2 or more, - * OR 2) 100 or more consecutive beacon periods have had rate of - * less than 5 false alarms per 204.8 milliseconds rx time. - * - * Method for increasing sensitivity: - * - * 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX, - * down to min 125. - * - * 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX, - * down to min 200. - * - * 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_INDEX, up to max 100. - * - * If actual rate of CCK false alarms (+ plcp_errors) is within good range - * (between 5 and 50 for each 204.8 msecs listening): - * - * 1) Save a snapshot of the silence reference. - * - * 2) If previous beacon had too many CCK false alarms (+ plcp_errors), - * give some extra margin to energy threshold by *subtracting* 8 - * from value in HD_MIN_ENERGY_CCK_DET_INDEX. - * - * For all cases (too few, too many, good range), make sure that the CCK - * detection threshold (energy) is below the energy level for robust - * detection over the past 10 beacon periods, the "Max cck energy". - * Lower values mean higher energy; this means making sure that the value - * in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy". - * - * Driver should set the following entries to fixed values: - * - * HD_MIN_ENERGY_OFDM_DET_INDEX 100 - * HD_BARKER_CORR_TH_ADD_MIN_INDEX 190 - * HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX 390 - * HD_OFDM_ENERGY_TH_IN_INDEX 62 - */ - -/* - * Table entries in SENSITIVITY_CMD (struct iwl4965_sensitivity_cmd) - */ -#define HD_TABLE_SIZE (11) /* number of entries */ -#define HD_MIN_ENERGY_CCK_DET_INDEX (0) /* table indexes */ -#define HD_MIN_ENERGY_OFDM_DET_INDEX (1) -#define HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX (2) -#define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX (3) -#define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX (4) -#define HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX (5) -#define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX (6) -#define HD_BARKER_CORR_TH_ADD_MIN_INDEX (7) -#define HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX (8) -#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9) -#define HD_OFDM_ENERGY_TH_IN_INDEX (10) - -/* Control field in struct iwl4965_sensitivity_cmd */ -#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE __constant_cpu_to_le16(0) -#define SENSITIVITY_CMD_CONTROL_WORK_TABLE __constant_cpu_to_le16(1) - -/** - * struct iwl4965_sensitivity_cmd - * @control: (1) updates working table, (0) updates default table - * @table: energy threshold values, use HD_* as index into table - * - * Always use "1" in "control" to update uCode's working table and DSP. - */ -struct iwl4965_sensitivity_cmd { - __le16 control; /* always use "1" */ - __le16 table[HD_TABLE_SIZE]; /* use HD_* as index */ -} __attribute__ ((packed)); - - -/** - * REPLY_PHY_CALIBRATION_CMD = 0xb0 (command, has simple generic response) - * - * This command sets the relative gains of 4965's 3 radio receiver chains. - * - * After the first association, driver should accumulate signal and noise - * statistics from the STATISTICS_NOTIFICATIONs that follow the first 20 - * beacons from the associated network (don't collect statistics that come - * in from scanning, or any other non-network source). - * - * DISCONNECTED ANTENNA: - * - * Driver should determine which antennas are actually connected, by comparing - * average beacon signal levels for the 3 Rx chains. Accumulate (add) the - * following values over 20 beacons, one accumulator for each of the chains - * a/b/c, from struct statistics_rx_non_phy: - * - * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB) - * - * Find the strongest signal from among a/b/c. Compare the other two to the - * strongest. If any signal is more than 15 dB (times 20, unless you - * divide the accumulated values by 20) below the strongest, the driver - * considers that antenna to be disconnected, and should not try to use that - * antenna/chain for Rx or Tx. If both A and B seem to be disconnected, - * driver should declare the stronger one as connected, and attempt to use it - * (A and B are the only 2 Tx chains!). - * - * - * RX BALANCE: - * - * Driver should balance the 3 receivers (but just the ones that are connected - * to antennas, see above) for gain, by comparing the average signal levels - * detected during the silence after each beacon (background noise). - * Accumulate (add) the following values over 20 beacons, one accumulator for - * each of the chains a/b/c, from struct statistics_rx_non_phy: - * - * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB) - * - * Find the weakest background noise level from among a/b/c. This Rx chain - * will be the reference, with 0 gain adjustment. Attenuate other channels by - * finding noise difference: - * - * (accum_noise[i] - accum_noise[reference]) / 30 - * - * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB. - * For use in diff_gain_[abc] fields of struct iwl_calibration_cmd, the - * driver should limit the difference results to a range of 0-3 (0-4.5 dB), - * and set bit 2 to indicate "reduce gain". The value for the reference - * (weakest) chain should be "0". - * - * diff_gain_[abc] bit fields: - * 2: (1) reduce gain, (0) increase gain - * 1-0: amount of gain, units of 1.5 dB - */ - -/* "Differential Gain" opcode used in REPLY_PHY_CALIBRATION_CMD. */ -#define PHY_CALIBRATE_DIFF_GAIN_CMD (7) - -struct iwl4965_calibration_cmd { - u8 opCode; /* PHY_CALIBRATE_DIFF_GAIN_CMD (7) */ - u8 flags; /* not used */ - __le16 reserved; - s8 diff_gain_a; /* see above */ - s8 diff_gain_b; - s8 diff_gain_c; - u8 reserved1; -} __attribute__ ((packed)); - -/****************************************************************************** - * (12) - * Miscellaneous Commands: - * - *****************************************************************************/ - -/* - * LEDs Command & Response - * REPLY_LEDS_CMD = 0x48 (command, has simple generic response) - * - * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field), - * this command turns it on or off, or sets up a periodic blinking cycle. - */ -struct iwl4965_led_cmd { - __le32 interval; /* "interval" in uSec */ - u8 id; /* 1: Activity, 2: Link, 3: Tech */ - u8 off; /* # intervals off while blinking; - * "0", with >0 "on" value, turns LED on */ - u8 on; /* # intervals on while blinking; - * "0", regardless of "off", turns LED off */ - u8 reserved; -} __attribute__ ((packed)); - -/****************************************************************************** - * (13) - * Union of all expected notifications/responses: - * - *****************************************************************************/ - -struct iwl4965_rx_packet { - __le32 len; - struct iwl_cmd_header hdr; - union { - struct iwl4965_alive_resp alive_frame; - struct iwl4965_rx_frame rx_frame; - struct iwl4965_tx_resp tx_resp; - struct iwl4965_spectrum_notification spectrum_notif; - struct iwl4965_csa_notification csa_notif; - struct iwl4965_error_resp err_resp; - struct iwl4965_card_state_notif card_state_notif; - struct iwl4965_beacon_notif beacon_status; - struct iwl4965_add_sta_resp add_sta; - struct iwl4965_sleep_notification sleep_notif; - struct iwl4965_spectrum_resp spectrum; - struct iwl4965_notif_statistics stats; - struct iwl4965_compressed_ba_resp compressed_ba; - struct iwl4965_missed_beacon_notif missed_beacon; - __le32 status; - u8 raw[0]; - } u; -} __attribute__ ((packed)); - -#define IWL_RX_FRAME_SIZE (4 + sizeof(struct iwl4965_rx_frame)) - -#endif /* __iwl4965_commands_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index 1a66b50..f4793a6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -62,13 +62,18 @@ *****************************************************************************/ /* * Please use this file (iwl-4965-hw.h) only for hardware-related definitions. - * Use iwl-4965-commands.h for uCode API definitions. - * Use iwl-4965.h for driver implementation definitions. + * Use iwl-commands.h for uCode API definitions. + * Use iwl-dev.h for driver implementation definitions. */ #ifndef __iwl_4965_hw_h__ #define __iwl_4965_hw_h__ +#include "iwl-fh.h" + +/* EERPROM */ +#define IWL4965_EEPROM_IMG_SIZE 1024 + /* * uCode queue management definitions ... * Queue #4 is the command queue for 3945 and 4965; map it to Tx FIFO chnl 4. @@ -77,7 +82,7 @@ */ #define IWL_CMD_QUEUE_NUM 4 #define IWL_CMD_FIFO_NUM 4 -#define IWL_BACK_QUEUE_FIRST_ID 7 +#define IWL49_FIRST_AMPDU_QUEUE 7 /* Tx rates */ #define IWL_CCK_RATES 4 @@ -93,11 +98,17 @@ #define IWL_RSSI_OFFSET 44 -#include "iwl-4965-commands.h" -#define PCI_LINK_CTRL 0x0F0 -#define PCI_POWER_SOURCE 0x0C8 -#define PCI_REG_WUM8 0x0E8 +/* PCI registers */ +#define PCI_CFG_RETRY_TIMEOUT 0x041 +#define PCI_CFG_POWER_SOURCE 0x0C8 +#define PCI_REG_WUM8 0x0E8 +#define PCI_CFG_LINK_CTRL 0x0F0 + +/* PCI register values */ +#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01 +#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02 +#define PCI_CFG_CMD_REG_INT_DIS_MSK 0x04 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000) #define TFD_QUEUE_SIZE_MAX (256) @@ -131,10 +142,8 @@ #define RTC_DATA_LOWER_BOUND (0x800000) #define IWL49_RTC_DATA_UPPER_BOUND (0x80A000) -#define IWL49_RTC_INST_SIZE \ - (IWL49_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND) -#define IWL49_RTC_DATA_SIZE \ - (IWL49_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND) +#define IWL49_RTC_INST_SIZE (IWL49_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND) +#define IWL49_RTC_DATA_SIZE (IWL49_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND) #define IWL_MAX_INST_SIZE IWL49_RTC_INST_SIZE #define IWL_MAX_DATA_SIZE IWL49_RTC_DATA_SIZE @@ -785,585 +794,6 @@ enum { /********************* END TXPOWER *****************************************/ -/****************************/ -/* Flow Handler Definitions */ -/****************************/ - -/** - * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) - * Addresses are offsets from device's PCI hardware base address. - */ -#define FH_MEM_LOWER_BOUND (0x1000) -#define FH_MEM_UPPER_BOUND (0x1EF0) - -/** - * Keep-Warm (KW) buffer base address. - * - * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the - * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency - * DRAM access when 4965 is Txing or Rxing. The dummy accesses prevent host - * from going into a power-savings mode that would cause higher DRAM latency, - * and possible data over/under-runs, before all Tx/Rx is complete. - * - * Driver loads IWL_FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) - * of the buffer, which must be 4K aligned. Once this is set up, the 4965 - * automatically invokes keep-warm accesses when normal accesses might not - * be sufficient to maintain fast DRAM response. - * - * Bit fields: - * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned - */ -#define IWL_FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) - - -/** - * TFD Circular Buffers Base (CBBC) addresses - * - * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident - * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) - * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 - * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte - * aligned (address bits 0-7 must be 0). - * - * Bit fields in each pointer register: - * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned - */ -#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) - -/* Find TFD CB base pointer for given queue (range 0-15). */ -#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) - - -/** - * Rx SRAM Control and Status Registers (RSCSR) - * - * These registers provide handshake between driver and 4965 for the Rx queue - * (this queue handles *all* command responses, notifications, Rx data, etc. - * sent from 4965 uCode to host driver). Unlike Tx, there is only one Rx - * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can - * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer - * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 - * mapping between RBDs and RBs. - * - * Driver must allocate host DRAM memory for the following, and set the - * physical address of each into 4965 registers: - * - * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 - * entries (although any power of 2, up to 4096, is selectable by driver). - * Each entry (1 dword) points to a receive buffer (RB) of consistent size - * (typically 4K, although 8K or 16K are also selectable by driver). - * Driver sets up RB size and number of RBDs in the CB via Rx config - * register FH_MEM_RCSR_CHNL0_CONFIG_REG. - * - * Bit fields within one RBD: - * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned - * - * Driver sets physical address [35:8] of base of RBD circular buffer - * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. - * - * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers - * (RBs) have been filled, via a "write pointer", actually the index of - * the RB's corresponding RBD within the circular buffer. Driver sets - * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. - * - * Bit fields in lower dword of Rx status buffer (upper dword not used - * by driver; see struct iwl4965_shared, val0): - * 31-12: Not used by driver - * 11- 0: Index of last filled Rx buffer descriptor - * (4965 writes, driver reads this value) - * - * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must - * enter pointers to these RBs into contiguous RBD circular buffer entries, - * and update the 4965's "write" index register, FH_RSCSR_CHNL0_RBDCB_WPTR_REG. - * - * This "write" index corresponds to the *next* RBD that the driver will make - * available, i.e. one RBD past the tail of the ready-to-fill RBDs within - * the circular buffer. This value should initially be 0 (before preparing any - * RBs), should be 8 after preparing the first 8 RBs (for example), and must - * wrap back to 0 at the end of the circular buffer (but don't wrap before - * "read" index has advanced past 1! See below). - * NOTE: 4965 EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. - * - * As the 4965 fills RBs (referenced from contiguous RBDs within the circular - * buffer), it updates the Rx status buffer in host DRAM, 2) described above, - * to tell the driver the index of the latest filled RBD. The driver must - * read this "read" index from DRAM after receiving an Rx interrupt from 4965. - * - * The driver must also internally keep track of a third index, which is the - * next RBD to process. When receiving an Rx interrupt, driver should process - * all filled but unprocessed RBs up to, but not including, the RB - * corresponding to the "read" index. For example, if "read" index becomes "1", - * driver may process the RB pointed to by RBD 0. Depending on volume of - * traffic, there may be many RBs to process. - * - * If read index == write index, 4965 thinks there is no room to put new data. - * Due to this, the maximum number of filled RBs is 255, instead of 256. To - * be safe, make sure that there is a gap of at least 2 RBDs between "write" - * and "read" indexes; that is, make sure that there are no more than 254 - * buffers waiting to be filled. - */ -#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) -#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) - -/** - * Physical base address of 8-byte Rx Status buffer. - * Bit fields: - * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. - */ -#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) - -/** - * Physical base address of Rx Buffer Descriptor Circular Buffer. - * Bit fields: - * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. - */ -#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) - -/** - * Rx write pointer (index, really!). - * Bit fields: - * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. - * NOTE: For 256-entry circular buffer, use only bits [7:0]. - */ -#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) -#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) - - -/** - * Rx Config/Status Registers (RCSR) - * Rx Config Reg for channel 0 (only channel used) - * - * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for - * normal operation (see bit fields). - * - * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. - * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for - * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. - * - * Bit fields: - * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, - * '10' operate normally - * 29-24: reserved - * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), - * min "5" for 32 RBDs, max "12" for 4096 RBDs. - * 19-18: reserved - * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, - * '10' 12K, '11' 16K. - * 15-14: reserved - * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) - * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) - * typical value 0x10 (about 1/2 msec) - * 3- 0: reserved - */ -#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) -#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) - -#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) - -#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MASK (0x00000FF0) /* bit 4-11 */ -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MASK (0x00001000) /* bit 12 */ -#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MASK (0x00008000) /* bit 15 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MASK (0x00030000) /* bits 16-17 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MASK (0x00F00000) /* bits 20-23 */ -#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MASK (0xC0000000) /* bits 30-31 */ - -#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT (20) -#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_BITSHIFT (4) -#define RX_RB_TIMEOUT (0x10) - -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) - -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) - -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) - - -/** - * Rx Shared Status Registers (RSSR) - * - * After stopping Rx DMA channel (writing 0 to FH_MEM_RCSR_CHNL0_CONFIG_REG), - * driver must poll FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. - * - * Bit fields: - * 24: 1 = Channel 0 is idle - * - * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV contain - * default values that should not be altered by the driver. - */ -#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) -#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) - -#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) -#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) -#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV (FH_MEM_RSSR_LOWER_BOUND + 0x008) - -#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) - - -/** - * Transmit DMA Channel Control/Status Registers (TCSR) - * - * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels - * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, - * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. - * - * To use a Tx DMA channel, driver must initialize its - * IWL_FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: - * - * IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - * IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL - * - * All other bits should be 0. - * - * Bit fields: - * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, - * '10' operate normally - * 29- 4: Reserved, set to "0" - * 3: Enable internal DMA requests (1, normal operation), disable (0) - * 2- 0: Reserved, set to "0" - */ -#define IWL_FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) -#define IWL_FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) - -/* Find Control/Status reg for given Tx DMA/FIFO channel */ -#define IWL_FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ - (IWL_FH_TCSR_LOWER_BOUND + 0x20 * _chnl) - -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL (0x00000000) -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL (0x00000008) - -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) - -/** - * Tx Shared Status Registers (TSSR) - * - * After stopping Tx DMA channel (writing 0 to - * IWL_FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll - * IWL_FH_TSSR_TX_STATUS_REG until selected Tx channel is idle - * (channel's buffers empty | no pending requests). - * - * Bit fields: - * 31-24: 1 = Channel buffers empty (channel 7:0) - * 23-16: 1 = No pending requests (channel 7:0) - */ -#define IWL_FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) -#define IWL_FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) - -#define IWL_FH_TSSR_TX_STATUS_REG (IWL_FH_TSSR_LOWER_BOUND + 0x010) - -#define IWL_FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) \ - ((1 << (_chnl)) << 24) -#define IWL_FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl) \ - ((1 << (_chnl)) << 16) - -#define IWL_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) \ - (IWL_FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) | \ - IWL_FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl)) - - -/********************* START TX SCHEDULER *************************************/ - -/** - * 4965 Tx Scheduler - * - * The Tx Scheduler selects the next frame to be transmitted, chosing TFDs - * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in - * host DRAM. It steers each frame's Tx command (which contains the frame - * data) into one of up to 7 prioritized Tx DMA FIFO channels within the - * device. A queue maps to only one (selectable by driver) Tx DMA channel, - * but one DMA channel may take input from several queues. - * - * Tx DMA channels have dedicated purposes. For 4965, they are used as follows: - * - * 0 -- EDCA BK (background) frames, lowest priority - * 1 -- EDCA BE (best effort) frames, normal priority - * 2 -- EDCA VI (video) frames, higher priority - * 3 -- EDCA VO (voice) and management frames, highest priority - * 4 -- Commands (e.g. RXON, etc.) - * 5 -- HCCA short frames - * 6 -- HCCA long frames - * 7 -- not used by driver (device-internal only) - * - * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. - * In addition, driver can map queues 7-15 to Tx DMA/FIFO channels 0-3 to - * support 11n aggregation via EDCA DMA channels. - * - * The driver sets up each queue to work in one of two modes: - * - * 1) Scheduler-Ack, in which the scheduler automatically supports a - * block-ack (BA) window of up to 64 TFDs. In this mode, each queue - * contains TFDs for a unique combination of Recipient Address (RA) - * and Traffic Identifier (TID), that is, traffic of a given - * Quality-Of-Service (QOS) priority, destined for a single station. - * - * In scheduler-ack mode, the scheduler keeps track of the Tx status of - * each frame within the BA window, including whether it's been transmitted, - * and whether it's been acknowledged by the receiving station. The device - * automatically processes block-acks received from the receiving STA, - * and reschedules un-acked frames to be retransmitted (successful - * Tx completion may end up being out-of-order). - * - * The driver must maintain the queue's Byte Count table in host DRAM - * (struct iwl4965_sched_queue_byte_cnt_tbl) for this mode. - * This mode does not support fragmentation. - * - * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. - * The device may automatically retry Tx, but will retry only one frame - * at a time, until receiving ACK from receiving station, or reaching - * retry limit and giving up. - * - * The command queue (#4) must use this mode! - * This mode does not require use of the Byte Count table in host DRAM. - * - * Driver controls scheduler operation via 3 means: - * 1) Scheduler registers - * 2) Shared scheduler data base in internal 4956 SRAM - * 3) Shared data in host DRAM - * - * Initialization: - * - * When loading, driver should allocate memory for: - * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. - * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory - * (1024 bytes for each queue). - * - * After receiving "Alive" response from uCode, driver must initialize - * the scheduler (especially for queue #4, the command queue, otherwise - * the driver can't issue commands!): - */ - -/** - * Max Tx window size is the max number of contiguous TFDs that the scheduler - * can keep track of at one time when creating block-ack chains of frames. - * Note that "64" matches the number of ack bits in a block-ack packet. - * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize - * SCD_CONTEXT_QUEUE_OFFSET(x) values. - */ -#define SCD_WIN_SIZE 64 -#define SCD_FRAME_LIMIT 64 - -/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ -#define SCD_START_OFFSET 0xa02c00 - -/* - * 4965 tells driver SRAM address for internal scheduler structs via this reg. - * Value is valid only after "Alive" response from uCode. - */ -#define SCD_SRAM_BASE_ADDR (SCD_START_OFFSET + 0x0) - -/* - * Driver may need to update queue-empty bits after changing queue's - * write and read pointers (indexes) during (re-)initialization (i.e. when - * scheduler is not tracking what's happening). - * Bit fields: - * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit - * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty - * NOTE: This register is not used by Linux driver. - */ -#define SCD_EMPTY_BITS (SCD_START_OFFSET + 0x4) - -/* - * Physical base address of array of byte count (BC) circular buffers (CBs). - * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode. - * This register points to BC CB for queue 0, must be on 1024-byte boundary. - * Others are spaced by 1024 bytes. - * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad. - * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff). - * Bit fields: - * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. - */ -#define SCD_DRAM_BASE_ADDR (SCD_START_OFFSET + 0x10) - -/* - * Enables any/all Tx DMA/FIFO channels. - * Scheduler generates requests for only the active channels. - * Set this to 0xff to enable all 8 channels (normal usage). - * Bit fields: - * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 - */ -#define SCD_TXFACT (SCD_START_OFFSET + 0x1c) - -/* Mask to enable contiguous Tx DMA/FIFO channels between "lo" and "hi". */ -#define SCD_TXFACT_REG_TXFIFO_MASK(lo, hi) \ - ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) - -/* - * Queue (x) Write Pointers (indexes, really!), one for each Tx queue. - * Initialized and updated by driver as new TFDs are added to queue. - * NOTE: If using Block Ack, index must correspond to frame's - * Start Sequence Number; index = (SSN & 0xff) - * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? - */ -#define SCD_QUEUE_WRPTR(x) (SCD_START_OFFSET + 0x24 + (x) * 4) - -/* - * Queue (x) Read Pointers (indexes, really!), one for each Tx queue. - * For FIFO mode, index indicates next frame to transmit. - * For Scheduler-ACK mode, index indicates first frame in Tx window. - * Initialized by driver, updated by scheduler. - */ -#define SCD_QUEUE_RDPTR(x) (SCD_START_OFFSET + 0x64 + (x) * 4) - -/* - * Select which queues work in chain mode (1) vs. not (0). - * Use chain mode to build chains of aggregated frames. - * Bit fields: - * 31-16: Reserved - * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time - * NOTE: If driver sets up queue for chain mode, it should be also set up - * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). - */ -#define SCD_QUEUECHAIN_SEL (SCD_START_OFFSET + 0xd0) - -/* - * Select which queues interrupt driver when scheduler increments - * a queue's read pointer (index). - * Bit fields: - * 31-16: Reserved - * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled - * NOTE: This functionality is apparently a no-op; driver relies on interrupts - * from Rx queue to read Tx command responses and update Tx queues. - */ -#define SCD_INTERRUPT_MASK (SCD_START_OFFSET + 0xe4) - -/* - * Queue search status registers. One for each queue. - * Sets up queue mode and assigns queue to Tx DMA channel. - * Bit fields: - * 19-10: Write mask/enable bits for bits 0-9 - * 9: Driver should init to "0" - * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0). - * Driver should init to "1" for aggregation mode, or "0" otherwise. - * 7-6: Driver should init to "0" - * 5: Window Size Left; indicates whether scheduler can request - * another TFD, based on window size, etc. Driver should init - * this bit to "1" for aggregation mode, or "0" for non-agg. - * 4-1: Tx FIFO to use (range 0-7). - * 0: Queue is active (1), not active (0). - * Other bits should be written as "0" - * - * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled - * via SCD_QUEUECHAIN_SEL. - */ -#define SCD_QUEUE_STATUS_BITS(x) (SCD_START_OFFSET + 0x104 + (x) * 4) - -/* Bit field positions */ -#define SCD_QUEUE_STTS_REG_POS_ACTIVE (0) -#define SCD_QUEUE_STTS_REG_POS_TXF (1) -#define SCD_QUEUE_STTS_REG_POS_WSL (5) -#define SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) - -/* Write masks */ -#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) -#define SCD_QUEUE_STTS_REG_MSK (0x0007FC00) - -/** - * 4965 internal SRAM structures for scheduler, shared with driver ... - * - * Driver should clear and initialize the following areas after receiving - * "Alive" response from 4965 uCode, i.e. after initial - * uCode load, or after a uCode load done for error recovery: - * - * SCD_CONTEXT_DATA_OFFSET (size 128 bytes) - * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes) - * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes) - * - * Driver accesses SRAM via HBUS_TARG_MEM_* registers. - * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR. - * All OFFSET values must be added to this base address. - */ - -/* - * Queue context. One 8-byte entry for each of 16 queues. - * - * Driver should clear this entire area (size 0x80) to 0 after receiving - * "Alive" notification from uCode. Additionally, driver should init - * each queue's entry as follows: - * - * LS Dword bit fields: - * 0-06: Max Tx window size for Scheduler-ACK. Driver should init to 64. - * - * MS Dword bit fields: - * 16-22: Frame limit. Driver should init to 10 (0xa). - * - * Driver should init all other bits to 0. - * - * Init must be done after driver receives "Alive" response from 4965 uCode, - * and when setting up queue for aggregation. - */ -#define SCD_CONTEXT_DATA_OFFSET 0x380 -#define SCD_CONTEXT_QUEUE_OFFSET(x) (SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) - -#define SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) -#define SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) - -/* - * Tx Status Bitmap - * - * Driver should clear this entire area (size 0x100) to 0 after receiving - * "Alive" notification from uCode. Area is used only by device itself; - * no other support (besides clearing) is required from driver. - */ -#define SCD_TX_STTS_BITMAP_OFFSET 0x400 - -/* - * RAxTID to queue translation mapping. - * - * When queue is in Scheduler-ACK mode, frames placed in a that queue must be - * for only one combination of receiver address (RA) and traffic ID (TID), i.e. - * one QOS priority level destined for one station (for this wireless link, - * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit - * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK - * mode, the device ignores the mapping value. - * - * Bit fields, for each 16-bit map: - * 15-9: Reserved, set to 0 - * 8-4: Index into device's station table for recipient station - * 3-0: Traffic ID (tid), range 0-15 - * - * Driver should clear this entire area (size 32 bytes) to 0 after receiving - * "Alive" notification from uCode. To update a 16-bit map value, driver - * must read a dword-aligned value from device SRAM, replace the 16-bit map - * value of interest, and write the dword value back into device SRAM. - */ -#define SCD_TRANSLATE_TBL_OFFSET 0x500 - -/* Find translation table dword to read/write for given queue */ -#define SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ - ((SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) - -#define SCD_TXFIFO_POS_TID (0) -#define SCD_TXFIFO_POS_RA (4) -#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) - -/*********************** END TX SCHEDULER *************************************/ - -static inline u8 iwl4965_hw_get_rate(__le32 rate_n_flags) -{ - return le32_to_cpu(rate_n_flags) & 0xFF; -} -static inline u16 iwl4965_hw_get_rate_n_flags(__le32 rate_n_flags) -{ - return le32_to_cpu(rate_n_flags) & 0xFFFF; -} -static inline __le32 iwl4965_hw_set_rate_n_flags(u8 rate, u16 flags) -{ - return cpu_to_le32(flags|(u16)rate); -} - /** * Tx/Rx Queues @@ -1385,14 +815,15 @@ static inline __le32 iwl4965_hw_set_rate_n_flags(u8 rate, u16 flags) * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array * in DRAM containing 256 Transmit Frame Descriptors (TFDs). */ -#define IWL4965_MAX_WIN_SIZE 64 -#define IWL4965_QUEUE_SIZE 256 -#define IWL4965_NUM_FIFOS 7 -#define IWL4965_MAX_NUM_QUEUES 16 - +#define IWL49_MAX_WIN_SIZE 64 +#define IWL49_QUEUE_SIZE 256 +#define IWL49_NUM_FIFOS 7 +#define IWL49_CMD_FIFO_NUM 4 +#define IWL49_NUM_QUEUES 16 +#define IWL49_NUM_AMPDU_QUEUES 8 /** - * struct iwl4965_tfd_frame_data + * struct iwl_tfd_frame_data * * Describes up to 2 buffers containing (contiguous) portions of a Tx frame. * Each buffer must be on dword boundary. @@ -1411,7 +842,7 @@ static inline __le32 iwl4965_hw_set_rate_n_flags(u8 rate, u16 flags) * 31-20: Tx buffer 2 length (bytes) * 19- 0: Tx buffer 2 address bits [35:16] */ -struct iwl4965_tfd_frame_data { +struct iwl_tfd_frame_data { __le32 tb1_addr; __le32 val1; @@ -1441,7 +872,7 @@ struct iwl4965_tfd_frame_data { /** - * struct iwl4965_tfd_frame + * struct iwl_tfd_frame * * Transmit Frame Descriptor (TFD) * @@ -1468,7 +899,7 @@ struct iwl4965_tfd_frame_data { * * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. */ -struct iwl4965_tfd_frame { +struct iwl_tfd_frame { __le32 val0; /* __le32 rsvd1:24; */ /* __le32 num_tbs:5; */ @@ -1477,7 +908,7 @@ struct iwl4965_tfd_frame { #define IWL_num_tbs_SYM val0 /* __le32 rsvd2:1; */ /* __le32 padding:2; */ - struct iwl4965_tfd_frame_data pa[10]; + struct iwl_tfd_frame_data pa[10]; __le32 reserved; } __attribute__ ((packed)); @@ -1520,10 +951,10 @@ struct iwl4965_queue_byte_cnt_entry { * 4965 assumes tables are separated by 1024 bytes. */ struct iwl4965_sched_queue_byte_cnt_tbl { - struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL4965_QUEUE_SIZE + - IWL4965_MAX_WIN_SIZE]; + struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL49_QUEUE_SIZE + + IWL49_MAX_WIN_SIZE]; u8 dont_care[1024 - - (IWL4965_QUEUE_SIZE + IWL4965_MAX_WIN_SIZE) * + (IWL49_QUEUE_SIZE + IWL49_MAX_WIN_SIZE) * sizeof(__le16)]; } __attribute__ ((packed)); @@ -1553,7 +984,7 @@ struct iwl4965_sched_queue_byte_cnt_tbl { */ struct iwl4965_shared { struct iwl4965_sched_queue_byte_cnt_tbl - queues_byte_cnt_tbls[IWL4965_MAX_NUM_QUEUES]; + queues_byte_cnt_tbls[IWL49_NUM_QUEUES]; __le32 rb_closed; /* __le32 rb_closed_stts_rb_num:12; */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index 3a7f0cb..e69de29 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -1,2786 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * James P. Ketrenos <ipw2100-admin@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/skbuff.h> -#include <linux/wireless.h> -#include <net/mac80211.h> -#include <net/ieee80211.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/delay.h> - -#include <linux/workqueue.h> - -#include "../net/mac80211/rate.h" - -#include "iwl-4965.h" -#include "iwl-core.h" -#include "iwl-helpers.h" - -#define RS_NAME "iwl-4965-rs" - -#define NUM_TRY_BEFORE_ANTENNA_TOGGLE 1 -#define IWL_NUMBER_TRY 1 -#define IWL_HT_NUMBER_TRY 3 - -#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ -#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ -#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ - -/* max time to accum history 2 seconds */ -#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ) - -static u8 rs_ht_to_legacy[] = { - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, - IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, - IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, - IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX -}; - -struct iwl4965_rate { - u32 rate_n_flags; -} __attribute__ ((packed)); - -/** - * struct iwl4965_rate_scale_data -- tx success history for one rate - */ -struct iwl4965_rate_scale_data { - u64 data; /* bitmap of successful frames */ - s32 success_counter; /* number of frames successful */ - s32 success_ratio; /* per-cent * 128 */ - s32 counter; /* number of frames attempted */ - s32 average_tpt; /* success ratio * expected throughput */ - unsigned long stamp; -}; - -/** - * struct iwl4965_scale_tbl_info -- tx params and success history for all rates - * - * There are two of these in struct iwl4965_lq_sta, - * one for "active", and one for "search". - */ -struct iwl4965_scale_tbl_info { - enum iwl4965_table_type lq_type; - enum iwl4965_antenna_type antenna_type; - u8 is_SGI; /* 1 = short guard interval */ - u8 is_fat; /* 1 = 40 MHz channel width */ - u8 is_dup; /* 1 = duplicated data streams */ - u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ - s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ - struct iwl4965_rate current_rate; /* rate_n_flags, uCode API format */ - struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ -}; - -#ifdef CONFIG_IWL4965_HT - -struct iwl4965_traffic_load { - unsigned long time_stamp; /* age of the oldest statistics */ - u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time - * slice */ - u32 total; /* total num of packets during the - * last TID_MAX_TIME_DIFF */ - u8 queue_count; /* number of queues that has - * been used since the last cleanup */ - u8 head; /* start of the circular buffer */ -}; - -#endif /* CONFIG_IWL4965_HT */ - -/** - * struct iwl4965_lq_sta -- driver's rate scaling private structure - * - * Pointer to this gets passed back and forth between driver and mac80211. - */ -struct iwl4965_lq_sta { - u8 active_tbl; /* index of active table, range 0-1 */ - u8 enable_counter; /* indicates HT mode */ - u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ - u8 search_better_tbl; /* 1: currently trying alternate mode */ - s32 last_tpt; - - /* The following determine when to search for a new mode */ - u32 table_count_limit; - u32 max_failure_limit; /* # failed frames before new search */ - u32 max_success_limit; /* # successful frames before new search */ - u32 table_count; - u32 total_failed; /* total failed frames, any/all rates */ - u32 total_success; /* total successful frames, any/all rates */ - u32 flush_timer; /* time staying in mode before new search */ - - u8 action_counter; /* # mode-switch actions tried */ - u8 antenna; - u8 valid_antenna; - u8 is_green; - u8 is_dup; - enum ieee80211_band band; - u8 ibss_sta_added; - - /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ - u32 supp_rates; - u16 active_rate; - u16 active_siso_rate; - u16 active_mimo_rate; - u16 active_rate_basic; - - struct iwl_link_quality_cmd lq; - struct iwl4965_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ -#ifdef CONFIG_IWL4965_HT - struct iwl4965_traffic_load load[TID_MAX_LOAD_COUNT]; - u8 tx_agg_tid_en; -#endif -#ifdef CONFIG_MAC80211_DEBUGFS - struct dentry *rs_sta_dbgfs_scale_table_file; - struct dentry *rs_sta_dbgfs_stats_table_file; -#ifdef CONFIG_IWL4965_HT - struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; -#endif - struct iwl4965_rate dbg_fixed; -#endif - struct iwl_priv *drv; -}; - -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct net_device *dev, - struct ieee80211_hdr *hdr, - struct sta_info *sta); -static void rs_fill_link_cmd(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *tx_mcs, - struct iwl_link_quality_cmd *tbl); - - -#ifdef CONFIG_MAC80211_DEBUGFS -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *mcs, int index); -#else -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *mcs, int index) -{} -#endif - -/* - * Expected throughput metrics for following rates: - * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits - * "G" is the only table that supports CCK (the first 4 rates). - */ -static s32 expected_tpt_A[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186 -}; - -static s32 expected_tpt_G[IWL_RATE_COUNT] = { - 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186 -}; - -static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202 -}; - -static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211 -}; - -static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251 -}; - -static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257 -}; - -static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257 -}; - -static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264 -}; - -static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289 -}; - -static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293 -}; - -static inline u8 iwl4965_rate_get_rate(u32 rate_n_flags) -{ - return (u8)(rate_n_flags & 0xFF); -} - -static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window) -{ - window->data = 0; - window->success_counter = 0; - window->success_ratio = IWL_INVALID_VALUE; - window->counter = 0; - window->average_tpt = IWL_INVALID_VALUE; - window->stamp = 0; -} - -#ifdef CONFIG_IWL4965_HT -/* - * removes the old data from the statistics. All data that is older than - * TID_MAX_TIME_DIFF, will be deleted. - */ -static void rs_tl_rm_old_stats(struct iwl4965_traffic_load *tl, u32 curr_time) -{ - /* The oldest age we want to keep */ - u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; - - while (tl->queue_count && - (tl->time_stamp < oldest_time)) { - tl->total -= tl->packet_count[tl->head]; - tl->packet_count[tl->head] = 0; - tl->time_stamp += TID_QUEUE_CELL_SPACING; - tl->queue_count--; - tl->head++; - if (tl->head >= TID_QUEUE_MAX_SIZE) - tl->head = 0; - } -} - -/* - * increment traffic load value for tid and also remove - * any old values if passed the certain time period - */ -static void rs_tl_add_packet(struct iwl4965_lq_sta *lq_data, u8 tid) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl4965_traffic_load *tl = NULL; - - if (tid >= TID_MAX_LOAD_COUNT) - return; - - tl = &lq_data->load[tid]; - - curr_time -= curr_time % TID_ROUND_VALUE; - - /* Happens only for the first packet. Initialize the data */ - if (!(tl->queue_count)) { - tl->total = 1; - tl->time_stamp = curr_time; - tl->queue_count = 1; - tl->head = 0; - tl->packet_count[0] = 1; - return; - } - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - index = (tl->head + index) % TID_QUEUE_MAX_SIZE; - tl->packet_count[index] = tl->packet_count[index] + 1; - tl->total = tl->total + 1; - - if ((index + 1) > tl->queue_count) - tl->queue_count = index + 1; -} - -/* - get the traffic load value for tid -*/ -static u32 rs_tl_get_load(struct iwl4965_lq_sta *lq_data, u8 tid) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl4965_traffic_load *tl = NULL; - - if (tid >= TID_MAX_LOAD_COUNT) - return 0; - - tl = &(lq_data->load[tid]); - - curr_time -= curr_time % TID_ROUND_VALUE; - - if (!(tl->queue_count)) - return 0; - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - return tl->total; -} - -static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_data, u8 tid, - struct sta_info *sta) -{ - unsigned long state; - DECLARE_MAC_BUF(mac); - - spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); - state = sta->ampdu_mlme.tid_state_tx[tid]; - spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); - - if (state == HT_AGG_STATE_IDLE && - rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) { - IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n", - print_mac(mac, sta->addr), tid); - ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid); - } -} - -static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, - struct iwl4965_lq_sta *lq_data, - struct sta_info *sta) -{ - if ((tid < TID_MAX_LOAD_COUNT)) - rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); - else if (tid == IWL_AGG_ALL_TID) - for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) - rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); -} - -#endif /* CONFIG_IWLWIFI_HT */ - -/** - * rs_collect_tx_data - Update the success/failure sliding window - * - * We keep a sliding window of the last 62 packets transmitted - * at this rate. window->data contains the bitmask of successful - * packets. - */ -static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, - int scale_index, s32 tpt, int retries, - int successes) -{ - struct iwl4965_rate_scale_data *window = NULL; - u64 mask; - u8 win_size = IWL_RATE_MAX_WINDOW; - s32 fail_count; - - if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) - return -EINVAL; - - /* Select data for current tx bit rate */ - window = &(windows[scale_index]); - - /* - * Keep track of only the latest 62 tx frame attempts in this rate's - * history window; anything older isn't really relevant any more. - * If we have filled up the sliding window, drop the oldest attempt; - * if the oldest attempt (highest bit in bitmap) shows "success", - * subtract "1" from the success counter (this is the main reason - * we keep these bitmaps!). - */ - while (retries > 0) { - if (window->counter >= win_size) { - window->counter = win_size - 1; - mask = 1; - mask = (mask << (win_size - 1)); - if (window->data & mask) { - window->data &= ~mask; - window->success_counter = - window->success_counter - 1; - } - } - - /* Increment frames-attempted counter */ - window->counter++; - - /* Shift bitmap by one frame (throw away oldest history), - * OR in "1", and increment "success" if this - * frame was successful. */ - mask = window->data; - window->data = (mask << 1); - if (successes > 0) { - window->success_counter = window->success_counter + 1; - window->data |= 0x1; - successes--; - } - - retries--; - } - - /* Calculate current success ratio, avoid divide-by-0! */ - if (window->counter > 0) - window->success_ratio = 128 * (100 * window->success_counter) - / window->counter; - else - window->success_ratio = IWL_INVALID_VALUE; - - fail_count = window->counter - window->success_counter; - - /* Calculate average throughput, if we have enough history. */ - if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || - (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) - window->average_tpt = (window->success_ratio * tpt + 64) / 128; - else - window->average_tpt = IWL_INVALID_VALUE; - - /* Tag this window as having been updated */ - window->stamp = jiffies; - - return 0; -} - -/* - * Fill uCode API rate_n_flags field, based on "search" or "active" table. - */ -static void rs_mcs_from_tbl(struct iwl4965_rate *mcs_rate, - struct iwl4965_scale_tbl_info *tbl, - int index, u8 use_green) -{ - if (is_legacy(tbl->lq_type)) { - mcs_rate->rate_n_flags = iwl4965_rates[index].plcp; - if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) - mcs_rate->rate_n_flags |= RATE_MCS_CCK_MSK; - - } else if (is_siso(tbl->lq_type)) { - if (index > IWL_LAST_OFDM_RATE) - index = IWL_LAST_OFDM_RATE; - mcs_rate->rate_n_flags = iwl4965_rates[index].plcp_siso | - RATE_MCS_HT_MSK; - } else { - if (index > IWL_LAST_OFDM_RATE) - index = IWL_LAST_OFDM_RATE; - mcs_rate->rate_n_flags = iwl4965_rates[index].plcp_mimo | - RATE_MCS_HT_MSK; - } - - switch (tbl->antenna_type) { - case ANT_BOTH: - mcs_rate->rate_n_flags |= RATE_MCS_ANT_AB_MSK; - break; - case ANT_MAIN: - mcs_rate->rate_n_flags |= RATE_MCS_ANT_A_MSK; - break; - case ANT_AUX: - mcs_rate->rate_n_flags |= RATE_MCS_ANT_B_MSK; - break; - case ANT_NONE: - break; - } - - if (is_legacy(tbl->lq_type)) - return; - - if (tbl->is_fat) { - if (tbl->is_dup) - mcs_rate->rate_n_flags |= RATE_MCS_DUP_MSK; - else - mcs_rate->rate_n_flags |= RATE_MCS_FAT_MSK; - } - if (tbl->is_SGI) - mcs_rate->rate_n_flags |= RATE_MCS_SGI_MSK; - - if (use_green) { - mcs_rate->rate_n_flags |= RATE_MCS_GF_MSK; - if (is_siso(tbl->lq_type)) - mcs_rate->rate_n_flags &= ~RATE_MCS_SGI_MSK; - } -} - -/* - * Interpret uCode API's rate_n_flags format, - * fill "search" or "active" tx mode table. - */ -static int rs_get_tbl_info_from_mcs(const struct iwl4965_rate *mcs_rate, - enum ieee80211_band band, - struct iwl4965_scale_tbl_info *tbl, - int *rate_idx) -{ - int index; - u32 ant_msk; - - index = iwl4965_hwrate_to_plcp_idx(mcs_rate->rate_n_flags); - - if (index == IWL_RATE_INVALID) { - *rate_idx = -1; - return -EINVAL; - } - tbl->is_SGI = 0; /* default legacy setup */ - tbl->is_fat = 0; - tbl->is_dup = 0; - tbl->antenna_type = ANT_BOTH; /* default MIMO setup */ - - /* legacy rate format */ - if (!(mcs_rate->rate_n_flags & RATE_MCS_HT_MSK)) { - ant_msk = (mcs_rate->rate_n_flags & RATE_MCS_ANT_AB_MSK); - - if (ant_msk == RATE_MCS_ANT_AB_MSK) - tbl->lq_type = LQ_NONE; - else { - - if (band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - - if (mcs_rate->rate_n_flags & RATE_MCS_ANT_A_MSK) - tbl->antenna_type = ANT_MAIN; - else - tbl->antenna_type = ANT_AUX; - } - *rate_idx = index; - - /* HT rate format, SISO (might be 20 MHz legacy or 40 MHz fat width) */ - } else if (iwl4965_rate_get_rate(mcs_rate->rate_n_flags) - <= IWL_RATE_SISO_60M_PLCP) { - tbl->lq_type = LQ_SISO; - - ant_msk = (mcs_rate->rate_n_flags & RATE_MCS_ANT_AB_MSK); - if (ant_msk == RATE_MCS_ANT_AB_MSK) - tbl->lq_type = LQ_NONE; - else { - if (mcs_rate->rate_n_flags & RATE_MCS_ANT_A_MSK) - tbl->antenna_type = ANT_MAIN; - else - tbl->antenna_type = ANT_AUX; - } - if (mcs_rate->rate_n_flags & RATE_MCS_SGI_MSK) - tbl->is_SGI = 1; - - if ((mcs_rate->rate_n_flags & RATE_MCS_FAT_MSK) || - (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK)) - tbl->is_fat = 1; - - if (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK) - tbl->is_dup = 1; - - *rate_idx = index; - - /* HT rate format, MIMO (might be 20 MHz legacy or 40 MHz fat width) */ - } else { - tbl->lq_type = LQ_MIMO; - if (mcs_rate->rate_n_flags & RATE_MCS_SGI_MSK) - tbl->is_SGI = 1; - - if ((mcs_rate->rate_n_flags & RATE_MCS_FAT_MSK) || - (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK)) - tbl->is_fat = 1; - - if (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK) - tbl->is_dup = 1; - *rate_idx = index; - } - return 0; -} - -static inline void rs_toggle_antenna(struct iwl4965_rate *new_rate, - struct iwl4965_scale_tbl_info *tbl) -{ - if (tbl->antenna_type == ANT_AUX) { - tbl->antenna_type = ANT_MAIN; - new_rate->rate_n_flags &= ~RATE_MCS_ANT_B_MSK; - new_rate->rate_n_flags |= RATE_MCS_ANT_A_MSK; - } else { - tbl->antenna_type = ANT_AUX; - new_rate->rate_n_flags &= ~RATE_MCS_ANT_A_MSK; - new_rate->rate_n_flags |= RATE_MCS_ANT_B_MSK; - } -} - -static inline u8 rs_use_green(struct iwl_priv *priv, - struct ieee80211_conf *conf) -{ -#ifdef CONFIG_IWL4965_HT - return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && - priv->current_ht_config.is_green_field && - !priv->current_ht_config.non_GF_STA_present); -#endif /* CONFIG_IWL4965_HT */ - return 0; -} - -/** - * rs_get_supported_rates - get the available rates - * - * if management frame or broadcast frame only return - * basic available rates. - * - */ -static void rs_get_supported_rates(struct iwl4965_lq_sta *lq_sta, - struct ieee80211_hdr *hdr, - enum iwl4965_table_type rate_type, - u16 *data_rate) -{ - if (is_legacy(rate_type)) - *data_rate = lq_sta->active_rate; - else { - if (is_siso(rate_type)) - *data_rate = lq_sta->active_siso_rate; - else - *data_rate = lq_sta->active_mimo_rate; - } - - if (hdr && is_multicast_ether_addr(hdr->addr1) && - lq_sta->active_rate_basic) { - *data_rate = lq_sta->active_rate_basic; - } -} - -static u16 rs_get_adjacent_rate(u8 index, u16 rate_mask, int rate_type) -{ - u8 high = IWL_RATE_INVALID; - u8 low = IWL_RATE_INVALID; - - /* 802.11A or ht walks to the next literal adjacent rate in - * the rate table */ - if (is_a_band(rate_type) || !is_legacy(rate_type)) { - int i; - u32 mask; - - /* Find the previous rate that is in the rate mask */ - i = index - 1; - for (mask = (1 << i); i >= 0; i--, mask >>= 1) { - if (rate_mask & mask) { - low = i; - break; - } - } - - /* Find the next rate that is in the rate mask */ - i = index + 1; - for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { - if (rate_mask & mask) { - high = i; - break; - } - } - - return (high << 8) | low; - } - - low = index; - while (low != IWL_RATE_INVALID) { - low = iwl4965_rates[low].prev_rs; - if (low == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << low)) - break; - IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low); - } - - high = index; - while (high != IWL_RATE_INVALID) { - high = iwl4965_rates[high].next_rs; - if (high == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << high)) - break; - IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high); - } - - return (high << 8) | low; -} - -static void rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl, u8 scale_index, - u8 ht_possible, struct iwl4965_rate *mcs_rate) -{ - s32 low; - u16 rate_mask; - u16 high_low; - u8 switch_to_legacy = 0; - u8 is_green = lq_sta->is_green; - - /* check if we need to switch from HT to legacy rates. - * assumption is that mandatory rates (1Mbps or 6Mbps) - * are always supported (spec demand) */ - if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { - switch_to_legacy = 1; - scale_index = rs_ht_to_legacy[scale_index]; - if (lq_sta->band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - - if ((tbl->antenna_type == ANT_BOTH) || - (tbl->antenna_type == ANT_NONE)) - tbl->antenna_type = ANT_MAIN; - - tbl->is_fat = 0; - tbl->is_SGI = 0; - } - - rs_get_supported_rates(lq_sta, NULL, tbl->lq_type, &rate_mask); - - /* Mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - /* supp_rates has no CCK bits in A mode */ - if (lq_sta->band == IEEE80211_BAND_5GHZ) - rate_mask = (u16)(rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_mask = (u16)(rate_mask & lq_sta->supp_rates); - } - - /* If we switched from HT to legacy, check current rate */ - if (switch_to_legacy && (rate_mask & (1 << scale_index))) { - rs_mcs_from_tbl(mcs_rate, tbl, scale_index, is_green); - return; - } - - high_low = rs_get_adjacent_rate(scale_index, rate_mask, tbl->lq_type); - low = high_low & 0xff; - - if (low != IWL_RATE_INVALID) - rs_mcs_from_tbl(mcs_rate, tbl, low, is_green); - else - rs_mcs_from_tbl(mcs_rate, tbl, scale_index, is_green); -} - -/* - * mac80211 sends us Tx status - */ -static void rs_tx_status(void *priv_rate, struct net_device *dev, - struct sk_buff *skb, - struct ieee80211_tx_status *tx_resp) -{ - int status; - u8 retries; - int rs_index, index = 0; - struct iwl4965_lq_sta *lq_sta; - struct iwl_link_quality_cmd *table; - struct sta_info *sta; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw *hw = local_to_hw(local); - struct iwl4965_rate_scale_data *window = NULL; - struct iwl4965_rate_scale_data *search_win = NULL; - struct iwl4965_rate tx_mcs; - struct iwl4965_scale_tbl_info tbl_type; - struct iwl4965_scale_tbl_info *curr_tbl, *search_tbl; - u8 active_index = 0; - u16 fc = le16_to_cpu(hdr->frame_control); - s32 tpt = 0; - - IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n"); - - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) - return; - - /* This packet was aggregated but doesn't carry rate scale info */ - if ((tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) && - !(tx_resp->flags & IEEE80211_TX_STATUS_AMPDU)) - return; - - retries = tx_resp->retry_count; - - if (retries > 15) - retries = 15; - - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - - if (!sta || !sta->rate_ctrl_priv) - goto out; - - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - - if (!priv->lq_mngr.lq_ready) - goto out; - - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && - !lq_sta->ibss_sta_added) - goto out; - - table = &lq_sta->lq; - active_index = lq_sta->active_tbl; - - /* Get mac80211 antenna info */ - lq_sta->antenna = - (lq_sta->valid_antenna & local->hw.conf.antenna_sel_tx); - if (!lq_sta->antenna) - lq_sta->antenna = lq_sta->valid_antenna; - - /* Ignore mac80211 antenna info for now */ - lq_sta->antenna = lq_sta->valid_antenna; - - curr_tbl = &(lq_sta->lq_info[active_index]); - search_tbl = &(lq_sta->lq_info[(1 - active_index)]); - window = (struct iwl4965_rate_scale_data *) - &(curr_tbl->win[0]); - search_win = (struct iwl4965_rate_scale_data *) - &(search_tbl->win[0]); - - /* - * Ignore this Tx frame response if its initial rate doesn't match - * that of latest Link Quality command. There may be stragglers - * from a previous Link Quality command, but we're no longer interested - * in those; they're either from the "active" mode while we're trying - * to check "search" mode, or a prior "search" mode after we've moved - * to a new "search" mode (which might become the new "active" mode). - */ - tx_mcs.rate_n_flags = le32_to_cpu(table->rs_table[0].rate_n_flags); - rs_get_tbl_info_from_mcs(&tx_mcs, priv->band, &tbl_type, &rs_index); - if (priv->band == IEEE80211_BAND_5GHZ) - rs_index -= IWL_FIRST_OFDM_RATE; - - if ((tx_resp->control.tx_rate == NULL) || - (tbl_type.is_SGI ^ - !!(tx_resp->control.flags & IEEE80211_TXCTL_SHORT_GI)) || - (tbl_type.is_fat ^ - !!(tx_resp->control.flags & IEEE80211_TXCTL_40_MHZ_WIDTH)) || - (tbl_type.is_dup ^ - !!(tx_resp->control.flags & IEEE80211_TXCTL_DUP_DATA)) || - (tbl_type.antenna_type ^ - tx_resp->control.antenna_sel_tx) || - (!!(tx_mcs.rate_n_flags & RATE_MCS_HT_MSK) ^ - !!(tx_resp->control.flags & IEEE80211_TXCTL_OFDM_HT)) || - (!!(tx_mcs.rate_n_flags & RATE_MCS_GF_MSK) ^ - !!(tx_resp->control.flags & IEEE80211_TXCTL_GREEN_FIELD)) || - (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate != - tx_resp->control.tx_rate->bitrate)) { - IWL_DEBUG_RATE("initial rate does not match 0x%x\n", - tx_mcs.rate_n_flags); - goto out; - } - - /* Update frame history window with "failure" for each Tx retry. */ - while (retries) { - /* Look up the rate and other info used for each tx attempt. - * Each tx attempt steps one entry deeper in the rate table. */ - tx_mcs.rate_n_flags = - le32_to_cpu(table->rs_table[index].rate_n_flags); - rs_get_tbl_info_from_mcs(&tx_mcs, priv->band, - &tbl_type, &rs_index); - - /* If type matches "search" table, - * add failure to "search" history */ - if ((tbl_type.lq_type == search_tbl->lq_type) && - (tbl_type.antenna_type == search_tbl->antenna_type) && - (tbl_type.is_SGI == search_tbl->is_SGI)) { - if (search_tbl->expected_tpt) - tpt = search_tbl->expected_tpt[rs_index]; - else - tpt = 0; - rs_collect_tx_data(search_win, rs_index, tpt, 1, 0); - - /* Else if type matches "current/active" table, - * add failure to "current/active" history */ - } else if ((tbl_type.lq_type == curr_tbl->lq_type) && - (tbl_type.antenna_type == curr_tbl->antenna_type) && - (tbl_type.is_SGI == curr_tbl->is_SGI)) { - if (curr_tbl->expected_tpt) - tpt = curr_tbl->expected_tpt[rs_index]; - else - tpt = 0; - rs_collect_tx_data(window, rs_index, tpt, 1, 0); - } - - /* If not searching for a new mode, increment failed counter - * ... this helps determine when to start searching again */ - if (lq_sta->stay_in_tbl) - lq_sta->total_failed++; - --retries; - index++; - - } - - /* - * Find (by rate) the history window to update with final Tx attempt; - * if Tx was successful first try, use original rate, - * else look up the rate that was, finally, successful. - */ - tx_mcs.rate_n_flags = le32_to_cpu(table->rs_table[index].rate_n_flags); - rs_get_tbl_info_from_mcs(&tx_mcs, priv->band, &tbl_type, &rs_index); - - /* Update frame history window with "success" if Tx got ACKed ... */ - if (tx_resp->flags & IEEE80211_TX_STATUS_ACK) - status = 1; - else - status = 0; - - /* If type matches "search" table, - * add final tx status to "search" history */ - if ((tbl_type.lq_type == search_tbl->lq_type) && - (tbl_type.antenna_type == search_tbl->antenna_type) && - (tbl_type.is_SGI == search_tbl->is_SGI)) { - if (search_tbl->expected_tpt) - tpt = search_tbl->expected_tpt[rs_index]; - else - tpt = 0; - if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) - rs_collect_tx_data(search_win, rs_index, tpt, - tx_resp->ampdu_ack_len, - tx_resp->ampdu_ack_map); - else - rs_collect_tx_data(search_win, rs_index, tpt, - 1, status); - /* Else if type matches "current/active" table, - * add final tx status to "current/active" history */ - } else if ((tbl_type.lq_type == curr_tbl->lq_type) && - (tbl_type.antenna_type == curr_tbl->antenna_type) && - (tbl_type.is_SGI == curr_tbl->is_SGI)) { - if (curr_tbl->expected_tpt) - tpt = curr_tbl->expected_tpt[rs_index]; - else - tpt = 0; - if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) - rs_collect_tx_data(window, rs_index, tpt, - tx_resp->ampdu_ack_len, - tx_resp->ampdu_ack_map); - else - rs_collect_tx_data(window, rs_index, tpt, - 1, status); - } - - /* If not searching for new mode, increment success/failed counter - * ... these help determine when to start searching again */ - if (lq_sta->stay_in_tbl) { - if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) { - lq_sta->total_success += tx_resp->ampdu_ack_map; - lq_sta->total_failed += - (tx_resp->ampdu_ack_len - tx_resp->ampdu_ack_map); - } else { - if (status) - lq_sta->total_success++; - else - lq_sta->total_failed++; - } - } - - /* See if there's a better rate or modulation mode to try. */ - rs_rate_scale_perform(priv, dev, hdr, sta); -out: - rcu_read_unlock(); - return; -} - -static u8 rs_is_ant_connected(u8 valid_antenna, - enum iwl4965_antenna_type antenna_type) -{ - if (antenna_type == ANT_AUX) - return ((valid_antenna & 0x2) ? 1:0); - else if (antenna_type == ANT_MAIN) - return ((valid_antenna & 0x1) ? 1:0); - else if (antenna_type == ANT_BOTH) - return ((valid_antenna & 0x3) == 0x3); - - return 1; -} - -static u8 rs_is_other_ant_connected(u8 valid_antenna, - enum iwl4965_antenna_type antenna_type) -{ - if (antenna_type == ANT_AUX) - return rs_is_ant_connected(valid_antenna, ANT_MAIN); - else - return rs_is_ant_connected(valid_antenna, ANT_AUX); - - return 0; -} - -/* - * Begin a period of staying with a selected modulation mode. - * Set "stay_in_tbl" flag to prevent any mode switches. - * Set frame tx success limits according to legacy vs. high-throughput, - * and reset overall (spanning all rates) tx success history statistics. - * These control how long we stay using same modulation mode before - * searching for a new mode. - */ -static void rs_set_stay_in_table(u8 is_legacy, - struct iwl4965_lq_sta *lq_sta) -{ - IWL_DEBUG_HT("we are staying in the same table\n"); - lq_sta->stay_in_tbl = 1; /* only place this gets set */ - if (is_legacy) { - lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; - } else { - lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; - } - lq_sta->table_count = 0; - lq_sta->total_failed = 0; - lq_sta->total_success = 0; -} - -/* - * Find correct throughput table for given mode of modulation - */ -static void rs_get_expected_tpt_table(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl) -{ - if (is_legacy(tbl->lq_type)) { - if (!is_a_band(tbl->lq_type)) - tbl->expected_tpt = expected_tpt_G; - else - tbl->expected_tpt = expected_tpt_A; - } else if (is_siso(tbl->lq_type)) { - if (tbl->is_fat && !lq_sta->is_dup) - if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_siso40MHzSGI; - else - tbl->expected_tpt = expected_tpt_siso40MHz; - else if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_siso20MHzSGI; - else - tbl->expected_tpt = expected_tpt_siso20MHz; - - } else if (is_mimo(tbl->lq_type)) { - if (tbl->is_fat && !lq_sta->is_dup) - if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_mimo40MHzSGI; - else - tbl->expected_tpt = expected_tpt_mimo40MHz; - else if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_mimo20MHzSGI; - else - tbl->expected_tpt = expected_tpt_mimo20MHz; - } else - tbl->expected_tpt = expected_tpt_G; -} - -#ifdef CONFIG_IWL4965_HT -/* - * Find starting rate for new "search" high-throughput mode of modulation. - * Goal is to find lowest expected rate (under perfect conditions) that is - * above the current measured throughput of "active" mode, to give new mode - * a fair chance to prove itself without too many challenges. - * - * This gets called when transitioning to more aggressive modulation - * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive - * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need - * to decrease to match "active" throughput. When moving from MIMO to SISO, - * bit rate will typically need to increase, but not if performance was bad. - */ -static s32 rs_get_best_rate(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl, /* "search" */ - u16 rate_mask, s8 index, s8 rate) -{ - /* "active" values */ - struct iwl4965_scale_tbl_info *active_tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - s32 active_sr = active_tbl->win[index].success_ratio; - s32 active_tpt = active_tbl->expected_tpt[index]; - - /* expected "search" throughput */ - s32 *tpt_tbl = tbl->expected_tpt; - - s32 new_rate, high, low, start_hi; - u16 high_low; - - new_rate = high = low = start_hi = IWL_RATE_INVALID; - - for (; ;) { - high_low = rs_get_adjacent_rate(rate, rate_mask, tbl->lq_type); - - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - /* - * Lower the "search" bit rate, to give new "search" mode - * approximately the same throughput as "active" if: - * - * 1) "Active" mode has been working modestly well (but not - * great), and expected "search" throughput (under perfect - * conditions) at candidate rate is above the actual - * measured "active" throughput (but less than expected - * "active" throughput under perfect conditions). - * OR - * 2) "Active" mode has been working perfectly or very well - * and expected "search" throughput (under perfect - * conditions) at candidate rate is above expected - * "active" throughput (under perfect conditions). - */ - if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && - ((active_sr > IWL_RATE_DECREASE_TH) && - (active_sr <= IWL_RATE_HIGH_TH) && - (tpt_tbl[rate] <= active_tpt))) || - ((active_sr >= IWL_RATE_SCALE_SWITCH) && - (tpt_tbl[rate] > active_tpt))) { - - /* (2nd or later pass) - * If we've already tried to raise the rate, and are - * now trying to lower it, use the higher rate. */ - if (start_hi != IWL_RATE_INVALID) { - new_rate = start_hi; - break; - } - - new_rate = rate; - - /* Loop again with lower rate */ - if (low != IWL_RATE_INVALID) - rate = low; - - /* Lower rate not available, use the original */ - else - break; - - /* Else try to raise the "search" rate to match "active" */ - } else { - /* (2nd or later pass) - * If we've already tried to lower the rate, and are - * now trying to raise it, use the lower rate. */ - if (new_rate != IWL_RATE_INVALID) - break; - - /* Loop again with higher rate */ - else if (high != IWL_RATE_INVALID) { - start_hi = high; - rate = high; - - /* Higher rate not available, use the original */ - } else { - break; - } - } - } - - return new_rate; -} -#endif /* CONFIG_IWL4965_HT */ - -static inline u8 rs_is_both_ant_supp(u8 valid_antenna) -{ - return (rs_is_ant_connected(valid_antenna, ANT_BOTH)); -} - -/* - * Set up search table for MIMO - */ -static int rs_switch_to_mimo(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - struct iwl4965_scale_tbl_info *tbl, int index) -{ -#ifdef CONFIG_IWL4965_HT - u16 rate_mask; - s32 rate; - s8 is_green = lq_sta->is_green; - - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || - !sta->ht_info.ht_supported) - return -1; - - IWL_DEBUG_HT("LQ: try to switch to MIMO\n"); - tbl->lq_type = LQ_MIMO; - rs_get_supported_rates(lq_sta, NULL, tbl->lq_type, - &rate_mask); - - if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC) - return -1; - - /* Need both Tx chains/antennas to support MIMO */ - if (!rs_is_both_ant_supp(lq_sta->antenna)) - return -1; - - tbl->is_dup = lq_sta->is_dup; - tbl->action = 0; - if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) - tbl->is_fat = 1; - else - tbl->is_fat = 0; - - if (tbl->is_fat) { - if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - - rs_get_expected_tpt_table(lq_sta, tbl); - - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index, index); - - IWL_DEBUG_HT("LQ: MIMO best rate %d mask %X\n", rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) - return -1; - rs_mcs_from_tbl(&tbl->current_rate, tbl, rate, is_green); - - IWL_DEBUG_HT("LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate.rate_n_flags, is_green); - return 0; -#else - return -1; -#endif /*CONFIG_IWL4965_HT */ -} - -/* - * Set up search table for SISO - */ -static int rs_switch_to_siso(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - struct iwl4965_scale_tbl_info *tbl, int index) -{ -#ifdef CONFIG_IWL4965_HT - u16 rate_mask; - u8 is_green = lq_sta->is_green; - s32 rate; - - IWL_DEBUG_HT("LQ: try to switch to SISO\n"); - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || - !sta->ht_info.ht_supported) - return -1; - - tbl->is_dup = lq_sta->is_dup; - tbl->lq_type = LQ_SISO; - tbl->action = 0; - rs_get_supported_rates(lq_sta, NULL, tbl->lq_type, - &rate_mask); - - if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) - tbl->is_fat = 1; - else - tbl->is_fat = 0; - - if (tbl->is_fat) { - if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - - if (is_green) - tbl->is_SGI = 0; - - rs_get_expected_tpt_table(lq_sta, tbl); - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index, index); - - IWL_DEBUG_HT("LQ: get best rate %d mask %X\n", rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_HT("can not switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - rs_mcs_from_tbl(&tbl->current_rate, tbl, rate, is_green); - IWL_DEBUG_HT("LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate.rate_n_flags, is_green); - return 0; -#else - return -1; - -#endif /*CONFIG_IWL4965_HT */ -} - -/* - * Try to switch to new modulation mode from legacy - */ -static int rs_move_legacy_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - int index) -{ - int ret = 0; - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl4965_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action = tbl->action; - - for (; ;) { - switch (tbl->action) { - case IWL_LEGACY_SWITCH_ANTENNA: - IWL_DEBUG_HT("LQ Legacy switch Antenna\n"); - - search_tbl->lq_type = LQ_NONE; - lq_sta->action_counter++; - - /* Don't change antenna if success has been great */ - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - /* Don't change antenna if other one is not connected */ - if (!rs_is_other_ant_connected(lq_sta->antenna, - tbl->antenna_type)) - break; - - /* Set up search table to try other antenna */ - memcpy(search_tbl, tbl, sz); - - rs_toggle_antenna(&(search_tbl->current_rate), - search_tbl); - rs_get_expected_tpt_table(lq_sta, search_tbl); - lq_sta->search_better_tbl = 1; - goto out; - - case IWL_LEGACY_SWITCH_SISO: - IWL_DEBUG_HT("LQ: Legacy switch to SISO\n"); - - /* Set up search table to try SISO */ - memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_SISO; - search_tbl->is_SGI = 0; - search_tbl->is_fat = 0; - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - lq_sta->action_counter = 0; - goto out; - } - - break; - case IWL_LEGACY_SWITCH_MIMO: - IWL_DEBUG_HT("LQ: Legacy switch MIMO\n"); - - /* Set up search table to try MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_MIMO; - search_tbl->is_SGI = 0; - search_tbl->is_fat = 0; - search_tbl->antenna_type = ANT_BOTH; - ret = rs_switch_to_mimo(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - lq_sta->action_counter = 0; - goto out; - } - break; - } - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA; - - if (tbl->action == start_action) - break; - - } - return 0; - - out: - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA; - return 0; - -} - -/* - * Try to switch to new modulation mode from SISO - */ -static int rs_move_siso_to_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - int index) -{ - int ret; - u8 is_green = lq_sta->is_green; - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl4965_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action = tbl->action; - - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_SISO_SWITCH_ANTENNA: - IWL_DEBUG_HT("LQ: SISO SWITCH ANTENNA SISO\n"); - search_tbl->lq_type = LQ_NONE; - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - if (!rs_is_other_ant_connected(lq_sta->antenna, - tbl->antenna_type)) - break; - - memcpy(search_tbl, tbl, sz); - search_tbl->action = IWL_SISO_SWITCH_MIMO; - rs_toggle_antenna(&(search_tbl->current_rate), - search_tbl); - lq_sta->search_better_tbl = 1; - - goto out; - - case IWL_SISO_SWITCH_MIMO: - IWL_DEBUG_HT("LQ: SISO SWITCH TO MIMO FROM SISO\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_MIMO; - search_tbl->is_SGI = 0; - search_tbl->is_fat = 0; - search_tbl->antenna_type = ANT_BOTH; - ret = rs_switch_to_mimo(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - case IWL_SISO_SWITCH_GI: - IWL_DEBUG_HT("LQ: SISO SWITCH TO GI\n"); - - memcpy(search_tbl, tbl, sz); - search_tbl->action = 0; - if (search_tbl->is_SGI) - search_tbl->is_SGI = 0; - else if (!is_green) - search_tbl->is_SGI = 1; - else - break; - lq_sta->search_better_tbl = 1; - if ((tbl->lq_type == LQ_SISO) && - (tbl->is_SGI)) { - s32 tpt = lq_sta->last_tpt / 100; - if (((!tbl->is_fat) && - (tpt >= expected_tpt_siso20MHz[index])) || - ((tbl->is_fat) && - (tpt >= expected_tpt_siso40MHz[index]))) - lq_sta->search_better_tbl = 0; - } - rs_get_expected_tpt_table(lq_sta, search_tbl); - rs_mcs_from_tbl(&search_tbl->current_rate, - search_tbl, index, is_green); - goto out; - } - tbl->action++; - if (tbl->action > IWL_SISO_SWITCH_GI) - tbl->action = IWL_SISO_SWITCH_ANTENNA; - - if (tbl->action == start_action) - break; - } - return 0; - - out: - tbl->action++; - if (tbl->action > IWL_SISO_SWITCH_GI) - tbl->action = IWL_SISO_SWITCH_ANTENNA; - return 0; -} - -/* - * Try to switch to new modulation mode from MIMO - */ -static int rs_move_mimo_to_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - int index) -{ - int ret; - s8 is_green = lq_sta->is_green; - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action = tbl->action; - - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_MIMO_SWITCH_ANTENNA_A: - case IWL_MIMO_SWITCH_ANTENNA_B: - IWL_DEBUG_HT("LQ: MIMO SWITCH TO SISO\n"); - - - /* Set up new search table for SISO */ - memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_SISO; - search_tbl->is_SGI = 0; - search_tbl->is_fat = 0; - if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A) - search_tbl->antenna_type = ANT_MAIN; - else - search_tbl->antenna_type = ANT_AUX; - - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - - case IWL_MIMO_SWITCH_GI: - IWL_DEBUG_HT("LQ: MIMO SWITCH TO GI\n"); - - /* Set up new search table for MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_MIMO; - search_tbl->antenna_type = ANT_BOTH; - search_tbl->action = 0; - if (search_tbl->is_SGI) - search_tbl->is_SGI = 0; - else - search_tbl->is_SGI = 1; - lq_sta->search_better_tbl = 1; - - /* - * If active table already uses the fastest possible - * modulation (dual stream with short guard interval), - * and it's working well, there's no need to look - * for a better type of modulation! - */ - if ((tbl->lq_type == LQ_MIMO) && - (tbl->is_SGI)) { - s32 tpt = lq_sta->last_tpt / 100; - if (((!tbl->is_fat) && - (tpt >= expected_tpt_mimo20MHz[index])) || - ((tbl->is_fat) && - (tpt >= expected_tpt_mimo40MHz[index]))) - lq_sta->search_better_tbl = 0; - } - rs_get_expected_tpt_table(lq_sta, search_tbl); - rs_mcs_from_tbl(&search_tbl->current_rate, - search_tbl, index, is_green); - goto out; - - } - tbl->action++; - if (tbl->action > IWL_MIMO_SWITCH_GI) - tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; - - if (tbl->action == start_action) - break; - } - - return 0; - out: - tbl->action++; - if (tbl->action > IWL_MIMO_SWITCH_GI) - tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; - return 0; - -} - -/* - * Check whether we should continue using same modulation mode, or - * begin search for a new mode, based on: - * 1) # tx successes or failures while using this mode - * 2) # times calling this function - * 3) elapsed time in this mode (not used, for now) - */ -static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta) -{ - struct iwl4965_scale_tbl_info *tbl; - int i; - int active_tbl; - int flush_interval_passed = 0; - - active_tbl = lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - /* If we've been disallowing search, see if we should now allow it */ - if (lq_sta->stay_in_tbl) { - - /* Elapsed time using current modulation mode */ - if (lq_sta->flush_timer) - flush_interval_passed = - time_after(jiffies, - (unsigned long)(lq_sta->flush_timer + - IWL_RATE_SCALE_FLUSH_INTVL)); - - /* For now, disable the elapsed time criterion */ - flush_interval_passed = 0; - - /* - * Check if we should allow search for new modulation mode. - * If many frames have failed or succeeded, or we've used - * this same modulation for a long time, allow search, and - * reset history stats that keep track of whether we should - * allow a new search. Also (below) reset all bitmaps and - * stats in active history. - */ - if ((lq_sta->total_failed > lq_sta->max_failure_limit) || - (lq_sta->total_success > lq_sta->max_success_limit) || - ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) - && (flush_interval_passed))) { - IWL_DEBUG_HT("LQ: stay is expired %d %d %d\n:", - lq_sta->total_failed, - lq_sta->total_success, - flush_interval_passed); - - /* Allow search for new mode */ - lq_sta->stay_in_tbl = 0; /* only place reset */ - lq_sta->total_failed = 0; - lq_sta->total_success = 0; - lq_sta->flush_timer = 0; - - /* - * Else if we've used this modulation mode enough repetitions - * (regardless of elapsed time or success/failure), reset - * history bitmaps and rate-specific stats for all rates in - * active table. - */ - } else { - lq_sta->table_count++; - if (lq_sta->table_count >= - lq_sta->table_count_limit) { - lq_sta->table_count = 0; - - IWL_DEBUG_HT("LQ: stay in table clear win\n"); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window( - &(tbl->win[i])); - } - } - - /* If transitioning to allow "search", reset all history - * bitmaps and stats in active table (this will become the new - * "search" table). */ - if (!lq_sta->stay_in_tbl) { - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - } - } -} - -/* - * Do rate scaling and search for new modulation mode. - */ -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct net_device *dev, - struct ieee80211_hdr *hdr, - struct sta_info *sta) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw *hw = local_to_hw(local); - struct ieee80211_conf *conf = &hw->conf; - int low = IWL_RATE_INVALID; - int high = IWL_RATE_INVALID; - int index; - int i; - struct iwl4965_rate_scale_data *window = NULL; - int current_tpt = IWL_INVALID_VALUE; - int low_tpt = IWL_INVALID_VALUE; - int high_tpt = IWL_INVALID_VALUE; - u32 fail_count; - s8 scale_action = 0; - u16 fc, rate_mask; - u8 update_lq = 0; - struct iwl4965_lq_sta *lq_sta; - struct iwl4965_scale_tbl_info *tbl, *tbl1; - u16 rate_scale_index_msk = 0; - struct iwl4965_rate mcs_rate; - u8 is_green = 0; - u8 active_tbl = 0; - u8 done_search = 0; - u16 high_low; -#ifdef CONFIG_IWL4965_HT - u8 tid = MAX_TID_COUNT; - __le16 *qc; -#endif - - IWL_DEBUG_RATE("rate scale calculate new rate for skb\n"); - - fc = le16_to_cpu(hdr->frame_control); - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) { - /* Send management frames and broadcast/multicast data using - * lowest rate. */ - /* TODO: this could probably be improved.. */ - return; - } - - if (!sta || !sta->rate_ctrl_priv) - return; - - if (!priv->lq_mngr.lq_ready) { - IWL_DEBUG_RATE("still rate scaling not ready\n"); - return; - } - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - -#ifdef CONFIG_IWL4965_HT - qc = ieee80211_get_qos_ctrl(hdr); - if (qc) { - tid = (u8)(le16_to_cpu(*qc) & 0xf); - rs_tl_add_packet(lq_sta, tid); - } -#endif - /* - * Select rate-scale / modulation-mode table to work with in - * the rest of this function: "search" if searching for better - * modulation mode, or "active" if doing rate scaling within a mode. - */ - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - is_green = lq_sta->is_green; - - /* current tx rate */ - index = sta->last_txrate_idx; - - IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index, - tbl->lq_type); - - /* rates available for this association, and for modulation mode */ - rs_get_supported_rates(lq_sta, hdr, tbl->lq_type, - &rate_mask); - - IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask); - - /* mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - if (lq_sta->band == IEEE80211_BAND_5GHZ) - /* supp_rates has no CCK bits in A mode */ - rate_scale_index_msk = (u16) (rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_scale_index_msk = (u16) (rate_mask & - lq_sta->supp_rates); - - } else - rate_scale_index_msk = rate_mask; - - if (!rate_scale_index_msk) - rate_scale_index_msk = rate_mask; - - /* If current rate is no longer supported on current association, - * or user changed preferences for rates, find a new supported rate. */ - if (index < 0 || !((1 << index) & rate_scale_index_msk)) { - index = IWL_INVALID_VALUE; - update_lq = 1; - - /* get the highest available rate */ - for (i = 0; i <= IWL_RATE_COUNT; i++) { - if ((1 << i) & rate_scale_index_msk) - index = i; - } - - if (index == IWL_INVALID_VALUE) { - IWL_WARNING("Can not find a suitable rate\n"); - return; - } - } - - /* Get expected throughput table and history window for current rate */ - if (!tbl->expected_tpt) - rs_get_expected_tpt_table(lq_sta, tbl); - - window = &(tbl->win[index]); - - /* - * If there is not enough history to calculate actual average - * throughput, keep analyzing results of more tx frames, without - * changing rate or mode (bypass most of the rest of this function). - * Set up new rate table in uCode only if old rate is not supported - * in current association (use new rate found above). - */ - fail_count = window->counter - window->success_counter; - if (((fail_count < IWL_RATE_MIN_FAILURE_TH) && - (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) - || (tbl->expected_tpt == NULL)) { - IWL_DEBUG_RATE("LQ: still below TH succ %d total %d " - "for index %d\n", - window->success_counter, window->counter, index); - - /* Can't calculate this yet; not enough history */ - window->average_tpt = IWL_INVALID_VALUE; - - /* Should we stay with this modulation mode, - * or search for a new one? */ - rs_stay_in_table(lq_sta); - - /* Set up new rate table in uCode, if needed */ - if (update_lq) { - rs_mcs_from_tbl(&mcs_rate, tbl, index, is_green); - rs_fill_link_cmd(lq_sta, &mcs_rate, &lq_sta->lq); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - } - goto out; - - /* Else we have enough samples; calculate estimate of - * actual average throughput */ - } else - window->average_tpt = ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128); - - /* If we are searching for better modulation mode, check success. */ - if (lq_sta->search_better_tbl) { - int success_limit = IWL_RATE_SCALE_SWITCH; - - /* If good success, continue using the "search" mode; - * no need to send new link quality command, since we're - * continuing to use the setup that we've been trying. */ - if ((window->success_ratio > success_limit) || - (window->average_tpt > lq_sta->last_tpt)) { - if (!is_legacy(tbl->lq_type)) { - IWL_DEBUG_HT("LQ: we are switching to HT" - " rate suc %d current tpt %d" - " old tpt %d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); - lq_sta->enable_counter = 1; - } - /* Swap tables; "search" becomes "active" */ - lq_sta->active_tbl = active_tbl; - current_tpt = window->average_tpt; - - /* Else poor success; go back to mode in "active" table */ - } else { - /* Nullify "search" table */ - tbl->lq_type = LQ_NONE; - - /* Revert to "active" table */ - active_tbl = lq_sta->active_tbl; - tbl = &(lq_sta->lq_info[active_tbl]); - - /* Revert to "active" rate and throughput info */ - index = iwl4965_hwrate_to_plcp_idx( - tbl->current_rate.rate_n_flags); - current_tpt = lq_sta->last_tpt; - - /* Need to set up a new rate table in uCode */ - update_lq = 1; - IWL_DEBUG_HT("XXY GO BACK TO OLD TABLE\n"); - } - - /* Either way, we've made a decision; modulation mode - * search is done, allow rate adjustment next time. */ - lq_sta->search_better_tbl = 0; - done_search = 1; /* Don't switch modes below! */ - goto lq_update; - } - - /* (Else) not in search of better modulation mode, try for better - * starting rate, while staying in this mode. */ - high_low = rs_get_adjacent_rate(index, rate_scale_index_msk, - tbl->lq_type); - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - /* Collect measured throughputs for current and adjacent rates */ - current_tpt = window->average_tpt; - if (low != IWL_RATE_INVALID) - low_tpt = tbl->win[low].average_tpt; - if (high != IWL_RATE_INVALID) - high_tpt = tbl->win[high].average_tpt; - - /* Assume rate increase */ - scale_action = 1; - - /* Too many failures, decrease rate */ - if ((window->success_ratio <= IWL_RATE_DECREASE_TH) || - (current_tpt == 0)) { - IWL_DEBUG_RATE("decrease rate because of low success_ratio\n"); - scale_action = -1; - - /* No throughput measured yet for adjacent rates; try increase. */ - } else if ((low_tpt == IWL_INVALID_VALUE) && - (high_tpt == IWL_INVALID_VALUE)) - scale_action = 1; - - /* Both adjacent throughputs are measured, but neither one has better - * throughput; we're using the best rate, don't change it! */ - else if ((low_tpt != IWL_INVALID_VALUE) && - (high_tpt != IWL_INVALID_VALUE) && - (low_tpt < current_tpt) && - (high_tpt < current_tpt)) - scale_action = 0; - - /* At least one adjacent rate's throughput is measured, - * and may have better performance. */ - else { - /* Higher adjacent rate's throughput is measured */ - if (high_tpt != IWL_INVALID_VALUE) { - /* Higher rate has better throughput */ - if (high_tpt > current_tpt) - scale_action = 1; - else { - IWL_DEBUG_RATE - ("decrease rate because of high tpt\n"); - scale_action = -1; - } - - /* Lower adjacent rate's throughput is measured */ - } else if (low_tpt != IWL_INVALID_VALUE) { - /* Lower rate has better throughput */ - if (low_tpt > current_tpt) { - IWL_DEBUG_RATE - ("decrease rate because of low tpt\n"); - scale_action = -1; - } else - scale_action = 1; - } - } - - /* Sanity check; asked for decrease, but success rate or throughput - * has been good at old rate. Don't change it. */ - if (scale_action == -1) { - if ((low != IWL_RATE_INVALID) && - ((window->success_ratio > IWL_RATE_HIGH_TH) || - (current_tpt > (100 * tbl->expected_tpt[low])))) - scale_action = 0; - - /* Sanity check; asked for increase, but success rate has not been great - * even at old rate, higher rate will be worse. Don't change it. */ - } else if ((scale_action == 1) && - (window->success_ratio < IWL_RATE_INCREASE_TH)) - scale_action = 0; - - switch (scale_action) { - case -1: - /* Decrease starting rate, update uCode's rate table */ - if (low != IWL_RATE_INVALID) { - update_lq = 1; - index = low; - } - break; - case 1: - /* Increase starting rate, update uCode's rate table */ - if (high != IWL_RATE_INVALID) { - update_lq = 1; - index = high; - } - - break; - case 0: - /* No change */ - default: - break; - } - - IWL_DEBUG_HT("choose rate scale index %d action %d low %d " - "high %d type %d\n", - index, scale_action, low, high, tbl->lq_type); - - lq_update: - /* Replace uCode's rate table for the destination station. */ - if (update_lq) { - rs_mcs_from_tbl(&mcs_rate, tbl, index, is_green); - rs_fill_link_cmd(lq_sta, &mcs_rate, &lq_sta->lq); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - } - - /* Should we stay with this modulation mode, or search for a new one? */ - rs_stay_in_table(lq_sta); - - /* - * Search for new modulation mode if we're: - * 1) Not changing rates right now - * 2) Not just finishing up a search - * 3) Allowing a new search - */ - if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { - /* Save current throughput to compare with "search" throughput*/ - lq_sta->last_tpt = current_tpt; - - /* Select a new "search" modulation mode to try. - * If one is found, set up the new "search" table. */ - if (is_legacy(tbl->lq_type)) - rs_move_legacy_other(priv, lq_sta, conf, sta, index); - else if (is_siso(tbl->lq_type)) - rs_move_siso_to_other(priv, lq_sta, conf, sta, index); - else - rs_move_mimo_to_other(priv, lq_sta, conf, sta, index); - - /* If new "search" mode was selected, set up in uCode table */ - if (lq_sta->search_better_tbl) { - /* Access the "search" table, clear its history. */ - tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - - /* Use new "search" start rate */ - index = iwl4965_hwrate_to_plcp_idx( - tbl->current_rate.rate_n_flags); - - IWL_DEBUG_HT("Switch current mcs: %X index: %d\n", - tbl->current_rate.rate_n_flags, index); - rs_fill_link_cmd(lq_sta, &tbl->current_rate, - &lq_sta->lq); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - } - - /* If the "active" (non-search) mode was legacy, - * and we've tried switching antennas, - * but we haven't been able to try HT modes (not available), - * stay with best antenna legacy modulation for a while - * before next round of mode comparisons. */ - tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); - if (is_legacy(tbl1->lq_type) && -#ifdef CONFIG_IWL4965_HT - (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) && -#endif - (lq_sta->action_counter >= 1)) { - lq_sta->action_counter = 0; - IWL_DEBUG_HT("LQ: STAY in legacy table\n"); - rs_set_stay_in_table(1, lq_sta); - } - - /* If we're in an HT mode, and all 3 mode switch actions - * have been tried and compared, stay in this best modulation - * mode for a while before next round of mode comparisons. */ - if (lq_sta->enable_counter && - (lq_sta->action_counter >= IWL_ACTION_LIMIT)) { -#ifdef CONFIG_IWL4965_HT - if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && - (lq_sta->tx_agg_tid_en & (1 << tid)) && - (tid != MAX_TID_COUNT)) { - IWL_DEBUG_HT("try to aggregate tid %d\n", tid); - rs_tl_turn_on_agg(priv, tid, lq_sta, sta); - } -#endif /*CONFIG_IWL4965_HT */ - lq_sta->action_counter = 0; - rs_set_stay_in_table(0, lq_sta); - } - - /* - * Else, don't search for a new modulation mode. - * Put new timestamp in stay-in-modulation-mode flush timer if: - * 1) Not changing rates right now - * 2) Not just finishing up a search - * 3) flush timer is empty - */ - } else { - if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer)) - lq_sta->flush_timer = jiffies; - } - -out: - rs_mcs_from_tbl(&tbl->current_rate, tbl, index, is_green); - i = index; - sta->last_txrate_idx = i; - - /* sta->txrate_idx is an index to A mode rates which start - * at IWL_FIRST_OFDM_RATE - */ - if (lq_sta->band == IEEE80211_BAND_5GHZ) - sta->txrate_idx = i - IWL_FIRST_OFDM_RATE; - else - sta->txrate_idx = i; - - return; -} - - -static void rs_initialize_lq(struct iwl_priv *priv, - struct ieee80211_conf *conf, - struct sta_info *sta) -{ - int i; - struct iwl4965_lq_sta *lq_sta; - struct iwl4965_scale_tbl_info *tbl; - u8 active_tbl = 0; - int rate_idx; - u8 use_green = rs_use_green(priv, conf); - struct iwl4965_rate mcs_rate; - - if (!sta || !sta->rate_ctrl_priv) - goto out; - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - i = sta->last_txrate_idx; - - if ((lq_sta->lq.sta_id == 0xff) && - (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)) - goto out; - - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - if ((i < 0) || (i >= IWL_RATE_COUNT)) - i = 0; - - mcs_rate.rate_n_flags = iwl4965_rates[i].plcp ; - mcs_rate.rate_n_flags |= RATE_MCS_ANT_B_MSK; - mcs_rate.rate_n_flags &= ~RATE_MCS_ANT_A_MSK; - - if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) - mcs_rate.rate_n_flags |= RATE_MCS_CCK_MSK; - - tbl->antenna_type = ANT_AUX; - rs_get_tbl_info_from_mcs(&mcs_rate, priv->band, tbl, &rate_idx); - if (!rs_is_ant_connected(priv->valid_antenna, tbl->antenna_type)) - rs_toggle_antenna(&mcs_rate, tbl); - - rs_mcs_from_tbl(&mcs_rate, tbl, rate_idx, use_green); - tbl->current_rate.rate_n_flags = mcs_rate.rate_n_flags; - rs_get_expected_tpt_table(lq_sta, tbl); - rs_fill_link_cmd(lq_sta, &mcs_rate, &lq_sta->lq); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - out: - return; -} - -static void rs_get_rate(void *priv_rate, struct net_device *dev, - struct ieee80211_supported_band *sband, - struct sk_buff *skb, - struct rate_selection *sel) -{ - - int i; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct sta_info *sta; - u16 fc; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct iwl4965_lq_sta *lq_sta; - - IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); - - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - - /* Send management frames and broadcast/multicast data using lowest - * rate. */ - fc = le16_to_cpu(hdr->frame_control); - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || - !sta || !sta->rate_ctrl_priv) { - sel->rate = rate_lowest(local, sband, sta); - goto out; - } - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - i = sta->last_txrate_idx; - - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && - !lq_sta->ibss_sta_added) { - u8 sta_id = iwl4965_hw_find_station(priv, hdr->addr1); - DECLARE_MAC_BUF(mac); - - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_RATE("LQ: ADD station %s\n", - print_mac(mac, hdr->addr1)); - sta_id = iwl4965_add_station_flags(priv, hdr->addr1, - 0, CMD_ASYNC, NULL); - } - if ((sta_id != IWL_INVALID_STATION)) { - lq_sta->lq.sta_id = sta_id; - lq_sta->lq.rs_table[0].rate_n_flags = 0; - lq_sta->ibss_sta_added = 1; - rs_initialize_lq(priv, conf, sta); - } - if (!lq_sta->ibss_sta_added) - goto done; - } - -done: - if ((i < 0) || (i > IWL_RATE_COUNT)) { - sel->rate = rate_lowest(local, sband, sta); - goto out; - } - - sel->rate = &priv->ieee_rates[i]; -out: - rcu_read_unlock(); -} - -static void *rs_alloc_sta(void *priv, gfp_t gfp) -{ - struct iwl4965_lq_sta *lq_sta; - int i, j; - - IWL_DEBUG_RATE("create station rate scale window\n"); - - lq_sta = kzalloc(sizeof(struct iwl4965_lq_sta), gfp); - - if (lq_sta == NULL) - return NULL; - lq_sta->lq.sta_id = 0xff; - - - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); - - return lq_sta; -} - -static void rs_rate_init(void *priv_rate, void *priv_sta, - struct ieee80211_local *local, - struct sta_info *sta) -{ - int i, j; - struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_supported_band *sband; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct iwl4965_lq_sta *lq_sta = priv_sta; - - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - - lq_sta->flush_timer = 0; - lq_sta->supp_rates = sta->supp_rates[sband->band]; - sta->txrate_idx = 3; - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); - - IWL_DEBUG_RATE("rate scale global init\n"); - /* TODO: what is a good starting rate for STA? About middle? Maybe not - * the lowest or the highest rate.. Could consider using RSSI from - * previous packets? Need to have IEEE 802.1X auth succeed immediately - * after assoc.. */ - - lq_sta->ibss_sta_added = 0; - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - u8 sta_id = iwl4965_hw_find_station(priv, sta->addr); - DECLARE_MAC_BUF(mac); - - /* for IBSS the call are from tasklet */ - IWL_DEBUG_HT("LQ: ADD station %s\n", - print_mac(mac, sta->addr)); - - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_RATE("LQ: ADD station %s\n", - print_mac(mac, sta->addr)); - sta_id = iwl4965_add_station_flags(priv, sta->addr, - 0, CMD_ASYNC, NULL); - } - if ((sta_id != IWL_INVALID_STATION)) { - lq_sta->lq.sta_id = sta_id; - lq_sta->lq.rs_table[0].rate_n_flags = 0; - } - /* FIXME: this is w/a remove it later */ - priv->assoc_station_added = 1; - } - - /* Find highest tx rate supported by hardware and destination station */ - for (i = 0; i < sband->n_bitrates; i++) - if (sta->supp_rates[sband->band] & BIT(i)) - sta->txrate_idx = i; - - sta->last_txrate_idx = sta->txrate_idx; - /* WTF is with this bogus comment? A doesn't have cck rates */ - /* For MODE_IEEE80211A, cck rates are at end of rate table */ - if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) - sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; - - lq_sta->is_dup = 0; - lq_sta->valid_antenna = priv->valid_antenna; - lq_sta->antenna = priv->antenna; - lq_sta->is_green = rs_use_green(priv, conf); - lq_sta->active_rate = priv->active_rate; - lq_sta->active_rate &= ~(0x1000); - lq_sta->active_rate_basic = priv->active_rate_basic; - lq_sta->band = priv->band; -#ifdef CONFIG_IWL4965_HT - /* - * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), - * supp_rates[] does not; shift to convert format, force 9 MBits off. - */ - lq_sta->active_siso_rate = (priv->current_ht_config.supp_mcs_set[0] << 1); - lq_sta->active_siso_rate |= - (priv->current_ht_config.supp_mcs_set[0] & 0x1); - lq_sta->active_siso_rate &= ~((u16)0x2); - lq_sta->active_siso_rate = - lq_sta->active_siso_rate << IWL_FIRST_OFDM_RATE; - - /* Same here */ - lq_sta->active_mimo_rate = (priv->current_ht_config.supp_mcs_set[1] << 1); - lq_sta->active_mimo_rate |= - (priv->current_ht_config.supp_mcs_set[1] & 0x1); - lq_sta->active_mimo_rate &= ~((u16)0x2); - lq_sta->active_mimo_rate = - lq_sta->active_mimo_rate << IWL_FIRST_OFDM_RATE; - IWL_DEBUG_HT("SISO RATE 0x%X MIMO RATE 0x%X\n", - lq_sta->active_siso_rate, - lq_sta->active_mimo_rate); - /* as default allow aggregation for all tids */ - lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; -#endif /*CONFIG_IWL4965_HT*/ -#ifdef CONFIG_MAC80211_DEBUGFS - lq_sta->drv = priv; -#endif - - if (priv->assoc_station_added) - priv->lq_mngr.lq_ready = 1; - - rs_initialize_lq(priv, conf, sta); -} - -static void rs_fill_link_cmd(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *tx_mcs, - struct iwl_link_quality_cmd *lq_cmd) -{ - int index = 0; - int rate_idx; - int repeat_rate = 0; - u8 ant_toggle_count = 0; - u8 use_ht_possible = 1; - struct iwl4965_rate new_rate; - struct iwl4965_scale_tbl_info tbl_type = { 0 }; - - /* Override starting rate (index 0) if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, tx_mcs, index); - - /* Interpret rate_n_flags */ - rs_get_tbl_info_from_mcs(tx_mcs, lq_sta->band, - &tbl_type, &rate_idx); - - /* How many times should we repeat the initial rate? */ - if (is_legacy(tbl_type.lq_type)) { - ant_toggle_count = 1; - repeat_rate = IWL_NUMBER_TRY; - } else - repeat_rate = IWL_HT_NUMBER_TRY; - - lq_cmd->general_params.mimo_delimiter = - is_mimo(tbl_type.lq_type) ? 1 : 0; - - /* Fill 1st table entry (index 0) */ - lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(tx_mcs->rate_n_flags); - new_rate.rate_n_flags = tx_mcs->rate_n_flags; - - if (is_mimo(tbl_type.lq_type) || (tbl_type.antenna_type == ANT_MAIN)) - lq_cmd->general_params.single_stream_ant_msk - = LINK_QUAL_ANT_A_MSK; - else - lq_cmd->general_params.single_stream_ant_msk - = LINK_QUAL_ANT_B_MSK; - - index++; - repeat_rate--; - - /* Fill rest of rate table */ - while (index < LINK_QUAL_MAX_RETRY_NUM) { - /* Repeat initial/next rate. - * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. - * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ - while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_count < - NUM_TRY_BEFORE_ANTENNA_TOGGLE) - ant_toggle_count++; - else { - rs_toggle_antenna(&new_rate, &tbl_type); - ant_toggle_count = 1; - } - } - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(new_rate.rate_n_flags); - repeat_rate--; - index++; - } - - rs_get_tbl_info_from_mcs(&new_rate, lq_sta->band, &tbl_type, - &rate_idx); - - /* Indicate to uCode which entries might be MIMO. - * If initial rate was MIMO, this will finally end up - * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ - if (is_mimo(tbl_type.lq_type)) - lq_cmd->general_params.mimo_delimiter = index; - - /* Get next rate */ - rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, - use_ht_possible, &new_rate); - - /* How many times should we repeat the next rate? */ - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_count < NUM_TRY_BEFORE_ANTENNA_TOGGLE) - ant_toggle_count++; - else { - rs_toggle_antenna(&new_rate, &tbl_type); - ant_toggle_count = 1; - } - repeat_rate = IWL_NUMBER_TRY; - } else - repeat_rate = IWL_HT_NUMBER_TRY; - - /* Don't allow HT rates after next pass. - * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ - use_ht_possible = 0; - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(new_rate.rate_n_flags); - - index++; - repeat_rate--; - } - - lq_cmd->general_params.dual_stream_ant_msk = 3; - lq_cmd->agg_params.agg_dis_start_th = 3; - lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000); -} - -static void *rs_alloc(struct ieee80211_local *local) -{ - return local->hw.priv; -} -/* rate scale requires free function to be implemented */ -static void rs_free(void *priv_rate) -{ - return; -} - -static void rs_clear(void *priv_rate) -{ - struct iwl_priv *priv = (struct iwl_priv *) priv_rate; - - IWL_DEBUG_RATE("enter\n"); - - priv->lq_mngr.lq_ready = 0; - - IWL_DEBUG_RATE("leave\n"); -} - -static void rs_free_sta(void *priv, void *priv_sta) -{ - struct iwl4965_lq_sta *lq_sta = priv_sta; - - IWL_DEBUG_RATE("enter\n"); - kfree(lq_sta); - IWL_DEBUG_RATE("leave\n"); -} - - -#ifdef CONFIG_MAC80211_DEBUGFS -static int open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *mcs, int index) -{ - u32 base_rate; - - if (lq_sta->band == IEEE80211_BAND_5GHZ) - base_rate = 0x800D; - else - base_rate = 0x820A; - - if (lq_sta->dbg_fixed.rate_n_flags) { - if (index < 12) - mcs->rate_n_flags = lq_sta->dbg_fixed.rate_n_flags; - else - mcs->rate_n_flags = base_rate; - IWL_DEBUG_RATE("Fixed rate ON\n"); - return; - } - - IWL_DEBUG_RATE("Fixed rate OFF\n"); -} - -static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, - const char __user *user_buf, size_t count, loff_t *ppos) -{ - struct iwl4965_lq_sta *lq_sta = file->private_data; - char buf[64]; - int buf_size; - u32 parsed_rate; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - if (sscanf(buf, "%x", &parsed_rate) == 1) - lq_sta->dbg_fixed.rate_n_flags = parsed_rate; - else - lq_sta->dbg_fixed.rate_n_flags = 0; - - lq_sta->active_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ - lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - - IWL_DEBUG_RATE("sta_id %d rate 0x%X\n", - lq_sta->lq.sta_id, lq_sta->dbg_fixed.rate_n_flags); - - if (lq_sta->dbg_fixed.rate_n_flags) { - rs_fill_link_cmd(lq_sta, &lq_sta->dbg_fixed, &lq_sta->lq); - iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC); - } - - return count; -} - -static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char buff[1024]; - int desc = 0; - int i = 0; - - struct iwl4965_lq_sta *lq_sta = file->private_data; - - desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); - desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", - lq_sta->total_failed, lq_sta->total_success, - lq_sta->active_rate); - desc += sprintf(buff+desc, "fixed rate 0x%X\n", - lq_sta->dbg_fixed.rate_n_flags); - desc += sprintf(buff+desc, "general:" - "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", - lq_sta->lq.general_params.flags, - lq_sta->lq.general_params.mimo_delimiter, - lq_sta->lq.general_params.single_stream_ant_msk, - lq_sta->lq.general_params.dual_stream_ant_msk); - - desc += sprintf(buff+desc, "agg:" - "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", - le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), - lq_sta->lq.agg_params.agg_dis_start_th, - lq_sta->lq.agg_params.agg_frame_cnt_limit); - - desc += sprintf(buff+desc, - "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", - lq_sta->lq.general_params.start_rate_index[0], - lq_sta->lq.general_params.start_rate_index[1], - lq_sta->lq.general_params.start_rate_index[2], - lq_sta->lq.general_params.start_rate_index[3]); - - - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) - desc += sprintf(buff+desc, " rate[%d] 0x%X\n", - i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags)); - - return simple_read_from_buffer(user_buf, count, ppos, buff, desc); -} - -static const struct file_operations rs_sta_dbgfs_scale_table_ops = { - .write = rs_sta_dbgfs_scale_table_write, - .read = rs_sta_dbgfs_scale_table_read, - .open = open_file_generic, -}; -static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char buff[1024]; - int desc = 0; - int i, j; - - struct iwl4965_lq_sta *lq_sta = file->private_data; - for (i = 0; i < LQ_SIZE; i++) { - desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n" - "rate=0x%X\n", - lq_sta->active_tbl == i?"*":"x", - lq_sta->lq_info[i].lq_type, - lq_sta->lq_info[i].is_SGI, - lq_sta->lq_info[i].is_fat, - lq_sta->lq_info[i].is_dup, - lq_sta->lq_info[i].current_rate.rate_n_flags); - for (j = 0; j < IWL_RATE_COUNT; j++) { - desc += sprintf(buff+desc, - "counter=%d success=%d %%=%d\n", - lq_sta->lq_info[i].win[j].counter, - lq_sta->lq_info[i].win[j].success_counter, - lq_sta->lq_info[i].win[j].success_ratio); - } - } - return simple_read_from_buffer(user_buf, count, ppos, buff, desc); -} - -static const struct file_operations rs_sta_dbgfs_stats_table_ops = { - .read = rs_sta_dbgfs_stats_table_read, - .open = open_file_generic, -}; - -static void rs_add_debugfs(void *priv, void *priv_sta, - struct dentry *dir) -{ - struct iwl4965_lq_sta *lq_sta = priv_sta; - lq_sta->rs_sta_dbgfs_scale_table_file = - debugfs_create_file("rate_scale_table", 0600, dir, - lq_sta, &rs_sta_dbgfs_scale_table_ops); - lq_sta->rs_sta_dbgfs_stats_table_file = - debugfs_create_file("rate_stats_table", 0600, dir, - lq_sta, &rs_sta_dbgfs_stats_table_ops); -#ifdef CONFIG_IWL4965_HT - lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = - debugfs_create_u8("tx_agg_tid_enable", 0600, dir, - &lq_sta->tx_agg_tid_en); -#endif - -} - -static void rs_remove_debugfs(void *priv, void *priv_sta) -{ - struct iwl4965_lq_sta *lq_sta = priv_sta; - debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); -#ifdef CONFIG_IWL4965_HT - debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); -#endif -} -#endif - -static struct rate_control_ops rs_ops = { - .module = NULL, - .name = RS_NAME, - .tx_status = rs_tx_status, - .get_rate = rs_get_rate, - .rate_init = rs_rate_init, - .clear = rs_clear, - .alloc = rs_alloc, - .free = rs_free, - .alloc_sta = rs_alloc_sta, - .free_sta = rs_free_sta, -#ifdef CONFIG_MAC80211_DEBUGFS - .add_sta_debugfs = rs_add_debugfs, - .remove_sta_debugfs = rs_remove_debugfs, -#endif -}; - -int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct iwl_priv *priv = hw->priv; - struct iwl4965_lq_sta *lq_sta; - struct sta_info *sta; - int cnt = 0, i; - u32 samples = 0, success = 0, good = 0; - unsigned long now = jiffies; - u32 max_time = 0; - u8 lq_type, antenna; - - rcu_read_lock(); - - sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr); - if (!sta || !sta->rate_ctrl_priv) { - if (sta) - IWL_DEBUG_RATE("leave - no private rate data!\n"); - else - IWL_DEBUG_RATE("leave - no station!\n"); - rcu_read_unlock(); - return sprintf(buf, "station %d not found\n", sta_id); - } - - lq_sta = (void *)sta->rate_ctrl_priv; - - lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type; - antenna = lq_sta->lq_info[lq_sta->active_tbl].antenna_type; - - if (is_legacy(lq_type)) - i = IWL_RATE_54M_INDEX; - else - i = IWL_RATE_60M_INDEX; - while (1) { - u64 mask; - int j; - int active = lq_sta->active_tbl; - - cnt += - sprintf(&buf[cnt], " %2dMbs: ", iwl4965_rates[i].ieee / 2); - - mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1)); - for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1) - buf[cnt++] = - (lq_sta->lq_info[active].win[i].data & mask) - ? '1' : '0'; - - samples += lq_sta->lq_info[active].win[i].counter; - good += lq_sta->lq_info[active].win[i].success_counter; - success += lq_sta->lq_info[active].win[i].success_counter * - iwl4965_rates[i].ieee; - - if (lq_sta->lq_info[active].win[i].stamp) { - int delta = - jiffies_to_msecs(now - - lq_sta->lq_info[active].win[i].stamp); - - if (delta > max_time) - max_time = delta; - - cnt += sprintf(&buf[cnt], "%5dms\n", delta); - } else - buf[cnt++] = '\n'; - - j = iwl4965_get_prev_ieee_rate(i); - if (j == i) - break; - i = j; - } - - /* Display the average rate of all samples taken. - * - * NOTE: We multiply # of samples by 2 since the IEEE measurement - * added from iwl4965_rates is actually 2X the rate */ - if (samples) - cnt += sprintf(&buf[cnt], - "\nAverage rate is %3d.%02dMbs over last %4dms\n" - "%3d%% success (%d good packets over %d tries)\n", - success / (2 * samples), (success * 5 / samples) % 10, - max_time, good * 100 / samples, good, samples); - else - cnt += sprintf(&buf[cnt], "\nAverage rate: 0Mbs\n"); - - cnt += sprintf(&buf[cnt], "\nrate scale type %d antenna %d " - "active_search %d rate index %d\n", lq_type, antenna, - lq_sta->search_better_tbl, sta->last_txrate_idx); - - rcu_read_unlock(); - return cnt; -} - -void iwl4965_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id) -{ - struct iwl_priv *priv = hw->priv; - - priv->lq_mngr.lq_ready = 1; -} - -int iwl4965_rate_control_register(void) -{ - return ieee80211_rate_control_register(&rs_ops); -} - -void iwl4965_rate_control_unregister(void) -{ - ieee80211_rate_control_unregister(&rs_ops); -} - diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h b/drivers/net/wireless/iwlwifi/iwl-4965-rs.h index 866e378..e69de29 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.h @@ -1,301 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * James P. Ketrenos <ipw2100-admin@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#ifndef __iwl_4965_rs_h__ -#define __iwl_4965_rs_h__ - -#include "iwl-4965.h" - -struct iwl4965_rate_info { - u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ - u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ - u8 plcp_mimo; /* uCode API: IWL_RATE_MIMO_6M_PLCP, etc. */ - u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ - u8 prev_ieee; /* previous rate in IEEE speeds */ - u8 next_ieee; /* next rate in IEEE speeds */ - u8 prev_rs; /* previous rate used in rs algo */ - u8 next_rs; /* next rate used in rs algo */ - u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ - u8 next_rs_tgg; /* next rate used in TGG rs algo */ -}; - -/* - * These serve as indexes into - * struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT]; - */ -enum { - IWL_RATE_1M_INDEX = 0, - IWL_RATE_2M_INDEX, - IWL_RATE_5M_INDEX, - IWL_RATE_11M_INDEX, - IWL_RATE_6M_INDEX, - IWL_RATE_9M_INDEX, - IWL_RATE_12M_INDEX, - IWL_RATE_18M_INDEX, - IWL_RATE_24M_INDEX, - IWL_RATE_36M_INDEX, - IWL_RATE_48M_INDEX, - IWL_RATE_54M_INDEX, - IWL_RATE_60M_INDEX, - IWL_RATE_COUNT, - IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, - IWL_RATE_INVALID = IWL_RATE_INVM_INDEX -}; - -enum { - IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, - IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, - IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, - IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, -}; - -/* #define vs. enum to keep from defaulting to 'large integer' */ -#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX) -#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX) -#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX) -#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX) -#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX) -#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX) -#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX) -#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX) -#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX) -#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX) -#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX) -#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) -#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) - -/* 4965 uCode API values for legacy bit rates, both OFDM and CCK */ -enum { - IWL_RATE_6M_PLCP = 13, - IWL_RATE_9M_PLCP = 15, - IWL_RATE_12M_PLCP = 5, - IWL_RATE_18M_PLCP = 7, - IWL_RATE_24M_PLCP = 9, - IWL_RATE_36M_PLCP = 11, - IWL_RATE_48M_PLCP = 1, - IWL_RATE_54M_PLCP = 3, - IWL_RATE_60M_PLCP = 3, - IWL_RATE_1M_PLCP = 10, - IWL_RATE_2M_PLCP = 20, - IWL_RATE_5M_PLCP = 55, - IWL_RATE_11M_PLCP = 110, -}; - -/* 4965 uCode API values for OFDM high-throughput (HT) bit rates */ -enum { - IWL_RATE_SISO_6M_PLCP = 0, - IWL_RATE_SISO_12M_PLCP = 1, - IWL_RATE_SISO_18M_PLCP = 2, - IWL_RATE_SISO_24M_PLCP = 3, - IWL_RATE_SISO_36M_PLCP = 4, - IWL_RATE_SISO_48M_PLCP = 5, - IWL_RATE_SISO_54M_PLCP = 6, - IWL_RATE_SISO_60M_PLCP = 7, - IWL_RATE_MIMO_6M_PLCP = 0x8, - IWL_RATE_MIMO_12M_PLCP = 0x9, - IWL_RATE_MIMO_18M_PLCP = 0xa, - IWL_RATE_MIMO_24M_PLCP = 0xb, - IWL_RATE_MIMO_36M_PLCP = 0xc, - IWL_RATE_MIMO_48M_PLCP = 0xd, - IWL_RATE_MIMO_54M_PLCP = 0xe, - IWL_RATE_MIMO_60M_PLCP = 0xf, - IWL_RATE_SISO_INVM_PLCP, - IWL_RATE_MIMO_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, -}; - -/* MAC header values for bit rates */ -enum { - IWL_RATE_6M_IEEE = 12, - IWL_RATE_9M_IEEE = 18, - IWL_RATE_12M_IEEE = 24, - IWL_RATE_18M_IEEE = 36, - IWL_RATE_24M_IEEE = 48, - IWL_RATE_36M_IEEE = 72, - IWL_RATE_48M_IEEE = 96, - IWL_RATE_54M_IEEE = 108, - IWL_RATE_60M_IEEE = 120, - IWL_RATE_1M_IEEE = 2, - IWL_RATE_2M_IEEE = 4, - IWL_RATE_5M_IEEE = 11, - IWL_RATE_11M_IEEE = 22, -}; - -#define IWL_CCK_BASIC_RATES_MASK \ - (IWL_RATE_1M_MASK | \ - IWL_RATE_2M_MASK) - -#define IWL_CCK_RATES_MASK \ - (IWL_BASIC_RATES_MASK | \ - IWL_RATE_5M_MASK | \ - IWL_RATE_11M_MASK) - -#define IWL_OFDM_BASIC_RATES_MASK \ - (IWL_RATE_6M_MASK | \ - IWL_RATE_12M_MASK | \ - IWL_RATE_24M_MASK) - -#define IWL_OFDM_RATES_MASK \ - (IWL_OFDM_BASIC_RATES_MASK | \ - IWL_RATE_9M_MASK | \ - IWL_RATE_18M_MASK | \ - IWL_RATE_36M_MASK | \ - IWL_RATE_48M_MASK | \ - IWL_RATE_54M_MASK) - -#define IWL_BASIC_RATES_MASK \ - (IWL_OFDM_BASIC_RATES_MASK | \ - IWL_CCK_BASIC_RATES_MASK) - -#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) - -#define IWL_INVALID_VALUE -1 - -#define IWL_MIN_RSSI_VAL -100 -#define IWL_MAX_RSSI_VAL 0 - -/* These values specify how many Tx frame attempts before - * searching for a new modulation mode */ -#define IWL_LEGACY_FAILURE_LIMIT 160 -#define IWL_LEGACY_SUCCESS_LIMIT 480 -#define IWL_LEGACY_TABLE_COUNT 160 - -#define IWL_NONE_LEGACY_FAILURE_LIMIT 400 -#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500 -#define IWL_NONE_LEGACY_TABLE_COUNT 1500 - -/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ -#define IWL_RS_GOOD_RATIO 12800 /* 100% */ -#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */ -#define IWL_RATE_HIGH_TH 10880 /* 85% */ -#define IWL_RATE_INCREASE_TH 8960 /* 70% */ -#define IWL_RATE_DECREASE_TH 1920 /* 15% */ - -/* possible actions when in legacy mode */ -#define IWL_LEGACY_SWITCH_ANTENNA 0 -#define IWL_LEGACY_SWITCH_SISO 1 -#define IWL_LEGACY_SWITCH_MIMO 2 - -/* possible actions when in siso mode */ -#define IWL_SISO_SWITCH_ANTENNA 0 -#define IWL_SISO_SWITCH_MIMO 1 -#define IWL_SISO_SWITCH_GI 2 - -/* possible actions when in mimo mode */ -#define IWL_MIMO_SWITCH_ANTENNA_A 0 -#define IWL_MIMO_SWITCH_ANTENNA_B 1 -#define IWL_MIMO_SWITCH_GI 2 - -#define IWL_ACTION_LIMIT 3 /* # possible actions */ - -#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ - -/* load per tid defines for A-MPDU activation */ -#define IWL_AGG_TPT_THREHOLD 0 -#define IWL_AGG_LOAD_THRESHOLD 10 -#define IWL_AGG_ALL_TID 0xff -#define TID_QUEUE_CELL_SPACING 50 /*mS */ -#define TID_QUEUE_MAX_SIZE 20 -#define TID_ROUND_VALUE 5 /* mS */ -#define TID_MAX_LOAD_COUNT 8 - -#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) -#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) - -extern const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT]; - -enum iwl4965_table_type { - LQ_NONE, - LQ_G, /* legacy types */ - LQ_A, - LQ_SISO, /* high-throughput types */ - LQ_MIMO, - LQ_MAX, -}; - -#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) -#define is_siso(tbl) (((tbl) == LQ_SISO)) -#define is_mimo(tbl) (((tbl) == LQ_MIMO)) -#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) -#define is_a_band(tbl) (((tbl) == LQ_A)) -#define is_g_and(tbl) (((tbl) == LQ_G)) - -/* 4965 has 2 antennas/chains for Tx (but 3 for Rx) */ -enum iwl4965_antenna_type { - ANT_NONE, - ANT_MAIN, - ANT_AUX, - ANT_BOTH, -}; - -static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index) -{ - u8 rate = iwl4965_rates[rate_index].prev_ieee; - - if (rate == IWL_RATE_INVALID) - rate = rate_index; - return rate; -} - -extern int iwl4965_hwrate_to_plcp_idx(u32 rate_n_flags); - -/** - * iwl4965_fill_rs_info - Fill an output text buffer with the rate representation - * - * NOTE: This is provided as a quick mechanism for a user to visualize - * the performance of the rate control algorithm and is not meant to be - * parsed software. - */ -extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id); - -/** - * iwl4965_rate_scale_init - Initialize the rate scale table based on assoc info - * - * The specific throughput table used is based on the type of network - * the associated with, including A, B, G, and G w/ TGG protection - */ -extern void iwl4965_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id); - -/** - * iwl4965_rate_control_register - Register the rate control algorithm callbacks - * - * Since the rate control algorithm is hardware specific, there is no need - * or reason to place it as a stand alone module. The driver can call - * iwl4965_rate_control_register in order to register the rate control callbacks - * with the mac80211 subsystem. This should be performed prior to calling - * ieee80211_register_hw - * - */ -extern int iwl4965_rate_control_register(void); - -/** - * iwl4965_rate_control_unregister - Unregister the rate control callbacks - * - * This should be called after calling ieee80211_unregister_hw, but before - * the driver is unloaded. - */ -extern void iwl4965_rate_control_unregister(void); - -#endif diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 39bfeaa..aa829f7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -39,81 +39,33 @@ #include <asm/unaligned.h> #include "iwl-eeprom.h" -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-io.h" #include "iwl-helpers.h" +#include "iwl-calib.h" +#include "iwl-sta.h" + +static int iwl4965_send_tx_power(struct iwl_priv *priv); +static int iwl4965_hw_get_temperature(const struct iwl_priv *priv); + +/* Change firmware file name, using "-" and incrementing number, + * *only* when uCode interface or architecture changes so that it + * is not compatible with earlier drivers. + * This number will also appear in << 8 position of 1st dword of uCode file */ +#define IWL4965_UCODE_API "-2" + /* module parameters */ static struct iwl_mod_params iwl4965_mod_params = { - .num_of_queues = IWL4965_MAX_NUM_QUEUES, + .num_of_queues = IWL49_NUM_QUEUES, + .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES, .enable_qos = 1, .amsdu_size_8K = 1, + .restart_fw = 1, /* the rest are 0 by default */ }; -static void iwl4965_hw_card_show_info(struct iwl_priv *priv); - -#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ - [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ - IWL_RATE_SISO_##s##M_PLCP, \ - IWL_RATE_MIMO_##s##M_PLCP, \ - IWL_RATE_##r##M_IEEE, \ - IWL_RATE_##ip##M_INDEX, \ - IWL_RATE_##in##M_INDEX, \ - IWL_RATE_##rp##M_INDEX, \ - IWL_RATE_##rn##M_INDEX, \ - IWL_RATE_##pp##M_INDEX, \ - IWL_RATE_##np##M_INDEX } - -/* - * Parameter order: - * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate - * - * If there isn't a valid next or previous rate then INV is used which - * maps to IWL_RATE_INVALID - * - */ -const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT] = { - IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ - IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ - IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ - IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ - IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ - IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ - IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ - IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ - IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ - IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ - IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ - IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ - IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ -}; - -#ifdef CONFIG_IWL4965_HT - -static const u16 default_tid_to_tx_fifo[] = { - IWL_TX_FIFO_AC1, - IWL_TX_FIFO_AC0, - IWL_TX_FIFO_AC0, - IWL_TX_FIFO_AC1, - IWL_TX_FIFO_AC2, - IWL_TX_FIFO_AC2, - IWL_TX_FIFO_AC3, - IWL_TX_FIFO_AC3, - IWL_TX_FIFO_NONE, - IWL_TX_FIFO_NONE, - IWL_TX_FIFO_NONE, - IWL_TX_FIFO_NONE, - IWL_TX_FIFO_NONE, - IWL_TX_FIFO_NONE, - IWL_TX_FIFO_NONE, - IWL_TX_FIFO_NONE, - IWL_TX_FIFO_AC3 -}; - -#endif /*CONFIG_IWL4965_HT */ - /* check contents of special bootstrap uCode SRAM */ static int iwl4965_verify_bsm(struct iwl_priv *priv) { @@ -192,15 +144,18 @@ static int iwl4965_load_bsm(struct iwl_priv *priv) IWL_DEBUG_INFO("Begin load bsm\n"); + priv->ucode_type = UCODE_RT; + /* make sure bootstrap program is no larger than BSM's SRAM size */ if (len > IWL_MAX_BSM_SIZE) return -EINVAL; /* Tell bootstrap uCode where to find the "Initialize" uCode * in host DRAM ... host DRAM physical address bits 35:4 for 4965. - * NOTE: iwl4965_initialize_alive_start() will replace these values, + * NOTE: iwl_init_alive_start() will replace these values, * after the "initialize" uCode has run, to point to - * runtime/protocol instructions and backup data cache. */ + * runtime/protocol instructions and backup data cache. + */ pinst = priv->ucode_init.p_addr >> 4; pdata = priv->ucode_init_data.p_addr >> 4; inst_len = priv->ucode_init.len; @@ -259,274 +214,25 @@ static int iwl4965_load_bsm(struct iwl_priv *priv) return 0; } -static int iwl4965_init_drv(struct iwl_priv *priv) -{ - int ret; - int i; - - priv->antenna = (enum iwl4965_antenna)priv->cfg->mod_params->antenna; - priv->retry_rate = 1; - priv->ibss_beacon = NULL; - - spin_lock_init(&priv->lock); - spin_lock_init(&priv->power_data.lock); - spin_lock_init(&priv->sta_lock); - spin_lock_init(&priv->hcmd_lock); - spin_lock_init(&priv->lq_mngr.lock); - - priv->shared_virt = pci_alloc_consistent(priv->pci_dev, - sizeof(struct iwl4965_shared), - &priv->shared_phys); - - if (!priv->shared_virt) { - ret = -ENOMEM; - goto err; - } - - memset(priv->shared_virt, 0, sizeof(struct iwl4965_shared)); - - - for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) - INIT_LIST_HEAD(&priv->ibss_mac_hash[i]); - - INIT_LIST_HEAD(&priv->free_frames); - - mutex_init(&priv->mutex); - - /* Clear the driver's (not device's) station table */ - iwlcore_clear_stations_table(priv); - - priv->data_retry_limit = -1; - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - - priv->iw_mode = IEEE80211_IF_TYPE_STA; - - priv->use_ant_b_for_management_frame = 1; /* start with ant B */ - priv->valid_antenna = 0x7; /* assume all 3 connected */ - priv->ps_mode = IWL_MIMO_PS_NONE; - - /* Choose which receivers/antennas to use */ - iwl4965_set_rxon_chain(priv); - - iwlcore_reset_qos(priv); - - priv->qos_data.qos_active = 0; - priv->qos_data.qos_cap.val = 0; - - iwlcore_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); - - priv->rates_mask = IWL_RATES_MASK; - /* If power management is turned on, default to AC mode */ - priv->power_mode = IWL_POWER_AC; - priv->user_txpower_limit = IWL_DEFAULT_TX_POWER; - - ret = iwl_init_channel_map(priv); - if (ret) { - IWL_ERROR("initializing regulatory failed: %d\n", ret); - goto err; - } - - ret = iwl4965_init_geos(priv); - if (ret) { - IWL_ERROR("initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - - ret = ieee80211_register_hw(priv->hw); - if (ret) { - IWL_ERROR("Failed to register network device (error %d)\n", - ret); - goto err_free_geos; - } - - priv->hw->conf.beacon_int = 100; - priv->mac80211_registered = 1; - - return 0; - -err_free_geos: - iwl4965_free_geos(priv); -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; -} - -static int is_fat_channel(__le32 rxon_flags) -{ - return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) || - (rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK); -} - -static u8 is_single_stream(struct iwl_priv *priv) -{ -#ifdef CONFIG_IWL4965_HT - if (!priv->current_ht_config.is_ht || - (priv->current_ht_config.supp_mcs_set[1] == 0) || - (priv->ps_mode == IWL_MIMO_PS_STATIC)) - return 1; -#else - return 1; -#endif /*CONFIG_IWL4965_HT */ - return 0; -} - -int iwl4965_hwrate_to_plcp_idx(u32 rate_n_flags) -{ - int idx = 0; - - /* 4965 HT rate format */ - if (rate_n_flags & RATE_MCS_HT_MSK) { - idx = (rate_n_flags & 0xff); - - if (idx >= IWL_RATE_MIMO_6M_PLCP) - idx = idx - IWL_RATE_MIMO_6M_PLCP; - - idx += IWL_FIRST_OFDM_RATE; - /* skip 9M not supported in ht*/ - if (idx >= IWL_RATE_9M_INDEX) - idx += 1; - if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) - return idx; - - /* 4965 legacy rate format, search for match in table */ - } else { - for (idx = 0; idx < ARRAY_SIZE(iwl4965_rates); idx++) - if (iwl4965_rates[idx].plcp == (rate_n_flags & 0xFF)) - return idx; - } - - return -1; -} - /** - * translate ucode response to mac80211 tx status control values - */ -void iwl4965_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, - struct ieee80211_tx_control *control) -{ - int rate_index; - - control->antenna_sel_tx = - ((rate_n_flags & RATE_MCS_ANT_AB_MSK) >> RATE_MCS_ANT_POS); - if (rate_n_flags & RATE_MCS_HT_MSK) - control->flags |= IEEE80211_TXCTL_OFDM_HT; - if (rate_n_flags & RATE_MCS_GF_MSK) - control->flags |= IEEE80211_TXCTL_GREEN_FIELD; - if (rate_n_flags & RATE_MCS_FAT_MSK) - control->flags |= IEEE80211_TXCTL_40_MHZ_WIDTH; - if (rate_n_flags & RATE_MCS_DUP_MSK) - control->flags |= IEEE80211_TXCTL_DUP_DATA; - if (rate_n_flags & RATE_MCS_SGI_MSK) - control->flags |= IEEE80211_TXCTL_SHORT_GI; - /* since iwl4965_hwrate_to_plcp_idx is band indifferent, we always use - * IEEE80211_BAND_2GHZ band as it contains all the rates */ - rate_index = iwl4965_hwrate_to_plcp_idx(rate_n_flags); - if (rate_index == -1) - control->tx_rate = NULL; - else - control->tx_rate = - &priv->bands[IEEE80211_BAND_2GHZ].bitrates[rate_index]; -} - -/* - * Determine how many receiver/antenna chains to use. - * More provides better reception via diversity. Fewer saves power. - * MIMO (dual stream) requires at least 2, but works better with 3. - * This does not determine *which* chains to use, just how many. + * iwl4965_set_ucode_ptrs - Set uCode address location + * + * Tell initialization uCode where to find runtime uCode. + * + * BSM registers initially contain pointers to initialization uCode. + * We need to replace them to load runtime uCode inst and data, + * and to save runtime data when powering down. */ -static int iwl4965_get_rx_chain_counter(struct iwl_priv *priv, - u8 *idle_state, u8 *rx_state) -{ - u8 is_single = is_single_stream(priv); - u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1; - - /* # of Rx chains to use when expecting MIMO. */ - if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) - *rx_state = 2; - else - *rx_state = 3; - - /* # Rx chains when idling and maybe trying to save power */ - switch (priv->ps_mode) { - case IWL_MIMO_PS_STATIC: - case IWL_MIMO_PS_DYNAMIC: - *idle_state = (is_cam) ? 2 : 1; - break; - case IWL_MIMO_PS_NONE: - *idle_state = (is_cam) ? *rx_state : 1; - break; - default: - *idle_state = 1; - break; - } - - return 0; -} - -int iwl4965_hw_rxq_stop(struct iwl_priv *priv) -{ - int rc; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - - /* stop Rx DMA */ - iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - rc = iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG, - (1 << 24), 1000); - if (rc < 0) - IWL_ERROR("Can't stop Rx DMA.\n"); - - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -u8 iwl4965_hw_find_station(struct iwl_priv *priv, const u8 *addr) +static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv) { - int i; - int start = 0; - int ret = IWL_INVALID_STATION; + dma_addr_t pinst; + dma_addr_t pdata; unsigned long flags; - DECLARE_MAC_BUF(mac); - - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) || - (priv->iw_mode == IEEE80211_IF_TYPE_AP)) - start = IWL_STA_ID; - - if (is_broadcast_ether_addr(addr)) - return priv->hw_params.bcast_sta_id; - - spin_lock_irqsave(&priv->sta_lock, flags); - for (i = start; i < priv->hw_params.max_stations; i++) - if ((priv->stations[i].used) && - (!compare_ether_addr - (priv->stations[i].sta.sta.addr, addr))) { - ret = i; - goto out; - } - - IWL_DEBUG_ASSOC_LIMIT("can not find STA %s total %d\n", - print_mac(mac, addr), priv->num_stations); - - out: - spin_unlock_irqrestore(&priv->sta_lock, flags); - return ret; -} + int ret = 0; -static int iwl4965_nic_set_pwr_src(struct iwl_priv *priv, int pwr_max) -{ - int ret; - unsigned long flags; + /* bits 35:4 for 4965 */ + pinst = priv->ucode_code.p_addr >> 4; + pdata = priv->ucode_data_backup.p_addr >> 4; spin_lock_irqsave(&priv->lock, flags); ret = iwl_grab_nic_access(priv); @@ -535,340 +241,209 @@ static int iwl4965_nic_set_pwr_src(struct iwl_priv *priv, int pwr_max) return ret; } - if (!pwr_max) { - u32 val; - - ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, - &val); - - if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - } else - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); + /* Tell bootstrap uCode where to find image to load */ + iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); + iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); + iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, + priv->ucode_data.len); + /* Inst bytecount must be last to set up, bit 31 signals uCode + * that all new ptr/size info is in place */ + iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, + priv->ucode_code.len | BSM_DRAM_INST_LOAD); iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + IWL_DEBUG_INFO("Runtime uCode pointers are set.\n"); + return ret; } -static int iwl4965_rx_init(struct iwl_priv *priv, struct iwl4965_rx_queue *rxq) -{ - int ret; - unsigned long flags; - unsigned int rb_size; - - spin_lock_irqsave(&priv->lock, flags); - ret = iwl_grab_nic_access(priv); - if (ret) { - spin_unlock_irqrestore(&priv->lock, flags); - return ret; +/** + * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received + * + * Called after REPLY_ALIVE notification received from "initialize" uCode. + * + * The 4965 "initialize" ALIVE reply contains calibration data for: + * Voltage, temperature, and MIMO tx gain correction, now stored in priv + * (3945 does not contain this data). + * + * Tell "initialize" uCode to go ahead and load the runtime uCode. +*/ +static void iwl4965_init_alive_start(struct iwl_priv *priv) +{ + /* Check alive response for "valid" sign from uCode */ + if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { + /* We had an error bringing up the hardware, so take it + * all the way back down so we can try again */ + IWL_DEBUG_INFO("Initialize Alive failed.\n"); + goto restart; + } + + /* Bootstrap uCode has loaded initialize uCode ... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "initialize" alive if code weren't properly loaded. */ + if (iwl_verify_ucode(priv)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n"); + goto restart; + } + + /* Calculate temperature */ + priv->temperature = iwl4965_hw_get_temperature(priv); + + /* Send pointers to protocol/runtime uCode image ... init code will + * load and launch runtime uCode, which will send us another "Alive" + * notification. */ + IWL_DEBUG_INFO("Initialization Alive received.\n"); + if (iwl4965_set_ucode_ptrs(priv)) { + /* Runtime instruction load won't happen; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n"); + goto restart; } + return; - if (priv->cfg->mod_params->amsdu_size_8K) - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; - else - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; - - /* Stop Rx DMA */ - iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - - /* Reset driver's Rx queue write index */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); - - /* Tell device where to find RBD circular buffer in DRAM */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, - rxq->dma_addr >> 8); - - /* Tell device where in DRAM to update its Rx status */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, - (priv->shared_phys + - offsetof(struct iwl4965_shared, rb_closed)) >> 4); - - /* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */ - iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | - FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - rb_size | - /* 0x10 << 4 | */ - (RX_QUEUE_SIZE_LOG << - FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT)); - - /* - * iwl_write32(priv,CSR_INT_COAL_REG,0); - */ - - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -/* Tell 4965 where to find the "keep warm" buffer */ -static int iwl4965_kw_init(struct iwl_priv *priv) -{ - unsigned long flags; - int rc; - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl_grab_nic_access(priv); - if (rc) - goto out; - - iwl_write_direct32(priv, IWL_FH_KW_MEM_ADDR_REG, - priv->kw.dma_addr >> 4); - iwl_release_nic_access(priv); -out: - spin_unlock_irqrestore(&priv->lock, flags); - return rc; +restart: + queue_work(priv->workqueue, &priv->restart); } -static int iwl4965_kw_alloc(struct iwl_priv *priv) +static int is_fat_channel(__le32 rxon_flags) { - struct pci_dev *dev = priv->pci_dev; - struct iwl4965_kw *kw = &priv->kw; - - kw->size = IWL4965_KW_SIZE; /* TBW need set somewhere else */ - kw->v_addr = pci_alloc_consistent(dev, kw->size, &kw->dma_addr); - if (!kw->v_addr) - return -ENOMEM; - - return 0; + return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) || + (rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK); } -/** - * iwl4965_kw_free - Free the "keep warm" buffer +/* + * EEPROM handlers */ -static void iwl4965_kw_free(struct iwl_priv *priv) -{ - struct pci_dev *dev = priv->pci_dev; - struct iwl4965_kw *kw = &priv->kw; - if (kw->v_addr) { - pci_free_consistent(dev, kw->size, kw->v_addr, kw->dma_addr); - memset(kw, 0, sizeof(*kw)); - } -} - -/** - * iwl4965_txq_ctx_reset - Reset TX queue context - * Destroys all DMA structures and initialise them again - * - * @param priv - * @return error code - */ -static int iwl4965_txq_ctx_reset(struct iwl_priv *priv) +static int iwl4965_eeprom_check_version(struct iwl_priv *priv) { - int rc = 0; - int txq_id, slots_num; - unsigned long flags; - - iwl4965_kw_free(priv); + u16 eeprom_ver; + u16 calib_ver; - /* Free all tx/cmd queues and keep-warm buffer */ - iwl4965_hw_txq_ctx_free(priv); + eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION); - /* Alloc keep-warm buffer */ - rc = iwl4965_kw_alloc(priv); - if (rc) { - IWL_ERROR("Keep Warm allocation failed"); - goto error_kw; - } + calib_ver = iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET); - spin_lock_irqsave(&priv->lock, flags); - - rc = iwl_grab_nic_access(priv); - if (unlikely(rc)) { - IWL_ERROR("TX reset failed"); - spin_unlock_irqrestore(&priv->lock, flags); - goto error_reset; - } - - /* Turn off all Tx DMA channels */ - iwl_write_prph(priv, IWL49_SCD_TXFACT, 0); - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - /* Tell 4965 where to find the keep-warm buffer */ - rc = iwl4965_kw_init(priv); - if (rc) { - IWL_ERROR("kw_init failed\n"); - goto error_reset; - } - - /* Alloc and init all (default 16) Tx queues, - * including the command queue (#4) */ - for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { - slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? - TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; - rc = iwl4965_tx_queue_init(priv, &priv->txq[txq_id], slots_num, - txq_id); - if (rc) { - IWL_ERROR("Tx %d queue init failed\n", txq_id); - goto error; - } - } + if (eeprom_ver < EEPROM_4965_EEPROM_VERSION || + calib_ver < EEPROM_4965_TX_POWER_VERSION) + goto err; - return rc; + return 0; +err: + IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n", + eeprom_ver, EEPROM_4965_EEPROM_VERSION, + calib_ver, EEPROM_4965_TX_POWER_VERSION); + return -EINVAL; - error: - iwl4965_hw_txq_ctx_free(priv); - error_reset: - iwl4965_kw_free(priv); - error_kw: - return rc; } -int iwl4965_hw_nic_init(struct iwl_priv *priv) +/* + * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask + * must be called under priv->lock and mac access + */ +static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask) { - int rc; - unsigned long flags; - struct iwl4965_rx_queue *rxq = &priv->rxq; - u8 rev_id; - u32 val; - u8 val_link; + iwl_write_prph(priv, IWL49_SCD_TXFACT, mask); +} - iwl4965_power_init_handle(priv); +static int iwl4965_apm_init(struct iwl_priv *priv) +{ + int ret = 0; - /* nic_init */ - spin_lock_irqsave(&priv->lock, flags); + iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */ iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); + /* set "initialization complete" bit to move adapter + * D0U* --> D0A* state */ iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - rc = iwl_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (rc < 0) { - spin_unlock_irqrestore(&priv->lock, flags); - IWL_DEBUG_INFO("Failed to init the card\n"); - return rc; - } - rc = iwl_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; + /* wait for clock stabilization */ + ret = iwl_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (ret < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); + goto out; } - iwl_read_prph(priv, APMG_CLK_CTRL_REG); + ret = iwl_grab_nic_access(priv); + if (ret) + goto out; - iwl_write_prph(priv, APMG_CLK_CTRL_REG, - APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); - iwl_read_prph(priv, APMG_CLK_CTRL_REG); + /* enable DMA */ + iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT | + APMG_CLK_VAL_BSM_CLK_RQT); udelay(20); + /* disable L1-Active */ iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); + APMG_PCIDEV_STT_VAL_L1_ACT_DIS); iwl_release_nic_access(priv); - iwl_write32(priv, CSR_INT_COALESCING, 512 / 32); - spin_unlock_irqrestore(&priv->lock, flags); +out: + return ret; +} - /* Determine HW type */ - rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id); - if (rc) - return rc; - IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id); +static void iwl4965_nic_config(struct iwl_priv *priv) +{ + unsigned long flags; + u32 val; + u16 radio_cfg; + u16 link; - iwl4965_nic_set_pwr_src(priv, 1); spin_lock_irqsave(&priv->lock, flags); - if ((rev_id & 0x80) == 0x80 && (rev_id & 0x7f) < 8) { + if ((priv->rev_id & 0x80) == 0x80 && (priv->rev_id & 0x7f) < 8) { pci_read_config_dword(priv->pci_dev, PCI_REG_WUM8, &val); /* Enable No Snoop field */ pci_write_config_dword(priv->pci_dev, PCI_REG_WUM8, val & ~(1 << 11)); } - spin_unlock_irqrestore(&priv->lock, flags); - - if (priv->eeprom.calib_version < EEPROM_TX_POWER_VERSION_NEW) { - IWL_ERROR("Older EEPROM detected! Aborting.\n"); - return -EINVAL; - } + pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link); - pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); + /* L1 is enabled by BIOS */ + if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN) + /* diable L0S disabled L1A enabled */ + iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); + else + /* L0S enabled L1A disabled */ + iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); - /* disable L1 entry -- workaround for pre-B1 */ - pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02); + radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); - spin_lock_irqsave(&priv->lock, flags); + /* write radio config values to register */ + if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX) + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | + EEPROM_RF_CFG_STEP_MSK(radio_cfg) | + EEPROM_RF_CFG_DASH_MSK(radio_cfg)); /* set CSR_HW_CONFIG_REG for uCode use */ - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR49_HW_IF_CONFIG_REG_BIT_4965_R | - CSR49_HW_IF_CONFIG_REG_BIT_RADIO_SI | - CSR49_HW_IF_CONFIG_REG_BIT_MAC_SI); + CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | + CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); - rc = iwl_grab_nic_access(priv); - if (rc < 0) { - spin_unlock_irqrestore(&priv->lock, flags); - IWL_DEBUG_INFO("Failed to init the card\n"); - return rc; - } - - iwl_read_prph(priv, APMG_PS_CTRL_REG); - iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); - udelay(5); - iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); + priv->calib_info = (struct iwl_eeprom_calib_info *) + iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET); - iwl_release_nic_access(priv); spin_unlock_irqrestore(&priv->lock, flags); - - iwl4965_hw_card_show_info(priv); - - /* end nic_init */ - - /* Allocate the RX queue, or reset if it is already allocated */ - if (!rxq->bd) { - rc = iwl4965_rx_queue_alloc(priv); - if (rc) { - IWL_ERROR("Unable to initialize Rx queue\n"); - return -ENOMEM; - } - } else - iwl4965_rx_queue_reset(priv, rxq); - - iwl4965_rx_replenish(priv); - - iwl4965_rx_init(priv, rxq); - - spin_lock_irqsave(&priv->lock, flags); - - rxq->need_update = 1; - iwl4965_rx_queue_update_write_ptr(priv, rxq); - - spin_unlock_irqrestore(&priv->lock, flags); - - /* Allocate and init all Tx and Command queues */ - rc = iwl4965_txq_ctx_reset(priv); - if (rc) - return rc; - - if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) - IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n"); - - if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) - IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n"); - - set_bit(STATUS_INIT, &priv->status); - - return 0; } -int iwl4965_hw_nic_stop_master(struct iwl_priv *priv) +static int iwl4965_apm_stop_master(struct iwl_priv *priv) { - int rc = 0; - u32 reg_val; + int ret = 0; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); @@ -876,64 +451,41 @@ int iwl4965_hw_nic_stop_master(struct iwl_priv *priv) /* set stop master bit */ iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); - reg_val = iwl_read32(priv, CSR_GP_CNTRL); - - if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE == - (reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE)) - IWL_DEBUG_INFO("Card in power save, master is already " - "stopped\n"); - else { - rc = iwl_poll_bit(priv, CSR_RESET, + ret = iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED, CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); - if (rc < 0) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - } + if (ret < 0) + goto out; +out: spin_unlock_irqrestore(&priv->lock, flags); IWL_DEBUG_INFO("stop master\n"); - return rc; + return ret; } -/** - * iwl4965_hw_txq_ctx_stop - Stop all Tx DMA channels, free Tx queue memory - */ -void iwl4965_hw_txq_ctx_stop(struct iwl_priv *priv) +static void iwl4965_apm_stop(struct iwl_priv *priv) { - - int txq_id; unsigned long flags; - /* Stop each Tx DMA channel, and wait for it to be idle */ - for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { - spin_lock_irqsave(&priv->lock, flags); - if (iwl_grab_nic_access(priv)) { - spin_unlock_irqrestore(&priv->lock, flags); - continue; - } + iwl4965_apm_stop_master(priv); - iwl_write_direct32(priv, - IWL_FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), 0x0); - iwl_poll_direct_bit(priv, IWL_FH_TSSR_TX_STATUS_REG, - IWL_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE - (txq_id), 200); - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - } + spin_lock_irqsave(&priv->lock, flags); + + iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - /* Deallocate memory for all Tx queues */ - iwl4965_hw_txq_ctx_free(priv); + udelay(10); + /* clear "init complete" move adapter D0A* --> D0U state */ + iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + spin_unlock_irqrestore(&priv->lock, flags); } -int iwl4965_hw_nic_reset(struct iwl_priv *priv) +static int iwl4965_apm_reset(struct iwl_priv *priv) { - int rc = 0; + int ret = 0; unsigned long flags; - iwl4965_hw_nic_stop_master(priv); + iwl4965_apm_stop_master(priv); spin_lock_irqsave(&priv->lock, flags); @@ -941,509 +493,50 @@ int iwl4965_hw_nic_reset(struct iwl_priv *priv) udelay(10); + /* FIXME: put here L1A -L0S w/a */ + iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - rc = iwl_poll_bit(priv, CSR_RESET, + + ret = iwl_poll_bit(priv, CSR_RESET, CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25); + if (ret) + goto out; + udelay(10); - rc = iwl_grab_nic_access(priv); - if (!rc) { - iwl_write_prph(priv, APMG_CLK_EN_REG, - APMG_CLK_VAL_DMA_CLK_RQT | - APMG_CLK_VAL_BSM_CLK_RQT); + ret = iwl_grab_nic_access(priv); + if (ret) + goto out; + /* Enable DMA and BSM Clock */ + iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT | + APMG_CLK_VAL_BSM_CLK_RQT); - udelay(10); + udelay(10); - iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); + /* disable L1A */ + iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, + APMG_PCIDEV_STT_VAL_L1_ACT_DIS); - iwl_release_nic_access(priv); - } + iwl_release_nic_access(priv); clear_bit(STATUS_HCMD_ACTIVE, &priv->status); wake_up_interruptible(&priv->wait_command_queue); +out: spin_unlock_irqrestore(&priv->lock, flags); - return rc; - -} - -#define REG_RECALIB_PERIOD (60) - -/** - * iwl4965_bg_statistics_periodic - Timer callback to queue statistics - * - * This callback is provided in order to send a statistics request. - * - * This timer function is continually reset to execute within - * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION - * was received. We need to ensure we receive the statistics in order - * to update the temperature used for calibrating the TXPOWER. - */ -static void iwl4965_bg_statistics_periodic(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - iwl_send_statistics_request(priv, CMD_ASYNC); -} - -#define CT_LIMIT_CONST 259 -#define TM_CT_KILL_THRESHOLD 110 - -void iwl4965_rf_kill_ct_config(struct iwl_priv *priv) -{ - struct iwl4965_ct_kill_config cmd; - u32 R1, R2, R3; - u32 temp_th; - u32 crit_temperature; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&priv->lock, flags); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - spin_unlock_irqrestore(&priv->lock, flags); - - if (priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK) { - R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]); - R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]); - R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]); - } else { - R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]); - R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]); - R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]); - } - - temp_th = CELSIUS_TO_KELVIN(TM_CT_KILL_THRESHOLD); - - crit_temperature = ((temp_th * (R3-R1))/CT_LIMIT_CONST) + R2; - cmd.critical_temperature_R = cpu_to_le32(crit_temperature); - ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, - sizeof(cmd), &cmd); - if (ret) - IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded\n"); -} - -#ifdef CONFIG_IWL4965_SENSITIVITY - -/* "false alarms" are signals that our DSP tries to lock onto, - * but then determines that they are either noise, or transmissions - * from a distant wireless network (also "noise", really) that get - * "stepped on" by stronger transmissions within our own network. - * This algorithm attempts to set a sensitivity level that is high - * enough to receive all of our own network traffic, but not so - * high that our DSP gets too busy trying to lock onto non-network - * activity/noise. */ -static int iwl4965_sens_energy_cck(struct iwl_priv *priv, - u32 norm_fa, - u32 rx_enable_time, - struct statistics_general_data *rx_info) -{ - u32 max_nrg_cck = 0; - int i = 0; - u8 max_silence_rssi = 0; - u32 silence_ref = 0; - u8 silence_rssi_a = 0; - u8 silence_rssi_b = 0; - u8 silence_rssi_c = 0; - u32 val; - - /* "false_alarms" values below are cross-multiplications to assess the - * numbers of false alarms within the measured period of actual Rx - * (Rx is off when we're txing), vs the min/max expected false alarms - * (some should be expected if rx is sensitive enough) in a - * hypothetical listening period of 200 time units (TU), 204.8 msec: - * - * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time - * - * */ - u32 false_alarms = norm_fa * 200 * 1024; - u32 max_false_alarms = MAX_FA_CCK * rx_enable_time; - u32 min_false_alarms = MIN_FA_CCK * rx_enable_time; - struct iwl4965_sensitivity_data *data = NULL; - - data = &(priv->sensitivity_data); - - data->nrg_auto_corr_silence_diff = 0; - - /* Find max silence rssi among all 3 receivers. - * This is background noise, which may include transmissions from other - * networks, measured during silence before our network's beacon */ - silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a & - ALL_BAND_FILTER) >> 8); - silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b & - ALL_BAND_FILTER) >> 8); - silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c & - ALL_BAND_FILTER) >> 8); - - val = max(silence_rssi_b, silence_rssi_c); - max_silence_rssi = max(silence_rssi_a, (u8) val); - - /* Store silence rssi in 20-beacon history table */ - data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi; - data->nrg_silence_idx++; - if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L) - data->nrg_silence_idx = 0; - - /* Find max silence rssi across 20 beacon history */ - for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) { - val = data->nrg_silence_rssi[i]; - silence_ref = max(silence_ref, val); - } - IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n", - silence_rssi_a, silence_rssi_b, silence_rssi_c, - silence_ref); - - /* Find max rx energy (min value!) among all 3 receivers, - * measured during beacon frame. - * Save it in 10-beacon history table. */ - i = data->nrg_energy_idx; - val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c); - data->nrg_value[i] = min(rx_info->beacon_energy_a, val); - - data->nrg_energy_idx++; - if (data->nrg_energy_idx >= 10) - data->nrg_energy_idx = 0; - - /* Find min rx energy (max value) across 10 beacon history. - * This is the minimum signal level that we want to receive well. - * Add backoff (margin so we don't miss slightly lower energy frames). - * This establishes an upper bound (min value) for energy threshold. */ - max_nrg_cck = data->nrg_value[0]; - for (i = 1; i < 10; i++) - max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i])); - max_nrg_cck += 6; - - IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n", - rx_info->beacon_energy_a, rx_info->beacon_energy_b, - rx_info->beacon_energy_c, max_nrg_cck - 6); - - /* Count number of consecutive beacons with fewer-than-desired - * false alarms. */ - if (false_alarms < min_false_alarms) - data->num_in_cck_no_fa++; - else - data->num_in_cck_no_fa = 0; - IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n", - data->num_in_cck_no_fa); - - /* If we got too many false alarms this time, reduce sensitivity */ - if (false_alarms > max_false_alarms) { - IWL_DEBUG_CALIB("norm FA %u > max FA %u\n", - false_alarms, max_false_alarms); - IWL_DEBUG_CALIB("... reducing sensitivity\n"); - data->nrg_curr_state = IWL_FA_TOO_MANY; - - if (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK) { - /* Store for "fewer than desired" on later beacon */ - data->nrg_silence_ref = silence_ref; - - /* increase energy threshold (reduce nrg value) - * to decrease sensitivity */ - if (data->nrg_th_cck > (NRG_MAX_CCK + NRG_STEP_CCK)) - data->nrg_th_cck = data->nrg_th_cck - - NRG_STEP_CCK; - } - - /* increase auto_corr values to decrease sensitivity */ - if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK) - data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1; - else { - val = data->auto_corr_cck + AUTO_CORR_STEP_CCK; - data->auto_corr_cck = min((u32)AUTO_CORR_MAX_CCK, val); - } - val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK; - data->auto_corr_cck_mrc = min((u32)AUTO_CORR_MAX_CCK_MRC, val); - - /* Else if we got fewer than desired, increase sensitivity */ - } else if (false_alarms < min_false_alarms) { - data->nrg_curr_state = IWL_FA_TOO_FEW; - - /* Compare silence level with silence level for most recent - * healthy number or too many false alarms */ - data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref - - (s32)silence_ref; - - IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n", - false_alarms, min_false_alarms, - data->nrg_auto_corr_silence_diff); - - /* Increase value to increase sensitivity, but only if: - * 1a) previous beacon did *not* have *too many* false alarms - * 1b) AND there's a significant difference in Rx levels - * from a previous beacon with too many, or healthy # FAs - * OR 2) We've seen a lot of beacons (100) with too few - * false alarms */ - if ((data->nrg_prev_state != IWL_FA_TOO_MANY) && - ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || - (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { - - IWL_DEBUG_CALIB("... increasing sensitivity\n"); - /* Increase nrg value to increase sensitivity */ - val = data->nrg_th_cck + NRG_STEP_CCK; - data->nrg_th_cck = min((u32)NRG_MIN_CCK, val); - - /* Decrease auto_corr values to increase sensitivity */ - val = data->auto_corr_cck - AUTO_CORR_STEP_CCK; - data->auto_corr_cck = max((u32)AUTO_CORR_MIN_CCK, val); - - val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK; - data->auto_corr_cck_mrc = - max((u32)AUTO_CORR_MIN_CCK_MRC, val); - - } else - IWL_DEBUG_CALIB("... but not changing sensitivity\n"); - - /* Else we got a healthy number of false alarms, keep status quo */ - } else { - IWL_DEBUG_CALIB(" FA in safe zone\n"); - data->nrg_curr_state = IWL_FA_GOOD_RANGE; - - /* Store for use in "fewer than desired" with later beacon */ - data->nrg_silence_ref = silence_ref; - - /* If previous beacon had too many false alarms, - * give it some extra margin by reducing sensitivity again - * (but don't go below measured energy of desired Rx) */ - if (IWL_FA_TOO_MANY == data->nrg_prev_state) { - IWL_DEBUG_CALIB("... increasing margin\n"); - data->nrg_th_cck -= NRG_MARGIN; - } - } - - /* Make sure the energy threshold does not go above the measured - * energy of the desired Rx signals (reduced by backoff margin), - * or else we might start missing Rx frames. - * Lower value is higher energy, so we use max()! - */ - data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck); - IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck); - - data->nrg_prev_state = data->nrg_curr_state; - - return 0; -} - - -static int iwl4965_sens_auto_corr_ofdm(struct iwl_priv *priv, - u32 norm_fa, - u32 rx_enable_time) -{ - u32 val; - u32 false_alarms = norm_fa * 200 * 1024; - u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time; - u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time; - struct iwl4965_sensitivity_data *data = NULL; - - data = &(priv->sensitivity_data); - - /* If we got too many false alarms this time, reduce sensitivity */ - if (false_alarms > max_false_alarms) { - - IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n", - false_alarms, max_false_alarms); - - val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm = - min((u32)AUTO_CORR_MAX_OFDM, val); - - val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc = - min((u32)AUTO_CORR_MAX_OFDM_MRC, val); - - val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_x1 = - min((u32)AUTO_CORR_MAX_OFDM_X1, val); - - val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc_x1 = - min((u32)AUTO_CORR_MAX_OFDM_MRC_X1, val); - } - - /* Else if we got fewer than desired, increase sensitivity */ - else if (false_alarms < min_false_alarms) { - - IWL_DEBUG_CALIB("norm FA %u < min FA %u\n", - false_alarms, min_false_alarms); - - val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm = - max((u32)AUTO_CORR_MIN_OFDM, val); - - val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc = - max((u32)AUTO_CORR_MIN_OFDM_MRC, val); - - val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_x1 = - max((u32)AUTO_CORR_MIN_OFDM_X1, val); - - val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc_x1 = - max((u32)AUTO_CORR_MIN_OFDM_MRC_X1, val); - } - - else - IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n", - min_false_alarms, false_alarms, max_false_alarms); - - return 0; -} - -static int iwl4965_sensitivity_callback(struct iwl_priv *priv, - struct iwl_cmd *cmd, struct sk_buff *skb) -{ - /* We didn't cache the SKB; let the caller free it */ - return 1; -} - -/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */ -static int iwl4965_sensitivity_write(struct iwl_priv *priv, u8 flags) -{ - struct iwl4965_sensitivity_cmd cmd ; - struct iwl4965_sensitivity_data *data = NULL; - struct iwl_host_cmd cmd_out = { - .id = SENSITIVITY_CMD, - .len = sizeof(struct iwl4965_sensitivity_cmd), - .meta.flags = flags, - .data = &cmd, - }; - int ret; - - data = &(priv->sensitivity_data); - - memset(&cmd, 0, sizeof(cmd)); - - cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm); - cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm_mrc); - cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm_x1); - cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1); - - cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] = - cpu_to_le16((u16)data->auto_corr_cck); - cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16((u16)data->auto_corr_cck_mrc); - - cmd.table[HD_MIN_ENERGY_CCK_DET_INDEX] = - cpu_to_le16((u16)data->nrg_th_cck); - cmd.table[HD_MIN_ENERGY_OFDM_DET_INDEX] = - cpu_to_le16((u16)data->nrg_th_ofdm); - - cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] = - __constant_cpu_to_le16(190); - cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] = - __constant_cpu_to_le16(390); - cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] = - __constant_cpu_to_le16(62); - - IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n", - data->auto_corr_ofdm, data->auto_corr_ofdm_mrc, - data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1, - data->nrg_th_ofdm); - - IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n", - data->auto_corr_cck, data->auto_corr_cck_mrc, - data->nrg_th_cck); - - /* Update uCode's "work" table, and copy it to DSP */ - cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE; - - if (flags & CMD_ASYNC) - cmd_out.meta.u.callback = iwl4965_sensitivity_callback; - - /* Don't send command to uCode if nothing has changed */ - if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]), - sizeof(u16)*HD_TABLE_SIZE)) { - IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n"); - return 0; - } - - /* Copy table for comparison next time */ - memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]), - sizeof(u16)*HD_TABLE_SIZE); - - ret = iwl_send_cmd(priv, &cmd_out); - if (ret) - IWL_ERROR("SENSITIVITY_CMD failed\n"); - return ret; } -void iwl4965_init_sensitivity(struct iwl_priv *priv, u8 flags, u8 force) -{ - struct iwl4965_sensitivity_data *data = NULL; - int i; - int ret = 0; - - IWL_DEBUG_CALIB("Start iwl4965_init_sensitivity\n"); - - if (force) - memset(&(priv->sensitivity_tbl[0]), 0, - sizeof(u16)*HD_TABLE_SIZE); - - /* Clear driver's sensitivity algo data */ - data = &(priv->sensitivity_data); - memset(data, 0, sizeof(struct iwl4965_sensitivity_data)); - - data->num_in_cck_no_fa = 0; - data->nrg_curr_state = IWL_FA_TOO_MANY; - data->nrg_prev_state = IWL_FA_TOO_MANY; - data->nrg_silence_ref = 0; - data->nrg_silence_idx = 0; - data->nrg_energy_idx = 0; - - for (i = 0; i < 10; i++) - data->nrg_value[i] = 0; - - for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) - data->nrg_silence_rssi[i] = 0; - - data->auto_corr_ofdm = 90; - data->auto_corr_ofdm_mrc = 170; - data->auto_corr_ofdm_x1 = 105; - data->auto_corr_ofdm_mrc_x1 = 220; - data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF; - data->auto_corr_cck_mrc = 200; - data->nrg_th_cck = 100; - data->nrg_th_ofdm = 100; - - data->last_bad_plcp_cnt_ofdm = 0; - data->last_fa_cnt_ofdm = 0; - data->last_bad_plcp_cnt_cck = 0; - data->last_fa_cnt_cck = 0; - - /* Clear prior Sensitivity command data to force send to uCode */ - if (force) - memset(&(priv->sensitivity_tbl[0]), 0, - sizeof(u16)*HD_TABLE_SIZE); - - ret |= iwl4965_sensitivity_write(priv, flags); - IWL_DEBUG_CALIB("<<return 0x%X\n", ret); - - return; -} - - /* Reset differential Rx gains in NIC to prepare for chain noise calibration. * Called after every association, but this runs only once! * ... once chain noise is calibrated the first time, it's good forever. */ -void iwl4965_chain_noise_reset(struct iwl_priv *priv) +static void iwl4965_chain_noise_reset(struct iwl_priv *priv) { - struct iwl4965_chain_noise_data *data = NULL; + struct iwl_chain_noise_data *data = &(priv->chain_noise_data); - data = &(priv->chain_noise_data); if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) { struct iwl4965_calibration_cmd cmd; @@ -1452,387 +545,89 @@ void iwl4965_chain_noise_reset(struct iwl_priv *priv) cmd.diff_gain_a = 0; cmd.diff_gain_b = 0; cmd.diff_gain_c = 0; - iwl_send_cmd_pdu_async(priv, REPLY_PHY_CALIBRATION_CMD, - sizeof(cmd), &cmd, NULL); - msleep(4); + if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cmd), &cmd)) + IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n"); data->state = IWL_CHAIN_NOISE_ACCUMULATE; IWL_DEBUG_CALIB("Run chain_noise_calibrate\n"); } - return; } -/* - * Accumulate 20 beacons of signal and noise statistics for each of - * 3 receivers/antennas/rx-chains, then figure out: - * 1) Which antennas are connected. - * 2) Differential rx gain settings to balance the 3 receivers. - */ -static void iwl4965_noise_calibration(struct iwl_priv *priv, - struct iwl4965_notif_statistics *stat_resp) +static void iwl4965_gain_computation(struct iwl_priv *priv, + u32 *average_noise, + u16 min_average_noise_antenna_i, + u32 min_average_noise) { - struct iwl4965_chain_noise_data *data = NULL; - int ret = 0; - - u32 chain_noise_a; - u32 chain_noise_b; - u32 chain_noise_c; - u32 chain_sig_a; - u32 chain_sig_b; - u32 chain_sig_c; - u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; - u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; - u32 max_average_sig; - u16 max_average_sig_antenna_i; - u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE; - u16 min_average_noise_antenna_i = INITIALIZATION_VALUE; - u16 i = 0; - u16 chan_num = INITIALIZATION_VALUE; - u32 band = INITIALIZATION_VALUE; - u32 active_chains = 0; - unsigned long flags; - struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general); - - data = &(priv->chain_noise_data); - - /* Accumulate just the first 20 beacons after the first association, - * then we're done forever. */ - if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) { - if (data->state == IWL_CHAIN_NOISE_ALIVE) - IWL_DEBUG_CALIB("Wait for noise calib reset\n"); - return; - } - - spin_lock_irqsave(&priv->lock, flags); - if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { - IWL_DEBUG_CALIB(" << Interference data unavailable\n"); - spin_unlock_irqrestore(&priv->lock, flags); - return; - } - - band = (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) ? 0 : 1; - chan_num = le16_to_cpu(priv->staging_rxon.channel); - - /* Make sure we accumulate data for just the associated channel - * (even if scanning). */ - if ((chan_num != (le32_to_cpu(stat_resp->flag) >> 16)) || - ((STATISTICS_REPLY_FLG_BAND_24G_MSK == - (stat_resp->flag & STATISTICS_REPLY_FLG_BAND_24G_MSK)) && band)) { - IWL_DEBUG_CALIB("Stats not from chan=%d, band=%d\n", - chan_num, band); - spin_unlock_irqrestore(&priv->lock, flags); - return; - } - - /* Accumulate beacon statistics values across 20 beacons */ - chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) & - IN_BAND_FILTER; - chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) & - IN_BAND_FILTER; - chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) & - IN_BAND_FILTER; - - chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER; - chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER; - chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER; + int i, ret; + struct iwl_chain_noise_data *data = &priv->chain_noise_data; - spin_unlock_irqrestore(&priv->lock, flags); + data->delta_gain_code[min_average_noise_antenna_i] = 0; - data->beacon_count++; - - data->chain_noise_a = (chain_noise_a + data->chain_noise_a); - data->chain_noise_b = (chain_noise_b + data->chain_noise_b); - data->chain_noise_c = (chain_noise_c + data->chain_noise_c); - - data->chain_signal_a = (chain_sig_a + data->chain_signal_a); - data->chain_signal_b = (chain_sig_b + data->chain_signal_b); - data->chain_signal_c = (chain_sig_c + data->chain_signal_c); - - IWL_DEBUG_CALIB("chan=%d, band=%d, beacon=%d\n", chan_num, band, - data->beacon_count); - IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n", - chain_sig_a, chain_sig_b, chain_sig_c); - IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n", - chain_noise_a, chain_noise_b, chain_noise_c); - - /* If this is the 20th beacon, determine: - * 1) Disconnected antennas (using signal strengths) - * 2) Differential gain (using silence noise) to balance receivers */ - if (data->beacon_count == CAL_NUM_OF_BEACONS) { - - /* Analyze signal for disconnected antenna */ - average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS; - average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS; - average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS; - - if (average_sig[0] >= average_sig[1]) { - max_average_sig = average_sig[0]; - max_average_sig_antenna_i = 0; - active_chains = (1 << max_average_sig_antenna_i); - } else { - max_average_sig = average_sig[1]; - max_average_sig_antenna_i = 1; - active_chains = (1 << max_average_sig_antenna_i); - } - - if (average_sig[2] >= max_average_sig) { - max_average_sig = average_sig[2]; - max_average_sig_antenna_i = 2; - active_chains = (1 << max_average_sig_antenna_i); - } - - IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n", - average_sig[0], average_sig[1], average_sig[2]); - IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n", - max_average_sig, max_average_sig_antenna_i); - - /* Compare signal strengths for all 3 receivers. */ - for (i = 0; i < NUM_RX_CHAINS; i++) { - if (i != max_average_sig_antenna_i) { - s32 rssi_delta = (max_average_sig - - average_sig[i]); - - /* If signal is very weak, compared with - * strongest, mark it as disconnected. */ - if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS) - data->disconn_array[i] = 1; - else - active_chains |= (1 << i); - IWL_DEBUG_CALIB("i = %d rssiDelta = %d " - "disconn_array[i] = %d\n", - i, rssi_delta, data->disconn_array[i]); - } - } - - /*If both chains A & B are disconnected - - * connect B and leave A as is */ - if (data->disconn_array[CHAIN_A] && - data->disconn_array[CHAIN_B]) { - data->disconn_array[CHAIN_B] = 0; - active_chains |= (1 << CHAIN_B); - IWL_DEBUG_CALIB("both A & B chains are disconnected! " - "W/A - declare B as connected\n"); - } - - IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n", - active_chains); - - /* Save for use within RXON, TX, SCAN commands, etc. */ - priv->valid_antenna = active_chains; - - /* Analyze noise for rx balance */ - average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS); - average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS); - average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS); - - for (i = 0; i < NUM_RX_CHAINS; i++) { - if (!(data->disconn_array[i]) && - (average_noise[i] <= min_average_noise)) { - /* This means that chain i is active and has - * lower noise values so far: */ - min_average_noise = average_noise[i]; - min_average_noise_antenna_i = i; - } - } + for (i = 0; i < NUM_RX_CHAINS; i++) { + s32 delta_g = 0; - data->delta_gain_code[min_average_noise_antenna_i] = 0; - - IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n", - average_noise[0], average_noise[1], - average_noise[2]); - - IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n", - min_average_noise, min_average_noise_antenna_i); - - for (i = 0; i < NUM_RX_CHAINS; i++) { - s32 delta_g = 0; - - if (!(data->disconn_array[i]) && - (data->delta_gain_code[i] == + if (!(data->disconn_array[i]) && + (data->delta_gain_code[i] == CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) { - delta_g = average_noise[i] - min_average_noise; - data->delta_gain_code[i] = (u8)((delta_g * - 10) / 15); - if (CHAIN_NOISE_MAX_DELTA_GAIN_CODE < - data->delta_gain_code[i]) - data->delta_gain_code[i] = - CHAIN_NOISE_MAX_DELTA_GAIN_CODE; - - data->delta_gain_code[i] = - (data->delta_gain_code[i] | (1 << 2)); - } else - data->delta_gain_code[i] = 0; - } - IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n", - data->delta_gain_code[0], - data->delta_gain_code[1], - data->delta_gain_code[2]); - - /* Differential gain gets sent to uCode only once */ - if (!data->radio_write) { - struct iwl4965_calibration_cmd cmd; - data->radio_write = 1; - - memset(&cmd, 0, sizeof(cmd)); - cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD; - cmd.diff_gain_a = data->delta_gain_code[0]; - cmd.diff_gain_b = data->delta_gain_code[1]; - cmd.diff_gain_c = data->delta_gain_code[2]; - ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, - sizeof(cmd), &cmd); - if (ret) - IWL_DEBUG_CALIB("fail sending cmd " - "REPLY_PHY_CALIBRATION_CMD \n"); - - /* TODO we might want recalculate - * rx_chain in rxon cmd */ - - /* Mark so we run this algo only once! */ - data->state = IWL_CHAIN_NOISE_CALIBRATED; + delta_g = average_noise[i] - min_average_noise; + data->delta_gain_code[i] = (u8)((delta_g * 10) / 15); + data->delta_gain_code[i] = + min(data->delta_gain_code[i], + (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE); + + data->delta_gain_code[i] = + (data->delta_gain_code[i] | (1 << 2)); + } else { + data->delta_gain_code[i] = 0; } - data->chain_noise_a = 0; - data->chain_noise_b = 0; - data->chain_noise_c = 0; - data->chain_signal_a = 0; - data->chain_signal_b = 0; - data->chain_signal_c = 0; - data->beacon_count = 0; - } - return; -} - -static void iwl4965_sensitivity_calibration(struct iwl_priv *priv, - struct iwl4965_notif_statistics *resp) -{ - u32 rx_enable_time; - u32 fa_cck; - u32 fa_ofdm; - u32 bad_plcp_cck; - u32 bad_plcp_ofdm; - u32 norm_fa_ofdm; - u32 norm_fa_cck; - struct iwl4965_sensitivity_data *data = NULL; - struct statistics_rx_non_phy *rx_info = &(resp->rx.general); - struct statistics_rx *statistics = &(resp->rx); - unsigned long flags; - struct statistics_general_data statis; - int ret; - - data = &(priv->sensitivity_data); - - if (!iwl_is_associated(priv)) { - IWL_DEBUG_CALIB("<< - not associated\n"); - return; - } - - spin_lock_irqsave(&priv->lock, flags); - if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { - IWL_DEBUG_CALIB("<< invalid data.\n"); - spin_unlock_irqrestore(&priv->lock, flags); - return; } + IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n", + data->delta_gain_code[0], + data->delta_gain_code[1], + data->delta_gain_code[2]); - /* Extract Statistics: */ - rx_enable_time = le32_to_cpu(rx_info->channel_load); - fa_cck = le32_to_cpu(statistics->cck.false_alarm_cnt); - fa_ofdm = le32_to_cpu(statistics->ofdm.false_alarm_cnt); - bad_plcp_cck = le32_to_cpu(statistics->cck.plcp_err); - bad_plcp_ofdm = le32_to_cpu(statistics->ofdm.plcp_err); - - statis.beacon_silence_rssi_a = - le32_to_cpu(statistics->general.beacon_silence_rssi_a); - statis.beacon_silence_rssi_b = - le32_to_cpu(statistics->general.beacon_silence_rssi_b); - statis.beacon_silence_rssi_c = - le32_to_cpu(statistics->general.beacon_silence_rssi_c); - statis.beacon_energy_a = - le32_to_cpu(statistics->general.beacon_energy_a); - statis.beacon_energy_b = - le32_to_cpu(statistics->general.beacon_energy_b); - statis.beacon_energy_c = - le32_to_cpu(statistics->general.beacon_energy_c); - - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time); - - if (!rx_enable_time) { - IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n"); - return; - } - - /* These statistics increase monotonically, and do not reset - * at each beacon. Calculate difference from last value, or just - * use the new statistics value if it has reset or wrapped around. */ - if (data->last_bad_plcp_cnt_cck > bad_plcp_cck) - data->last_bad_plcp_cnt_cck = bad_plcp_cck; - else { - bad_plcp_cck -= data->last_bad_plcp_cnt_cck; - data->last_bad_plcp_cnt_cck += bad_plcp_cck; - } + /* Differential gain gets sent to uCode only once */ + if (!data->radio_write) { + struct iwl4965_calibration_cmd cmd; + data->radio_write = 1; - if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm) - data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm; - else { - bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm; - data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm; - } + memset(&cmd, 0, sizeof(cmd)); + cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD; + cmd.diff_gain_a = data->delta_gain_code[0]; + cmd.diff_gain_b = data->delta_gain_code[1]; + cmd.diff_gain_c = data->delta_gain_code[2]; + ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cmd), &cmd); + if (ret) + IWL_DEBUG_CALIB("fail sending cmd " + "REPLY_PHY_CALIBRATION_CMD \n"); - if (data->last_fa_cnt_ofdm > fa_ofdm) - data->last_fa_cnt_ofdm = fa_ofdm; - else { - fa_ofdm -= data->last_fa_cnt_ofdm; - data->last_fa_cnt_ofdm += fa_ofdm; - } + /* TODO we might want recalculate + * rx_chain in rxon cmd */ - if (data->last_fa_cnt_cck > fa_cck) - data->last_fa_cnt_cck = fa_cck; - else { - fa_cck -= data->last_fa_cnt_cck; - data->last_fa_cnt_cck += fa_cck; + /* Mark so we run this algo only once! */ + data->state = IWL_CHAIN_NOISE_CALIBRATED; } - - /* Total aborted signal locks */ - norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm; - norm_fa_cck = fa_cck + bad_plcp_cck; - - IWL_DEBUG_CALIB("cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck, - bad_plcp_cck, fa_ofdm, bad_plcp_ofdm); - - iwl4965_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time); - iwl4965_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis); - ret = iwl4965_sensitivity_write(priv, CMD_ASYNC); - - return; + data->chain_noise_a = 0; + data->chain_noise_b = 0; + data->chain_noise_c = 0; + data->chain_signal_a = 0; + data->chain_signal_b = 0; + data->chain_signal_c = 0; + data->beacon_count = 0; } -static void iwl4965_bg_sensitivity_work(void *p) +static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_control *ctrl, + __le32 *tx_flags) { - struct iwl_priv *priv = p; - - mutex_lock(&priv->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) { - mutex_unlock(&priv->mutex); - return; + if (ctrl->flags & IEEE80211_TXCTL_USE_RTS_CTS) { + *tx_flags |= TX_CMD_FLG_RTS_MSK; + *tx_flags &= ~TX_CMD_FLG_CTS_MSK; + } else if (ctrl->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) { + *tx_flags &= ~TX_CMD_FLG_RTS_MSK; + *tx_flags |= TX_CMD_FLG_CTS_MSK; } - - if (priv->start_calib) { - iwl4965_noise_calibration(priv, &priv->statistics); - - if (priv->sensitivity_data.state == - IWL_SENS_CALIB_NEED_REINIT) { - iwl4965_init_sensitivity(priv, CMD_ASYNC, 0); - priv->sensitivity_data.state = IWL_SENS_CALIB_ALLOWED; - } else - iwl4965_sensitivity_calibration(priv, - &priv->statistics); - } - - mutex_unlock(&priv->mutex); - return; } -#endif /*CONFIG_IWL4965_SENSITIVITY*/ static void iwl4965_bg_txpower_work(void *p) { @@ -1851,7 +646,7 @@ static void iwl4965_bg_txpower_work(void *p) /* Regardless of if we are assocaited, we must reconfigure the * TX power since frames can be sent on non-radar channels while * not associated */ - iwl4965_hw_reg_send_txpower(priv); + iwl4965_send_tx_power(priv); /* Update last_temperature to keep is_calib_needed from running * when it isn't needed... */ @@ -1878,7 +673,7 @@ static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index) * NOTE: Acquire priv->lock before calling this function ! */ static void iwl4965_tx_queue_set_status(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq, + struct iwl_tx_queue *txq, int tx_fifo_id, int scd_retry) { int txq_id = txq->q.id; @@ -1888,11 +683,11 @@ static void iwl4965_tx_queue_set_status(struct iwl_priv *priv, /* Set up and activate */ iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), - (active << SCD_QUEUE_STTS_REG_POS_ACTIVE) | - (tx_fifo_id << SCD_QUEUE_STTS_REG_POS_TXF) | - (scd_retry << SCD_QUEUE_STTS_REG_POS_WSL) | - (scd_retry << SCD_QUEUE_STTS_REG_POS_SCD_ACK) | - SCD_QUEUE_STTS_REG_MSK); + (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | + (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) | + (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) | + (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | + IWL49_SCD_QUEUE_STTS_REG_MSK); txq->sched_retry = scd_retry; @@ -1906,22 +701,12 @@ static const u16 default_queue_to_tx_fifo[] = { IWL_TX_FIFO_AC2, IWL_TX_FIFO_AC1, IWL_TX_FIFO_AC0, - IWL_CMD_FIFO_NUM, + IWL49_CMD_FIFO_NUM, IWL_TX_FIFO_HCCA_1, IWL_TX_FIFO_HCCA_2 }; -static inline void iwl4965_txq_ctx_activate(struct iwl_priv *priv, int txq_id) -{ - set_bit(txq_id, &priv->txq_ctx_active_msk); -} - -static inline void iwl4965_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id) -{ - clear_bit(txq_id, &priv->txq_ctx_active_msk); -} - -int iwl4965_alive_notify(struct iwl_priv *priv) +static int iwl4965_alive_notify(struct iwl_priv *priv) { u32 a; int i = 0; @@ -1930,15 +715,6 @@ int iwl4965_alive_notify(struct iwl_priv *priv) spin_lock_irqsave(&priv->lock, flags); -#ifdef CONFIG_IWL4965_SENSITIVITY - memset(&(priv->sensitivity_data), 0, - sizeof(struct iwl4965_sensitivity_data)); - memset(&(priv->chain_noise_data), 0, - sizeof(struct iwl4965_chain_noise_data)); - for (i = 0; i < NUM_RX_CHAINS; i++) - priv->chain_noise_data.delta_gain_code[i] = - CHAIN_NOISE_DELTA_GAIN_INIT_VAL; -#endif /* CONFIG_IWL4965_SENSITIVITY*/ ret = iwl_grab_nic_access(priv); if (ret) { spin_unlock_irqrestore(&priv->lock, flags); @@ -1947,10 +723,10 @@ int iwl4965_alive_notify(struct iwl_priv *priv) /* Clear 4965's internal Tx Scheduler data base */ priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR); - a = priv->scd_base_addr + SCD_CONTEXT_DATA_OFFSET; - for (; a < priv->scd_base_addr + SCD_TX_STTS_BITMAP_OFFSET; a += 4) + a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET; + for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) iwl_write_targ_mem(priv, a, 0); - for (; a < priv->scd_base_addr + SCD_TRANSLATE_TBL_OFFSET; a += 4) + for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) iwl_write_targ_mem(priv, a, 0); for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4) iwl_write_targ_mem(priv, a, 0); @@ -1972,162 +748,99 @@ int iwl4965_alive_notify(struct iwl_priv *priv) /* Max Tx Window size for Scheduler-ACK mode */ iwl_write_targ_mem(priv, priv->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(i), - (SCD_WIN_SIZE << - SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & - SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); + IWL49_SCD_CONTEXT_QUEUE_OFFSET(i), + (SCD_WIN_SIZE << + IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & + IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); /* Frame limit */ iwl_write_targ_mem(priv, priv->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(i) + - sizeof(u32), - (SCD_FRAME_LIMIT << - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); + IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) + + sizeof(u32), + (SCD_FRAME_LIMIT << + IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & + IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); } iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << priv->hw_params.max_txq_num) - 1); /* Activate all Tx DMA/FIFO channels */ - iwl_write_prph(priv, IWL49_SCD_TXFACT, - SCD_TXFACT_REG_TXFIFO_MASK(0, 7)); + priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 7)); iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0); /* Map each Tx/cmd queue to its corresponding fifo */ for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { int ac = default_queue_to_tx_fifo[i]; - iwl4965_txq_ctx_activate(priv, i); + iwl_txq_ctx_activate(priv, i); iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0); } iwl_release_nic_access(priv); spin_unlock_irqrestore(&priv->lock, flags); - /* Ask for statistics now, the uCode will send statistics notification - * periodically after association */ - iwl_send_statistics_request(priv, CMD_ASYNC); return ret; } +static struct iwl_sensitivity_ranges iwl4965_sensitivity = { + .min_nrg_cck = 97, + .max_nrg_cck = 0, + + .auto_corr_min_ofdm = 85, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 105, + .auto_corr_min_ofdm_mrc_x1 = 220, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + .auto_corr_max_ofdm_x1 = 140, + .auto_corr_max_ofdm_mrc_x1 = 270, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 200, + .auto_corr_max_cck_mrc = 400, + + .nrg_th_cck = 100, + .nrg_th_ofdm = 100, +}; + /** * iwl4965_hw_set_hw_params * * Called when initializing driver */ -int iwl4965_hw_set_hw_params(struct iwl_priv *priv) +static int iwl4965_hw_set_hw_params(struct iwl_priv *priv) { - if ((priv->cfg->mod_params->num_of_queues > IWL4965_MAX_NUM_QUEUES) || + if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) || (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) { IWL_ERROR("invalid queues_num, should be between %d and %d\n", - IWL_MIN_NUM_QUEUES, IWL4965_MAX_NUM_QUEUES); + IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES); return -EINVAL; } priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues; - priv->hw_params.tx_cmd_len = sizeof(struct iwl4965_tx_cmd); - priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; - priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; - if (priv->cfg->mod_params->amsdu_size_8K) - priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K; - else - priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K; - priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256; + priv->hw_params.first_ampdu_q = IWL49_FIRST_AMPDU_QUEUE; priv->hw_params.max_stations = IWL4965_STATION_COUNT; priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID; + priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE; + priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE; + priv->hw_params.max_bsm_size = BSM_SRAM_SIZE; + priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ); priv->hw_params.tx_chains_num = 2; priv->hw_params.rx_chains_num = 2; - priv->hw_params.valid_tx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX); - priv->hw_params.valid_rx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX); - - return 0; -} - -/** - * iwl4965_hw_txq_ctx_free - Free TXQ Context - * - * Destroy all TX DMA queues and structures - */ -void iwl4965_hw_txq_ctx_free(struct iwl_priv *priv) -{ - int txq_id; - - /* Tx queues */ - for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) - iwl4965_tx_queue_free(priv, &priv->txq[txq_id]); - - /* Keep-warm buffer */ - iwl4965_kw_free(priv); -} - -/** - * iwl4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] - * - * Does NOT advance any TFD circular buffer read/write indexes - * Does NOT free the TFD itself (which is within circular buffer) - */ -int iwl4965_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl4965_tx_queue *txq) -{ - struct iwl4965_tfd_frame *bd_tmp = (struct iwl4965_tfd_frame *)&txq->bd[0]; - struct iwl4965_tfd_frame *bd = &bd_tmp[txq->q.read_ptr]; - struct pci_dev *dev = priv->pci_dev; - int i; - int counter = 0; - int index, is_odd; - - /* Host command buffers stay mapped in memory, nothing to clean */ - if (txq->q.id == IWL_CMD_QUEUE_NUM) - return 0; + priv->hw_params.valid_tx_ant = ANT_A | ANT_B; + priv->hw_params.valid_rx_ant = ANT_A | ANT_B; + priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD); - /* Sanity check on number of chunks */ - counter = IWL_GET_BITS(*bd, num_tbs); - if (counter > MAX_NUM_OF_TBS) { - IWL_ERROR("Too many chunks: %i\n", counter); - /* @todo issue fatal error, it is quite serious situation */ - return 0; - } + priv->hw_params.sens = &iwl4965_sensitivity; - /* Unmap chunks, if any. - * TFD info for odd chunks is different format than for even chunks. */ - for (i = 0; i < counter; i++) { - index = i / 2; - is_odd = i & 0x1; - - if (is_odd) - pci_unmap_single( - dev, - IWL_GET_BITS(bd->pa[index], tb2_addr_lo16) | - (IWL_GET_BITS(bd->pa[index], - tb2_addr_hi20) << 16), - IWL_GET_BITS(bd->pa[index], tb2_len), - PCI_DMA_TODEVICE); - - else if (i > 0) - pci_unmap_single(dev, - le32_to_cpu(bd->pa[index].tb1_addr), - IWL_GET_BITS(bd->pa[index], tb1_len), - PCI_DMA_TODEVICE); - - /* Free SKB, if any, for this chunk */ - if (txq->txb[txq->q.read_ptr].skb[i]) { - struct sk_buff *skb = txq->txb[txq->q.read_ptr].skb[i]; - - dev_kfree_skb(skb); - txq->txb[txq->q.read_ptr].skb[i] = NULL; - } - } return 0; } -int iwl4965_hw_reg_set_txpower(struct iwl_priv *priv, s8 power) -{ - IWL_ERROR("TODO: Implement iwl4965_hw_reg_set_txpower!\n"); - return -EINVAL; -} - static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res) { s32 sign = 1; @@ -2177,20 +890,6 @@ static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage, return comp; } -static const struct iwl_channel_info * -iwl4965_get_channel_txpower_info(struct iwl_priv *priv, - enum ieee80211_band band, u16 channel) -{ - const struct iwl_channel_info *ch_info; - - ch_info = iwl_get_channel_info(priv, band, channel); - - if (!is_channel_valid(ch_info)) - return NULL; - - return ch_info; -} - static s32 iwl4965_get_tx_atten_grp(u16 channel) { if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH && @@ -2222,11 +921,11 @@ static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel) s32 b = -1; for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) { - if (priv->eeprom.calib_info.band_info[b].ch_from == 0) + if (priv->calib_info->band_info[b].ch_from == 0) continue; - if ((channel >= priv->eeprom.calib_info.band_info[b].ch_from) - && (channel <= priv->eeprom.calib_info.band_info[b].ch_to)) + if ((channel >= priv->calib_info->band_info[b].ch_from) + && (channel <= priv->calib_info->band_info[b].ch_to)) break; } @@ -2254,14 +953,14 @@ static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2) * in channel number. */ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, - struct iwl4965_eeprom_calib_ch_info *chan_info) + struct iwl_eeprom_calib_ch_info *chan_info) { s32 s = -1; u32 c; u32 m; - const struct iwl4965_eeprom_calib_measure *m1; - const struct iwl4965_eeprom_calib_measure *m2; - struct iwl4965_eeprom_calib_measure *omeas; + const struct iwl_eeprom_calib_measure *m1; + const struct iwl_eeprom_calib_measure *m2; + struct iwl_eeprom_calib_measure *omeas; u32 ch_i1; u32 ch_i2; @@ -2271,8 +970,8 @@ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, return -1; } - ch_i1 = priv->eeprom.calib_info.band_info[s].ch1.ch_num; - ch_i2 = priv->eeprom.calib_info.band_info[s].ch2.ch_num; + ch_i1 = priv->calib_info->band_info[s].ch1.ch_num; + ch_i2 = priv->calib_info->band_info[s].ch2.ch_num; chan_info->ch_num = (u8) channel; IWL_DEBUG_TXPOWER("channel %d subband %d factory cal ch %d & %d\n", @@ -2280,9 +979,9 @@ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) { for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) { - m1 = &(priv->eeprom.calib_info.band_info[s].ch1. + m1 = &(priv->calib_info->band_info[s].ch1. measurements[c][m]); - m2 = &(priv->eeprom.calib_info.band_info[s].ch2. + m2 = &(priv->calib_info->band_info[s].ch2. measurements[c][m]); omeas = &(chan_info->measurements[c][m]); @@ -2601,8 +1300,8 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, int i; int c; const struct iwl_channel_info *ch_info = NULL; - struct iwl4965_eeprom_calib_ch_info ch_eeprom_info; - const struct iwl4965_eeprom_calib_measure *measurement; + struct iwl_eeprom_calib_ch_info ch_eeprom_info; + const struct iwl_eeprom_calib_measure *measurement; s16 voltage; s32 init_voltage; s32 voltage_compensation; @@ -2614,30 +1313,17 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, s32 factory_actual_pwr[2]; s32 power_index; - /* Sanity check requested level (dBm) */ - if (priv->user_txpower_limit < IWL_TX_POWER_TARGET_POWER_MIN) { - IWL_WARNING("Requested user TXPOWER %d below limit.\n", - priv->user_txpower_limit); - return -EINVAL; - } - if (priv->user_txpower_limit > IWL_TX_POWER_TARGET_POWER_MAX) { - IWL_WARNING("Requested user TXPOWER %d above limit.\n", - priv->user_txpower_limit); - return -EINVAL; - } - /* user_txpower_limit is in dBm, convert to half-dBm (half-dB units * are used for indexing into txpower table) */ - user_target_power = 2 * priv->user_txpower_limit; + user_target_power = 2 * priv->tx_power_user_lmt; /* Get current (RXON) channel, band, width */ - ch_info = - iwl4965_get_channel_txpower_info(priv, priv->band, channel); - IWL_DEBUG_TXPOWER("chan %d band %d is_fat %d\n", channel, band, is_fat); - if (!ch_info) + ch_info = iwl_get_channel_info(priv, priv->band, channel); + + if (!is_channel_valid(ch_info)) return -EINVAL; /* get txatten group, used to select 1) thermal txpower adjustment @@ -2659,9 +1345,9 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, /* hardware txpower limits ... * saturation (clipping distortion) txpowers are in half-dBm */ if (band) - saturation_power = priv->eeprom.calib_info.saturation_power24; + saturation_power = priv->calib_info->saturation_power24; else - saturation_power = priv->eeprom.calib_info.saturation_power52; + saturation_power = priv->calib_info->saturation_power52; if (saturation_power < IWL_TX_POWER_SATURATION_MIN || saturation_power > IWL_TX_POWER_SATURATION_MAX) { @@ -2691,7 +1377,7 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info); /* calculate tx gain adjustment based on power supply voltage */ - voltage = priv->eeprom.calib_info.voltage; + voltage = priv->calib_info->voltage; init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage); voltage_compensation = iwl4965_get_voltage_compensation(voltage, init_voltage); @@ -2828,22 +1514,22 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, c, atten_value, power_index, tx_power.s.radio_tx_gain[c], tx_power.s.dsp_predis_atten[c]); - }/* for each chain */ + } /* for each chain */ tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw); - }/* for each rate */ + } /* for each rate */ return 0; } /** - * iwl4965_hw_reg_send_txpower - Configure the TXPOWER level user limit + * iwl4965_send_tx_power - Configure the TXPOWER level user limit * * Uses the active RXON for channel, band, and characteristics (fat, high) - * The power limit is taken from priv->user_txpower_limit. + * The power limit is taken from priv->tx_power_user_lmt. */ -int iwl4965_hw_reg_send_txpower(struct iwl_priv *priv) +static int iwl4965_send_tx_power(struct iwl_priv *priv) { struct iwl4965_txpowertable_cmd cmd = { 0 }; int ret; @@ -2886,8 +1572,8 @@ static int iwl4965_send_rxon_assoc(struct iwl_priv *priv) { int ret = 0; struct iwl4965_rxon_assoc_cmd rxon_assoc; - const struct iwl4965_rxon_cmd *rxon1 = &priv->staging_rxon; - const struct iwl4965_rxon_cmd *rxon2 = &priv->active_rxon; + const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon; + const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon; if ((rxon1->flags == rxon2->flags) && (rxon1->filter_flags == rxon2->filter_flags) && @@ -2963,208 +1649,41 @@ int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel) return rc; } -#define RTS_HCCA_RETRY_LIMIT 3 -#define RTS_DFAULT_RETRY_LIMIT 60 - -void iwl4965_hw_build_tx_cmd_rate(struct iwl_priv *priv, - struct iwl_cmd *cmd, - struct ieee80211_tx_control *ctrl, - struct ieee80211_hdr *hdr, int sta_id, - int is_hcca) -{ - struct iwl4965_tx_cmd *tx = &cmd->cmd.tx; - u8 rts_retry_limit = 0; - u8 data_retry_limit = 0; - u16 fc = le16_to_cpu(hdr->frame_control); - u8 rate_plcp; - u16 rate_flags = 0; - int rate_idx = min(ctrl->tx_rate->hw_value & 0xffff, IWL_RATE_COUNT - 1); - - rate_plcp = iwl4965_rates[rate_idx].plcp; - - rts_retry_limit = (is_hcca) ? - RTS_HCCA_RETRY_LIMIT : RTS_DFAULT_RETRY_LIMIT; - - if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE)) - rate_flags |= RATE_MCS_CCK_MSK; - - - if (ieee80211_is_probe_response(fc)) { - data_retry_limit = 3; - if (data_retry_limit < rts_retry_limit) - rts_retry_limit = data_retry_limit; - } else - data_retry_limit = IWL_DEFAULT_TX_RETRY; - - if (priv->data_retry_limit != -1) - data_retry_limit = priv->data_retry_limit; - - - if (ieee80211_is_data(fc)) { - tx->initial_rate_index = 0; - tx->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; - } else { - switch (fc & IEEE80211_FCTL_STYPE) { - case IEEE80211_STYPE_AUTH: - case IEEE80211_STYPE_DEAUTH: - case IEEE80211_STYPE_ASSOC_REQ: - case IEEE80211_STYPE_REASSOC_REQ: - if (tx->tx_flags & TX_CMD_FLG_RTS_MSK) { - tx->tx_flags &= ~TX_CMD_FLG_RTS_MSK; - tx->tx_flags |= TX_CMD_FLG_CTS_MSK; - } - break; - default: - break; - } - - /* Alternate between antenna A and B for successive frames */ - if (priv->use_ant_b_for_management_frame) { - priv->use_ant_b_for_management_frame = 0; - rate_flags |= RATE_MCS_ANT_B_MSK; - } else { - priv->use_ant_b_for_management_frame = 1; - rate_flags |= RATE_MCS_ANT_A_MSK; - } - } - - tx->rts_retry_limit = rts_retry_limit; - tx->data_retry_limit = data_retry_limit; - tx->rate_n_flags = iwl4965_hw_set_rate_n_flags(rate_plcp, rate_flags); -} - -int iwl4965_hw_get_rx_read(struct iwl_priv *priv) +static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv) { struct iwl4965_shared *s = priv->shared_virt; return le32_to_cpu(s->rb_closed) & 0xFFF; } -int iwl4965_hw_get_temperature(struct iwl_priv *priv) -{ - return priv->temperature; -} - -unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, - struct iwl4965_frame *frame, u8 rate) -{ - struct iwl4965_tx_beacon_cmd *tx_beacon_cmd; - unsigned int frame_size; - - tx_beacon_cmd = &frame->u.beacon; - memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); - - tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - frame_size = iwl4965_fill_beacon_frame(priv, - tx_beacon_cmd->frame, - iwl4965_broadcast_addr, - sizeof(frame->u) - sizeof(*tx_beacon_cmd)); - - BUG_ON(frame_size > MAX_MPDU_SIZE); - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - - if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP)) - tx_beacon_cmd->tx.rate_n_flags = - iwl4965_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK); - else - tx_beacon_cmd->tx.rate_n_flags = - iwl4965_hw_set_rate_n_flags(rate, 0); - - tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK); - return (sizeof(*tx_beacon_cmd) + frame_size); -} - -/* - * Tell 4965 where to find circular buffer of Tx Frame Descriptors for - * given Tx queue, and enable the DMA channel used for that queue. - * - * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA - * channels supported in hardware. - */ -int iwl4965_hw_tx_queue_init(struct iwl_priv *priv, struct iwl4965_tx_queue *txq) -{ - int rc; - unsigned long flags; - int txq_id = txq->q.id; - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - - /* Circular buffer (TFD queue in DRAM) physical base address */ - iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id), - txq->q.dma_addr >> 8); - - /* Enable DMA channel, using same id as for TFD queue */ - iwl_write_direct32( - priv, IWL_FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), - IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL); - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -int iwl4965_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr, - dma_addr_t addr, u16 len) +static int iwl4965_alloc_shared_mem(struct iwl_priv *priv) { - int index, is_odd; - struct iwl4965_tfd_frame *tfd = ptr; - u32 num_tbs = IWL_GET_BITS(*tfd, num_tbs); - - /* Each TFD can point to a maximum 20 Tx buffers */ - if ((num_tbs >= MAX_NUM_OF_TBS) || (num_tbs < 0)) { - IWL_ERROR("Error can not send more than %d chunks\n", - MAX_NUM_OF_TBS); - return -EINVAL; - } - - index = num_tbs / 2; - is_odd = num_tbs & 0x1; + priv->shared_virt = pci_alloc_consistent(priv->pci_dev, + sizeof(struct iwl4965_shared), + &priv->shared_phys); + if (!priv->shared_virt) + return -ENOMEM; - if (!is_odd) { - tfd->pa[index].tb1_addr = cpu_to_le32(addr); - IWL_SET_BITS(tfd->pa[index], tb1_addr_hi, - iwl_get_dma_hi_address(addr)); - IWL_SET_BITS(tfd->pa[index], tb1_len, len); - } else { - IWL_SET_BITS(tfd->pa[index], tb2_addr_lo16, - (u32) (addr & 0xffff)); - IWL_SET_BITS(tfd->pa[index], tb2_addr_hi20, addr >> 16); - IWL_SET_BITS(tfd->pa[index], tb2_len, len); - } + memset(priv->shared_virt, 0, sizeof(struct iwl4965_shared)); - IWL_SET_BITS(*tfd, num_tbs, num_tbs + 1); + priv->rb_closed_offset = offsetof(struct iwl4965_shared, rb_closed); return 0; } -static void iwl4965_hw_card_show_info(struct iwl_priv *priv) +static void iwl4965_free_shared_mem(struct iwl_priv *priv) { - u16 hw_version = priv->eeprom.board_revision_4965; - - IWL_DEBUG_INFO("4965ABGN HW Version %u.%u.%u\n", - ((hw_version >> 8) & 0x0F), - ((hw_version >> 8) >> 4), (hw_version & 0x00FF)); - - IWL_DEBUG_INFO("4965ABGN PBA Number %.16s\n", - priv->eeprom.board_pba_number_4965); + if (priv->shared_virt) + pci_free_consistent(priv->pci_dev, + sizeof(struct iwl4965_shared), + priv->shared_virt, + priv->shared_phys); } -#define IWL_TX_CRC_SIZE 4 -#define IWL_TX_DELIMITER_SIZE 4 - /** * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array */ static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq, + struct iwl_tx_queue *txq, u16 byte_cnt) { int len; @@ -3178,50 +1697,13 @@ static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv, tfd_offset[txq->q.write_ptr], byte_cnt, len); /* If within first 64 entries, duplicate at end */ - if (txq->q.write_ptr < IWL4965_MAX_WIN_SIZE) + if (txq->q.write_ptr < IWL49_MAX_WIN_SIZE) IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. - tfd_offset[IWL4965_QUEUE_SIZE + txq->q.write_ptr], + tfd_offset[IWL49_QUEUE_SIZE + txq->q.write_ptr], byte_cnt, len); } /** - * iwl4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image - * - * Selects how many and which Rx receivers/antennas/chains to use. - * This should not be used for scan command ... it puts data in wrong place. - */ -void iwl4965_set_rxon_chain(struct iwl_priv *priv) -{ - u8 is_single = is_single_stream(priv); - u8 idle_state, rx_state; - - priv->staging_rxon.rx_chain = 0; - rx_state = idle_state = 3; - - /* Tell uCode which antennas are actually connected. - * Before first association, we assume all antennas are connected. - * Just after first association, iwl4965_noise_calibration() - * checks which antennas actually *are* connected. */ - priv->staging_rxon.rx_chain |= - cpu_to_le16(priv->valid_antenna << RXON_RX_CHAIN_VALID_POS); - - /* How many receivers should we use? */ - iwl4965_get_rx_chain_counter(priv, &idle_state, &rx_state); - priv->staging_rxon.rx_chain |= - cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS); - priv->staging_rxon.rx_chain |= - cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS); - - if (!is_single && (rx_state >= 2) && - !test_bit(STATUS_POWER_PMI, &priv->status)) - priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; - else - priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - - IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain); -} - -/** * sign_extend - Sign extend a value using specified bit as sign-bit * * Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1 @@ -3238,12 +1720,12 @@ static s32 sign_extend(u32 oper, int index) } /** - * iwl4965_get_temperature - return the calibrated temperature (in Kelvin) + * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin) * @statistics: Provides the temperature reading from the uCode * * A return of <0 indicates bogus data in the statistics */ -int iwl4965_get_temperature(const struct iwl_priv *priv) +static int iwl4965_hw_get_temperature(const struct iwl_priv *priv) { s32 temperature; s32 vt; @@ -3278,8 +1760,7 @@ int iwl4965_get_temperature(const struct iwl_priv *priv) vt = sign_extend( le32_to_cpu(priv->statistics.general.temperature), 23); - IWL_DEBUG_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", - R1, R2, R3, vt); + IWL_DEBUG_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt); if (R3 == R1) { IWL_ERROR("Calibration conflict R1 == R3\n"); @@ -3290,11 +1771,10 @@ int iwl4965_get_temperature(const struct iwl_priv *priv) * Add offset to center the adjustment around 0 degrees Centigrade. */ temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2); temperature /= (R3 - R1); - temperature = (temperature * 97) / 100 + - TEMPERATURE_CALIB_KELVIN_OFFSET; + temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET; - IWL_DEBUG_TEMP("Calibrated temperature: %dK, %dC\n", temperature, - KELVIN_TO_CELSIUS(temperature)); + IWL_DEBUG_TEMP("Calibrated temperature: %dK, %dC\n", + temperature, KELVIN_TO_CELSIUS(temperature)); return temperature; } @@ -3341,89 +1821,11 @@ static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv) return 1; } -/* Calculate noise level, based on measurements during network silence just - * before arriving beacon. This measurement can be done only if we know - * exactly when to expect beacons, therefore only when we're associated. */ -static void iwl4965_rx_calc_noise(struct iwl_priv *priv) +static void iwl4965_temperature_calib(struct iwl_priv *priv) { - struct statistics_rx_non_phy *rx_info - = &(priv->statistics.rx.general); - int num_active_rx = 0; - int total_silence = 0; - int bcn_silence_a = - le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; - int bcn_silence_b = - le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; - int bcn_silence_c = - le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; - - if (bcn_silence_a) { - total_silence += bcn_silence_a; - num_active_rx++; - } - if (bcn_silence_b) { - total_silence += bcn_silence_b; - num_active_rx++; - } - if (bcn_silence_c) { - total_silence += bcn_silence_c; - num_active_rx++; - } - - /* Average among active antennas */ - if (num_active_rx) - priv->last_rx_noise = (total_silence / num_active_rx) - 107; - else - priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; - - IWL_DEBUG_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", - bcn_silence_a, bcn_silence_b, bcn_silence_c, - priv->last_rx_noise); -} - -void iwl4965_hw_rx_statistics(struct iwl_priv *priv, struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - int change; s32 temp; - IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n", - (int)sizeof(priv->statistics), pkt->len); - - change = ((priv->statistics.general.temperature != - pkt->u.stats.general.temperature) || - ((priv->statistics.flag & - STATISTICS_REPLY_FLG_FAT_MODE_MSK) != - (pkt->u.stats.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK))); - - memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics)); - - set_bit(STATUS_STATISTICS, &priv->status); - - /* Reschedule the statistics timer to occur in - * REG_RECALIB_PERIOD seconds to ensure we get a - * thermal update even if the uCode doesn't give - * us one */ - mod_timer(&priv->statistics_periodic, jiffies + - msecs_to_jiffies(REG_RECALIB_PERIOD * 1000)); - - if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && - (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) { - iwl4965_rx_calc_noise(priv); -#ifdef CONFIG_IWL4965_SENSITIVITY - queue_work(priv->workqueue, &priv->sensitivity_work); -#endif - } - - iwl_leds_background(priv); - - /* If the hardware hasn't reported a change in - * temperature then don't bother computing a - * calibrated temperature value */ - if (!change) - return; - - temp = iwl4965_get_temperature(priv); + temp = iwl4965_hw_get_temperature(priv); if (temp < 0) return; @@ -3442,810 +1844,12 @@ void iwl4965_hw_rx_statistics(struct iwl_priv *priv, struct iwl4965_rx_mem_buffe priv->temperature = temp; set_bit(STATUS_TEMPERATURE, &priv->status); - if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && - iwl4965_is_temp_calib_needed(priv)) + if (!priv->disable_tx_power_cal && + unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && + iwl4965_is_temp_calib_needed(priv)) queue_work(priv->workqueue, &priv->txpower_work); } -static void iwl4965_add_radiotap(struct iwl_priv *priv, - struct sk_buff *skb, - struct iwl4965_rx_phy_res *rx_start, - struct ieee80211_rx_status *stats, - u32 ampdu_status) -{ - s8 signal = stats->ssi; - s8 noise = 0; - int rate = stats->rate_idx; - u64 tsf = stats->mactime; - __le16 antenna; - __le16 phy_flags_hw = rx_start->phy_flags; - struct iwl4965_rt_rx_hdr { - struct ieee80211_radiotap_header rt_hdr; - __le64 rt_tsf; /* TSF */ - u8 rt_flags; /* radiotap packet flags */ - u8 rt_rate; /* rate in 500kb/s */ - __le16 rt_channelMHz; /* channel in MHz */ - __le16 rt_chbitmask; /* channel bitfield */ - s8 rt_dbmsignal; /* signal in dBm, kluged to signed */ - s8 rt_dbmnoise; - u8 rt_antenna; /* antenna number */ - } __attribute__ ((packed)) *iwl4965_rt; - - /* TODO: We won't have enough headroom for HT frames. Fix it later. */ - if (skb_headroom(skb) < sizeof(*iwl4965_rt)) { - if (net_ratelimit()) - printk(KERN_ERR "not enough headroom [%d] for " - "radiotap head [%zd]\n", - skb_headroom(skb), sizeof(*iwl4965_rt)); - return; - } - - /* put radiotap header in front of 802.11 header and data */ - iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt)); - - /* initialise radiotap header */ - iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; - iwl4965_rt->rt_hdr.it_pad = 0; - - /* total header + data */ - put_unaligned(cpu_to_le16(sizeof(*iwl4965_rt)), - &iwl4965_rt->rt_hdr.it_len); - - /* Indicate all the fields we add to the radiotap header */ - put_unaligned(cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) | - (1 << IEEE80211_RADIOTAP_FLAGS) | - (1 << IEEE80211_RADIOTAP_RATE) | - (1 << IEEE80211_RADIOTAP_CHANNEL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | - (1 << IEEE80211_RADIOTAP_ANTENNA)), - &iwl4965_rt->rt_hdr.it_present); - - /* Zero the flags, we'll add to them as we go */ - iwl4965_rt->rt_flags = 0; - - put_unaligned(cpu_to_le64(tsf), &iwl4965_rt->rt_tsf); - - iwl4965_rt->rt_dbmsignal = signal; - iwl4965_rt->rt_dbmnoise = noise; - - /* Convert the channel frequency and set the flags */ - put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz); - if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) - put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM | - IEEE80211_CHAN_5GHZ), - &iwl4965_rt->rt_chbitmask); - else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) - put_unaligned(cpu_to_le16(IEEE80211_CHAN_CCK | - IEEE80211_CHAN_2GHZ), - &iwl4965_rt->rt_chbitmask); - else /* 802.11g */ - put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM | - IEEE80211_CHAN_2GHZ), - &iwl4965_rt->rt_chbitmask); - - if (rate == -1) - iwl4965_rt->rt_rate = 0; - else { - if (stats->band == IEEE80211_BAND_5GHZ) - rate += IWL_FIRST_OFDM_RATE; - - iwl4965_rt->rt_rate = iwl4965_rates[rate].ieee; - } - - /* - * "antenna number" - * - * It seems that the antenna field in the phy flags value - * is actually a bitfield. This is undefined by radiotap, - * it wants an actual antenna number but I always get "7" - * for most legacy frames I receive indicating that the - * same frame was received on all three RX chains. - * - * I think this field should be removed in favour of a - * new 802.11n radiotap field "RX chains" that is defined - * as a bitmask. - */ - antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; - iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4; - - /* set the preamble flag if appropriate */ - if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; - - stats->flag |= RX_FLAG_RADIOTAP; -} - -static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len) -{ - /* 0 - mgmt, 1 - cnt, 2 - data */ - int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2; - priv->rx_stats[idx].cnt++; - priv->rx_stats[idx].bytes += len; -} - -static u32 iwl4965_translate_rx_status(u32 decrypt_in) -{ - u32 decrypt_out = 0; - - if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == - RX_RES_STATUS_STATION_FOUND) - decrypt_out |= (RX_RES_STATUS_STATION_FOUND | - RX_RES_STATUS_NO_STATION_INFO_MISMATCH); - - decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); - - /* packet was not encrypted */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_NONE) - return decrypt_out; - - /* packet was encrypted with unknown alg */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_ERR) - return decrypt_out; - - /* decryption was not done in HW */ - if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != - RX_MPDU_RES_STATUS_DEC_DONE_MSK) - return decrypt_out; - - switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { - - case RX_RES_STATUS_SEC_TYPE_CCMP: - /* alg is CCM: check MIC only */ - if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) - /* Bad MIC */ - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - - break; - - case RX_RES_STATUS_SEC_TYPE_TKIP: - if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { - /* Bad TTAK */ - decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; - break; - } - /* fall through if TTAK OK */ - default: - if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - break; - }; - - IWL_DEBUG_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", - decrypt_in, decrypt_out); - - return decrypt_out; -} - -static void iwl4965_handle_data_packet(struct iwl_priv *priv, int is_data, - int include_phy, - struct iwl4965_rx_mem_buffer *rxb, - struct ieee80211_rx_status *stats) -{ - struct iwl4965_rx_packet *pkt = (struct iwl4965_rx_packet *)rxb->skb->data; - struct iwl4965_rx_phy_res *rx_start = (include_phy) ? - (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : NULL; - struct ieee80211_hdr *hdr; - u16 len; - __le32 *rx_end; - unsigned int skblen; - u32 ampdu_status; - u32 ampdu_status_legacy; - - if (!include_phy && priv->last_phy_res[0]) - rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1]; - - if (!rx_start) { - IWL_ERROR("MPDU frame without a PHY data\n"); - return; - } - if (include_phy) { - hdr = (struct ieee80211_hdr *)((u8 *) & rx_start[1] + - rx_start->cfg_phy_cnt); - - len = le16_to_cpu(rx_start->byte_count); - - rx_end = (__le32 *) ((u8 *) & pkt->u.raw[0] + - sizeof(struct iwl4965_rx_phy_res) + - rx_start->cfg_phy_cnt + len); - - } else { - struct iwl4965_rx_mpdu_res_start *amsdu = - (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; - - hdr = (struct ieee80211_hdr *)(pkt->u.raw + - sizeof(struct iwl4965_rx_mpdu_res_start)); - len = le16_to_cpu(amsdu->byte_count); - rx_start->byte_count = amsdu->byte_count; - rx_end = (__le32 *) (((u8 *) hdr) + len); - } - if (len > priv->hw_params.max_pkt_size || len < 16) { - IWL_WARNING("byte count out of range [16,4K] : %d\n", len); - return; - } - - ampdu_status = le32_to_cpu(*rx_end); - skblen = ((u8 *) rx_end - (u8 *) & pkt->u.raw[0]) + sizeof(u32); - - if (!include_phy) { - /* New status scheme, need to translate */ - ampdu_status_legacy = ampdu_status; - ampdu_status = iwl4965_translate_rx_status(ampdu_status); - } - - /* start from MAC */ - skb_reserve(rxb->skb, (void *)hdr - (void *)pkt); - skb_put(rxb->skb, len); /* end where data ends */ - - /* We only process data packets if the interface is open */ - if (unlikely(!priv->is_open)) { - IWL_DEBUG_DROP_LIMIT - ("Dropping packet while interface is not open.\n"); - return; - } - - stats->flag = 0; - hdr = (struct ieee80211_hdr *)rxb->skb->data; - - if (!priv->cfg->mod_params->sw_crypto) - iwl4965_set_decrypted_flag(priv, rxb->skb, ampdu_status, stats); - - if (priv->add_radiotap) - iwl4965_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status); - - iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len); - ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); - priv->alloc_rxb_skb--; - rxb->skb = NULL; -} - -/* Calc max signal level (dBm) among 3 possible receivers */ -static int iwl4965_calc_rssi(struct iwl4965_rx_phy_res *rx_resp) -{ - /* data from PHY/DSP regarding signal strength, etc., - * contents are always there, not configurable by host. */ - struct iwl4965_rx_non_cfg_phy *ncphy = - (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy; - u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL_AGC_DB_MASK) - >> IWL_AGC_DB_POS; - - u32 valid_antennae = - (le16_to_cpu(rx_resp->phy_flags) & RX_PHY_FLAGS_ANTENNAE_MASK) - >> RX_PHY_FLAGS_ANTENNAE_OFFSET; - u8 max_rssi = 0; - u32 i; - - /* Find max rssi among 3 possible receivers. - * These values are measured by the digital signal processor (DSP). - * They should stay fairly constant even as the signal strength varies, - * if the radio's automatic gain control (AGC) is working right. - * AGC value (see below) will provide the "interesting" info. */ - for (i = 0; i < 3; i++) - if (valid_antennae & (1 << i)) - max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); - - IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", - ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], - max_rssi, agc); - - /* dBm = max_rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. */ - return (max_rssi - agc - IWL_RSSI_OFFSET); -} - -#ifdef CONFIG_IWL4965_HT - -void iwl4965_init_ht_hw_capab(struct iwl_priv *priv, - struct ieee80211_ht_info *ht_info, - enum ieee80211_band band) -{ - ht_info->cap = 0; - memset(ht_info->supp_mcs_set, 0, 16); - - ht_info->ht_supported = 1; - - if (band == IEEE80211_BAND_5GHZ) { - ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH; - ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40; - ht_info->supp_mcs_set[4] = 0x01; - } - ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD; - ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20; - ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS & - (IWL_MIMO_PS_NONE << 2)); - - if (priv->cfg->mod_params->amsdu_size_8K) - ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU; - - ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; - ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; - - ht_info->supp_mcs_set[0] = 0xFF; - ht_info->supp_mcs_set[1] = 0xFF; -} -#endif /* CONFIG_IWL4965_HT */ - -static void iwl4965_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) -{ - unsigned long flags; - - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK; - priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; - priv->stations[sta_id].sta.sta.modify_mask = 0; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC); -} - -static void iwl4965_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr) -{ - /* FIXME: need locking over ps_status ??? */ - u8 sta_id = iwl4965_hw_find_station(priv, addr); - - if (sta_id != IWL_INVALID_STATION) { - u8 sta_awake = priv->stations[sta_id]. - ps_status == STA_PS_STATUS_WAKE; - - if (sta_awake && ps_bit) - priv->stations[sta_id].ps_status = STA_PS_STATUS_SLEEP; - else if (!sta_awake && !ps_bit) { - iwl4965_sta_modify_ps_wake(priv, sta_id); - priv->stations[sta_id].ps_status = STA_PS_STATUS_WAKE; - } - } -} -#ifdef CONFIG_IWLWIFI_DEBUG - -/** - * iwl4965_dbg_report_frame - dump frame to syslog during debug sessions - * - * You may hack this function to show different aspects of received frames, - * including selective frame dumps. - * group100 parameter selects whether to show 1 out of 100 good frames. - * - * TODO: This was originally written for 3945, need to audit for - * proper operation with 4965. - */ -static void iwl4965_dbg_report_frame(struct iwl_priv *priv, - struct iwl4965_rx_packet *pkt, - struct ieee80211_hdr *header, int group100) -{ - u32 to_us; - u32 print_summary = 0; - u32 print_dump = 0; /* set to 1 to dump all frames' contents */ - u32 hundred = 0; - u32 dataframe = 0; - u16 fc; - u16 seq_ctl; - u16 channel; - u16 phy_flags; - int rate_sym; - u16 length; - u16 status; - u16 bcn_tmr; - u32 tsf_low; - u64 tsf; - u8 rssi; - u8 agc; - u16 sig_avg; - u16 noise_diff; - struct iwl4965_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); - struct iwl4965_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); - struct iwl4965_rx_frame_end *rx_end = IWL_RX_END(pkt); - u8 *data = IWL_RX_DATA(pkt); - - if (likely(!(iwl_debug_level & IWL_DL_RX))) - return; - - /* MAC header */ - fc = le16_to_cpu(header->frame_control); - seq_ctl = le16_to_cpu(header->seq_ctrl); - - /* metadata */ - channel = le16_to_cpu(rx_hdr->channel); - phy_flags = le16_to_cpu(rx_hdr->phy_flags); - rate_sym = rx_hdr->rate; - length = le16_to_cpu(rx_hdr->len); - - /* end-of-frame status and timestamp */ - status = le32_to_cpu(rx_end->status); - bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp); - tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff; - tsf = le64_to_cpu(rx_end->timestamp); - - /* signal statistics */ - rssi = rx_stats->rssi; - agc = rx_stats->agc; - sig_avg = le16_to_cpu(rx_stats->sig_avg); - noise_diff = le16_to_cpu(rx_stats->noise_diff); - - to_us = !compare_ether_addr(header->addr1, priv->mac_addr); - - /* if data frame is to us and all is good, - * (optionally) print summary for only 1 out of every 100 */ - if (to_us && (fc & ~IEEE80211_FCTL_PROTECTED) == - (IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) { - dataframe = 1; - if (!group100) - print_summary = 1; /* print each frame */ - else if (priv->framecnt_to_us < 100) { - priv->framecnt_to_us++; - print_summary = 0; - } else { - priv->framecnt_to_us = 0; - print_summary = 1; - hundred = 1; - } - } else { - /* print summary for all other frames */ - print_summary = 1; - } - - if (print_summary) { - char *title; - int rate_idx; - u32 bitrate; - - if (hundred) - title = "100Frames"; - else if (fc & IEEE80211_FCTL_RETRY) - title = "Retry"; - else if (ieee80211_is_assoc_response(fc)) - title = "AscRsp"; - else if (ieee80211_is_reassoc_response(fc)) - title = "RasRsp"; - else if (ieee80211_is_probe_response(fc)) { - title = "PrbRsp"; - print_dump = 1; /* dump frame contents */ - } else if (ieee80211_is_beacon(fc)) { - title = "Beacon"; - print_dump = 1; /* dump frame contents */ - } else if (ieee80211_is_atim(fc)) - title = "ATIM"; - else if (ieee80211_is_auth(fc)) - title = "Auth"; - else if (ieee80211_is_deauth(fc)) - title = "DeAuth"; - else if (ieee80211_is_disassoc(fc)) - title = "DisAssoc"; - else - title = "Frame"; - - rate_idx = iwl4965_hwrate_to_plcp_idx(rate_sym); - if (unlikely(rate_idx == -1)) - bitrate = 0; - else - bitrate = iwl4965_rates[rate_idx].ieee / 2; - - /* print frame summary. - * MAC addresses show just the last byte (for brevity), - * but you can hack it to show more, if you'd like to. */ - if (dataframe) - IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, " - "len=%u, rssi=%d, chnl=%d, rate=%u, \n", - title, fc, header->addr1[5], - length, rssi, channel, bitrate); - else { - /* src/dst addresses assume managed mode */ - IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, " - "src=0x%02x, rssi=%u, tim=%lu usec, " - "phy=0x%02x, chnl=%d\n", - title, fc, header->addr1[5], - header->addr3[5], rssi, - tsf_low - priv->scan_start_tsf, - phy_flags, channel); - } - } - if (print_dump) - iwl_print_hex_dump(IWL_DL_RX, data, length); -} -#else -static inline void iwl4965_dbg_report_frame(struct iwl_priv *priv, - struct iwl4965_rx_packet *pkt, - struct ieee80211_hdr *header, - int group100) -{ -} -#endif - - - -/* Called for REPLY_RX (legacy ABG frames), or - * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ -static void iwl4965_rx_reply_rx(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct ieee80211_hdr *header; - struct ieee80211_rx_status rx_status; - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - /* Use phy data (Rx signal strength, etc.) contained within - * this rx packet for legacy frames, - * or phy data cached from REPLY_RX_PHY_CMD for HT frames. */ - int include_phy = (pkt->hdr.cmd == REPLY_RX); - struct iwl4965_rx_phy_res *rx_start = (include_phy) ? - (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : - (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1]; - __le32 *rx_end; - unsigned int len = 0; - u16 fc; - u8 network_packet; - - rx_status.mactime = le64_to_cpu(rx_start->timestamp); - rx_status.freq = - ieee80211_channel_to_frequency(le16_to_cpu(rx_start->channel)); - rx_status.band = (rx_start->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - rx_status.rate_idx = - iwl4965_hwrate_to_plcp_idx(le32_to_cpu(rx_start->rate_n_flags)); - if (rx_status.band == IEEE80211_BAND_5GHZ) - rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; - - rx_status.antenna = 0; - rx_status.flag = 0; - - if ((unlikely(rx_start->cfg_phy_cnt > 20))) { - IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n", - rx_start->cfg_phy_cnt); - return; - } - - if (!include_phy) { - if (priv->last_phy_res[0]) - rx_start = (struct iwl4965_rx_phy_res *) - &priv->last_phy_res[1]; - else - rx_start = NULL; - } - - if (!rx_start) { - IWL_ERROR("MPDU frame without a PHY data\n"); - return; - } - - if (include_phy) { - header = (struct ieee80211_hdr *)((u8 *) & rx_start[1] - + rx_start->cfg_phy_cnt); - - len = le16_to_cpu(rx_start->byte_count); - rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt + - sizeof(struct iwl4965_rx_phy_res) + len); - } else { - struct iwl4965_rx_mpdu_res_start *amsdu = - (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; - - header = (void *)(pkt->u.raw + - sizeof(struct iwl4965_rx_mpdu_res_start)); - len = le16_to_cpu(amsdu->byte_count); - rx_end = (__le32 *) (pkt->u.raw + - sizeof(struct iwl4965_rx_mpdu_res_start) + len); - } - - if (!(*rx_end & RX_RES_STATUS_NO_CRC32_ERROR) || - !(*rx_end & RX_RES_STATUS_NO_RXE_OVERFLOW)) { - IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", - le32_to_cpu(*rx_end)); - return; - } - - priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp); - - /* Find max signal strength (dBm) among 3 antenna/receiver chains */ - rx_status.ssi = iwl4965_calc_rssi(rx_start); - - /* Meaningful noise values are available only from beacon statistics, - * which are gathered only when associated, and indicate noise - * only for the associated network channel ... - * Ignore these noise values while scanning (other channels) */ - if (iwl_is_associated(priv) && - !test_bit(STATUS_SCANNING, &priv->status)) { - rx_status.noise = priv->last_rx_noise; - rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi, - rx_status.noise); - } else { - rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE; - rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi, 0); - } - - /* Reset beacon noise level if not associated. */ - if (!iwl_is_associated(priv)) - priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; - - /* Set "1" to report good data frames in groups of 100 */ - /* FIXME: need to optimze the call: */ - iwl4965_dbg_report_frame(priv, pkt, header, 1); - - IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n", - rx_status.ssi, rx_status.noise, rx_status.signal, - (unsigned long long)rx_status.mactime); - - network_packet = iwl4965_is_network_packet(priv, header); - if (network_packet) { - priv->last_rx_rssi = rx_status.ssi; - priv->last_beacon_time = priv->ucode_beacon_time; - priv->last_tsf = le64_to_cpu(rx_start->timestamp); - } - - fc = le16_to_cpu(header->frame_control); - switch (fc & IEEE80211_FCTL_FTYPE) { - case IEEE80211_FTYPE_MGMT: - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) - iwl4965_update_ps_mode(priv, fc & IEEE80211_FCTL_PM, - header->addr2); - iwl4965_handle_data_packet(priv, 0, include_phy, rxb, &rx_status); - break; - - case IEEE80211_FTYPE_CTL: -#ifdef CONFIG_IWL4965_HT - switch (fc & IEEE80211_FCTL_STYPE) { - case IEEE80211_STYPE_BACK_REQ: - IWL_DEBUG_HT("IEEE80211_STYPE_BACK_REQ arrived\n"); - iwl4965_handle_data_packet(priv, 0, include_phy, - rxb, &rx_status); - break; - default: - break; - } -#endif - break; - - case IEEE80211_FTYPE_DATA: { - DECLARE_MAC_BUF(mac1); - DECLARE_MAC_BUF(mac2); - DECLARE_MAC_BUF(mac3); - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) - iwl4965_update_ps_mode(priv, fc & IEEE80211_FCTL_PM, - header->addr2); - - if (unlikely(!network_packet)) - IWL_DEBUG_DROP("Dropping (non network): " - "%s, %s, %s\n", - print_mac(mac1, header->addr1), - print_mac(mac2, header->addr2), - print_mac(mac3, header->addr3)); - else if (unlikely(iwl4965_is_duplicate_packet(priv, header))) - IWL_DEBUG_DROP("Dropping (dup): %s, %s, %s\n", - print_mac(mac1, header->addr1), - print_mac(mac2, header->addr2), - print_mac(mac3, header->addr3)); - else - iwl4965_handle_data_packet(priv, 1, include_phy, rxb, - &rx_status); - break; - } - default: - break; - - } -} - -/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). - * This will be used later in iwl4965_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ -static void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - priv->last_phy_res[0] = 1; - memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]), - sizeof(struct iwl4965_rx_phy_res)); -} -static void iwl4965_rx_missed_beacon_notif(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) - -{ -#ifdef CONFIG_IWL4965_SENSITIVITY - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_missed_beacon_notif *missed_beacon; - - missed_beacon = &pkt->u.missed_beacon; - if (le32_to_cpu(missed_beacon->consequtive_missed_beacons) > 5) { - IWL_DEBUG_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n", - le32_to_cpu(missed_beacon->consequtive_missed_beacons), - le32_to_cpu(missed_beacon->total_missed_becons), - le32_to_cpu(missed_beacon->num_recvd_beacons), - le32_to_cpu(missed_beacon->num_expected_beacons)); - priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT; - if (unlikely(!test_bit(STATUS_SCANNING, &priv->status))) - queue_work(priv->workqueue, &priv->sensitivity_work); - } -#endif /*CONFIG_IWL4965_SENSITIVITY*/ -} -#ifdef CONFIG_IWL4965_HT - -/** - * iwl4965_sta_modify_enable_tid_tx - Enable Tx for this TID in station table - */ -static void iwl4965_sta_modify_enable_tid_tx(struct iwl_priv *priv, - int sta_id, int tid) -{ - unsigned long flags; - - /* Remove "disable" flag, to enable Tx for this TID */ - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; - priv->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC); -} - -/** - * iwl4965_tx_status_reply_compressed_ba - Update tx status from block-ack - * - * Go through block-ack's bitmap of ACK'd frames, update driver's record of - * ACK vs. not. This gets sent to mac80211, then to rate scaling algo. - */ -static int iwl4965_tx_status_reply_compressed_ba(struct iwl_priv *priv, - struct iwl4965_ht_agg *agg, - struct iwl4965_compressed_ba_resp* - ba_resp) - -{ - int i, sh, ack; - u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl); - u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); - u64 bitmap; - int successes = 0; - struct ieee80211_tx_status *tx_status; - - if (unlikely(!agg->wait_for_ba)) { - IWL_ERROR("Received BA when not expected\n"); - return -EINVAL; - } - - /* Mark that the expected block-ack response arrived */ - agg->wait_for_ba = 0; - IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl); - - /* Calculate shift to align block-ack bits with our Tx window bits */ - sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl>>4); - if (sh < 0) /* tbw something is wrong with indices */ - sh += 0x100; - - /* don't use 64-bit values for now */ - bitmap = le64_to_cpu(ba_resp->bitmap) >> sh; - - if (agg->frame_count > (64 - sh)) { - IWL_DEBUG_TX_REPLY("more frames than bitmap size"); - return -1; - } - - /* check for success or failure according to the - * transmitted bitmap and block-ack bitmap */ - bitmap &= agg->bitmap; - - /* For each frame attempted in aggregation, - * update driver's record of tx frame's status. */ - for (i = 0; i < agg->frame_count ; i++) { - ack = bitmap & (1 << i); - successes += !!ack; - IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", - ack? "ACK":"NACK", i, (agg->start_idx + i) & 0xff, - agg->start_idx + i); - } - - tx_status = &priv->txq[scd_flow].txb[agg->start_idx].status; - tx_status->flags = IEEE80211_TX_STATUS_ACK; - tx_status->flags |= IEEE80211_TX_STATUS_AMPDU; - tx_status->ampdu_ack_map = successes; - tx_status->ampdu_ack_len = agg->frame_count; - iwl4965_hwrate_to_tx_control(priv, agg->rate_n_flags, - &tx_status->control); - - IWL_DEBUG_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap); - - return 0; -} - /** * iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration */ @@ -4256,22 +1860,24 @@ static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv, * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), - (0 << SCD_QUEUE_STTS_REG_POS_ACTIVE)| - (1 << SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); + (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)| + (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); } /** - * txq_id must be greater than IWL_BACK_QUEUE_FIRST_ID + * txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE * priv->lock must be held by the caller */ -static int iwl4965_tx_queue_agg_disable(struct iwl_priv *priv, u16 txq_id, - u16 ssn_idx, u8 tx_fifo) +static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id, + u16 ssn_idx, u8 tx_fifo) { int ret = 0; - if (IWL_BACK_QUEUE_FIRST_ID > txq_id) { - IWL_WARNING("queue number too small: %d, must be > %d\n", - txq_id, IWL_BACK_QUEUE_FIRST_ID); + if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) || + (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) { + IWL_WARNING("queue number out of range: %d, must be %d to %d\n", + txq_id, IWL49_FIRST_AMPDU_QUEUE, + IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1); return -EINVAL; } @@ -4289,7 +1895,7 @@ static int iwl4965_tx_queue_agg_disable(struct iwl_priv *priv, u16 txq_id, iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx); iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id)); - iwl4965_txq_ctx_deactivate(priv, txq_id); + iwl_txq_ctx_deactivate(priv, txq_id); iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0); iwl_release_nic_access(priv); @@ -4297,121 +1903,6 @@ static int iwl4965_tx_queue_agg_disable(struct iwl_priv *priv, u16 txq_id, return 0; } -int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id, - u8 tid, int txq_id) -{ - struct iwl4965_queue *q = &priv->txq[txq_id].q; - u8 *addr = priv->stations[sta_id].sta.sta.addr; - struct iwl4965_tid_data *tid_data = &priv->stations[sta_id].tid[tid]; - - switch (priv->stations[sta_id].tid[tid].agg.state) { - case IWL_EMPTYING_HW_QUEUE_DELBA: - /* We are reclaiming the last packet of the */ - /* aggregated HW queue */ - if (txq_id == tid_data->agg.txq_id && - q->read_ptr == q->write_ptr) { - u16 ssn = SEQ_TO_SN(tid_data->seq_number); - int tx_fifo = default_tid_to_tx_fifo[tid]; - IWL_DEBUG_HT("HW queue empty: continue DELBA flow\n"); - iwl4965_tx_queue_agg_disable(priv, txq_id, - ssn, tx_fifo); - tid_data->agg.state = IWL_AGG_OFF; - ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, addr, tid); - } - break; - case IWL_EMPTYING_HW_QUEUE_ADDBA: - /* We are reclaiming the last packet of the queue */ - if (tid_data->tfds_in_queue == 0) { - IWL_DEBUG_HT("HW queue empty: continue ADDBA flow\n"); - tid_data->agg.state = IWL_AGG_ON; - ieee80211_start_tx_ba_cb_irqsafe(priv->hw, addr, tid); - } - break; - } - return 0; -} - -/** - * iwl4965_queue_dec_wrap - Decrement queue index, wrap back to end if needed - * @index -- current index - * @n_bd -- total number of entries in queue (s/b power of 2) - */ -static inline int iwl4965_queue_dec_wrap(int index, int n_bd) -{ - return (index == 0) ? n_bd - 1 : index - 1; -} - -/** - * iwl4965_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA - * - * Handles block-acknowledge notification from device, which reports success - * of frames sent via aggregation. - */ -static void iwl4965_rx_reply_compressed_ba(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba; - int index; - struct iwl4965_tx_queue *txq = NULL; - struct iwl4965_ht_agg *agg; - DECLARE_MAC_BUF(mac); - - /* "flow" corresponds to Tx queue */ - u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); - - /* "ssn" is start of block-ack Tx window, corresponds to index - * (in Tx queue's circular buffer) of first TFD/frame in window */ - u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); - - if (scd_flow >= priv->hw_params.max_txq_num) { - IWL_ERROR("BUG_ON scd_flow is bigger than number of queues"); - return; - } - - txq = &priv->txq[scd_flow]; - agg = &priv->stations[ba_resp->sta_id].tid[ba_resp->tid].agg; - - /* Find index just before block-ack window */ - index = iwl4965_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); - - /* TODO: Need to get this copy more safely - now good for debug */ - - IWL_DEBUG_TX_REPLY("REPLY_COMPRESSED_BA [%d]Received from %s, " - "sta_id = %d\n", - agg->wait_for_ba, - print_mac(mac, (u8*) &ba_resp->sta_addr_lo32), - ba_resp->sta_id); - IWL_DEBUG_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx, scd_flow = " - "%d, scd_ssn = %d\n", - ba_resp->tid, - ba_resp->seq_ctl, - (unsigned long long)le64_to_cpu(ba_resp->bitmap), - ba_resp->scd_flow, - ba_resp->scd_ssn); - IWL_DEBUG_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx \n", - agg->start_idx, - (unsigned long long)agg->bitmap); - - /* Update driver's record of ACK vs. not for each frame in window */ - iwl4965_tx_status_reply_compressed_ba(priv, agg, ba_resp); - - /* Release all TFDs before the SSN, i.e. all TFDs in front of - * block-ack window (we assume that they've been successfully - * transmitted ... if not, it's too late anyway). */ - if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { - int freed = iwl4965_tx_queue_reclaim(priv, scd_flow, index); - priv->stations[ba_resp->sta_id]. - tid[ba_resp->tid].tfds_in_queue -= freed; - if (iwl4965_queue_space(&txq->q) > txq->q.low_mark && - priv->mac80211_registered && - agg->state != IWL_EMPTYING_HW_QUEUE_DELBA) - ieee80211_wake_queue(priv->hw, scd_flow); - iwl4965_check_empty_hw_queue(priv, ba_resp->sta_id, - ba_resp->tid, scd_flow); - } -} - /** * iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue */ @@ -4422,10 +1913,10 @@ static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid, u32 tbl_dw; u16 scd_q2ratid; - scd_q2ratid = ra_tid & SCD_QUEUE_RA_TID_MAP_RATID_MSK; + scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK; tbl_dw_addr = priv->scd_base_addr + - SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); + IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr); @@ -4443,31 +1934,34 @@ static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid, /** * iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue * - * NOTE: txq_id must be greater than IWL_BACK_QUEUE_FIRST_ID, + * NOTE: txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE, * i.e. it must be one of the higher queues used for aggregation */ -static int iwl4965_tx_queue_agg_enable(struct iwl_priv *priv, int txq_id, - int tx_fifo, int sta_id, int tid, - u16 ssn_idx) +static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id, + int tx_fifo, int sta_id, int tid, u16 ssn_idx) { unsigned long flags; - int rc; + int ret; u16 ra_tid; - if (IWL_BACK_QUEUE_FIRST_ID > txq_id) - IWL_WARNING("queue number too small: %d, must be > %d\n", - txq_id, IWL_BACK_QUEUE_FIRST_ID); + if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) || + (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) { + IWL_WARNING("queue number out of range: %d, must be %d to %d\n", + txq_id, IWL49_FIRST_AMPDU_QUEUE, + IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1); + return -EINVAL; + } ra_tid = BUILD_RAxTID(sta_id, tid); /* Modify device's station table to Tx this TID */ - iwl4965_sta_modify_enable_tid_tx(priv, sta_id, tid); + iwl_sta_modify_enable_tid_tx(priv, sta_id, tid); spin_lock_irqsave(&priv->lock, flags); - rc = iwl_grab_nic_access(priv); - if (rc) { + ret = iwl_grab_nic_access(priv); + if (ret) { spin_unlock_irqrestore(&priv->lock, flags); - return rc; + return ret; } /* Stop this Tx queue before configuring it */ @@ -4487,14 +1981,14 @@ static int iwl4965_tx_queue_agg_enable(struct iwl_priv *priv, int txq_id, /* Set up Tx window size and frame limit for this queue */ iwl_write_targ_mem(priv, - priv->scd_base_addr + SCD_CONTEXT_QUEUE_OFFSET(txq_id), - (SCD_WIN_SIZE << SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & - SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); + priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), + (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & + IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); iwl_write_targ_mem(priv, priv->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), - (SCD_FRAME_LIMIT << SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) - & SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), + (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) + & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id)); @@ -4507,444 +2001,317 @@ static int iwl4965_tx_queue_agg_enable(struct iwl_priv *priv, int txq_id, return 0; } -#endif /* CONFIG_IWL4965_HT */ -/** - * iwl4965_add_station - Initialize a station's hardware rate table - * - * The uCode's station table contains a table of fallback rates - * for automatic fallback during transmission. - * - * NOTE: This sets up a default set of values. These will be replaced later - * if the driver's iwl-4965-rs rate scaling algorithm is used, instead of - * rc80211_simple. - * - * NOTE: Run REPLY_ADD_STA command to set up station table entry, before - * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, - * which requires station table entry to exist). - */ -void iwl4965_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap) +static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len) { - int i, r; - struct iwl_link_quality_cmd link_cmd = { - .reserved1 = 0, - }; - u16 rate_flags; - - /* Set up the rate scaling to start at selected rate, fall back - * all the way down to 1M in IEEE order, and then spin on 1M */ - if (is_ap) - r = IWL_RATE_54M_INDEX; - else if (priv->band == IEEE80211_BAND_5GHZ) - r = IWL_RATE_6M_INDEX; - else - r = IWL_RATE_1M_INDEX; - - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { - rate_flags = 0; - if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE) - rate_flags |= RATE_MCS_CCK_MSK; - - /* Use Tx antenna B only */ - rate_flags |= RATE_MCS_ANT_B_MSK; - rate_flags &= ~RATE_MCS_ANT_A_MSK; - - link_cmd.rs_table[i].rate_n_flags = - iwl4965_hw_set_rate_n_flags(iwl4965_rates[r].plcp, rate_flags); - r = iwl4965_get_prev_ieee_rate(r); + switch (cmd_id) { + case REPLY_RXON: + return (u16) sizeof(struct iwl4965_rxon_cmd); + default: + return len; } - - link_cmd.general_params.single_stream_ant_msk = 2; - link_cmd.general_params.dual_stream_ant_msk = 3; - link_cmd.agg_params.agg_dis_start_th = 3; - link_cmd.agg_params.agg_time_limit = cpu_to_le16(4000); - - /* Update the rate scaling for control frame Tx to AP */ - link_cmd.sta_id = is_ap ? IWL_AP_ID : priv->hw_params.bcast_sta_id; - - iwl_send_cmd_pdu_async(priv, REPLY_TX_LINK_QUALITY_CMD, - sizeof(link_cmd), &link_cmd, NULL); } -#ifdef CONFIG_IWL4965_HT - -static u8 iwl4965_is_channel_extension(struct iwl_priv *priv, - enum ieee80211_band band, - u16 channel, u8 extension_chan_offset) +static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data) { - const struct iwl_channel_info *ch_info; - - ch_info = iwl_get_channel_info(priv, band, channel); - if (!is_channel_valid(ch_info)) - return 0; + struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data; + addsta->mode = cmd->mode; + memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); + memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo)); + addsta->station_flags = cmd->station_flags; + addsta->station_flags_msk = cmd->station_flags_msk; + addsta->tid_disable_tx = cmd->tid_disable_tx; + addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; + addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; + addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; + addsta->reserved1 = __constant_cpu_to_le16(0); + addsta->reserved2 = __constant_cpu_to_le32(0); - if (extension_chan_offset == IWL_EXT_CHANNEL_OFFSET_NONE) - return 0; - - if ((ch_info->fat_extension_channel == extension_chan_offset) || - (ch_info->fat_extension_channel == HT_IE_EXT_CHANNEL_MAX)) - return 1; - - return 0; + return (u16)sizeof(struct iwl4965_addsta_cmd); } -static u8 iwl4965_is_fat_tx_allowed(struct iwl_priv *priv, - struct ieee80211_ht_info *sta_ht_inf) +static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp) { - struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config; - - if ((!iwl_ht_conf->is_ht) || - (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) || - (iwl_ht_conf->extension_chan_offset == IWL_EXT_CHANNEL_OFFSET_NONE)) - return 0; - - if (sta_ht_inf) { - if ((!sta_ht_inf->ht_supported) || - (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH))) - return 0; - } - - return (iwl4965_is_channel_extension(priv, priv->band, - iwl_ht_conf->control_channel, - iwl_ht_conf->extension_chan_offset)); -} - -void iwl4965_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) -{ - struct iwl4965_rxon_cmd *rxon = &priv->staging_rxon; - u32 val; - - if (!ht_info->is_ht) - return; - - /* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */ - if (iwl4965_is_fat_tx_allowed(priv, NULL)) - rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK; - else - rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | - RXON_FLG_CHANNEL_MODE_PURE_40_MSK); - - if (le16_to_cpu(rxon->channel) != ht_info->control_channel) { - IWL_DEBUG_ASSOC("control diff than current %d %d\n", - le16_to_cpu(rxon->channel), - ht_info->control_channel); - rxon->channel = cpu_to_le16(ht_info->control_channel); - return; - } - - /* Note: control channel is opposite of extension channel */ - switch (ht_info->extension_chan_offset) { - case IWL_EXT_CHANNEL_OFFSET_ABOVE: - rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); - break; - case IWL_EXT_CHANNEL_OFFSET_BELOW: - rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; - break; - case IWL_EXT_CHANNEL_OFFSET_NONE: - default: - rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK; - break; - } - - val = ht_info->ht_protection; - - rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS); - - iwl4965_set_rxon_chain(priv); - - IWL_DEBUG_ASSOC("supported HT rate 0x%X %X " - "rxon flags 0x%X operation mode :0x%X " - "extension channel offset 0x%x " - "control chan %d\n", - ht_info->supp_mcs_set[0], ht_info->supp_mcs_set[1], - le32_to_cpu(rxon->flags), ht_info->ht_protection, - ht_info->extension_chan_offset, - ht_info->control_channel); - return; + return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN; } -void iwl4965_set_ht_add_station(struct iwl_priv *priv, u8 index, - struct ieee80211_ht_info *sta_ht_inf) +/** + * iwl4965_tx_status_reply_tx - Handle Tx rspnse for frames in aggregation queue + */ +static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, + struct iwl_ht_agg *agg, + struct iwl4965_tx_resp *tx_resp, + int txq_id, u16 start_idx) { - __le32 sta_flags; - u8 mimo_ps_mode; - - if (!sta_ht_inf || !sta_ht_inf->ht_supported) - goto done; - - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2; + u16 status; + struct agg_tx_status *frame_status = tx_resp->u.agg_status; + struct ieee80211_tx_status *tx_status = NULL; + struct ieee80211_hdr *hdr = NULL; + u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); + int i, sh, idx; + u16 seq; + if (agg->wait_for_ba) + IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n"); + + agg->frame_count = tx_resp->frame_count; + agg->start_idx = start_idx; + agg->rate_n_flags = rate_n_flags; + agg->bitmap = 0; + + /* # frames attempted by Tx command */ + if (agg->frame_count == 1) { + /* Only one frame was attempted; no block-ack will arrive */ + status = le16_to_cpu(frame_status[0].status); + idx = start_idx; + + /* FIXME: code repetition */ + IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n", + agg->frame_count, agg->start_idx, idx); + + tx_status = &(priv->txq[txq_id].txb[idx].status); + tx_status->retry_count = tx_resp->failure_frame; + tx_status->control.flags &= ~IEEE80211_TXCTL_AMPDU; + tx_status->flags |= iwl_is_tx_success(status)? + IEEE80211_TX_STATUS_ACK : 0; + iwl_hwrate_to_tx_control(priv, rate_n_flags, &tx_status->control); + /* FIXME: code repetition end */ + + IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n", + status & 0xff, tx_resp->failure_frame); + IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags); + + agg->wait_for_ba = 0; + } else { + /* Two or more frames were attempted; expect block-ack */ + u64 bitmap = 0; + int start = agg->start_idx; + + /* Construct bit-map of pending frames within Tx window */ + for (i = 0; i < agg->frame_count; i++) { + u16 sc; + status = le16_to_cpu(frame_status[i].status); + seq = le16_to_cpu(frame_status[i].sequence); + idx = SEQ_TO_INDEX(seq); + txq_id = SEQ_TO_QUEUE(seq); + + if (status & (AGG_TX_STATE_FEW_BYTES_MSK | + AGG_TX_STATE_ABORT_MSK)) + continue; + + IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n", + agg->frame_count, txq_id, idx); + + hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx); + + sc = le16_to_cpu(hdr->seq_ctrl); + if (idx != (SEQ_TO_SN(sc) & 0xff)) { + IWL_ERROR("BUG_ON idx doesn't match seq control" + " idx=%d, seq_idx=%d, seq=%d\n", + idx, SEQ_TO_SN(sc), + hdr->seq_ctrl); + return -1; + } - sta_flags = priv->stations[index].sta.station_flags; + IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", + i, idx, SEQ_TO_SN(sc)); + + sh = idx - start; + if (sh > 64) { + sh = (start - idx) + 0xff; + bitmap = bitmap << sh; + sh = 0; + start = idx; + } else if (sh < -64) + sh = 0xff - (start - idx); + else if (sh < 0) { + sh = start - idx; + start = idx; + bitmap = bitmap << sh; + sh = 0; + } + bitmap |= 1ULL << sh; + IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n", + start, (unsigned long long)bitmap); + } - sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK); + agg->bitmap = bitmap; + agg->start_idx = start; + IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n", + agg->frame_count, agg->start_idx, + (unsigned long long)agg->bitmap); - switch (mimo_ps_mode) { - case WLAN_HT_CAP_MIMO_PS_STATIC: - sta_flags |= STA_FLG_MIMO_DIS_MSK; - break; - case WLAN_HT_CAP_MIMO_PS_DYNAMIC: - sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK; - break; - case WLAN_HT_CAP_MIMO_PS_DISABLED: - break; - default: - IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode); - break; + if (bitmap) + agg->wait_for_ba = 1; } - - sta_flags |= cpu_to_le32( - (u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS); - - sta_flags |= cpu_to_le32( - (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); - - if (iwl4965_is_fat_tx_allowed(priv, sta_ht_inf)) - sta_flags |= STA_FLG_FAT_EN_MSK; - else - sta_flags &= ~STA_FLG_FAT_EN_MSK; - - priv->stations[index].sta.station_flags = sta_flags; - done: - return; -} - -static void iwl4965_sta_modify_add_ba_tid(struct iwl_priv *priv, - int sta_id, int tid, u16 ssn) -{ - unsigned long flags; - - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.station_flags_msk = 0; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; - priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid; - priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC); -} - -static void iwl4965_sta_modify_del_ba_tid(struct iwl_priv *priv, - int sta_id, int tid) -{ - unsigned long flags; - - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.station_flags_msk = 0; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; - priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + return 0; } -/* - * Find first available (lowest unused) Tx Queue, mark it "active". - * Called only when finding queue for aggregation. - * Should never return anything < 7, because they should already - * be in use as EDCA AC (0-3), Command (4), HCCA (5, 6). +/** + * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response */ -static int iwl4965_txq_ctx_activate_free(struct iwl_priv *priv) -{ - int txq_id; - - for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) - if (!test_and_set_bit(txq_id, &priv->txq_ctx_active_msk)) - return txq_id; - return -1; -} - -static int iwl4965_mac_ht_tx_agg_start(struct ieee80211_hw *hw, const u8 *da, - u16 tid, u16 *start_seq_num) -{ - struct iwl_priv *priv = hw->priv; - int sta_id; - int tx_fifo; - int txq_id; - int ssn = -1; - int ret = 0; - unsigned long flags; - struct iwl4965_tid_data *tid_data; - DECLARE_MAC_BUF(mac); - - if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo))) - tx_fifo = default_tid_to_tx_fifo[tid]; - else - return -EINVAL; - - IWL_WARNING("%s on da = %s tid = %d\n", - __func__, print_mac(mac, da), tid); - - sta_id = iwl4965_hw_find_station(priv, da); - if (sta_id == IWL_INVALID_STATION) - return -ENXIO; +static void iwl4965_rx_reply_tx(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + int txq_id = SEQ_TO_QUEUE(sequence); + int index = SEQ_TO_INDEX(sequence); + struct iwl_tx_queue *txq = &priv->txq[txq_id]; + struct ieee80211_tx_status *tx_status; + struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; + u32 status = le32_to_cpu(tx_resp->u.status); + int tid = MAX_TID_COUNT, sta_id = IWL_INVALID_STATION; + __le16 fc; + struct ieee80211_hdr *hdr; + u8 *qc = NULL; - if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) { - IWL_ERROR("Start AGG when state is not IWL_AGG_OFF !\n"); - return -ENXIO; + if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) { + IWL_ERROR("Read index for DMA queue txq_id (%d) index %d " + "is out of range [0-%d] %d %d\n", txq_id, + index, txq->q.n_bd, txq->q.write_ptr, + txq->q.read_ptr); + return; } - txq_id = iwl4965_txq_ctx_activate_free(priv); - if (txq_id == -1) - return -ENXIO; - - spin_lock_irqsave(&priv->sta_lock, flags); - tid_data = &priv->stations[sta_id].tid[tid]; - ssn = SEQ_TO_SN(tid_data->seq_number); - tid_data->agg.txq_id = txq_id; - spin_unlock_irqrestore(&priv->sta_lock, flags); + tx_status = &(txq->txb[txq->q.read_ptr].status); - *start_seq_num = ssn; - ret = iwl4965_tx_queue_agg_enable(priv, txq_id, tx_fifo, - sta_id, tid, ssn); - if (ret) - return ret; - - ret = 0; - if (tid_data->tfds_in_queue == 0) { - printk(KERN_ERR "HW queue is empty\n"); - tid_data->agg.state = IWL_AGG_ON; - ieee80211_start_tx_ba_cb_irqsafe(hw, da, tid); - } else { - IWL_DEBUG_HT("HW queue is NOT empty: %d packets in HW queue\n", - tid_data->tfds_in_queue); - tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA; + hdr = iwl_tx_queue_get_hdr(priv, txq_id, index); + fc = hdr->frame_control; + if (ieee80211_is_data_qos(fc)) { + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; } - return ret; -} -static int iwl4965_mac_ht_tx_agg_stop(struct ieee80211_hw *hw, const u8 *da, - u16 tid) -{ - - struct iwl_priv *priv = hw->priv; - int tx_fifo_id, txq_id, sta_id, ssn = -1; - struct iwl4965_tid_data *tid_data; - int ret, write_ptr, read_ptr; - unsigned long flags; - DECLARE_MAC_BUF(mac); - - if (!da) { - IWL_ERROR("da = NULL\n"); - return -EINVAL; + sta_id = iwl_get_ra_sta_id(priv, hdr); + if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) { + IWL_ERROR("Station not known\n"); + return; } - if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo))) - tx_fifo_id = default_tid_to_tx_fifo[tid]; - else - return -EINVAL; + if (txq->sched_retry) { + const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp); + struct iwl_ht_agg *agg = NULL; - sta_id = iwl4965_hw_find_station(priv, da); + if (!qc) + return; - if (sta_id == IWL_INVALID_STATION) - return -ENXIO; + agg = &priv->stations[sta_id].tid[tid].agg; - if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON) - IWL_WARNING("Stopping AGG while state not IWL_AGG_ON\n"); + iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); - tid_data = &priv->stations[sta_id].tid[tid]; - ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; - txq_id = tid_data->agg.txq_id; - write_ptr = priv->txq[txq_id].q.write_ptr; - read_ptr = priv->txq[txq_id].q.read_ptr; + /* check if BAR is needed */ + if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status)) + tx_status->flags |= IEEE80211_TX_STATUS_AMPDU_NO_BACK; - /* The queue is not empty */ - if (write_ptr != read_ptr) { - IWL_DEBUG_HT("Stopping a non empty AGG HW QUEUE\n"); - priv->stations[sta_id].tid[tid].agg.state = - IWL_EMPTYING_HW_QUEUE_DELBA; - return 0; - } + if (txq->q.read_ptr != (scd_ssn & 0xff)) { + int freed, ampdu_q; + index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); + IWL_DEBUG_TX_REPLY("Retry scheduler reclaim scd_ssn " + "%d index %d\n", scd_ssn , index); + freed = iwl_tx_queue_reclaim(priv, txq_id, index); + priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; - IWL_DEBUG_HT("HW queue empty\n");; - priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF; + if (iwl_queue_space(&txq->q) > txq->q.low_mark && + txq_id >= 0 && priv->mac80211_registered && + agg->state != IWL_EMPTYING_HW_QUEUE_DELBA) { + /* calculate mac80211 ampdu sw queue to wake */ + ampdu_q = txq_id - IWL49_FIRST_AMPDU_QUEUE + + priv->hw->queues; + if (agg->state == IWL_AGG_OFF) + ieee80211_wake_queue(priv->hw, txq_id); + else + ieee80211_wake_queue(priv->hw, ampdu_q); + } + iwl_txq_check_empty(priv, sta_id, tid, txq_id); + } + } else { + tx_status->retry_count = tx_resp->failure_frame; + tx_status->flags |= + iwl_is_tx_success(status) ? IEEE80211_TX_STATUS_ACK : 0; + iwl_hwrate_to_tx_control(priv, + le32_to_cpu(tx_resp->rate_n_flags), + &tx_status->control); + + IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) rate_n_flags " + "0x%x retries %d\n", txq_id, + iwl_get_tx_fail_reason(status), + status, le32_to_cpu(tx_resp->rate_n_flags), + tx_resp->failure_frame); + + IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index); + + if (index != -1) { + int freed = iwl_tx_queue_reclaim(priv, txq_id, index); + if (tid != MAX_TID_COUNT) + priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + if (iwl_queue_space(&txq->q) > txq->q.low_mark && + (txq_id >= 0) && priv->mac80211_registered) + ieee80211_wake_queue(priv->hw, txq_id); + if (tid != MAX_TID_COUNT) + iwl_txq_check_empty(priv, sta_id, tid, txq_id); + } + } - spin_lock_irqsave(&priv->lock, flags); - ret = iwl4965_tx_queue_agg_disable(priv, txq_id, ssn, tx_fifo_id); - spin_unlock_irqrestore(&priv->lock, flags); + if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK)) + IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n"); +} - if (ret) - return ret; +static int iwl4965_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) +{ + /* data from PHY/DSP regarding signal strength, etc., + * contents are always there, not configurable by host. */ + struct iwl4965_rx_non_cfg_phy *ncphy = + (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; + u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK) + >> IWL49_AGC_DB_POS; - ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, da, tid); + u32 valid_antennae = + (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK) + >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; + u8 max_rssi = 0; + u32 i; - IWL_DEBUG_INFO("iwl4965_mac_ht_tx_agg_stop on da=%s tid=%d\n", - print_mac(mac, da), tid); + /* Find max rssi among 3 possible receivers. + * These values are measured by the digital signal processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's automatic gain control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. */ + for (i = 0; i < 3; i++) + if (valid_antennae & (1 << i)) + max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); - return 0; -} + IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", + ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], + max_rssi, agc); -int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, - enum ieee80211_ampdu_mlme_action action, - const u8 *addr, u16 tid, u16 *ssn) -{ - struct iwl_priv *priv = hw->priv; - int sta_id; - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_HT("A-MPDU action on da=%s tid=%d ", - print_mac(mac, addr), tid); - sta_id = iwl4965_hw_find_station(priv, addr); - switch (action) { - case IEEE80211_AMPDU_RX_START: - IWL_DEBUG_HT("start Rx\n"); - iwl4965_sta_modify_add_ba_tid(priv, sta_id, tid, *ssn); - break; - case IEEE80211_AMPDU_RX_STOP: - IWL_DEBUG_HT("stop Rx\n"); - iwl4965_sta_modify_del_ba_tid(priv, sta_id, tid); - break; - case IEEE80211_AMPDU_TX_START: - IWL_DEBUG_HT("start Tx\n"); - return iwl4965_mac_ht_tx_agg_start(hw, addr, tid, ssn); - case IEEE80211_AMPDU_TX_STOP: - IWL_DEBUG_HT("stop Tx\n"); - return iwl4965_mac_ht_tx_agg_stop(hw, addr, tid); - default: - IWL_DEBUG_HT("unknown\n"); - return -EINVAL; - break; - } - return 0; + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc - IWL_RSSI_OFFSET; } -#endif /* CONFIG_IWL4965_HT */ /* Set up 4965-specific Rx frame reply handlers */ -void iwl4965_hw_rx_handler_setup(struct iwl_priv *priv) +static void iwl4965_rx_handler_setup(struct iwl_priv *priv) { /* Legacy Rx frames */ - priv->rx_handlers[REPLY_RX] = iwl4965_rx_reply_rx; - - /* High-throughput (HT) Rx frames */ - priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy; - priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx; - - priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] = - iwl4965_rx_missed_beacon_notif; - -#ifdef CONFIG_IWL4965_HT - priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl4965_rx_reply_compressed_ba; -#endif /* CONFIG_IWL4965_HT */ + priv->rx_handlers[REPLY_RX] = iwl_rx_reply_rx; + /* Tx response */ + priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx; } -void iwl4965_hw_setup_deferred_work(struct iwl_priv *priv) +static void iwl4965_setup_deferred_work(struct iwl_priv *priv) { INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work, priv); -#ifdef CONFIG_IWL4965_SENSITIVITY - INIT_WORK(&priv->sensitivity_work, iwl4965_bg_sensitivity_work, priv); -#endif - init_timer(&priv->statistics_periodic); - priv->statistics_periodic.data = (unsigned long)priv; - priv->statistics_periodic.function = iwl4965_bg_statistics_periodic; } -void iwl4965_hw_cancel_deferred_work(struct iwl_priv *priv) +static void iwl4965_cancel_deferred_work(struct iwl_priv *priv) { - del_timer_sync(&priv->statistics_periodic); - - cancel_delayed_work(&priv->init_alive_start); +#if 0 /* Not in RHEL5 */ + cancel_work_sync(&priv->txpower_work); +#else + flush_workqueue(priv->workqueue); +#endif } @@ -4953,23 +2320,56 @@ static struct iwl_hcmd_ops iwl4965_hcmd = { }; static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = { - .enqueue_hcmd = iwl4965_enqueue_hcmd, + .get_hcmd_size = iwl4965_get_hcmd_size, + .build_addsta_hcmd = iwl4965_build_addsta_hcmd, + .chain_noise_reset = iwl4965_chain_noise_reset, + .gain_computation = iwl4965_gain_computation, + .rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag, + .calc_rssi = iwl4965_calc_rssi, }; static struct iwl_lib_ops iwl4965_lib = { - .init_drv = iwl4965_init_drv, .set_hw_params = iwl4965_hw_set_hw_params, + .alloc_shared_mem = iwl4965_alloc_shared_mem, + .free_shared_mem = iwl4965_free_shared_mem, + .shared_mem_rx_idx = iwl4965_shared_mem_rx_idx, .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl, - .hw_nic_init = iwl4965_hw_nic_init, + .txq_set_sched = iwl4965_txq_set_sched, + .txq_agg_enable = iwl4965_txq_agg_enable, + .txq_agg_disable = iwl4965_txq_agg_disable, + .rx_handler_setup = iwl4965_rx_handler_setup, + .setup_deferred_work = iwl4965_setup_deferred_work, + .cancel_deferred_work = iwl4965_cancel_deferred_work, .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr, .alive_notify = iwl4965_alive_notify, + .init_alive_start = iwl4965_init_alive_start, .load_ucode = iwl4965_load_bsm, + .apm_ops = { + .init = iwl4965_apm_init, + .reset = iwl4965_apm_reset, + .stop = iwl4965_apm_stop, + .config = iwl4965_nic_config, + .set_pwr_src = iwl4965_set_pwr_src, + }, .eeprom_ops = { + .regulatory_bands = { + EEPROM_REGULATORY_BAND_1_CHANNELS, + EEPROM_REGULATORY_BAND_2_CHANNELS, + EEPROM_REGULATORY_BAND_3_CHANNELS, + EEPROM_REGULATORY_BAND_4_CHANNELS, + EEPROM_REGULATORY_BAND_5_CHANNELS, + EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS, + EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS + }, .verify_signature = iwlcore_eeprom_verify_signature, .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, .release_semaphore = iwlcore_eeprom_release_semaphore, + .check_version = iwl4965_eeprom_check_version, + .query_addr = iwlcore_eeprom_query_addr, }, - .radio_kill_sw = iwl4965_radio_kill_sw, + .send_tx_power = iwl4965_send_tx_power, + .update_chain_flags = iwl4965_update_chain_flags, + .temperature = iwl4965_temperature_calib, }; static struct iwl_ops iwl4965_ops = { @@ -4982,16 +2382,20 @@ struct iwl_cfg iwl4965_agn_cfg = { .name = "4965AGN", .fw_name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode", .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .eeprom_size = IWL4965_EEPROM_IMG_SIZE, .ops = &iwl4965_ops, .mod_params = &iwl4965_mod_params, }; +/* Module firmware */ +MODULE_FIRMWARE("iwlwifi-4965" IWL4965_UCODE_API ".ucode"); + module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444); MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); module_param_named(disable, iwl4965_mod_params.disable, int, 0444); MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444); -MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])\n"); +MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); module_param_named(debug, iwl4965_mod_params.debug, int, 0444); MODULE_PARM_DESC(debug, "debug output mask"); module_param_named( @@ -5000,10 +2404,14 @@ MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)"); module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444); MODULE_PARM_DESC(queues_num, "number of hw queues."); - /* QoS */ module_param_named(qos_enable, iwl4965_mod_params.enable_qos, int, 0444); MODULE_PARM_DESC(qos_enable, "enable all QoS functionality"); +/* 11n */ +module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, 0444); +MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444); MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); +module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444); +MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error"); diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.h b/drivers/net/wireless/iwlwifi/iwl-4965.h index d82cb41..e69de29 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965.h @@ -1,1262 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * James P. Ketrenos <ipw2100-admin@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -/* - * Please use this file (iwl-4965.h) for driver implementation definitions. - * Please use iwl-4965-commands.h for uCode API definitions. - * Please use iwl-4965-hw.h for hardware-related definitions. - */ - -#ifndef __iwl_4965_h__ -#define __iwl_4965_h__ - -#include <linux/pci.h> /* for struct pci_device_id */ -#include <linux/kernel.h> -#include <net/ieee80211_radiotap.h> - -#define DRV_NAME "iwl4965" -#include "iwl-rfkill.h" -#include "iwl-eeprom.h" -#include "iwl-4965-hw.h" -#include "iwl-csr.h" -#include "iwl-prph.h" -#include "iwl-debug.h" -#include "iwl-led.h" - -/* configuration for the iwl4965 */ -extern struct iwl_cfg iwl4965_agn_cfg; - -/* Change firmware file name, using "-" and incrementing number, - * *only* when uCode interface or architecture changes so that it - * is not compatible with earlier drivers. - * This number will also appear in << 8 position of 1st dword of uCode file */ -#define IWL4965_UCODE_API "-1" - - -/* Default noise level to report when noise measurement is not available. - * This may be because we're: - * 1) Not associated (4965, no beacon statistics being sent to driver) - * 2) Scanning (noise measurement does not apply to associated channel) - * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) - * Use default noise value of -127 ... this is below the range of measurable - * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. - * Also, -127 works better than 0 when averaging frames with/without - * noise info (e.g. averaging might be done in app); measured dBm values are - * always negative ... using a negative value as the default keeps all - * averages within an s8's (used in some apps) range of negative values. */ -#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) - -enum iwl4965_antenna { - IWL_ANTENNA_DIVERSITY, - IWL_ANTENNA_MAIN, - IWL_ANTENNA_AUX -}; - -/* - * RTS threshold here is total size [2347] minus 4 FCS bytes - * Per spec: - * a value of 0 means RTS on all data/management packets - * a value > max MSDU size means no RTS - * else RTS for data/management frames where MPDU is larger - * than RTS value. - */ -#define DEFAULT_RTS_THRESHOLD 2347U -#define MIN_RTS_THRESHOLD 0U -#define MAX_RTS_THRESHOLD 2347U -#define MAX_MSDU_SIZE 2304U -#define MAX_MPDU_SIZE 2346U -#define DEFAULT_BEACON_INTERVAL 100U -#define DEFAULT_SHORT_RETRY_LIMIT 7U -#define DEFAULT_LONG_RETRY_LIMIT 4U - -struct iwl4965_rx_mem_buffer { - dma_addr_t dma_addr; - struct sk_buff *skb; - struct list_head list; -}; - -/* - * Generic queue structure - * - * Contains common data for Rx and Tx queues - */ -struct iwl4965_queue { - int n_bd; /* number of BDs in this queue */ - int write_ptr; /* 1-st empty entry (index) host_w*/ - int read_ptr; /* last used entry (index) host_r*/ - dma_addr_t dma_addr; /* physical addr for BD's */ - int n_window; /* safe queue window */ - u32 id; - int low_mark; /* low watermark, resume queue if free - * space more than this */ - int high_mark; /* high watermark, stop queue if free - * space less than this */ -} __attribute__ ((packed)); - -#define MAX_NUM_OF_TBS (20) - -/* One for each TFD */ -struct iwl4965_tx_info { - struct ieee80211_tx_status status; - struct sk_buff *skb[MAX_NUM_OF_TBS]; -}; - -/** - * struct iwl4965_tx_queue - Tx Queue for DMA - * @q: generic Rx/Tx queue descriptor - * @bd: base of circular buffer of TFDs - * @cmd: array of command/Tx buffers - * @dma_addr_cmd: physical address of cmd/tx buffer array - * @txb: array of per-TFD driver data - * @need_update: indicates need to update read/write index - * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled - * - * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame - * descriptors) and required locking structures. - */ -struct iwl4965_tx_queue { - struct iwl4965_queue q; - struct iwl4965_tfd_frame *bd; - struct iwl_cmd *cmd; - dma_addr_t dma_addr_cmd; - struct iwl4965_tx_info *txb; - int need_update; - int sched_retry; - int active; -}; - -#define IWL_NUM_SCAN_RATES (2) - -struct iwl4965_channel_tgd_info { - u8 type; - s8 max_power; -}; - -struct iwl4965_channel_tgh_info { - s64 last_radar_time; -}; - -/* current Tx power values to use, one for each rate for each channel. - * requested power is limited by: - * -- regulatory EEPROM limits for this channel - * -- hardware capabilities (clip-powers) - * -- spectrum management - * -- user preference (e.g. iwconfig) - * when requested power is set, base power index must also be set. */ -struct iwl4965_channel_power_info { - struct iwl4965_tx_power tpc; /* actual radio and DSP gain settings */ - s8 power_table_index; /* actual (compenst'd) index into gain table */ - s8 base_power_index; /* gain index for power at factory temp. */ - s8 requested_power; /* power (dBm) requested for this chnl/rate */ -}; - -/* current scan Tx power values to use, one for each scan rate for each - * channel. */ -struct iwl4965_scan_power_info { - struct iwl4965_tx_power tpc; /* actual radio and DSP gain settings */ - s8 power_table_index; /* actual (compenst'd) index into gain table */ - s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ -}; - -/* For fat_extension_channel */ -enum { - HT_IE_EXT_CHANNEL_NONE = 0, - HT_IE_EXT_CHANNEL_ABOVE, - HT_IE_EXT_CHANNEL_INVALID, - HT_IE_EXT_CHANNEL_BELOW, - HT_IE_EXT_CHANNEL_MAX -}; - -/* - * One for each channel, holds all channel setup data - * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant - * with one another! - */ -#define IWL4965_MAX_RATE (33) - -struct iwl_channel_info { - struct iwl4965_channel_tgd_info tgd; - struct iwl4965_channel_tgh_info tgh; - struct iwl4965_eeprom_channel eeprom; /* EEPROM regulatory limit */ - struct iwl4965_eeprom_channel fat_eeprom; /* EEPROM regulatory limit for - * FAT channel */ - - u8 channel; /* channel number */ - u8 flags; /* flags copied from EEPROM */ - s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ - s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */ - s8 min_power; /* always 0 */ - s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ - - u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */ - u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */ - enum ieee80211_band band; - - /* Radio/DSP gain settings for each "normal" data Tx rate. - * These include, in addition to RF and DSP gain, a few fields for - * remembering/modifying gain settings (indexes). */ - struct iwl4965_channel_power_info power_info[IWL4965_MAX_RATE]; - - /* FAT channel info */ - s8 fat_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ - s8 fat_curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */ - s8 fat_min_power; /* always 0 */ - s8 fat_scan_power; /* (dBm) eeprom, direct scans, any rate */ - u8 fat_flags; /* flags copied from EEPROM */ - u8 fat_extension_channel; /* HT_IE_EXT_CHANNEL_* */ - - /* Radio/DSP gain settings for each scan rate, for directed scans. */ - struct iwl4965_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES]; -}; - -struct iwl4965_clip_group { - /* maximum power level to prevent clipping for each rate, derived by - * us from this band's saturation power in EEPROM */ - const s8 clip_powers[IWL_MAX_RATES]; -}; - -#include "iwl-4965-rs.h" - -#define IWL_TX_FIFO_AC0 0 -#define IWL_TX_FIFO_AC1 1 -#define IWL_TX_FIFO_AC2 2 -#define IWL_TX_FIFO_AC3 3 -#define IWL_TX_FIFO_HCCA_1 5 -#define IWL_TX_FIFO_HCCA_2 6 -#define IWL_TX_FIFO_NONE 7 - -/* Minimum number of queues. MAX_NUM is defined in hw specific files */ -#define IWL_MIN_NUM_QUEUES 4 - -/* Power management (not Tx power) structures */ - -struct iwl4965_power_vec_entry { - struct iwl4965_powertable_cmd cmd; - u8 no_dtim; -}; -#define IWL_POWER_RANGE_0 (0) -#define IWL_POWER_RANGE_1 (1) - -#define IWL_POWER_MODE_CAM 0x00 /* Continuously Aware Mode, always on */ -#define IWL_POWER_INDEX_3 0x03 -#define IWL_POWER_INDEX_5 0x05 -#define IWL_POWER_AC 0x06 -#define IWL_POWER_BATTERY 0x07 -#define IWL_POWER_LIMIT 0x07 -#define IWL_POWER_MASK 0x0F -#define IWL_POWER_ENABLED 0x10 -#define IWL_POWER_LEVEL(x) ((x) & IWL_POWER_MASK) - -struct iwl4965_power_mgr { - spinlock_t lock; - struct iwl4965_power_vec_entry pwr_range_0[IWL_POWER_AC]; - struct iwl4965_power_vec_entry pwr_range_1[IWL_POWER_AC]; - u8 active_index; - u32 dtim_val; -}; - -#define IEEE80211_DATA_LEN 2304 -#define IEEE80211_4ADDR_LEN 30 -#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) -#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) - -struct iwl4965_frame { - union { - struct ieee80211_hdr frame; - struct iwl4965_tx_beacon_cmd beacon; - u8 raw[IEEE80211_FRAME_LEN]; - u8 cmd[360]; - } u; - struct list_head list; -}; - -#define SEQ_TO_QUEUE(x) ((x >> 8) & 0xbf) -#define QUEUE_TO_SEQ(x) ((x & 0xbf) << 8) -#define SEQ_TO_INDEX(x) ((u8)(x & 0xff)) -#define INDEX_TO_SEQ(x) ((u8)(x & 0xff)) -#define SEQ_HUGE_FRAME (0x4000) -#define SEQ_RX_FRAME __constant_cpu_to_le16(0x8000) -#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) -#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) -#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) - -enum { - /* CMD_SIZE_NORMAL = 0, */ - CMD_SIZE_HUGE = (1 << 0), - /* CMD_SYNC = 0, */ - CMD_ASYNC = (1 << 1), - /* CMD_NO_SKB = 0, */ - CMD_WANT_SKB = (1 << 2), -}; - -struct iwl_cmd; -struct iwl_priv; - -struct iwl_cmd_meta { - struct iwl_cmd_meta *source; - union { - struct sk_buff *skb; - int (*callback)(struct iwl_priv *priv, - struct iwl_cmd *cmd, struct sk_buff *skb); - } __attribute__ ((packed)) u; - - /* The CMD_SIZE_HUGE flag bit indicates that the command - * structure is stored at the end of the shared queue memory. */ - u32 flags; - -} __attribute__ ((packed)); - -/** - * struct iwl_cmd - * - * For allocation of the command and tx queues, this establishes the overall - * size of the largest command we send to uCode, except for a scan command - * (which is relatively huge; space is allocated separately). - */ -struct iwl_cmd { - struct iwl_cmd_meta meta; /* driver data */ - struct iwl_cmd_header hdr; /* uCode API */ - union { - struct iwl4965_addsta_cmd addsta; - struct iwl4965_led_cmd led; - u32 flags; - u8 val8; - u16 val16; - u32 val32; - struct iwl4965_bt_cmd bt; - struct iwl4965_rxon_time_cmd rxon_time; - struct iwl4965_powertable_cmd powertable; - struct iwl4965_qosparam_cmd qosparam; - struct iwl4965_tx_cmd tx; - struct iwl4965_tx_beacon_cmd tx_beacon; - struct iwl4965_rxon_assoc_cmd rxon_assoc; - u8 *indirect; - u8 payload[360]; - } __attribute__ ((packed)) cmd; -} __attribute__ ((packed)); - -struct iwl_host_cmd { - u8 id; - u16 len; - struct iwl_cmd_meta meta; - const void *data; -}; - -#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_cmd) - \ - sizeof(struct iwl_cmd_meta)) - -/* - * RX related structures and functions - */ -#define RX_FREE_BUFFERS 64 -#define RX_LOW_WATERMARK 8 - -#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 -#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 -#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 - -/** - * struct iwl4965_rx_queue - Rx queue - * @processed: Internal index to last handled Rx packet - * @read: Shared index to newest available Rx buffer - * @write: Shared index to oldest written Rx packet - * @free_count: Number of pre-allocated buffers in rx_free - * @rx_free: list of free SKBs for use - * @rx_used: List of Rx buffers with no SKB - * @need_update: flag to indicate we need to update read/write index - * - * NOTE: rx_free and rx_used are used as a FIFO for iwl4965_rx_mem_buffers - */ -struct iwl4965_rx_queue { - __le32 *bd; - dma_addr_t dma_addr; - struct iwl4965_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; - struct iwl4965_rx_mem_buffer *queue[RX_QUEUE_SIZE]; - u32 processed; - u32 read; - u32 write; - u32 free_count; - struct list_head rx_free; - struct list_head rx_used; - int need_update; - spinlock_t lock; -}; - -#define IWL_SUPPORTED_RATES_IE_LEN 8 - -#define SCAN_INTERVAL 100 - -#define MAX_A_CHANNELS 252 -#define MIN_A_CHANNELS 7 - -#define MAX_B_CHANNELS 14 -#define MIN_B_CHANNELS 1 - -#define MAX_TID_COUNT 9 - -#define IWL_INVALID_RATE 0xFF -#define IWL_INVALID_VALUE -1 - -#ifdef CONFIG_IWL4965_HT -/** - * struct iwl4965_ht_agg -- aggregation status while waiting for block-ack - * @txq_id: Tx queue used for Tx attempt - * @frame_count: # frames attempted by Tx command - * @wait_for_ba: Expect block-ack before next Tx reply - * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window - * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window - * @bitmap1: High order, one bit for each frame pending ACK in Tx window - * @rate_n_flags: Rate at which Tx was attempted - * - * If REPLY_TX indicates that aggregation was attempted, driver must wait - * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info - * until block ack arrives. - */ -struct iwl4965_ht_agg { - u16 txq_id; - u16 frame_count; - u16 wait_for_ba; - u16 start_idx; - u64 bitmap; - u32 rate_n_flags; -#define IWL_AGG_OFF 0 -#define IWL_AGG_ON 1 -#define IWL_EMPTYING_HW_QUEUE_ADDBA 2 -#define IWL_EMPTYING_HW_QUEUE_DELBA 3 - u8 state; -}; - -#endif /* CONFIG_IWL4965_HT */ - -struct iwl4965_tid_data { - u16 seq_number; - u16 tfds_in_queue; -#ifdef CONFIG_IWL4965_HT - struct iwl4965_ht_agg agg; -#endif /* CONFIG_IWL4965_HT */ -}; - -struct iwl4965_hw_key { - enum ieee80211_key_alg alg; - int keylen; - u8 keyidx; - struct ieee80211_key_conf *conf; - u8 key[32]; -}; - -union iwl4965_ht_rate_supp { - u16 rates; - struct { - u8 siso_rate; - u8 mimo_rate; - }; -}; - -#ifdef CONFIG_IWL4965_HT -#define CFG_HT_RX_AMPDU_FACTOR_DEF (0x3) -#define CFG_HT_MPDU_DENSITY_2USEC (0x5) -#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_2USEC - -struct iwl_ht_info { - /* self configuration data */ - u8 is_ht; - u8 supported_chan_width; - u16 tx_mimo_ps_mode; - u8 is_green_field; - u8 sgf; /* HT_SHORT_GI_* short guard interval */ - u8 max_amsdu_size; - u8 ampdu_factor; - u8 mpdu_density; - u8 supp_mcs_set[16]; - /* BSS related data */ - u8 control_channel; - u8 extension_chan_offset; - u8 tx_chan_width; - u8 ht_protection; - u8 non_GF_STA_present; -}; -#endif /*CONFIG_IWL4965_HT */ - -union iwl4965_qos_capabity { - struct { - u8 edca_count:4; /* bit 0-3 */ - u8 q_ack:1; /* bit 4 */ - u8 queue_request:1; /* bit 5 */ - u8 txop_request:1; /* bit 6 */ - u8 reserved:1; /* bit 7 */ - } q_AP; - struct { - u8 acvo_APSD:1; /* bit 0 */ - u8 acvi_APSD:1; /* bit 1 */ - u8 ac_bk_APSD:1; /* bit 2 */ - u8 ac_be_APSD:1; /* bit 3 */ - u8 q_ack:1; /* bit 4 */ - u8 max_len:2; /* bit 5-6 */ - u8 more_data_ack:1; /* bit 7 */ - } q_STA; - u8 val; -}; - -/* QoS structures */ -struct iwl4965_qos_info { - int qos_enable; - int qos_active; - union iwl4965_qos_capabity qos_cap; - struct iwl4965_qosparam_cmd def_qos_parm; -}; - -#define STA_PS_STATUS_WAKE 0 -#define STA_PS_STATUS_SLEEP 1 - -struct iwl4965_station_entry { - struct iwl4965_addsta_cmd sta; - struct iwl4965_tid_data tid[MAX_TID_COUNT]; - u8 used; - u8 ps_status; - struct iwl4965_hw_key keyinfo; -}; - -/* one for each uCode image (inst/data, boot/init/runtime) */ -struct fw_desc { - void *v_addr; /* access by driver */ - dma_addr_t p_addr; /* access by card's busmaster DMA */ - u32 len; /* bytes */ -}; - -/* uCode file layout */ -struct iwl4965_ucode { - __le32 ver; /* major/minor/subminor */ - __le32 inst_size; /* bytes of runtime instructions */ - __le32 data_size; /* bytes of runtime data */ - __le32 init_size; /* bytes of initialization instructions */ - __le32 init_data_size; /* bytes of initialization data */ - __le32 boot_size; /* bytes of bootstrap instructions */ - u8 data[0]; /* data in same order as "size" elements */ -}; - -#define IWL_IBSS_MAC_HASH_SIZE 32 - -struct iwl4965_ibss_seq { - u8 mac[ETH_ALEN]; - u16 seq_num; - u16 frag_num; - unsigned long packet_time; - struct list_head list; -}; - -/** - * struct iwl_hw_params - * @max_txq_num: Max # Tx queues supported - * @tx_cmd_len: Size of Tx command (but not including frame itself) - * @tx_ant_num: Number of TX antennas - * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) - * @rx_buffer_size: - * @max_rxq_log: Log-base-2 of max_rxq_size - * @max_stations: - * @bcast_sta_id: - */ -struct iwl_hw_params { - u16 max_txq_num; - u16 tx_cmd_len; - u8 tx_chains_num; - u8 rx_chains_num; - u8 valid_tx_ant; - u8 valid_rx_ant; - u16 max_rxq_size; - u16 max_rxq_log; - u32 rx_buf_size; - u32 max_pkt_size; - u8 max_stations; - u8 bcast_sta_id; -}; - -#define HT_SHORT_GI_20MHZ_ONLY (1 << 0) -#define HT_SHORT_GI_40MHZ_ONLY (1 << 1) - - -#define IWL_RX_HDR(x) ((struct iwl4965_rx_frame_hdr *)(\ - x->u.rx_frame.stats.payload + \ - x->u.rx_frame.stats.phy_count)) -#define IWL_RX_END(x) ((struct iwl4965_rx_frame_end *)(\ - IWL_RX_HDR(x)->payload + \ - le16_to_cpu(IWL_RX_HDR(x)->len))) -#define IWL_RX_STATS(x) (&x->u.rx_frame.stats) -#define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload) - - -/****************************************************************************** - * - * Functions implemented in iwl-base.c which are forward declared here - * for use by iwl-*.c - * - *****************************************************************************/ -struct iwl4965_addsta_cmd; -extern int iwl4965_send_add_station(struct iwl_priv *priv, - struct iwl4965_addsta_cmd *sta, u8 flags); -extern u8 iwl4965_add_station_flags(struct iwl_priv *priv, const u8 *addr, - int is_ap, u8 flags, void *ht_data); -extern int iwl4965_is_network_packet(struct iwl_priv *priv, - struct ieee80211_hdr *header); -extern int iwl4965_power_init_handle(struct iwl_priv *priv); -extern void iwl4965_handle_data_packet_monitor(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb, - void *data, short len, - struct ieee80211_rx_status *stats, - u16 phy_flags); -extern int iwl4965_is_duplicate_packet(struct iwl_priv *priv, - struct ieee80211_hdr *header); -extern int iwl4965_rx_queue_alloc(struct iwl_priv *priv); -extern void iwl4965_rx_queue_reset(struct iwl_priv *priv, - struct iwl4965_rx_queue *rxq); -extern int iwl4965_calc_db_from_ratio(int sig_ratio); -extern int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm); -extern int iwl4965_tx_queue_init(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq, int count, u32 id); -extern void iwl4965_rx_replenish(void *data); -extern void iwl4965_tx_queue_free(struct iwl_priv *priv, struct iwl4965_tx_queue *txq); -extern unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - const u8 *dest, int left); -extern int iwl4965_rx_queue_update_write_ptr(struct iwl_priv *priv, - struct iwl4965_rx_queue *q); -extern void iwl4965_set_decrypted_flag(struct iwl_priv *priv, struct sk_buff *skb, - u32 decrypt_res, - struct ieee80211_rx_status *stats); -extern __le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr); -int iwl4965_init_geos(struct iwl_priv *priv); -void iwl4965_free_geos(struct iwl_priv *priv); - -extern const u8 iwl4965_broadcast_addr[ETH_ALEN]; -int iwl4965_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd); - -/* - * Currently used by iwl-3945-rs... look at restructuring so that it doesn't - * call this... todo... fix that. -*/ -extern u8 iwl4965_sync_station(struct iwl_priv *priv, int sta_id, - u16 tx_rate, u8 flags); - -/****************************************************************************** - * - * Functions implemented in iwl-[34]*.c which are forward declared here - * for use by iwl-base.c - * - * NOTE: The implementation of these functions are hardware specific - * which is why they are in the hardware specific files (vs. iwl-base.c) - * - * Naming convention -- - * iwl4965_ <-- Its part of iwlwifi (should be changed to iwl4965_) - * iwl4965_hw_ <-- Hardware specific (implemented in iwl-XXXX.c by all HW) - * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) - * iwl4965_bg_ <-- Called from work queue context - * iwl4965_mac_ <-- mac80211 callback - * - ****************************************************************************/ -extern void iwl4965_hw_rx_handler_setup(struct iwl_priv *priv); -extern void iwl4965_hw_setup_deferred_work(struct iwl_priv *priv); -extern void iwl4965_hw_cancel_deferred_work(struct iwl_priv *priv); -extern int iwl4965_hw_rxq_stop(struct iwl_priv *priv); -extern int iwl4965_hw_set_hw_params(struct iwl_priv *priv); -extern int iwl4965_hw_nic_init(struct iwl_priv *priv); -extern int iwl4965_hw_nic_stop_master(struct iwl_priv *priv); -extern void iwl4965_hw_txq_ctx_free(struct iwl_priv *priv); -extern void iwl4965_hw_txq_ctx_stop(struct iwl_priv *priv); -extern int iwl4965_hw_nic_reset(struct iwl_priv *priv); -extern int iwl4965_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *tfd, - dma_addr_t addr, u16 len); -extern int iwl4965_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl4965_tx_queue *txq); -extern int iwl4965_hw_get_temperature(struct iwl_priv *priv); -extern int iwl4965_hw_tx_queue_init(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq); -extern unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, - struct iwl4965_frame *frame, u8 rate); -extern int iwl4965_hw_get_rx_read(struct iwl_priv *priv); -extern void iwl4965_hw_build_tx_cmd_rate(struct iwl_priv *priv, - struct iwl_cmd *cmd, - struct ieee80211_tx_control *ctrl, - struct ieee80211_hdr *hdr, - int sta_id, int tx_id); -extern int iwl4965_hw_reg_send_txpower(struct iwl_priv *priv); -extern int iwl4965_hw_reg_set_txpower(struct iwl_priv *priv, s8 power); -extern void iwl4965_hw_rx_statistics(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb); -extern void iwl4965_disable_events(struct iwl_priv *priv); -extern int iwl4965_get_temperature(const struct iwl_priv *priv); - -/** - * iwl4965_hw_find_station - Find station id for a given BSSID - * @bssid: MAC address of station ID to find - * - * NOTE: This should not be hardware specific but the code has - * not yet been merged into a single common layer for managing the - * station tables. - */ -extern u8 iwl4965_hw_find_station(struct iwl_priv *priv, const u8 *bssid); - -extern int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel); -extern int iwl4965_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index); -extern int iwl4965_queue_space(const struct iwl4965_queue *q); -struct iwl_priv; - -extern void iwl4965_radio_kill_sw(struct iwl_priv *priv, int disable_radio); -/* - * Forward declare iwl-4965.c functions for iwl-base.c - */ -extern int iwl4965_tx_queue_update_wr_ptr(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq, - u16 byte_cnt); -extern void iwl4965_add_station(struct iwl_priv *priv, const u8 *addr, - int is_ap); -extern void iwl4965_set_rxon_chain(struct iwl_priv *priv); -extern int iwl4965_alive_notify(struct iwl_priv *priv); -extern void iwl4965_update_rate_scaling(struct iwl_priv *priv, u8 mode); -extern void iwl4965_chain_noise_reset(struct iwl_priv *priv); -extern void iwl4965_init_sensitivity(struct iwl_priv *priv, u8 flags, - u8 force); -extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv); -extern void iwl4965_hwrate_to_tx_control(struct iwl_priv *priv, - u32 rate_n_flags, - struct ieee80211_tx_control *control); - -#ifdef CONFIG_IWL4965_HT -void iwl4965_init_ht_hw_capab(struct iwl_priv *priv, - struct ieee80211_ht_info *ht_info, - enum ieee80211_band band); -void iwl4965_set_rxon_ht(struct iwl_priv *priv, - struct iwl_ht_info *ht_info); -void iwl4965_set_ht_add_station(struct iwl_priv *priv, u8 index, - struct ieee80211_ht_info *sta_ht_inf); -int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, - enum ieee80211_ampdu_mlme_action action, - const u8 *addr, u16 tid, u16 *ssn); -int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id, - u8 tid, int txq_id); -#else -static inline void iwl4965_init_ht_hw_capab(struct iwl_priv *priv, - struct ieee80211_ht_info *ht_info, - enum ieee80211_band band) {} - -#endif /*CONFIG_IWL4965_HT */ -/* Structures, enum, and defines specific to the 4965 */ - -#define IWL4965_KW_SIZE 0x1000 /*4k */ - -struct iwl4965_kw { - dma_addr_t dma_addr; - void *v_addr; - size_t size; -}; - -#define IWL_CHANNEL_WIDTH_20MHZ 0 -#define IWL_CHANNEL_WIDTH_40MHZ 1 - -#define IWL_MIMO_PS_STATIC 0 -#define IWL_MIMO_PS_NONE 3 -#define IWL_MIMO_PS_DYNAMIC 1 -#define IWL_MIMO_PS_INVALID 2 - -#define IWL_OPERATION_MODE_AUTO 0 -#define IWL_OPERATION_MODE_HT_ONLY 1 -#define IWL_OPERATION_MODE_MIXED 2 -#define IWL_OPERATION_MODE_20MHZ 3 - -#define IWL_EXT_CHANNEL_OFFSET_NONE 0 -#define IWL_EXT_CHANNEL_OFFSET_ABOVE 1 -#define IWL_EXT_CHANNEL_OFFSET_RESERVE1 2 -#define IWL_EXT_CHANNEL_OFFSET_BELOW 3 - -#define NRG_NUM_PREV_STAT_L 20 -#define NUM_RX_CHAINS (3) - -#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 - -struct iwl4965_lq_mngr { - spinlock_t lock; - s32 max_window_size; - s32 *expected_tpt; - u8 *next_higher_rate; - u8 *next_lower_rate; - unsigned long stamp; - unsigned long stamp_last; - u32 flush_time; - u32 tx_packets; - u8 lq_ready; -}; - -/* Sensitivity and chain noise calibration */ -#define INTERFERENCE_DATA_AVAILABLE __constant_cpu_to_le32(1) -#define INITIALIZATION_VALUE 0xFFFF -#define CAL_NUM_OF_BEACONS 20 -#define MAXIMUM_ALLOWED_PATHLOSS 15 - -#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 - -#define MAX_FA_OFDM 50 -#define MIN_FA_OFDM 5 -#define MAX_FA_CCK 50 -#define MIN_FA_CCK 5 - -#define NRG_MIN_CCK 97 -#define NRG_MAX_CCK 0 - -#define AUTO_CORR_MIN_OFDM 85 -#define AUTO_CORR_MIN_OFDM_MRC 170 -#define AUTO_CORR_MIN_OFDM_X1 105 -#define AUTO_CORR_MIN_OFDM_MRC_X1 220 -#define AUTO_CORR_MAX_OFDM 120 -#define AUTO_CORR_MAX_OFDM_MRC 210 -#define AUTO_CORR_MAX_OFDM_X1 140 -#define AUTO_CORR_MAX_OFDM_MRC_X1 270 -#define AUTO_CORR_STEP_OFDM 1 - -#define AUTO_CORR_MIN_CCK (125) -#define AUTO_CORR_MAX_CCK (200) -#define AUTO_CORR_MIN_CCK_MRC 200 -#define AUTO_CORR_MAX_CCK_MRC 400 -#define AUTO_CORR_STEP_CCK 3 -#define AUTO_CORR_MAX_TH_CCK 160 - -#define NRG_DIFF 2 -#define NRG_STEP_CCK 2 -#define NRG_MARGIN 8 -#define MAX_NUMBER_CCK_NO_FA 100 - -#define AUTO_CORR_CCK_MIN_VAL_DEF (125) - -#define CHAIN_A 0 -#define CHAIN_B 1 -#define CHAIN_C 2 -#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 -#define ALL_BAND_FILTER 0xFF00 -#define IN_BAND_FILTER 0xFF -#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF - -enum iwl4965_false_alarm_state { - IWL_FA_TOO_MANY = 0, - IWL_FA_TOO_FEW = 1, - IWL_FA_GOOD_RANGE = 2, -}; - -enum iwl4965_chain_noise_state { - IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ - IWL_CHAIN_NOISE_ACCUMULATE = 1, - IWL_CHAIN_NOISE_CALIBRATED = 2, -}; - -enum iwl4965_sensitivity_state { - IWL_SENS_CALIB_ALLOWED = 0, - IWL_SENS_CALIB_NEED_REINIT = 1, -}; - -enum iwl4965_calib_enabled_state { - IWL_CALIB_DISABLED = 0, /* must be 0 */ - IWL_CALIB_ENABLED = 1, -}; - -struct statistics_general_data { - u32 beacon_silence_rssi_a; - u32 beacon_silence_rssi_b; - u32 beacon_silence_rssi_c; - u32 beacon_energy_a; - u32 beacon_energy_b; - u32 beacon_energy_c; -}; - -/* Sensitivity calib data */ -struct iwl4965_sensitivity_data { - u32 auto_corr_ofdm; - u32 auto_corr_ofdm_mrc; - u32 auto_corr_ofdm_x1; - u32 auto_corr_ofdm_mrc_x1; - u32 auto_corr_cck; - u32 auto_corr_cck_mrc; - - u32 last_bad_plcp_cnt_ofdm; - u32 last_fa_cnt_ofdm; - u32 last_bad_plcp_cnt_cck; - u32 last_fa_cnt_cck; - - u32 nrg_curr_state; - u32 nrg_prev_state; - u32 nrg_value[10]; - u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; - u32 nrg_silence_ref; - u32 nrg_energy_idx; - u32 nrg_silence_idx; - u32 nrg_th_cck; - s32 nrg_auto_corr_silence_diff; - u32 num_in_cck_no_fa; - u32 nrg_th_ofdm; - - u8 state; -}; - -/* Chain noise (differential Rx gain) calib data */ -struct iwl4965_chain_noise_data { - u8 state; - u16 beacon_count; - u32 chain_noise_a; - u32 chain_noise_b; - u32 chain_noise_c; - u32 chain_signal_a; - u32 chain_signal_b; - u32 chain_signal_c; - u8 disconn_array[NUM_RX_CHAINS]; - u8 delta_gain_code[NUM_RX_CHAINS]; - u8 radio_write; -}; - -#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ -#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ - - -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - -enum { - MEASUREMENT_READY = (1 << 0), - MEASUREMENT_ACTIVE = (1 << 1), -}; - -#endif - -#define IWL_MAX_NUM_QUEUES 20 /* FIXME: do dynamic allocation */ - -struct iwl_priv { - - /* ieee device used by generic ieee processing code */ - struct ieee80211_hw *hw; - struct ieee80211_channel *ieee_channels; - struct ieee80211_rate *ieee_rates; - struct iwl_cfg *cfg; - - /* temporary frame storage list */ - struct list_head free_frames; - int frames_count; - - enum ieee80211_band band; - int alloc_rxb_skb; - bool add_radiotap; - - void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb); - - struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; - -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - /* spectrum measurement report caching */ - struct iwl4965_spectrum_notification measure_report; - u8 measurement_status; -#endif - /* ucode beacon time */ - u32 ucode_beacon_time; - - /* we allocate array of iwl4965_channel_info for NIC's valid channels. - * Access via channel # using indirect index array */ - struct iwl_channel_info *channel_info; /* channel info array */ - u8 channel_count; /* # of channels */ - - /* each calibration channel group in the EEPROM has a derived - * clip setting for each rate. */ - const struct iwl4965_clip_group clip_groups[5]; - - /* thermal calibration */ - s32 temperature; /* degrees Kelvin */ - s32 last_temperature; - - /* Scan related variables */ - unsigned long last_scan_jiffies; - unsigned long next_scan_jiffies; - unsigned long scan_start; - unsigned long scan_pass_start; - unsigned long scan_start_tsf; - int scan_bands; - int one_direct_scan; - u8 direct_ssid_len; - u8 direct_ssid[IW_ESSID_MAX_SIZE]; - struct iwl4965_scan_cmd *scan; - - /* spinlock */ - spinlock_t lock; /* protect general shared data */ - spinlock_t hcmd_lock; /* protect hcmd */ - struct mutex mutex; - - /* basic pci-network driver stuff */ - struct pci_dev *pci_dev; - - /* pci hardware address support */ - void __iomem *hw_base; - - /* uCode images, save to reload in case of failure */ - struct fw_desc ucode_code; /* runtime inst */ - struct fw_desc ucode_data; /* runtime data original */ - struct fw_desc ucode_data_backup; /* runtime data save/restore */ - struct fw_desc ucode_init; /* initialization inst */ - struct fw_desc ucode_init_data; /* initialization data */ - struct fw_desc ucode_boot; /* bootstrap inst */ - - - struct iwl4965_rxon_time_cmd rxon_timing; - - /* We declare this const so it can only be - * changed via explicit cast within the - * routines that actually update the physical - * hardware */ - const struct iwl4965_rxon_cmd active_rxon; - struct iwl4965_rxon_cmd staging_rxon; - - int error_recovering; - struct iwl4965_rxon_cmd recovery_rxon; - - /* 1st responses from initialize and runtime uCode images. - * 4965's initialize alive response contains some calibration data. */ - struct iwl4965_init_alive_resp card_alive_init; - struct iwl4965_alive_resp card_alive; -#ifdef CONFIG_IWLWIFI_RFKILL - struct iwl_rfkill_mngr rfkill_mngr; -#endif - -#ifdef CONFIG_IWLWIFI_LEDS - struct iwl4965_led led[IWL_LED_TRG_MAX]; - unsigned long last_blink_time; - u8 last_blink_rate; - u8 allow_blinking; - u64 led_tpt; -#endif - - u16 active_rate; - u16 active_rate_basic; - - u8 assoc_station_added; - u8 use_ant_b_for_management_frame; /* Tx antenna selection */ - u8 valid_antenna; /* Bit mask of antennas actually connected */ -#ifdef CONFIG_IWL4965_SENSITIVITY - struct iwl4965_sensitivity_data sensitivity_data; - struct iwl4965_chain_noise_data chain_noise_data; - u8 start_calib; - __le16 sensitivity_tbl[HD_TABLE_SIZE]; -#endif /*CONFIG_IWL4965_SENSITIVITY*/ - -#ifdef CONFIG_IWL4965_HT - struct iwl_ht_info current_ht_config; -#endif - u8 last_phy_res[100]; - - /* Rate scaling data */ - struct iwl4965_lq_mngr lq_mngr; - - /* Rate scaling data */ - s8 data_retry_limit; - u8 retry_rate; - - wait_queue_head_t wait_command_queue; - - int activity_timer_active; - - /* Rx and Tx DMA processing queues */ - struct iwl4965_rx_queue rxq; - struct iwl4965_tx_queue txq[IWL_MAX_NUM_QUEUES]; - unsigned long txq_ctx_active_msk; - struct iwl4965_kw kw; /* keep warm address */ - u32 scd_base_addr; /* scheduler sram base address */ - - unsigned long status; - - int last_rx_rssi; /* From Rx packet statisitics */ - int last_rx_noise; /* From beacon statistics */ - - /* counts mgmt, ctl, and data packets */ - struct traffic_stats { - u32 cnt; - u64 bytes; - } tx_stats[3], rx_stats[3]; - - struct iwl4965_power_mgr power_data; - - struct iwl4965_notif_statistics statistics; - unsigned long last_statistics_time; - - /* context information */ - u8 essid[IW_ESSID_MAX_SIZE]; - u8 essid_len; - u16 rates_mask; - - u32 power_mode; - u32 antenna; - u8 bssid[ETH_ALEN]; - u16 rts_threshold; - u8 mac_addr[ETH_ALEN]; - - /*station table variables */ - spinlock_t sta_lock; - int num_stations; - struct iwl4965_station_entry stations[IWL_STATION_COUNT]; - struct iwl_wep_key wep_keys[WEP_KEYS_MAX]; - u8 default_wep_key; - u8 key_mapping_key; - unsigned long ucode_key_table; - - /* Indication if ieee80211_ops->open has been called */ - u8 is_open; - - u8 mac80211_registered; - - u32 notif_missed_beacons; - - /* Rx'd packet timing information */ - u32 last_beacon_time; - u64 last_tsf; - - /* Duplicate packet detection */ - u16 last_seq_num; - u16 last_frag_num; - unsigned long last_packet_time; - - /* Hash table for finding stations in IBSS network */ - struct list_head ibss_mac_hash[IWL_IBSS_MAC_HASH_SIZE]; - - /* eeprom */ - struct iwl4965_eeprom eeprom; - - enum ieee80211_if_types iw_mode; - - struct sk_buff *ibss_beacon; - - /* Last Rx'd beacon timestamp */ - u64 timestamp; - u16 beacon_int; - struct ieee80211_vif *vif; - - struct iwl_hw_params hw_params; - /* driver/uCode shared Tx Byte Counts and Rx status */ - void *shared_virt; - /* Physical Pointer to Tx Byte Counts and Rx status */ - dma_addr_t shared_phys; - - /* Current association information needed to configure the - * hardware */ - u16 assoc_id; - u16 assoc_capability; - u8 ps_mode; - - struct iwl4965_qos_info qos_data; - - struct workqueue_struct *workqueue; - - struct work_struct up; - struct work_struct restart; - struct work_struct calibrated_work; - struct work_struct scan_completed; - struct work_struct rx_replenish; - struct work_struct rf_kill; - struct work_struct abort_scan; - struct work_struct update_link_led; - struct work_struct auth_work; - struct work_struct report_work; - struct work_struct request_scan; - struct work_struct beacon_update; - - struct tasklet_struct irq_tasklet; - - struct work_struct init_alive_start; - struct work_struct alive_start; - struct work_struct activity_timer; - struct work_struct thermal_periodic; - struct work_struct gather_stats; - struct work_struct scan_check; - struct work_struct post_associate; - -#define IWL_DEFAULT_TX_POWER 0x0F - s8 user_txpower_limit; - s8 max_channel_txpower_limit; - -#ifdef CONFIG_PM - u32 pm_state[16]; -#endif - -#ifdef CONFIG_IWLWIFI_DEBUG - /* debugging info */ - u32 framecnt_to_us; - atomic_t restrict_refcnt; -#ifdef CONFIG_IWLWIFI_DEBUGFS - /* debugfs */ - struct iwl_debugfs *dbgfs; -#endif /* CONFIG_IWLWIFI_DEBUGFS */ -#endif /* CONFIG_IWLWIFI_DEBUG */ - - struct work_struct txpower_work; -#ifdef CONFIG_IWL4965_SENSITIVITY - struct work_struct sensitivity_work; -#endif - struct timer_list statistics_periodic; -}; /*iwl_priv */ - -static inline int iwl_is_associated(struct iwl_priv *priv) -{ - return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; -} - -static inline int is_channel_valid(const struct iwl_channel_info *ch_info) -{ - if (ch_info == NULL) - return 0; - return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; -} - -static inline int is_channel_narrow(const struct iwl_channel_info *ch_info) -{ - return (ch_info->flags & EEPROM_CHANNEL_NARROW) ? 1 : 0; -} - -static inline int is_channel_radar(const struct iwl_channel_info *ch_info) -{ - return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; -} - -static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info) -{ - return ch_info->band == IEEE80211_BAND_5GHZ; -} - -static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info) -{ - return ch_info->band == IEEE80211_BAND_2GHZ; -} - -static inline int is_channel_passive(const struct iwl_channel_info *ch) -{ - return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; -} - -static inline int is_channel_ibss(const struct iwl_channel_info *ch) -{ - return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; -} - -extern const struct iwl_channel_info *iwl_get_channel_info( - const struct iwl_priv *priv, enum ieee80211_band band, u16 channel); - -/* Requires full declaration of iwl_priv before including */ - -#endif /* __iwl4965_4965_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h new file mode 100644 index 0000000..c479ee2 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h @@ -0,0 +1,141 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +/* + * Please use this file (iwl-5000-hw.h) only for hardware-related definitions. + * Use iwl-5000-commands.h for uCode API definitions. + */ + +#ifndef __iwl_5000_hw_h__ +#define __iwl_5000_hw_h__ + +#define IWL50_RTC_INST_UPPER_BOUND (0x020000) +#define IWL50_RTC_DATA_UPPER_BOUND (0x80C000) +#define IWL50_RTC_INST_SIZE (IWL50_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND) +#define IWL50_RTC_DATA_SIZE (IWL50_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND) + +/* EERPROM */ +#define IWL_5000_EEPROM_IMG_SIZE 2048 + + +#define IWL50_MAX_WIN_SIZE 64 +#define IWL50_QUEUE_SIZE 256 +#define IWL50_CMD_FIFO_NUM 7 +#define IWL50_NUM_QUEUES 20 +#define IWL50_NUM_AMPDU_QUEUES 10 +#define IWL50_FIRST_AMPDU_QUEUE 10 + +#define IWL_sta_id_POS 12 +#define IWL_sta_id_LEN 4 +#define IWL_sta_id_SYM val + +/* Fixed (non-configurable) rx data from phy */ + +/* Base physical address of iwl5000_shared is provided to SCD_DRAM_BASE_ADDR + * and &iwl5000_shared.val0 is provided to FH_RSCSR_CHNL0_STTS_WPTR_REG */ +struct iwl5000_sched_queue_byte_cnt_tbl { + struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL50_QUEUE_SIZE + + IWL50_MAX_WIN_SIZE]; +} __attribute__ ((packed)); + +struct iwl5000_shared { + struct iwl5000_sched_queue_byte_cnt_tbl + queues_byte_cnt_tbls[IWL50_NUM_QUEUES]; + __le32 rb_closed; + + /* __le32 rb_closed_stts_rb_num:12; */ +#define IWL_rb_closed_stts_rb_num_POS 0 +#define IWL_rb_closed_stts_rb_num_LEN 12 +#define IWL_rb_closed_stts_rb_num_SYM rb_closed + /* __le32 rsrv1:4; */ + /* __le32 rb_closed_stts_rx_frame_num:12; */ +#define IWL_rb_closed_stts_rx_frame_num_POS 16 +#define IWL_rb_closed_stts_rx_frame_num_LEN 12 +#define IWL_rb_closed_stts_rx_frame_num_SYM rb_closed + /* __le32 rsrv2:4; */ + + __le32 frm_finished; + /* __le32 frame_finished_stts_rb_num:12; */ +#define IWL_frame_finished_stts_rb_num_POS 0 +#define IWL_frame_finished_stts_rb_num_LEN 12 +#define IWL_frame_finished_stts_rb_num_SYM frm_finished + /* __le32 rsrv3:4; */ + /* __le32 frame_finished_stts_rx_frame_num:12; */ +#define IWL_frame_finished_stts_rx_frame_num_POS 16 +#define IWL_frame_finished_stts_rx_frame_num_LEN 12 +#define IWL_frame_finished_stts_rx_frame_num_SYM frm_finished + /* __le32 rsrv4:4; */ + + __le32 padding1; /* so that allocation will be aligned to 16B */ + __le32 padding2; +} __attribute__ ((packed)); + +/* calibrations defined for 5000 */ +/* defines the order in which results should be sent to the runtime uCode */ +enum iwl5000_calib { + IWL5000_CALIB_LO, + IWL5000_CALIB_TX_IQ, + IWL5000_CALIB_TX_IQ_PERD, +}; + +#endif /* __iwl_5000_hw_h__ */ + diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c new file mode 100644 index 0000000..c4e451b --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -0,0 +1,1589 @@ +/****************************************************************************** + * + * Copyright(c) 2007-2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <net/mac80211.h> +#include <linux/etherdevice.h> +#include <asm/unaligned.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-io.h" +#include "iwl-sta.h" +#include "iwl-helpers.h" +#include "iwl-5000-hw.h" + +#define IWL5000_UCODE_API "-1" + +static const u16 iwl5000_default_queue_to_tx_fifo[] = { + IWL_TX_FIFO_AC3, + IWL_TX_FIFO_AC2, + IWL_TX_FIFO_AC1, + IWL_TX_FIFO_AC0, + IWL50_CMD_FIFO_NUM, + IWL_TX_FIFO_HCCA_1, + IWL_TX_FIFO_HCCA_2 +}; + +/* FIXME: same implementation as 4965 */ +static int iwl5000_apm_stop_master(struct iwl_priv *priv) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + /* set stop master bit */ + iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); + + ret = iwl_poll_bit(priv, CSR_RESET, + CSR_RESET_REG_FLAG_MASTER_DISABLED, + CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); + if (ret < 0) + goto out; + +out: + spin_unlock_irqrestore(&priv->lock, flags); + IWL_DEBUG_INFO("stop master\n"); + + return ret; +} + + +static int iwl5000_apm_init(struct iwl_priv *priv) +{ + int ret = 0; + + iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + + /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */ + iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); + + /* Set FH wait treshold to maximum (HW error during stress W/A) */ + iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); + + /* enable HAP INTA to move device L1a -> L0s */ + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); + + iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); + + /* set "initialization complete" bit to move adapter + * D0U* --> D0A* state */ + iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + + /* wait for clock stabilization */ + ret = iwl_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (ret < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); + return ret; + } + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + /* enable DMA */ + iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT); + + udelay(20); + + /* disable L1-Active */ + iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, + APMG_PCIDEV_STT_VAL_L1_ACT_DIS); + + iwl_release_nic_access(priv); + + return ret; +} + +/* FIXME: this is indentical to 4965 */ +static void iwl5000_apm_stop(struct iwl_priv *priv) +{ + unsigned long flags; + + iwl5000_apm_stop_master(priv); + + spin_lock_irqsave(&priv->lock, flags); + + iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); + + udelay(10); + + /* clear "init complete" move adapter D0A* --> D0U state */ + iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + + spin_unlock_irqrestore(&priv->lock, flags); +} + + +static int iwl5000_apm_reset(struct iwl_priv *priv) +{ + int ret = 0; + unsigned long flags; + + iwl5000_apm_stop_master(priv); + + spin_lock_irqsave(&priv->lock, flags); + + iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); + + udelay(10); + + + /* FIXME: put here L1A -L0S w/a */ + + iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); + + /* set "initialization complete" bit to move adapter + * D0U* --> D0A* state */ + iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + + /* wait for clock stabilization */ + ret = iwl_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (ret < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); + goto out; + } + + ret = iwl_grab_nic_access(priv); + if (ret) + goto out; + + /* enable DMA */ + iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT); + + udelay(20); + + /* disable L1-Active */ + iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, + APMG_PCIDEV_STT_VAL_L1_ACT_DIS); + + iwl_release_nic_access(priv); + +out: + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + + +static void iwl5000_nic_config(struct iwl_priv *priv) +{ + unsigned long flags; + u16 radio_cfg; + u16 link; + + spin_lock_irqsave(&priv->lock, flags); + + pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link); + + /* L1 is enabled by BIOS */ + if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN) + /* diable L0S disabled L1A enabled */ + iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); + else + /* L0S enabled L1A disabled */ + iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); + + radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); + + /* write radio config values to register */ + if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) < EEPROM_5000_RF_CFG_TYPE_MAX) + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | + EEPROM_RF_CFG_STEP_MSK(radio_cfg) | + EEPROM_RF_CFG_DASH_MSK(radio_cfg)); + + /* set CSR_HW_CONFIG_REG for uCode use */ + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | + CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); + + /* W/A : NIC is stuck in a reset state after Early PCIe power off + * (PCIe power is lost before PERST# is asserted), + * causing ME FW to lose ownership and not being able to obtain it back. + */ + iwl_grab_nic_access(priv); + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, + ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); + iwl_release_nic_access(priv); + + spin_unlock_irqrestore(&priv->lock, flags); +} + + + +/* + * EEPROM + */ +static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address) +{ + u16 offset = 0; + + if ((address & INDIRECT_ADDRESS) == 0) + return address; + + switch (address & INDIRECT_TYPE_MSK) { + case INDIRECT_HOST: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_HOST); + break; + case INDIRECT_GENERAL: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_GENERAL); + break; + case INDIRECT_REGULATORY: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_REGULATORY); + break; + case INDIRECT_CALIBRATION: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_CALIBRATION); + break; + case INDIRECT_PROCESS_ADJST: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_PROCESS_ADJST); + break; + case INDIRECT_OTHERS: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_OTHERS); + break; + default: + IWL_ERROR("illegal indirect type: 0x%X\n", + address & INDIRECT_TYPE_MSK); + break; + } + + /* translate the offset from words to byte */ + return (address & ADDRESS_MSK) + (offset << 1); +} + +static int iwl5000_eeprom_check_version(struct iwl_priv *priv) +{ + u16 eeprom_ver; + struct iwl_eeprom_calib_hdr { + u8 version; + u8 pa_type; + u16 voltage; + } *hdr; + + eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION); + + hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv, + EEPROM_5000_CALIB_ALL); + + if (eeprom_ver < EEPROM_5000_EEPROM_VERSION || + hdr->version < EEPROM_5000_TX_POWER_VERSION) + goto err; + + return 0; +err: + IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n", + eeprom_ver, EEPROM_5000_EEPROM_VERSION, + hdr->version, EEPROM_5000_TX_POWER_VERSION); + return -EINVAL; + +} + +static void iwl5000_gain_computation(struct iwl_priv *priv, + u32 average_noise[NUM_RX_CHAINS], + u16 min_average_noise_antenna_i, + u32 min_average_noise) +{ + int i; + s32 delta_g; + struct iwl_chain_noise_data *data = &priv->chain_noise_data; + + /* Find Gain Code for the antennas B and C */ + for (i = 1; i < NUM_RX_CHAINS; i++) { + if ((data->disconn_array[i])) { + data->delta_gain_code[i] = 0; + continue; + } + delta_g = (1000 * ((s32)average_noise[0] - + (s32)average_noise[i])) / 1500; + /* bound gain by 2 bits value max, 3rd bit is sign */ + data->delta_gain_code[i] = + min(abs(delta_g), CHAIN_NOISE_MAX_DELTA_GAIN_CODE); + + if (delta_g < 0) + /* set negative sign */ + data->delta_gain_code[i] |= (1 << 2); + } + + IWL_DEBUG_CALIB("Delta gains: ANT_B = %d ANT_C = %d\n", + data->delta_gain_code[1], data->delta_gain_code[2]); + + if (!data->radio_write) { + struct iwl5000_calibration_chain_noise_gain_cmd cmd; + memset(&cmd, 0, sizeof(cmd)); + + cmd.op_code = IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD; + cmd.delta_gain_1 = data->delta_gain_code[1]; + cmd.delta_gain_2 = data->delta_gain_code[2]; + iwl_send_cmd_pdu_async(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cmd), &cmd, NULL); + + data->radio_write = 1; + data->state = IWL_CHAIN_NOISE_CALIBRATED; + } + + data->chain_noise_a = 0; + data->chain_noise_b = 0; + data->chain_noise_c = 0; + data->chain_signal_a = 0; + data->chain_signal_b = 0; + data->chain_signal_c = 0; + data->beacon_count = 0; +} + +static void iwl5000_chain_noise_reset(struct iwl_priv *priv) +{ + struct iwl_chain_noise_data *data = &priv->chain_noise_data; + + if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) { + struct iwl5000_calibration_chain_noise_reset_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_code = IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD; + if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cmd), &cmd)) + IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n"); + data->state = IWL_CHAIN_NOISE_ACCUMULATE; + IWL_DEBUG_CALIB("Run chain_noise_calibrate\n"); + } +} + +static void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_control *ctrl, + __le32 *tx_flags) +{ + if ((ctrl->flags & IEEE80211_TXCTL_USE_RTS_CTS) || + (ctrl->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)) + *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK; + else + *tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK; +} + +static struct iwl_sensitivity_ranges iwl5000_sensitivity = { + .min_nrg_cck = 95, + .max_nrg_cck = 0, + .auto_corr_min_ofdm = 90, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 120, + .auto_corr_min_ofdm_mrc_x1 = 240, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + .auto_corr_max_ofdm_x1 = 155, + .auto_corr_max_ofdm_mrc_x1 = 290, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 170, + .auto_corr_max_cck_mrc = 400, + .nrg_th_cck = 95, + .nrg_th_ofdm = 95, +}; + +static const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv, + size_t offset) +{ + u32 address = eeprom_indirect_address(priv, offset); + BUG_ON(address >= priv->cfg->eeprom_size); + return &priv->eeprom[address]; +} + +/* + * Calibration + */ +static int iwl5000_send_Xtal_calib(struct iwl_priv *priv) +{ + u16 *xtal_calib = (u16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL); + + struct iwl5000_calibration cal_cmd = { + .op_code = IWL5000_PHY_CALIBRATE_CRYSTAL_FRQ_CMD, + .data = { + (u8)xtal_calib[0], + (u8)xtal_calib[1], + } + }; + + return iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cal_cmd), &cal_cmd); +} + +static int iwl5000_send_calib_cfg(struct iwl_priv *priv) +{ + struct iwl5000_calib_cfg_cmd calib_cfg_cmd; + struct iwl_host_cmd cmd = { + .id = CALIBRATION_CFG_CMD, + .len = sizeof(struct iwl5000_calib_cfg_cmd), + .data = &calib_cfg_cmd, + }; + + memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); + calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL; + calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL; + calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL; + calib_cfg_cmd.ucd_calib_cfg.flags = IWL_CALIB_INIT_CFG_ALL; + + return iwl_send_cmd(priv, &cmd); +} + +static void iwl5000_rx_calib_result(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (void *)rxb->skb->data; + struct iwl5000_calib_hdr *hdr = (struct iwl5000_calib_hdr *)pkt->u.raw; + int len = le32_to_cpu(pkt->len) & FH_RSCSR_FRAME_SIZE_MSK; + int index; + + /* reduce the size of the length field itself */ + len -= 4; + + /* Define the order in which the results will be sent to the runtime + * uCode. iwl_send_calib_results sends them in a row according to their + * index. We sort them here */ + switch (hdr->op_code) { + case IWL5000_PHY_CALIBRATE_LO_CMD: + index = IWL5000_CALIB_LO; + break; + case IWL5000_PHY_CALIBRATE_TX_IQ_CMD: + index = IWL5000_CALIB_TX_IQ; + break; + case IWL5000_PHY_CALIBRATE_TX_IQ_PERD_CMD: + index = IWL5000_CALIB_TX_IQ_PERD; + break; + default: + IWL_ERROR("Unknown calibration notification %d\n", + hdr->op_code); + return; + } + iwl_calib_set(&priv->calib_results[index], pkt->u.raw, len); +} + +static void iwl5000_rx_calib_complete(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + IWL_DEBUG_INFO("Init. calibration is completed, restarting fw.\n"); + queue_work(priv->workqueue, &priv->restart); +} + +/* + * ucode + */ +static int iwl5000_load_section(struct iwl_priv *priv, + struct fw_desc *image, + u32 dst_addr) +{ + int ret = 0; + unsigned long flags; + + dma_addr_t phy_addr = image->p_addr; + u32 byte_cnt = image->len; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) { + spin_unlock_irqrestore(&priv->lock, flags); + return ret; + } + + iwl_write_direct32(priv, + FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL), + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE); + + iwl_write_direct32(priv, + FH_SRVC_CHNL_SRAM_ADDR_REG(FH_SRVC_CHNL), dst_addr); + + iwl_write_direct32(priv, + FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL), + phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK); + + iwl_write_direct32(priv, + FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL), + (iwl_get_dma_hi_address(phy_addr) + << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt); + + iwl_write_direct32(priv, + FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL), + 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM | + 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX | + FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID); + + iwl_write_direct32(priv, + FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL), + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL | + FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD); + + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + return 0; +} + +static int iwl5000_load_given_ucode(struct iwl_priv *priv, + struct fw_desc *inst_image, + struct fw_desc *data_image) +{ + int ret = 0; + + ret = iwl5000_load_section( + priv, inst_image, RTC_INST_LOWER_BOUND); + if (ret) + return ret; + + IWL_DEBUG_INFO("INST uCode section being loaded...\n"); + ret = wait_event_interruptible_timeout(priv->wait_command_queue, + priv->ucode_write_complete, 5 * HZ); + if (ret == -ERESTARTSYS) { + IWL_ERROR("Could not load the INST uCode section due " + "to interrupt\n"); + return ret; + } + if (!ret) { + IWL_ERROR("Could not load the INST uCode section\n"); + return -ETIMEDOUT; + } + + priv->ucode_write_complete = 0; + + ret = iwl5000_load_section( + priv, data_image, RTC_DATA_LOWER_BOUND); + if (ret) + return ret; + + IWL_DEBUG_INFO("DATA uCode section being loaded...\n"); + + ret = wait_event_interruptible_timeout(priv->wait_command_queue, + priv->ucode_write_complete, 5 * HZ); + if (ret == -ERESTARTSYS) { + IWL_ERROR("Could not load the INST uCode section due " + "to interrupt\n"); + return ret; + } else if (!ret) { + IWL_ERROR("Could not load the DATA uCode section\n"); + return -ETIMEDOUT; + } else + ret = 0; + + priv->ucode_write_complete = 0; + + return ret; +} + +static int iwl5000_load_ucode(struct iwl_priv *priv) +{ + int ret = 0; + + /* check whether init ucode should be loaded, or rather runtime ucode */ + if (priv->ucode_init.len && (priv->ucode_type == UCODE_NONE)) { + IWL_DEBUG_INFO("Init ucode found. Loading init ucode...\n"); + ret = iwl5000_load_given_ucode(priv, + &priv->ucode_init, &priv->ucode_init_data); + if (!ret) { + IWL_DEBUG_INFO("Init ucode load complete.\n"); + priv->ucode_type = UCODE_INIT; + } + } else { + IWL_DEBUG_INFO("Init ucode not found, or already loaded. " + "Loading runtime ucode...\n"); + ret = iwl5000_load_given_ucode(priv, + &priv->ucode_code, &priv->ucode_data); + if (!ret) { + IWL_DEBUG_INFO("Runtime ucode load complete.\n"); + priv->ucode_type = UCODE_RT; + } + } + + return ret; +} + +static void iwl5000_init_alive_start(struct iwl_priv *priv) +{ + int ret = 0; + + /* Check alive response for "valid" sign from uCode */ + if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { + /* We had an error bringing up the hardware, so take it + * all the way back down so we can try again */ + IWL_DEBUG_INFO("Initialize Alive failed.\n"); + goto restart; + } + + /* initialize uCode was loaded... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "initialize" alive if code weren't properly loaded. */ + if (iwl_verify_ucode(priv)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n"); + goto restart; + } + + iwl_clear_stations_table(priv); + ret = priv->cfg->ops->lib->alive_notify(priv); + if (ret) { + IWL_WARNING("Could not complete ALIVE transition: %d\n", ret); + goto restart; + } + + iwl5000_send_calib_cfg(priv); + return; + +restart: + /* real restart (first load init_ucode) */ + queue_work(priv->workqueue, &priv->restart); +} + +static void iwl5000_set_wr_ptrs(struct iwl_priv *priv, + int txq_id, u32 index) +{ + iwl_write_direct32(priv, HBUS_TARG_WRPTR, + (index & 0xff) | (txq_id << 8)); + iwl_write_prph(priv, IWL50_SCD_QUEUE_RDPTR(txq_id), index); +} + +static void iwl5000_tx_queue_set_status(struct iwl_priv *priv, + struct iwl_tx_queue *txq, + int tx_fifo_id, int scd_retry) +{ + int txq_id = txq->q.id; + int active = test_bit(txq_id, &priv->txq_ctx_active_msk)?1:0; + + iwl_write_prph(priv, IWL50_SCD_QUEUE_STATUS_BITS(txq_id), + (active << IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE) | + (tx_fifo_id << IWL50_SCD_QUEUE_STTS_REG_POS_TXF) | + (1 << IWL50_SCD_QUEUE_STTS_REG_POS_WSL) | + IWL50_SCD_QUEUE_STTS_REG_MSK); + + txq->sched_retry = scd_retry; + + IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n", + active ? "Activate" : "Deactivate", + scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); +} + +static int iwl5000_send_wimax_coex(struct iwl_priv *priv) +{ + struct iwl_wimax_coex_cmd coex_cmd; + + memset(&coex_cmd, 0, sizeof(coex_cmd)); + + return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD, + sizeof(coex_cmd), &coex_cmd); +} + +static int iwl5000_alive_notify(struct iwl_priv *priv) +{ + u32 a; + int i = 0; + unsigned long flags; + int ret; + + spin_lock_irqsave(&priv->lock, flags); + + ret = iwl_grab_nic_access(priv); + if (ret) { + spin_unlock_irqrestore(&priv->lock, flags); + return ret; + } + + priv->scd_base_addr = iwl_read_prph(priv, IWL50_SCD_SRAM_BASE_ADDR); + a = priv->scd_base_addr + IWL50_SCD_CONTEXT_DATA_OFFSET; + for (; a < priv->scd_base_addr + IWL50_SCD_TX_STTS_BITMAP_OFFSET; + a += 4) + iwl_write_targ_mem(priv, a, 0); + for (; a < priv->scd_base_addr + IWL50_SCD_TRANSLATE_TBL_OFFSET; + a += 4) + iwl_write_targ_mem(priv, a, 0); + for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4) + iwl_write_targ_mem(priv, a, 0); + + iwl_write_prph(priv, IWL50_SCD_DRAM_BASE_ADDR, + (priv->shared_phys + + offsetof(struct iwl5000_shared, queues_byte_cnt_tbls)) >> 10); + iwl_write_prph(priv, IWL50_SCD_QUEUECHAIN_SEL, + IWL50_SCD_QUEUECHAIN_SEL_ALL( + priv->hw_params.max_txq_num)); + iwl_write_prph(priv, IWL50_SCD_AGGR_SEL, 0); + + /* initiate the queues */ + for (i = 0; i < priv->hw_params.max_txq_num; i++) { + iwl_write_prph(priv, IWL50_SCD_QUEUE_RDPTR(i), 0); + iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8)); + iwl_write_targ_mem(priv, priv->scd_base_addr + + IWL50_SCD_CONTEXT_QUEUE_OFFSET(i), 0); + iwl_write_targ_mem(priv, priv->scd_base_addr + + IWL50_SCD_CONTEXT_QUEUE_OFFSET(i) + + sizeof(u32), + ((SCD_WIN_SIZE << + IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) & + IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) | + ((SCD_FRAME_LIMIT << + IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & + IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK)); + } + + iwl_write_prph(priv, IWL50_SCD_INTERRUPT_MASK, + IWL_MASK(0, priv->hw_params.max_txq_num)); + + /* Activate all Tx DMA/FIFO channels */ + priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 7)); + + iwl5000_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0); + /* map qos queues to fifos one-to-one */ + for (i = 0; i < ARRAY_SIZE(iwl5000_default_queue_to_tx_fifo); i++) { + int ac = iwl5000_default_queue_to_tx_fifo[i]; + iwl_txq_ctx_activate(priv, i); + iwl5000_tx_queue_set_status(priv, &priv->txq[i], ac, 0); + } + /* TODO - need to initialize those FIFOs inside the loop above, + * not only mark them as active */ + iwl_txq_ctx_activate(priv, 4); + iwl_txq_ctx_activate(priv, 7); + iwl_txq_ctx_activate(priv, 8); + iwl_txq_ctx_activate(priv, 9); + + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + + iwl5000_send_wimax_coex(priv); + + iwl5000_send_Xtal_calib(priv); + + if (priv->ucode_type == UCODE_RT) + iwl_send_calib_results(priv); + + return 0; +} + +static int iwl5000_hw_set_hw_params(struct iwl_priv *priv) +{ + if ((priv->cfg->mod_params->num_of_queues > IWL50_NUM_QUEUES) || + (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) { + IWL_ERROR("invalid queues_num, should be between %d and %d\n", + IWL_MIN_NUM_QUEUES, IWL50_NUM_QUEUES); + return -EINVAL; + } + + priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues; + priv->hw_params.first_ampdu_q = IWL50_FIRST_AMPDU_QUEUE; + priv->hw_params.max_stations = IWL5000_STATION_COUNT; + priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID; + priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE; + priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE; + priv->hw_params.max_bsm_size = 0; + priv->hw_params.fat_channel = BIT(IEEE80211_BAND_2GHZ) | + BIT(IEEE80211_BAND_5GHZ); + priv->hw_params.sens = &iwl5000_sensitivity; + + switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { + case CSR_HW_REV_TYPE_5100: + case CSR_HW_REV_TYPE_5150: + priv->hw_params.tx_chains_num = 1; + priv->hw_params.rx_chains_num = 2; + /* FIXME: move to ANT_A, ANT_B, ANT_C enum */ + priv->hw_params.valid_tx_ant = ANT_A; + priv->hw_params.valid_rx_ant = ANT_AB; + break; + case CSR_HW_REV_TYPE_5300: + case CSR_HW_REV_TYPE_5350: + priv->hw_params.tx_chains_num = 3; + priv->hw_params.rx_chains_num = 3; + priv->hw_params.valid_tx_ant = ANT_ABC; + priv->hw_params.valid_rx_ant = ANT_ABC; + break; + } + + switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { + case CSR_HW_REV_TYPE_5100: + case CSR_HW_REV_TYPE_5300: + /* 5X00 wants in Celsius */ + priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD; + break; + case CSR_HW_REV_TYPE_5150: + case CSR_HW_REV_TYPE_5350: + /* 5X50 wants in Kelvin */ + priv->hw_params.ct_kill_threshold = + CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD); + break; + } + + return 0; +} + +static int iwl5000_alloc_shared_mem(struct iwl_priv *priv) +{ + priv->shared_virt = pci_alloc_consistent(priv->pci_dev, + sizeof(struct iwl5000_shared), + &priv->shared_phys); + if (!priv->shared_virt) + return -ENOMEM; + + memset(priv->shared_virt, 0, sizeof(struct iwl5000_shared)); + + priv->rb_closed_offset = offsetof(struct iwl5000_shared, rb_closed); + + return 0; +} + +static void iwl5000_free_shared_mem(struct iwl_priv *priv) +{ + if (priv->shared_virt) + pci_free_consistent(priv->pci_dev, + sizeof(struct iwl5000_shared), + priv->shared_virt, + priv->shared_phys); +} + +static int iwl5000_shared_mem_rx_idx(struct iwl_priv *priv) +{ + struct iwl5000_shared *s = priv->shared_virt; + return le32_to_cpu(s->rb_closed) & 0xFFF; +} + +/** + * iwl5000_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array + */ +static void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv, + struct iwl_tx_queue *txq, + u16 byte_cnt) +{ + struct iwl5000_shared *shared_data = priv->shared_virt; + int txq_id = txq->q.id; + u8 sec_ctl = 0; + u8 sta = 0; + int len; + + len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE; + + if (txq_id != IWL_CMD_QUEUE_NUM) { + sta = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id; + sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl; + + switch (sec_ctl & TX_CMD_SEC_MSK) { + case TX_CMD_SEC_CCM: + len += CCMP_MIC_LEN; + break; + case TX_CMD_SEC_TKIP: + len += TKIP_ICV_LEN; + break; + case TX_CMD_SEC_WEP: + len += WEP_IV_LEN + WEP_ICV_LEN; + break; + } + } + + IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. + tfd_offset[txq->q.write_ptr], byte_cnt, len); + + IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. + tfd_offset[txq->q.write_ptr], sta_id, sta); + + if (txq->q.write_ptr < IWL50_MAX_WIN_SIZE) { + IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. + tfd_offset[IWL50_QUEUE_SIZE + txq->q.write_ptr], + byte_cnt, len); + IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. + tfd_offset[IWL50_QUEUE_SIZE + txq->q.write_ptr], + sta_id, sta); + } +} + +static void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv, + struct iwl_tx_queue *txq) +{ + int txq_id = txq->q.id; + struct iwl5000_shared *shared_data = priv->shared_virt; + u8 sta = 0; + + if (txq_id != IWL_CMD_QUEUE_NUM) + sta = txq->cmd[txq->q.read_ptr]->cmd.tx.sta_id; + + shared_data->queues_byte_cnt_tbls[txq_id].tfd_offset[txq->q.read_ptr]. + val = cpu_to_le16(1 | (sta << 12)); + + if (txq->q.write_ptr < IWL50_MAX_WIN_SIZE) { + shared_data->queues_byte_cnt_tbls[txq_id]. + tfd_offset[IWL50_QUEUE_SIZE + txq->q.read_ptr]. + val = cpu_to_le16(1 | (sta << 12)); + } +} + +static int iwl5000_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid, + u16 txq_id) +{ + u32 tbl_dw_addr; + u32 tbl_dw; + u16 scd_q2ratid; + + scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK; + + tbl_dw_addr = priv->scd_base_addr + + IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); + + tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr); + + if (txq_id & 0x1) + tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); + else + tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); + + iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw); + + return 0; +} +static void iwl5000_tx_queue_stop_scheduler(struct iwl_priv *priv, u16 txq_id) +{ + /* Simply stop the queue, but don't change any configuration; + * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ + iwl_write_prph(priv, + IWL50_SCD_QUEUE_STATUS_BITS(txq_id), + (0 << IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE)| + (1 << IWL50_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); +} + +static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id, + int tx_fifo, int sta_id, int tid, u16 ssn_idx) +{ + unsigned long flags; + int ret; + u16 ra_tid; + + if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) || + (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) { + IWL_WARNING("queue number out of range: %d, must be %d to %d\n", + txq_id, IWL50_FIRST_AMPDU_QUEUE, + IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1); + return -EINVAL; + } + + ra_tid = BUILD_RAxTID(sta_id, tid); + + /* Modify device's station table to Tx this TID */ + iwl_sta_modify_enable_tid_tx(priv, sta_id, tid); + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) { + spin_unlock_irqrestore(&priv->lock, flags); + return ret; + } + + /* Stop this Tx queue before configuring it */ + iwl5000_tx_queue_stop_scheduler(priv, txq_id); + + /* Map receiver-address / traffic-ID to this queue */ + iwl5000_tx_queue_set_q2ratid(priv, ra_tid, txq_id); + + /* Set this queue as a chain-building queue */ + iwl_set_bits_prph(priv, IWL50_SCD_QUEUECHAIN_SEL, (1<<txq_id)); + + /* enable aggregations for the queue */ + iwl_set_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1<<txq_id)); + + /* Place first TFD at index corresponding to start sequence number. + * Assumes that ssn_idx is valid (!= 0xFFF) */ + priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); + priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); + iwl5000_set_wr_ptrs(priv, txq_id, ssn_idx); + + /* Set up Tx window size and frame limit for this queue */ + iwl_write_targ_mem(priv, priv->scd_base_addr + + IWL50_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + + sizeof(u32), + ((SCD_WIN_SIZE << + IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) & + IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) | + ((SCD_FRAME_LIMIT << + IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & + IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK)); + + iwl_set_bits_prph(priv, IWL50_SCD_INTERRUPT_MASK, (1 << txq_id)); + + /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */ + iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1); + + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id, + u16 ssn_idx, u8 tx_fifo) +{ + int ret; + + if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) || + (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) { + IWL_WARNING("queue number out of range: %d, must be %d to %d\n", + txq_id, IWL50_FIRST_AMPDU_QUEUE, + IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1); + return -EINVAL; + } + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + iwl5000_tx_queue_stop_scheduler(priv, txq_id); + + iwl_clear_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1 << txq_id)); + + priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); + priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); + /* supposes that ssn_idx is valid (!= 0xFFF) */ + iwl5000_set_wr_ptrs(priv, txq_id, ssn_idx); + + iwl_clear_bits_prph(priv, IWL50_SCD_INTERRUPT_MASK, (1 << txq_id)); + iwl_txq_ctx_deactivate(priv, txq_id); + iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0); + + iwl_release_nic_access(priv); + + return 0; +} + +static u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data) +{ + u16 size = (u16)sizeof(struct iwl_addsta_cmd); + memcpy(data, cmd, size); + return size; +} + + +/* + * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask + * must be called under priv->lock and mac access + */ +static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask) +{ + iwl_write_prph(priv, IWL50_SCD_TXFACT, mask); +} + + +static inline u32 iwl5000_get_scd_ssn(struct iwl5000_tx_resp *tx_resp) +{ + return le32_to_cpup((__le32 *)&tx_resp->status + + tx_resp->frame_count) & MAX_SN; +} + +static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv, + struct iwl_ht_agg *agg, + struct iwl5000_tx_resp *tx_resp, + int txq_id, u16 start_idx) +{ + u16 status; + struct agg_tx_status *frame_status = &tx_resp->status; + struct ieee80211_tx_status *tx_status = NULL; + struct ieee80211_hdr *hdr = NULL; + u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); + int i, sh, idx; + u16 seq; + + if (agg->wait_for_ba) + IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n"); + + agg->frame_count = tx_resp->frame_count; + agg->start_idx = start_idx; + agg->rate_n_flags = rate_n_flags; + agg->bitmap = 0; + + /* # frames attempted by Tx command */ + if (agg->frame_count == 1) { + /* Only one frame was attempted; no block-ack will arrive */ + status = le16_to_cpu(frame_status[0].status); + idx = start_idx; + + /* FIXME: code repetition */ + IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n", + agg->frame_count, agg->start_idx, idx); + + tx_status = &(priv->txq[txq_id].txb[idx].status); + tx_status->retry_count = tx_resp->failure_frame; + tx_status->control.flags &= ~IEEE80211_TXCTL_AMPDU; + tx_status->flags |= iwl_is_tx_success(status)? + IEEE80211_TX_STATUS_ACK : 0; + iwl_hwrate_to_tx_control(priv, rate_n_flags, &tx_status->control); + + /* FIXME: code repetition end */ + + IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n", + status & 0xff, tx_resp->failure_frame); + IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags); + + agg->wait_for_ba = 0; + } else { + /* Two or more frames were attempted; expect block-ack */ + u64 bitmap = 0; + int start = agg->start_idx; + + /* Construct bit-map of pending frames within Tx window */ + for (i = 0; i < agg->frame_count; i++) { + u16 sc; + status = le16_to_cpu(frame_status[i].status); + seq = le16_to_cpu(frame_status[i].sequence); + idx = SEQ_TO_INDEX(seq); + txq_id = SEQ_TO_QUEUE(seq); + + if (status & (AGG_TX_STATE_FEW_BYTES_MSK | + AGG_TX_STATE_ABORT_MSK)) + continue; + + IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n", + agg->frame_count, txq_id, idx); + + hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx); + + sc = le16_to_cpu(hdr->seq_ctrl); + if (idx != (SEQ_TO_SN(sc) & 0xff)) { + IWL_ERROR("BUG_ON idx doesn't match seq control" + " idx=%d, seq_idx=%d, seq=%d\n", + idx, SEQ_TO_SN(sc), + hdr->seq_ctrl); + return -1; + } + + IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", + i, idx, SEQ_TO_SN(sc)); + + sh = idx - start; + if (sh > 64) { + sh = (start - idx) + 0xff; + bitmap = bitmap << sh; + sh = 0; + start = idx; + } else if (sh < -64) + sh = 0xff - (start - idx); + else if (sh < 0) { + sh = start - idx; + start = idx; + bitmap = bitmap << sh; + sh = 0; + } + bitmap |= 1ULL << sh; + IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n", + start, (unsigned long long)bitmap); + } + + agg->bitmap = bitmap; + agg->start_idx = start; + IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n", + agg->frame_count, agg->start_idx, + (unsigned long long)agg->bitmap); + + if (bitmap) + agg->wait_for_ba = 1; + } + return 0; +} + +static void iwl5000_rx_reply_tx(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + int txq_id = SEQ_TO_QUEUE(sequence); + int index = SEQ_TO_INDEX(sequence); + struct iwl_tx_queue *txq = &priv->txq[txq_id]; + struct ieee80211_tx_status *tx_status; + struct iwl5000_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; + u32 status = le16_to_cpu(tx_resp->status.status); + int tid = MAX_TID_COUNT, sta_id = IWL_INVALID_STATION; + struct ieee80211_hdr *hdr; + u8 *qc = NULL; + + if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) { + IWL_ERROR("Read index for DMA queue txq_id (%d) index %d " + "is out of range [0-%d] %d %d\n", txq_id, + index, txq->q.n_bd, txq->q.write_ptr, + txq->q.read_ptr); + return; + } + + tx_status = &(txq->txb[txq->q.read_ptr].status); + + hdr = iwl_tx_queue_get_hdr(priv, txq_id, index); + if (ieee80211_is_data_qos(hdr->frame_control)) { + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; + } + + sta_id = iwl_get_ra_sta_id(priv, hdr); + if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) { + IWL_ERROR("Station not known\n"); + return; + } + + if (txq->sched_retry) { + const u32 scd_ssn = iwl5000_get_scd_ssn(tx_resp); + struct iwl_ht_agg *agg = NULL; + + if (!qc) + return; + + agg = &priv->stations[sta_id].tid[tid].agg; + + iwl5000_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); + + /* check if BAR is needed */ + if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status)) + tx_status->flags |= IEEE80211_TX_STATUS_AMPDU_NO_BACK; + + if (txq->q.read_ptr != (scd_ssn & 0xff)) { + int freed, ampdu_q; + index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); + IWL_DEBUG_TX_REPLY("Retry scheduler reclaim scd_ssn " + "%d index %d\n", scd_ssn , index); + freed = iwl_tx_queue_reclaim(priv, txq_id, index); + priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + + if (iwl_queue_space(&txq->q) > txq->q.low_mark && + txq_id >= 0 && priv->mac80211_registered && + agg->state != IWL_EMPTYING_HW_QUEUE_DELBA) { + /* calculate mac80211 ampdu sw queue to wake */ + ampdu_q = txq_id - IWL50_FIRST_AMPDU_QUEUE + + priv->hw->queues; + if (agg->state == IWL_AGG_OFF) + ieee80211_wake_queue(priv->hw, txq_id); + else + ieee80211_wake_queue(priv->hw, ampdu_q); + } + iwl_txq_check_empty(priv, sta_id, tid, txq_id); + } + } else { + tx_status->retry_count = tx_resp->failure_frame; + tx_status->flags = + iwl_is_tx_success(status) ? IEEE80211_TX_STATUS_ACK : 0; + iwl_hwrate_to_tx_control(priv, + le32_to_cpu(tx_resp->rate_n_flags), + &tx_status->control); + + IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) rate_n_flags " + "0x%x retries %d\n", txq_id, + iwl_get_tx_fail_reason(status), + status, le32_to_cpu(tx_resp->rate_n_flags), + tx_resp->failure_frame); + + IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index); + if (index != -1) { + int freed = iwl_tx_queue_reclaim(priv, txq_id, index); + if (tid != MAX_TID_COUNT) + priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + if (iwl_queue_space(&txq->q) > txq->q.low_mark && + (txq_id >= 0) && priv->mac80211_registered) + ieee80211_wake_queue(priv->hw, txq_id); + if (tid != MAX_TID_COUNT) + iwl_txq_check_empty(priv, sta_id, tid, txq_id); + } + } + + if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK)) + IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n"); +} + +/* Currently 5000 is the supperset of everything */ +static u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len) +{ + return len; +} + +static void iwl5000_setup_deferred_work(struct iwl_priv *priv) +{ + /* in 5000 the tx power calibration is done in uCode */ + priv->disable_tx_power_cal = 1; +} + +static void iwl5000_rx_handler_setup(struct iwl_priv *priv) +{ + /* init calibration handlers */ + priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] = + iwl5000_rx_calib_result; + priv->rx_handlers[CALIBRATION_COMPLETE_NOTIFICATION] = + iwl5000_rx_calib_complete; + priv->rx_handlers[REPLY_TX] = iwl5000_rx_reply_tx; +} + + +static int iwl5000_hw_valid_rtc_data_addr(u32 addr) +{ + return (addr >= RTC_DATA_LOWER_BOUND) && + (addr < IWL50_RTC_DATA_UPPER_BOUND); +} + +static int iwl5000_send_rxon_assoc(struct iwl_priv *priv) +{ + int ret = 0; + struct iwl5000_rxon_assoc_cmd rxon_assoc; + const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon; + const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon; + + if ((rxon1->flags == rxon2->flags) && + (rxon1->filter_flags == rxon2->filter_flags) && + (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && + (rxon1->ofdm_ht_single_stream_basic_rates == + rxon2->ofdm_ht_single_stream_basic_rates) && + (rxon1->ofdm_ht_dual_stream_basic_rates == + rxon2->ofdm_ht_dual_stream_basic_rates) && + (rxon1->ofdm_ht_triple_stream_basic_rates == + rxon2->ofdm_ht_triple_stream_basic_rates) && + (rxon1->acquisition_data == rxon2->acquisition_data) && + (rxon1->rx_chain == rxon2->rx_chain) && + (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { + IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n"); + return 0; + } + + rxon_assoc.flags = priv->staging_rxon.flags; + rxon_assoc.filter_flags = priv->staging_rxon.filter_flags; + rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates; + rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates; + rxon_assoc.reserved1 = 0; + rxon_assoc.reserved2 = 0; + rxon_assoc.reserved3 = 0; + rxon_assoc.ofdm_ht_single_stream_basic_rates = + priv->staging_rxon.ofdm_ht_single_stream_basic_rates; + rxon_assoc.ofdm_ht_dual_stream_basic_rates = + priv->staging_rxon.ofdm_ht_dual_stream_basic_rates; + rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain; + rxon_assoc.ofdm_ht_triple_stream_basic_rates = + priv->staging_rxon.ofdm_ht_triple_stream_basic_rates; + rxon_assoc.acquisition_data = priv->staging_rxon.acquisition_data; + + ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC, + sizeof(rxon_assoc), &rxon_assoc, NULL); + if (ret) + return ret; + + return ret; +} +static int iwl5000_send_tx_power(struct iwl_priv *priv) +{ + struct iwl5000_tx_power_dbm_cmd tx_power_cmd; + + /* half dBm need to multiply */ + tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt); + tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED; + tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO; + return iwl_send_cmd_pdu_async(priv, REPLY_TX_POWER_DBM_CMD, + sizeof(tx_power_cmd), &tx_power_cmd, + NULL); +} + +static void iwl5000_temperature(struct iwl_priv *priv) +{ + /* store temperature from statistics (in Celsius) */ + priv->temperature = le32_to_cpu(priv->statistics.general.temperature); +} + +/* Calc max signal level (dBm) among 3 possible receivers */ +static int iwl5000_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) +{ + /* data from PHY/DSP regarding signal strength, etc., + * contents are always there, not configurable by host + */ + struct iwl5000_non_cfg_phy *ncphy = + (struct iwl5000_non_cfg_phy *)rx_resp->non_cfg_phy_buf; + u32 val, rssi_a, rssi_b, rssi_c, max_rssi; + u8 agc; + + val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_AGC_IDX]); + agc = (val & IWL50_OFDM_AGC_MSK) >> IWL50_OFDM_AGC_BIT_POS; + + /* Find max rssi among 3 possible receivers. + * These values are measured by the digital signal processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's automatic gain control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. + */ + val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_AB_IDX]); + rssi_a = (val & IWL50_OFDM_RSSI_A_MSK) >> IWL50_OFDM_RSSI_A_BIT_POS; + rssi_b = (val & IWL50_OFDM_RSSI_B_MSK) >> IWL50_OFDM_RSSI_B_BIT_POS; + val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_C_IDX]); + rssi_c = (val & IWL50_OFDM_RSSI_C_MSK) >> IWL50_OFDM_RSSI_C_BIT_POS; + + max_rssi = max_t(u32, rssi_a, rssi_b); + max_rssi = max_t(u32, max_rssi, rssi_c); + + IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", + rssi_a, rssi_b, rssi_c, max_rssi, agc); + + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc - IWL_RSSI_OFFSET; +} + +static struct iwl_hcmd_ops iwl5000_hcmd = { + .rxon_assoc = iwl5000_send_rxon_assoc, +}; + +static struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = { + .get_hcmd_size = iwl5000_get_hcmd_size, + .build_addsta_hcmd = iwl5000_build_addsta_hcmd, + .gain_computation = iwl5000_gain_computation, + .chain_noise_reset = iwl5000_chain_noise_reset, + .rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag, + .calc_rssi = iwl5000_calc_rssi, +}; + +static struct iwl_lib_ops iwl5000_lib = { + .set_hw_params = iwl5000_hw_set_hw_params, + .alloc_shared_mem = iwl5000_alloc_shared_mem, + .free_shared_mem = iwl5000_free_shared_mem, + .shared_mem_rx_idx = iwl5000_shared_mem_rx_idx, + .txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl, + .txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl, + .txq_set_sched = iwl5000_txq_set_sched, + .txq_agg_enable = iwl5000_txq_agg_enable, + .txq_agg_disable = iwl5000_txq_agg_disable, + .rx_handler_setup = iwl5000_rx_handler_setup, + .setup_deferred_work = iwl5000_setup_deferred_work, + .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr, + .load_ucode = iwl5000_load_ucode, + .init_alive_start = iwl5000_init_alive_start, + .alive_notify = iwl5000_alive_notify, + .send_tx_power = iwl5000_send_tx_power, + .temperature = iwl5000_temperature, + .update_chain_flags = iwl4965_update_chain_flags, + .apm_ops = { + .init = iwl5000_apm_init, + .reset = iwl5000_apm_reset, + .stop = iwl5000_apm_stop, + .config = iwl5000_nic_config, + .set_pwr_src = iwl4965_set_pwr_src, + }, + .eeprom_ops = { + .regulatory_bands = { + EEPROM_5000_REG_BAND_1_CHANNELS, + EEPROM_5000_REG_BAND_2_CHANNELS, + EEPROM_5000_REG_BAND_3_CHANNELS, + EEPROM_5000_REG_BAND_4_CHANNELS, + EEPROM_5000_REG_BAND_5_CHANNELS, + EEPROM_5000_REG_BAND_24_FAT_CHANNELS, + EEPROM_5000_REG_BAND_52_FAT_CHANNELS + }, + .verify_signature = iwlcore_eeprom_verify_signature, + .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, + .release_semaphore = iwlcore_eeprom_release_semaphore, + .check_version = iwl5000_eeprom_check_version, + .query_addr = iwl5000_eeprom_query_addr, + }, +}; + +static struct iwl_ops iwl5000_ops = { + .lib = &iwl5000_lib, + .hcmd = &iwl5000_hcmd, + .utils = &iwl5000_hcmd_utils, +}; + +static struct iwl_mod_params iwl50_mod_params = { + .num_of_queues = IWL50_NUM_QUEUES, + .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES, + .enable_qos = 1, + .amsdu_size_8K = 1, + .restart_fw = 1, + /* the rest are 0 by default */ +}; + + +struct iwl_cfg iwl5300_agn_cfg = { + .name = "5300AGN", + .fw_name = "iwlwifi-5000" IWL5000_UCODE_API ".ucode", + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .ops = &iwl5000_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .mod_params = &iwl50_mod_params, +}; + +struct iwl_cfg iwl5100_bg_cfg = { + .name = "5100BG", + .fw_name = "iwlwifi-5000" IWL5000_UCODE_API ".ucode", + .sku = IWL_SKU_G, + .ops = &iwl5000_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .mod_params = &iwl50_mod_params, +}; + +struct iwl_cfg iwl5100_abg_cfg = { + .name = "5100ABG", + .fw_name = "iwlwifi-5000" IWL5000_UCODE_API ".ucode", + .sku = IWL_SKU_A|IWL_SKU_G, + .ops = &iwl5000_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .mod_params = &iwl50_mod_params, +}; + +struct iwl_cfg iwl5100_agn_cfg = { + .name = "5100AGN", + .fw_name = "iwlwifi-5000" IWL5000_UCODE_API ".ucode", + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .ops = &iwl5000_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .mod_params = &iwl50_mod_params, +}; + +struct iwl_cfg iwl5350_agn_cfg = { + .name = "5350AGN", + .fw_name = "iwlwifi-5000" IWL5000_UCODE_API ".ucode", + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .ops = &iwl5000_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .mod_params = &iwl50_mod_params, +}; + +module_param_named(disable50, iwl50_mod_params.disable, int, 0444); +MODULE_PARM_DESC(disable50, + "manually disable the 50XX radio (default 0 [radio on])"); +module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444); +MODULE_PARM_DESC(swcrypto50, + "using software crypto engine (default 0 [hardware])\n"); +module_param_named(debug50, iwl50_mod_params.debug, int, 0444); +MODULE_PARM_DESC(debug50, "50XX debug output mask"); +module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, 0444); +MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series"); +module_param_named(qos_enable50, iwl50_mod_params.enable_qos, int, 0444); +MODULE_PARM_DESC(qos_enable50, "enable all 50XX QoS functionality"); +module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, 0444); +MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality"); +module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K, int, 0444); +MODULE_PARM_DESC(amsdu_size_8K50, "enable 8K amsdu size in 50XX series"); +module_param_named(fw_restart50, iwl50_mod_params.restart_fw, int, 0444); +MODULE_PARM_DESC(fw_restart50, "restart firmware in case of error"); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c new file mode 100644 index 0000000..992364b --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -0,0 +1,2613 @@ +/****************************************************************************** + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/skbuff.h> +#include <linux/wireless.h> +#include <net/mac80211.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> + +#include <linux/workqueue.h> + +#include "../net/mac80211/rate.h" + +#include "iwl-dev.h" +#include "iwl-sta.h" +#include "iwl-core.h" +#include "iwl-helpers.h" + +#define RS_NAME "iwl-agn-rs" + +#define NUM_TRY_BEFORE_ANT_TOGGLE 1 +#define IWL_NUMBER_TRY 1 +#define IWL_HT_NUMBER_TRY 3 + +#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ +#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ +#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ + +/* max time to accum history 2 seconds */ +#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ) + +static u8 rs_ht_to_legacy[] = { + IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, + IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX +}; + +static const u8 ant_toggle_lookup[] = { + /*ANT_NONE -> */ ANT_NONE, + /*ANT_A -> */ ANT_B, + /*ANT_B -> */ ANT_C, + /*ANT_AB -> */ ANT_BC, + /*ANT_C -> */ ANT_A, + /*ANT_AC -> */ ANT_AB, + /*ANT_BC -> */ ANT_AC, + /*ANT_ABC -> */ ANT_ABC, +}; + +/** + * struct iwl_rate_scale_data -- tx success history for one rate + */ +struct iwl_rate_scale_data { + u64 data; /* bitmap of successful frames */ + s32 success_counter; /* number of frames successful */ + s32 success_ratio; /* per-cent * 128 */ + s32 counter; /* number of frames attempted */ + s32 average_tpt; /* success ratio * expected throughput */ + unsigned long stamp; +}; + +/** + * struct iwl_scale_tbl_info -- tx params and success history for all rates + * + * There are two of these in struct iwl_lq_sta, + * one for "active", and one for "search". + */ +struct iwl_scale_tbl_info { + enum iwl_table_type lq_type; + u8 ant_type; + u8 is_SGI; /* 1 = short guard interval */ + u8 is_fat; /* 1 = 40 MHz channel width */ + u8 is_dup; /* 1 = duplicated data streams */ + u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ + s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ + u32 current_rate; /* rate_n_flags, uCode API format */ + struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ +}; + +struct iwl_traffic_load { + unsigned long time_stamp; /* age of the oldest statistics */ + u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time + * slice */ + u32 total; /* total num of packets during the + * last TID_MAX_TIME_DIFF */ + u8 queue_count; /* number of queues that has + * been used since the last cleanup */ + u8 head; /* start of the circular buffer */ +}; + +/** + * struct iwl_lq_sta -- driver's rate scaling private structure + * + * Pointer to this gets passed back and forth between driver and mac80211. + */ +struct iwl_lq_sta { + u8 active_tbl; /* index of active table, range 0-1 */ + u8 enable_counter; /* indicates HT mode */ + u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ + u8 search_better_tbl; /* 1: currently trying alternate mode */ + s32 last_tpt; + + /* The following determine when to search for a new mode */ + u32 table_count_limit; + u32 max_failure_limit; /* # failed frames before new search */ + u32 max_success_limit; /* # successful frames before new search */ + u32 table_count; + u32 total_failed; /* total failed frames, any/all rates */ + u32 total_success; /* total successful frames, any/all rates */ + u32 flush_timer; /* time staying in mode before new search */ + + u8 action_counter; /* # mode-switch actions tried */ + u8 is_green; + u8 is_dup; + enum ieee80211_band band; + u8 ibss_sta_added; + + /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ + u32 supp_rates; + u16 active_legacy_rate; + u16 active_siso_rate; + u16 active_mimo2_rate; + u16 active_mimo3_rate; + u16 active_rate_basic; + + struct iwl_link_quality_cmd lq; + struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ + struct iwl_traffic_load load[TID_MAX_LOAD_COUNT]; + u8 tx_agg_tid_en; +#ifdef CONFIG_MAC80211_DEBUGFS + struct dentry *rs_sta_dbgfs_scale_table_file; + struct dentry *rs_sta_dbgfs_stats_table_file; + struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; + u32 dbg_fixed_rate; +#endif + struct iwl_priv *drv; +}; + +static void rs_rate_scale_perform(struct iwl_priv *priv, + struct net_device *dev, + struct ieee80211_hdr *hdr, + struct sta_info *sta); +static void rs_fill_link_cmd(const struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, u32 rate_n_flags); + + +#ifdef CONFIG_MAC80211_DEBUGFS +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index); +#else +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) +{} +#endif + +/* + * Expected throughput metrics for following rates: + * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits + * "G" is the only table that supports CCK (the first 4 rates). + */ +/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/ +static s32 expected_tpt_A[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186 +}; + +static s32 expected_tpt_G[IWL_RATE_COUNT] = { + 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186 +}; + +static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202 +}; + +static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211 +}; + +static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251 +}; + +static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257 +}; + +static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257 +}; + +static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264 +}; + +static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289 +}; + +static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = { + 0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293 +}; + +static inline u8 rs_extract_rate(u32 rate_n_flags) +{ + return (u8)(rate_n_flags & 0xFF); +} + +static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) +{ + window->data = 0; + window->success_counter = 0; + window->success_ratio = IWL_INVALID_VALUE; + window->counter = 0; + window->average_tpt = IWL_INVALID_VALUE; + window->stamp = 0; +} + +static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) +{ + return (ant_type & valid_antenna) == ant_type; +} + +/* + * removes the old data from the statistics. All data that is older than + * TID_MAX_TIME_DIFF, will be deleted. + */ +static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time) +{ + /* The oldest age we want to keep */ + u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; + + while (tl->queue_count && + (tl->time_stamp < oldest_time)) { + tl->total -= tl->packet_count[tl->head]; + tl->packet_count[tl->head] = 0; + tl->time_stamp += TID_QUEUE_CELL_SPACING; + tl->queue_count--; + tl->head++; + if (tl->head >= TID_QUEUE_MAX_SIZE) + tl->head = 0; + } +} + +/* + * increment traffic load value for tid and also remove + * any old values if passed the certain time period + */ +static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data, + struct ieee80211_hdr *hdr) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 index; + struct iwl_traffic_load *tl = NULL; + __le16 fc = hdr->frame_control; + u8 tid; + + if (ieee80211_is_data_qos(fc)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; + } else + return MAX_TID_COUNT; + + tl = &lq_data->load[tid]; + + curr_time -= curr_time % TID_ROUND_VALUE; + + /* Happens only for the first packet. Initialize the data */ + if (!(tl->queue_count)) { + tl->total = 1; + tl->time_stamp = curr_time; + tl->queue_count = 1; + tl->head = 0; + tl->packet_count[0] = 1; + return MAX_TID_COUNT; + } + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + index = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (index >= TID_QUEUE_MAX_SIZE) + rs_tl_rm_old_stats(tl, curr_time); + + index = (tl->head + index) % TID_QUEUE_MAX_SIZE; + tl->packet_count[index] = tl->packet_count[index] + 1; + tl->total = tl->total + 1; + + if ((index + 1) > tl->queue_count) + tl->queue_count = index + 1; + + return tid; +} + +/* + get the traffic load value for tid +*/ +static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid) +{ + u32 curr_time = jiffies_to_msecs(jiffies); + u32 time_diff; + s32 index; + struct iwl_traffic_load *tl = NULL; + + if (tid >= TID_MAX_LOAD_COUNT) + return 0; + + tl = &(lq_data->load[tid]); + + curr_time -= curr_time % TID_ROUND_VALUE; + + if (!(tl->queue_count)) + return 0; + + time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); + index = time_diff / TID_QUEUE_CELL_SPACING; + + /* The history is too long: remove data that is older than */ + /* TID_MAX_TIME_DIFF */ + if (index >= TID_QUEUE_MAX_SIZE) + rs_tl_rm_old_stats(tl, curr_time); + + return tl->total; +} + +static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, + struct iwl_lq_sta *lq_data, u8 tid, + struct sta_info *sta) +{ + unsigned long state; + DECLARE_MAC_BUF(mac); + + spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + state = sta->ampdu_mlme.tid_state_tx[tid]; + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + + if (state == HT_AGG_STATE_IDLE && + rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) { + IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n", + print_mac(mac, sta->addr), tid); + ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid); + } +} + +static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, + struct iwl_lq_sta *lq_data, + struct sta_info *sta) +{ + if ((tid < TID_MAX_LOAD_COUNT)) + rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); + else if (tid == IWL_AGG_ALL_TID) + for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) + rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); +} + +static inline int get_num_of_ant_from_rate(u32 rate_n_flags) +{ + return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_C_MSK); +} + +/** + * rs_collect_tx_data - Update the success/failure sliding window + * + * We keep a sliding window of the last 62 packets transmitted + * at this rate. window->data contains the bitmask of successful + * packets. + */ +static int rs_collect_tx_data(struct iwl_rate_scale_data *windows, + int scale_index, s32 tpt, int retries, + int successes) +{ + struct iwl_rate_scale_data *window = NULL; + static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); + s32 fail_count; + + if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) + return -EINVAL; + + /* Select data for current tx bit rate */ + window = &(windows[scale_index]); + + /* + * Keep track of only the latest 62 tx frame attempts in this rate's + * history window; anything older isn't really relevant any more. + * If we have filled up the sliding window, drop the oldest attempt; + * if the oldest attempt (highest bit in bitmap) shows "success", + * subtract "1" from the success counter (this is the main reason + * we keep these bitmaps!). + */ + while (retries > 0) { + if (window->counter >= IWL_RATE_MAX_WINDOW) { + + /* remove earliest */ + window->counter = IWL_RATE_MAX_WINDOW - 1; + + if (window->data & mask) { + window->data &= ~mask; + window->success_counter--; + } + } + + /* Increment frames-attempted counter */ + window->counter++; + + /* Shift bitmap by one frame (throw away oldest history), + * OR in "1", and increment "success" if this + * frame was successful. */ + window->data <<= 1;; + if (successes > 0) { + window->success_counter++; + window->data |= 0x1; + successes--; + } + + retries--; + } + + /* Calculate current success ratio, avoid divide-by-0! */ + if (window->counter > 0) + window->success_ratio = 128 * (100 * window->success_counter) + / window->counter; + else + window->success_ratio = IWL_INVALID_VALUE; + + fail_count = window->counter - window->success_counter; + + /* Calculate average throughput, if we have enough history. */ + if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || + (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) + window->average_tpt = (window->success_ratio * tpt + 64) / 128; + else + window->average_tpt = IWL_INVALID_VALUE; + + /* Tag this window as having been updated */ + window->stamp = jiffies; + + return 0; +} + +/* + * Fill uCode API rate_n_flags field, based on "search" or "active" table. + */ +/* FIXME:RS:remove this function and put the flags statically in the table */ +static u32 rate_n_flags_from_tbl(struct iwl_scale_tbl_info *tbl, + int index, u8 use_green) +{ + u32 rate_n_flags = 0; + + if (is_legacy(tbl->lq_type)) { + rate_n_flags = iwl_rates[index].plcp; + if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) + rate_n_flags |= RATE_MCS_CCK_MSK; + + } else if (is_Ht(tbl->lq_type)) { + if (index > IWL_LAST_OFDM_RATE) { + IWL_ERROR("invalid HT rate index %d\n", index); + index = IWL_LAST_OFDM_RATE; + } + rate_n_flags = RATE_MCS_HT_MSK; + + if (is_siso(tbl->lq_type)) + rate_n_flags |= iwl_rates[index].plcp_siso; + else if (is_mimo2(tbl->lq_type)) + rate_n_flags |= iwl_rates[index].plcp_mimo2; + else + rate_n_flags |= iwl_rates[index].plcp_mimo3; + } else { + IWL_ERROR("Invalid tbl->lq_type %d\n", tbl->lq_type); + } + + rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & + RATE_MCS_ANT_ABC_MSK); + + if (is_Ht(tbl->lq_type)) { + if (tbl->is_fat) { + if (tbl->is_dup) + rate_n_flags |= RATE_MCS_DUP_MSK; + else + rate_n_flags |= RATE_MCS_FAT_MSK; + } + if (tbl->is_SGI) + rate_n_flags |= RATE_MCS_SGI_MSK; + + if (use_green) { + rate_n_flags |= RATE_MCS_GF_MSK; + if (is_siso(tbl->lq_type) && tbl->is_SGI) { + rate_n_flags &= ~RATE_MCS_SGI_MSK; + IWL_ERROR("GF was set with SGI:SISO\n"); + } + } + } + return rate_n_flags; +} + +/* + * Interpret uCode API's rate_n_flags format, + * fill "search" or "active" tx mode table. + */ +static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, + enum ieee80211_band band, + struct iwl_scale_tbl_info *tbl, + int *rate_idx) +{ + u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); + u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); + u8 mcs; + + *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); + + if (*rate_idx == IWL_RATE_INVALID) { + *rate_idx = -1; + return -EINVAL; + } + tbl->is_SGI = 0; /* default legacy setup */ + tbl->is_fat = 0; + tbl->is_dup = 0; + tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); + tbl->lq_type = LQ_NONE; + + /* legacy rate format */ + if (!(rate_n_flags & RATE_MCS_HT_MSK)) { + if (num_of_ant == 1) { + if (band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + } + /* HT rate format */ + } else { + if (rate_n_flags & RATE_MCS_SGI_MSK) + tbl->is_SGI = 1; + + if ((rate_n_flags & RATE_MCS_FAT_MSK) || + (rate_n_flags & RATE_MCS_DUP_MSK)) + tbl->is_fat = 1; + + if (rate_n_flags & RATE_MCS_DUP_MSK) + tbl->is_dup = 1; + + mcs = rs_extract_rate(rate_n_flags); + + /* SISO */ + if (mcs <= IWL_RATE_SISO_60M_PLCP) { + if (num_of_ant == 1) + tbl->lq_type = LQ_SISO; /*else NONE*/ + /* MIMO2 */ + } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { + if (num_of_ant == 2) + tbl->lq_type = LQ_MIMO2; + /* MIMO3 */ + } else { + if (num_of_ant == 3) + tbl->lq_type = LQ_MIMO3; + } + } + return 0; +} + +/* switch to another antenna/antennas and return 1 */ +/* if no other valid antenna found, return 0 */ +static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, + struct iwl_scale_tbl_info *tbl) +{ + u8 new_ant_type; + + if (!tbl->ant_type || tbl->ant_type > ANT_ABC) + return 0; + + if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) + return 0; + + new_ant_type = ant_toggle_lookup[tbl->ant_type]; + + while ((new_ant_type != tbl->ant_type) && + !rs_is_valid_ant(valid_ant, new_ant_type)) + new_ant_type = ant_toggle_lookup[new_ant_type]; + + if (new_ant_type == tbl->ant_type) + return 0; + + tbl->ant_type = new_ant_type; + *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; + *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; + return 1; +} + +/* FIXME:RS: in 4965 we don't use greenfield at all */ +/* FIXME:RS: don't use greenfield for now in TX */ +#if 0 +static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) +{ + return (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && + priv->current_ht_config.is_green_field && + !priv->current_ht_config.non_GF_STA_present; +} +#endif +static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) +{ + return 0; +} + +/** + * rs_get_supported_rates - get the available rates + * + * if management frame or broadcast frame only return + * basic available rates. + * + */ +static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, + struct ieee80211_hdr *hdr, + enum iwl_table_type rate_type) +{ + if (hdr && is_multicast_ether_addr(hdr->addr1) && + lq_sta->active_rate_basic) + return lq_sta->active_rate_basic; + + if (is_legacy(rate_type)) { + return lq_sta->active_legacy_rate; + } else { + if (is_siso(rate_type)) + return lq_sta->active_siso_rate; + else if (is_mimo2(rate_type)) + return lq_sta->active_mimo2_rate; + else + return lq_sta->active_mimo3_rate; + } +} + +static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask, + int rate_type) +{ + u8 high = IWL_RATE_INVALID; + u8 low = IWL_RATE_INVALID; + + /* 802.11A or ht walks to the next literal adjacent rate in + * the rate table */ + if (is_a_band(rate_type) || !is_legacy(rate_type)) { + int i; + u32 mask; + + /* Find the previous rate that is in the rate mask */ + i = index - 1; + for (mask = (1 << i); i >= 0; i--, mask >>= 1) { + if (rate_mask & mask) { + low = i; + break; + } + } + + /* Find the next rate that is in the rate mask */ + i = index + 1; + for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { + if (rate_mask & mask) { + high = i; + break; + } + } + + return (high << 8) | low; + } + + low = index; + while (low != IWL_RATE_INVALID) { + low = iwl_rates[low].prev_rs; + if (low == IWL_RATE_INVALID) + break; + if (rate_mask & (1 << low)) + break; + IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low); + } + + high = index; + while (high != IWL_RATE_INVALID) { + high = iwl_rates[high].next_rs; + if (high == IWL_RATE_INVALID) + break; + if (rate_mask & (1 << high)) + break; + IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high); + } + + return (high << 8) | low; +} + +static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, + u8 scale_index, u8 ht_possible) +{ + s32 low; + u16 rate_mask; + u16 high_low; + u8 switch_to_legacy = 0; + u8 is_green = lq_sta->is_green; + + /* check if we need to switch from HT to legacy rates. + * assumption is that mandatory rates (1Mbps or 6Mbps) + * are always supported (spec demand) */ + if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { + switch_to_legacy = 1; + scale_index = rs_ht_to_legacy[scale_index]; + if (lq_sta->band == IEEE80211_BAND_5GHZ) + tbl->lq_type = LQ_A; + else + tbl->lq_type = LQ_G; + + if (num_of_ant(tbl->ant_type) > 1) + tbl->ant_type = ANT_A;/*FIXME:RS*/ + + tbl->is_fat = 0; + tbl->is_SGI = 0; + } + + rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); + + /* Mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + /* supp_rates has no CCK bits in A mode */ + if (lq_sta->band == IEEE80211_BAND_5GHZ) + rate_mask = (u16)(rate_mask & + (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); + else + rate_mask = (u16)(rate_mask & lq_sta->supp_rates); + } + + /* If we switched from HT to legacy, check current rate */ + if (switch_to_legacy && (rate_mask & (1 << scale_index))) { + low = scale_index; + goto out; + } + + high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, + tbl->lq_type); + low = high_low & 0xff; + + if (low == IWL_RATE_INVALID) + low = scale_index; + +out: + return rate_n_flags_from_tbl(tbl, low, is_green); +} + +/* + * mac80211 sends us Tx status + */ +static void rs_tx_status(void *priv_rate, struct net_device *dev, + struct sk_buff *skb, + struct ieee80211_tx_status *tx_resp) +{ + int status; + u8 retries; + int rs_index, index = 0; + struct iwl_lq_sta *lq_sta; + struct iwl_link_quality_cmd *table; + struct sta_info *sta; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct iwl_priv *priv = (struct iwl_priv *)priv_rate; + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_hw *hw = local_to_hw(local); + struct iwl_rate_scale_data *window = NULL; + struct iwl_rate_scale_data *search_win = NULL; + u32 tx_rate; + struct iwl_scale_tbl_info tbl_type; + struct iwl_scale_tbl_info *curr_tbl, *search_tbl; + u8 active_index = 0; + __le16 fc = hdr->frame_control; + s32 tpt = 0; + + IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n"); + + if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) + return; + + /* This packet was aggregated but doesn't carry rate scale info */ + if ((tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) && + !(tx_resp->flags & IEEE80211_TX_STATUS_AMPDU)) + return; + + retries = tx_resp->retry_count; + + if (retries > 15) + retries = 15; + + rcu_read_lock(); + + sta = sta_info_get(local, hdr->addr1); + + if (!sta || !sta->rate_ctrl_priv) + goto out; + + + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + + if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + !lq_sta->ibss_sta_added) + goto out; + + table = &lq_sta->lq; + active_index = lq_sta->active_tbl; + + curr_tbl = &(lq_sta->lq_info[active_index]); + search_tbl = &(lq_sta->lq_info[(1 - active_index)]); + window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]); + search_win = (struct iwl_rate_scale_data *)&(search_tbl->win[0]); + + /* + * Ignore this Tx frame response if its initial rate doesn't match + * that of latest Link Quality command. There may be stragglers + * from a previous Link Quality command, but we're no longer interested + * in those; they're either from the "active" mode while we're trying + * to check "search" mode, or a prior "search" mode after we've moved + * to a new "search" mode (which might become the new "active" mode). + */ + tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); + if (priv->band == IEEE80211_BAND_5GHZ) + rs_index -= IWL_FIRST_OFDM_RATE; + + if ((tx_resp->control.tx_rate == NULL) || + (tbl_type.is_SGI ^ + !!(tx_resp->control.flags & IEEE80211_TXCTL_SHORT_GI)) || + (tbl_type.is_fat ^ + !!(tx_resp->control.flags & IEEE80211_TXCTL_40_MHZ_WIDTH)) || + (tbl_type.is_dup ^ + !!(tx_resp->control.flags & IEEE80211_TXCTL_DUP_DATA)) || + (tbl_type.ant_type ^ tx_resp->control.antenna_sel_tx) || + (!!(tx_rate & RATE_MCS_HT_MSK) ^ + !!(tx_resp->control.flags & IEEE80211_TXCTL_OFDM_HT)) || + (!!(tx_rate & RATE_MCS_GF_MSK) ^ + !!(tx_resp->control.flags & IEEE80211_TXCTL_GREEN_FIELD)) || + (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate != + tx_resp->control.tx_rate->bitrate)) { + IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate); + goto out; + } + + /* Update frame history window with "failure" for each Tx retry. */ + while (retries) { + /* Look up the rate and other info used for each tx attempt. + * Each tx attempt steps one entry deeper in the rate table. */ + tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, + &tbl_type, &rs_index); + + /* If type matches "search" table, + * add failure to "search" history */ + if ((tbl_type.lq_type == search_tbl->lq_type) && + (tbl_type.ant_type == search_tbl->ant_type) && + (tbl_type.is_SGI == search_tbl->is_SGI)) { + if (search_tbl->expected_tpt) + tpt = search_tbl->expected_tpt[rs_index]; + else + tpt = 0; + rs_collect_tx_data(search_win, rs_index, tpt, 1, 0); + + /* Else if type matches "current/active" table, + * add failure to "current/active" history */ + } else if ((tbl_type.lq_type == curr_tbl->lq_type) && + (tbl_type.ant_type == curr_tbl->ant_type) && + (tbl_type.is_SGI == curr_tbl->is_SGI)) { + if (curr_tbl->expected_tpt) + tpt = curr_tbl->expected_tpt[rs_index]; + else + tpt = 0; + rs_collect_tx_data(window, rs_index, tpt, 1, 0); + } + + /* If not searching for a new mode, increment failed counter + * ... this helps determine when to start searching again */ + if (lq_sta->stay_in_tbl) + lq_sta->total_failed++; + --retries; + index++; + + } + + /* + * Find (by rate) the history window to update with final Tx attempt; + * if Tx was successful first try, use original rate, + * else look up the rate that was, finally, successful. + */ + tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); + + /* Update frame history window with "success" if Tx got ACKed ... */ + status = !!(tx_resp->flags & IEEE80211_TX_STATUS_ACK); + + /* If type matches "search" table, + * add final tx status to "search" history */ + if ((tbl_type.lq_type == search_tbl->lq_type) && + (tbl_type.ant_type == search_tbl->ant_type) && + (tbl_type.is_SGI == search_tbl->is_SGI)) { + if (search_tbl->expected_tpt) + tpt = search_tbl->expected_tpt[rs_index]; + else + tpt = 0; + if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) + rs_collect_tx_data(search_win, rs_index, tpt, + tx_resp->ampdu_ack_len, + tx_resp->ampdu_ack_map); + else + rs_collect_tx_data(search_win, rs_index, tpt, + 1, status); + /* Else if type matches "current/active" table, + * add final tx status to "current/active" history */ + } else if ((tbl_type.lq_type == curr_tbl->lq_type) && + (tbl_type.ant_type == curr_tbl->ant_type) && + (tbl_type.is_SGI == curr_tbl->is_SGI)) { + if (curr_tbl->expected_tpt) + tpt = curr_tbl->expected_tpt[rs_index]; + else + tpt = 0; + if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) + rs_collect_tx_data(window, rs_index, tpt, + tx_resp->ampdu_ack_len, + tx_resp->ampdu_ack_map); + else + rs_collect_tx_data(window, rs_index, tpt, + 1, status); + } + + /* If not searching for new mode, increment success/failed counter + * ... these help determine when to start searching again */ + if (lq_sta->stay_in_tbl) { + if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) { + lq_sta->total_success += tx_resp->ampdu_ack_map; + lq_sta->total_failed += + (tx_resp->ampdu_ack_len - tx_resp->ampdu_ack_map); + } else { + if (status) + lq_sta->total_success++; + else + lq_sta->total_failed++; + } + } + + /* See if there's a better rate or modulation mode to try. */ + rs_rate_scale_perform(priv, dev, hdr, sta); +out: + rcu_read_unlock(); + return; +} + +/* + * Begin a period of staying with a selected modulation mode. + * Set "stay_in_tbl" flag to prevent any mode switches. + * Set frame tx success limits according to legacy vs. high-throughput, + * and reset overall (spanning all rates) tx success history statistics. + * These control how long we stay using same modulation mode before + * searching for a new mode. + */ +static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, + struct iwl_lq_sta *lq_sta) +{ + IWL_DEBUG_RATE("we are staying in the same table\n"); + lq_sta->stay_in_tbl = 1; /* only place this gets set */ + if (is_legacy) { + lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; + lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; + } else { + lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; + lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; + lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; + } + lq_sta->table_count = 0; + lq_sta->total_failed = 0; + lq_sta->total_success = 0; +} + +/* + * Find correct throughput table for given mode of modulation + */ +static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl) +{ + if (is_legacy(tbl->lq_type)) { + if (!is_a_band(tbl->lq_type)) + tbl->expected_tpt = expected_tpt_G; + else + tbl->expected_tpt = expected_tpt_A; + } else if (is_siso(tbl->lq_type)) { + if (tbl->is_fat && !lq_sta->is_dup) + if (tbl->is_SGI) + tbl->expected_tpt = expected_tpt_siso40MHzSGI; + else + tbl->expected_tpt = expected_tpt_siso40MHz; + else if (tbl->is_SGI) + tbl->expected_tpt = expected_tpt_siso20MHzSGI; + else + tbl->expected_tpt = expected_tpt_siso20MHz; + + } else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */ + if (tbl->is_fat && !lq_sta->is_dup) + if (tbl->is_SGI) + tbl->expected_tpt = expected_tpt_mimo40MHzSGI; + else + tbl->expected_tpt = expected_tpt_mimo40MHz; + else if (tbl->is_SGI) + tbl->expected_tpt = expected_tpt_mimo20MHzSGI; + else + tbl->expected_tpt = expected_tpt_mimo20MHz; + } else + tbl->expected_tpt = expected_tpt_G; +} + +/* + * Find starting rate for new "search" high-throughput mode of modulation. + * Goal is to find lowest expected rate (under perfect conditions) that is + * above the current measured throughput of "active" mode, to give new mode + * a fair chance to prove itself without too many challenges. + * + * This gets called when transitioning to more aggressive modulation + * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive + * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need + * to decrease to match "active" throughput. When moving from MIMO to SISO, + * bit rate will typically need to increase, but not if performance was bad. + */ +static s32 rs_get_best_rate(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, /* "search" */ + u16 rate_mask, s8 index) +{ + /* "active" values */ + struct iwl_scale_tbl_info *active_tbl = + &(lq_sta->lq_info[lq_sta->active_tbl]); + s32 active_sr = active_tbl->win[index].success_ratio; + s32 active_tpt = active_tbl->expected_tpt[index]; + + /* expected "search" throughput */ + s32 *tpt_tbl = tbl->expected_tpt; + + s32 new_rate, high, low, start_hi; + u16 high_low; + s8 rate = index; + + new_rate = high = low = start_hi = IWL_RATE_INVALID; + + for (; ;) { + high_low = rs_get_adjacent_rate(priv, rate, rate_mask, + tbl->lq_type); + + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + /* + * Lower the "search" bit rate, to give new "search" mode + * approximately the same throughput as "active" if: + * + * 1) "Active" mode has been working modestly well (but not + * great), and expected "search" throughput (under perfect + * conditions) at candidate rate is above the actual + * measured "active" throughput (but less than expected + * "active" throughput under perfect conditions). + * OR + * 2) "Active" mode has been working perfectly or very well + * and expected "search" throughput (under perfect + * conditions) at candidate rate is above expected + * "active" throughput (under perfect conditions). + */ + if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && + ((active_sr > IWL_RATE_DECREASE_TH) && + (active_sr <= IWL_RATE_HIGH_TH) && + (tpt_tbl[rate] <= active_tpt))) || + ((active_sr >= IWL_RATE_SCALE_SWITCH) && + (tpt_tbl[rate] > active_tpt))) { + + /* (2nd or later pass) + * If we've already tried to raise the rate, and are + * now trying to lower it, use the higher rate. */ + if (start_hi != IWL_RATE_INVALID) { + new_rate = start_hi; + break; + } + + new_rate = rate; + + /* Loop again with lower rate */ + if (low != IWL_RATE_INVALID) + rate = low; + + /* Lower rate not available, use the original */ + else + break; + + /* Else try to raise the "search" rate to match "active" */ + } else { + /* (2nd or later pass) + * If we've already tried to lower the rate, and are + * now trying to raise it, use the lower rate. */ + if (new_rate != IWL_RATE_INVALID) + break; + + /* Loop again with higher rate */ + else if (high != IWL_RATE_INVALID) { + start_hi = high; + rate = high; + + /* Higher rate not available, use the original */ + } else { + break; + } + } + } + + return new_rate; +} + +/* + * Set up search table for MIMO + */ +static int rs_switch_to_mimo2(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + s32 rate; + s8 is_green = lq_sta->is_green; + + if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || + !sta->ht_info.ht_supported) + return -1; + + if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2) + == IWL_MIMO_PS_STATIC) + return -1; + + /* Need both Tx chains/antennas to support MIMO */ + if (priv->hw_params.tx_chains_num < 2) + return -1; + + IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n"); + + tbl->lq_type = LQ_MIMO2; + tbl->is_dup = lq_sta->is_dup; + tbl->action = 0; + rate_mask = lq_sta->active_mimo2_rate; + + if (priv->current_ht_config.supported_chan_width + == IWL_CHANNEL_WIDTH_40MHZ) + tbl->is_fat = 1; + else + tbl->is_fat = 0; + + /* FIXME: - don't toggle SGI here + if (tbl->is_fat) { + if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) + tbl->is_SGI = 1; + else + tbl->is_SGI = 0; + } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) + tbl->is_SGI = 1; + else + tbl->is_SGI = 0; + */ + + rs_set_expected_tpt_table(lq_sta, tbl); + + rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); + + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); + + IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Set up search table for SISO + */ +static int rs_switch_to_siso(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, + struct iwl_scale_tbl_info *tbl, int index) +{ + u16 rate_mask; + u8 is_green = lq_sta->is_green; + s32 rate; + + if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || + !sta->ht_info.ht_supported) + return -1; + + IWL_DEBUG_RATE("LQ: try to switch to SISO\n"); + + tbl->is_dup = lq_sta->is_dup; + tbl->lq_type = LQ_SISO; + tbl->action = 0; + rate_mask = lq_sta->active_siso_rate; + + if (priv->current_ht_config.supported_chan_width + == IWL_CHANNEL_WIDTH_40MHZ) + tbl->is_fat = 1; + else + tbl->is_fat = 0; + + /* FIXME: - don't toggle SGI here + if (tbl->is_fat) { + if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) + tbl->is_SGI = 1; + else + tbl->is_SGI = 0; + } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) + tbl->is_SGI = 1; + else + tbl->is_SGI = 0; + */ + + if (is_green) + tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ + + rs_set_expected_tpt_table(lq_sta, tbl); + rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); + + IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask); + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n", + rate, rate_mask); + return -1; + } + tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); + IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); + return 0; +} + +/* + * Try to switch to new modulation mode from legacy + */ +static int rs_move_legacy_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, + int index) +{ + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action = tbl->action; + u8 valid_tx_ant = priv->hw_params.valid_tx_ant; + int ret = 0; + + for (; ;) { + switch (tbl->action) { + case IWL_LEGACY_SWITCH_ANTENNA: + IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n"); + + lq_sta->action_counter++; + + /* Don't change antenna if success has been great */ + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + /* Set up search table to try other antenna */ + memcpy(search_tbl, tbl, sz); + + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) { + lq_sta->search_better_tbl = 1; + goto out; + } + break; + case IWL_LEGACY_SWITCH_SISO: + IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n"); + + /* Set up search table to try SISO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + ret = rs_switch_to_siso(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->search_better_tbl = 1; + lq_sta->action_counter = 0; + goto out; + } + + break; + case IWL_LEGACY_SWITCH_MIMO2: + IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n"); + + /* Set up search table to try MIMO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + search_tbl->ant_type = ANT_AB;/*FIXME:RS*/ + /*FIXME:RS:need to check ant validity*/ + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->search_better_tbl = 1; + lq_sta->action_counter = 0; + goto out; + } + break; + } + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA; + + if (tbl->action == start_action) + break; + + } + return 0; + + out: + tbl->action++; + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) + tbl->action = IWL_LEGACY_SWITCH_ANTENNA; + return 0; + +} + +/* + * Try to switch to new modulation mode from SISO + */ +static int rs_move_siso_to_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, int index) +{ + u8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action = tbl->action; + u8 valid_tx_ant = priv->hw_params.valid_tx_ant; + int ret; + + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_SISO_SWITCH_ANTENNA: + IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n"); + if (window->success_ratio >= IWL_RS_GOOD_RATIO) + break; + + memcpy(search_tbl, tbl, sz); + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) { + lq_sta->search_better_tbl = 1; + goto out; + } + break; + case IWL_SISO_SWITCH_MIMO2: + IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n"); + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = 0; + search_tbl->ant_type = ANT_AB; /*FIXME:RS*/ + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->search_better_tbl = 1; + goto out; + } + break; + case IWL_SISO_SWITCH_GI: + if (!tbl->is_fat && + !(priv->current_ht_config.sgf & + HT_SHORT_GI_20MHZ)) + break; + if (tbl->is_fat && + !(priv->current_ht_config.sgf & + HT_SHORT_GI_40MHZ)) + break; + + IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n"); + + memcpy(search_tbl, tbl, sz); + if (is_green) { + if (!tbl->is_SGI) + break; + else + IWL_ERROR("SGI was set in GF+SISO\n"); + } + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = rate_n_flags_from_tbl( + search_tbl, index, is_green); + lq_sta->search_better_tbl = 1; + goto out; + } + tbl->action++; + if (tbl->action > IWL_SISO_SWITCH_GI) + tbl->action = IWL_SISO_SWITCH_ANTENNA; + + if (tbl->action == start_action) + break; + } + return 0; + + out: + tbl->action++; + if (tbl->action > IWL_SISO_SWITCH_GI) + tbl->action = IWL_SISO_SWITCH_ANTENNA; + return 0; +} + +/* + * Try to switch to new modulation mode from MIMO + */ +static int rs_move_mimo_to_other(struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, int index) +{ + s8 is_green = lq_sta->is_green; + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); + u8 start_action = tbl->action; + /*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/ + int ret; + + for (;;) { + lq_sta->action_counter++; + switch (tbl->action) { + case IWL_MIMO_SWITCH_ANTENNA_A: + case IWL_MIMO_SWITCH_ANTENNA_B: + IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n"); + + /* Set up new search table for SISO */ + memcpy(search_tbl, tbl, sz); + + /*FIXME:RS:need to check ant validity + C*/ + if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A) + search_tbl->ant_type = ANT_A; + else + search_tbl->ant_type = ANT_B; + + ret = rs_switch_to_siso(priv, lq_sta, conf, sta, + search_tbl, index); + if (!ret) { + lq_sta->search_better_tbl = 1; + goto out; + } + break; + + case IWL_MIMO_SWITCH_GI: + if (!tbl->is_fat && + !(priv->current_ht_config.sgf & + HT_SHORT_GI_20MHZ)) + break; + if (tbl->is_fat && + !(priv->current_ht_config.sgf & + HT_SHORT_GI_40MHZ)) + break; + + IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n"); + + /* Set up new search table for MIMO */ + memcpy(search_tbl, tbl, sz); + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + /* + * If active table already uses the fastest possible + * modulation (dual stream with short guard interval), + * and it's working well, there's no need to look + * for a better type of modulation! + */ + if (tbl->is_SGI) { + s32 tpt = lq_sta->last_tpt / 100; + if (tpt >= search_tbl->expected_tpt[index]) + break; + } + search_tbl->current_rate = rate_n_flags_from_tbl( + search_tbl, index, is_green); + lq_sta->search_better_tbl = 1; + goto out; + + } + tbl->action++; + if (tbl->action > IWL_MIMO_SWITCH_GI) + tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; + + if (tbl->action == start_action) + break; + } + + return 0; + out: + tbl->action++; + if (tbl->action > IWL_MIMO_SWITCH_GI) + tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; + return 0; + +} + +/* + * Check whether we should continue using same modulation mode, or + * begin search for a new mode, based on: + * 1) # tx successes or failures while using this mode + * 2) # times calling this function + * 3) elapsed time in this mode (not used, for now) + */ +static void rs_stay_in_table(struct iwl_lq_sta *lq_sta) +{ + struct iwl_scale_tbl_info *tbl; + int i; + int active_tbl; + int flush_interval_passed = 0; + struct iwl_priv *priv; + + priv = lq_sta->drv; + active_tbl = lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + /* If we've been disallowing search, see if we should now allow it */ + if (lq_sta->stay_in_tbl) { + + /* Elapsed time using current modulation mode */ + if (lq_sta->flush_timer) + flush_interval_passed = + time_after(jiffies, + (unsigned long)(lq_sta->flush_timer + + IWL_RATE_SCALE_FLUSH_INTVL)); + + /* + * Check if we should allow search for new modulation mode. + * If many frames have failed or succeeded, or we've used + * this same modulation for a long time, allow search, and + * reset history stats that keep track of whether we should + * allow a new search. Also (below) reset all bitmaps and + * stats in active history. + */ + if ((lq_sta->total_failed > lq_sta->max_failure_limit) || + (lq_sta->total_success > lq_sta->max_success_limit) || + ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) + && (flush_interval_passed))) { + IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:", + lq_sta->total_failed, + lq_sta->total_success, + flush_interval_passed); + + /* Allow search for new mode */ + lq_sta->stay_in_tbl = 0; /* only place reset */ + lq_sta->total_failed = 0; + lq_sta->total_success = 0; + lq_sta->flush_timer = 0; + + /* + * Else if we've used this modulation mode enough repetitions + * (regardless of elapsed time or success/failure), reset + * history bitmaps and rate-specific stats for all rates in + * active table. + */ + } else { + lq_sta->table_count++; + if (lq_sta->table_count >= + lq_sta->table_count_limit) { + lq_sta->table_count = 0; + + IWL_DEBUG_RATE("LQ: stay in table clear win\n"); + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window( + &(tbl->win[i])); + } + } + + /* If transitioning to allow "search", reset all history + * bitmaps and stats in active table (this will become the new + * "search" table). */ + if (!lq_sta->stay_in_tbl) { + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(tbl->win[i])); + } + } +} + +/* + * Do rate scaling and search for new modulation mode. + */ +static void rs_rate_scale_perform(struct iwl_priv *priv, + struct net_device *dev, + struct ieee80211_hdr *hdr, + struct sta_info *sta) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_hw *hw = local_to_hw(local); + struct ieee80211_conf *conf = &hw->conf; + int low = IWL_RATE_INVALID; + int high = IWL_RATE_INVALID; + int index; + int i; + struct iwl_rate_scale_data *window = NULL; + int current_tpt = IWL_INVALID_VALUE; + int low_tpt = IWL_INVALID_VALUE; + int high_tpt = IWL_INVALID_VALUE; + u32 fail_count; + s8 scale_action = 0; + __le16 fc; + u16 rate_mask; + u8 update_lq = 0; + struct iwl_lq_sta *lq_sta; + struct iwl_scale_tbl_info *tbl, *tbl1; + u16 rate_scale_index_msk = 0; + u32 rate; + u8 is_green = 0; + u8 active_tbl = 0; + u8 done_search = 0; + u16 high_low; + s32 sr; + u8 tid = MAX_TID_COUNT; + + IWL_DEBUG_RATE("rate scale calculate new rate for skb\n"); + + fc = hdr->frame_control; + if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) { + /* Send management frames and broadcast/multicast data using + * lowest rate. */ + /* TODO: this could probably be improved.. */ + return; + } + + if (!sta || !sta->rate_ctrl_priv) + return; + + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + + tid = rs_tl_add_packet(lq_sta, hdr); + + /* + * Select rate-scale / modulation-mode table to work with in + * the rest of this function: "search" if searching for better + * modulation mode, or "active" if doing rate scaling within a mode. + */ + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + is_green = lq_sta->is_green; + + /* current tx rate */ + index = sta->last_txrate_idx; + + IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index, + tbl->lq_type); + + /* rates available for this association, and for modulation mode */ + rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); + + IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask); + + /* mask with station rate restriction */ + if (is_legacy(tbl->lq_type)) { + if (lq_sta->band == IEEE80211_BAND_5GHZ) + /* supp_rates has no CCK bits in A mode */ + rate_scale_index_msk = (u16) (rate_mask & + (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); + else + rate_scale_index_msk = (u16) (rate_mask & + lq_sta->supp_rates); + + } else + rate_scale_index_msk = rate_mask; + + if (!rate_scale_index_msk) + rate_scale_index_msk = rate_mask; + + if (!((1 << index) & rate_scale_index_msk)) { + IWL_ERROR("Current Rate is not valid\n"); + return; + } + + /* Get expected throughput table and history window for current rate */ + if (!tbl->expected_tpt) { + IWL_ERROR("tbl->expected_tpt is NULL\n"); + return; + } + + window = &(tbl->win[index]); + + /* + * If there is not enough history to calculate actual average + * throughput, keep analyzing results of more tx frames, without + * changing rate or mode (bypass most of the rest of this function). + * Set up new rate table in uCode only if old rate is not supported + * in current association (use new rate found above). + */ + fail_count = window->counter - window->success_counter; + if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && + (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { + IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d " + "for index %d\n", + window->success_counter, window->counter, index); + + /* Can't calculate this yet; not enough history */ + window->average_tpt = IWL_INVALID_VALUE; + + /* Should we stay with this modulation mode, + * or search for a new one? */ + rs_stay_in_table(lq_sta); + + goto out; + + /* Else we have enough samples; calculate estimate of + * actual average throughput */ + } else { + /*FIXME:RS remove this else if we don't get this error*/ + if (window->average_tpt != ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128)) { + IWL_ERROR("expected_tpt should have been calculated" + " by now\n"); + window->average_tpt = ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128); + } + } + + /* If we are searching for better modulation mode, check success. */ + if (lq_sta->search_better_tbl) { + + /* If good success, continue using the "search" mode; + * no need to send new link quality command, since we're + * continuing to use the setup that we've been trying. */ + if (window->average_tpt > lq_sta->last_tpt) { + + IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE " + "suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + + if (!is_legacy(tbl->lq_type)) + lq_sta->enable_counter = 1; + + /* Swap tables; "search" becomes "active" */ + lq_sta->active_tbl = active_tbl; + current_tpt = window->average_tpt; + + /* Else poor success; go back to mode in "active" table */ + } else { + + IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE " + "suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + + /* Nullify "search" table */ + tbl->lq_type = LQ_NONE; + + /* Revert to "active" table */ + active_tbl = lq_sta->active_tbl; + tbl = &(lq_sta->lq_info[active_tbl]); + + /* Revert to "active" rate and throughput info */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + current_tpt = lq_sta->last_tpt; + + /* Need to set up a new rate table in uCode */ + update_lq = 1; + } + + /* Either way, we've made a decision; modulation mode + * search is done, allow rate adjustment next time. */ + lq_sta->search_better_tbl = 0; + done_search = 1; /* Don't switch modes below! */ + goto lq_update; + } + + /* (Else) not in search of better modulation mode, try for better + * starting rate, while staying in this mode. */ + high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk, + tbl->lq_type); + low = high_low & 0xff; + high = (high_low >> 8) & 0xff; + + sr = window->success_ratio; + + /* Collect measured throughputs for current and adjacent rates */ + current_tpt = window->average_tpt; + if (low != IWL_RATE_INVALID) + low_tpt = tbl->win[low].average_tpt; + if (high != IWL_RATE_INVALID) + high_tpt = tbl->win[high].average_tpt; + + scale_action = 0; + + /* Too many failures, decrease rate */ + if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { + IWL_DEBUG_RATE("decrease rate because of low success_ratio\n"); + scale_action = -1; + + /* No throughput measured yet for adjacent rates; try increase. */ + } else if ((low_tpt == IWL_INVALID_VALUE) && + (high_tpt == IWL_INVALID_VALUE)) { + + if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) + scale_action = 1; + else if (low != IWL_RATE_INVALID) + scale_action = -1; + } + + /* Both adjacent throughputs are measured, but neither one has better + * throughput; we're using the best rate, don't change it! */ + else if ((low_tpt != IWL_INVALID_VALUE) && + (high_tpt != IWL_INVALID_VALUE) && + (low_tpt < current_tpt) && + (high_tpt < current_tpt)) + scale_action = 0; + + /* At least one adjacent rate's throughput is measured, + * and may have better performance. */ + else { + /* Higher adjacent rate's throughput is measured */ + if (high_tpt != IWL_INVALID_VALUE) { + /* Higher rate has better throughput */ + if (high_tpt > current_tpt && + sr >= IWL_RATE_INCREASE_TH) { + scale_action = 1; + } else { + IWL_DEBUG_RATE + ("decrease rate because of high tpt\n"); + scale_action = -1; + } + + /* Lower adjacent rate's throughput is measured */ + } else if (low_tpt != IWL_INVALID_VALUE) { + /* Lower rate has better throughput */ + if (low_tpt > current_tpt) { + IWL_DEBUG_RATE + ("decrease rate because of low tpt\n"); + scale_action = -1; + } else if (sr >= IWL_RATE_INCREASE_TH) { + scale_action = 1; + } + } + } + + /* Sanity check; asked for decrease, but success rate or throughput + * has been good at old rate. Don't change it. */ + if ((scale_action == -1) && (low != IWL_RATE_INVALID) && + ((sr > IWL_RATE_HIGH_TH) || + (current_tpt > (100 * tbl->expected_tpt[low])))) + scale_action = 0; + + switch (scale_action) { + case -1: + /* Decrease starting rate, update uCode's rate table */ + if (low != IWL_RATE_INVALID) { + update_lq = 1; + index = low; + } + break; + case 1: + /* Increase starting rate, update uCode's rate table */ + if (high != IWL_RATE_INVALID) { + update_lq = 1; + index = high; + } + + break; + case 0: + /* No change */ + default: + break; + } + + IWL_DEBUG_RATE("choose rate scale index %d action %d low %d " + "high %d type %d\n", + index, scale_action, low, high, tbl->lq_type); + +lq_update: + /* Replace uCode's rate table for the destination station. */ + if (update_lq) { + rate = rate_n_flags_from_tbl(tbl, index, is_green); + rs_fill_link_cmd(priv, lq_sta, rate); + iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); + } + + /* Should we stay with this modulation mode, or search for a new one? */ + rs_stay_in_table(lq_sta); + + /* + * Search for new modulation mode if we're: + * 1) Not changing rates right now + * 2) Not just finishing up a search + * 3) Allowing a new search + */ + if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { + /* Save current throughput to compare with "search" throughput*/ + lq_sta->last_tpt = current_tpt; + + /* Select a new "search" modulation mode to try. + * If one is found, set up the new "search" table. */ + if (is_legacy(tbl->lq_type)) + rs_move_legacy_other(priv, lq_sta, conf, sta, index); + else if (is_siso(tbl->lq_type)) + rs_move_siso_to_other(priv, lq_sta, conf, sta, index); + else + rs_move_mimo_to_other(priv, lq_sta, conf, sta, index); + + /* If new "search" mode was selected, set up in uCode table */ + if (lq_sta->search_better_tbl) { + /* Access the "search" table, clear its history. */ + tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&(tbl->win[i])); + + /* Use new "search" start rate */ + index = iwl_hwrate_to_plcp_idx(tbl->current_rate); + + IWL_DEBUG_RATE("Switch current mcs: %X index: %d\n", + tbl->current_rate, index); + rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); + iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); + } + + /* If the "active" (non-search) mode was legacy, + * and we've tried switching antennas, + * but we haven't been able to try HT modes (not available), + * stay with best antenna legacy modulation for a while + * before next round of mode comparisons. */ + tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); + if (is_legacy(tbl1->lq_type) && + (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) && + (lq_sta->action_counter >= 1)) { + lq_sta->action_counter = 0; + IWL_DEBUG_RATE("LQ: STAY in legacy table\n"); + rs_set_stay_in_table(priv, 1, lq_sta); + } + + /* If we're in an HT mode, and all 3 mode switch actions + * have been tried and compared, stay in this best modulation + * mode for a while before next round of mode comparisons. */ + if (lq_sta->enable_counter && + (lq_sta->action_counter >= IWL_ACTION_LIMIT)) { + if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && + (lq_sta->tx_agg_tid_en & (1 << tid)) && + (tid != MAX_TID_COUNT)) { + IWL_DEBUG_RATE("try to aggregate tid %d\n", tid); + rs_tl_turn_on_agg(priv, tid, lq_sta, sta); + } + lq_sta->action_counter = 0; + rs_set_stay_in_table(priv, 0, lq_sta); + } + + /* + * Else, don't search for a new modulation mode. + * Put new timestamp in stay-in-modulation-mode flush timer if: + * 1) Not changing rates right now + * 2) Not just finishing up a search + * 3) flush timer is empty + */ + } else { + if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer)) + lq_sta->flush_timer = jiffies; + } + +out: + tbl->current_rate = rate_n_flags_from_tbl(tbl, index, is_green); + i = index; + sta->last_txrate_idx = i; + + /* sta->txrate_idx is an index to A mode rates which start + * at IWL_FIRST_OFDM_RATE + */ + if (lq_sta->band == IEEE80211_BAND_5GHZ) + sta->txrate_idx = i - IWL_FIRST_OFDM_RATE; + else + sta->txrate_idx = i; + + return; +} + + +static void rs_initialize_lq(struct iwl_priv *priv, + struct ieee80211_conf *conf, + struct sta_info *sta) +{ + struct iwl_lq_sta *lq_sta; + struct iwl_scale_tbl_info *tbl; + int rate_idx; + int i; + u32 rate; + u8 use_green = rs_use_green(priv, conf); + u8 active_tbl = 0; + u8 valid_tx_ant; + + if (!sta || !sta->rate_ctrl_priv) + goto out; + + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + i = sta->last_txrate_idx; + + if ((lq_sta->lq.sta_id == 0xff) && + (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)) + goto out; + + valid_tx_ant = priv->hw_params.valid_tx_ant; + + if (!lq_sta->search_better_tbl) + active_tbl = lq_sta->active_tbl; + else + active_tbl = 1 - lq_sta->active_tbl; + + tbl = &(lq_sta->lq_info[active_tbl]); + + if ((i < 0) || (i >= IWL_RATE_COUNT)) + i = 0; + + /* FIXME:RS: This is also wrong in 4965 */ + rate = iwl_rates[i].plcp; + rate |= RATE_MCS_ANT_B_MSK; + rate &= ~RATE_MCS_ANT_A_MSK; + + if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) + rate |= RATE_MCS_CCK_MSK; + + tbl->ant_type = ANT_B; + rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx); + if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) + rs_toggle_antenna(valid_tx_ant, &rate, tbl); + + rate = rate_n_flags_from_tbl(tbl, rate_idx, use_green); + tbl->current_rate = rate; + rs_set_expected_tpt_table(lq_sta, tbl); + rs_fill_link_cmd(NULL, lq_sta, rate); + iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); + out: + return; +} + +static void rs_get_rate(void *priv_rate, struct net_device *dev, + struct ieee80211_supported_band *sband, + struct sk_buff *skb, + struct rate_selection *sel) +{ + + int i; + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_conf *conf = &local->hw.conf; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct sta_info *sta; + __le16 fc; + struct iwl_priv *priv = (struct iwl_priv *)priv_rate; + struct iwl_lq_sta *lq_sta; + + IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); + + rcu_read_lock(); + + sta = sta_info_get(local, hdr->addr1); + + /* Send management frames and broadcast/multicast data using lowest + * rate. */ + fc = hdr->frame_control; + if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || + !sta || !sta->rate_ctrl_priv) { + sel->rate = rate_lowest(local, sband, sta); + goto out; + } + + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; + i = sta->last_txrate_idx; + + if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + !lq_sta->ibss_sta_added) { + u8 sta_id = iwl_find_station(priv, hdr->addr1); + DECLARE_MAC_BUF(mac); + + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_RATE("LQ: ADD station %s\n", + print_mac(mac, hdr->addr1)); + sta_id = iwl_add_station_flags(priv, hdr->addr1, + 0, CMD_ASYNC, NULL); + } + if ((sta_id != IWL_INVALID_STATION)) { + lq_sta->lq.sta_id = sta_id; + lq_sta->lq.rs_table[0].rate_n_flags = 0; + lq_sta->ibss_sta_added = 1; + rs_initialize_lq(priv, conf, sta); + } + } + + if ((i < 0) || (i > IWL_RATE_COUNT)) { + sel->rate = rate_lowest(local, sband, sta); + goto out; + } + + sel->rate = &priv->ieee_rates[i]; +out: + rcu_read_unlock(); +} + +static void *rs_alloc_sta(void *priv_rate, gfp_t gfp) +{ + struct iwl_lq_sta *lq_sta; + struct iwl_priv *priv; + int i, j; + + priv = (struct iwl_priv *)priv_rate; + IWL_DEBUG_RATE("create station rate scale window\n"); + + lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp); + + if (lq_sta == NULL) + return NULL; + lq_sta->lq.sta_id = 0xff; + + + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); + + return lq_sta; +} + +static void rs_rate_init(void *priv_rate, void *priv_sta, + struct ieee80211_local *local, + struct sta_info *sta) +{ + int i, j; + struct ieee80211_conf *conf = &local->hw.conf; + struct ieee80211_supported_band *sband; + struct iwl_priv *priv = (struct iwl_priv *)priv_rate; + struct iwl_lq_sta *lq_sta = priv_sta; + + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + + lq_sta->flush_timer = 0; + lq_sta->supp_rates = sta->supp_rates[sband->band]; + sta->txrate_idx = 3; + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); + + IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n"); + /* TODO: what is a good starting rate for STA? About middle? Maybe not + * the lowest or the highest rate.. Could consider using RSSI from + * previous packets? Need to have IEEE 802.1X auth succeed immediately + * after assoc.. */ + + lq_sta->ibss_sta_added = 0; + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + u8 sta_id = iwl_find_station(priv, sta->addr); + DECLARE_MAC_BUF(mac); + + /* for IBSS the call are from tasklet */ + IWL_DEBUG_RATE("LQ: ADD station %s\n", + print_mac(mac, sta->addr)); + + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_RATE("LQ: ADD station %s\n", + print_mac(mac, sta->addr)); + sta_id = iwl_add_station_flags(priv, sta->addr, + 0, CMD_ASYNC, NULL); + } + if ((sta_id != IWL_INVALID_STATION)) { + lq_sta->lq.sta_id = sta_id; + lq_sta->lq.rs_table[0].rate_n_flags = 0; + } + /* FIXME: this is w/a remove it later */ + priv->assoc_station_added = 1; + } + + /* Find highest tx rate supported by hardware and destination station */ + for (i = 0; i < sband->n_bitrates; i++) + if (sta->supp_rates[sband->band] & BIT(i)) + sta->txrate_idx = i; + + sta->last_txrate_idx = sta->txrate_idx; + /* WTF is with this bogus comment? A doesn't have cck rates */ + /* For MODE_IEEE80211A, cck rates are at end of rate table */ + if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) + sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; + + lq_sta->is_dup = 0; + lq_sta->is_green = rs_use_green(priv, conf); + lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000); + lq_sta->active_rate_basic = priv->active_rate_basic; + lq_sta->band = priv->band; + /* + * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), + * supp_rates[] does not; shift to convert format, force 9 MBits off. + */ + lq_sta->active_siso_rate = conf->ht_conf.supp_mcs_set[0] << 1; + lq_sta->active_siso_rate |= conf->ht_conf.supp_mcs_set[0] & 0x1; + lq_sta->active_siso_rate &= ~((u16)0x2); + lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; + + /* Same here */ + lq_sta->active_mimo2_rate = conf->ht_conf.supp_mcs_set[1] << 1; + lq_sta->active_mimo2_rate |= conf->ht_conf.supp_mcs_set[1] & 0x1; + lq_sta->active_mimo2_rate &= ~((u16)0x2); + lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; + + lq_sta->active_mimo3_rate = conf->ht_conf.supp_mcs_set[2] << 1; + lq_sta->active_mimo3_rate |= conf->ht_conf.supp_mcs_set[2] & 0x1; + lq_sta->active_mimo3_rate &= ~((u16)0x2); + lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; + + IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", + lq_sta->active_siso_rate, + lq_sta->active_mimo2_rate, + lq_sta->active_mimo3_rate); + + /* These values will be overriden later */ + lq_sta->lq.general_params.single_stream_ant_msk = ANT_A; + lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; + + /* as default allow aggregation for all tids */ + lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; + lq_sta->drv = priv; + + rs_initialize_lq(priv, conf, sta); +} + +static void rs_fill_link_cmd(const struct iwl_priv *priv, + struct iwl_lq_sta *lq_sta, u32 new_rate) +{ + struct iwl_scale_tbl_info tbl_type; + int index = 0; + int rate_idx; + int repeat_rate = 0; + u8 ant_toggle_cnt = 0; + u8 use_ht_possible = 1; + u8 valid_tx_ant = 0; + struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq; + + /* Override starting rate (index 0) if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Interpret new_rate (rate_n_flags) */ + memset(&tbl_type, 0, sizeof(tbl_type)); + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, + &tbl_type, &rate_idx); + + /* How many times should we repeat the initial rate? */ + if (is_legacy(tbl_type.lq_type)) { + ant_toggle_cnt = 1; + repeat_rate = IWL_NUMBER_TRY; + } else { + repeat_rate = IWL_HT_NUMBER_TRY; + } + + lq_cmd->general_params.mimo_delimiter = + is_mimo(tbl_type.lq_type) ? 1 : 0; + + /* Fill 1st table entry (index 0) */ + lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); + + if (num_of_ant(tbl_type.ant_type) == 1) { + lq_cmd->general_params.single_stream_ant_msk = + tbl_type.ant_type; + } else if (num_of_ant(tbl_type.ant_type) == 2) { + lq_cmd->general_params.dual_stream_ant_msk = + tbl_type.ant_type; + } /* otherwise we don't modify the existing value */ + + index++; + repeat_rate--; + + if (priv) + valid_tx_ant = priv->hw_params.valid_tx_ant; + + /* Fill rest of rate table */ + while (index < LINK_QUAL_MAX_RETRY_NUM) { + /* Repeat initial/next rate. + * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. + * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ + while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (priv && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; +} + + /* Override next rate if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Fill next table entry */ + lq_cmd->rs_table[index].rate_n_flags = + cpu_to_le32(new_rate); + repeat_rate--; + index++; + } + + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, + &rate_idx); + + /* Indicate to uCode which entries might be MIMO. + * If initial rate was MIMO, this will finally end up + * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ + if (is_mimo(tbl_type.lq_type)) + lq_cmd->general_params.mimo_delimiter = index; + + /* Get next rate */ + new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, + use_ht_possible); + + /* How many times should we repeat the next rate? */ + if (is_legacy(tbl_type.lq_type)) { + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (priv && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; + + repeat_rate = IWL_NUMBER_TRY; + } else { + repeat_rate = IWL_HT_NUMBER_TRY; + } + + /* Don't allow HT rates after next pass. + * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ + use_ht_possible = 0; + + /* Override next rate if needed for debug purposes */ + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + + /* Fill next table entry */ + lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); + + index++; + repeat_rate--; + } + + lq_cmd->agg_params.agg_frame_cnt_limit = 64; + lq_cmd->agg_params.agg_dis_start_th = 3; + lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000); +} + +static void *rs_alloc(struct ieee80211_local *local) +{ + return local->hw.priv; +} +/* rate scale requires free function to be implemented */ +static void rs_free(void *priv_rate) +{ + return; +} + +static void rs_clear(void *priv_rate) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_priv *priv = (struct iwl_priv *) priv_rate; + + IWL_DEBUG_RATE("enter\n"); + + /* TODO - add rate scale state reset */ + + IWL_DEBUG_RATE("leave\n"); +#endif /* CONFIG_IWLWIFI_DEBUG */ +} + +static void rs_free_sta(void *priv_rate, void *priv_sta) +{ + struct iwl_lq_sta *lq_sta = priv_sta; + struct iwl_priv *priv; + + priv = (struct iwl_priv *)priv_rate; + IWL_DEBUG_RATE("enter\n"); + kfree(lq_sta); + IWL_DEBUG_RATE("leave\n"); +} + + +#ifdef CONFIG_MAC80211_DEBUGFS +static int open_file_generic(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) +{ + struct iwl_priv *priv; + + priv = lq_sta->drv; + if (lq_sta->dbg_fixed_rate) { + if (index < 12) { + *rate_n_flags = lq_sta->dbg_fixed_rate; + } else { + if (lq_sta->band == IEEE80211_BAND_5GHZ) + *rate_n_flags = 0x800D; + else + *rate_n_flags = 0x820A; + } + IWL_DEBUG_RATE("Fixed rate ON\n"); + } else { + IWL_DEBUG_RATE("Fixed rate OFF\n"); + } +} + +static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + struct iwl_lq_sta *lq_sta = file->private_data; + struct iwl_priv *priv; + char buf[64]; + int buf_size; + u32 parsed_rate; + + priv = lq_sta->drv; + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + if (sscanf(buf, "%x", &parsed_rate) == 1) + lq_sta->dbg_fixed_rate = parsed_rate; + else + lq_sta->dbg_fixed_rate = 0; + + lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ + lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + + IWL_DEBUG_RATE("sta_id %d rate 0x%X\n", + lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); + + if (lq_sta->dbg_fixed_rate) { + rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); + iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC); + } + + return count; +} + +static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char buff[1024]; + int desc = 0; + int i = 0; + + struct iwl_lq_sta *lq_sta = file->private_data; + + desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); + desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", + lq_sta->total_failed, lq_sta->total_success, + lq_sta->active_legacy_rate); + desc += sprintf(buff+desc, "fixed rate 0x%X\n", + lq_sta->dbg_fixed_rate); + desc += sprintf(buff+desc, "general:" + "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", + lq_sta->lq.general_params.flags, + lq_sta->lq.general_params.mimo_delimiter, + lq_sta->lq.general_params.single_stream_ant_msk, + lq_sta->lq.general_params.dual_stream_ant_msk); + + desc += sprintf(buff+desc, "agg:" + "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", + le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), + lq_sta->lq.agg_params.agg_dis_start_th, + lq_sta->lq.agg_params.agg_frame_cnt_limit); + + desc += sprintf(buff+desc, + "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", + lq_sta->lq.general_params.start_rate_index[0], + lq_sta->lq.general_params.start_rate_index[1], + lq_sta->lq.general_params.start_rate_index[2], + lq_sta->lq.general_params.start_rate_index[3]); + + + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) + desc += sprintf(buff+desc, " rate[%d] 0x%X\n", + i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags)); + + return simple_read_from_buffer(user_buf, count, ppos, buff, desc); +} + +static const struct file_operations rs_sta_dbgfs_scale_table_ops = { + .write = rs_sta_dbgfs_scale_table_write, + .read = rs_sta_dbgfs_scale_table_read, + .open = open_file_generic, +}; +static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char buff[1024]; + int desc = 0; + int i, j; + + struct iwl_lq_sta *lq_sta = file->private_data; + for (i = 0; i < LQ_SIZE; i++) { + desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n" + "rate=0x%X\n", + lq_sta->active_tbl == i?"*":"x", + lq_sta->lq_info[i].lq_type, + lq_sta->lq_info[i].is_SGI, + lq_sta->lq_info[i].is_fat, + lq_sta->lq_info[i].is_dup, + lq_sta->lq_info[i].current_rate); + for (j = 0; j < IWL_RATE_COUNT; j++) { + desc += sprintf(buff+desc, + "counter=%d success=%d %%=%d\n", + lq_sta->lq_info[i].win[j].counter, + lq_sta->lq_info[i].win[j].success_counter, + lq_sta->lq_info[i].win[j].success_ratio); + } + } + return simple_read_from_buffer(user_buf, count, ppos, buff, desc); +} + +static const struct file_operations rs_sta_dbgfs_stats_table_ops = { + .read = rs_sta_dbgfs_stats_table_read, + .open = open_file_generic, +}; + +static void rs_add_debugfs(void *priv, void *priv_sta, + struct dentry *dir) +{ + struct iwl_lq_sta *lq_sta = priv_sta; + lq_sta->rs_sta_dbgfs_scale_table_file = + debugfs_create_file("rate_scale_table", 0600, dir, + lq_sta, &rs_sta_dbgfs_scale_table_ops); + lq_sta->rs_sta_dbgfs_stats_table_file = + debugfs_create_file("rate_stats_table", 0600, dir, + lq_sta, &rs_sta_dbgfs_stats_table_ops); + lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = + debugfs_create_u8("tx_agg_tid_enable", 0600, dir, + &lq_sta->tx_agg_tid_en); + +} + +static void rs_remove_debugfs(void *priv, void *priv_sta) +{ + struct iwl_lq_sta *lq_sta = priv_sta; + debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); + debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); +} +#endif + +static struct rate_control_ops rs_ops = { + .module = NULL, + .name = RS_NAME, + .tx_status = rs_tx_status, + .get_rate = rs_get_rate, + .rate_init = rs_rate_init, + .clear = rs_clear, + .alloc = rs_alloc, + .free = rs_free, + .alloc_sta = rs_alloc_sta, + .free_sta = rs_free_sta, +#ifdef CONFIG_MAC80211_DEBUGFS + .add_sta_debugfs = rs_add_debugfs, + .remove_sta_debugfs = rs_remove_debugfs, +#endif +}; + +int iwlagn_rate_control_register(void) +{ + return ieee80211_rate_control_register(&rs_ops); +} + +void iwlagn_rate_control_unregister(void) +{ + ieee80211_rate_control_unregister(&rs_ops); +} + diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h new file mode 100644 index 0000000..84d4d1e --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h @@ -0,0 +1,309 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#ifndef __iwl_agn_rs_h__ +#define __iwl_agn_rs_h__ + +#include "iwl-dev.h" + +struct iwl_rate_info { + u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ + u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ + u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ + u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ + u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ + u8 prev_ieee; /* previous rate in IEEE speeds */ + u8 next_ieee; /* next rate in IEEE speeds */ + u8 prev_rs; /* previous rate used in rs algo */ + u8 next_rs; /* next rate used in rs algo */ + u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ + u8 next_rs_tgg; /* next rate used in TGG rs algo */ +}; + +/* + * These serve as indexes into + * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; + */ +enum { + IWL_RATE_1M_INDEX = 0, + IWL_RATE_2M_INDEX, + IWL_RATE_5M_INDEX, + IWL_RATE_11M_INDEX, + IWL_RATE_6M_INDEX, + IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, + IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, + IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, + IWL_RATE_54M_INDEX, + IWL_RATE_60M_INDEX, + IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/ + IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, + IWL_RATE_INVALID = IWL_RATE_COUNT, +}; + +enum { + IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, + IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, + IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, + IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, +}; + +/* #define vs. enum to keep from defaulting to 'large integer' */ +#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX) +#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX) +#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX) +#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX) +#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX) +#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX) +#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX) +#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX) +#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX) +#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX) +#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX) +#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) +#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) + +/* uCode API values for legacy bit rates, both OFDM and CCK */ +enum { + IWL_RATE_6M_PLCP = 13, + IWL_RATE_9M_PLCP = 15, + IWL_RATE_12M_PLCP = 5, + IWL_RATE_18M_PLCP = 7, + IWL_RATE_24M_PLCP = 9, + IWL_RATE_36M_PLCP = 11, + IWL_RATE_48M_PLCP = 1, + IWL_RATE_54M_PLCP = 3, + IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/ + IWL_RATE_1M_PLCP = 10, + IWL_RATE_2M_PLCP = 20, + IWL_RATE_5M_PLCP = 55, + IWL_RATE_11M_PLCP = 110, + /*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */ + /*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/ +}; + +/* uCode API values for OFDM high-throughput (HT) bit rates */ +enum { + IWL_RATE_SISO_6M_PLCP = 0, + IWL_RATE_SISO_12M_PLCP = 1, + IWL_RATE_SISO_18M_PLCP = 2, + IWL_RATE_SISO_24M_PLCP = 3, + IWL_RATE_SISO_36M_PLCP = 4, + IWL_RATE_SISO_48M_PLCP = 5, + IWL_RATE_SISO_54M_PLCP = 6, + IWL_RATE_SISO_60M_PLCP = 7, + IWL_RATE_MIMO2_6M_PLCP = 0x8, + IWL_RATE_MIMO2_12M_PLCP = 0x9, + IWL_RATE_MIMO2_18M_PLCP = 0xa, + IWL_RATE_MIMO2_24M_PLCP = 0xb, + IWL_RATE_MIMO2_36M_PLCP = 0xc, + IWL_RATE_MIMO2_48M_PLCP = 0xd, + IWL_RATE_MIMO2_54M_PLCP = 0xe, + IWL_RATE_MIMO2_60M_PLCP = 0xf, + IWL_RATE_MIMO3_6M_PLCP = 0x10, + IWL_RATE_MIMO3_12M_PLCP = 0x11, + IWL_RATE_MIMO3_18M_PLCP = 0x12, + IWL_RATE_MIMO3_24M_PLCP = 0x13, + IWL_RATE_MIMO3_36M_PLCP = 0x14, + IWL_RATE_MIMO3_48M_PLCP = 0x15, + IWL_RATE_MIMO3_54M_PLCP = 0x16, + IWL_RATE_MIMO3_60M_PLCP = 0x17, + IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, +}; + +/* MAC header values for bit rates */ +enum { + IWL_RATE_6M_IEEE = 12, + IWL_RATE_9M_IEEE = 18, + IWL_RATE_12M_IEEE = 24, + IWL_RATE_18M_IEEE = 36, + IWL_RATE_24M_IEEE = 48, + IWL_RATE_36M_IEEE = 72, + IWL_RATE_48M_IEEE = 96, + IWL_RATE_54M_IEEE = 108, + IWL_RATE_60M_IEEE = 120, + IWL_RATE_1M_IEEE = 2, + IWL_RATE_2M_IEEE = 4, + IWL_RATE_5M_IEEE = 11, + IWL_RATE_11M_IEEE = 22, +}; + +#define IWL_CCK_BASIC_RATES_MASK \ + (IWL_RATE_1M_MASK | \ + IWL_RATE_2M_MASK) + +#define IWL_CCK_RATES_MASK \ + (IWL_BASIC_RATES_MASK | \ + IWL_RATE_5M_MASK | \ + IWL_RATE_11M_MASK) + +#define IWL_OFDM_BASIC_RATES_MASK \ + (IWL_RATE_6M_MASK | \ + IWL_RATE_12M_MASK | \ + IWL_RATE_24M_MASK) + +#define IWL_OFDM_RATES_MASK \ + (IWL_OFDM_BASIC_RATES_MASK | \ + IWL_RATE_9M_MASK | \ + IWL_RATE_18M_MASK | \ + IWL_RATE_36M_MASK | \ + IWL_RATE_48M_MASK | \ + IWL_RATE_54M_MASK) + +#define IWL_BASIC_RATES_MASK \ + (IWL_OFDM_BASIC_RATES_MASK | \ + IWL_CCK_BASIC_RATES_MASK) + +#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) + +#define IWL_INVALID_VALUE -1 + +#define IWL_MIN_RSSI_VAL -100 +#define IWL_MAX_RSSI_VAL 0 + +/* These values specify how many Tx frame attempts before + * searching for a new modulation mode */ +#define IWL_LEGACY_FAILURE_LIMIT 160 +#define IWL_LEGACY_SUCCESS_LIMIT 480 +#define IWL_LEGACY_TABLE_COUNT 160 + +#define IWL_NONE_LEGACY_FAILURE_LIMIT 400 +#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500 +#define IWL_NONE_LEGACY_TABLE_COUNT 1500 + +/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ +#define IWL_RS_GOOD_RATIO 12800 /* 100% */ +#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */ +#define IWL_RATE_HIGH_TH 10880 /* 85% */ +#define IWL_RATE_INCREASE_TH 8960 /* 70% */ +#define IWL_RATE_DECREASE_TH 1920 /* 15% */ + +/* possible actions when in legacy mode */ +#define IWL_LEGACY_SWITCH_ANTENNA 0 +#define IWL_LEGACY_SWITCH_SISO 1 +#define IWL_LEGACY_SWITCH_MIMO2 2 + +/* possible actions when in siso mode */ +#define IWL_SISO_SWITCH_ANTENNA 0 +#define IWL_SISO_SWITCH_MIMO2 1 +#define IWL_SISO_SWITCH_GI 2 + +/* possible actions when in mimo mode */ +#define IWL_MIMO_SWITCH_ANTENNA_A 0 +#define IWL_MIMO_SWITCH_ANTENNA_B 1 +#define IWL_MIMO_SWITCH_GI 2 + +/*FIXME:RS:separate MIMO2/3 transitions*/ + +/*FIXME:RS:add posible acctions for MIMO3*/ + +#define IWL_ACTION_LIMIT 3 /* # possible actions */ + +#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ + +/* load per tid defines for A-MPDU activation */ +#define IWL_AGG_TPT_THREHOLD 0 +#define IWL_AGG_LOAD_THRESHOLD 10 +#define IWL_AGG_ALL_TID 0xff +#define TID_QUEUE_CELL_SPACING 50 /*mS */ +#define TID_QUEUE_MAX_SIZE 20 +#define TID_ROUND_VALUE 5 /* mS */ +#define TID_MAX_LOAD_COUNT 8 + +#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) +#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) + +extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; + +enum iwl_table_type { + LQ_NONE, + LQ_G, /* legacy types */ + LQ_A, + LQ_SISO, /* high-throughput types */ + LQ_MIMO2, + LQ_MIMO3, + LQ_MAX, +}; + +#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) +#define is_siso(tbl) ((tbl) == LQ_SISO) +#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) +#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) +#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) +#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) +#define is_a_band(tbl) ((tbl) == LQ_A) +#define is_g_and(tbl) ((tbl) == LQ_G) + +#define ANT_NONE 0x0 +#define ANT_A BIT(0) +#define ANT_B BIT(1) +#define ANT_AB (ANT_A | ANT_B) +#define ANT_C BIT(2) +#define ANT_AC (ANT_A | ANT_C) +#define ANT_BC (ANT_B | ANT_C) +#define ANT_ABC (ANT_AB | ANT_C) + +static inline u8 num_of_ant(u8 mask) +{ + return !!((mask) & ANT_A) + + !!((mask) & ANT_B) + + !!((mask) & ANT_C); +} + +static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index) +{ + u8 rate = iwl_rates[rate_index].prev_ieee; + + if (rate == IWL_RATE_INVALID) + rate = rate_index; + return rate; +} + +/** + * iwl4965_rate_control_register - Register the rate control algorithm callbacks + * + * Since the rate control algorithm is hardware specific, there is no need + * or reason to place it as a stand alone module. The driver can call + * iwl4965_rate_control_register in order to register the rate control callbacks + * with the mac80211 subsystem. This should be performed prior to calling + * ieee80211_register_hw + * + */ +extern int iwlagn_rate_control_register(void); + +/** + * iwl4965_rate_control_unregister - Unregister the rate control callbacks + * + * This should be called after calling ieee80211_unregister_hw, but before + * the driver is unloaded. + */ +extern void iwlagn_rate_control_unregister(void); + +#endif /* __iwl_agn__rs__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c new file mode 100644 index 0000000..c8a16b2 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -0,0 +1,4544 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> + +#include <linux/ieee80211.h> +#include <net/mac80211.h> + +#include <asm/div64.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-io.h" +#include "iwl-helpers.h" +#include "iwl-sta.h" +#include "iwl-calib.h" + + +/****************************************************************************** + * + * module boiler plate + * + ******************************************************************************/ + +/* + * module name, copyright, version, etc. + * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk + */ + +#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" + +#ifdef CONFIG_IWLWIFI_DEBUG +#define VD "d" +#else +#define VD +#endif + +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT +#define VS "s" +#else +#define VS +#endif + +#define DRV_VERSION IWLWIFI_VERSION VD VS + + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR(DRV_COPYRIGHT); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("iwl4965"); + +/*************** STATION TABLE MANAGEMENT **** + * mac80211 should be examined to determine if sta_info is duplicating + * the functionality provided here + */ + +/**************************************************************/ + + + +static void iwl4965_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt) +{ + struct iwl_rxon_cmd *rxon = &priv->staging_rxon; + + if (hw_decrypt) + rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; + else + rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; + +} + +/** + * iwl4965_check_rxon_cmd - validate RXON structure is valid + * + * NOTE: This is really only useful during development and can eventually + * be #ifdef'd out once the driver is stable and folks aren't actively + * making changes + */ +static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon) +{ + int error = 0; + int counter = 1; + + if (rxon->flags & RXON_FLG_BAND_24G_MSK) { + error |= le32_to_cpu(rxon->flags & + (RXON_FLG_TGJ_NARROW_BAND_MSK | + RXON_FLG_RADAR_DETECT_MSK)); + if (error) + IWL_WARNING("check 24G fields %d | %d\n", + counter++, error); + } else { + error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ? + 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK); + if (error) + IWL_WARNING("check 52 fields %d | %d\n", + counter++, error); + error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK); + if (error) + IWL_WARNING("check 52 CCK %d | %d\n", + counter++, error); + } + error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1; + if (error) + IWL_WARNING("check mac addr %d | %d\n", counter++, error); + + /* make sure basic rates 6Mbps and 1Mbps are supported */ + error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) && + ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0)); + if (error) + IWL_WARNING("check basic rate %d | %d\n", counter++, error); + + error |= (le16_to_cpu(rxon->assoc_id) > 2007); + if (error) + IWL_WARNING("check assoc id %d | %d\n", counter++, error); + + error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) + == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)); + if (error) + IWL_WARNING("check CCK and short slot %d | %d\n", + counter++, error); + + error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) + == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)); + if (error) + IWL_WARNING("check CCK & auto detect %d | %d\n", + counter++, error); + + error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | + RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK); + if (error) + IWL_WARNING("check TGG and auto detect %d | %d\n", + counter++, error); + + if (error) + IWL_WARNING("Tuning to channel %d\n", + le16_to_cpu(rxon->channel)); + + if (error) { + IWL_ERROR("Not a valid iwl4965_rxon_assoc_cmd field values\n"); + return -1; + } + return 0; +} + +/** + * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed + * @priv: staging_rxon is compared to active_rxon + * + * If the RXON structure is changing enough to require a new tune, + * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that + * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. + */ +static int iwl_full_rxon_required(struct iwl_priv *priv) +{ + + /* These items are only settable from the full RXON command */ + if (!(iwl_is_associated(priv)) || + compare_ether_addr(priv->staging_rxon.bssid_addr, + priv->active_rxon.bssid_addr) || + compare_ether_addr(priv->staging_rxon.node_addr, + priv->active_rxon.node_addr) || + compare_ether_addr(priv->staging_rxon.wlap_bssid_addr, + priv->active_rxon.wlap_bssid_addr) || + (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) || + (priv->staging_rxon.channel != priv->active_rxon.channel) || + (priv->staging_rxon.air_propagation != + priv->active_rxon.air_propagation) || + (priv->staging_rxon.ofdm_ht_single_stream_basic_rates != + priv->active_rxon.ofdm_ht_single_stream_basic_rates) || + (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != + priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || + (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) + return 1; + + /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can + * be updated with the RXON_ASSOC command -- however only some + * flag transitions are allowed using RXON_ASSOC */ + + /* Check if we are not switching bands */ + if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) != + (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)) + return 1; + + /* Check if we are switching association toggle */ + if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) != + (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) + return 1; + + return 0; +} + +/** + * iwl4965_commit_rxon - commit staging_rxon to hardware + * + * The RXON command in staging_rxon is committed to the hardware and + * the active_rxon structure is updated with the new data. This + * function correctly transitions out of the RXON_ASSOC_MSK state if + * a HW tune is required based on the RXON structure changes. + */ +static int iwl4965_commit_rxon(struct iwl_priv *priv) +{ + /* cast away the const for active_rxon in this function */ + struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon; + DECLARE_MAC_BUF(mac); + int ret; + bool new_assoc = + !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK); + + if (!iwl_is_alive(priv)) + return -EBUSY; + + /* always get timestamp with Rx frame */ + priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK; + /* allow CTS-to-self if possible. this is relevant only for + * 5000, but will not damage 4965 */ + priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; + + ret = iwl4965_check_rxon_cmd(&priv->staging_rxon); + if (ret) { + IWL_ERROR("Invalid RXON configuration. Not committing.\n"); + return -EINVAL; + } + + /* If we don't need to send a full RXON, we can use + * iwl4965_rxon_assoc_cmd which is used to reconfigure filter + * and other flags for the current radio configuration. */ + if (!iwl_full_rxon_required(priv)) { + ret = iwl_send_rxon_assoc(priv); + if (ret) { + IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret); + return ret; + } + + memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); + return 0; + } + + /* station table will be cleared */ + priv->assoc_station_added = 0; + + /* If we are currently associated and the new config requires + * an RXON_ASSOC and the new config wants the associated mask enabled, + * we must clear the associated from the active configuration + * before we apply the new config */ + if (iwl_is_associated(priv) && new_assoc) { + IWL_DEBUG_INFO("Toggling associated bit on current RXON\n"); + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + + ret = iwl_send_cmd_pdu(priv, REPLY_RXON, + sizeof(struct iwl_rxon_cmd), + &priv->active_rxon); + + /* If the mask clearing failed then we set + * active_rxon back to what it was previously */ + if (ret) { + active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; + IWL_ERROR("Error clearing ASSOC_MSK (%d)\n", ret); + return ret; + } + } + + IWL_DEBUG_INFO("Sending RXON\n" + "* with%s RXON_FILTER_ASSOC_MSK\n" + "* channel = %d\n" + "* bssid = %s\n", + (new_assoc ? "" : "out"), + le16_to_cpu(priv->staging_rxon.channel), + print_mac(mac, priv->staging_rxon.bssid_addr)); + + iwl4965_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto); + + /* Apply the new configuration + * RXON unassoc clears the station table in uCode, send it before + * we add the bcast station. If assoc bit is set, we will send RXON + * after having added the bcast and bssid station. + */ + if (!new_assoc) { + ret = iwl_send_cmd_pdu(priv, REPLY_RXON, + sizeof(struct iwl_rxon_cmd), &priv->staging_rxon); + if (ret) { + IWL_ERROR("Error setting new RXON (%d)\n", ret); + return ret; + } + memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); + } + + iwl_clear_stations_table(priv); + + if (!priv->error_recovering) + priv->start_calib = 0; + + /* Add the broadcast address so we can send broadcast frames */ + if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) == + IWL_INVALID_STATION) { + IWL_ERROR("Error adding BROADCAST address for transmit.\n"); + return -EIO; + } + + /* If we have set the ASSOC_MSK and we are in BSS mode then + * add the IWL_AP_ID to the station rate table */ + if (new_assoc) { + if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { + ret = iwl_rxon_add_station(priv, + priv->active_rxon.bssid_addr, 1); + if (ret == IWL_INVALID_STATION) { + IWL_ERROR("Error adding AP address for TX.\n"); + return -EIO; + } + priv->assoc_station_added = 1; + if (priv->default_wep_key && + iwl_send_static_wepkey_cmd(priv, 0)) + IWL_ERROR("Could not send WEP static key.\n"); + } + + /* Apply the new configuration + * RXON assoc doesn't clear the station table in uCode, + */ + ret = iwl_send_cmd_pdu(priv, REPLY_RXON, + sizeof(struct iwl_rxon_cmd), &priv->staging_rxon); + if (ret) { + IWL_ERROR("Error setting new RXON (%d)\n", ret); + return ret; + } + memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); + } + + iwl_init_sensitivity(priv); + + /* If we issue a new RXON command which required a tune then we must + * send a new TXPOWER command or we won't be able to Tx any frames */ + ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); + if (ret) { + IWL_ERROR("Error sending TX power (%d)\n", ret); + return ret; + } + + return 0; +} + +void iwl4965_update_chain_flags(struct iwl_priv *priv) +{ + + iwl_set_rxon_chain(priv); + iwl4965_commit_rxon(priv); +} + +static int iwl4965_send_bt_config(struct iwl_priv *priv) +{ + struct iwl4965_bt_cmd bt_cmd = { + .flags = 3, + .lead_time = 0xAA, + .max_kill = 1, + .kill_ack_mask = 0, + .kill_cts_mask = 0, + }; + + return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, + sizeof(struct iwl4965_bt_cmd), &bt_cmd); +} + +static void iwl_clear_free_frames(struct iwl_priv *priv) +{ + struct list_head *element; + + IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n", + priv->frames_count); + + while (!list_empty(&priv->free_frames)) { + element = priv->free_frames.next; + list_del(element); + kfree(list_entry(element, struct iwl_frame, list)); + priv->frames_count--; + } + + if (priv->frames_count) { + IWL_WARNING("%d frames still in use. Did we lose one?\n", + priv->frames_count); + priv->frames_count = 0; + } +} + +static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv) +{ + struct iwl_frame *frame; + struct list_head *element; + if (list_empty(&priv->free_frames)) { + frame = kzalloc(sizeof(*frame), GFP_KERNEL); + if (!frame) { + IWL_ERROR("Could not allocate frame!\n"); + return NULL; + } + + priv->frames_count++; + return frame; + } + + element = priv->free_frames.next; + list_del(element); + return list_entry(element, struct iwl_frame, list); +} + +static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame) +{ + memset(frame, 0, sizeof(*frame)); + list_add(&frame->list, &priv->free_frames); +} + +static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + const u8 *dest, int left) +{ + if (!iwl_is_associated(priv) || !priv->ibss_beacon || + ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) && + (priv->iw_mode != IEEE80211_IF_TYPE_AP))) + return 0; + + if (priv->ibss_beacon->len > left) + return 0; + + memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len); + + return priv->ibss_beacon->len; +} + +static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv) +{ + int i; + int rate_mask; + + /* Set rate mask*/ + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) + rate_mask = priv->active_rate_basic & 0xF; + else + rate_mask = priv->active_rate_basic & 0xFF0; + + /* Find lowest valid rate */ + for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; + i = iwl_rates[i].next_ieee) { + if (rate_mask & (1 << i)) + return iwl_rates[i].plcp; + } + + /* No valid rate was found. Assign the lowest one */ + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) + return IWL_RATE_1M_PLCP; + else + return IWL_RATE_6M_PLCP; +} + +unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, + struct iwl_frame *frame, u8 rate) +{ + struct iwl_tx_beacon_cmd *tx_beacon_cmd; + unsigned int frame_size; + + tx_beacon_cmd = &frame->u.beacon; + memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); + + tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id; + tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame, + iwl_bcast_addr, + sizeof(frame->u) - sizeof(*tx_beacon_cmd)); + + BUG_ON(frame_size > MAX_MPDU_SIZE); + tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); + + if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP)) + tx_beacon_cmd->tx.rate_n_flags = + iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK); + else + tx_beacon_cmd->tx.rate_n_flags = + iwl_hw_set_rate_n_flags(rate, 0); + + tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | + TX_CMD_FLG_TSF_MSK | + TX_CMD_FLG_STA_RATE_MSK; + + return sizeof(*tx_beacon_cmd) + frame_size; +} +static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) +{ + struct iwl_frame *frame; + unsigned int frame_size; + int rc; + u8 rate; + + frame = iwl_get_free_frame(priv); + + if (!frame) { + IWL_ERROR("Could not obtain free frame buffer for beacon " + "command.\n"); + return -ENOMEM; + } + + rate = iwl4965_rate_get_lowest_plcp(priv); + + frame_size = iwl4965_hw_get_beacon_cmd(priv, frame, rate); + + rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, + &frame->u.cmd[0]); + + iwl_free_frame(priv, frame); + + return rc; +} + +/****************************************************************************** + * + * Misc. internal state and helper functions + * + ******************************************************************************/ + +static void iwl4965_ht_conf(struct iwl_priv *priv, + struct ieee80211_bss_conf *bss_conf) +{ + struct ieee80211_ht_info *ht_conf = bss_conf->ht_conf; + struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf; + struct iwl_ht_info *iwl_conf = &priv->current_ht_config; + + IWL_DEBUG_MAC80211("enter: \n"); + + iwl_conf->is_ht = bss_conf->assoc_ht; + + if (!iwl_conf->is_ht) + return; + + priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); + + if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20) + iwl_conf->sgf |= HT_SHORT_GI_20MHZ; + if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40) + iwl_conf->sgf |= HT_SHORT_GI_40MHZ; + + iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD); + iwl_conf->max_amsdu_size = + !!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU); + + iwl_conf->supported_chan_width = + !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH); + iwl_conf->extension_chan_offset = + ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET; + /* If no above or below channel supplied disable FAT channel */ + if (iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_ABOVE && + iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_BELOW) { + iwl_conf->extension_chan_offset = IEEE80211_HT_IE_CHA_SEC_NONE; + iwl_conf->supported_chan_width = 0; + } + + memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); + + iwl_conf->control_channel = ht_bss_conf->primary_channel; + iwl_conf->tx_chan_width = + !!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH); + iwl_conf->ht_protection = + ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION; + iwl_conf->non_GF_STA_present = + !!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT); + + IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel); + IWL_DEBUG_MAC80211("leave\n"); +} + +/* + * QoS support +*/ +static void iwl_activate_qos(struct iwl_priv *priv, u8 force) +{ + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (!priv->qos_data.qos_enable) + return; + + priv->qos_data.def_qos_parm.qos_flags = 0; + + if (priv->qos_data.qos_cap.q_AP.queue_request && + !priv->qos_data.qos_cap.q_AP.txop_request) + priv->qos_data.def_qos_parm.qos_flags |= + QOS_PARAM_FLG_TXOP_TYPE_MSK; + if (priv->qos_data.qos_active) + priv->qos_data.def_qos_parm.qos_flags |= + QOS_PARAM_FLG_UPDATE_EDCA_MSK; + + if (priv->current_ht_config.is_ht) + priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; + + if (force || iwl_is_associated(priv)) { + IWL_DEBUG_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n", + priv->qos_data.qos_active, + priv->qos_data.def_qos_parm.qos_flags); + + iwl_send_cmd_pdu_async(priv, REPLY_QOS_PARAM, + sizeof(struct iwl_qosparam_cmd), + &priv->qos_data.def_qos_parm, NULL); + } +} + +#define MAX_UCODE_BEACON_INTERVAL 4096 +#define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA) + +static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val) +{ + u16 new_val = 0; + u16 beacon_factor = 0; + + beacon_factor = + (beacon_val + MAX_UCODE_BEACON_INTERVAL) + / MAX_UCODE_BEACON_INTERVAL; + new_val = beacon_val / beacon_factor; + + return cpu_to_le16(new_val); +} + +static void iwl4965_setup_rxon_timing(struct iwl_priv *priv) +{ + u64 interval_tm_unit; + u64 tsf, result; + unsigned long flags; + struct ieee80211_conf *conf = NULL; + u16 beacon_int = 0; + + conf = ieee80211_get_hw_conf(priv->hw); + + spin_lock_irqsave(&priv->lock, flags); + priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp >> 32); + priv->rxon_timing.timestamp.dw[0] = + cpu_to_le32(priv->timestamp & 0xFFFFFFFF); + + priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL; + + tsf = priv->timestamp; + + beacon_int = priv->beacon_int; + spin_unlock_irqrestore(&priv->lock, flags); + + if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { + if (beacon_int == 0) { + priv->rxon_timing.beacon_interval = cpu_to_le16(100); + priv->rxon_timing.beacon_init_val = cpu_to_le32(102400); + } else { + priv->rxon_timing.beacon_interval = + cpu_to_le16(beacon_int); + priv->rxon_timing.beacon_interval = + iwl4965_adjust_beacon_interval( + le16_to_cpu(priv->rxon_timing.beacon_interval)); + } + + priv->rxon_timing.atim_window = 0; + } else { + priv->rxon_timing.beacon_interval = + iwl4965_adjust_beacon_interval(conf->beacon_int); + /* TODO: we need to get atim_window from upper stack + * for now we set to 0 */ + priv->rxon_timing.atim_window = 0; + } + + interval_tm_unit = + (le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024); + result = do_div(tsf, interval_tm_unit); + priv->rxon_timing.beacon_init_val = + cpu_to_le32((u32) ((u64) interval_tm_unit - result)); + + IWL_DEBUG_ASSOC + ("beacon interval %d beacon timer %d beacon tim %d\n", + le16_to_cpu(priv->rxon_timing.beacon_interval), + le32_to_cpu(priv->rxon_timing.beacon_init_val), + le16_to_cpu(priv->rxon_timing.atim_window)); +} + +static void iwl_set_flags_for_band(struct iwl_priv *priv, + enum ieee80211_band band) +{ + if (band == IEEE80211_BAND_5GHZ) { + priv->staging_rxon.flags &= + ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK + | RXON_FLG_CCK_MSK); + priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; + } else { + /* Copied from iwl4965_post_associate() */ + if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) + priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; + priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK; + priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK; + } +} + +/* + * initialize rxon structure with default values from eeprom + */ +static void iwl4965_connection_init_rx_config(struct iwl_priv *priv) +{ + const struct iwl_channel_info *ch_info; + + memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); + + switch (priv->iw_mode) { + case IEEE80211_IF_TYPE_AP: + priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP; + break; + + case IEEE80211_IF_TYPE_STA: + priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS; + priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; + break; + + case IEEE80211_IF_TYPE_IBSS: + priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS; + priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK; + priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK | + RXON_FILTER_ACCEPT_GRP_MSK; + break; + + case IEEE80211_IF_TYPE_MNTR: + priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER; + priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK | + RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK; + break; + default: + IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode); + break; + } + +#if 0 + /* TODO: Figure out when short_preamble would be set and cache from + * that */ + if (!hw_to_local(priv->hw)->short_preamble) + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; +#endif + + ch_info = iwl_get_channel_info(priv, priv->band, + le16_to_cpu(priv->active_rxon.channel)); + + if (!ch_info) + ch_info = &priv->channel_info[0]; + + /* + * in some case A channels are all non IBSS + * in this case force B/G channel + */ + if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && + !(is_channel_ibss(ch_info))) + ch_info = &priv->channel_info[0]; + + priv->staging_rxon.channel = cpu_to_le16(ch_info->channel); + priv->band = ch_info->band; + + iwl_set_flags_for_band(priv, priv->band); + + priv->staging_rxon.ofdm_basic_rates = + (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; + priv->staging_rxon.cck_basic_rates = + (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; + + priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | + RXON_FLG_CHANNEL_MODE_PURE_40_MSK); + memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); + memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN); + priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff; + priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff; + iwl_set_rxon_chain(priv); +} + +static int iwl4965_set_mode(struct iwl_priv *priv, int mode) +{ + priv->iw_mode = mode; + + iwl4965_connection_init_rx_config(priv); + memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); + + iwl_clear_stations_table(priv); + + /* dont commit rxon if rf-kill is on*/ + if (!iwl_is_ready_rf(priv)) + return -EAGAIN; + + cancel_delayed_work(&priv->scan_check); + if (iwl_scan_cancel_timeout(priv, 100)) { + IWL_WARNING("Aborted scan still in progress after 100ms\n"); + IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); + return -EAGAIN; + } + + iwl4965_commit_rxon(priv); + + return 0; +} + +static void iwl4965_set_rate(struct iwl_priv *priv) +{ + const struct ieee80211_supported_band *hw = NULL; + struct ieee80211_rate *rate; + int i; + + hw = iwl_get_hw_mode(priv, priv->band); + if (!hw) { + IWL_ERROR("Failed to set rate: unable to get hw mode\n"); + return; + } + + priv->active_rate = 0; + priv->active_rate_basic = 0; + + for (i = 0; i < hw->n_bitrates; i++) { + rate = &(hw->bitrates[i]); + if (rate->hw_value < IWL_RATE_COUNT) + priv->active_rate |= (1 << rate->hw_value); + } + + IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n", + priv->active_rate, priv->active_rate_basic); + + /* + * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK) + * otherwise set it to the default of all CCK rates and 6, 12, 24 for + * OFDM + */ + if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK) + priv->staging_rxon.cck_basic_rates = + ((priv->active_rate_basic & + IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF; + else + priv->staging_rxon.cck_basic_rates = + (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; + + if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK) + priv->staging_rxon.ofdm_basic_rates = + ((priv->active_rate_basic & + (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >> + IWL_FIRST_OFDM_RATE) & 0xFF; + else + priv->staging_rxon.ofdm_basic_rates = + (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; +} + +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT + +#include "iwl-spectrum.h" + +#define BEACON_TIME_MASK_LOW 0x00FFFFFF +#define BEACON_TIME_MASK_HIGH 0xFF000000 +#define TIME_UNIT 1024 + +/* + * extended beacon time format + * time in usec will be changed into a 32-bit value in 8:24 format + * the high 1 byte is the beacon counts + * the lower 3 bytes is the time in usec within one beacon interval + */ + +static u32 iwl4965_usecs_to_beacons(u32 usec, u32 beacon_interval) +{ + u32 quot; + u32 rem; + u32 interval = beacon_interval * 1024; + + if (!interval || !usec) + return 0; + + quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24); + rem = (usec % interval) & BEACON_TIME_MASK_LOW; + + return (quot << 24) + rem; +} + +/* base is usually what we get from ucode with each received frame, + * the same as HW timer counter counting down + */ + +static __le32 iwl4965_add_beacon_time(u32 base, u32 addon, u32 beacon_interval) +{ + u32 base_low = base & BEACON_TIME_MASK_LOW; + u32 addon_low = addon & BEACON_TIME_MASK_LOW; + u32 interval = beacon_interval * TIME_UNIT; + u32 res = (base & BEACON_TIME_MASK_HIGH) + + (addon & BEACON_TIME_MASK_HIGH); + + if (base_low > addon_low) + res += base_low - addon_low; + else if (base_low < addon_low) { + res += interval + base_low - addon_low; + res += (1 << 24); + } else + res += (1 << 24); + + return cpu_to_le32(res); +} + +static int iwl4965_get_measurement(struct iwl_priv *priv, + struct ieee80211_measurement_params *params, + u8 type) +{ + struct iwl4965_spectrum_cmd spectrum; + struct iwl_rx_packet *res; + struct iwl_host_cmd cmd = { + .id = REPLY_SPECTRUM_MEASUREMENT_CMD, + .data = (void *)&spectrum, + .meta.flags = CMD_WANT_SKB, + }; + u32 add_time = le64_to_cpu(params->start_time); + int rc; + int spectrum_resp_status; + int duration = le16_to_cpu(params->duration); + + if (iwl_is_associated(priv)) + add_time = + iwl4965_usecs_to_beacons( + le64_to_cpu(params->start_time) - priv->last_tsf, + le16_to_cpu(priv->rxon_timing.beacon_interval)); + + memset(&spectrum, 0, sizeof(spectrum)); + + spectrum.channel_count = cpu_to_le16(1); + spectrum.flags = + RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; + spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; + cmd.len = sizeof(spectrum); + spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); + + if (iwl_is_associated(priv)) + spectrum.start_time = + iwl4965_add_beacon_time(priv->last_beacon_time, + add_time, + le16_to_cpu(priv->rxon_timing.beacon_interval)); + else + spectrum.start_time = 0; + + spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); + spectrum.channels[0].channel = params->channel; + spectrum.channels[0].type = type; + if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK) + spectrum.flags |= RXON_FLG_BAND_24G_MSK | + RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK; + + rc = iwl_send_cmd_sync(priv, &cmd); + if (rc) + return rc; + + res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; + if (res->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n"); + rc = -EIO; + } + + spectrum_resp_status = le16_to_cpu(res->u.spectrum.status); + switch (spectrum_resp_status) { + case 0: /* Command will be handled */ + if (res->u.spectrum.id != 0xff) { + IWL_DEBUG_INFO + ("Replaced existing measurement: %d\n", + res->u.spectrum.id); + priv->measurement_status &= ~MEASUREMENT_READY; + } + priv->measurement_status |= MEASUREMENT_ACTIVE; + rc = 0; + break; + + case 1: /* Command will not be handled */ + rc = -EAGAIN; + break; + } + + dev_kfree_skb_any(cmd.meta.u.skb); + + return rc; +} +#endif + +/****************************************************************************** + * + * Generic RX handler implementations + * + ******************************************************************************/ +static void iwl_rx_reply_alive(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_alive_resp *palive; + struct work_struct *pwork; + + palive = &pkt->u.alive_frame; + + IWL_DEBUG_INFO("Alive ucode status 0x%08X revision " + "0x%01X 0x%01X\n", + palive->is_valid, palive->ver_type, + palive->ver_subtype); + + if (palive->ver_subtype == INITIALIZE_SUBTYPE) { + IWL_DEBUG_INFO("Initialization Alive received.\n"); + memcpy(&priv->card_alive_init, + &pkt->u.alive_frame, + sizeof(struct iwl_init_alive_resp)); + pwork = &priv->init_alive_start; + } else { + IWL_DEBUG_INFO("Runtime Alive received.\n"); + memcpy(&priv->card_alive, &pkt->u.alive_frame, + sizeof(struct iwl_alive_resp)); + pwork = &priv->alive_start; + } + + /* We delay the ALIVE response by 5ms to + * give the HW RF Kill time to activate... */ + if (palive->is_valid == UCODE_VALID_OK) + queue_delayed_work(priv->workqueue, pwork, + msecs_to_jiffies(5)); + else + IWL_WARNING("uCode did not respond OK.\n"); +} + +static void iwl4965_rx_reply_error(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + + IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) " + "seq 0x%04X ser 0x%08X\n", + le32_to_cpu(pkt->u.err_resp.error_type), + get_cmd_string(pkt->u.err_resp.cmd_id), + pkt->u.err_resp.cmd_id, + le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num), + le32_to_cpu(pkt->u.err_resp.error_info)); +} + +#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x + +static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon; + struct iwl4965_csa_notification *csa = &(pkt->u.csa_notif); + IWL_DEBUG_11H("CSA notif: channel %d, status %d\n", + le16_to_cpu(csa->channel), le32_to_cpu(csa->status)); + rxon->channel = csa->channel; + priv->staging_rxon.channel = csa->channel; +} + +static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif); + + if (!report->state) { + IWL_DEBUG(IWL_DL_11H, + "Spectrum Measure Notification: Start\n"); + return; + } + + memcpy(&priv->measure_report, report, sizeof(*report)); + priv->measurement_status |= MEASUREMENT_READY; +#endif +} + +static void iwl4965_rx_pm_sleep_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl4965_sleep_notification *sleep = &(pkt->u.sleep_notif); + IWL_DEBUG_RX("sleep mode: %d, src: %d\n", + sleep->pm_sleep_mode, sleep->pm_wakeup_src); +#endif +} + +static void iwl4965_rx_pm_debug_statistics_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + IWL_DEBUG_RADIO("Dumping %d bytes of unhandled " + "notification for %s:\n", + le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd)); + iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len)); +} + +static void iwl4965_bg_beacon_update(void *p) +{ + struct iwl_priv *priv = p; + struct sk_buff *beacon; + + /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ + beacon = ieee80211_beacon_get(priv->hw, priv->vif, NULL); + + if (!beacon) { + IWL_ERROR("update beacon failed\n"); + return; + } + + mutex_lock(&priv->mutex); + /* new beacon skb is allocated every time; dispose previous.*/ + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + priv->ibss_beacon = beacon; + mutex_unlock(&priv->mutex); + + iwl4965_send_beacon_cmd(priv); +} + +/** + * iwl4965_bg_statistics_periodic - Timer callback to queue statistics + * + * This callback is provided in order to send a statistics request. + * + * This timer function is continually reset to execute within + * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION + * was received. We need to ensure we receive the statistics in order + * to update the temperature used for calibrating the TXPOWER. + */ +static void iwl4965_bg_statistics_periodic(unsigned long data) +{ + struct iwl_priv *priv = (struct iwl_priv *)data; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + iwl_send_statistics_request(priv, CMD_ASYNC); +} + +static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl4965_beacon_notif *beacon = &(pkt->u.beacon_status); + u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); + + IWL_DEBUG_RX("beacon status %x retries %d iss %d " + "tsf %d %d rate %d\n", + le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, + beacon->beacon_notify_hdr.failure_frame, + le32_to_cpu(beacon->ibss_mgr_status), + le32_to_cpu(beacon->high_tsf), + le32_to_cpu(beacon->low_tsf), rate); +#endif + + if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && + (!test_bit(STATUS_EXIT_PENDING, &priv->status))) + queue_work(priv->workqueue, &priv->beacon_update); +} + +/* Handle notification from uCode that card's power state is changing + * due to software, hardware, or critical temperature RFKILL */ +static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); + unsigned long status = priv->status; + + IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n", + (flags & HW_CARD_DISABLED) ? "Kill" : "On", + (flags & SW_CARD_DISABLED) ? "Kill" : "On"); + + if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | + RF_CARD_DISABLED)) { + + iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + if (!iwl_grab_nic_access(priv)) { + iwl_write_direct32( + priv, HBUS_TARG_MBX_C, + HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); + + iwl_release_nic_access(priv); + } + + if (!(flags & RXON_CARD_DISABLED)) { + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + if (!iwl_grab_nic_access(priv)) { + iwl_write_direct32( + priv, HBUS_TARG_MBX_C, + HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); + + iwl_release_nic_access(priv); + } + } + + if (flags & RF_CARD_DISABLED) { + iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + iwl_read32(priv, CSR_UCODE_DRV_GP1); + if (!iwl_grab_nic_access(priv)) + iwl_release_nic_access(priv); + } + } + + if (flags & HW_CARD_DISABLED) + set_bit(STATUS_RF_KILL_HW, &priv->status); + else + clear_bit(STATUS_RF_KILL_HW, &priv->status); + + + if (flags & SW_CARD_DISABLED) + set_bit(STATUS_RF_KILL_SW, &priv->status); + else + clear_bit(STATUS_RF_KILL_SW, &priv->status); + + if (!(flags & RXON_CARD_DISABLED)) + iwl_scan_cancel(priv); + + if ((test_bit(STATUS_RF_KILL_HW, &status) != + test_bit(STATUS_RF_KILL_HW, &priv->status)) || + (test_bit(STATUS_RF_KILL_SW, &status) != + test_bit(STATUS_RF_KILL_SW, &priv->status))) + queue_work(priv->workqueue, &priv->rf_kill); + else + wake_up_interruptible(&priv->wait_command_queue); +} + +int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) + goto err; + + if (src == IWL_PWR_SRC_VAUX) { + u32 val; + ret = pci_read_config_dword(priv->pci_dev, PCI_CFG_POWER_SOURCE, + &val); + + if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } else { + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } + + iwl_release_nic_access(priv); +err: + spin_unlock_irqrestore(&priv->lock, flags); + return ret; +} + +/** + * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks + * + * Setup the RX handlers for each of the reply types sent from the uCode + * to the host. + * + * This function chains into the hardware specific files for them to setup + * any hardware specific handlers as well. + */ +static void iwl_setup_rx_handlers(struct iwl_priv *priv) +{ + priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive; + priv->rx_handlers[REPLY_ERROR] = iwl4965_rx_reply_error; + priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl4965_rx_csa; + priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = + iwl4965_rx_spectrum_measure_notif; + priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl4965_rx_pm_sleep_notif; + priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = + iwl4965_rx_pm_debug_statistics_notif; + priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; + + /* + * The same handler is used for both the REPLY to a discrete + * statistics request from the host as well as for the periodic + * statistics notifications (after received beacons) from the uCode. + */ + priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_rx_statistics; + priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics; + + iwl_setup_rx_scan_handlers(priv); + + /* status change handler */ + priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif; + + priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] = + iwl_rx_missed_beacon_notif; + /* Rx handlers */ + priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy; + priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx; + /* block ack */ + priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl_rx_reply_compressed_ba; + /* Set up hardware specific Rx handlers */ + priv->cfg->ops->lib->rx_handler_setup(priv); +} + +/* + * this should be called while priv->lock is locked +*/ +static void __iwl_rx_replenish(struct iwl_priv *priv) +{ + iwl_rx_allocate(priv); + iwl_rx_queue_restock(priv); +} + + +/** + * iwl_rx_handle - Main entry function for receiving responses from uCode + * + * Uses the priv->rx_handlers callback function array to invoke + * the appropriate handlers, including command responses, + * frame-received notifications, and other notifications. + */ +void iwl_rx_handle(struct iwl_priv *priv) +{ + struct iwl_rx_mem_buffer *rxb; + struct iwl_rx_packet *pkt; + struct iwl_rx_queue *rxq = &priv->rxq; + u32 r, i; + int reclaim; + unsigned long flags; + u8 fill_rx = 0; + u32 count = 8; + + /* uCode's read index (stored in shared DRAM) indicates the last Rx + * buffer that the driver may process (last buffer filled by ucode). */ + r = priv->cfg->ops->lib->shared_mem_rx_idx(priv); + i = rxq->read; + + /* Rx interrupt, but nothing sent from uCode */ + if (i == r) + IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d\n", r, i); + + if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2)) + fill_rx = 1; + + while (i != r) { + rxb = rxq->queue[i]; + + /* If an RXB doesn't have a Rx queue slot associated with it, + * then a bug has been introduced in the queue refilling + * routines -- catch it here */ + BUG_ON(rxb == NULL); + + rxq->queue[i] = NULL; + + pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + pkt = (struct iwl_rx_packet *)rxb->skb->data; + + /* Reclaim a command buffer only if this packet is a response + * to a (driver-originated) command. + * If the packet (e.g. Rx frame) originated from uCode, + * there is no command buffer to reclaim. + * Ucode should set SEQ_RX_FRAME bit if ucode-originated, + * but apparently a few don't get set; catch them here. */ + reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && + (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && + (pkt->hdr.cmd != REPLY_RX) && + (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && + (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && + (pkt->hdr.cmd != REPLY_TX); + + /* Based on type of command response or notification, + * handle those that need handling via function in + * rx_handlers table. See iwl4965_setup_rx_handlers() */ + if (priv->rx_handlers[pkt->hdr.cmd]) { + IWL_DEBUG(IWL_DL_RX, "r = %d, i = %d, %s, 0x%02x\n", r, + i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); + priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); + } else { + /* No handling needed */ + IWL_DEBUG(IWL_DL_RX, + "r %d i %d No handler needed for %s, 0x%02x\n", + r, i, get_cmd_string(pkt->hdr.cmd), + pkt->hdr.cmd); + } + + if (reclaim) { + /* Invoke any callbacks, transfer the skb to caller, and + * fire off the (possibly) blocking iwl_send_cmd() + * as we reclaim the driver command queue */ + if (rxb && rxb->skb) + iwl_tx_cmd_complete(priv, rxb); + else + IWL_WARNING("Claim null rxb?\n"); + } + + /* For now we just don't re-use anything. We can tweak this + * later to try and re-use notification packets and SKBs that + * fail to Rx correctly */ + if (rxb->skb != NULL) { + priv->alloc_rxb_skb--; + dev_kfree_skb_any(rxb->skb); + rxb->skb = NULL; + } + + pci_unmap_single(priv->pci_dev, rxb->dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + spin_lock_irqsave(&rxq->lock, flags); + list_add_tail(&rxb->list, &priv->rxq.rx_used); + spin_unlock_irqrestore(&rxq->lock, flags); + i = (i + 1) & RX_QUEUE_MASK; + /* If there are a lot of unused frames, + * restock the Rx queue so ucode wont assert. */ + if (fill_rx) { + count++; + if (count >= 8) { + priv->rxq.read = i; + __iwl_rx_replenish(priv); + count = 0; + } + } + } + + /* Backtrack one entry */ + priv->rxq.read = i; + iwl_rx_queue_restock(priv); +} + +#ifdef CONFIG_IWLWIFI_DEBUG +static void iwl4965_print_rx_config_cmd(struct iwl_priv *priv) +{ + struct iwl_rxon_cmd *rxon = &priv->staging_rxon; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_RADIO("RX CONFIG:\n"); + iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); + IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); + IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); + IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n", + le32_to_cpu(rxon->filter_flags)); + IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type); + IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n", + rxon->ofdm_basic_rates); + IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); + IWL_DEBUG_RADIO("u8[6] node_addr: %s\n", + print_mac(mac, rxon->node_addr)); + IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n", + print_mac(mac, rxon->bssid_addr)); + IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); +} +#endif + +static void iwl4965_enable_interrupts(struct iwl_priv *priv) +{ + IWL_DEBUG_ISR("Enabling interrupts\n"); + set_bit(STATUS_INT_ENABLED, &priv->status); + iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK); +} + +/* call this function to flush any scheduled tasklet */ +static inline void iwl_synchronize_irq(struct iwl_priv *priv) +{ + /* wait to make sure we flush pedding tasklet*/ + synchronize_irq(priv->pci_dev->irq); + tasklet_kill(&priv->irq_tasklet); +} + +static inline void iwl4965_disable_interrupts(struct iwl_priv *priv) +{ + clear_bit(STATUS_INT_ENABLED, &priv->status); + + /* disable interrupts from uCode/NIC to host */ + iwl_write32(priv, CSR_INT_MASK, 0x00000000); + + /* acknowledge/clear/reset any interrupts still pending + * from uCode or flow handler (Rx/Tx DMA) */ + iwl_write32(priv, CSR_INT, 0xffffffff); + iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff); + IWL_DEBUG_ISR("Disabled interrupts\n"); +} + + +/** + * iwl4965_irq_handle_error - called for HW or SW error interrupt from card + */ +static void iwl4965_irq_handle_error(struct iwl_priv *priv) +{ + /* Set the FW error flag -- cleared on iwl4965_down */ + set_bit(STATUS_FW_ERROR, &priv->status); + + /* Cancel currently queued command. */ + clear_bit(STATUS_HCMD_ACTIVE, &priv->status); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (priv->debug_level & IWL_DL_FW_ERRORS) { + iwl_dump_nic_error_log(priv); + iwl_dump_nic_event_log(priv); + iwl4965_print_rx_config_cmd(priv); + } +#endif + + wake_up_interruptible(&priv->wait_command_queue); + + /* Keep the restart process from trying to send host + * commands by clearing the INIT status bit */ + clear_bit(STATUS_READY, &priv->status); + + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { + IWL_DEBUG(IWL_DL_FW_ERRORS, + "Restarting adapter due to uCode error.\n"); + + if (iwl_is_associated(priv)) { + memcpy(&priv->recovery_rxon, &priv->active_rxon, + sizeof(priv->recovery_rxon)); + priv->error_recovering = 1; + } + if (priv->cfg->mod_params->restart_fw) + queue_work(priv->workqueue, &priv->restart); + } +} + +static void iwl4965_error_recovery(struct iwl_priv *priv) +{ + unsigned long flags; + + memcpy(&priv->staging_rxon, &priv->recovery_rxon, + sizeof(priv->staging_rxon)); + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + + iwl_rxon_add_station(priv, priv->bssid, 1); + + spin_lock_irqsave(&priv->lock, flags); + priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id); + priv->error_recovering = 0; + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void iwl4965_irq_tasklet(struct iwl_priv *priv) +{ + u32 inta, handled = 0; + u32 inta_fh; + unsigned long flags; +#ifdef CONFIG_IWLWIFI_DEBUG + u32 inta_mask; +#endif + + spin_lock_irqsave(&priv->lock, flags); + + /* Ack/clear/reset pending uCode interrupts. + * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, + * and will clear only when CSR_FH_INT_STATUS gets cleared. */ + inta = iwl_read32(priv, CSR_INT); + iwl_write32(priv, CSR_INT, inta); + + /* Ack/clear/reset pending flow-handler (DMA) interrupts. + * Any new interrupts that happen after this, either while we're + * in this tasklet, or later, will show up in next ISR/tasklet. */ + inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); + iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (priv->debug_level & IWL_DL_ISR) { + /* just for debug */ + inta_mask = iwl_read32(priv, CSR_INT_MASK); + IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", + inta, inta_mask, inta_fh); + } +#endif + + /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not + * atomic, make sure that inta covers all the interrupts that + * we've discovered, even if FH interrupt came in just after + * reading CSR_INT. */ + if (inta_fh & CSR49_FH_INT_RX_MASK) + inta |= CSR_INT_BIT_FH_RX; + if (inta_fh & CSR49_FH_INT_TX_MASK) + inta |= CSR_INT_BIT_FH_TX; + + /* Now service all interrupt bits discovered above. */ + if (inta & CSR_INT_BIT_HW_ERR) { + IWL_ERROR("Microcode HW error detected. Restarting.\n"); + + /* Tell the device to stop sending interrupts */ + iwl4965_disable_interrupts(priv); + + iwl4965_irq_handle_error(priv); + + handled |= CSR_INT_BIT_HW_ERR; + + spin_unlock_irqrestore(&priv->lock, flags); + + return; + } + +#ifdef CONFIG_IWLWIFI_DEBUG + if (priv->debug_level & (IWL_DL_ISR)) { + /* NIC fires this, but we don't use it, redundant with WAKEUP */ + if (inta & CSR_INT_BIT_SCD) + IWL_DEBUG_ISR("Scheduler finished to transmit " + "the frame/frames.\n"); + + /* Alive notification via Rx interrupt will do the real work */ + if (inta & CSR_INT_BIT_ALIVE) + IWL_DEBUG_ISR("Alive interrupt\n"); + } +#endif + /* Safely ignore these bits for debug checks below */ + inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); + + /* HW RF KILL switch toggled */ + if (inta & CSR_INT_BIT_RF_KILL) { + int hw_rf_kill = 0; + if (!(iwl_read32(priv, CSR_GP_CNTRL) & + CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) + hw_rf_kill = 1; + + IWL_DEBUG(IWL_DL_RF_KILL, "RF_KILL bit toggled to %s.\n", + hw_rf_kill ? "disable radio":"enable radio"); + + /* driver only loads ucode once setting the interface up. + * the driver as well won't allow loading if RFKILL is set + * therefore no need to restart the driver from this handler + */ + if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) + clear_bit(STATUS_RF_KILL_HW, &priv->status); + + handled |= CSR_INT_BIT_RF_KILL; + } + + /* Chip got too hot and stopped itself */ + if (inta & CSR_INT_BIT_CT_KILL) { + IWL_ERROR("Microcode CT kill error detected.\n"); + handled |= CSR_INT_BIT_CT_KILL; + } + + /* Error detected by uCode */ + if (inta & CSR_INT_BIT_SW_ERR) { + IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n", + inta); + iwl4965_irq_handle_error(priv); + handled |= CSR_INT_BIT_SW_ERR; + } + + /* uCode wakes up after power-down sleep */ + if (inta & CSR_INT_BIT_WAKEUP) { + IWL_DEBUG_ISR("Wakeup interrupt\n"); + iwl_rx_queue_update_write_ptr(priv, &priv->rxq); + iwl_txq_update_write_ptr(priv, &priv->txq[0]); + iwl_txq_update_write_ptr(priv, &priv->txq[1]); + iwl_txq_update_write_ptr(priv, &priv->txq[2]); + iwl_txq_update_write_ptr(priv, &priv->txq[3]); + iwl_txq_update_write_ptr(priv, &priv->txq[4]); + iwl_txq_update_write_ptr(priv, &priv->txq[5]); + + handled |= CSR_INT_BIT_WAKEUP; + } + + /* All uCode command responses, including Tx command responses, + * Rx "responses" (frame-received notification), and other + * notifications from uCode come through here*/ + if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { + iwl_rx_handle(priv); + handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); + } + + if (inta & CSR_INT_BIT_FH_TX) { + IWL_DEBUG_ISR("Tx interrupt\n"); + handled |= CSR_INT_BIT_FH_TX; + /* FH finished to write, send event */ + priv->ucode_write_complete = 1; + wake_up_interruptible(&priv->wait_command_queue); + } + + if (inta & ~handled) + IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled); + + if (inta & ~CSR_INI_SET_MASK) { + IWL_WARNING("Disabled INTA bits 0x%08x were pending\n", + inta & ~CSR_INI_SET_MASK); + IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh); + } + + /* Re-enable all interrupts */ + /* only Re-enable if diabled by irq */ + if (test_bit(STATUS_INT_ENABLED, &priv->status)) + iwl4965_enable_interrupts(priv); + +#ifdef CONFIG_IWLWIFI_DEBUG + if (priv->debug_level & (IWL_DL_ISR)) { + inta = iwl_read32(priv, CSR_INT); + inta_mask = iwl_read32(priv, CSR_INT_MASK); + inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); + IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " + "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); + } +#endif + spin_unlock_irqrestore(&priv->lock, flags); +} + +static irqreturn_t iwl4965_isr(int irq, void *data, struct pt_regs *regs) +{ + struct iwl_priv *priv = data; + u32 inta, inta_mask; + u32 inta_fh; + if (!priv) + return IRQ_NONE; + + spin_lock(&priv->lock); + + /* Disable (but don't clear!) interrupts here to avoid + * back-to-back ISRs and sporadic interrupts from our NIC. + * If we have something to service, the tasklet will re-enable ints. + * If we *don't* have something, we'll re-enable before leaving here. */ + inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */ + iwl_write32(priv, CSR_INT_MASK, 0x00000000); + + /* Discover which interrupts are active/pending */ + inta = iwl_read32(priv, CSR_INT); + inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); + + /* Ignore interrupt if there's nothing in NIC to service. + * This may be due to IRQ shared with another device, + * or due to sporadic interrupts thrown from our NIC. */ + if (!inta && !inta_fh) { + IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n"); + goto none; + } + + if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { + /* Hardware disappeared. It might have already raised + * an interrupt */ + IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta); + goto unplugged; + } + + IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", + inta, inta_mask, inta_fh); + + inta &= ~CSR_INT_BIT_SCD; + + /* iwl4965_irq_tasklet() will service interrupts and re-enable them */ + if (likely(inta || inta_fh)) + tasklet_schedule(&priv->irq_tasklet); + + unplugged: + spin_unlock(&priv->lock); + return IRQ_HANDLED; + + none: + /* re-enable interrupts here since we don't have anything to service. */ + /* only Re-enable if diabled by irq */ + if (test_bit(STATUS_INT_ENABLED, &priv->status)) + iwl4965_enable_interrupts(priv); + spin_unlock(&priv->lock); + return IRQ_NONE; +} + +/****************************************************************************** + * + * uCode download functions + * + ******************************************************************************/ + +static void iwl4965_dealloc_ucode_pci(struct iwl_priv *priv) +{ + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); + iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot); +} + +static void iwl4965_nic_start(struct iwl_priv *priv) +{ + /* Remove all resets to allow NIC to operate */ + iwl_write32(priv, CSR_RESET, 0); +} + + +/** + * iwl4965_read_ucode - Read uCode images from disk file. + * + * Copy into buffers for card to fetch via bus-mastering + */ +static int iwl4965_read_ucode(struct iwl_priv *priv) +{ + struct iwl_ucode *ucode; + int ret; + const struct firmware *ucode_raw; + const char *name = priv->cfg->fw_name; + u8 *src; + size_t len; + u32 ver, inst_size, data_size, init_size, init_data_size, boot_size; + + /* Ask kernel firmware_class module to get the boot firmware off disk. + * request_firmware() is synchronous, file is in memory on return. */ + ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev); + if (ret < 0) { + IWL_ERROR("%s firmware file req failed: Reason %d\n", + name, ret); + goto error; + } + + IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n", + name, ucode_raw->size); + + /* Make sure that we got at least our header! */ + if (ucode_raw->size < sizeof(*ucode)) { + IWL_ERROR("File size way too small!\n"); + ret = -EINVAL; + goto err_release; + } + + /* Data from ucode file: header followed by uCode images */ + ucode = (void *)ucode_raw->data; + + ver = le32_to_cpu(ucode->ver); + inst_size = le32_to_cpu(ucode->inst_size); + data_size = le32_to_cpu(ucode->data_size); + init_size = le32_to_cpu(ucode->init_size); + init_data_size = le32_to_cpu(ucode->init_data_size); + boot_size = le32_to_cpu(ucode->boot_size); + + IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver); + IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", + inst_size); + IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", + data_size); + IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", + init_size); + IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", + init_data_size); + IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", + boot_size); + + /* Verify size of file vs. image size info in file's header */ + if (ucode_raw->size < sizeof(*ucode) + + inst_size + data_size + init_size + + init_data_size + boot_size) { + + IWL_DEBUG_INFO("uCode file size %d too small\n", + (int)ucode_raw->size); + ret = -EINVAL; + goto err_release; + } + + /* Verify that uCode images will fit in card's SRAM */ + if (inst_size > priv->hw_params.max_inst_size) { + IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n", + inst_size); + ret = -EINVAL; + goto err_release; + } + + if (data_size > priv->hw_params.max_data_size) { + IWL_DEBUG_INFO("uCode data len %d too large to fit in\n", + data_size); + ret = -EINVAL; + goto err_release; + } + if (init_size > priv->hw_params.max_inst_size) { + IWL_DEBUG_INFO + ("uCode init instr len %d too large to fit in\n", + init_size); + ret = -EINVAL; + goto err_release; + } + if (init_data_size > priv->hw_params.max_data_size) { + IWL_DEBUG_INFO + ("uCode init data len %d too large to fit in\n", + init_data_size); + ret = -EINVAL; + goto err_release; + } + if (boot_size > priv->hw_params.max_bsm_size) { + IWL_DEBUG_INFO + ("uCode boot instr len %d too large to fit in\n", + boot_size); + ret = -EINVAL; + goto err_release; + } + + /* Allocate ucode buffers for card's bus-master loading ... */ + + /* Runtime instructions and 2 copies of data: + * 1) unmodified from disk + * 2) backup cache for save/restore during power-downs */ + priv->ucode_code.len = inst_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); + + priv->ucode_data.len = data_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); + + priv->ucode_data_backup.len = data_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + + /* Initialization instructions and data */ + if (init_size && init_data_size) { + priv->ucode_init.len = init_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); + + priv->ucode_init_data.len = init_data_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); + + if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) + goto err_pci_alloc; + } + + /* Bootstrap (instructions only, no data) */ + if (boot_size) { + priv->ucode_boot.len = boot_size; + iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); + + if (!priv->ucode_boot.v_addr) + goto err_pci_alloc; + } + + /* Copy images into buffers for card's bus-master reads ... */ + + /* Runtime instructions (first block of data in file) */ + src = &ucode->data[0]; + len = priv->ucode_code.len; + IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len); + memcpy(priv->ucode_code.v_addr, src, len); + IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", + priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); + + /* Runtime data (2nd block) + * NOTE: Copy into backup buffer will be done in iwl4965_up() */ + src = &ucode->data[inst_size]; + len = priv->ucode_data.len; + IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len); + memcpy(priv->ucode_data.v_addr, src, len); + memcpy(priv->ucode_data_backup.v_addr, src, len); + + /* Initialization instructions (3rd block) */ + if (init_size) { + src = &ucode->data[inst_size + data_size]; + len = priv->ucode_init.len; + IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n", + len); + memcpy(priv->ucode_init.v_addr, src, len); + } + + /* Initialization data (4th block) */ + if (init_data_size) { + src = &ucode->data[inst_size + data_size + init_size]; + len = priv->ucode_init_data.len; + IWL_DEBUG_INFO("Copying (but not loading) init data len %Zd\n", + len); + memcpy(priv->ucode_init_data.v_addr, src, len); + } + + /* Bootstrap instructions (5th block) */ + src = &ucode->data[inst_size + data_size + init_size + init_data_size]; + len = priv->ucode_boot.len; + IWL_DEBUG_INFO("Copying (but not loading) boot instr len %Zd\n", len); + memcpy(priv->ucode_boot.v_addr, src, len); + + /* We have our copies now, allow OS release its copies */ + release_firmware(ucode_raw); + return 0; + + err_pci_alloc: + IWL_ERROR("failed to allocate pci memory\n"); + ret = -ENOMEM; + iwl4965_dealloc_ucode_pci(priv); + + err_release: + release_firmware(ucode_raw); + + error: + return ret; +} + +/** + * iwl_alive_start - called after REPLY_ALIVE notification received + * from protocol/runtime uCode (initialization uCode's + * Alive gets handled by iwl_init_alive_start()). + */ +static void iwl_alive_start(struct iwl_priv *priv) +{ + int ret = 0; + + IWL_DEBUG_INFO("Runtime Alive received.\n"); + + if (priv->card_alive.is_valid != UCODE_VALID_OK) { + /* We had an error bringing up the hardware, so take it + * all the way back down so we can try again */ + IWL_DEBUG_INFO("Alive failed.\n"); + goto restart; + } + + /* Initialize uCode has loaded Runtime uCode ... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "runtime" alive if code weren't properly loaded. */ + if (iwl_verify_ucode(priv)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO("Bad runtime uCode load.\n"); + goto restart; + } + + iwl_clear_stations_table(priv); + ret = priv->cfg->ops->lib->alive_notify(priv); + if (ret) { + IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n", + ret); + goto restart; + } + + /* After the ALIVE response, we can send host commands to 4965 uCode */ + set_bit(STATUS_ALIVE, &priv->status); + + if (iwl_is_rfkill(priv)) + return; + + ieee80211_wake_queues(priv->hw); + + priv->active_rate = priv->rates_mask; + priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; + + if (iwl_is_associated(priv)) { + struct iwl_rxon_cmd *active_rxon = + (struct iwl_rxon_cmd *)&priv->active_rxon; + + memcpy(&priv->staging_rxon, &priv->active_rxon, + sizeof(priv->staging_rxon)); + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + } else { + /* Initialize our rx_config data */ + iwl4965_connection_init_rx_config(priv); + memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); + } + + /* Configure Bluetooth device coexistence support */ + iwl4965_send_bt_config(priv); + + iwl_reset_run_time_calib(priv); + + /* Configure the adapter for unassociated operation */ + iwl4965_commit_rxon(priv); + + /* At this point, the NIC is initialized and operational */ + iwl_rf_kill_ct_config(priv); + + iwl_leds_register(priv); + + IWL_DEBUG_INFO("ALIVE processing complete.\n"); + set_bit(STATUS_READY, &priv->status); + wake_up_interruptible(&priv->wait_command_queue); + + if (priv->error_recovering) + iwl4965_error_recovery(priv); + + iwl_power_update_mode(priv, 1); + ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); + + if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status)) + iwl4965_set_mode(priv, priv->iw_mode); + + return; + + restart: + queue_work(priv->workqueue, &priv->restart); +} + +static void iwl_cancel_deferred_work(struct iwl_priv *priv); + +static void __iwl4965_down(struct iwl_priv *priv) +{ + unsigned long flags; + int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status); + + IWL_DEBUG_INFO(DRV_NAME " is going down\n"); + + if (!exit_pending) + set_bit(STATUS_EXIT_PENDING, &priv->status); + + iwl_leds_unregister(priv); + + iwl_clear_stations_table(priv); + + /* Unblock any waiting calls */ + wake_up_interruptible_all(&priv->wait_command_queue); + + /* Wipe out the EXIT_PENDING status bit if we are not actually + * exiting the module */ + if (!exit_pending) + clear_bit(STATUS_EXIT_PENDING, &priv->status); + + /* stop and reset the on-board processor */ + iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); + + /* tell the device to stop sending interrupts */ + spin_lock_irqsave(&priv->lock, flags); + iwl4965_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + iwl_synchronize_irq(priv); + + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + + /* If we have not previously called iwl4965_init() then + * clear all bits but the RF Kill and SUSPEND bits and return */ + if (!iwl_is_init(priv)) { + priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << + STATUS_RF_KILL_HW | + test_bit(STATUS_RF_KILL_SW, &priv->status) << + STATUS_RF_KILL_SW | + test_bit(STATUS_GEO_CONFIGURED, &priv->status) << + STATUS_GEO_CONFIGURED | + test_bit(STATUS_IN_SUSPEND, &priv->status) << + STATUS_IN_SUSPEND | + test_bit(STATUS_EXIT_PENDING, &priv->status) << + STATUS_EXIT_PENDING; + goto exit; + } + + /* ...otherwise clear out all the status bits but the RF Kill and + * SUSPEND bits and continue taking the NIC down. */ + priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << + STATUS_RF_KILL_HW | + test_bit(STATUS_RF_KILL_SW, &priv->status) << + STATUS_RF_KILL_SW | + test_bit(STATUS_GEO_CONFIGURED, &priv->status) << + STATUS_GEO_CONFIGURED | + test_bit(STATUS_IN_SUSPEND, &priv->status) << + STATUS_IN_SUSPEND | + test_bit(STATUS_FW_ERROR, &priv->status) << + STATUS_FW_ERROR | + test_bit(STATUS_EXIT_PENDING, &priv->status) << + STATUS_EXIT_PENDING; + + spin_lock_irqsave(&priv->lock, flags); + iwl_clear_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_txq_ctx_stop(priv); + iwl_rxq_stop(priv); + + spin_lock_irqsave(&priv->lock, flags); + if (!iwl_grab_nic_access(priv)) { + iwl_write_prph(priv, APMG_CLK_DIS_REG, + APMG_CLK_VAL_DMA_CLK_RQT); + iwl_release_nic_access(priv); + } + spin_unlock_irqrestore(&priv->lock, flags); + + udelay(5); + + /* FIXME: apm_ops.suspend(priv) */ + if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status)) + priv->cfg->ops->lib->apm_ops.stop(priv); + else + priv->cfg->ops->lib->apm_ops.reset(priv); + priv->cfg->ops->lib->free_shared_mem(priv); + + exit: + memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); + + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + priv->ibss_beacon = NULL; + + /* clear out any free frames */ + iwl_clear_free_frames(priv); +} + +static void iwl4965_down(struct iwl_priv *priv) +{ + mutex_lock(&priv->mutex); + __iwl4965_down(priv); + mutex_unlock(&priv->mutex); + + iwl_cancel_deferred_work(priv); +} + +#define MAX_HW_RESTARTS 5 + +static int __iwl4965_up(struct iwl_priv *priv) +{ + int i; + int ret; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { + IWL_WARNING("Exit pending; will not bring the NIC up\n"); + return -EIO; + } + + if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { + IWL_ERROR("ucode not available for device bringup\n"); + return -EIO; + } + + /* If platform's RF_KILL switch is NOT set to KILL */ + if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + clear_bit(STATUS_RF_KILL_HW, &priv->status); + else + set_bit(STATUS_RF_KILL_HW, &priv->status); + + if (iwl_is_rfkill(priv)) { + iwl4965_enable_interrupts(priv); + IWL_WARNING("Radio disabled by %s RF Kill switch\n", + test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW"); + return 0; + } + + iwl_write32(priv, CSR_INT, 0xFFFFFFFF); + + ret = priv->cfg->ops->lib->alloc_shared_mem(priv); + if (ret) { + IWL_ERROR("Unable to allocate shared memory\n"); + return ret; + } + + ret = iwl_hw_nic_init(priv); + if (ret) { + IWL_ERROR("Unable to init nic\n"); + return ret; + } + + /* make sure rfkill handshake bits are cleared */ + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); + + /* clear (again), then enable host interrupts */ + iwl_write32(priv, CSR_INT, 0xFFFFFFFF); + iwl4965_enable_interrupts(priv); + + /* really make sure rfkill handshake bits are cleared */ + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + + /* Copy original ucode data image from disk into backup cache. + * This will be used to initialize the on-board processor's + * data SRAM for a clean start when the runtime program first loads. */ + memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, + priv->ucode_data.len); + + for (i = 0; i < MAX_HW_RESTARTS; i++) { + + iwl_clear_stations_table(priv); + + /* load bootstrap state machine, + * load bootstrap program into processor's memory, + * prepare to load the "initialize" uCode */ + ret = priv->cfg->ops->lib->load_ucode(priv); + + if (ret) { + IWL_ERROR("Unable to set up bootstrap uCode: %d\n", ret); + continue; + } + + /* Clear out the uCode error bit if it is set */ + clear_bit(STATUS_FW_ERROR, &priv->status); + + /* start card; "initialize" will load runtime ucode */ + iwl4965_nic_start(priv); + + IWL_DEBUG_INFO(DRV_NAME " is coming up\n"); + + return 0; + } + + set_bit(STATUS_EXIT_PENDING, &priv->status); + __iwl4965_down(priv); + clear_bit(STATUS_EXIT_PENDING, &priv->status); + + /* tried to restart and config the device for as long as our + * patience could withstand */ + IWL_ERROR("Unable to initialize device after %d attempts.\n", i); + return -EIO; +} + + +/***************************************************************************** + * + * Workqueue callbacks + * + *****************************************************************************/ + +static void iwl_bg_init_alive_start(void *p) +{ + struct iwl_priv *priv = p; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + priv->cfg->ops->lib->init_alive_start(priv); + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_alive_start(void *p) +{ + struct iwl_priv *priv = p; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + iwl_alive_start(priv); + mutex_unlock(&priv->mutex); +} + +static void iwl4965_bg_rf_kill(void *p) +{ + struct iwl_priv *priv = p; + + wake_up_interruptible(&priv->wait_command_queue); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + + if (!iwl_is_rfkill(priv)) { + IWL_DEBUG(IWL_DL_RF_KILL, + "HW and/or SW RF Kill no longer active, restarting " + "device\n"); + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) + queue_work(priv->workqueue, &priv->restart); + } else { + /* make sure mac80211 stop sending Tx frame */ + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + + if (!test_bit(STATUS_RF_KILL_HW, &priv->status)) + IWL_DEBUG_RF_KILL("Can not turn radio back on - " + "disabled by SW switch\n"); + else + IWL_WARNING("Radio Frequency Kill Switch is On:\n" + "Kill switch must be turned off for " + "wireless networking to work.\n"); + } + mutex_unlock(&priv->mutex); + iwl_rfkill_set_hw_state(priv); +} + +static void iwl4965_bg_set_monitor(void *p) +{ + struct iwl_priv *priv = p; + int ret; + + IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n"); + + mutex_lock(&priv->mutex); + + ret = iwl4965_set_mode(priv, IEEE80211_IF_TYPE_MNTR); + + if (ret) { + if (ret == -EAGAIN) + IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n"); + else + IWL_ERROR("iwl4965_set_mode() failed ret = %d\n", ret); + } + + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_run_time_calib_work(void *p) +{ + struct iwl_priv *priv = p; + + mutex_lock(&priv->mutex); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status) || + test_bit(STATUS_SCANNING, &priv->status)) { + mutex_unlock(&priv->mutex); + return; + } + + if (priv->start_calib) { + iwl_chain_noise_calibration(priv, &priv->statistics); + + iwl_sensitivity_calibration(priv, &priv->statistics); + } + + mutex_unlock(&priv->mutex); + return; +} + +static void iwl4965_bg_up(void *p) +{ + struct iwl_priv *priv = p; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + __iwl4965_up(priv); + mutex_unlock(&priv->mutex); + iwl_rfkill_set_hw_state(priv); +} + +static void iwl4965_bg_restart(void *p) +{ + struct iwl_priv *priv = p; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + iwl4965_down(priv); + queue_work(priv->workqueue, &priv->up); +} + +static void iwl4965_bg_rx_replenish(void *p) +{ + struct iwl_priv *priv = p; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + iwl_rx_replenish(priv); + mutex_unlock(&priv->mutex); +} + +#define IWL_DELAY_NEXT_SCAN (HZ*2) + +static void iwl4965_post_associate(struct iwl_priv *priv) +{ + struct ieee80211_conf *conf = NULL; + int ret = 0; + DECLARE_MAC_BUF(mac); + unsigned long flags; + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + IWL_ERROR("%s Should not be called in AP mode\n", __func__); + return; + } + + IWL_DEBUG_ASSOC("Associated as %d to: %s\n", + priv->assoc_id, + print_mac(mac, priv->active_rxon.bssid_addr)); + + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + + if (!priv->vif || !priv->is_open) + return; + + iwl_scan_cancel_timeout(priv, 200); + + conf = ieee80211_get_hw_conf(priv->hw); + + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + + memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd)); + iwl4965_setup_rxon_timing(priv); + ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, + sizeof(priv->rxon_timing), &priv->rxon_timing); + if (ret) + IWL_WARNING("REPLY_RXON_TIMING failed - " + "Attempting to continue.\n"); + + priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; + + if (priv->current_ht_config.is_ht) + iwl_set_rxon_ht(priv, &priv->current_ht_config); + + iwl_set_rxon_chain(priv); + priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); + + IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n", + priv->assoc_id, priv->beacon_int); + + if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) + priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { + if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) + priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + + } + + iwl4965_commit_rxon(priv); + + switch (priv->iw_mode) { + case IEEE80211_IF_TYPE_STA: + break; + + case IEEE80211_IF_TYPE_IBSS: + + /* assume default assoc id */ + priv->assoc_id = 1; + + iwl_rxon_add_station(priv, priv->bssid, 0); + iwl4965_send_beacon_cmd(priv); + + break; + + default: + IWL_ERROR("%s Should not be called in %d mode\n", + __func__, priv->iw_mode); + break; + } + + /* Enable Rx differential gain and sensitivity calibrations */ + iwl_chain_noise_reset(priv); + priv->start_calib = 1; + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + priv->assoc_station_added = 1; + + spin_lock_irqsave(&priv->lock, flags); + iwl_activate_qos(priv, 0); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_power_update_mode(priv, 0); + /* we have just associated, don't start scan too early */ + priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN; +} + +static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); + +static void iwl_bg_scan_completed(void *p) +{ + struct iwl_priv *priv = p; + + IWL_DEBUG_SCAN("SCAN complete scan\n"); + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (test_bit(STATUS_CONF_PENDING, &priv->status)) + iwl4965_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw)); + + ieee80211_scan_completed(priv->hw); + + /* Since setting the TXPOWER may have been deferred while + * performing the scan, fire one off */ + mutex_lock(&priv->mutex); + iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); + mutex_unlock(&priv->mutex); +} + +/***************************************************************************** + * + * mac80211 entry point functions + * + *****************************************************************************/ + +#define UCODE_READY_TIMEOUT (4 * HZ) + +static int iwl4965_mac_start(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = hw->priv; + int ret; + u16 pci_cmd; + + IWL_DEBUG_MAC80211("enter\n"); + + if (pci_enable_device(priv->pci_dev)) { + IWL_ERROR("Fail to pci_enable_device\n"); + return -ENODEV; + } + pci_restore_state(priv->pci_dev); + pci_enable_msi(priv->pci_dev); + + /* enable interrupts if needed: hw bug w/a */ + pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd); + if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { + pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd); + } + + ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED, + DRV_NAME, priv); + if (ret) { + IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq); + goto out_disable_msi; + } + + /* we should be verifying the device is ready to be opened */ + mutex_lock(&priv->mutex); + + memset(&priv->staging_rxon, 0, sizeof(struct iwl_rxon_cmd)); + /* fetch ucode file from disk, alloc and copy to bus-master buffers ... + * ucode filename and max sizes are card-specific. */ + + if (!priv->ucode_code.len) { + ret = iwl4965_read_ucode(priv); + if (ret) { + IWL_ERROR("Could not read microcode: %d\n", ret); + mutex_unlock(&priv->mutex); + goto out_release_irq; + } + } + + ret = __iwl4965_up(priv); + + mutex_unlock(&priv->mutex); + + iwl_rfkill_set_hw_state(priv); + + if (ret) + goto out_release_irq; + + if (iwl_is_rfkill(priv)) + goto out; + + IWL_DEBUG_INFO("Start UP work done.\n"); + + if (test_bit(STATUS_IN_SUSPEND, &priv->status)) + return 0; + + /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from + * mac80211 will not be run successfully. */ + ret = wait_event_interruptible_timeout(priv->wait_command_queue, + test_bit(STATUS_READY, &priv->status), + UCODE_READY_TIMEOUT); + if (!ret) { + if (!test_bit(STATUS_READY, &priv->status)) { + IWL_ERROR("START_ALIVE timeout after %dms.\n", + jiffies_to_msecs(UCODE_READY_TIMEOUT)); + ret = -ETIMEDOUT; + goto out_release_irq; + } + } + +out: + priv->is_open = 1; + IWL_DEBUG_MAC80211("leave\n"); + return 0; + +out_release_irq: + free_irq(priv->pci_dev->irq, priv); +out_disable_msi: + pci_disable_msi(priv->pci_dev); + pci_disable_device(priv->pci_dev); + priv->is_open = 0; + IWL_DEBUG_MAC80211("leave - failed\n"); + return ret; +} + +static void iwl4965_mac_stop(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("enter\n"); + + if (!priv->is_open) { + IWL_DEBUG_MAC80211("leave - skip\n"); + return; + } + + priv->is_open = 0; + + if (iwl_is_ready_rf(priv)) { + /* stop mac, cancel any scan request and clear + * RXON_FILTER_ASSOC_MSK BIT + */ + mutex_lock(&priv->mutex); + iwl_scan_cancel_timeout(priv, 100); + mutex_unlock(&priv->mutex); + } + + iwl4965_down(priv); + + flush_workqueue(priv->workqueue); + free_irq(priv->pci_dev->irq, priv); + pci_disable_msi(priv->pci_dev); + pci_save_state(priv->pci_dev); + pci_disable_device(priv->pci_dev); + + IWL_DEBUG_MAC80211("leave\n"); +} + +static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *ctl) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MACDUMP("enter\n"); + + if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { + IWL_DEBUG_MAC80211("leave - monitor\n"); + dev_kfree_skb_any(skb); + return 0; + } + + IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, + ctl->tx_rate->bitrate); + + if (iwl_tx_skb(priv, skb, ctl)) + dev_kfree_skb_any(skb); + + IWL_DEBUG_MACDUMP("leave\n"); + return 0; +} + +static int iwl4965_mac_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct iwl_priv *priv = hw->priv; + unsigned long flags; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_MAC80211("enter: type %d\n", conf->type); + + if (priv->vif) { + IWL_DEBUG_MAC80211("leave - vif != NULL\n"); + return -EOPNOTSUPP; + } + + spin_lock_irqsave(&priv->lock, flags); + priv->vif = conf->vif; + + spin_unlock_irqrestore(&priv->lock, flags); + + mutex_lock(&priv->mutex); + + if (conf->mac_addr) { + IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr)); + memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); + } + + if (iwl4965_set_mode(priv, conf->type) == -EAGAIN) + /* we are not ready, will run again when ready */ + set_bit(STATUS_MODE_PENDING, &priv->status); + + mutex_unlock(&priv->mutex); + + IWL_DEBUG_MAC80211("leave\n"); + return 0; +} + +/** + * iwl4965_mac_config - mac80211 config callback + * + * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to + * be set inappropriately and the driver currently sets the hardware up to + * use it whenever needed. + */ +static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +{ + struct iwl_priv *priv = hw->priv; + const struct iwl_channel_info *ch_info; + unsigned long flags; + int ret = 0; + u16 channel; + + mutex_lock(&priv->mutex); + IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); + + priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP); + + if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) { + IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n"); + goto out; + } + + if (!conf->radio_enabled) + iwl_radio_kill_sw_disable_radio(priv); + + if (!iwl_is_ready(priv)) { + IWL_DEBUG_MAC80211("leave - not ready\n"); + ret = -EIO; + goto out; + } + + if (unlikely(!priv->cfg->mod_params->disable_hw_scan && + test_bit(STATUS_SCANNING, &priv->status))) { + IWL_DEBUG_MAC80211("leave - scanning\n"); + set_bit(STATUS_CONF_PENDING, &priv->status); + mutex_unlock(&priv->mutex); + return 0; + } + + channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + ch_info = iwl_get_channel_info(priv, conf->channel->band, channel); + if (!is_channel_valid(ch_info)) { + IWL_DEBUG_MAC80211("leave - invalid channel\n"); + ret = -EINVAL; + goto out; + } + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && + !is_channel_ibss(ch_info)) { + IWL_ERROR("channel %d in band %d not IBSS channel\n", + conf->channel->hw_value, conf->channel->band); + ret = -EINVAL; + goto out; + } + + spin_lock_irqsave(&priv->lock, flags); + + /* if we are switching from ht to 2.4 clear flags + * from any ht related info since 2.4 does not + * support ht */ + if ((le16_to_cpu(priv->staging_rxon.channel) != channel) +#ifdef IEEE80211_CONF_CHANNEL_SWITCH + && !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) +#endif + ) + priv->staging_rxon.flags = 0; + + iwl_set_rxon_channel(priv, conf->channel); + + iwl_set_flags_for_band(priv, conf->channel->band); + + /* The list of supported rates and rate mask can be different + * for each band; since the band may have changed, reset + * the rate mask to what mac80211 lists */ + iwl4965_set_rate(priv); + + spin_unlock_irqrestore(&priv->lock, flags); + +#ifdef IEEE80211_CONF_CHANNEL_SWITCH + if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) { + iwl4965_hw_channel_switch(priv, conf->channel); + goto out; + } +#endif + + if (!conf->radio_enabled) { + IWL_DEBUG_MAC80211("leave - radio disabled\n"); + goto out; + } + + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_MAC80211("leave - RF kill\n"); + ret = -EIO; + goto out; + } + + IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n", + priv->tx_power_user_lmt, conf->power_level); + + iwl_set_tx_power(priv, conf->power_level, false); + + iwl4965_set_rate(priv); + + if (memcmp(&priv->active_rxon, + &priv->staging_rxon, sizeof(priv->staging_rxon))) + iwl4965_commit_rxon(priv); + else + IWL_DEBUG_INFO("No re-sending same RXON configuration.\n"); + + IWL_DEBUG_MAC80211("leave\n"); + +out: + clear_bit(STATUS_CONF_PENDING, &priv->status); + mutex_unlock(&priv->mutex); + return ret; +} + +static void iwl4965_config_ap(struct iwl_priv *priv) +{ + int ret = 0; + unsigned long flags; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + /* The following should be done only at AP bring up */ + if (!(iwl_is_associated(priv))) { + + /* RXON - unassoc (to set timing command) */ + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + + /* RXON Timing */ + memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd)); + iwl4965_setup_rxon_timing(priv); + ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, + sizeof(priv->rxon_timing), &priv->rxon_timing); + if (ret) + IWL_WARNING("REPLY_RXON_TIMING failed - " + "Attempting to continue.\n"); + + iwl_set_rxon_chain(priv); + + /* FIXME: what should be the assoc_id for AP? */ + priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); + if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) + priv->staging_rxon.flags |= + RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags &= + ~RXON_FLG_SHORT_PREAMBLE_MSK; + + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { + if (priv->assoc_capability & + WLAN_CAPABILITY_SHORT_SLOT_TIME) + priv->staging_rxon.flags |= + RXON_FLG_SHORT_SLOT_MSK; + else + priv->staging_rxon.flags &= + ~RXON_FLG_SHORT_SLOT_MSK; + + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) + priv->staging_rxon.flags &= + ~RXON_FLG_SHORT_SLOT_MSK; + } + /* restore RXON assoc */ + priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + spin_lock_irqsave(&priv->lock, flags); + iwl_activate_qos(priv, 1); + spin_unlock_irqrestore(&priv->lock, flags); + iwl_rxon_add_station(priv, iwl_bcast_addr, 0); + } + iwl4965_send_beacon_cmd(priv); + + /* FIXME - we need to add code here to detect a totally new + * configuration, reset the AP, unassoc, rxon timing, assoc, + * clear sta table, add BCAST sta... */ +} + +#if 0 /* Not in RHEL5 */ +/* temporary */ +static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb); +#endif + +static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + struct iwl_priv *priv = hw->priv; + DECLARE_MAC_BUF(mac); + unsigned long flags; + int rc; + + if (conf == NULL) + return -EIO; + + if (priv->vif != vif) { + IWL_DEBUG_MAC80211("leave - priv->vif != vif\n"); + return 0; + } + +#if 0 /* Not in RHEL5 */ + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && + conf->changed & IEEE80211_IFCC_BEACON) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif, NULL); + if (!beacon) + return -ENOMEM; + rc = iwl4965_mac_beacon_update(hw, beacon); + if (rc) + return rc; + } +#endif + + if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && + (!conf->ssid_len)) { + IWL_DEBUG_MAC80211 + ("Leaving in AP mode because HostAPD is not ready.\n"); + return 0; + } + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + mutex_lock(&priv->mutex); + + if (conf->bssid) + IWL_DEBUG_MAC80211("bssid: %s\n", + print_mac(mac, conf->bssid)); + +/* + * very dubious code was here; the probe filtering flag is never set: + * + if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) && + !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) { + */ + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + if (!conf->bssid) { + conf->bssid = priv->mac_addr; + memcpy(priv->bssid, priv->mac_addr, ETH_ALEN); + IWL_DEBUG_MAC80211("bssid was set to: %s\n", + print_mac(mac, conf->bssid)); + } + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + priv->ibss_beacon = ieee80211_beacon_get(hw, vif, NULL); + } + + if (iwl_is_rfkill(priv)) + goto done; + + if (conf->bssid && !is_zero_ether_addr(conf->bssid) && + !is_multicast_ether_addr(conf->bssid)) { + /* If there is currently a HW scan going on in the background + * then we need to cancel it else the RXON below will fail. */ + if (iwl_scan_cancel_timeout(priv, 100)) { + IWL_WARNING("Aborted scan still in progress " + "after 100ms\n"); + IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); + mutex_unlock(&priv->mutex); + return -EAGAIN; + } + memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN); + + /* TODO: Audit driver for usage of these members and see + * if mac80211 deprecates them (priv->bssid looks like it + * shouldn't be there, but I haven't scanned the IBSS code + * to verify) - jpk */ + memcpy(priv->bssid, conf->bssid, ETH_ALEN); + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + iwl4965_config_ap(priv); + else { + rc = iwl4965_commit_rxon(priv); + if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc) + iwl_rxon_add_station( + priv, priv->active_rxon.bssid_addr, 1); + } + + } else { + iwl_scan_cancel_timeout(priv, 100); + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + } + + done: + spin_lock_irqsave(&priv->lock, flags); + if (!conf->ssid_len) + memset(priv->essid, 0, IW_ESSID_MAX_SIZE); + else + memcpy(priv->essid, conf->ssid, conf->ssid_len); + + priv->essid_len = conf->ssid_len; + spin_unlock_irqrestore(&priv->lock, flags); + + IWL_DEBUG_MAC80211("leave\n"); + mutex_unlock(&priv->mutex); + + return 0; +} + +static void iwl4965_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_addr_list *mc_list) +{ + struct iwl_priv *priv = hw->priv; + + if (changed_flags & (*total_flags) & FIF_OTHER_BSS) { + IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n", + IEEE80211_IF_TYPE_MNTR, + changed_flags, *total_flags); + /* queue work 'cuz mac80211 is holding a lock which + * prevents us from issuing (synchronous) f/w cmds */ + queue_work(priv->workqueue, &priv->set_monitor); + } + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | + FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; +} + +static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("enter\n"); + + mutex_lock(&priv->mutex); + + if (iwl_is_ready_rf(priv)) { + iwl_scan_cancel_timeout(priv, 100); + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + } + if (priv->vif == conf->vif) { + priv->vif = NULL; + memset(priv->bssid, 0, ETH_ALEN); + memset(priv->essid, 0, IW_ESSID_MAX_SIZE); + priv->essid_len = 0; + } + mutex_unlock(&priv->mutex); + + IWL_DEBUG_MAC80211("leave\n"); + +} + +#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) +static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("changes = 0x%X\n", changes); + + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n", + bss_conf->use_short_preamble); + if (bss_conf->use_short_preamble) + priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; + } + + if (changes & BSS_CHANGED_ERP_CTS_PROT) { + IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot); + if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) + priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK; + else + priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; + } + + if (changes & BSS_CHANGED_HT) { + IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht); + iwl4965_ht_conf(priv, bss_conf); + iwl_set_rxon_chain(priv); + } + + if (changes & BSS_CHANGED_ASSOC) { + IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc); + /* This should never happen as this function should + * never be called from interrupt context. */ + if (WARN_ON_ONCE(in_interrupt())) + return; + if (bss_conf->assoc) { + priv->assoc_id = bss_conf->aid; + priv->beacon_int = bss_conf->beacon_int; + priv->timestamp = bss_conf->timestamp; + priv->assoc_capability = bss_conf->assoc_capability; + priv->next_scan_jiffies = jiffies + + IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; + mutex_lock(&priv->mutex); + iwl4965_post_associate(priv); + mutex_unlock(&priv->mutex); + } else { + priv->assoc_id = 0; + IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc); + } + } else if (changes && iwl_is_associated(priv) && priv->assoc_id) { + IWL_DEBUG_MAC80211("Associated Changes %d\n", changes); + iwl_send_rxon_assoc(priv); + } + +} + +static int iwl_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t ssid_len) +{ + int ret; + unsigned long flags; + struct iwl_priv *priv = hw->priv; + + IWL_DEBUG_MAC80211("enter\n"); + + mutex_lock(&priv->mutex); + spin_lock_irqsave(&priv->lock, flags); + + if (!iwl_is_ready_rf(priv)) { + ret = -EIO; + IWL_DEBUG_MAC80211("leave - not ready or exit pending\n"); + goto out_unlock; + } + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */ + ret = -EIO; + IWL_ERROR("ERROR: APs don't scan\n"); + goto out_unlock; + } + + /* we don't schedule scan within next_scan_jiffies period */ + if (priv->next_scan_jiffies && + time_after(priv->next_scan_jiffies, jiffies)) { + IWL_DEBUG_SCAN("scan rejected: within next scan period\n"); + ret = -EAGAIN; + goto out_unlock; + } + /* if we just finished scan ask for delay */ + if (iwl_is_associated(priv) && priv->last_scan_jiffies && + time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN, jiffies)) { + IWL_DEBUG_SCAN("scan rejected: within previous scan period\n"); + ret = -EAGAIN; + goto out_unlock; + } + if (ssid_len) { + priv->one_direct_scan = 1; + priv->direct_ssid_len = min_t(u8, ssid_len, IW_ESSID_MAX_SIZE); + memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len); + } else { + priv->one_direct_scan = 0; + } + + ret = iwl_scan_initiate(priv); + + IWL_DEBUG_MAC80211("leave\n"); + +out_unlock: + spin_unlock_irqrestore(&priv->lock, flags); + mutex_unlock(&priv->mutex); + + return ret; +} + +static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, + struct ieee80211_key_conf *keyconf, const u8 *addr, + u32 iv32, u16 *phase1key) +{ + struct iwl_priv *priv = hw->priv; + u8 sta_id = IWL_INVALID_STATION; + unsigned long flags; + __le16 key_flags = 0; + int i; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_MAC80211("enter\n"); + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_MAC80211("leave - %s not in station map.\n", + print_mac(mac, addr)); + return; + } + + iwl_scan_cancel_timeout(priv, 100); + + key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (sta_id == priv->hw_params.bcast_sta_id) + key_flags |= STA_KEY_MULTICAST_MSK; + + spin_lock_irqsave(&priv->sta_lock, flags); + + priv->stations[sta_id].sta.key.key_flags = key_flags; + priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; + + for (i = 0; i < 5; i++) + priv->stations[sta_id].sta.key.tkip_rx_ttak[i] = + cpu_to_le16(phase1key[i]); + + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + + iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + + spin_unlock_irqrestore(&priv->sta_lock, flags); + + IWL_DEBUG_MAC80211("leave\n"); +} + +static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_addr, const u8 *addr, + struct ieee80211_key_conf *key) +{ + struct iwl_priv *priv = hw->priv; + DECLARE_MAC_BUF(mac); + int ret = 0; + u8 sta_id = IWL_INVALID_STATION; + u8 is_default_wep_key = 0; + + IWL_DEBUG_MAC80211("enter\n"); + + if (priv->hw_params.sw_crypto) { + IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n"); + return -EOPNOTSUPP; + } + + if (is_zero_ether_addr(addr)) + /* only support pairwise keys */ + return -EOPNOTSUPP; + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_MAC80211("leave - %s not in station map.\n", + print_mac(mac, addr)); + return -EINVAL; + + } + + mutex_lock(&priv->mutex); + iwl_scan_cancel_timeout(priv, 100); + mutex_unlock(&priv->mutex); + + /* If we are getting WEP group key and we didn't receive any key mapping + * so far, we are in legacy wep mode (group key only), otherwise we are + * in 1X mode. + * In legacy wep mode, we use another host command to the uCode */ + if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id && + priv->iw_mode != IEEE80211_IF_TYPE_AP) { + if (cmd == SET_KEY) + is_default_wep_key = !priv->key_mapping_key; + else + is_default_wep_key = priv->default_wep_key; + } + + switch (cmd) { + case SET_KEY: + if (is_default_wep_key) + ret = iwl_set_default_wep_key(priv, key); + else + ret = iwl_set_dynamic_key(priv, key, sta_id); + + IWL_DEBUG_MAC80211("enable hwcrypto key\n"); + break; + case DISABLE_KEY: + if (is_default_wep_key) + ret = iwl_remove_default_wep_key(priv, key); + else + ret = iwl_remove_dynamic_key(priv, key, sta_id); + + IWL_DEBUG_MAC80211("disable hwcrypto key\n"); + break; + default: + ret = -EINVAL; + } + + IWL_DEBUG_MAC80211("leave\n"); + + return ret; +} + +static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, int queue, + const struct ieee80211_tx_queue_params *params) +{ + struct iwl_priv *priv = hw->priv; + unsigned long flags; + int q; + + IWL_DEBUG_MAC80211("enter\n"); + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_MAC80211("leave - RF not ready\n"); + return -EIO; + } + + if (queue >= AC_NUM) { + IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue); + return 0; + } + + if (!priv->qos_data.qos_enable) { + priv->qos_data.qos_active = 0; + IWL_DEBUG_MAC80211("leave - qos not enabled\n"); + return 0; + } + q = AC_NUM - 1 - queue; + + spin_lock_irqsave(&priv->lock, flags); + + priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min); + priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max); + priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; + priv->qos_data.def_qos_parm.ac[q].edca_txop = + cpu_to_le16((params->txop * 32)); + + priv->qos_data.def_qos_parm.ac[q].reserved1 = 0; + priv->qos_data.qos_active = 1; + + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + iwl_activate_qos(priv, 1); + else if (priv->assoc_id && iwl_is_associated(priv)) + iwl_activate_qos(priv, 0); + + spin_unlock_irqrestore(&priv->lock, flags); + + IWL_DEBUG_MAC80211("leave\n"); + return 0; +} + +static int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, + enum ieee80211_ampdu_mlme_action action, + const u8 *addr, u16 tid, u16 *ssn) +{ + struct iwl_priv *priv = hw->priv; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", + print_mac(mac, addr), tid); + + if (!(priv->cfg->sku & IWL_SKU_N)) + return -EACCES; + + switch (action) { + case IEEE80211_AMPDU_RX_START: + IWL_DEBUG_HT("start Rx\n"); + return iwl_rx_agg_start(priv, addr, tid, *ssn); + case IEEE80211_AMPDU_RX_STOP: + IWL_DEBUG_HT("stop Rx\n"); + return iwl_rx_agg_stop(priv, addr, tid); + case IEEE80211_AMPDU_TX_START: + IWL_DEBUG_HT("start Tx\n"); + return iwl_tx_agg_start(priv, addr, tid, ssn); + case IEEE80211_AMPDU_TX_STOP: + IWL_DEBUG_HT("stop Tx\n"); + return iwl_tx_agg_stop(priv, addr, tid); + default: + IWL_DEBUG_HT("unknown\n"); + return -EINVAL; + break; + } + return 0; +} +static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats) +{ + struct iwl_priv *priv = hw->priv; + int i, avail; + struct iwl_tx_queue *txq; + struct iwl_queue *q; + unsigned long flags; + + IWL_DEBUG_MAC80211("enter\n"); + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_MAC80211("leave - RF not ready\n"); + return -EIO; + } + + spin_lock_irqsave(&priv->lock, flags); + + for (i = 0; i < AC_NUM; i++) { + txq = &priv->txq[i]; + q = &txq->q; + avail = iwl_queue_space(q); + + stats->data[i].len = q->n_window - avail; + stats->data[i].limit = q->n_window - q->high_mark; + stats->data[i].count = q->n_window; + + } + spin_unlock_irqrestore(&priv->lock, flags); + + IWL_DEBUG_MAC80211("leave\n"); + + return 0; +} + +static int iwl4965_mac_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats) +{ + struct iwl_priv *priv = hw->priv; + + priv = hw->priv; + IWL_DEBUG_MAC80211("enter\n"); + IWL_DEBUG_MAC80211("leave\n"); + + return 0; +} + +static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) +{ + struct iwl_priv *priv = hw->priv; + unsigned long flags; + + mutex_lock(&priv->mutex); + IWL_DEBUG_MAC80211("enter\n"); + + spin_lock_irqsave(&priv->lock, flags); + memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info)); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_reset_qos(priv); + + spin_lock_irqsave(&priv->lock, flags); + priv->assoc_id = 0; + priv->assoc_capability = 0; + priv->assoc_station_added = 0; + + /* new association get rid of ibss beacon skb */ + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + priv->ibss_beacon = NULL; + + priv->beacon_int = priv->hw->conf.beacon_int; + priv->timestamp = 0; + if ((priv->iw_mode == IEEE80211_IF_TYPE_STA)) + priv->beacon_int = 0; + + spin_unlock_irqrestore(&priv->lock, flags); + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_MAC80211("leave - not ready\n"); + mutex_unlock(&priv->mutex); + return; + } + + /* we are restarting association process + * clear RXON_FILTER_ASSOC_MSK bit + */ + if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { + iwl_scan_cancel_timeout(priv, 100); + priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + iwl4965_commit_rxon(priv); + } + + iwl_power_update_mode(priv, 0); + + /* Per mac80211.h: This is only used in IBSS mode... */ + if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { + + IWL_DEBUG_MAC80211("leave - not in IBSS\n"); + mutex_unlock(&priv->mutex); + return; + } + + iwl4965_set_rate(priv); + + mutex_unlock(&priv->mutex); + + IWL_DEBUG_MAC80211("leave\n"); +} + +#if 0 /* Not in RHEL5 */ +static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct iwl_priv *priv = hw->priv; + unsigned long flags; + __le64 timestamp; + + mutex_lock(&priv->mutex); + IWL_DEBUG_MAC80211("enter\n"); + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_MAC80211("leave - RF not ready\n"); + mutex_unlock(&priv->mutex); + return -EIO; + } + + if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { + IWL_DEBUG_MAC80211("leave - not IBSS\n"); + mutex_unlock(&priv->mutex); + return -EIO; + } + + spin_lock_irqsave(&priv->lock, flags); + + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + priv->ibss_beacon = skb; + + priv->assoc_id = 0; + timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; + priv->timestamp = le64_to_cpu(timestamp); + + IWL_DEBUG_MAC80211("leave\n"); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_reset_qos(priv); + + iwl4965_post_associate(priv); + + mutex_unlock(&priv->mutex); + + return 0; +} +#endif + +/***************************************************************************** + * + * sysfs attributes + * + *****************************************************************************/ + +#ifdef CONFIG_IWLWIFI_DEBUG + +/* + * The following adds a new attribute to the sysfs representation + * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) + * used for controlling the debug level. + * + * See the level definitions in iwl for details. + */ + +static ssize_t show_debug_level(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = d->driver_data; + + return sprintf(buf, "0x%08X\n", priv->debug_level); +} +static ssize_t store_debug_level(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = d->driver_data; + char *p = (char *)buf; + u32 val; + + val = simple_strtoul(p, &p, 0); + if (p == buf) + printk(KERN_INFO DRV_NAME + ": %s is not in hex or decimal form.\n", buf); + else + priv->debug_level = val; + + return strnlen(buf, count); +} + +static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, + show_debug_level, store_debug_level); + + +#endif /* CONFIG_IWLWIFI_DEBUG */ + + +static ssize_t show_version(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = d->driver_data; + struct iwl_alive_resp *palive = &priv->card_alive; + ssize_t pos = 0; + u16 eeprom_ver; + + if (palive->is_valid) + pos += sprintf(buf + pos, + "fw version: 0x%01X.0x%01X.0x%01X.0x%01X\n" + "fw type: 0x%01X 0x%01X\n", + palive->ucode_major, palive->ucode_minor, + palive->sw_rev[0], palive->sw_rev[1], + palive->ver_type, palive->ver_subtype); + else + pos += sprintf(buf + pos, "fw not loaded\n"); + + if (priv->eeprom) { + eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION); + pos += sprintf(buf + pos, "EEPROM version: 0x%x\n", + eeprom_ver); + } else { + pos += sprintf(buf + pos, "EEPROM not initialzed\n"); + } + + return pos; +} + +static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL); + +static ssize_t show_temperature(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + return sprintf(buf, "%d\n", priv->temperature); +} + +static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); + +static ssize_t show_tx_power(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + return sprintf(buf, "%d\n", priv->tx_power_user_lmt); +} + +static ssize_t store_tx_power(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + char *p = (char *)buf; + u32 val; + + val = simple_strtoul(p, &p, 10); + if (p == buf) + printk(KERN_INFO DRV_NAME + ": %s is not in decimal form.\n", buf); + else + iwl_set_tx_power(priv, val, false); + + return count; +} + +static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); + +static ssize_t show_flags(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + + return sprintf(buf, "0x%04X\n", priv->active_rxon.flags); +} + +static ssize_t store_flags(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + u32 flags = simple_strtoul(buf, NULL, 0); + + mutex_lock(&priv->mutex); + if (le32_to_cpu(priv->staging_rxon.flags) != flags) { + /* Cancel any currently running scans... */ + if (iwl_scan_cancel_timeout(priv, 100)) + IWL_WARNING("Could not cancel scan.\n"); + else { + IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n", + flags); + priv->staging_rxon.flags = cpu_to_le32(flags); + iwl4965_commit_rxon(priv); + } + } + mutex_unlock(&priv->mutex); + + return count; +} + +static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); + +static ssize_t show_filter_flags(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + + return sprintf(buf, "0x%04X\n", + le32_to_cpu(priv->active_rxon.filter_flags)); +} + +static ssize_t store_filter_flags(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + u32 filter_flags = simple_strtoul(buf, NULL, 0); + + mutex_lock(&priv->mutex); + if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) { + /* Cancel any currently running scans... */ + if (iwl_scan_cancel_timeout(priv, 100)) + IWL_WARNING("Could not cancel scan.\n"); + else { + IWL_DEBUG_INFO("Committing rxon.filter_flags = " + "0x%04X\n", filter_flags); + priv->staging_rxon.filter_flags = + cpu_to_le32(filter_flags); + iwl4965_commit_rxon(priv); + } + } + mutex_unlock(&priv->mutex); + + return count; +} + +static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, + store_filter_flags); + +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT + +static ssize_t show_measurement(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + struct iwl4965_spectrum_notification measure_report; + u32 size = sizeof(measure_report), len = 0, ofs = 0; + u8 *data = (u8 *)&measure_report; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (!(priv->measurement_status & MEASUREMENT_READY)) { + spin_unlock_irqrestore(&priv->lock, flags); + return 0; + } + memcpy(&measure_report, &priv->measure_report, size); + priv->measurement_status = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + while (size && (PAGE_SIZE - len)) { + hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, + PAGE_SIZE - len, 1); + len = strlen(buf); + if (PAGE_SIZE - len) + buf[len++] = '\n'; + + ofs += 16; + size -= min(size, 16U); + } + + return len; +} + +static ssize_t store_measurement(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + struct ieee80211_measurement_params params = { + .channel = le16_to_cpu(priv->active_rxon.channel), + .start_time = cpu_to_le64(priv->last_tsf), + .duration = cpu_to_le16(1), + }; + u8 type = IWL_MEASURE_BASIC; + u8 buffer[32]; + u8 channel; + + if (count) { + char *p = buffer; + strncpy(buffer, buf, min(sizeof(buffer), count)); + channel = simple_strtoul(p, NULL, 0); + if (channel) + params.channel = channel; + + p = buffer; + while (*p && *p != ' ') + p++; + if (*p) + type = simple_strtoul(p + 1, NULL, 0); + } + + IWL_DEBUG_INFO("Invoking measurement of type %d on " + "channel %d (for '%s')\n", type, params.channel, buf); + iwl4965_get_measurement(priv, ¶ms, type); + + return count; +} + +static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, + show_measurement, store_measurement); +#endif /* CONFIG_IWLAGN_SPECTRUM_MEASUREMENT */ + +static ssize_t store_retry_rate(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + + priv->retry_rate = simple_strtoul(buf, NULL, 0); + if (priv->retry_rate <= 0) + priv->retry_rate = 1; + + return count; +} + +static ssize_t show_retry_rate(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + return sprintf(buf, "%d", priv->retry_rate); +} + +static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate, + store_retry_rate); + +static ssize_t store_power_level(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + int ret; + int mode; + + mode = simple_strtoul(buf, NULL, 0); + mutex_lock(&priv->mutex); + + if (!iwl_is_ready(priv)) { + ret = -EAGAIN; + goto out; + } + + ret = iwl_power_set_user_mode(priv, mode); + if (ret) { + IWL_DEBUG_MAC80211("failed setting power mode.\n"); + goto out; + } + ret = count; + + out: + mutex_unlock(&priv->mutex); + return ret; +} + +static ssize_t show_power_level(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + int mode = priv->power_data.user_power_setting; + int system = priv->power_data.system_power_setting; + int level = priv->power_data.power_mode; + char *p = buf; + + switch (system) { + case IWL_POWER_SYS_AUTO: + p += sprintf(p, "SYSTEM:auto"); + break; + case IWL_POWER_SYS_AC: + p += sprintf(p, "SYSTEM:ac"); + break; + case IWL_POWER_SYS_BATTERY: + p += sprintf(p, "SYSTEM:battery"); + break; + } + + p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto"); + p += sprintf(p, "\tINDEX:%d", level); + p += sprintf(p, "\n"); + return p - buf + 1; +} + +static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level, + store_power_level); + +static ssize_t show_channels(struct device *d, + struct device_attribute *attr, char *buf) +{ + + struct iwl_priv *priv = dev_get_drvdata(d); + struct ieee80211_channel *channels = NULL; + const struct ieee80211_supported_band *supp_band = NULL; + int len = 0, i; + int count = 0; + + if (!test_bit(STATUS_GEO_CONFIGURED, &priv->status)) + return -EAGAIN; + + supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ); + channels = supp_band->channels; + count = supp_band->n_channels; + + len += sprintf(&buf[len], + "Displaying %d channels in 2.4GHz band " + "(802.11bg):\n", count); + + for (i = 0; i < count; i++) + len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n", + ieee80211_frequency_to_channel( + channels[i].center_freq), + channels[i].max_power, + channels[i].flags & IEEE80211_CHAN_RADAR ? + " (IEEE 802.11h required)" : "", + (!(channels[i].flags & IEEE80211_CHAN_NO_IBSS) + || (channels[i].flags & + IEEE80211_CHAN_RADAR)) ? "" : + ", IBSS", + channels[i].flags & + IEEE80211_CHAN_PASSIVE_SCAN ? + "passive only" : "active/passive"); + + supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ); + channels = supp_band->channels; + count = supp_band->n_channels; + + len += sprintf(&buf[len], "Displaying %d channels in 5.2GHz band " + "(802.11a):\n", count); + + for (i = 0; i < count; i++) + len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n", + ieee80211_frequency_to_channel( + channels[i].center_freq), + channels[i].max_power, + channels[i].flags & IEEE80211_CHAN_RADAR ? + " (IEEE 802.11h required)" : "", + ((channels[i].flags & IEEE80211_CHAN_NO_IBSS) + || (channels[i].flags & + IEEE80211_CHAN_RADAR)) ? "" : + ", IBSS", + channels[i].flags & + IEEE80211_CHAN_PASSIVE_SCAN ? + "passive only" : "active/passive"); + + return len; +} + +static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL); + +static ssize_t show_statistics(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = dev_get_drvdata(d); + u32 size = sizeof(struct iwl_notif_statistics); + u32 len = 0, ofs = 0; + u8 *data = (u8 *)&priv->statistics; + int rc = 0; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + mutex_lock(&priv->mutex); + rc = iwl_send_statistics_request(priv, 0); + mutex_unlock(&priv->mutex); + + if (rc) { + len = sprintf(buf, + "Error sending statistics request: 0x%08X\n", rc); + return len; + } + + while (size && (PAGE_SIZE - len)) { + hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, + PAGE_SIZE - len, 1); + len = strlen(buf); + if (PAGE_SIZE - len) + buf[len++] = '\n'; + + ofs += 16; + size -= min(size, 16U); + } + + return len; +} + +static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL); + +static ssize_t show_status(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; + if (!iwl_is_alive(priv)) + return -EAGAIN; + return sprintf(buf, "0x%08x\n", (int)priv->status); +} + +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +/***************************************************************************** + * + * driver setup and teardown + * + *****************************************************************************/ + +static void iwl_setup_deferred_work(struct iwl_priv *priv) +{ + priv->workqueue = create_workqueue(DRV_NAME); + + init_waitqueue_head(&priv->wait_command_queue); + + INIT_WORK(&priv->up, iwl4965_bg_up, priv); + INIT_WORK(&priv->restart, iwl4965_bg_restart, priv); + INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish, priv); + INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill, priv); + INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update, priv); + INIT_WORK(&priv->set_monitor, iwl4965_bg_set_monitor, priv); + INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work, priv); + INIT_WORK(&priv->init_alive_start, iwl_bg_init_alive_start, priv); + INIT_WORK(&priv->alive_start, iwl_bg_alive_start, priv); + + /* FIXME : remove when resolved PENDING */ + INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed, priv); + iwl_setup_scan_deferred_work(priv); + + if (priv->cfg->ops->lib->setup_deferred_work) + priv->cfg->ops->lib->setup_deferred_work(priv); + + init_timer(&priv->statistics_periodic); + priv->statistics_periodic.data = (unsigned long)priv; + priv->statistics_periodic.function = iwl4965_bg_statistics_periodic; + + tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) + iwl4965_irq_tasklet, (unsigned long)priv); +} + +static void iwl_cancel_deferred_work(struct iwl_priv *priv) +{ + if (priv->cfg->ops->lib->cancel_deferred_work) + priv->cfg->ops->lib->cancel_deferred_work(priv); + +#if 0 /* Not in RHEL5 */ + cancel_delayed_work_sync(&priv->init_alive_start); +#else + cancel_delayed_work(&priv->init_alive_start); + /* Make sure he has completed, since he can schedule other work */ + flush_workqueue(priv->workqueue); +#endif + cancel_delayed_work(&priv->scan_check); + cancel_delayed_work(&priv->alive_start); +#if 0 /* Not in RHEL5... */ + cancel_work_sync(&priv->beacon_update); +#else + flush_workqueue(priv->workqueue); +#endif + del_timer_sync(&priv->statistics_periodic); +} + +static struct attribute *iwl4965_sysfs_entries[] = { + &dev_attr_channels.attr, + &dev_attr_flags.attr, + &dev_attr_filter_flags.attr, +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT + &dev_attr_measurement.attr, +#endif + &dev_attr_power_level.attr, + &dev_attr_retry_rate.attr, + &dev_attr_statistics.attr, + &dev_attr_status.attr, + &dev_attr_temperature.attr, + &dev_attr_tx_power.attr, +#ifdef CONFIG_IWLWIFI_DEBUG + &dev_attr_debug_level.attr, +#endif + &dev_attr_version.attr, + + NULL +}; + +static struct attribute_group iwl4965_attribute_group = { + .name = NULL, /* put in device directory */ + .attrs = iwl4965_sysfs_entries, +}; + +static struct ieee80211_ops iwl4965_hw_ops = { + .tx = iwl4965_mac_tx, + .start = iwl4965_mac_start, + .stop = iwl4965_mac_stop, + .add_interface = iwl4965_mac_add_interface, + .remove_interface = iwl4965_mac_remove_interface, + .config = iwl4965_mac_config, + .config_interface = iwl4965_mac_config_interface, + .configure_filter = iwl4965_configure_filter, + .set_key = iwl4965_mac_set_key, + .update_tkip_key = iwl4965_mac_update_tkip_key, + .get_stats = iwl4965_mac_get_stats, + .get_tx_stats = iwl4965_mac_get_tx_stats, + .conf_tx = iwl4965_mac_conf_tx, + .reset_tsf = iwl4965_mac_reset_tsf, + .bss_info_changed = iwl4965_bss_info_changed, + .ampdu_action = iwl4965_mac_ampdu_action, + .hw_scan = iwl_mac_hw_scan +}; + +static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err = 0; + struct iwl_priv *priv; + struct ieee80211_hw *hw; + struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); + unsigned long flags; + DECLARE_MAC_BUF(mac); + + /************************ + * 1. Allocating HW data + ************************/ + + /* Disabling hardware scan means that mac80211 will perform scans + * "the hard way", rather than using device's scan. */ + if (cfg->mod_params->disable_hw_scan) { + if (cfg->mod_params->debug & IWL_DL_INFO) + dev_printk(KERN_DEBUG, &(pdev->dev), + "Disabling hw_scan\n"); + iwl4965_hw_ops.hw_scan = NULL; + } + + hw = iwl_alloc_all(cfg, &iwl4965_hw_ops); + if (!hw) { + err = -ENOMEM; + goto out; + } + priv = hw->priv; + /* At this point both hw and priv are allocated. */ + + SET_IEEE80211_DEV(hw, &pdev->dev); + + IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); + priv->cfg = cfg; + priv->pci_dev = pdev; + +#ifdef CONFIG_IWLWIFI_DEBUG + priv->debug_level = priv->cfg->mod_params->debug; + atomic_set(&priv->restrict_refcnt, 0); +#endif + + /************************** + * 2. Initializing PCI bus + **************************/ + if (pci_enable_device(pdev)) { + err = -ENODEV; + goto out_ieee80211_free_hw; + } + + pci_set_master(pdev); + + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (err) { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + /* both attempts failed: */ + if (err) { + printk(KERN_WARNING "%s: No suitable DMA available.\n", + DRV_NAME); + goto out_pci_disable_device; + } + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) + goto out_pci_disable_device; + + pci_set_drvdata(pdev, priv); + + + /*********************** + * 3. Read REV register + ***********************/ + priv->hw_base = pci_iomap(pdev, 0, 0); + if (!priv->hw_base) { + err = -ENODEV; + goto out_pci_release_regions; + } + + IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n", + (unsigned long long) pci_resource_len(pdev, 0)); + IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base); + + iwl_hw_detect(priv); + printk(KERN_INFO DRV_NAME + ": Detected Intel Wireless WiFi Link %s REV=0x%X\n", + priv->cfg->name, priv->hw_rev); + + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); + + /* amp init */ + err = priv->cfg->ops->lib->apm_ops.init(priv); + if (err < 0) { + IWL_DEBUG_INFO("Failed to init APMG\n"); + goto out_iounmap; + } + /***************** + * 4. Read EEPROM + *****************/ + /* Read the EEPROM */ + err = iwl_eeprom_init(priv); + if (err) { + IWL_ERROR("Unable to init EEPROM\n"); + goto out_iounmap; + } + err = iwl_eeprom_check_version(priv); + if (err) + goto out_iounmap; + + /* extract MAC Address */ + iwl_eeprom_get_mac(priv, priv->mac_addr); + IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr)); + SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); + + /************************ + * 5. Setup HW constants + ************************/ + if (iwl_set_hw_params(priv)) { + IWL_ERROR("failed to set hw parameters\n"); + goto out_free_eeprom; + } + + /******************* + * 6. Setup priv + *******************/ + + err = iwl_init_drv(priv); + if (err) + goto out_free_eeprom; + /* At this point both hw and priv are initialized. */ + + /********************************** + * 7. Initialize module parameters + **********************************/ + + /* Disable radio (SW RF KILL) via parameter when loading driver */ + if (priv->cfg->mod_params->disable) { + set_bit(STATUS_RF_KILL_SW, &priv->status); + IWL_DEBUG_INFO("Radio disabled.\n"); + } + + /******************** + * 8. Setup services + ********************/ + spin_lock_irqsave(&priv->lock, flags); + iwl4965_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + err = sysfs_create_group(&pdev->dev.kobj, &iwl4965_attribute_group); + if (err) { + IWL_ERROR("failed to create sysfs device attributes\n"); + goto out_uninit_drv; + } + + + iwl_setup_deferred_work(priv); + iwl_setup_rx_handlers(priv); + + /******************** + * 9. Conclude + ********************/ + pci_save_state(pdev); + pci_disable_device(pdev); + + /********************************** + * 10. Setup and register mac80211 + **********************************/ + + err = iwl_setup_mac(priv); + if (err) + goto out_remove_sysfs; + + err = iwl_dbgfs_register(priv, DRV_NAME); + if (err) + IWL_ERROR("failed to create debugfs files\n"); + + err = iwl_rfkill_init(priv); + if (err) + IWL_ERROR("Unable to initialize RFKILL system. " + "Ignoring error: %d\n", err); + iwl_power_initialize(priv); + return 0; + + out_remove_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); + out_uninit_drv: + iwl_uninit_drv(priv); + out_free_eeprom: + iwl_eeprom_free(priv); + out_iounmap: + pci_iounmap(pdev, priv->hw_base); + out_pci_release_regions: + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + out_pci_disable_device: + pci_disable_device(pdev); + out_ieee80211_free_hw: + ieee80211_free_hw(priv->hw); + out: + return err; +} + +static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) +{ + struct iwl_priv *priv = pci_get_drvdata(pdev); + unsigned long flags; + + if (!priv) + return; + + IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n"); + + iwl_dbgfs_unregister(priv); + sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); + + /* ieee80211_unregister_hw call wil cause iwl4965_mac_stop to + * to be called and iwl4965_down since we are removing the device + * we need to set STATUS_EXIT_PENDING bit. + */ + set_bit(STATUS_EXIT_PENDING, &priv->status); + if (priv->mac80211_registered) { + ieee80211_unregister_hw(priv->hw); + priv->mac80211_registered = 0; + } else { + iwl4965_down(priv); + } + + /* make sure we flush any pending irq or + * tasklet for the driver + */ + spin_lock_irqsave(&priv->lock, flags); + iwl4965_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + iwl_synchronize_irq(priv); + + iwl_rfkill_unregister(priv); + iwl4965_dealloc_ucode_pci(priv); + + if (priv->rxq.bd) + iwl_rx_queue_free(priv, &priv->rxq); + iwl_hw_txq_ctx_free(priv); + + iwl_clear_stations_table(priv); + iwl_eeprom_free(priv); + + + /*netif_stop_queue(dev); */ + flush_workqueue(priv->workqueue); + + /* ieee80211_unregister_hw calls iwl4965_mac_stop, which flushes + * priv->workqueue... so we can't take down the workqueue + * until now... */ + destroy_workqueue(priv->workqueue); + priv->workqueue = NULL; + + pci_iounmap(pdev, priv->hw_base); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + + iwl_uninit_drv(priv); + + if (priv->ibss_beacon) + dev_kfree_skb(priv->ibss_beacon); + + ieee80211_free_hw(priv->hw); +} + +#ifdef CONFIG_PM + +static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct iwl_priv *priv = pci_get_drvdata(pdev); + + if (priv->is_open) { + set_bit(STATUS_IN_SUSPEND, &priv->status); + iwl4965_mac_stop(priv->hw); + priv->is_open = 1; + } + + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int iwl4965_pci_resume(struct pci_dev *pdev) +{ + struct iwl_priv *priv = pci_get_drvdata(pdev); + + pci_set_power_state(pdev, PCI_D0); + + if (priv->is_open) + iwl4965_mac_start(priv->hw); + + clear_bit(STATUS_IN_SUSPEND, &priv->status); + return 0; +} + +#endif /* CONFIG_PM */ + +/***************************************************************************** + * + * driver and module entry point + * + *****************************************************************************/ + +/* Hardware specific file defines the PCI IDs table for that hardware module */ +static struct pci_device_id iwl_hw_card_ids[] = { +#ifdef CONFIG_IWL4965 + {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)}, + {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)}, +#endif /* CONFIG_IWL4965 */ +#ifdef CONFIG_IWL5000 + {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)}, + {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)}, + {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, + {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, + {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, + {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, + {IWL_PCI_DEVICE(0x4232, PCI_ANY_ID, iwl5100_agn_cfg)}, + {IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)}, + {IWL_PCI_DEVICE(0x4236, PCI_ANY_ID, iwl5300_agn_cfg)}, + {IWL_PCI_DEVICE(0x4237, PCI_ANY_ID, iwl5100_agn_cfg)}, + {IWL_PCI_DEVICE(0x423A, PCI_ANY_ID, iwl5350_agn_cfg)}, +#endif /* CONFIG_IWL5000 */ + {0} +}; +MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); + +static struct pci_driver iwl_driver = { + .name = DRV_NAME, + .id_table = iwl_hw_card_ids, + .probe = iwl4965_pci_probe, + .remove = __devexit_p(iwl4965_pci_remove), +#ifdef CONFIG_PM + .suspend = iwl4965_pci_suspend, + .resume = iwl4965_pci_resume, +#endif +}; + +static int __init iwl4965_init(void) +{ + + int ret; + printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); + printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); + + ret = iwlagn_rate_control_register(); + if (ret) { + IWL_ERROR("Unable to register rate control algorithm: %d\n", ret); + return ret; + } + + ret = pci_register_driver(&iwl_driver); + if (ret) { + IWL_ERROR("Unable to initialize PCI module\n"); + goto error_register; + } + + return ret; + +error_register: + iwlagn_rate_control_unregister(); + return ret; +} + +static void __exit iwl4965_exit(void) +{ + pci_unregister_driver(&iwl_driver); + iwlagn_rate_control_unregister(); +} + +module_exit(iwl4965_exit); +module_init(iwl4965_init); diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c new file mode 100644 index 0000000..35fb4a4 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-calib.c @@ -0,0 +1,862 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Tomas Winkler <tomas.winkler@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#include <net/mac80211.h> + +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-calib.h" + +/***************************************************************************** + * INIT calibrations framework + *****************************************************************************/ + + int iwl_send_calib_results(struct iwl_priv *priv) +{ + int ret = 0; + int i = 0; + + struct iwl_host_cmd hcmd = { + .id = REPLY_PHY_CALIBRATION_CMD, + .meta.flags = CMD_SIZE_HUGE, + }; + + for (i = 0; i < IWL_CALIB_MAX; i++) + if (priv->calib_results[i].buf) { + hcmd.len = priv->calib_results[i].buf_len; + hcmd.data = priv->calib_results[i].buf; + ret = iwl_send_cmd_sync(priv, &hcmd); + if (ret) + goto err; + } + + return 0; +err: + IWL_ERROR("Error %d iteration %d\n", ret, i); + return ret; +} +EXPORT_SYMBOL(iwl_send_calib_results); + +int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len) +{ + if (res->buf_len != len) { + kfree(res->buf); + res->buf = kzalloc(len, GFP_ATOMIC); + } + if (unlikely(res->buf == NULL)) + return -ENOMEM; + + res->buf_len = len; + memcpy(res->buf, buf, len); + return 0; +} +EXPORT_SYMBOL(iwl_calib_set); + +void iwl_calib_free_results(struct iwl_priv *priv) +{ + int i; + + for (i = 0; i < IWL_CALIB_MAX; i++) { + kfree(priv->calib_results[i].buf); + priv->calib_results[i].buf = NULL; + priv->calib_results[i].buf_len = 0; + } +} + +/***************************************************************************** + * RUNTIME calibrations framework + *****************************************************************************/ + +/* "false alarms" are signals that our DSP tries to lock onto, + * but then determines that they are either noise, or transmissions + * from a distant wireless network (also "noise", really) that get + * "stepped on" by stronger transmissions within our own network. + * This algorithm attempts to set a sensitivity level that is high + * enough to receive all of our own network traffic, but not so + * high that our DSP gets too busy trying to lock onto non-network + * activity/noise. */ +static int iwl_sens_energy_cck(struct iwl_priv *priv, + u32 norm_fa, + u32 rx_enable_time, + struct statistics_general_data *rx_info) +{ + u32 max_nrg_cck = 0; + int i = 0; + u8 max_silence_rssi = 0; + u32 silence_ref = 0; + u8 silence_rssi_a = 0; + u8 silence_rssi_b = 0; + u8 silence_rssi_c = 0; + u32 val; + + /* "false_alarms" values below are cross-multiplications to assess the + * numbers of false alarms within the measured period of actual Rx + * (Rx is off when we're txing), vs the min/max expected false alarms + * (some should be expected if rx is sensitive enough) in a + * hypothetical listening period of 200 time units (TU), 204.8 msec: + * + * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time + * + * */ + u32 false_alarms = norm_fa * 200 * 1024; + u32 max_false_alarms = MAX_FA_CCK * rx_enable_time; + u32 min_false_alarms = MIN_FA_CCK * rx_enable_time; + struct iwl_sensitivity_data *data = NULL; + const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens; + + data = &(priv->sensitivity_data); + + data->nrg_auto_corr_silence_diff = 0; + + /* Find max silence rssi among all 3 receivers. + * This is background noise, which may include transmissions from other + * networks, measured during silence before our network's beacon */ + silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a & + ALL_BAND_FILTER) >> 8); + silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b & + ALL_BAND_FILTER) >> 8); + silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c & + ALL_BAND_FILTER) >> 8); + + val = max(silence_rssi_b, silence_rssi_c); + max_silence_rssi = max(silence_rssi_a, (u8) val); + + /* Store silence rssi in 20-beacon history table */ + data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi; + data->nrg_silence_idx++; + if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L) + data->nrg_silence_idx = 0; + + /* Find max silence rssi across 20 beacon history */ + for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) { + val = data->nrg_silence_rssi[i]; + silence_ref = max(silence_ref, val); + } + IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n", + silence_rssi_a, silence_rssi_b, silence_rssi_c, + silence_ref); + + /* Find max rx energy (min value!) among all 3 receivers, + * measured during beacon frame. + * Save it in 10-beacon history table. */ + i = data->nrg_energy_idx; + val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c); + data->nrg_value[i] = min(rx_info->beacon_energy_a, val); + + data->nrg_energy_idx++; + if (data->nrg_energy_idx >= 10) + data->nrg_energy_idx = 0; + + /* Find min rx energy (max value) across 10 beacon history. + * This is the minimum signal level that we want to receive well. + * Add backoff (margin so we don't miss slightly lower energy frames). + * This establishes an upper bound (min value) for energy threshold. */ + max_nrg_cck = data->nrg_value[0]; + for (i = 1; i < 10; i++) + max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i])); + max_nrg_cck += 6; + + IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n", + rx_info->beacon_energy_a, rx_info->beacon_energy_b, + rx_info->beacon_energy_c, max_nrg_cck - 6); + + /* Count number of consecutive beacons with fewer-than-desired + * false alarms. */ + if (false_alarms < min_false_alarms) + data->num_in_cck_no_fa++; + else + data->num_in_cck_no_fa = 0; + IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n", + data->num_in_cck_no_fa); + + /* If we got too many false alarms this time, reduce sensitivity */ + if ((false_alarms > max_false_alarms) && + (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) { + IWL_DEBUG_CALIB("norm FA %u > max FA %u\n", + false_alarms, max_false_alarms); + IWL_DEBUG_CALIB("... reducing sensitivity\n"); + data->nrg_curr_state = IWL_FA_TOO_MANY; + /* Store for "fewer than desired" on later beacon */ + data->nrg_silence_ref = silence_ref; + + /* increase energy threshold (reduce nrg value) + * to decrease sensitivity */ + if (data->nrg_th_cck > + (ranges->max_nrg_cck + NRG_STEP_CCK)) + data->nrg_th_cck = data->nrg_th_cck + - NRG_STEP_CCK; + else + data->nrg_th_cck = ranges->max_nrg_cck; + /* Else if we got fewer than desired, increase sensitivity */ + } else if (false_alarms < min_false_alarms) { + data->nrg_curr_state = IWL_FA_TOO_FEW; + + /* Compare silence level with silence level for most recent + * healthy number or too many false alarms */ + data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref - + (s32)silence_ref; + + IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n", + false_alarms, min_false_alarms, + data->nrg_auto_corr_silence_diff); + + /* Increase value to increase sensitivity, but only if: + * 1a) previous beacon did *not* have *too many* false alarms + * 1b) AND there's a significant difference in Rx levels + * from a previous beacon with too many, or healthy # FAs + * OR 2) We've seen a lot of beacons (100) with too few + * false alarms */ + if ((data->nrg_prev_state != IWL_FA_TOO_MANY) && + ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || + (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { + + IWL_DEBUG_CALIB("... increasing sensitivity\n"); + /* Increase nrg value to increase sensitivity */ + val = data->nrg_th_cck + NRG_STEP_CCK; + data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val); + } else { + IWL_DEBUG_CALIB("... but not changing sensitivity\n"); + } + + /* Else we got a healthy number of false alarms, keep status quo */ + } else { + IWL_DEBUG_CALIB(" FA in safe zone\n"); + data->nrg_curr_state = IWL_FA_GOOD_RANGE; + + /* Store for use in "fewer than desired" with later beacon */ + data->nrg_silence_ref = silence_ref; + + /* If previous beacon had too many false alarms, + * give it some extra margin by reducing sensitivity again + * (but don't go below measured energy of desired Rx) */ + if (IWL_FA_TOO_MANY == data->nrg_prev_state) { + IWL_DEBUG_CALIB("... increasing margin\n"); + if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN)) + data->nrg_th_cck -= NRG_MARGIN; + else + data->nrg_th_cck = max_nrg_cck; + } + } + + /* Make sure the energy threshold does not go above the measured + * energy of the desired Rx signals (reduced by backoff margin), + * or else we might start missing Rx frames. + * Lower value is higher energy, so we use max()! + */ + data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck); + IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck); + + data->nrg_prev_state = data->nrg_curr_state; + + /* Auto-correlation CCK algorithm */ + if (false_alarms > min_false_alarms) { + + /* increase auto_corr values to decrease sensitivity + * so the DSP won't be disturbed by the noise + */ + if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK) + data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1; + else { + val = data->auto_corr_cck + AUTO_CORR_STEP_CCK; + data->auto_corr_cck = + min((u32)ranges->auto_corr_max_cck, val); + } + val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK; + data->auto_corr_cck_mrc = + min((u32)ranges->auto_corr_max_cck_mrc, val); + } else if ((false_alarms < min_false_alarms) && + ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || + (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { + + /* Decrease auto_corr values to increase sensitivity */ + val = data->auto_corr_cck - AUTO_CORR_STEP_CCK; + data->auto_corr_cck = + max((u32)ranges->auto_corr_min_cck, val); + val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK; + data->auto_corr_cck_mrc = + max((u32)ranges->auto_corr_min_cck_mrc, val); + } + + return 0; +} + + +static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv, + u32 norm_fa, + u32 rx_enable_time) +{ + u32 val; + u32 false_alarms = norm_fa * 200 * 1024; + u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time; + u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time; + struct iwl_sensitivity_data *data = NULL; + const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens; + + data = &(priv->sensitivity_data); + + /* If we got too many false alarms this time, reduce sensitivity */ + if (false_alarms > max_false_alarms) { + + IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n", + false_alarms, max_false_alarms); + + val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm = + min((u32)ranges->auto_corr_max_ofdm, val); + + val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc = + min((u32)ranges->auto_corr_max_ofdm_mrc, val); + + val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_x1 = + min((u32)ranges->auto_corr_max_ofdm_x1, val); + + val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc_x1 = + min((u32)ranges->auto_corr_max_ofdm_mrc_x1, val); + } + + /* Else if we got fewer than desired, increase sensitivity */ + else if (false_alarms < min_false_alarms) { + + IWL_DEBUG_CALIB("norm FA %u < min FA %u\n", + false_alarms, min_false_alarms); + + val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm = + max((u32)ranges->auto_corr_min_ofdm, val); + + val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc = + max((u32)ranges->auto_corr_min_ofdm_mrc, val); + + val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_x1 = + max((u32)ranges->auto_corr_min_ofdm_x1, val); + + val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc_x1 = + max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val); + } else { + IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n", + min_false_alarms, false_alarms, max_false_alarms); + } + return 0; +} + +/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */ +static int iwl_sensitivity_write(struct iwl_priv *priv) +{ + int ret = 0; + struct iwl_sensitivity_cmd cmd ; + struct iwl_sensitivity_data *data = NULL; + struct iwl_host_cmd cmd_out = { + .id = SENSITIVITY_CMD, + .len = sizeof(struct iwl_sensitivity_cmd), + .meta.flags = CMD_ASYNC, + .data = &cmd, + }; + + data = &(priv->sensitivity_data); + + memset(&cmd, 0, sizeof(cmd)); + + cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm); + cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm_mrc); + cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm_x1); + cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1); + + cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] = + cpu_to_le16((u16)data->auto_corr_cck); + cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16((u16)data->auto_corr_cck_mrc); + + cmd.table[HD_MIN_ENERGY_CCK_DET_INDEX] = + cpu_to_le16((u16)data->nrg_th_cck); + cmd.table[HD_MIN_ENERGY_OFDM_DET_INDEX] = + cpu_to_le16((u16)data->nrg_th_ofdm); + + cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] = + __constant_cpu_to_le16(190); + cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] = + __constant_cpu_to_le16(390); + cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] = + __constant_cpu_to_le16(62); + + IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n", + data->auto_corr_ofdm, data->auto_corr_ofdm_mrc, + data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1, + data->nrg_th_ofdm); + + IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n", + data->auto_corr_cck, data->auto_corr_cck_mrc, + data->nrg_th_cck); + + /* Update uCode's "work" table, and copy it to DSP */ + cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE; + + /* Don't send command to uCode if nothing has changed */ + if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]), + sizeof(u16)*HD_TABLE_SIZE)) { + IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n"); + return 0; + } + + /* Copy table for comparison next time */ + memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]), + sizeof(u16)*HD_TABLE_SIZE); + + ret = iwl_send_cmd(priv, &cmd_out); + if (ret) + IWL_ERROR("SENSITIVITY_CMD failed\n"); + + return ret; +} + +void iwl_init_sensitivity(struct iwl_priv *priv) +{ + int ret = 0; + int i; + struct iwl_sensitivity_data *data = NULL; + const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens; + + if (priv->disable_sens_cal) + return; + + IWL_DEBUG_CALIB("Start iwl_init_sensitivity\n"); + + /* Clear driver's sensitivity algo data */ + data = &(priv->sensitivity_data); + + if (ranges == NULL) + return; + + memset(data, 0, sizeof(struct iwl_sensitivity_data)); + + data->num_in_cck_no_fa = 0; + data->nrg_curr_state = IWL_FA_TOO_MANY; + data->nrg_prev_state = IWL_FA_TOO_MANY; + data->nrg_silence_ref = 0; + data->nrg_silence_idx = 0; + data->nrg_energy_idx = 0; + + for (i = 0; i < 10; i++) + data->nrg_value[i] = 0; + + for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) + data->nrg_silence_rssi[i] = 0; + + data->auto_corr_ofdm = 90; + data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc; + data->auto_corr_ofdm_x1 = ranges->auto_corr_min_ofdm_x1; + data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1; + data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF; + data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc; + data->nrg_th_cck = ranges->nrg_th_cck; + data->nrg_th_ofdm = ranges->nrg_th_ofdm; + + data->last_bad_plcp_cnt_ofdm = 0; + data->last_fa_cnt_ofdm = 0; + data->last_bad_plcp_cnt_cck = 0; + data->last_fa_cnt_cck = 0; + + ret |= iwl_sensitivity_write(priv); + IWL_DEBUG_CALIB("<<return 0x%X\n", ret); +} +EXPORT_SYMBOL(iwl_init_sensitivity); + +void iwl_sensitivity_calibration(struct iwl_priv *priv, + struct iwl_notif_statistics *resp) +{ + u32 rx_enable_time; + u32 fa_cck; + u32 fa_ofdm; + u32 bad_plcp_cck; + u32 bad_plcp_ofdm; + u32 norm_fa_ofdm; + u32 norm_fa_cck; + struct iwl_sensitivity_data *data = NULL; + struct statistics_rx_non_phy *rx_info = &(resp->rx.general); + struct statistics_rx *statistics = &(resp->rx); + unsigned long flags; + struct statistics_general_data statis; + + if (priv->disable_sens_cal) + return; + + data = &(priv->sensitivity_data); + + if (!iwl_is_associated(priv)) { + IWL_DEBUG_CALIB("<< - not associated\n"); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { + IWL_DEBUG_CALIB("<< invalid data.\n"); + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + + /* Extract Statistics: */ + rx_enable_time = le32_to_cpu(rx_info->channel_load); + fa_cck = le32_to_cpu(statistics->cck.false_alarm_cnt); + fa_ofdm = le32_to_cpu(statistics->ofdm.false_alarm_cnt); + bad_plcp_cck = le32_to_cpu(statistics->cck.plcp_err); + bad_plcp_ofdm = le32_to_cpu(statistics->ofdm.plcp_err); + + statis.beacon_silence_rssi_a = + le32_to_cpu(statistics->general.beacon_silence_rssi_a); + statis.beacon_silence_rssi_b = + le32_to_cpu(statistics->general.beacon_silence_rssi_b); + statis.beacon_silence_rssi_c = + le32_to_cpu(statistics->general.beacon_silence_rssi_c); + statis.beacon_energy_a = + le32_to_cpu(statistics->general.beacon_energy_a); + statis.beacon_energy_b = + le32_to_cpu(statistics->general.beacon_energy_b); + statis.beacon_energy_c = + le32_to_cpu(statistics->general.beacon_energy_c); + + spin_unlock_irqrestore(&priv->lock, flags); + + IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time); + + if (!rx_enable_time) { + IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n"); + return; + } + + /* These statistics increase monotonically, and do not reset + * at each beacon. Calculate difference from last value, or just + * use the new statistics value if it has reset or wrapped around. */ + if (data->last_bad_plcp_cnt_cck > bad_plcp_cck) + data->last_bad_plcp_cnt_cck = bad_plcp_cck; + else { + bad_plcp_cck -= data->last_bad_plcp_cnt_cck; + data->last_bad_plcp_cnt_cck += bad_plcp_cck; + } + + if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm) + data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm; + else { + bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm; + data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm; + } + + if (data->last_fa_cnt_ofdm > fa_ofdm) + data->last_fa_cnt_ofdm = fa_ofdm; + else { + fa_ofdm -= data->last_fa_cnt_ofdm; + data->last_fa_cnt_ofdm += fa_ofdm; + } + + if (data->last_fa_cnt_cck > fa_cck) + data->last_fa_cnt_cck = fa_cck; + else { + fa_cck -= data->last_fa_cnt_cck; + data->last_fa_cnt_cck += fa_cck; + } + + /* Total aborted signal locks */ + norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm; + norm_fa_cck = fa_cck + bad_plcp_cck; + + IWL_DEBUG_CALIB("cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck, + bad_plcp_cck, fa_ofdm, bad_plcp_ofdm); + + iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time); + iwl_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis); + iwl_sensitivity_write(priv); + + return; +} +EXPORT_SYMBOL(iwl_sensitivity_calibration); + +/* + * Accumulate 20 beacons of signal and noise statistics for each of + * 3 receivers/antennas/rx-chains, then figure out: + * 1) Which antennas are connected. + * 2) Differential rx gain settings to balance the 3 receivers. + */ +void iwl_chain_noise_calibration(struct iwl_priv *priv, + struct iwl_notif_statistics *stat_resp) +{ + struct iwl_chain_noise_data *data = NULL; + + u32 chain_noise_a; + u32 chain_noise_b; + u32 chain_noise_c; + u32 chain_sig_a; + u32 chain_sig_b; + u32 chain_sig_c; + u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; + u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; + u32 max_average_sig; + u16 max_average_sig_antenna_i; + u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE; + u16 min_average_noise_antenna_i = INITIALIZATION_VALUE; + u16 i = 0; + u16 rxon_chnum = INITIALIZATION_VALUE; + u16 stat_chnum = INITIALIZATION_VALUE; + u8 rxon_band24; + u8 stat_band24; + u32 active_chains = 0; + u8 num_tx_chains; + unsigned long flags; + struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general); + + if (priv->disable_chain_noise_cal) + return; + + data = &(priv->chain_noise_data); + + /* Accumulate just the first 20 beacons after the first association, + * then we're done forever. */ + if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) { + if (data->state == IWL_CHAIN_NOISE_ALIVE) + IWL_DEBUG_CALIB("Wait for noise calib reset\n"); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { + IWL_DEBUG_CALIB(" << Interference data unavailable\n"); + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + + rxon_band24 = !!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK); + rxon_chnum = le16_to_cpu(priv->staging_rxon.channel); + stat_band24 = !!(stat_resp->flag & STATISTICS_REPLY_FLG_BAND_24G_MSK); + stat_chnum = le32_to_cpu(stat_resp->flag) >> 16; + + /* Make sure we accumulate data for just the associated channel + * (even if scanning). */ + if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) { + IWL_DEBUG_CALIB("Stats not from chan=%d, band24=%d\n", + rxon_chnum, rxon_band24); + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + + /* Accumulate beacon statistics values across 20 beacons */ + chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) & + IN_BAND_FILTER; + chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) & + IN_BAND_FILTER; + chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) & + IN_BAND_FILTER; + + chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER; + chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER; + chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER; + + spin_unlock_irqrestore(&priv->lock, flags); + + data->beacon_count++; + + data->chain_noise_a = (chain_noise_a + data->chain_noise_a); + data->chain_noise_b = (chain_noise_b + data->chain_noise_b); + data->chain_noise_c = (chain_noise_c + data->chain_noise_c); + + data->chain_signal_a = (chain_sig_a + data->chain_signal_a); + data->chain_signal_b = (chain_sig_b + data->chain_signal_b); + data->chain_signal_c = (chain_sig_c + data->chain_signal_c); + + IWL_DEBUG_CALIB("chan=%d, band24=%d, beacon=%d\n", + rxon_chnum, rxon_band24, data->beacon_count); + IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n", + chain_sig_a, chain_sig_b, chain_sig_c); + IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n", + chain_noise_a, chain_noise_b, chain_noise_c); + + /* If this is the 20th beacon, determine: + * 1) Disconnected antennas (using signal strengths) + * 2) Differential gain (using silence noise) to balance receivers */ + if (data->beacon_count != CAL_NUM_OF_BEACONS) + return; + + /* Analyze signal for disconnected antenna */ + average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS; + average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS; + average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS; + + if (average_sig[0] >= average_sig[1]) { + max_average_sig = average_sig[0]; + max_average_sig_antenna_i = 0; + active_chains = (1 << max_average_sig_antenna_i); + } else { + max_average_sig = average_sig[1]; + max_average_sig_antenna_i = 1; + active_chains = (1 << max_average_sig_antenna_i); + } + + if (average_sig[2] >= max_average_sig) { + max_average_sig = average_sig[2]; + max_average_sig_antenna_i = 2; + active_chains = (1 << max_average_sig_antenna_i); + } + + IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n", + average_sig[0], average_sig[1], average_sig[2]); + IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n", + max_average_sig, max_average_sig_antenna_i); + + /* Compare signal strengths for all 3 receivers. */ + for (i = 0; i < NUM_RX_CHAINS; i++) { + if (i != max_average_sig_antenna_i) { + s32 rssi_delta = (max_average_sig - average_sig[i]); + + /* If signal is very weak, compared with + * strongest, mark it as disconnected. */ + if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS) + data->disconn_array[i] = 1; + else + active_chains |= (1 << i); + IWL_DEBUG_CALIB("i = %d rssiDelta = %d " + "disconn_array[i] = %d\n", + i, rssi_delta, data->disconn_array[i]); + } + } + + num_tx_chains = 0; + for (i = 0; i < NUM_RX_CHAINS; i++) { + /* loops on all the bits of + * priv->hw_setting.valid_tx_ant */ + u8 ant_msk = (1 << i); + if (!(priv->hw_params.valid_tx_ant & ant_msk)) + continue; + + num_tx_chains++; + if (data->disconn_array[i] == 0) + /* there is a Tx antenna connected */ + break; + if (num_tx_chains == priv->hw_params.tx_chains_num && + data->disconn_array[i]) { + /* This is the last TX antenna and is also + * disconnected connect it anyway */ + data->disconn_array[i] = 0; + active_chains |= ant_msk; + IWL_DEBUG_CALIB("All Tx chains are disconnected W/A - " + "declare %d as connected\n", i); + break; + } + } + + IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n", + active_chains); + + /* Save for use within RXON, TX, SCAN commands, etc. */ + /*priv->valid_antenna = active_chains;*/ + /*FIXME: should be reflected in RX chains in RXON */ + + /* Analyze noise for rx balance */ + average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS); + average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS); + average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS); + + for (i = 0; i < NUM_RX_CHAINS; i++) { + if (!(data->disconn_array[i]) && + (average_noise[i] <= min_average_noise)) { + /* This means that chain i is active and has + * lower noise values so far: */ + min_average_noise = average_noise[i]; + min_average_noise_antenna_i = i; + } + } + + IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n", + average_noise[0], average_noise[1], + average_noise[2]); + + IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n", + min_average_noise, min_average_noise_antenna_i); + + priv->cfg->ops->utils->gain_computation(priv, average_noise, + min_average_noise_antenna_i, min_average_noise); +} +EXPORT_SYMBOL(iwl_chain_noise_calibration); + + +void iwl_reset_run_time_calib(struct iwl_priv *priv) +{ + int i; + memset(&(priv->sensitivity_data), 0, + sizeof(struct iwl_sensitivity_data)); + memset(&(priv->chain_noise_data), 0, + sizeof(struct iwl_chain_noise_data)); + for (i = 0; i < NUM_RX_CHAINS; i++) + priv->chain_noise_data.delta_gain_code[i] = + CHAIN_NOISE_DELTA_GAIN_INIT_VAL; + + /* Ask for statistics now, the uCode will send notification + * periodically after association */ + iwl_send_statistics_request(priv, CMD_ASYNC); +} +EXPORT_SYMBOL(iwl_reset_run_time_calib); + diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.h b/drivers/net/wireless/iwlwifi/iwl-calib.h new file mode 100644 index 0000000..94c8e31 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-calib.h @@ -0,0 +1,84 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Tomas Winkler <tomas.winkler@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ +#ifndef __iwl_calib_h__ +#define __iwl_calib_h__ + +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-commands.h" + +void iwl_chain_noise_calibration(struct iwl_priv *priv, + struct iwl_notif_statistics *stat_resp); +void iwl_sensitivity_calibration(struct iwl_priv *priv, + struct iwl_notif_statistics *resp); + +void iwl_init_sensitivity(struct iwl_priv *priv); +void iwl_reset_run_time_calib(struct iwl_priv *priv); +static inline void iwl_chain_noise_reset(struct iwl_priv *priv) +{ + + if (!priv->disable_chain_noise_cal && + priv->cfg->ops->utils->chain_noise_reset) + priv->cfg->ops->utils->chain_noise_reset(priv); +} + +#endif /* __iwl_calib_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index e69de29..b0174b2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -0,0 +1,3043 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +/* + * Please use this file (iwl-commands.h) only for uCode API definitions. + * Please use iwl-4965-hw.h for hardware-related definitions. + * Please use iwl-dev.h for driver implementation definitions. + */ + +#ifndef __iwl4965_commands_h__ +#define __iwl4965_commands_h__ + +enum { + REPLY_ALIVE = 0x1, + REPLY_ERROR = 0x2, + + /* RXON and QOS commands */ + REPLY_RXON = 0x10, + REPLY_RXON_ASSOC = 0x11, + REPLY_QOS_PARAM = 0x13, + REPLY_RXON_TIMING = 0x14, + + /* Multi-Station support */ + REPLY_ADD_STA = 0x18, + REPLY_REMOVE_STA = 0x19, /* not used */ + REPLY_REMOVE_ALL_STA = 0x1a, /* not used */ + + /* Security */ + REPLY_WEPKEY = 0x20, + + /* RX, TX, LEDs */ + REPLY_TX = 0x1c, + REPLY_RATE_SCALE = 0x47, /* 3945 only */ + REPLY_LEDS_CMD = 0x48, + REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */ + + /* WiMAX coexistence */ + COEX_PRIORITY_TABLE_CMD = 0x5a, /*5000 only */ + COEX_MEDIUM_NOTIFICATION = 0x5b, + COEX_EVENT_CMD = 0x5c, + + /* 802.11h related */ + RADAR_NOTIFICATION = 0x70, /* not used */ + REPLY_QUIET_CMD = 0x71, /* not used */ + REPLY_CHANNEL_SWITCH = 0x72, + CHANNEL_SWITCH_NOTIFICATION = 0x73, + REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74, + SPECTRUM_MEASURE_NOTIFICATION = 0x75, + + /* Power Management */ + POWER_TABLE_CMD = 0x77, + PM_SLEEP_NOTIFICATION = 0x7A, + PM_DEBUG_STATISTIC_NOTIFIC = 0x7B, + + /* Scan commands and notifications */ + REPLY_SCAN_CMD = 0x80, + REPLY_SCAN_ABORT_CMD = 0x81, + SCAN_START_NOTIFICATION = 0x82, + SCAN_RESULTS_NOTIFICATION = 0x83, + SCAN_COMPLETE_NOTIFICATION = 0x84, + + /* IBSS/AP commands */ + BEACON_NOTIFICATION = 0x90, + REPLY_TX_BEACON = 0x91, + WHO_IS_AWAKE_NOTIFICATION = 0x94, /* not used */ + + /* Miscellaneous commands */ + QUIET_NOTIFICATION = 0x96, /* not used */ + REPLY_TX_PWR_TABLE_CMD = 0x97, + REPLY_TX_POWER_DBM_CMD = 0x98, + MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ + + /* Bluetooth device coexistance config command */ + REPLY_BT_CONFIG = 0x9b, + + /* Statistics */ + REPLY_STATISTICS_CMD = 0x9c, + STATISTICS_NOTIFICATION = 0x9d, + + /* RF-KILL commands and notifications */ + REPLY_CARD_STATE_CMD = 0xa0, + CARD_STATE_NOTIFICATION = 0xa1, + + /* Missed beacons notification */ + MISSED_BEACONS_NOTIFICATION = 0xa2, + + REPLY_CT_KILL_CONFIG_CMD = 0xa4, + SENSITIVITY_CMD = 0xa8, + REPLY_PHY_CALIBRATION_CMD = 0xb0, + REPLY_RX_PHY_CMD = 0xc0, + REPLY_RX_MPDU_CMD = 0xc1, + REPLY_RX = 0xc3, + REPLY_COMPRESSED_BA = 0xc5, + REPLY_MAX = 0xff +}; + +/****************************************************************************** + * (0) + * Commonly used structures and definitions: + * Command header, rate_n_flags, txpower + * + *****************************************************************************/ + +/* iwl_cmd_header flags value */ +#define IWL_CMD_FAILED_MSK 0x40 + +/** + * struct iwl_cmd_header + * + * This header format appears in the beginning of each command sent from the + * driver, and each response/notification received from uCode. + */ +struct iwl_cmd_header { + u8 cmd; /* Command ID: REPLY_RXON, etc. */ + u8 flags; /* IWL_CMD_* */ + /* + * The driver sets up the sequence number to values of its chosing. + * uCode does not use this value, but passes it back to the driver + * when sending the response to each driver-originated command, so + * the driver can match the response to the command. Since the values + * don't get used by uCode, the driver may set up an arbitrary format. + * + * There is one exception: uCode sets bit 15 when it originates + * the response/notification, i.e. when the response/notification + * is not a direct response to a command sent by the driver. For + * example, uCode issues REPLY_3945_RX when it sends a received frame + * to the driver; it is not a direct response to any driver command. + * + * The Linux driver uses the following format: + * + * 0:7 index/position within Tx queue + * 8:13 Tx queue selection + * 14:14 driver sets this to indicate command is in the 'huge' + * storage at the end of the command buffers, i.e. scan cmd + * 15:15 uCode sets this in uCode-originated response/notification + */ + __le16 sequence; + + /* command or response/notification data follows immediately */ + u8 data[0]; +} __attribute__ ((packed)); + +/** + * 4965 rate_n_flags bit fields + * + * rate_n_flags format is used in following 4965 commands: + * REPLY_RX (response only) + * REPLY_TX (both command and response) + * REPLY_TX_LINK_QUALITY_CMD + * + * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"): + * 2-0: 0) 6 Mbps + * 1) 12 Mbps + * 2) 18 Mbps + * 3) 24 Mbps + * 4) 36 Mbps + * 5) 48 Mbps + * 6) 54 Mbps + * 7) 60 Mbps + * + * 3: 0) Single stream (SISO) + * 1) Dual stream (MIMO) + * + * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data + * + * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"): + * 3-0: 0xD) 6 Mbps + * 0xF) 9 Mbps + * 0x5) 12 Mbps + * 0x7) 18 Mbps + * 0x9) 24 Mbps + * 0xB) 36 Mbps + * 0x1) 48 Mbps + * 0x3) 54 Mbps + * + * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"): + * 3-0: 10) 1 Mbps + * 20) 2 Mbps + * 55) 5.5 Mbps + * 110) 11 Mbps + */ +#define RATE_MCS_CODE_MSK 0x7 +#define RATE_MCS_MIMO_POS 3 +#define RATE_MCS_MIMO_MSK 0x8 +#define RATE_MCS_HT_DUP_POS 5 +#define RATE_MCS_HT_DUP_MSK 0x20 + +/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */ +#define RATE_MCS_FLAGS_POS 8 +#define RATE_MCS_HT_POS 8 +#define RATE_MCS_HT_MSK 0x100 + +/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ +#define RATE_MCS_CCK_POS 9 +#define RATE_MCS_CCK_MSK 0x200 + +/* Bit 10: (1) Use Green Field preamble */ +#define RATE_MCS_GF_POS 10 +#define RATE_MCS_GF_MSK 0x400 + +/* Bit 11: (1) Use 40Mhz FAT chnl width, (0) use 20 MHz legacy chnl width */ +#define RATE_MCS_FAT_POS 11 +#define RATE_MCS_FAT_MSK 0x800 + +/* Bit 12: (1) Duplicate data on both 20MHz chnls. FAT (bit 11) must be set. */ +#define RATE_MCS_DUP_POS 12 +#define RATE_MCS_DUP_MSK 0x1000 + +/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ +#define RATE_MCS_SGI_POS 13 +#define RATE_MCS_SGI_MSK 0x2000 + +/** + * rate_n_flags Tx antenna masks (4965 has 2 transmitters): + * bit14:15 01 B inactive, A active + * 10 B active, A inactive + * 11 Both active + */ +#define RATE_MCS_ANT_POS 14 +#define RATE_MCS_ANT_A_MSK 0x04000 +#define RATE_MCS_ANT_B_MSK 0x08000 +#define RATE_MCS_ANT_C_MSK 0x10000 +#define RATE_MCS_ANT_ABC_MSK 0x1C000 + +#define RATE_MCS_ANT_INIT_IND 1 + +#define POWER_TABLE_NUM_ENTRIES 33 +#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32 +#define POWER_TABLE_CCK_ENTRY 32 + +/** + * union iwl4965_tx_power_dual_stream + * + * Host format used for REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH + * Use __le32 version (struct tx_power_dual_stream) when building command. + * + * Driver provides radio gain and DSP attenuation settings to device in pairs, + * one value for each transmitter chain. The first value is for transmitter A, + * second for transmitter B. + * + * For SISO bit rates, both values in a pair should be identical. + * For MIMO rates, one value may be different from the other, + * in order to balance the Tx output between the two transmitters. + * + * See more details in doc for TXPOWER in iwl-4965-hw.h. + */ +union iwl4965_tx_power_dual_stream { + struct { + u8 radio_tx_gain[2]; + u8 dsp_predis_atten[2]; + } s; + u32 dw; +}; + +/** + * struct tx_power_dual_stream + * + * Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH + * + * Same format as iwl_tx_power_dual_stream, but __le32 + */ +struct tx_power_dual_stream { + __le32 dw; +} __attribute__ ((packed)); + +/** + * struct iwl4965_tx_power_db + * + * Entire table within REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH + */ +struct iwl4965_tx_power_db { + struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES]; +} __attribute__ ((packed)); + +/** + * Commad REPLY_TX_POWER_DBM_CMD = 0x98 + * struct iwl5000_tx_power_dbm_cmd + */ +#define IWL50_TX_POWER_AUTO 0x7f +#define IWL50_TX_POWER_NO_CLOSED (0x1 << 6) + +struct iwl5000_tx_power_dbm_cmd { + s8 global_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */ + u8 flags; + s8 srv_chan_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */ + u8 reserved; +} __attribute__ ((packed)); + +/****************************************************************************** + * (0a) + * Alive and Error Commands & Responses: + * + *****************************************************************************/ + +#define UCODE_VALID_OK __constant_cpu_to_le32(0x1) +#define INITIALIZE_SUBTYPE (9) + +/* + * ("Initialize") REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "initialize alive" notification once the initialization + * uCode image has completed its work, and is ready to load the runtime image. + * This is the *first* "alive" notification that the driver will receive after + * rebooting uCode; the "initialize" alive is indicated by subtype field == 9. + * + * See comments documenting "BSM" (bootstrap state machine). + * + * For 4965, this notification contains important calibration data for + * calculating txpower settings: + * + * 1) Power supply voltage indication. The voltage sensor outputs higher + * values for lower voltage, and vice versa. + * + * 2) Temperature measurement parameters, for each of two channel widths + * (20 MHz and 40 MHz) supported by the radios. Temperature sensing + * is done via one of the receiver chains, and channel width influences + * the results. + * + * 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation, + * for each of 5 frequency ranges. + */ +struct iwl_init_alive_resp { + u8 ucode_minor; + u8 ucode_major; + __le16 reserved1; + u8 sw_rev[8]; + u8 ver_type; + u8 ver_subtype; /* "9" for initialize alive */ + __le16 reserved2; + __le32 log_event_table_ptr; + __le32 error_event_table_ptr; + __le32 timestamp; + __le32 is_valid; + + /* calibration values from "initialize" uCode */ + __le32 voltage; /* signed, higher value is lower voltage */ + __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for FAT channel*/ + __le32 therm_r2[2]; /* signed */ + __le32 therm_r3[2]; /* signed */ + __le32 therm_r4[2]; /* signed */ + __le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups, + * 2 Tx chains */ +} __attribute__ ((packed)); + + +/** + * REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "alive" notification once the runtime image is ready + * to receive commands from the driver. This is the *second* "alive" + * notification that the driver will receive after rebooting uCode; + * this "alive" is indicated by subtype field != 9. + * + * See comments documenting "BSM" (bootstrap state machine). + * + * This response includes two pointers to structures within the device's + * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: + * + * 1) log_event_table_ptr indicates base of the event log. This traces + * a 256-entry history of uCode execution within a circular buffer. + * Its header format is: + * + * __le32 log_size; log capacity (in number of entries) + * __le32 type; (1) timestamp with each entry, (0) no timestamp + * __le32 wraps; # times uCode has wrapped to top of circular buffer + * __le32 write_index; next circular buffer entry that uCode would fill + * + * The header is followed by the circular buffer of log entries. Entries + * with timestamps have the following format: + * + * __le32 event_id; range 0 - 1500 + * __le32 timestamp; low 32 bits of TSF (of network, if associated) + * __le32 data; event_id-specific data value + * + * Entries without timestamps contain only event_id and data. + * + * 2) error_event_table_ptr indicates base of the error log. This contains + * information about any uCode error that occurs. For 4965, the format + * of the error log is: + * + * __le32 valid; (nonzero) valid, (0) log is empty + * __le32 error_id; type of error + * __le32 pc; program counter + * __le32 blink1; branch link + * __le32 blink2; branch link + * __le32 ilink1; interrupt link + * __le32 ilink2; interrupt link + * __le32 data1; error-specific data + * __le32 data2; error-specific data + * __le32 line; source code line of error + * __le32 bcon_time; beacon timer + * __le32 tsf_low; network timestamp function timer + * __le32 tsf_hi; network timestamp function timer + * + * The Linux driver can print both logs to the system log when a uCode error + * occurs. + */ +struct iwl_alive_resp { + u8 ucode_minor; + u8 ucode_major; + __le16 reserved1; + u8 sw_rev[8]; + u8 ver_type; + u8 ver_subtype; /* not "9" for runtime alive */ + __le16 reserved2; + __le32 log_event_table_ptr; /* SRAM address for event log */ + __le32 error_event_table_ptr; /* SRAM address for error log */ + __le32 timestamp; + __le32 is_valid; +} __attribute__ ((packed)); + + +union tsf { + u8 byte[8]; + __le16 word[4]; + __le32 dw[2]; +}; + +/* + * REPLY_ERROR = 0x2 (response only, not a command) + */ +struct iwl_error_resp { + __le32 error_type; + u8 cmd_id; + u8 reserved1; + __le16 bad_cmd_seq_num; + __le32 error_info; + union tsf timestamp; +} __attribute__ ((packed)); + +/****************************************************************************** + * (1) + * RXON Commands & Responses: + * + *****************************************************************************/ + +/* + * Rx config defines & structure + */ +/* rx_config device types */ +enum { + RXON_DEV_TYPE_AP = 1, + RXON_DEV_TYPE_ESS = 3, + RXON_DEV_TYPE_IBSS = 4, + RXON_DEV_TYPE_SNIFFER = 6, +}; + + +#define RXON_RX_CHAIN_DRIVER_FORCE_MSK __constant_cpu_to_le16(0x1 << 0) +#define RXON_RX_CHAIN_VALID_MSK __constant_cpu_to_le16(0x7 << 1) +#define RXON_RX_CHAIN_VALID_POS (1) +#define RXON_RX_CHAIN_FORCE_SEL_MSK __constant_cpu_to_le16(0x7 << 4) +#define RXON_RX_CHAIN_FORCE_SEL_POS (4) +#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK __constant_cpu_to_le16(0x7 << 7) +#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7) +#define RXON_RX_CHAIN_CNT_MSK __constant_cpu_to_le16(0x3 << 10) +#define RXON_RX_CHAIN_CNT_POS (10) +#define RXON_RX_CHAIN_MIMO_CNT_MSK __constant_cpu_to_le16(0x3 << 12) +#define RXON_RX_CHAIN_MIMO_CNT_POS (12) +#define RXON_RX_CHAIN_MIMO_FORCE_MSK __constant_cpu_to_le16(0x1 << 14) +#define RXON_RX_CHAIN_MIMO_FORCE_POS (14) + +/* rx_config flags */ +/* band & modulation selection */ +#define RXON_FLG_BAND_24G_MSK __constant_cpu_to_le32(1 << 0) +#define RXON_FLG_CCK_MSK __constant_cpu_to_le32(1 << 1) +/* auto detection enable */ +#define RXON_FLG_AUTO_DETECT_MSK __constant_cpu_to_le32(1 << 2) +/* TGg protection when tx */ +#define RXON_FLG_TGG_PROTECT_MSK __constant_cpu_to_le32(1 << 3) +/* cck short slot & preamble */ +#define RXON_FLG_SHORT_SLOT_MSK __constant_cpu_to_le32(1 << 4) +#define RXON_FLG_SHORT_PREAMBLE_MSK __constant_cpu_to_le32(1 << 5) +/* antenna selection */ +#define RXON_FLG_DIS_DIV_MSK __constant_cpu_to_le32(1 << 7) +#define RXON_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0x0f00) +#define RXON_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8) +#define RXON_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9) +/* radar detection enable */ +#define RXON_FLG_RADAR_DETECT_MSK __constant_cpu_to_le32(1 << 12) +#define RXON_FLG_TGJ_NARROW_BAND_MSK __constant_cpu_to_le32(1 << 13) +/* rx response to host with 8-byte TSF +* (according to ON_AIR deassertion) */ +#define RXON_FLG_TSF2HOST_MSK __constant_cpu_to_le32(1 << 15) + + +/* HT flags */ +#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22) +#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK __constant_cpu_to_le32(0x1 << 22) + +#define RXON_FLG_HT_OPERATING_MODE_POS (23) + +#define RXON_FLG_HT_PROT_MSK __constant_cpu_to_le32(0x1 << 23) +#define RXON_FLG_FAT_PROT_MSK __constant_cpu_to_le32(0x2 << 23) + +#define RXON_FLG_CHANNEL_MODE_POS (25) +#define RXON_FLG_CHANNEL_MODE_MSK __constant_cpu_to_le32(0x3 << 25) +#define RXON_FLG_CHANNEL_MODE_PURE_40_MSK __constant_cpu_to_le32(0x1 << 25) +#define RXON_FLG_CHANNEL_MODE_MIXED_MSK __constant_cpu_to_le32(0x2 << 25) +/* CTS to self (if spec allows) flag */ +#define RXON_FLG_SELF_CTS_EN __constant_cpu_to_le32(0x1<<30) + +/* rx_config filter flags */ +/* accept all data frames */ +#define RXON_FILTER_PROMISC_MSK __constant_cpu_to_le32(1 << 0) +/* pass control & management to host */ +#define RXON_FILTER_CTL2HOST_MSK __constant_cpu_to_le32(1 << 1) +/* accept multi-cast */ +#define RXON_FILTER_ACCEPT_GRP_MSK __constant_cpu_to_le32(1 << 2) +/* don't decrypt uni-cast frames */ +#define RXON_FILTER_DIS_DECRYPT_MSK __constant_cpu_to_le32(1 << 3) +/* don't decrypt multi-cast frames */ +#define RXON_FILTER_DIS_GRP_DECRYPT_MSK __constant_cpu_to_le32(1 << 4) +/* STA is associated */ +#define RXON_FILTER_ASSOC_MSK __constant_cpu_to_le32(1 << 5) +/* transfer to host non bssid beacons in associated state */ +#define RXON_FILTER_BCON_AWARE_MSK __constant_cpu_to_le32(1 << 6) + +/** + * REPLY_RXON = 0x10 (command, has simple generic response) + * + * RXON tunes the radio tuner to a service channel, and sets up a number + * of parameters that are used primarily for Rx, but also for Tx operations. + * + * NOTE: When tuning to a new channel, driver must set the + * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent + * info within the device, including the station tables, tx retry + * rate tables, and txpower tables. Driver must build a new station + * table and txpower table before transmitting anything on the RXON + * channel. + * + * NOTE: All RXONs wipe clean the internal txpower table. Driver must + * issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10), + * regardless of whether RXON_FILTER_ASSOC_MSK is set. + */ +struct iwl4965_rxon_cmd { + u8 node_addr[6]; + __le16 reserved1; + u8 bssid_addr[6]; + __le16 reserved2; + u8 wlap_bssid_addr[6]; + __le16 reserved3; + u8 dev_type; + u8 air_propagation; + __le16 rx_chain; + u8 ofdm_basic_rates; + u8 cck_basic_rates; + __le16 assoc_id; + __le32 flags; + __le32 filter_flags; + __le16 channel; + u8 ofdm_ht_single_stream_basic_rates; + u8 ofdm_ht_dual_stream_basic_rates; +} __attribute__ ((packed)); + +/* 5000 HW just extend this cmmand */ +struct iwl_rxon_cmd { + u8 node_addr[6]; + __le16 reserved1; + u8 bssid_addr[6]; + __le16 reserved2; + u8 wlap_bssid_addr[6]; + __le16 reserved3; + u8 dev_type; + u8 air_propagation; + __le16 rx_chain; + u8 ofdm_basic_rates; + u8 cck_basic_rates; + __le16 assoc_id; + __le32 flags; + __le32 filter_flags; + __le16 channel; + u8 ofdm_ht_single_stream_basic_rates; + u8 ofdm_ht_dual_stream_basic_rates; + u8 ofdm_ht_triple_stream_basic_rates; + u8 reserved5; + __le16 acquisition_data; + __le16 reserved6; +} __attribute__ ((packed)); + +struct iwl5000_rxon_assoc_cmd { + __le32 flags; + __le32 filter_flags; + u8 ofdm_basic_rates; + u8 cck_basic_rates; + __le16 reserved1; + u8 ofdm_ht_single_stream_basic_rates; + u8 ofdm_ht_dual_stream_basic_rates; + u8 ofdm_ht_triple_stream_basic_rates; + u8 reserved2; + __le16 rx_chain_select_flags; + __le16 acquisition_data; + __le32 reserved3; +} __attribute__ ((packed)); + +/* + * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response) + */ +struct iwl4965_rxon_assoc_cmd { + __le32 flags; + __le32 filter_flags; + u8 ofdm_basic_rates; + u8 cck_basic_rates; + u8 ofdm_ht_single_stream_basic_rates; + u8 ofdm_ht_dual_stream_basic_rates; + __le16 rx_chain_select_flags; + __le16 reserved; +} __attribute__ ((packed)); + + + + +/* + * REPLY_RXON_TIMING = 0x14 (command, has simple generic response) + */ +struct iwl4965_rxon_time_cmd { + union tsf timestamp; + __le16 beacon_interval; + __le16 atim_window; + __le32 beacon_init_val; + __le16 listen_interval; + __le16 reserved; +} __attribute__ ((packed)); + +/* + * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response) + */ +struct iwl4965_channel_switch_cmd { + u8 band; + u8 expect_beacon; + __le16 channel; + __le32 rxon_flags; + __le32 rxon_filter_flags; + __le32 switch_time; + struct iwl4965_tx_power_db tx_power; +} __attribute__ ((packed)); + +/* + * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command) + */ +struct iwl4965_csa_notification { + __le16 band; + __le16 channel; + __le32 status; /* 0 - OK, 1 - fail */ +} __attribute__ ((packed)); + +/****************************************************************************** + * (2) + * Quality-of-Service (QOS) Commands & Responses: + * + *****************************************************************************/ + +/** + * struct iwl_ac_qos -- QOS timing params for REPLY_QOS_PARAM + * One for each of 4 EDCA access categories in struct iwl_qosparam_cmd + * + * @cw_min: Contention window, start value in numbers of slots. + * Should be a power-of-2, minus 1. Device's default is 0x0f. + * @cw_max: Contention window, max value in numbers of slots. + * Should be a power-of-2, minus 1. Device's default is 0x3f. + * @aifsn: Number of slots in Arbitration Interframe Space (before + * performing random backoff timing prior to Tx). Device default 1. + * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. + * + * Device will automatically increase contention window by (2*CW) + 1 for each + * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW + * value, to cap the CW value. + */ +struct iwl_ac_qos { + __le16 cw_min; + __le16 cw_max; + u8 aifsn; + u8 reserved1; + __le16 edca_txop; +} __attribute__ ((packed)); + +/* QoS flags defines */ +#define QOS_PARAM_FLG_UPDATE_EDCA_MSK __constant_cpu_to_le32(0x01) +#define QOS_PARAM_FLG_TGN_MSK __constant_cpu_to_le32(0x02) +#define QOS_PARAM_FLG_TXOP_TYPE_MSK __constant_cpu_to_le32(0x10) + +/* Number of Access Categories (AC) (EDCA), queues 0..3 */ +#define AC_NUM 4 + +/* + * REPLY_QOS_PARAM = 0x13 (command, has simple generic response) + * + * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs + * 0: Background, 1: Best Effort, 2: Video, 3: Voice. + */ +struct iwl_qosparam_cmd { + __le32 qos_flags; + struct iwl_ac_qos ac[AC_NUM]; +} __attribute__ ((packed)); + +/****************************************************************************** + * (3) + * Add/Modify Stations Commands & Responses: + * + *****************************************************************************/ +/* + * Multi station support + */ + +/* Special, dedicated locations within device's station table */ +#define IWL_AP_ID 0 +#define IWL_MULTICAST_ID 1 +#define IWL_STA_ID 2 +#define IWL4965_BROADCAST_ID 31 +#define IWL4965_STATION_COUNT 32 +#define IWL5000_BROADCAST_ID 15 +#define IWL5000_STATION_COUNT 16 + +#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/ +#define IWL_INVALID_STATION 255 + +#define STA_FLG_PWR_SAVE_MSK __constant_cpu_to_le32(1 << 8); +#define STA_FLG_RTS_MIMO_PROT_MSK __constant_cpu_to_le32(1 << 17) +#define STA_FLG_AGG_MPDU_8US_MSK __constant_cpu_to_le32(1 << 18) +#define STA_FLG_MAX_AGG_SIZE_POS (19) +#define STA_FLG_MAX_AGG_SIZE_MSK __constant_cpu_to_le32(3 << 19) +#define STA_FLG_FAT_EN_MSK __constant_cpu_to_le32(1 << 21) +#define STA_FLG_MIMO_DIS_MSK __constant_cpu_to_le32(1 << 22) +#define STA_FLG_AGG_MPDU_DENSITY_POS (23) +#define STA_FLG_AGG_MPDU_DENSITY_MSK __constant_cpu_to_le32(7 << 23) + +/* Use in mode field. 1: modify existing entry, 0: add new station entry */ +#define STA_CONTROL_MODIFY_MSK 0x01 + +/* key flags __le16*/ +#define STA_KEY_FLG_ENCRYPT_MSK __constant_cpu_to_le16(0x0007) +#define STA_KEY_FLG_NO_ENC __constant_cpu_to_le16(0x0000) +#define STA_KEY_FLG_WEP __constant_cpu_to_le16(0x0001) +#define STA_KEY_FLG_CCMP __constant_cpu_to_le16(0x0002) +#define STA_KEY_FLG_TKIP __constant_cpu_to_le16(0x0003) + +#define STA_KEY_FLG_KEYID_POS 8 +#define STA_KEY_FLG_INVALID __constant_cpu_to_le16(0x0800) +/* wep key is either from global key (0) or from station info array (1) */ +#define STA_KEY_FLG_MAP_KEY_MSK __constant_cpu_to_le16(0x0008) + +/* wep key in STA: 5-bytes (0) or 13-bytes (1) */ +#define STA_KEY_FLG_KEY_SIZE_MSK __constant_cpu_to_le16(0x1000) +#define STA_KEY_MULTICAST_MSK __constant_cpu_to_le16(0x4000) +#define STA_KEY_MAX_NUM 8 + +/* Flags indicate whether to modify vs. don't change various station params */ +#define STA_MODIFY_KEY_MASK 0x01 +#define STA_MODIFY_TID_DISABLE_TX 0x02 +#define STA_MODIFY_TX_RATE_MSK 0x04 +#define STA_MODIFY_ADDBA_TID_MSK 0x08 +#define STA_MODIFY_DELBA_TID_MSK 0x10 + +/* Receiver address (actually, Rx station's index into station table), + * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */ +#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid)) + +struct iwl4965_keyinfo { + __le16 key_flags; + u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ + u8 reserved1; + __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */ + u8 key_offset; + u8 reserved2; + u8 key[16]; /* 16-byte unicast decryption key */ +} __attribute__ ((packed)); + +/* 5000 */ +struct iwl_keyinfo { + __le16 key_flags; + u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ + u8 reserved1; + __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */ + u8 key_offset; + u8 reserved2; + u8 key[16]; /* 16-byte unicast decryption key */ + __le64 tx_secur_seq_cnt; + __le64 hw_tkip_mic_rx_key; + __le64 hw_tkip_mic_tx_key; +} __attribute__ ((packed)); + +/** + * struct sta_id_modify + * @addr[ETH_ALEN]: station's MAC address + * @sta_id: index of station in uCode's station table + * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change + * + * Driver selects unused table index when adding new station, + * or the index to a pre-existing station entry when modifying that station. + * Some indexes have special purposes (IWL_AP_ID, index 0, is for AP). + * + * modify_mask flags select which parameters to modify vs. leave alone. + */ +struct sta_id_modify { + u8 addr[ETH_ALEN]; + __le16 reserved1; + u8 sta_id; + u8 modify_mask; + __le16 reserved2; +} __attribute__ ((packed)); + +/* + * REPLY_ADD_STA = 0x18 (command) + * + * The device contains an internal table of per-station information, + * with info on security keys, aggregation parameters, and Tx rates for + * initial Tx attempt and any retries (4965 uses REPLY_TX_LINK_QUALITY_CMD, + * 3945 uses REPLY_RATE_SCALE to set up rate tables). + * + * REPLY_ADD_STA sets up the table entry for one station, either creating + * a new entry, or modifying a pre-existing one. + * + * NOTE: RXON command (without "associated" bit set) wipes the station table + * clean. Moving into RF_KILL state does this also. Driver must set up + * new station table before transmitting anything on the RXON channel + * (except active scans or active measurements; those commands carry + * their own txpower/rate setup data). + * + * When getting started on a new channel, driver must set up the + * IWL_BROADCAST_ID entry (last entry in the table). For a client + * station in a BSS, once an AP is selected, driver sets up the AP STA + * in the IWL_AP_ID entry (1st entry in the table). BROADCAST and AP + * are all that are needed for a BSS client station. If the device is + * used as AP, or in an IBSS network, driver must set up station table + * entries for all STAs in network, starting with index IWL_STA_ID. + */ +struct iwl4965_addsta_cmd { + u8 mode; /* 1: modify existing, 0: add new station */ + u8 reserved[3]; + struct sta_id_modify sta; + struct iwl4965_keyinfo key; + __le32 station_flags; /* STA_FLG_* */ + __le32 station_flags_msk; /* STA_FLG_* */ + + /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) + * corresponding to bit (e.g. bit 5 controls TID 5). + * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ + __le16 tid_disable_tx; + + __le16 reserved1; + + /* TID for which to add block-ack support. + * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ + u8 add_immediate_ba_tid; + + /* TID for which to remove block-ack support. + * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ + u8 remove_immediate_ba_tid; + + /* Starting Sequence Number for added block-ack support. + * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ + __le16 add_immediate_ba_ssn; + + __le32 reserved2; +} __attribute__ ((packed)); + +/* 5000 */ +struct iwl_addsta_cmd { + u8 mode; /* 1: modify existing, 0: add new station */ + u8 reserved[3]; + struct sta_id_modify sta; + struct iwl_keyinfo key; + __le32 station_flags; /* STA_FLG_* */ + __le32 station_flags_msk; /* STA_FLG_* */ + + /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) + * corresponding to bit (e.g. bit 5 controls TID 5). + * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ + __le16 tid_disable_tx; + + __le16 reserved1; + + /* TID for which to add block-ack support. + * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ + u8 add_immediate_ba_tid; + + /* TID for which to remove block-ack support. + * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ + u8 remove_immediate_ba_tid; + + /* Starting Sequence Number for added block-ack support. + * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ + __le16 add_immediate_ba_ssn; + + __le32 reserved2; +} __attribute__ ((packed)); + + +#define ADD_STA_SUCCESS_MSK 0x1 +#define ADD_STA_NO_ROOM_IN_TABLE 0x2 +#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4 +#define ADD_STA_MODIFY_NON_EXIST_STA 0x8 +/* + * REPLY_ADD_STA = 0x18 (response) + */ +struct iwl_add_sta_resp { + u8 status; /* ADD_STA_* */ +} __attribute__ ((packed)); + +#define REM_STA_SUCCESS_MSK 0x1 +/* + * REPLY_REM_STA = 0x19 (response) + */ +struct iwl_rem_sta_resp { + u8 status; +} __attribute__ ((packed)); + +/* + * REPLY_REM_STA = 0x19 (command) + */ +struct iwl_rem_sta_cmd { + u8 num_sta; /* number of removed stations */ + u8 reserved[3]; + u8 addr[ETH_ALEN]; /* MAC addr of the first station */ + u8 reserved2[2]; +} __attribute__ ((packed)); + +/* + * REPLY_WEP_KEY = 0x20 + */ +struct iwl_wep_key { + u8 key_index; + u8 key_offset; + u8 reserved1[2]; + u8 key_size; + u8 reserved2[3]; + u8 key[16]; +} __attribute__ ((packed)); + +struct iwl_wep_cmd { + u8 num_keys; + u8 global_key_type; + u8 flags; + u8 reserved; + struct iwl_wep_key key[0]; +} __attribute__ ((packed)); + +#define WEP_KEY_WEP_TYPE 1 +#define WEP_KEYS_MAX 4 +#define WEP_INVALID_OFFSET 0xff +#define WEP_KEY_LEN_64 5 +#define WEP_KEY_LEN_128 13 + +/****************************************************************************** + * (4) + * Rx Responses: + * + *****************************************************************************/ + +struct iwl4965_rx_frame_stats { + u8 phy_count; + u8 id; + u8 rssi; + u8 agc; + __le16 sig_avg; + __le16 noise_diff; + u8 payload[0]; +} __attribute__ ((packed)); + +struct iwl4965_rx_frame_hdr { + __le16 channel; + __le16 phy_flags; + u8 reserved1; + u8 rate; + __le16 len; + u8 payload[0]; +} __attribute__ ((packed)); + +#define RX_RES_STATUS_NO_CRC32_ERROR __constant_cpu_to_le32(1 << 0) +#define RX_RES_STATUS_NO_RXE_OVERFLOW __constant_cpu_to_le32(1 << 1) + +#define RX_RES_PHY_FLAGS_BAND_24_MSK __constant_cpu_to_le16(1 << 0) +#define RX_RES_PHY_FLAGS_MOD_CCK_MSK __constant_cpu_to_le16(1 << 1) +#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK __constant_cpu_to_le16(1 << 2) +#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK __constant_cpu_to_le16(1 << 3) +#define RX_RES_PHY_FLAGS_ANTENNA_MSK __constant_cpu_to_le16(0xf0) + +#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) +#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8) +#define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8) +#define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8) +#define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8) +#define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8) + +#define RX_RES_STATUS_STATION_FOUND (1<<6) +#define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7) + +#define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11) +#define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11) +#define RX_RES_STATUS_DECRYPT_OK (0x3 << 11) +#define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11) +#define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11) + +#define RX_MPDU_RES_STATUS_ICV_OK (0x20) +#define RX_MPDU_RES_STATUS_MIC_OK (0x40) +#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7) +#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800) + +struct iwl4965_rx_frame_end { + __le32 status; + __le64 timestamp; + __le32 beacon_timestamp; +} __attribute__ ((packed)); + +/* + * REPLY_3945_RX = 0x1b (response only, not a command) + * + * NOTE: DO NOT dereference from casts to this structure + * It is provided only for calculating minimum data set size. + * The actual offsets of the hdr and end are dynamic based on + * stats.phy_count + */ +struct iwl4965_rx_frame { + struct iwl4965_rx_frame_stats stats; + struct iwl4965_rx_frame_hdr hdr; + struct iwl4965_rx_frame_end end; +} __attribute__ ((packed)); + +/* Fixed (non-configurable) rx data from phy */ + +#define IWL49_RX_RES_PHY_CNT 14 +#define IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4) +#define IWL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70) +#define IWL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ +#define IWL49_AGC_DB_POS (7) +struct iwl4965_rx_non_cfg_phy { + __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */ + __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */ + u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */ + u8 pad[0]; +} __attribute__ ((packed)); + + +#define IWL50_RX_RES_PHY_CNT 8 +#define IWL50_RX_RES_AGC_IDX 1 +#define IWL50_RX_RES_RSSI_AB_IDX 2 +#define IWL50_RX_RES_RSSI_C_IDX 3 +#define IWL50_OFDM_AGC_MSK 0xfe00 +#define IWL50_OFDM_AGC_BIT_POS 9 +#define IWL50_OFDM_RSSI_A_MSK 0x00ff +#define IWL50_OFDM_RSSI_A_BIT_POS 0 +#define IWL50_OFDM_RSSI_B_MSK 0xff0000 +#define IWL50_OFDM_RSSI_B_BIT_POS 16 +#define IWL50_OFDM_RSSI_C_MSK 0x00ff +#define IWL50_OFDM_RSSI_C_BIT_POS 0 + +struct iwl5000_non_cfg_phy { + __le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* upto 8 phy entries */ +} __attribute__ ((packed)); + + +/* + * REPLY_RX = 0xc3 (response only, not a command) + * Used only for legacy (non 11n) frames. + */ +struct iwl_rx_phy_res { + u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */ + u8 cfg_phy_cnt; /* configurable DSP phy data byte count */ + u8 stat_id; /* configurable DSP phy data set ID */ + u8 reserved1; + __le64 timestamp; /* TSF at on air rise */ + __le32 beacon_time_stamp; /* beacon at on-air rise */ + __le16 phy_flags; /* general phy flags: band, modulation, ... */ + __le16 channel; /* channel number */ + u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */ + __le32 rate_n_flags; /* RATE_MCS_* */ + __le16 byte_count; /* frame's byte-count */ + __le16 reserved3; +} __attribute__ ((packed)); + +struct iwl4965_rx_mpdu_res_start { + __le16 byte_count; + __le16 reserved; +} __attribute__ ((packed)); + + +/****************************************************************************** + * (5) + * Tx Commands & Responses: + * + * Driver must place each REPLY_TX command into one of the prioritized Tx + * queues in host DRAM, shared between driver and device (see comments for + * SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode + * are preparing to transmit, the device pulls the Tx command over the PCI + * bus via one of the device's Tx DMA channels, to fill an internal FIFO + * from which data will be transmitted. + * + * uCode handles all timing and protocol related to control frames + * (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler + * handle reception of block-acks; uCode updates the host driver via + * REPLY_COMPRESSED_BA (4965). + * + * uCode handles retrying Tx when an ACK is expected but not received. + * This includes trying lower data rates than the one requested in the Tx + * command, as set up by the REPLY_RATE_SCALE (for 3945) or + * REPLY_TX_LINK_QUALITY_CMD (4965). + * + * Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD. + * This command must be executed after every RXON command, before Tx can occur. + *****************************************************************************/ + +/* REPLY_TX Tx flags field */ + +/* 1: Use RTS/CTS protocol or CTS-to-self if spec alows it + * before this frame. if CTS-to-self required check + * RXON_FLG_SELF_CTS_EN status. */ +#define TX_CMD_FLG_RTS_CTS_MSK __constant_cpu_to_le32(1 << 0) + +/* 1: Use Request-To-Send protocol before this frame. + * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */ +#define TX_CMD_FLG_RTS_MSK __constant_cpu_to_le32(1 << 1) + +/* 1: Transmit Clear-To-Send to self before this frame. + * Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames. + * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */ +#define TX_CMD_FLG_CTS_MSK __constant_cpu_to_le32(1 << 2) + +/* 1: Expect ACK from receiving station + * 0: Don't expect ACK (MAC header's duration field s/b 0) + * Set this for unicast frames, but not broadcast/multicast. */ +#define TX_CMD_FLG_ACK_MSK __constant_cpu_to_le32(1 << 3) + +/* For 4965: + * 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD). + * Tx command's initial_rate_index indicates first rate to try; + * uCode walks through table for additional Tx attempts. + * 0: Use Tx rate/MCS from Tx command's rate_n_flags field. + * This rate will be used for all Tx attempts; it will not be scaled. */ +#define TX_CMD_FLG_STA_RATE_MSK __constant_cpu_to_le32(1 << 4) + +/* 1: Expect immediate block-ack. + * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */ +#define TX_CMD_FLG_IMM_BA_RSP_MASK __constant_cpu_to_le32(1 << 6) + +/* 1: Frame requires full Tx-Op protection. + * Set this if either RTS or CTS Tx Flag gets set. */ +#define TX_CMD_FLG_FULL_TXOP_PROT_MSK __constant_cpu_to_le32(1 << 7) + +/* Tx antenna selection field; used only for 3945, reserved (0) for 4965. + * Set field to "0" to allow 3945 uCode to select antenna (normal usage). */ +#define TX_CMD_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0xf00) +#define TX_CMD_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8) +#define TX_CMD_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9) + +/* 1: Ignore Bluetooth priority for this frame. + * 0: Delay Tx until Bluetooth device is done (normal usage). */ +#define TX_CMD_FLG_BT_DIS_MSK __constant_cpu_to_le32(1 << 12) + +/* 1: uCode overrides sequence control field in MAC header. + * 0: Driver provides sequence control field in MAC header. + * Set this for management frames, non-QOS data frames, non-unicast frames, + * and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */ +#define TX_CMD_FLG_SEQ_CTL_MSK __constant_cpu_to_le32(1 << 13) + +/* 1: This frame is non-last MPDU; more fragments are coming. + * 0: Last fragment, or not using fragmentation. */ +#define TX_CMD_FLG_MORE_FRAG_MSK __constant_cpu_to_le32(1 << 14) + +/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame. + * 0: No TSF required in outgoing frame. + * Set this for transmitting beacons and probe responses. */ +#define TX_CMD_FLG_TSF_MSK __constant_cpu_to_le32(1 << 16) + +/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword + * alignment of frame's payload data field. + * 0: No pad + * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4 + * field (but not both). Driver must align frame data (i.e. data following + * MAC header) to DWORD boundary. */ +#define TX_CMD_FLG_MH_PAD_MSK __constant_cpu_to_le32(1 << 20) + +/* accelerate aggregation support + * 0 - no CCMP encryption; 1 - CCMP encryption */ +#define TX_CMD_FLG_AGG_CCMP_MSK __constant_cpu_to_le32(1 << 22) + +/* HCCA-AP - disable duration overwriting. */ +#define TX_CMD_FLG_DUR_MSK __constant_cpu_to_le32(1 << 25) + + +/* + * TX command security control + */ +#define TX_CMD_SEC_WEP 0x01 +#define TX_CMD_SEC_CCM 0x02 +#define TX_CMD_SEC_TKIP 0x03 +#define TX_CMD_SEC_MSK 0x03 +#define TX_CMD_SEC_SHIFT 6 +#define TX_CMD_SEC_KEY128 0x08 + +/* + * security overhead sizes + */ +#define WEP_IV_LEN 4 +#define WEP_ICV_LEN 4 +#define CCMP_MIC_LEN 8 +#define TKIP_ICV_LEN 4 + +/* + * 4965 uCode updates these Tx attempt count values in host DRAM. + * Used for managing Tx retries when expecting block-acks. + * Driver should set these fields to 0. + */ +struct iwl4965_dram_scratch { + u8 try_cnt; /* Tx attempts */ + u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */ + __le16 reserved; +} __attribute__ ((packed)); + +/* + * REPLY_TX = 0x1c (command) + */ +struct iwl_tx_cmd { + /* + * MPDU byte count: + * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, + * + 8 byte IV for CCM or TKIP (not used for WEP) + * + Data payload + * + 8-byte MIC (not used for CCM/WEP) + * NOTE: Does not include Tx command bytes, post-MAC pad bytes, + * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i + * Range: 14-2342 bytes. + */ + __le16 len; + + /* + * MPDU or MSDU byte count for next frame. + * Used for fragmentation and bursting, but not 11n aggregation. + * Same as "len", but for next frame. Set to 0 if not applicable. + */ + __le16 next_frame_len; + + __le32 tx_flags; /* TX_CMD_FLG_* */ + + /* 4965's uCode may modify this field of the Tx command (in host DRAM!). + * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */ + struct iwl4965_dram_scratch scratch; + + /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */ + __le32 rate_n_flags; /* RATE_MCS_* */ + + /* Index of destination station in uCode's station table */ + u8 sta_id; + + /* Type of security encryption: CCM or TKIP */ + u8 sec_ctl; /* TX_CMD_SEC_* */ + + /* + * Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial + * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for + * data frames, this field may be used to selectively reduce initial + * rate (via non-0 value) for special frames (e.g. management), while + * still supporting rate scaling for all frames. + */ + u8 initial_rate_index; + u8 reserved; + u8 key[16]; + __le16 next_frame_flags; + __le16 reserved2; + union { + __le32 life_time; + __le32 attempt; + } stop_time; + + /* Host DRAM physical address pointer to "scratch" in this command. + * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */ + __le32 dram_lsb_ptr; + u8 dram_msb_ptr; + + u8 rts_retry_limit; /*byte 50 */ + u8 data_retry_limit; /*byte 51 */ + u8 tid_tspec; + union { + __le16 pm_frame_timeout; + __le16 attempt_duration; + } timeout; + + /* + * Duration of EDCA burst Tx Opportunity, in 32-usec units. + * Set this if txop time is not specified by HCCA protocol (e.g. by AP). + */ + __le16 driver_txop; + + /* + * MAC header goes here, followed by 2 bytes padding if MAC header + * length is 26 or 30 bytes, followed by payload data + */ + u8 payload[0]; + struct ieee80211_hdr hdr[0]; +} __attribute__ ((packed)); + +/* TX command response is sent after *all* transmission attempts. + * + * NOTES: + * + * TX_STATUS_FAIL_NEXT_FRAG + * + * If the fragment flag in the MAC header for the frame being transmitted + * is set and there is insufficient time to transmit the next frame, the + * TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'. + * + * TX_STATUS_FIFO_UNDERRUN + * + * Indicates the host did not provide bytes to the FIFO fast enough while + * a TX was in progress. + * + * TX_STATUS_FAIL_MGMNT_ABORT + * + * This status is only possible if the ABORT ON MGMT RX parameter was + * set to true with the TX command. + * + * If the MSB of the status parameter is set then an abort sequence is + * required. This sequence consists of the host activating the TX Abort + * control line, and then waiting for the TX Abort command response. This + * indicates that a the device is no longer in a transmit state, and that the + * command FIFO has been cleared. The host must then deactivate the TX Abort + * control line. Receiving is still allowed in this case. + */ +enum { + TX_STATUS_SUCCESS = 0x01, + TX_STATUS_DIRECT_DONE = 0x02, + TX_STATUS_FAIL_SHORT_LIMIT = 0x82, + TX_STATUS_FAIL_LONG_LIMIT = 0x83, + TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84, + TX_STATUS_FAIL_MGMNT_ABORT = 0x85, + TX_STATUS_FAIL_NEXT_FRAG = 0x86, + TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, + TX_STATUS_FAIL_DEST_PS = 0x88, + TX_STATUS_FAIL_ABORTED = 0x89, + TX_STATUS_FAIL_BT_RETRY = 0x8a, + TX_STATUS_FAIL_STA_INVALID = 0x8b, + TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, + TX_STATUS_FAIL_TID_DISABLE = 0x8d, + TX_STATUS_FAIL_FRAME_FLUSHED = 0x8e, + TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, + TX_STATUS_FAIL_TX_LOCKED = 0x90, + TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, +}; + +#define TX_PACKET_MODE_REGULAR 0x0000 +#define TX_PACKET_MODE_BURST_SEQ 0x0100 +#define TX_PACKET_MODE_BURST_FIRST 0x0200 + +enum { + TX_POWER_PA_NOT_ACTIVE = 0x0, +}; + +enum { + TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */ + TX_STATUS_DELAY_MSK = 0x00000040, + TX_STATUS_ABORT_MSK = 0x00000080, + TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */ + TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */ + TX_RESERVED = 0x00780000, /* bits 19:22 */ + TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */ + TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */ +}; + +static inline int iwl_is_tx_success(u32 status) +{ + status &= TX_STATUS_MSK; + return (status == TX_STATUS_SUCCESS) + || (status == TX_STATUS_DIRECT_DONE); +} + + + +/* ******************************* + * TX aggregation status + ******************************* */ + +enum { + AGG_TX_STATE_TRANSMITTED = 0x00, + AGG_TX_STATE_UNDERRUN_MSK = 0x01, + AGG_TX_STATE_BT_PRIO_MSK = 0x02, + AGG_TX_STATE_FEW_BYTES_MSK = 0x04, + AGG_TX_STATE_ABORT_MSK = 0x08, + AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10, + AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20, + AGG_TX_STATE_LAST_SENT_BT_KILL_MSK = 0x40, + AGG_TX_STATE_SCD_QUERY_MSK = 0x80, + AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100, + AGG_TX_STATE_RESPONSE_MSK = 0x1ff, + AGG_TX_STATE_DUMP_TX_MSK = 0x200, + AGG_TX_STATE_DELAY_TX_MSK = 0x400 +}; + +#define AGG_TX_STATE_LAST_SENT_MSK \ +(AGG_TX_STATE_LAST_SENT_TTL_MSK | \ + AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \ + AGG_TX_STATE_LAST_SENT_BT_KILL_MSK) + +/* # tx attempts for first frame in aggregation */ +#define AGG_TX_STATE_TRY_CNT_POS 12 +#define AGG_TX_STATE_TRY_CNT_MSK 0xf000 + +/* Command ID and sequence number of Tx command for this frame */ +#define AGG_TX_STATE_SEQ_NUM_POS 16 +#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000 + +/* + * REPLY_TX = 0x1c (response) + * + * This response may be in one of two slightly different formats, indicated + * by the frame_count field: + * + * 1) No aggregation (frame_count == 1). This reports Tx results for + * a single frame. Multiple attempts, at various bit rates, may have + * been made for this frame. + * + * 2) Aggregation (frame_count > 1). This reports Tx results for + * 2 or more frames that used block-acknowledge. All frames were + * transmitted at same rate. Rate scaling may have been used if first + * frame in this new agg block failed in previous agg block(s). + * + * Note that, for aggregation, ACK (block-ack) status is not delivered here; + * block-ack has not been received by the time the 4965 records this status. + * This status relates to reasons the tx might have been blocked or aborted + * within the sending station (this 4965), rather than whether it was + * received successfully by the destination station. + */ +struct agg_tx_status { + __le16 status; + __le16 sequence; +} __attribute__ ((packed)); + +struct iwl4965_tx_resp { + u8 frame_count; /* 1 no aggregation, >1 aggregation */ + u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */ + u8 failure_rts; /* # failures due to unsuccessful RTS */ + u8 failure_frame; /* # failures due to no ACK (unused for agg) */ + + /* For non-agg: Rate at which frame was successful. + * For agg: Rate at which all frames were transmitted. */ + __le32 rate_n_flags; /* RATE_MCS_* */ + + /* For non-agg: RTS + CTS + frame tx attempts time + ACK. + * For agg: RTS + CTS + aggregation tx time + block-ack time. */ + __le16 wireless_media_time; /* uSecs */ + + __le16 reserved; + __le32 pa_power1; /* RF power amplifier measurement (not used) */ + __le32 pa_power2; + + /* + * For non-agg: frame status TX_STATUS_* + * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status + * fields follow this one, up to frame_count. + * Bit fields: + * 11- 0: AGG_TX_STATE_* status code + * 15-12: Retry count for 1st frame in aggregation (retries + * occur if tx failed for this frame when it was a + * member of a previous aggregation block). If rate + * scaling is used, retry count indicates the rate + * table entry used for all frames in the new agg. + * 31-16: Sequence # for this frame's Tx cmd (not SSN!) + */ + union { + __le32 status; + struct agg_tx_status agg_status[0]; /* for each agg frame */ + } u; +} __attribute__ ((packed)); + +struct iwl5000_tx_resp { + u8 frame_count; /* 1 no aggregation, >1 aggregation */ + u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */ + u8 failure_rts; /* # failures due to unsuccessful RTS */ + u8 failure_frame; /* # failures due to no ACK (unused for agg) */ + + /* For non-agg: Rate at which frame was successful. + * For agg: Rate at which all frames were transmitted. */ + __le32 rate_n_flags; /* RATE_MCS_* */ + + /* For non-agg: RTS + CTS + frame tx attempts time + ACK. + * For agg: RTS + CTS + aggregation tx time + block-ack time. */ + __le16 wireless_media_time; /* uSecs */ + + __le16 reserved; + __le32 pa_power1; /* RF power amplifier measurement (not used) */ + __le32 pa_power2; + + __le32 tfd_info; + __le16 seq_ctl; + __le16 byte_cnt; + __le32 tlc_info; + /* + * For non-agg: frame status TX_STATUS_* + * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status + * fields follow this one, up to frame_count. + * Bit fields: + * 11- 0: AGG_TX_STATE_* status code + * 15-12: Retry count for 1st frame in aggregation (retries + * occur if tx failed for this frame when it was a + * member of a previous aggregation block). If rate + * scaling is used, retry count indicates the rate + * table entry used for all frames in the new agg. + * 31-16: Sequence # for this frame's Tx cmd (not SSN!) + */ + struct agg_tx_status status; /* TX status (in aggregation - + * status of 1st frame) */ +} __attribute__ ((packed)); +/* + * REPLY_COMPRESSED_BA = 0xc5 (response only, not a command) + * + * Reports Block-Acknowledge from recipient station + */ +struct iwl_compressed_ba_resp { + __le32 sta_addr_lo32; + __le16 sta_addr_hi16; + __le16 reserved; + + /* Index of recipient (BA-sending) station in uCode's station table */ + u8 sta_id; + u8 tid; + __le16 seq_ctl; + __le64 bitmap; + __le16 scd_flow; + __le16 scd_ssn; +} __attribute__ ((packed)); + +/* + * REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response) + * + * See details under "TXPOWER" in iwl-4965-hw.h. + */ +struct iwl4965_txpowertable_cmd { + u8 band; /* 0: 5 GHz, 1: 2.4 GHz */ + u8 reserved; + __le16 channel; + struct iwl4965_tx_power_db tx_power; +} __attribute__ ((packed)); + +/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */ +#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0) + +/* # of EDCA prioritized tx fifos */ +#define LINK_QUAL_AC_NUM AC_NUM + +/* # entries in rate scale table to support Tx retries */ +#define LINK_QUAL_MAX_RETRY_NUM 16 + +/* Tx antenna selection values */ +#define LINK_QUAL_ANT_A_MSK (1 << 0) +#define LINK_QUAL_ANT_B_MSK (1 << 1) +#define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK) + + +/** + * struct iwl_link_qual_general_params + * + * Used in REPLY_TX_LINK_QUALITY_CMD + */ +struct iwl_link_qual_general_params { + u8 flags; + + /* No entries at or above this (driver chosen) index contain MIMO */ + u8 mimo_delimiter; + + /* Best single antenna to use for single stream (legacy, SISO). */ + u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */ + + /* Best antennas to use for MIMO (unused for 4965, assumes both). */ + u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */ + + /* + * If driver needs to use different initial rates for different + * EDCA QOS access categories (as implemented by tx fifos 0-3), + * this table will set that up, by indicating the indexes in the + * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start. + * Otherwise, driver should set all entries to 0. + * + * Entry usage: + * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice + * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3. + */ + u8 start_rate_index[LINK_QUAL_AC_NUM]; +} __attribute__ ((packed)); + +/** + * struct iwl_link_qual_agg_params + * + * Used in REPLY_TX_LINK_QUALITY_CMD + */ +struct iwl_link_qual_agg_params { + + /* Maximum number of uSec in aggregation. + * Driver should set this to 4000 (4 milliseconds). */ + __le16 agg_time_limit; + + /* + * Number of Tx retries allowed for a frame, before that frame will + * no longer be considered for the start of an aggregation sequence + * (scheduler will then try to tx it as single frame). + * Driver should set this to 3. + */ + u8 agg_dis_start_th; + + /* + * Maximum number of frames in aggregation. + * 0 = no limit (default). 1 = no aggregation. + * Other values = max # frames in aggregation. + */ + u8 agg_frame_cnt_limit; + + __le32 reserved; +} __attribute__ ((packed)); + +/* + * REPLY_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response) + * + * For 4965 only; 3945 uses REPLY_RATE_SCALE. + * + * Each station in the 4965's internal station table has its own table of 16 + * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when + * an ACK is not received. This command replaces the entire table for + * one station. + * + * NOTE: Station must already be in 4965's station table. Use REPLY_ADD_STA. + * + * The rate scaling procedures described below work well. Of course, other + * procedures are possible, and may work better for particular environments. + * + * + * FILLING THE RATE TABLE + * + * Given a particular initial rate and mode, as determined by the rate + * scaling algorithm described below, the Linux driver uses the following + * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the + * Link Quality command: + * + * + * 1) If using High-throughput (HT) (SISO or MIMO) initial rate: + * a) Use this same initial rate for first 3 entries. + * b) Find next lower available rate using same mode (SISO or MIMO), + * use for next 3 entries. If no lower rate available, switch to + * legacy mode (no FAT channel, no MIMO, no short guard interval). + * c) If using MIMO, set command's mimo_delimiter to number of entries + * using MIMO (3 or 6). + * d) After trying 2 HT rates, switch to legacy mode (no FAT channel, + * no MIMO, no short guard interval), at the next lower bit rate + * (e.g. if second HT bit rate was 54, try 48 legacy), and follow + * legacy procedure for remaining table entries. + * + * 2) If using legacy initial rate: + * a) Use the initial rate for only one entry. + * b) For each following entry, reduce the rate to next lower available + * rate, until reaching the lowest available rate. + * c) When reducing rate, also switch antenna selection. + * d) Once lowest available rate is reached, repeat this rate until + * rate table is filled (16 entries), switching antenna each entry. + * + * + * ACCUMULATING HISTORY + * + * The rate scaling algorithm for 4965, as implemented in Linux driver, uses + * two sets of frame Tx success history: One for the current/active modulation + * mode, and one for a speculative/search mode that is being attempted. If the + * speculative mode turns out to be more effective (i.e. actual transfer + * rate is better), then the driver continues to use the speculative mode + * as the new current active mode. + * + * Each history set contains, separately for each possible rate, data for a + * sliding window of the 62 most recent tx attempts at that rate. The data + * includes a shifting bitmap of success(1)/failure(0), and sums of successful + * and attempted frames, from which the driver can additionally calculate a + * success ratio (success / attempted) and number of failures + * (attempted - success), and control the size of the window (attempted). + * The driver uses the bit map to remove successes from the success sum, as + * the oldest tx attempts fall out of the window. + * + * When the 4965 makes multiple tx attempts for a given frame, each attempt + * might be at a different rate, and have different modulation characteristics + * (e.g. antenna, fat channel, short guard interval), as set up in the rate + * scaling table in the Link Quality command. The driver must determine + * which rate table entry was used for each tx attempt, to determine which + * rate-specific history to update, and record only those attempts that + * match the modulation characteristics of the history set. + * + * When using block-ack (aggregation), all frames are transmitted at the same + * rate, since there is no per-attempt acknowledgement from the destination + * station. The Tx response struct iwl_tx_resp indicates the Tx rate in + * rate_n_flags field. After receiving a block-ack, the driver can update + * history for the entire block all at once. + * + * + * FINDING BEST STARTING RATE: + * + * When working with a selected initial modulation mode (see below), the + * driver attempts to find a best initial rate. The initial rate is the + * first entry in the Link Quality command's rate table. + * + * 1) Calculate actual throughput (success ratio * expected throughput, see + * table below) for current initial rate. Do this only if enough frames + * have been attempted to make the value meaningful: at least 6 failed + * tx attempts, or at least 8 successes. If not enough, don't try rate + * scaling yet. + * + * 2) Find available rates adjacent to current initial rate. Available means: + * a) supported by hardware && + * b) supported by association && + * c) within any constraints selected by user + * + * 3) Gather measured throughputs for adjacent rates. These might not have + * enough history to calculate a throughput. That's okay, we might try + * using one of them anyway! + * + * 4) Try decreasing rate if, for current rate: + * a) success ratio is < 15% || + * b) lower adjacent rate has better measured throughput || + * c) higher adjacent rate has worse throughput, and lower is unmeasured + * + * As a sanity check, if decrease was determined above, leave rate + * unchanged if: + * a) lower rate unavailable + * b) success ratio at current rate > 85% (very good) + * c) current measured throughput is better than expected throughput + * of lower rate (under perfect 100% tx conditions, see table below) + * + * 5) Try increasing rate if, for current rate: + * a) success ratio is < 15% || + * b) both adjacent rates' throughputs are unmeasured (try it!) || + * b) higher adjacent rate has better measured throughput || + * c) lower adjacent rate has worse throughput, and higher is unmeasured + * + * As a sanity check, if increase was determined above, leave rate + * unchanged if: + * a) success ratio at current rate < 70%. This is not particularly + * good performance; higher rate is sure to have poorer success. + * + * 6) Re-evaluate the rate after each tx frame. If working with block- + * acknowledge, history and statistics may be calculated for the entire + * block (including prior history that fits within the history windows), + * before re-evaluation. + * + * FINDING BEST STARTING MODULATION MODE: + * + * After working with a modulation mode for a "while" (and doing rate scaling), + * the driver searches for a new initial mode in an attempt to improve + * throughput. The "while" is measured by numbers of attempted frames: + * + * For legacy mode, search for new mode after: + * 480 successful frames, or 160 failed frames + * For high-throughput modes (SISO or MIMO), search for new mode after: + * 4500 successful frames, or 400 failed frames + * + * Mode switch possibilities are (3 for each mode): + * + * For legacy: + * Change antenna, try SISO (if HT association), try MIMO (if HT association) + * For SISO: + * Change antenna, try MIMO, try shortened guard interval (SGI) + * For MIMO: + * Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI) + * + * When trying a new mode, use the same bit rate as the old/current mode when + * trying antenna switches and shortened guard interval. When switching to + * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate + * for which the expected throughput (under perfect conditions) is about the + * same or slightly better than the actual measured throughput delivered by + * the old/current mode. + * + * Actual throughput can be estimated by multiplying the expected throughput + * by the success ratio (successful / attempted tx frames). Frame size is + * not considered in this calculation; it assumes that frame size will average + * out to be fairly consistent over several samples. The following are + * metric values for expected throughput assuming 100% success ratio. + * Only G band has support for CCK rates: + * + * RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60 + * + * G: 7 13 35 58 40 57 72 98 121 154 177 186 186 + * A: 0 0 0 0 40 57 72 98 121 154 177 186 186 + * SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202 + * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211 + * MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251 + * SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257 + * SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257 + * SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264 + * MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289 + * SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293 + * + * After the new mode has been tried for a short while (minimum of 6 failed + * frames or 8 successful frames), compare success ratio and actual throughput + * estimate of the new mode with the old. If either is better with the new + * mode, continue to use the new mode. + * + * Continue comparing modes until all 3 possibilities have been tried. + * If moving from legacy to HT, try all 3 possibilities from the new HT + * mode. After trying all 3, a best mode is found. Continue to use this mode + * for the longer "while" described above (e.g. 480 successful frames for + * legacy), and then repeat the search process. + * + */ +struct iwl_link_quality_cmd { + + /* Index of destination/recipient station in uCode's station table */ + u8 sta_id; + u8 reserved1; + __le16 control; /* not used */ + struct iwl_link_qual_general_params general_params; + struct iwl_link_qual_agg_params agg_params; + + /* + * Rate info; when using rate-scaling, Tx command's initial_rate_index + * specifies 1st Tx rate attempted, via index into this table. + * 4965 works its way through table when retrying Tx. + */ + struct { + __le32 rate_n_flags; /* RATE_MCS_*, IWL_RATE_* */ + } rs_table[LINK_QUAL_MAX_RETRY_NUM]; + __le32 reserved2; +} __attribute__ ((packed)); + +/* + * REPLY_BT_CONFIG = 0x9b (command, has simple generic response) + * + * 3945 and 4965 support hardware handshake with Bluetooth device on + * same platform. Bluetooth device alerts wireless device when it will Tx; + * wireless device can delay or kill its own Tx to accomodate. + */ +struct iwl4965_bt_cmd { + u8 flags; + u8 lead_time; + u8 max_kill; + u8 reserved; + __le32 kill_ack_mask; + __le32 kill_cts_mask; +} __attribute__ ((packed)); + +/****************************************************************************** + * (6) + * Spectrum Management (802.11h) Commands, Responses, Notifications: + * + *****************************************************************************/ + +/* + * Spectrum Management + */ +#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \ + RXON_FILTER_CTL2HOST_MSK | \ + RXON_FILTER_ACCEPT_GRP_MSK | \ + RXON_FILTER_DIS_DECRYPT_MSK | \ + RXON_FILTER_DIS_GRP_DECRYPT_MSK | \ + RXON_FILTER_ASSOC_MSK | \ + RXON_FILTER_BCON_AWARE_MSK) + +struct iwl4965_measure_channel { + __le32 duration; /* measurement duration in extended beacon + * format */ + u8 channel; /* channel to measure */ + u8 type; /* see enum iwl4965_measure_type */ + __le16 reserved; +} __attribute__ ((packed)); + +/* + * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command) + */ +struct iwl4965_spectrum_cmd { + __le16 len; /* number of bytes starting from token */ + u8 token; /* token id */ + u8 id; /* measurement id -- 0 or 1 */ + u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */ + u8 periodic; /* 1 = periodic */ + __le16 path_loss_timeout; + __le32 start_time; /* start time in extended beacon format */ + __le32 reserved2; + __le32 flags; /* rxon flags */ + __le32 filter_flags; /* rxon filter flags */ + __le16 channel_count; /* minimum 1, maximum 10 */ + __le16 reserved3; + struct iwl4965_measure_channel channels[10]; +} __attribute__ ((packed)); + +/* + * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response) + */ +struct iwl4965_spectrum_resp { + u8 token; + u8 id; /* id of the prior command replaced, or 0xff */ + __le16 status; /* 0 - command will be handled + * 1 - cannot handle (conflicts with another + * measurement) */ +} __attribute__ ((packed)); + +enum iwl4965_measurement_state { + IWL_MEASUREMENT_START = 0, + IWL_MEASUREMENT_STOP = 1, +}; + +enum iwl4965_measurement_status { + IWL_MEASUREMENT_OK = 0, + IWL_MEASUREMENT_CONCURRENT = 1, + IWL_MEASUREMENT_CSA_CONFLICT = 2, + IWL_MEASUREMENT_TGH_CONFLICT = 3, + /* 4-5 reserved */ + IWL_MEASUREMENT_STOPPED = 6, + IWL_MEASUREMENT_TIMEOUT = 7, + IWL_MEASUREMENT_PERIODIC_FAILED = 8, +}; + +#define NUM_ELEMENTS_IN_HISTOGRAM 8 + +struct iwl4965_measurement_histogram { + __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */ + __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */ +} __attribute__ ((packed)); + +/* clear channel availability counters */ +struct iwl4965_measurement_cca_counters { + __le32 ofdm; + __le32 cck; +} __attribute__ ((packed)); + +enum iwl4965_measure_type { + IWL_MEASURE_BASIC = (1 << 0), + IWL_MEASURE_CHANNEL_LOAD = (1 << 1), + IWL_MEASURE_HISTOGRAM_RPI = (1 << 2), + IWL_MEASURE_HISTOGRAM_NOISE = (1 << 3), + IWL_MEASURE_FRAME = (1 << 4), + /* bits 5:6 are reserved */ + IWL_MEASURE_IDLE = (1 << 7), +}; + +/* + * SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command) + */ +struct iwl4965_spectrum_notification { + u8 id; /* measurement id -- 0 or 1 */ + u8 token; + u8 channel_index; /* index in measurement channel list */ + u8 state; /* 0 - start, 1 - stop */ + __le32 start_time; /* lower 32-bits of TSF */ + u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */ + u8 channel; + u8 type; /* see enum iwl4965_measurement_type */ + u8 reserved1; + /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only + * valid if applicable for measurement type requested. */ + __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */ + __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */ + __le32 cca_time; /* channel load time in usecs */ + u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 - + * unidentified */ + u8 reserved2[3]; + struct iwl4965_measurement_histogram histogram; + __le32 stop_time; /* lower 32-bits of TSF */ + __le32 status; /* see iwl4965_measurement_status */ +} __attribute__ ((packed)); + +/****************************************************************************** + * (7) + * Power Management Commands, Responses, Notifications: + * + *****************************************************************************/ + +/** + * struct iwl_powertable_cmd - Power Table Command + * @flags: See below: + * + * POWER_TABLE_CMD = 0x77 (command, has simple generic response) + * + * PM allow: + * bit 0 - '0' Driver not allow power management + * '1' Driver allow PM (use rest of parameters) + * uCode send sleep notifications: + * bit 1 - '0' Don't send sleep notification + * '1' send sleep notification (SEND_PM_NOTIFICATION) + * Sleep over DTIM + * bit 2 - '0' PM have to walk up every DTIM + * '1' PM could sleep over DTIM till listen Interval. + * PCI power managed + * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1) + * '1' !(PCI_CFG_LINK_CTRL & 0x1) + * Force sleep Modes + * bit 31/30- '00' use both mac/xtal sleeps + * '01' force Mac sleep + * '10' force xtal sleep + * '11' Illegal set + * + * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then + * ucode assume sleep over DTIM is allowed and we don't need to wakeup + * for every DTIM. + */ +#define IWL_POWER_VEC_SIZE 5 + +#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK __constant_cpu_to_le16(1 << 0) +#define IWL_POWER_SLEEP_OVER_DTIM_MSK __constant_cpu_to_le16(1 << 2) +#define IWL_POWER_PCI_PM_MSK __constant_cpu_to_le16(1 << 3) +#define IWL_POWER_FAST_PD __constant_cpu_to_le16(1 << 4) + +struct iwl_powertable_cmd { + __le16 flags; + u8 keep_alive_seconds; + u8 debug_flags; + __le32 rx_data_timeout; + __le32 tx_data_timeout; + __le32 sleep_interval[IWL_POWER_VEC_SIZE]; + __le32 keep_alive_beacons; +} __attribute__ ((packed)); + +/* + * PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command) + * 3945 and 4965 identical. + */ +struct iwl4965_sleep_notification { + u8 pm_sleep_mode; + u8 pm_wakeup_src; + __le16 reserved; + __le32 sleep_time; + __le32 tsf_low; + __le32 bcon_timer; +} __attribute__ ((packed)); + +/* Sleep states. 3945 and 4965 identical. */ +enum { + IWL_PM_NO_SLEEP = 0, + IWL_PM_SLP_MAC = 1, + IWL_PM_SLP_FULL_MAC_UNASSOCIATE = 2, + IWL_PM_SLP_FULL_MAC_CARD_STATE = 3, + IWL_PM_SLP_PHY = 4, + IWL_PM_SLP_REPENT = 5, + IWL_PM_WAKEUP_BY_TIMER = 6, + IWL_PM_WAKEUP_BY_DRIVER = 7, + IWL_PM_WAKEUP_BY_RFKILL = 8, + /* 3 reserved */ + IWL_PM_NUM_OF_MODES = 12, +}; + +/* + * REPLY_CARD_STATE_CMD = 0xa0 (command, has simple generic response) + */ +#define CARD_STATE_CMD_DISABLE 0x00 /* Put card to sleep */ +#define CARD_STATE_CMD_ENABLE 0x01 /* Wake up card */ +#define CARD_STATE_CMD_HALT 0x02 /* Power down permanently */ +struct iwl4965_card_state_cmd { + __le32 status; /* CARD_STATE_CMD_* request new power state */ +} __attribute__ ((packed)); + +/* + * CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command) + */ +struct iwl4965_card_state_notif { + __le32 flags; +} __attribute__ ((packed)); + +#define HW_CARD_DISABLED 0x01 +#define SW_CARD_DISABLED 0x02 +#define RF_CARD_DISABLED 0x04 +#define RXON_CARD_DISABLED 0x10 + +struct iwl_ct_kill_config { + __le32 reserved; + __le32 critical_temperature_M; + __le32 critical_temperature_R; +} __attribute__ ((packed)); + +/****************************************************************************** + * (8) + * Scan Commands, Responses, Notifications: + * + *****************************************************************************/ + +#define SCAN_CHANNEL_TYPE_PASSIVE __constant_cpu_to_le32(0) +#define SCAN_CHANNEL_TYPE_ACTIVE __constant_cpu_to_le32(1) + +/** + * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table + * + * One for each channel in the scan list. + * Each channel can independently select: + * 1) SSID for directed active scans + * 2) Txpower setting (for rate specified within Tx command) + * 3) How long to stay on-channel (behavior may be modified by quiet_time, + * quiet_plcp_th, good_CRC_th) + * + * To avoid uCode errors, make sure the following are true (see comments + * under struct iwl_scan_cmd about max_out_time and quiet_time): + * 1) If using passive_dwell (i.e. passive_dwell != 0): + * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) + * 2) quiet_time <= active_dwell + * 3) If restricting off-channel time (i.e. max_out_time !=0): + * passive_dwell < max_out_time + * active_dwell < max_out_time + */ +struct iwl_scan_channel { + /* + * type is defined as: + * 0:0 1 = active, 0 = passive + * 1:20 SSID direct bit map; if a bit is set, then corresponding + * SSID IE is transmitted in probe request. + * 21:31 reserved + */ + __le32 type; + __le16 channel; /* band is selected by iwl_scan_cmd "flags" field */ + u8 tx_gain; /* gain for analog radio */ + u8 dsp_atten; /* gain for DSP */ + __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ + __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ +} __attribute__ ((packed)); + +/** + * struct iwl_ssid_ie - directed scan network information element + * + * Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field + * in struct iwl4965_scan_channel; each channel may select different ssids from + * among the 4 entries. SSID IEs get transmitted in reverse order of entry. + */ +struct iwl_ssid_ie { + u8 id; + u8 len; + u8 ssid[32]; +} __attribute__ ((packed)); + +#define PROBE_OPTION_MAX 0x14 +#define TX_CMD_LIFE_TIME_INFINITE __constant_cpu_to_le32(0xFFFFFFFF) +#define IWL_GOOD_CRC_TH __constant_cpu_to_le16(1) +#define IWL_MAX_SCAN_SIZE 1024 + +/* + * REPLY_SCAN_CMD = 0x80 (command) + * + * The hardware scan command is very powerful; the driver can set it up to + * maintain (relatively) normal network traffic while doing a scan in the + * background. The max_out_time and suspend_time control the ratio of how + * long the device stays on an associated network channel ("service channel") + * vs. how long it's away from the service channel, i.e. tuned to other channels + * for scanning. + * + * max_out_time is the max time off-channel (in usec), and suspend_time + * is how long (in "extended beacon" format) that the scan is "suspended" + * after returning to the service channel. That is, suspend_time is the + * time that we stay on the service channel, doing normal work, between + * scan segments. The driver may set these parameters differently to support + * scanning when associated vs. not associated, and light vs. heavy traffic + * loads when associated. + * + * After receiving this command, the device's scan engine does the following; + * + * 1) Sends SCAN_START notification to driver + * 2) Checks to see if it has time to do scan for one channel + * 3) Sends NULL packet, with power-save (PS) bit set to 1, + * to tell AP that we're going off-channel + * 4) Tunes to first channel in scan list, does active or passive scan + * 5) Sends SCAN_RESULT notification to driver + * 6) Checks to see if it has time to do scan on *next* channel in list + * 7) Repeats 4-6 until it no longer has time to scan the next channel + * before max_out_time expires + * 8) Returns to service channel + * 9) Sends NULL packet with PS=0 to tell AP that we're back + * 10) Stays on service channel until suspend_time expires + * 11) Repeats entire process 2-10 until list is complete + * 12) Sends SCAN_COMPLETE notification + * + * For fast, efficient scans, the scan command also has support for staying on + * a channel for just a short time, if doing active scanning and getting no + * responses to the transmitted probe request. This time is controlled by + * quiet_time, and the number of received packets below which a channel is + * considered "quiet" is controlled by quiet_plcp_threshold. + * + * For active scanning on channels that have regulatory restrictions against + * blindly transmitting, the scan can listen before transmitting, to make sure + * that there is already legitimate activity on the channel. If enough + * packets are cleanly received on the channel (controlled by good_CRC_th, + * typical value 1), the scan engine starts transmitting probe requests. + * + * Driver must use separate scan commands for 2.4 vs. 5 GHz bands. + * + * To avoid uCode errors, see timing restrictions described under + * struct iwl_scan_channel. + */ +struct iwl_scan_cmd { + __le16 len; + u8 reserved0; + u8 channel_count; /* # channels in channel list */ + __le16 quiet_time; /* dwell only this # millisecs on quiet channel + * (only for active scan) */ + __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ + __le16 good_CRC_th; /* passive -> active promotion threshold */ + __le16 rx_chain; /* RXON_RX_CHAIN_* */ + __le32 max_out_time; /* max usec to be away from associated (service) + * channel */ + __le32 suspend_time; /* pause scan this long (in "extended beacon + * format") when returning to service chnl: + * 3945; 31:24 # beacons, 19:0 additional usec, + * 4965; 31:22 # beacons, 21:0 additional usec. + */ + __le32 flags; /* RXON_FLG_* */ + __le32 filter_flags; /* RXON_FILTER_* */ + + /* For active scans (set to all-0s for passive scans). + * Does not include payload. Must specify Tx rate; no rate scaling. */ + struct iwl_tx_cmd tx_cmd; + + /* For directed active scans (set to all-0s otherwise) */ + struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; + + /* + * Probe request frame, followed by channel list. + * + * Size of probe request frame is specified by byte count in tx_cmd. + * Channel list follows immediately after probe request frame. + * Number of channels in list is specified by channel_count. + * Each channel in list is of type: + * + * struct iwl4965_scan_channel channels[0]; + * + * NOTE: Only one band of channels can be scanned per pass. You + * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait + * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION) + * before requesting another scan. + */ + u8 data[0]; +} __attribute__ ((packed)); + +/* Can abort will notify by complete notification with abort status. */ +#define CAN_ABORT_STATUS __constant_cpu_to_le32(0x1) +/* complete notification statuses */ +#define ABORT_STATUS 0x2 + +/* + * REPLY_SCAN_CMD = 0x80 (response) + */ +struct iwl_scanreq_notification { + __le32 status; /* 1: okay, 2: cannot fulfill request */ +} __attribute__ ((packed)); + +/* + * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command) + */ +struct iwl_scanstart_notification { + __le32 tsf_low; + __le32 tsf_high; + __le32 beacon_timer; + u8 channel; + u8 band; + u8 reserved[2]; + __le32 status; +} __attribute__ ((packed)); + +#define SCAN_OWNER_STATUS 0x1; +#define MEASURE_OWNER_STATUS 0x2; + +#define NUMBER_OF_STATISTICS 1 /* first __le32 is good CRC */ +/* + * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command) + */ +struct iwl_scanresults_notification { + u8 channel; + u8 band; + u8 reserved[2]; + __le32 tsf_low; + __le32 tsf_high; + __le32 statistics[NUMBER_OF_STATISTICS]; +} __attribute__ ((packed)); + +/* + * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command) + */ +struct iwl_scancomplete_notification { + u8 scanned_channels; + u8 status; + u8 reserved; + u8 last_channel; + __le32 tsf_low; + __le32 tsf_high; +} __attribute__ ((packed)); + + +/****************************************************************************** + * (9) + * IBSS/AP Commands and Notifications: + * + *****************************************************************************/ + +/* + * BEACON_NOTIFICATION = 0x90 (notification only, not a command) + */ +struct iwl4965_beacon_notif { + struct iwl4965_tx_resp beacon_notify_hdr; + __le32 low_tsf; + __le32 high_tsf; + __le32 ibss_mgr_status; +} __attribute__ ((packed)); + +/* + * REPLY_TX_BEACON = 0x91 (command, has simple generic response) + */ +struct iwl_tx_beacon_cmd { + struct iwl_tx_cmd tx; + __le16 tim_idx; + u8 tim_size; + u8 reserved1; + struct ieee80211_hdr frame[0]; /* beacon frame */ +} __attribute__ ((packed)); + +/****************************************************************************** + * (10) + * Statistics Commands and Notifications: + * + *****************************************************************************/ + +#define IWL_TEMP_CONVERT 260 + +#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 +#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 +#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 + +/* Used for passing to driver number of successes and failures per rate */ +struct rate_histogram { + union { + __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; + __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; + __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; + } success; + union { + __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; + __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; + __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; + } failed; +} __attribute__ ((packed)); + +/* statistics command response */ + +struct statistics_rx_phy { + __le32 ina_cnt; + __le32 fina_cnt; + __le32 plcp_err; + __le32 crc32_err; + __le32 overrun_err; + __le32 early_overrun_err; + __le32 crc32_good; + __le32 false_alarm_cnt; + __le32 fina_sync_err_cnt; + __le32 sfd_timeout; + __le32 fina_timeout; + __le32 unresponded_rts; + __le32 rxe_frame_limit_overrun; + __le32 sent_ack_cnt; + __le32 sent_cts_cnt; + __le32 sent_ba_rsp_cnt; + __le32 dsp_self_kill; + __le32 mh_format_err; + __le32 re_acq_main_rssi_sum; + __le32 reserved3; +} __attribute__ ((packed)); + +struct statistics_rx_ht_phy { + __le32 plcp_err; + __le32 overrun_err; + __le32 early_overrun_err; + __le32 crc32_good; + __le32 crc32_err; + __le32 mh_format_err; + __le32 agg_crc32_good; + __le32 agg_mpdu_cnt; + __le32 agg_cnt; + __le32 reserved2; +} __attribute__ ((packed)); + +struct statistics_rx_non_phy { + __le32 bogus_cts; /* CTS received when not expecting CTS */ + __le32 bogus_ack; /* ACK received when not expecting ACK */ + __le32 non_bssid_frames; /* number of frames with BSSID that + * doesn't belong to the STA BSSID */ + __le32 filtered_frames; /* count frames that were dumped in the + * filtering process */ + __le32 non_channel_beacons; /* beacons with our bss id but not on + * our serving channel */ + __le32 channel_beacons; /* beacons with our bss id and in our + * serving channel */ + __le32 num_missed_bcon; /* number of missed beacons */ + __le32 adc_rx_saturation_time; /* count in 0.8us units the time the + * ADC was in saturation */ + __le32 ina_detection_search_time;/* total time (in 0.8us) searched + * for INA */ + __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */ + __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */ + __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */ + __le32 interference_data_flag; /* flag for interference data + * availability. 1 when data is + * available. */ + __le32 channel_load; /* counts RX Enable time in uSec */ + __le32 dsp_false_alarms; /* DSP false alarm (both OFDM + * and CCK) counter */ + __le32 beacon_rssi_a; + __le32 beacon_rssi_b; + __le32 beacon_rssi_c; + __le32 beacon_energy_a; + __le32 beacon_energy_b; + __le32 beacon_energy_c; +} __attribute__ ((packed)); + +struct statistics_rx { + struct statistics_rx_phy ofdm; + struct statistics_rx_phy cck; + struct statistics_rx_non_phy general; + struct statistics_rx_ht_phy ofdm_ht; +} __attribute__ ((packed)); + +struct statistics_tx_non_phy_agg { + __le32 ba_timeout; + __le32 ba_reschedule_frames; + __le32 scd_query_agg_frame_cnt; + __le32 scd_query_no_agg; + __le32 scd_query_agg; + __le32 scd_query_mismatch; + __le32 frame_not_ready; + __le32 underrun; + __le32 bt_prio_kill; + __le32 rx_ba_rsp_cnt; + __le32 reserved2; + __le32 reserved3; +} __attribute__ ((packed)); + +struct statistics_tx { + __le32 preamble_cnt; + __le32 rx_detected_cnt; + __le32 bt_prio_defer_cnt; + __le32 bt_prio_kill_cnt; + __le32 few_bytes_cnt; + __le32 cts_timeout; + __le32 ack_timeout; + __le32 expected_ack_cnt; + __le32 actual_ack_cnt; + __le32 dump_msdu_cnt; + __le32 burst_abort_next_frame_mismatch_cnt; + __le32 burst_abort_missing_next_frame_cnt; + __le32 cts_timeout_collision; + __le32 ack_or_ba_timeout_collision; + struct statistics_tx_non_phy_agg agg; +} __attribute__ ((packed)); + +struct statistics_dbg { + __le32 burst_check; + __le32 burst_count; + __le32 reserved[4]; +} __attribute__ ((packed)); + +struct statistics_div { + __le32 tx_on_a; + __le32 tx_on_b; + __le32 exec_time; + __le32 probe_time; + __le32 reserved1; + __le32 reserved2; +} __attribute__ ((packed)); + +struct statistics_general { + __le32 temperature; + __le32 temperature_m; + struct statistics_dbg dbg; + __le32 sleep_time; + __le32 slots_out; + __le32 slots_idle; + __le32 ttl_timestamp; + struct statistics_div div; + __le32 rx_enable_counter; + __le32 reserved1; + __le32 reserved2; + __le32 reserved3; +} __attribute__ ((packed)); + +/* + * REPLY_STATISTICS_CMD = 0x9c, + * 3945 and 4965 identical. + * + * This command triggers an immediate response containing uCode statistics. + * The response is in the same format as STATISTICS_NOTIFICATION 0x9d, below. + * + * If the CLEAR_STATS configuration flag is set, uCode will clear its + * internal copy of the statistics (counters) after issuing the response. + * This flag does not affect STATISTICS_NOTIFICATIONs after beacons (see below). + * + * If the DISABLE_NOTIF configuration flag is set, uCode will not issue + * STATISTICS_NOTIFICATIONs after received beacons (see below). This flag + * does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself. + */ +#define IWL_STATS_CONF_CLEAR_STATS __constant_cpu_to_le32(0x1) /* see above */ +#define IWL_STATS_CONF_DISABLE_NOTIF __constant_cpu_to_le32(0x2)/* see above */ +struct iwl_statistics_cmd { + __le32 configuration_flags; /* IWL_STATS_CONF_* */ +} __attribute__ ((packed)); + +/* + * STATISTICS_NOTIFICATION = 0x9d (notification only, not a command) + * + * By default, uCode issues this notification after receiving a beacon + * while associated. To disable this behavior, set DISABLE_NOTIF flag in the + * REPLY_STATISTICS_CMD 0x9c, above. + * + * Statistics counters continue to increment beacon after beacon, but are + * cleared when changing channels or when driver issues REPLY_STATISTICS_CMD + * 0x9c with CLEAR_STATS bit set (see above). + * + * uCode also issues this notification during scans. uCode clears statistics + * appropriately so that each notification contains statistics for only the + * one channel that has just been scanned. + */ +#define STATISTICS_REPLY_FLG_BAND_24G_MSK __constant_cpu_to_le32(0x2) +#define STATISTICS_REPLY_FLG_FAT_MODE_MSK __constant_cpu_to_le32(0x8) +struct iwl_notif_statistics { + __le32 flag; + struct statistics_rx rx; + struct statistics_tx tx; + struct statistics_general general; +} __attribute__ ((packed)); + + +/* + * MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command) + */ +/* if ucode missed CONSECUTIVE_MISSED_BCONS_TH beacons in a row, + * then this notification will be sent. */ +#define CONSECUTIVE_MISSED_BCONS_TH 20 + +struct iwl4965_missed_beacon_notif { + __le32 consequtive_missed_beacons; + __le32 total_missed_becons; + __le32 num_expected_beacons; + __le32 num_recvd_beacons; +} __attribute__ ((packed)); + + +/****************************************************************************** + * (11) + * Rx Calibration Commands: + * + * With the uCode used for open source drivers, most Tx calibration (except + * for Tx Power) and most Rx calibration is done by uCode during the + * "initialize" phase of uCode boot. Driver must calibrate only: + * + * 1) Tx power (depends on temperature), described elsewhere + * 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas) + * 3) Receiver sensitivity (to optimize signal detection) + * + *****************************************************************************/ + +/** + * SENSITIVITY_CMD = 0xa8 (command, has simple generic response) + * + * This command sets up the Rx signal detector for a sensitivity level that + * is high enough to lock onto all signals within the associated network, + * but low enough to ignore signals that are below a certain threshold, so as + * not to have too many "false alarms". False alarms are signals that the + * Rx DSP tries to lock onto, but then discards after determining that they + * are noise. + * + * The optimum number of false alarms is between 5 and 50 per 200 TUs + * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e. + * time listening, not transmitting). Driver must adjust sensitivity so that + * the ratio of actual false alarms to actual Rx time falls within this range. + * + * While associated, uCode delivers STATISTICS_NOTIFICATIONs after each + * received beacon. These provide information to the driver to analyze the + * sensitivity. Don't analyze statistics that come in from scanning, or any + * other non-associated-network source. Pertinent statistics include: + * + * From "general" statistics (struct statistics_rx_non_phy): + * + * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level) + * Measure of energy of desired signal. Used for establishing a level + * below which the device does not detect signals. + * + * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB) + * Measure of background noise in silent period after beacon. + * + * channel_load + * uSecs of actual Rx time during beacon period (varies according to + * how much time was spent transmitting). + * + * From "cck" and "ofdm" statistics (struct statistics_rx_phy), separately: + * + * false_alarm_cnt + * Signal locks abandoned early (before phy-level header). + * + * plcp_err + * Signal locks abandoned late (during phy-level header). + * + * NOTE: Both false_alarm_cnt and plcp_err increment monotonically from + * beacon to beacon, i.e. each value is an accumulation of all errors + * before and including the latest beacon. Values will wrap around to 0 + * after counting up to 2^32 - 1. Driver must differentiate vs. + * previous beacon's values to determine # false alarms in the current + * beacon period. + * + * Total number of false alarms = false_alarms + plcp_errs + * + * For OFDM, adjust the following table entries in struct iwl_sensitivity_cmd + * (notice that the start points for OFDM are at or close to settings for + * maximum sensitivity): + * + * START / MIN / MAX + * HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX 90 / 85 / 120 + * HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX 170 / 170 / 210 + * HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX 105 / 105 / 140 + * HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX 220 / 220 / 270 + * + * If actual rate of OFDM false alarms (+ plcp_errors) is too high + * (greater than 50 for each 204.8 msecs listening), reduce sensitivity + * by *adding* 1 to all 4 of the table entries above, up to the max for + * each entry. Conversely, if false alarm rate is too low (less than 5 + * for each 204.8 msecs listening), *subtract* 1 from each entry to + * increase sensitivity. + * + * For CCK sensitivity, keep track of the following: + * + * 1). 20-beacon history of maximum background noise, indicated by + * (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the + * 3 receivers. For any given beacon, the "silence reference" is + * the maximum of last 60 samples (20 beacons * 3 receivers). + * + * 2). 10-beacon history of strongest signal level, as indicated + * by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers, + * i.e. the strength of the signal through the best receiver at the + * moment. These measurements are "upside down", with lower values + * for stronger signals, so max energy will be *minimum* value. + * + * Then for any given beacon, the driver must determine the *weakest* + * of the strongest signals; this is the minimum level that needs to be + * successfully detected, when using the best receiver at the moment. + * "Max cck energy" is the maximum (higher value means lower energy!) + * of the last 10 minima. Once this is determined, driver must add + * a little margin by adding "6" to it. + * + * 3). Number of consecutive beacon periods with too few false alarms. + * Reset this to 0 at the first beacon period that falls within the + * "good" range (5 to 50 false alarms per 204.8 milliseconds rx). + * + * Then, adjust the following CCK table entries in struct iwl_sensitivity_cmd + * (notice that the start points for CCK are at maximum sensitivity): + * + * START / MIN / MAX + * HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX 125 / 125 / 200 + * HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX 200 / 200 / 400 + * HD_MIN_ENERGY_CCK_DET_INDEX 100 / 0 / 100 + * + * If actual rate of CCK false alarms (+ plcp_errors) is too high + * (greater than 50 for each 204.8 msecs listening), method for reducing + * sensitivity is: + * + * 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX, + * up to max 400. + * + * 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is < 160, + * sensitivity has been reduced a significant amount; bring it up to + * a moderate 161. Otherwise, *add* 3, up to max 200. + * + * 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is > 160, + * sensitivity has been reduced only a moderate or small amount; + * *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_INDEX, + * down to min 0. Otherwise (if gain has been significantly reduced), + * don't change the HD_MIN_ENERGY_CCK_DET_INDEX value. + * + * b) Save a snapshot of the "silence reference". + * + * If actual rate of CCK false alarms (+ plcp_errors) is too low + * (less than 5 for each 204.8 msecs listening), method for increasing + * sensitivity is used only if: + * + * 1a) Previous beacon did not have too many false alarms + * 1b) AND difference between previous "silence reference" and current + * "silence reference" (prev - current) is 2 or more, + * OR 2) 100 or more consecutive beacon periods have had rate of + * less than 5 false alarms per 204.8 milliseconds rx time. + * + * Method for increasing sensitivity: + * + * 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX, + * down to min 125. + * + * 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX, + * down to min 200. + * + * 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_INDEX, up to max 100. + * + * If actual rate of CCK false alarms (+ plcp_errors) is within good range + * (between 5 and 50 for each 204.8 msecs listening): + * + * 1) Save a snapshot of the silence reference. + * + * 2) If previous beacon had too many CCK false alarms (+ plcp_errors), + * give some extra margin to energy threshold by *subtracting* 8 + * from value in HD_MIN_ENERGY_CCK_DET_INDEX. + * + * For all cases (too few, too many, good range), make sure that the CCK + * detection threshold (energy) is below the energy level for robust + * detection over the past 10 beacon periods, the "Max cck energy". + * Lower values mean higher energy; this means making sure that the value + * in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy". + * + * Driver should set the following entries to fixed values: + * + * HD_MIN_ENERGY_OFDM_DET_INDEX 100 + * HD_BARKER_CORR_TH_ADD_MIN_INDEX 190 + * HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX 390 + * HD_OFDM_ENERGY_TH_IN_INDEX 62 + */ + +/* + * Table entries in SENSITIVITY_CMD (struct iwl_sensitivity_cmd) + */ +#define HD_TABLE_SIZE (11) /* number of entries */ +#define HD_MIN_ENERGY_CCK_DET_INDEX (0) /* table indexes */ +#define HD_MIN_ENERGY_OFDM_DET_INDEX (1) +#define HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX (2) +#define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX (3) +#define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX (4) +#define HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX (5) +#define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX (6) +#define HD_BARKER_CORR_TH_ADD_MIN_INDEX (7) +#define HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX (8) +#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9) +#define HD_OFDM_ENERGY_TH_IN_INDEX (10) + +/* Control field in struct iwl_sensitivity_cmd */ +#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE __constant_cpu_to_le16(0) +#define SENSITIVITY_CMD_CONTROL_WORK_TABLE __constant_cpu_to_le16(1) + +/** + * struct iwl_sensitivity_cmd + * @control: (1) updates working table, (0) updates default table + * @table: energy threshold values, use HD_* as index into table + * + * Always use "1" in "control" to update uCode's working table and DSP. + */ +struct iwl_sensitivity_cmd { + __le16 control; /* always use "1" */ + __le16 table[HD_TABLE_SIZE]; /* use HD_* as index */ +} __attribute__ ((packed)); + + +/** + * REPLY_PHY_CALIBRATION_CMD = 0xb0 (command, has simple generic response) + * + * This command sets the relative gains of 4965's 3 radio receiver chains. + * + * After the first association, driver should accumulate signal and noise + * statistics from the STATISTICS_NOTIFICATIONs that follow the first 20 + * beacons from the associated network (don't collect statistics that come + * in from scanning, or any other non-network source). + * + * DISCONNECTED ANTENNA: + * + * Driver should determine which antennas are actually connected, by comparing + * average beacon signal levels for the 3 Rx chains. Accumulate (add) the + * following values over 20 beacons, one accumulator for each of the chains + * a/b/c, from struct statistics_rx_non_phy: + * + * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB) + * + * Find the strongest signal from among a/b/c. Compare the other two to the + * strongest. If any signal is more than 15 dB (times 20, unless you + * divide the accumulated values by 20) below the strongest, the driver + * considers that antenna to be disconnected, and should not try to use that + * antenna/chain for Rx or Tx. If both A and B seem to be disconnected, + * driver should declare the stronger one as connected, and attempt to use it + * (A and B are the only 2 Tx chains!). + * + * + * RX BALANCE: + * + * Driver should balance the 3 receivers (but just the ones that are connected + * to antennas, see above) for gain, by comparing the average signal levels + * detected during the silence after each beacon (background noise). + * Accumulate (add) the following values over 20 beacons, one accumulator for + * each of the chains a/b/c, from struct statistics_rx_non_phy: + * + * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB) + * + * Find the weakest background noise level from among a/b/c. This Rx chain + * will be the reference, with 0 gain adjustment. Attenuate other channels by + * finding noise difference: + * + * (accum_noise[i] - accum_noise[reference]) / 30 + * + * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB. + * For use in diff_gain_[abc] fields of struct iwl_calibration_cmd, the + * driver should limit the difference results to a range of 0-3 (0-4.5 dB), + * and set bit 2 to indicate "reduce gain". The value for the reference + * (weakest) chain should be "0". + * + * diff_gain_[abc] bit fields: + * 2: (1) reduce gain, (0) increase gain + * 1-0: amount of gain, units of 1.5 dB + */ + +/* "Differential Gain" opcode used in REPLY_PHY_CALIBRATION_CMD. */ +#define PHY_CALIBRATE_DIFF_GAIN_CMD (7) + +struct iwl4965_calibration_cmd { + u8 opCode; /* PHY_CALIBRATE_DIFF_GAIN_CMD (7) */ + u8 flags; /* not used */ + __le16 reserved; + s8 diff_gain_a; /* see above */ + s8 diff_gain_b; + s8 diff_gain_c; + u8 reserved1; +} __attribute__ ((packed)); + +/* Phy calibration command for 5000 series */ + +enum { + IWL5000_PHY_CALIBRATE_DC_CMD = 8, + IWL5000_PHY_CALIBRATE_LO_CMD = 9, + IWL5000_PHY_CALIBRATE_RX_BB_CMD = 10, + IWL5000_PHY_CALIBRATE_TX_IQ_CMD = 11, + IWL5000_PHY_CALIBRATE_RX_IQ_CMD = 12, + IWL5000_PHY_CALIBRATION_NOISE_CMD = 13, + IWL5000_PHY_CALIBRATE_AGC_TABLE_CMD = 14, + IWL5000_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15, + IWL5000_PHY_CALIBRATE_BASE_BAND_CMD = 16, + IWL5000_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17, + IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD = 18, + IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD = 19, +}; + +enum { + CALIBRATION_CFG_CMD = 0x65, + CALIBRATION_RES_NOTIFICATION = 0x66, + CALIBRATION_COMPLETE_NOTIFICATION = 0x67 +}; + +struct iwl_cal_crystal_freq_cmd { + u8 cap_pin1; + u8 cap_pin2; +} __attribute__ ((packed)); + +struct iwl5000_calibration { + u8 op_code; + u8 first_group; + u8 num_groups; + u8 all_data_valid; + struct iwl_cal_crystal_freq_cmd data; +} __attribute__ ((packed)); + +#define IWL_CALIB_INIT_CFG_ALL __constant_cpu_to_le32(0xffffffff) + +struct iwl_calib_cfg_elmnt_s { + __le32 is_enable; + __le32 start; + __le32 send_res; + __le32 apply_res; + __le32 reserved; +} __attribute__ ((packed)); + +struct iwl_calib_cfg_status_s { + struct iwl_calib_cfg_elmnt_s once; + struct iwl_calib_cfg_elmnt_s perd; + __le32 flags; +} __attribute__ ((packed)); + +struct iwl5000_calib_cfg_cmd { + struct iwl_calib_cfg_status_s ucd_calib_cfg; + struct iwl_calib_cfg_status_s drv_calib_cfg; + __le32 reserved1; +} __attribute__ ((packed)); + +struct iwl5000_calib_hdr { + u8 op_code; + u8 first_group; + u8 groups_num; + u8 data_valid; +} __attribute__ ((packed)); + +struct iwl5000_calibration_chain_noise_reset_cmd { + u8 op_code; /* IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */ + u8 flags; /* not used */ + __le16 reserved; +} __attribute__ ((packed)); + +struct iwl5000_calibration_chain_noise_gain_cmd { + u8 op_code; /* IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */ + u8 flags; /* not used */ + __le16 reserved; + u8 delta_gain_1; + u8 delta_gain_2; + __le16 reserved1; +} __attribute__ ((packed)); + +/****************************************************************************** + * (12) + * Miscellaneous Commands: + * + *****************************************************************************/ + +/* + * LEDs Command & Response + * REPLY_LEDS_CMD = 0x48 (command, has simple generic response) + * + * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field), + * this command turns it on or off, or sets up a periodic blinking cycle. + */ +struct iwl_led_cmd { + __le32 interval; /* "interval" in uSec */ + u8 id; /* 1: Activity, 2: Link, 3: Tech */ + u8 off; /* # intervals off while blinking; + * "0", with >0 "on" value, turns LED on */ + u8 on; /* # intervals on while blinking; + * "0", regardless of "off", turns LED off */ + u8 reserved; +} __attribute__ ((packed)); + +/* + * Coexistence WIFI/WIMAX Command + * COEX_PRIORITY_TABLE_CMD = 0x5a + * + */ +enum { + COEX_UNASSOC_IDLE = 0, + COEX_UNASSOC_MANUAL_SCAN = 1, + COEX_UNASSOC_AUTO_SCAN = 2, + COEX_CALIBRATION = 3, + COEX_PERIODIC_CALIBRATION = 4, + COEX_CONNECTION_ESTAB = 5, + COEX_ASSOCIATED_IDLE = 6, + COEX_ASSOC_MANUAL_SCAN = 7, + COEX_ASSOC_AUTO_SCAN = 8, + COEX_ASSOC_ACTIVE_LEVEL = 9, + COEX_RF_ON = 10, + COEX_RF_OFF = 11, + COEX_STAND_ALONE_DEBUG = 12, + COEX_IPAN_ASSOC_LEVEL = 13, + COEX_RSRVD1 = 14, + COEX_RSRVD2 = 15, + COEX_NUM_OF_EVENTS = 16 +}; + +struct iwl_wimax_coex_event_entry { + u8 request_prio; + u8 win_medium_prio; + u8 reserved; + u8 flags; +} __attribute__ ((packed)); + +/* COEX flag masks */ + +/* Staion table is valid */ +#define COEX_FLAGS_STA_TABLE_VALID_MSK (0x1) +/* UnMask wakeup src at unassociated sleep */ +#define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK (0x4) +/* UnMask wakeup src at associated sleep */ +#define COEX_FLAGS_ASSOC_WA_UNMASK_MSK (0x8) +/* Enable CoEx feature. */ +#define COEX_FLAGS_COEX_ENABLE_MSK (0x80) + +struct iwl_wimax_coex_cmd { + u8 flags; + u8 reserved[3]; + struct iwl_wimax_coex_event_entry sta_prio[COEX_NUM_OF_EVENTS]; +} __attribute__ ((packed)); + +/****************************************************************************** + * (13) + * Union of all expected notifications/responses: + * + *****************************************************************************/ + +struct iwl_rx_packet { + __le32 len; + struct iwl_cmd_header hdr; + union { + struct iwl_alive_resp alive_frame; + struct iwl4965_rx_frame rx_frame; + struct iwl4965_tx_resp tx_resp; + struct iwl4965_spectrum_notification spectrum_notif; + struct iwl4965_csa_notification csa_notif; + struct iwl_error_resp err_resp; + struct iwl4965_card_state_notif card_state_notif; + struct iwl4965_beacon_notif beacon_status; + struct iwl_add_sta_resp add_sta; + struct iwl_rem_sta_resp rem_sta; + struct iwl4965_sleep_notification sleep_notif; + struct iwl4965_spectrum_resp spectrum; + struct iwl_notif_statistics stats; + struct iwl_compressed_ba_resp compressed_ba; + struct iwl4965_missed_beacon_notif missed_beacon; + struct iwl5000_calibration calib; + __le32 status; + u8 raw[0]; + } u; +} __attribute__ ((packed)); + +#define IWL_RX_FRAME_SIZE (4 + sizeof(struct iwl4965_rx_frame)) + +#endif /* __iwl4965_commands_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 2dfd982..8c6e46a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -34,9 +34,11 @@ struct iwl_priv; /* FIXME: remove */ #include "iwl-debug.h" #include "iwl-eeprom.h" -#include "iwl-4965.h" /* FIXME: remove */ +#include "iwl-dev.h" /* FIXME: remove */ #include "iwl-core.h" +#include "iwl-io.h" #include "iwl-rfkill.h" +#include "iwl-power.h" MODULE_DESCRIPTION("iwl core"); @@ -44,10 +46,108 @@ MODULE_VERSION(IWLWIFI_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -#ifdef CONFIG_IWLWIFI_DEBUG -u32 iwl_debug_level; -EXPORT_SYMBOL(iwl_debug_level); -#endif +#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ + [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ + IWL_RATE_SISO_##s##M_PLCP, \ + IWL_RATE_MIMO2_##s##M_PLCP,\ + IWL_RATE_MIMO3_##s##M_PLCP,\ + IWL_RATE_##r##M_IEEE, \ + IWL_RATE_##ip##M_INDEX, \ + IWL_RATE_##in##M_INDEX, \ + IWL_RATE_##rp##M_INDEX, \ + IWL_RATE_##rn##M_INDEX, \ + IWL_RATE_##pp##M_INDEX, \ + IWL_RATE_##np##M_INDEX } + +/* + * Parameter order: + * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate + * + * If there isn't a valid next or previous rate then INV is used which + * maps to IWL_RATE_INVALID + * + */ +const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = { + IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ + IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ + IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ + IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ + IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ + IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ + IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ + IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ + IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ + IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ + IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ + IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ + IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ + /* FIXME:RS: ^^ should be INV (legacy) */ +}; +EXPORT_SYMBOL(iwl_rates); + +/** + * translate ucode response to mac80211 tx status control values + */ +void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, + struct ieee80211_tx_control *control) +{ + int rate_index; + + control->antenna_sel_tx = + ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); + if (rate_n_flags & RATE_MCS_HT_MSK) + control->flags |= IEEE80211_TXCTL_OFDM_HT; + if (rate_n_flags & RATE_MCS_GF_MSK) + control->flags |= IEEE80211_TXCTL_GREEN_FIELD; + if (rate_n_flags & RATE_MCS_FAT_MSK) + control->flags |= IEEE80211_TXCTL_40_MHZ_WIDTH; + if (rate_n_flags & RATE_MCS_DUP_MSK) + control->flags |= IEEE80211_TXCTL_DUP_DATA; + if (rate_n_flags & RATE_MCS_SGI_MSK) + control->flags |= IEEE80211_TXCTL_SHORT_GI; + rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags); + if (rate_index == -1) + control->tx_rate = NULL; + else + control->tx_rate = + &priv->bands[IEEE80211_BAND_2GHZ].bitrates[rate_index]; +} +EXPORT_SYMBOL(iwl_hwrate_to_tx_control); + +int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) +{ + int idx = 0; + + /* HT rate format */ + if (rate_n_flags & RATE_MCS_HT_MSK) { + idx = (rate_n_flags & 0xff); + + if (idx >= IWL_RATE_MIMO2_6M_PLCP) + idx = idx - IWL_RATE_MIMO2_6M_PLCP; + + idx += IWL_FIRST_OFDM_RATE; + /* skip 9M not supported in ht*/ + if (idx >= IWL_RATE_9M_INDEX) + idx += 1; + if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) + return idx; + + /* legacy rate format, search for match in table */ + } else { + for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) + if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) + return idx; + } + + return -1; +} +EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx); + + + +const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; +EXPORT_SYMBOL(iwl_bcast_addr); + /* This function both allocates and initializes hw and priv. */ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, @@ -72,25 +172,132 @@ out: } EXPORT_SYMBOL(iwl_alloc_all); +void iwl_hw_detect(struct iwl_priv *priv) +{ + priv->hw_rev = _iwl_read32(priv, CSR_HW_REV); + priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG); + pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id); +} +EXPORT_SYMBOL(iwl_hw_detect); + +/* Tell nic where to find the "keep warm" buffer */ +int iwl_kw_init(struct iwl_priv *priv) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) + goto out; + + iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG, + priv->kw.dma_addr >> 4); + iwl_release_nic_access(priv); +out: + spin_unlock_irqrestore(&priv->lock, flags); + return ret; +} + +int iwl_kw_alloc(struct iwl_priv *priv) +{ + struct pci_dev *dev = priv->pci_dev; + struct iwl_kw *kw = &priv->kw; + + kw->size = IWL_KW_SIZE; + kw->v_addr = pci_alloc_consistent(dev, kw->size, &kw->dma_addr); + if (!kw->v_addr) + return -ENOMEM; + + return 0; +} + +/** + * iwl_kw_free - Free the "keep warm" buffer + */ +void iwl_kw_free(struct iwl_priv *priv) +{ + struct pci_dev *dev = priv->pci_dev; + struct iwl_kw *kw = &priv->kw; + + if (kw->v_addr) { + pci_free_consistent(dev, kw->size, kw->v_addr, kw->dma_addr); + memset(kw, 0, sizeof(*kw)); + } +} + +int iwl_hw_nic_init(struct iwl_priv *priv) +{ + unsigned long flags; + struct iwl_rx_queue *rxq = &priv->rxq; + int ret; + + /* nic_init */ + spin_lock_irqsave(&priv->lock, flags); + priv->cfg->ops->lib->apm_ops.init(priv); + iwl_write32(priv, CSR_INT_COALESCING, 512 / 32); + spin_unlock_irqrestore(&priv->lock, flags); + + ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN); + + priv->cfg->ops->lib->apm_ops.config(priv); + + /* Allocate the RX queue, or reset if it is already allocated */ + if (!rxq->bd) { + ret = iwl_rx_queue_alloc(priv); + if (ret) { + IWL_ERROR("Unable to initialize Rx queue\n"); + return -ENOMEM; + } + } else + iwl_rx_queue_reset(priv, rxq); + + iwl_rx_replenish(priv); + + iwl_rx_init(priv, rxq); + + spin_lock_irqsave(&priv->lock, flags); + + rxq->need_update = 1; + iwl_rx_queue_update_write_ptr(priv, rxq); + + spin_unlock_irqrestore(&priv->lock, flags); + + /* Allocate and init all Tx and Command queues */ + ret = iwl_txq_ctx_reset(priv); + if (ret) + return ret; + + set_bit(STATUS_INIT, &priv->status); + + return 0; +} +EXPORT_SYMBOL(iwl_hw_nic_init); + /** - * iwlcore_clear_stations_table - Clear the driver's station table + * iwl_clear_stations_table - Clear the driver's station table * * NOTE: This does not clear or otherwise alter the device's station table. */ -void iwlcore_clear_stations_table(struct iwl_priv *priv) +void iwl_clear_stations_table(struct iwl_priv *priv) { unsigned long flags; spin_lock_irqsave(&priv->sta_lock, flags); + if (iwl_is_alive(priv) && + !test_bit(STATUS_EXIT_PENDING, &priv->status) && + iwl_send_cmd_pdu_async(priv, REPLY_REMOVE_ALL_STA, 0, NULL, NULL)) + IWL_ERROR("Couldn't clear the station table\n"); + priv->num_stations = 0; memset(priv->stations, 0, sizeof(priv->stations)); spin_unlock_irqrestore(&priv->sta_lock, flags); } -EXPORT_SYMBOL(iwlcore_clear_stations_table); +EXPORT_SYMBOL(iwl_clear_stations_table); -void iwlcore_reset_qos(struct iwl_priv *priv) +void iwl_reset_qos(struct iwl_priv *priv) { u16 cw_min = 15; u16 cw_max = 1023; @@ -176,10 +383,415 @@ void iwlcore_reset_qos(struct iwl_priv *priv) spin_unlock_irqrestore(&priv->lock, flags); } -EXPORT_SYMBOL(iwlcore_reset_qos); +EXPORT_SYMBOL(iwl_reset_qos); + +#define MAX_BIT_RATE_40_MHZ 0x96 /* 150 Mbps */ +#define MAX_BIT_RATE_20_MHZ 0x48 /* 72 Mbps */ +static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, + struct ieee80211_ht_info *ht_info, + enum ieee80211_band band) +{ + u16 max_bit_rate = 0; + u8 rx_chains_num = priv->hw_params.rx_chains_num; + u8 tx_chains_num = priv->hw_params.tx_chains_num; + + ht_info->cap = 0; + memset(ht_info->supp_mcs_set, 0, 16); + + ht_info->ht_supported = 1; + + ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD; + ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20; + ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS & + (IWL_MIMO_PS_NONE << 2)); + + max_bit_rate = MAX_BIT_RATE_20_MHZ; + if (priv->hw_params.fat_channel & BIT(band)) { + ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH; + ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40; + ht_info->supp_mcs_set[4] = 0x01; + max_bit_rate = MAX_BIT_RATE_40_MHZ; + } + + if (priv->cfg->mod_params->amsdu_size_8K) + ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU; + + ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; + ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; + + ht_info->supp_mcs_set[0] = 0xFF; + if (rx_chains_num >= 2) + ht_info->supp_mcs_set[1] = 0xFF; + if (rx_chains_num >= 3) + ht_info->supp_mcs_set[2] = 0xFF; + + /* Highest supported Rx data rate */ + max_bit_rate *= rx_chains_num; + ht_info->supp_mcs_set[10] = (u8)(max_bit_rate & 0x00FF); + ht_info->supp_mcs_set[11] = (u8)((max_bit_rate & 0xFF00) >> 8); + + /* Tx MCS capabilities */ + ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED; + if (tx_chains_num != rx_chains_num) { + ht_info->supp_mcs_set[12] |= IEEE80211_HT_CAP_MCS_TX_RX_DIFF; + ht_info->supp_mcs_set[12] |= ((tx_chains_num - 1) << 2); + } +} + +static void iwlcore_init_hw_rates(struct iwl_priv *priv, + struct ieee80211_rate *rates) +{ + int i; + + for (i = 0; i < IWL_RATE_COUNT; i++) { + rates[i].bitrate = iwl_rates[i].ieee * 5; + rates[i].hw_value = i; /* Rate scaling will work on indexes */ + rates[i].hw_value_short = i; + rates[i].flags = 0; + if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) { + /* + * If CCK != 1M then set short preamble rate flag. + */ + rates[i].flags |= + (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ? + 0 : IEEE80211_RATE_SHORT_PREAMBLE; + } + } +} + +/** + * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom + */ +static int iwlcore_init_geos(struct iwl_priv *priv) +{ + struct iwl_channel_info *ch; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *channels; + struct ieee80211_channel *geo_ch; + struct ieee80211_rate *rates; + int i = 0; + + if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || + priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { + IWL_DEBUG_INFO("Geography modes already initialized.\n"); + set_bit(STATUS_GEO_CONFIGURED, &priv->status); + return 0; + } + + channels = kzalloc(sizeof(struct ieee80211_channel) * + priv->channel_count, GFP_KERNEL); + if (!channels) + return -ENOMEM; + + rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)), + GFP_KERNEL); + if (!rates) { + kfree(channels); + return -ENOMEM; + } + + /* 5.2GHz channels start after the 2.4GHz channels */ + sband = &priv->bands[IEEE80211_BAND_5GHZ]; + sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; + /* just OFDM */ + sband->bitrates = &rates[IWL_FIRST_OFDM_RATE]; + sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE; + + if (priv->cfg->sku & IWL_SKU_N) + iwlcore_init_ht_hw_capab(priv, &sband->ht_info, + IEEE80211_BAND_5GHZ); + + sband = &priv->bands[IEEE80211_BAND_2GHZ]; + sband->channels = channels; + /* OFDM & CCK */ + sband->bitrates = rates; + sband->n_bitrates = IWL_RATE_COUNT; + + if (priv->cfg->sku & IWL_SKU_N) + iwlcore_init_ht_hw_capab(priv, &sband->ht_info, + IEEE80211_BAND_2GHZ); + + priv->ieee_channels = channels; + priv->ieee_rates = rates; + + iwlcore_init_hw_rates(priv, rates); + + for (i = 0; i < priv->channel_count; i++) { + ch = &priv->channel_info[i]; + + /* FIXME: might be removed if scan is OK */ + if (!is_channel_valid(ch)) + continue; + + if (is_channel_a_band(ch)) + sband = &priv->bands[IEEE80211_BAND_5GHZ]; + else + sband = &priv->bands[IEEE80211_BAND_2GHZ]; + + geo_ch = &sband->channels[sband->n_channels++]; + + geo_ch->center_freq = + ieee80211_channel_to_frequency(ch->channel); + geo_ch->max_power = ch->max_power_avg; + geo_ch->max_antenna_gain = 0xff; + geo_ch->hw_value = ch->channel; + + if (is_channel_valid(ch)) { + if (!(ch->flags & EEPROM_CHANNEL_IBSS)) + geo_ch->flags |= IEEE80211_CHAN_NO_IBSS; + + if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) + geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + if (ch->flags & EEPROM_CHANNEL_RADAR) + geo_ch->flags |= IEEE80211_CHAN_RADAR; + + geo_ch->flags |= ch->fat_extension_channel; + + if (ch->max_power_avg > priv->tx_power_channel_lmt) + priv->tx_power_channel_lmt = ch->max_power_avg; + } else { + geo_ch->flags |= IEEE80211_CHAN_DISABLED; + } + + /* Save flags for reg domain usage */ + geo_ch->orig_flags = geo_ch->flags; + + IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n", + ch->channel, geo_ch->center_freq, + is_channel_a_band(ch) ? "5.2" : "2.4", + geo_ch->flags & IEEE80211_CHAN_DISABLED ? + "restricted" : "valid", + geo_ch->flags); + } + + if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && + priv->cfg->sku & IWL_SKU_A) { + printk(KERN_INFO DRV_NAME + ": Incorrectly detected BG card as ABG. Please send " + "your PCI ID 0x%04X:0x%04X to maintainer.\n", + priv->pci_dev->device, priv->pci_dev->subsystem_device); + priv->cfg->sku &= ~IWL_SKU_A; + } + + printk(KERN_INFO DRV_NAME + ": Tunable channels: %d 802.11bg, %d 802.11a channels\n", + priv->bands[IEEE80211_BAND_2GHZ].n_channels, + priv->bands[IEEE80211_BAND_5GHZ].n_channels); + + + set_bit(STATUS_GEO_CONFIGURED, &priv->status); + + return 0; +} + +/* + * iwlcore_free_geos - undo allocations in iwlcore_init_geos + */ +static void iwlcore_free_geos(struct iwl_priv *priv) +{ + kfree(priv->ieee_channels); + kfree(priv->ieee_rates); + clear_bit(STATUS_GEO_CONFIGURED, &priv->status); +} + +static bool is_single_rx_stream(struct iwl_priv *priv) +{ + return !priv->current_ht_config.is_ht || + ((priv->current_ht_config.supp_mcs_set[1] == 0) && + (priv->current_ht_config.supp_mcs_set[2] == 0)); +} + +static u8 iwl_is_channel_extension(struct iwl_priv *priv, + enum ieee80211_band band, + u16 channel, u8 extension_chan_offset) +{ + const struct iwl_channel_info *ch_info; + + ch_info = iwl_get_channel_info(priv, band, channel); + if (!is_channel_valid(ch_info)) + return 0; + + if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) + return !(ch_info->fat_extension_channel & + IEEE80211_CHAN_NO_FAT_ABOVE); + else if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) + return !(ch_info->fat_extension_channel & + IEEE80211_CHAN_NO_FAT_BELOW); + + return 0; +} + +u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv, + struct ieee80211_ht_info *sta_ht_inf) +{ + struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config; + + if ((!iwl_ht_conf->is_ht) || + (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) || + (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE)) + return 0; + + if (sta_ht_inf) { + if ((!sta_ht_inf->ht_supported) || + (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH))) + return 0; + } + + return iwl_is_channel_extension(priv, priv->band, + iwl_ht_conf->control_channel, + iwl_ht_conf->extension_chan_offset); +} +EXPORT_SYMBOL(iwl_is_fat_tx_allowed); + +void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) +{ + struct iwl_rxon_cmd *rxon = &priv->staging_rxon; + u32 val; + + if (!ht_info->is_ht) + return; + + /* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */ + if (iwl_is_fat_tx_allowed(priv, NULL)) + rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK; + else + rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | + RXON_FLG_CHANNEL_MODE_PURE_40_MSK); + + if (le16_to_cpu(rxon->channel) != ht_info->control_channel) { + IWL_DEBUG_ASSOC("control diff than current %d %d\n", + le16_to_cpu(rxon->channel), + ht_info->control_channel); + return; + } + + /* Note: control channel is opposite of extension channel */ + switch (ht_info->extension_chan_offset) { + case IEEE80211_HT_IE_CHA_SEC_ABOVE: + rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); + break; + case IEEE80211_HT_IE_CHA_SEC_BELOW: + rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; + break; + case IEEE80211_HT_IE_CHA_SEC_NONE: + default: + rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK; + break; + } + + val = ht_info->ht_protection; + + rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS); + + iwl_set_rxon_chain(priv); + + IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X " + "rxon flags 0x%X operation mode :0x%X " + "extension channel offset 0x%x " + "control chan %d\n", + ht_info->supp_mcs_set[0], + ht_info->supp_mcs_set[1], + ht_info->supp_mcs_set[2], + le32_to_cpu(rxon->flags), ht_info->ht_protection, + ht_info->extension_chan_offset, + ht_info->control_channel); + return; +} +EXPORT_SYMBOL(iwl_set_rxon_ht); + +/* + * Determine how many receiver/antenna chains to use. + * More provides better reception via diversity. Fewer saves power. + * MIMO (dual stream) requires at least 2, but works better with 3. + * This does not determine *which* chains to use, just how many. + */ +static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) +{ + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + + /* # of Rx chains to use when expecting MIMO. */ + if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) + return 2; + else + return 3; +} + +static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) +{ + int idle_cnt; + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + /* # Rx chains when idling and maybe trying to save power */ + switch (priv->ps_mode) { + case IWL_MIMO_PS_STATIC: + case IWL_MIMO_PS_DYNAMIC: + idle_cnt = (is_cam) ? 2 : 1; + break; + case IWL_MIMO_PS_NONE: + idle_cnt = (is_cam) ? active_cnt : 1; + break; + case IWL_MIMO_PS_INVALID: + default: + IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode); + WARN_ON(1); + idle_cnt = -1; + break; + } + return idle_cnt; +} + +/** + * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image + * + * Selects how many and which Rx receivers/antennas/chains to use. + * This should not be used for scan command ... it puts data in wrong place. + */ +void iwl_set_rxon_chain(struct iwl_priv *priv) +{ + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + u8 idle_rx_cnt, active_rx_cnt; + u16 rx_chain; + + /* Tell uCode which antennas are actually connected. + * Before first association, we assume all antennas are connected. + * Just after first association, iwl_chain_noise_calibration() + * checks which antennas actually *are* connected. */ + rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; + + /* How many receivers should we use? */ + active_rx_cnt = iwl_get_active_rx_chain_count(priv); + idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); + + /* correct rx chain count accoridng hw settings */ + if (priv->hw_params.rx_chains_num < active_rx_cnt) + active_rx_cnt = priv->hw_params.rx_chains_num; + + if (priv->hw_params.rx_chains_num < idle_rx_cnt) + idle_rx_cnt = priv->hw_params.rx_chains_num; + + rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; + rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; + + priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain); + + if (!is_single && (active_rx_cnt >= 2) && is_cam) + priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; + else + priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; + + IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n", + priv->staging_rxon.rx_chain, + active_rx_cnt, idle_rx_cnt); + + WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || + active_rx_cnt < idle_rx_cnt); +} +EXPORT_SYMBOL(iwl_set_rxon_chain); /** - * iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON + * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz * @channel: Any channel valid for the requested phymode @@ -188,10 +800,11 @@ EXPORT_SYMBOL(iwlcore_reset_qos); * NOTE: Does not commit to the hardware; it sets appropriate bit fields * in the staging RXON flag structure based on the phymode */ -int iwlcore_set_rxon_channel(struct iwl_priv *priv, - enum ieee80211_band band, - u16 channel) +int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch) { + enum ieee80211_band band = ch->band; + u16 channel = ieee80211_frequency_to_channel(ch->center_freq); + if (!iwl_get_channel_info(priv, band, channel)) { IWL_DEBUG_INFO("Could not set channel to %d [%d]\n", channel, band); @@ -214,68 +827,176 @@ int iwlcore_set_rxon_channel(struct iwl_priv *priv, return 0; } -EXPORT_SYMBOL(iwlcore_set_rxon_channel); +EXPORT_SYMBOL(iwl_set_rxon_channel); -static void iwlcore_init_hw(struct iwl_priv *priv) +int iwl_setup_mac(struct iwl_priv *priv) { + int ret; struct ieee80211_hw *hw = priv->hw; - hw->rate_control_algorithm = "iwl-4965-rs"; + hw->rate_control_algorithm = "iwl-agn-rs"; /* Tell mac80211 and its clients (e.g. Wireless Extensions) - * the range of signal quality values that we'll provide. + * the range of signal quality values that we'll provide. * Negative values for level/noise indicate that we'll provide dBm. * For WE, at least, non-0 values here *enable* display of values - * in app (iwconfig). */ + * in app (iwconfig). */ hw->max_rssi = -20; /* signal level, negative indicates dBm */ - hw->max_noise = -20; /* noise level, negative indicates dBm */ - hw->max_signal = 100; /* link quality indication (%) */ + hw->max_noise = -20; /* noise level, negative indicates dBm */ + hw->max_signal = 100; /* link quality indication (%) */ /* Tell mac80211 our Tx characteristics */ hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE; /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; -#ifdef CONFIG_IWL4965_HT - /* Enhanced value; more queues, to support 11n aggregation */ - hw->queues = 16; -#endif /* CONFIG_IWL4965_HT */ +#if 0 /* Not in RHEL5 */ + /* queues to support 11n aggregation */ + if (priv->cfg->sku & IWL_SKU_N) + hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues; +#endif + + hw->conf.beacon_int = 100; + + if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &priv->bands[IEEE80211_BAND_2GHZ]; + if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &priv->bands[IEEE80211_BAND_5GHZ]; + + ret = ieee80211_register_hw(priv->hw); + if (ret) { + IWL_ERROR("Failed to register hw (error %d)\n", ret); + return ret; + } + priv->mac80211_registered = 1; + + return 0; } +EXPORT_SYMBOL(iwl_setup_mac); -int iwl_setup(struct iwl_priv *priv) +int iwl_set_hw_params(struct iwl_priv *priv) { - int ret = 0; - iwlcore_init_hw(priv); - ret = priv->cfg->ops->lib->init_drv(priv); - return ret; + priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto; + priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; + priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; + if (priv->cfg->mod_params->amsdu_size_8K) + priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K; + else + priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K; + priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256; + + if (priv->cfg->mod_params->disable_11n) + priv->cfg->sku &= ~IWL_SKU_N; + + /* Device-specific setup */ + return priv->cfg->ops->lib->set_hw_params(priv); } -EXPORT_SYMBOL(iwl_setup); +EXPORT_SYMBOL(iwl_set_hw_params); -/* Low level driver call this function to update iwlcore with - * driver status. - */ -int iwlcore_low_level_notify(struct iwl_priv *priv, - enum iwlcore_card_notify notify) +int iwl_init_drv(struct iwl_priv *priv) { int ret; - switch (notify) { - case IWLCORE_INIT_EVT: - ret = iwl_rfkill_init(priv); - if (ret) - IWL_ERROR("Unable to initialize RFKILL system. " - "Ignoring error: %d\n", ret); - break; - case IWLCORE_START_EVT: - break; - case IWLCORE_STOP_EVT: - break; - case IWLCORE_REMOVE_EVT: - iwl_rfkill_unregister(priv); - break; + + priv->retry_rate = 1; + priv->ibss_beacon = NULL; + + spin_lock_init(&priv->lock); + spin_lock_init(&priv->power_data.lock); + spin_lock_init(&priv->sta_lock); + spin_lock_init(&priv->hcmd_lock); + spin_lock_init(&priv->lq_mngr.lock); + + INIT_LIST_HEAD(&priv->free_frames); + + mutex_init(&priv->mutex); + + /* Clear the driver's (not device's) station table */ + iwl_clear_stations_table(priv); + + priv->data_retry_limit = -1; + priv->ieee_channels = NULL; + priv->ieee_rates = NULL; + priv->band = IEEE80211_BAND_2GHZ; + + priv->iw_mode = IEEE80211_IF_TYPE_STA; + + priv->use_ant_b_for_management_frame = 1; /* start with ant B */ + priv->ps_mode = IWL_MIMO_PS_NONE; + + /* Choose which receivers/antennas to use */ + iwl_set_rxon_chain(priv); + iwl_init_scan_params(priv); + + if (priv->cfg->mod_params->enable_qos) + priv->qos_data.qos_enable = 1; + + iwl_reset_qos(priv); + + priv->qos_data.qos_active = 0; + priv->qos_data.qos_cap.val = 0; + + priv->rates_mask = IWL_RATES_MASK; + /* If power management is turned on, default to AC mode */ + priv->power_mode = IWL_POWER_AC; + priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX; + + ret = iwl_init_channel_map(priv); + if (ret) { + IWL_ERROR("initializing regulatory failed: %d\n", ret); + goto err; + } + + ret = iwlcore_init_geos(priv); + if (ret) { + IWL_ERROR("initializing geos failed: %d\n", ret); + goto err_free_channel_map; } return 0; + +err_free_channel_map: + iwl_free_channel_map(priv); +err: + return ret; +} +EXPORT_SYMBOL(iwl_init_drv); + +int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) +{ + int ret = 0; + if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) { + IWL_WARNING("Requested user TXPOWER %d below limit.\n", + priv->tx_power_user_lmt); + return -EINVAL; + } + + if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) { + IWL_WARNING("Requested user TXPOWER %d above limit.\n", + priv->tx_power_user_lmt); + return -EINVAL; + } + + if (priv->tx_power_user_lmt != tx_power) + force = true; + + priv->tx_power_user_lmt = tx_power; + + if (force && priv->cfg->ops->lib->send_tx_power) + ret = priv->cfg->ops->lib->send_tx_power(priv); + + return ret; } -EXPORT_SYMBOL(iwlcore_low_level_notify); +EXPORT_SYMBOL(iwl_set_tx_power); + +void iwl_uninit_drv(struct iwl_priv *priv) +{ + iwl_calib_free_results(priv); + iwlcore_free_geos(priv); + iwl_free_channel_map(priv); + kfree(priv->scan); +} +EXPORT_SYMBOL(iwl_uninit_drv); int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags) { @@ -290,3 +1011,440 @@ int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags) } EXPORT_SYMBOL(iwl_send_statistics_request); +/** + * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, + * using sample data 100 bytes apart. If these sample points are good, + * it's a pretty good bet that everything between them is good, too. + */ +static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) +{ + u32 val; + int ret = 0; + u32 errcnt = 0; + u32 i; + + IWL_DEBUG_INFO("ucode inst image size is %u\n", len); + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IWL_DL_IO is set */ + iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, + i + RTC_INST_LOWER_BOUND); + val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + ret = -EIO; + errcnt++; + if (errcnt >= 3) + break; + } + } + + iwl_release_nic_access(priv); + + return ret; +} + +/** + * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host, + * looking at all data. + */ +static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image, + u32 len) +{ + u32 val; + u32 save_len = len; + int ret = 0; + u32 errcnt; + + IWL_DEBUG_INFO("ucode inst image size is %u\n", len); + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND); + + errcnt = 0; + for (; len > 0; len -= sizeof(u32), image++) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IWL_DL_IO is set */ + val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + IWL_ERROR("uCode INST section is invalid at " + "offset 0x%x, is 0x%x, s/b 0x%x\n", + save_len - len, val, le32_to_cpu(*image)); + ret = -EIO; + errcnt++; + if (errcnt >= 20) + break; + } + } + + iwl_release_nic_access(priv); + + if (!errcnt) + IWL_DEBUG_INFO + ("ucode image in INSTRUCTION memory is good\n"); + + return ret; +} + +/** + * iwl_verify_ucode - determine which instruction image is in SRAM, + * and verify its contents + */ +int iwl_verify_ucode(struct iwl_priv *priv) +{ + __le32 *image; + u32 len; + int ret; + + /* Try bootstrap */ + image = (__le32 *)priv->ucode_boot.v_addr; + len = priv->ucode_boot.len; + ret = iwlcore_verify_inst_sparse(priv, image, len); + if (!ret) { + IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n"); + return 0; + } + + /* Try initialize */ + image = (__le32 *)priv->ucode_init.v_addr; + len = priv->ucode_init.len; + ret = iwlcore_verify_inst_sparse(priv, image, len); + if (!ret) { + IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n"); + return 0; + } + + /* Try runtime/protocol */ + image = (__le32 *)priv->ucode_code.v_addr; + len = priv->ucode_code.len; + ret = iwlcore_verify_inst_sparse(priv, image, len); + if (!ret) { + IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n"); + return 0; + } + + IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); + + /* Since nothing seems to match, show first several data entries in + * instruction SRAM, so maybe visual inspection will give a clue. + * Selection of bootstrap image (vs. other images) is arbitrary. */ + image = (__le32 *)priv->ucode_boot.v_addr; + len = priv->ucode_boot.len; + ret = iwl_verify_inst_full(priv, image, len); + + return ret; +} +EXPORT_SYMBOL(iwl_verify_ucode); + + +static const char *desc_lookup(int i) +{ + switch (i) { + case 1: + return "FAIL"; + case 2: + return "BAD_PARAM"; + case 3: + return "BAD_CHECKSUM"; + case 4: + return "NMI_INTERRUPT"; + case 5: + return "SYSASSERT"; + case 6: + return "FATAL_ERROR"; + } + + return "UNKNOWN"; +} + +#define ERROR_START_OFFSET (1 * sizeof(u32)) +#define ERROR_ELEM_SIZE (7 * sizeof(u32)) + +void iwl_dump_nic_error_log(struct iwl_priv *priv) +{ + u32 data2, line; + u32 desc, time, count, base, data1; + u32 blink1, blink2, ilink1, ilink2; + int ret; + + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.error_event_table_ptr); + + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { + IWL_ERROR("Not valid error log pointer 0x%08X\n", base); + return; + } + + ret = iwl_grab_nic_access(priv); + if (ret) { + IWL_WARNING("Can not read from adapter at this time.\n"); + return; + } + + count = iwl_read_targ_mem(priv, base); + + if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { + IWL_ERROR("Start IWL Error Log Dump:\n"); + IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count); + } + + desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32)); + blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32)); + blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32)); + ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32)); + ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32)); + data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32)); + data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32)); + line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32)); + time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32)); + + IWL_ERROR("Desc Time " + "data1 data2 line\n"); + IWL_ERROR("%-13s (#%d) %010u 0x%08X 0x%08X %u\n", + desc_lookup(desc), desc, time, data1, data2, line); + IWL_ERROR("blink1 blink2 ilink1 ilink2\n"); + IWL_ERROR("0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2, + ilink1, ilink2); + + iwl_release_nic_access(priv); +} +EXPORT_SYMBOL(iwl_dump_nic_error_log); + +#define EVENT_START_OFFSET (4 * sizeof(u32)) + +/** + * iwl_print_event_log - Dump error event log to syslog + * + * NOTE: Must be called with iwl4965_grab_nic_access() already obtained! + */ +void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, + u32 num_events, u32 mode) +{ + u32 i; + u32 base; /* SRAM byte address of event log header */ + u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ + u32 ptr; /* SRAM byte address of log data */ + u32 ev, time, data; /* event log data */ + + if (num_events == 0) + return; + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + + if (mode == 0) + event_size = 2 * sizeof(u32); + else + event_size = 3 * sizeof(u32); + + ptr = base + EVENT_START_OFFSET + (start_idx * event_size); + + /* "time" is actually "data" for mode 0 (no timestamp). + * place event id # at far right for easier visual parsing. */ + for (i = 0; i < num_events; i++) { + ev = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + time = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + if (mode == 0) { + /* data, ev */ + IWL_ERROR("EVT_LOG:0x%08x:%04u\n", time, ev); + } else { + data = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + IWL_ERROR("EVT_LOGT:%010u:0x%08x:%04u\n", + time, data, ev); + } + } +} +EXPORT_SYMBOL(iwl_print_event_log); + + +void iwl_dump_nic_event_log(struct iwl_priv *priv) +{ + int ret; + u32 base; /* SRAM byte address of event log header */ + u32 capacity; /* event log capacity in # entries */ + u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ + u32 num_wraps; /* # times uCode wrapped to top of log */ + u32 next_entry; /* index of next entry to be written by uCode */ + u32 size; /* # entries that we'll print */ + + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { + IWL_ERROR("Invalid event log pointer 0x%08X\n", base); + return; + } + + ret = iwl_grab_nic_access(priv); + if (ret) { + IWL_WARNING("Can not read from adapter at this time.\n"); + return; + } + + /* event log header */ + capacity = iwl_read_targ_mem(priv, base); + mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); + num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); + next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); + + size = num_wraps ? capacity : next_entry; + + /* bail out if nothing in log */ + if (size == 0) { + IWL_ERROR("Start IWL Event Log Dump: nothing in log\n"); + iwl_release_nic_access(priv); + return; + } + + IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n", + size, num_wraps); + + /* if uCode has wrapped back to top of log, start at the oldest entry, + * i.e the next one that uCode would fill. */ + if (num_wraps) + iwl_print_event_log(priv, next_entry, + capacity - next_entry, mode); + /* (then/else) start at top of log */ + iwl_print_event_log(priv, 0, next_entry, mode); + + iwl_release_nic_access(priv); +} +EXPORT_SYMBOL(iwl_dump_nic_event_log); + +void iwl_rf_kill_ct_config(struct iwl_priv *priv) +{ + struct iwl_ct_kill_config cmd; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&priv->lock, flags); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + spin_unlock_irqrestore(&priv->lock, flags); + + cmd.critical_temperature_R = + cpu_to_le32(priv->hw_params.ct_kill_threshold); + + ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, + sizeof(cmd), &cmd); + if (ret) + IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n"); + else + IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, " + "critical temperature is %d\n", + cmd.critical_temperature_R); +} +EXPORT_SYMBOL(iwl_rf_kill_ct_config); + +/* + * CARD_STATE_CMD + * + * Use: Sets the device's internal card state to enable, disable, or halt + * + * When in the 'enable' state the card operates as normal. + * When in the 'disable' state, the card enters into a low power mode. + * When in the 'halt' state, the card is shut down and must be fully + * restarted to come back on. + */ +static int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag) +{ + struct iwl_host_cmd cmd = { + .id = REPLY_CARD_STATE_CMD, + .len = sizeof(u32), + .data = &flags, + .meta.flags = meta_flag, + }; + + return iwl_send_cmd(priv, &cmd); +} + +void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv) +{ + unsigned long flags; + + if (test_bit(STATUS_RF_KILL_SW, &priv->status)) + return; + + IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO OFF\n"); + + iwl_scan_cancel(priv); + /* FIXME: This is a workaround for AP */ + if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { + spin_lock_irqsave(&priv->lock, flags); + iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_SW_BIT_RFKILL); + spin_unlock_irqrestore(&priv->lock, flags); + /* call the host command only if no hw rf-kill set */ + if (!test_bit(STATUS_RF_KILL_HW, &priv->status) && + iwl_is_ready(priv)) + iwl_send_card_state(priv, + CARD_STATE_CMD_DISABLE, 0); + set_bit(STATUS_RF_KILL_SW, &priv->status); + /* make sure mac80211 stop sending Tx frame */ + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + } +} +EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio); + +int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv) +{ + unsigned long flags; + + if (!test_bit(STATUS_RF_KILL_SW, &priv->status)) + return 0; + + IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO ON\n"); + + spin_lock_irqsave(&priv->lock, flags); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + + /* If the driver is up it will receive CARD_STATE_NOTIFICATION + * notification where it will clear SW rfkill status. + * Setting it here would break the handler. Only if the + * interface is down we can set here since we don't + * receive any further notification. + */ + if (!priv->is_open) + clear_bit(STATUS_RF_KILL_SW, &priv->status); + spin_unlock_irqrestore(&priv->lock, flags); + + /* wake up ucode */ + msleep(10); + + spin_lock_irqsave(&priv->lock, flags); + iwl_read32(priv, CSR_UCODE_DRV_GP1); + if (!iwl_grab_nic_access(priv)) + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + if (test_bit(STATUS_RF_KILL_HW, &priv->status)) { + IWL_DEBUG_RF_KILL("Can not turn radio back on - " + "disabled by HW switch\n"); + return 0; + } + + /* If the driver is already loaded, it will receive + * CARD_STATE_NOTIFICATION notifications and the handler will + * call restart to reload the driver. + */ + return 1; +} +EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 7193d97..fa62ee9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -70,7 +70,7 @@ struct iwl_host_cmd; struct iwl_cmd; -#define IWLWIFI_VERSION "1.2.26k" +#define IWLWIFI_VERSION "1.3.27k" #define DRV_COPYRIGHT "Copyright(c) 2003-2008 Intel Corporation" #define IWL_PCI_DEVICE(dev, subdev, cfg) \ @@ -86,28 +86,64 @@ struct iwl_hcmd_ops { int (*rxon_assoc)(struct iwl_priv *priv); }; struct iwl_hcmd_utils_ops { - int (*enqueue_hcmd)(struct iwl_priv *priv, struct iwl_host_cmd *cmd); + u16 (*get_hcmd_size)(u8 cmd_id, u16 len); + u16 (*build_addsta_hcmd)(const struct iwl_addsta_cmd *cmd, u8 *data); + void (*gain_computation)(struct iwl_priv *priv, + u32 *average_noise, + u16 min_average_noise_antennat_i, + u32 min_average_noise); + void (*chain_noise_reset)(struct iwl_priv *priv); + void (*rts_tx_cmd_flag)(struct ieee80211_tx_control *ctrl, + __le32 *tx_flags); + int (*calc_rssi)(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp); }; struct iwl_lib_ops { - /* iwlwifi driver (priv) init */ - int (*init_drv)(struct iwl_priv *priv); /* set hw dependant perameters */ int (*set_hw_params)(struct iwl_priv *priv); - + /* ucode shared memory */ + int (*alloc_shared_mem)(struct iwl_priv *priv); + void (*free_shared_mem)(struct iwl_priv *priv); + int (*shared_mem_rx_idx)(struct iwl_priv *priv); + /* Handling TX */ void (*txq_update_byte_cnt_tbl)(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq, + struct iwl_tx_queue *txq, u16 byte_cnt); - /* nic init */ - int (*hw_nic_init)(struct iwl_priv *priv); + void (*txq_inval_byte_cnt_tbl)(struct iwl_priv *priv, + struct iwl_tx_queue *txq); + void (*txq_set_sched)(struct iwl_priv *priv, u32 mask); + /* aggregations */ + int (*txq_agg_enable)(struct iwl_priv *priv, int txq_id, int tx_fifo, + int sta_id, int tid, u16 ssn_idx); + int (*txq_agg_disable)(struct iwl_priv *priv, u16 txq_id, u16 ssn_idx, + u8 tx_fifo); + /* setup Rx handler */ + void (*rx_handler_setup)(struct iwl_priv *priv); + /* setup deferred work */ + void (*setup_deferred_work)(struct iwl_priv *priv); + /* cancel deferred work */ + void (*cancel_deferred_work)(struct iwl_priv *priv); + /* alive notification after init uCode load */ + void (*init_alive_start)(struct iwl_priv *priv); /* alive notification */ int (*alive_notify)(struct iwl_priv *priv); /* check validity of rtc data address */ int (*is_valid_rtc_data_addr)(u32 addr); /* 1st ucode load */ int (*load_ucode)(struct iwl_priv *priv); - /* rfkill */ - void (*radio_kill_sw)(struct iwl_priv *priv, int disable_radio); + /* power management */ + struct { + int (*init)(struct iwl_priv *priv); + int (*reset)(struct iwl_priv *priv); + void (*stop)(struct iwl_priv *priv); + void (*config)(struct iwl_priv *priv); + int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src); + } apm_ops; + /* power */ + int (*send_tx_power) (struct iwl_priv *priv); + void (*update_chain_flags)(struct iwl_priv *priv); + void (*temperature) (struct iwl_priv *priv); /* eeprom operations (as defined in iwl-eeprom.h) */ struct iwl_eeprom_ops eeprom_ops; }; @@ -124,15 +160,19 @@ struct iwl_mod_params { int debug; /* def: 0 = minimal debug log messages */ int disable_hw_scan; /* def: 0 = use h/w scan */ int num_of_queues; /* def: HW dependent */ + int num_of_ampdu_queues;/* def: HW dependent */ int enable_qos; /* def: 1 = use quality of service */ + int disable_11n; /* def: 0 = disable 11n capabilities */ int amsdu_size_8K; /* def: 1 = enable 8K amsdu size */ int antenna; /* def: 0 = both antennas (use diversity) */ + int restart_fw; /* def: 1 = restart firmware */ }; struct iwl_cfg { const char *name; const char *fw_name; unsigned int sku; + int eeprom_size; const struct iwl_ops *ops; const struct iwl_mod_params *mod_params; }; @@ -143,14 +183,118 @@ struct iwl_cfg { struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, struct ieee80211_ops *hw_ops); +void iwl_hw_detect(struct iwl_priv *priv); + +void iwl_clear_stations_table(struct iwl_priv *priv); +void iwl_reset_qos(struct iwl_priv *priv); +void iwl_set_rxon_chain(struct iwl_priv *priv); +int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch); +void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info); +u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv, + struct ieee80211_ht_info *sta_ht_inf); +int iwl_hw_nic_init(struct iwl_priv *priv); +int iwl_setup_mac(struct iwl_priv *priv); +int iwl_set_hw_params(struct iwl_priv *priv); +int iwl_init_drv(struct iwl_priv *priv); +void iwl_uninit_drv(struct iwl_priv *priv); +/* "keep warm" functions */ +int iwl_kw_init(struct iwl_priv *priv); +int iwl_kw_alloc(struct iwl_priv *priv); +void iwl_kw_free(struct iwl_priv *priv); + +/***************************************************** +* RX +******************************************************/ +void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq); +int iwl_rx_queue_alloc(struct iwl_priv *priv); +void iwl_rx_handle(struct iwl_priv *priv); +int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, + struct iwl_rx_queue *q); +void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq); +void iwl_rx_replenish(struct iwl_priv *priv); +int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq); +int iwl_rx_agg_start(struct iwl_priv *priv, const u8 *addr, int tid, u16 ssn); +int iwl_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid); +/* FIXME: remove when TX is moved to iwl core */ +int iwl_rx_queue_restock(struct iwl_priv *priv); +int iwl_rx_queue_space(const struct iwl_rx_queue *q); +void iwl_rx_allocate(struct iwl_priv *priv); +void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb); +int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index); +/* Handlers */ +void iwl_rx_missed_beacon_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb); +void iwl_rx_statistics(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb); + +/* TX helpers */ + +/***************************************************** +* TX +******************************************************/ +int iwl_txq_ctx_reset(struct iwl_priv *priv); +int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb, + struct ieee80211_tx_control *ctl); +/* FIXME: remove when free Tx is fully merged into iwlcore */ +int iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq); +void iwl_hw_txq_ctx_free(struct iwl_priv *priv); +int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *tfd, + dma_addr_t addr, u16 len); +int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq); +int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn); +int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid); +int iwl_txq_check_empty(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id); + +/***************************************************** + * TX power + ****************************************************/ +int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force); + +/***************************************************** + * RF -Kill - here and not in iwl-rfkill.h to be available when + * RF-kill subsystem is not compiled. + ****************************************************/ +void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv); +int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv); -void iwlcore_clear_stations_table(struct iwl_priv *priv); -void iwlcore_reset_qos(struct iwl_priv *priv); -int iwlcore_set_rxon_channel(struct iwl_priv *priv, - enum ieee80211_band band, - u16 channel); +/******************************************************************************* + * Rate + ******************************************************************************/ + +void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, + struct ieee80211_tx_control *ctrl); +int iwl_hwrate_to_plcp_idx(u32 rate_n_flags); + +static inline u8 iwl_hw_get_rate(__le32 rate_n_flags) +{ + return le32_to_cpu(rate_n_flags) & 0xFF; +} +static inline u32 iwl_hw_get_rate_n_flags(__le32 rate_n_flags) +{ + return le32_to_cpu(rate_n_flags) & 0x1FFFF; +} +static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags) +{ + return cpu_to_le32(flags|(u32)rate); +} -int iwl_setup(struct iwl_priv *priv); +/******************************************************************************* + * Scanning + ******************************************************************************/ +void iwl_init_scan_params(struct iwl_priv *priv); +int iwl_scan_cancel(struct iwl_priv *priv); +int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms); +const char *iwl_escape_essid(const char *essid, u8 essid_len); +int iwl_scan_initiate(struct iwl_priv *priv); +void iwl_setup_rx_scan_handlers(struct iwl_priv *priv); +void iwl_setup_scan_deferred_work(struct iwl_priv *priv); + +/******************************************************************************* + * Calibrations - implemented in iwl-calib.c + ******************************************************************************/ +int iwl_send_calib_results(struct iwl_priv *priv); +int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len); +void iwl_calib_free_results(struct iwl_priv *priv); /***************************************************** * S e n d i n g H o s t C o m m a n d s * @@ -167,6 +311,17 @@ int iwl_send_cmd_pdu_async(struct iwl_priv *priv, u8 id, u16 len, int (*callback)(struct iwl_priv *priv, struct iwl_cmd *cmd, struct sk_buff *skb)); + +int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd); + +/***************************************************** +* Error Handling Debugging +******************************************************/ +void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, + u32 num_events, u32 mode); +void iwl_dump_nic_error_log(struct iwl_priv *priv); +void iwl_dump_nic_event_log(struct iwl_priv *priv); + /*************** DRIVER STATUS FUNCTIONS *****/ #define STATUS_HCMD_ACTIVE 0 /* host command in progress */ @@ -188,6 +343,7 @@ int iwl_send_cmd_pdu_async(struct iwl_priv *priv, u8 id, u16 len, #define STATUS_POWER_PMI 16 #define STATUS_FW_ERROR 17 #define STATUS_CONF_PENDING 18 +#define STATUS_MODE_PENDING 19 static inline int iwl_is_ready(struct iwl_priv *priv) @@ -209,10 +365,19 @@ static inline int iwl_is_init(struct iwl_priv *priv) return test_bit(STATUS_INIT, &priv->status); } +static inline int iwl_is_rfkill_sw(struct iwl_priv *priv) +{ + return test_bit(STATUS_RF_KILL_SW, &priv->status); +} + +static inline int iwl_is_rfkill_hw(struct iwl_priv *priv) +{ + return test_bit(STATUS_RF_KILL_HW, &priv->status); +} + static inline int iwl_is_rfkill(struct iwl_priv *priv) { - return test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status); + return iwl_is_rfkill_hw(priv) || iwl_is_rfkill_sw(priv); } static inline int iwl_is_ready_rf(struct iwl_priv *priv) @@ -224,23 +389,27 @@ static inline int iwl_is_ready_rf(struct iwl_priv *priv) return iwl_is_ready(priv); } - -enum iwlcore_card_notify { - IWLCORE_INIT_EVT = 0, - IWLCORE_START_EVT = 1, - IWLCORE_STOP_EVT = 2, - IWLCORE_REMOVE_EVT = 3, -}; - -int iwlcore_low_level_notify(struct iwl_priv *priv, - enum iwlcore_card_notify notify); +extern void iwl_rf_kill_ct_config(struct iwl_priv *priv); extern int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags); -int iwl_send_lq_cmd(struct iwl_priv *priv, - struct iwl_link_quality_cmd *lq, u8 flags); +extern int iwl_verify_ucode(struct iwl_priv *priv); +extern int iwl_send_lq_cmd(struct iwl_priv *priv, + struct iwl_link_quality_cmd *lq, u8 flags); +extern void iwl_rx_reply_rx(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb); +extern void iwl_rx_reply_rx_phy(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb); +void iwl_rx_reply_compressed_ba(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb); static inline int iwl_send_rxon_assoc(struct iwl_priv *priv) { return priv->cfg->ops->hcmd->rxon_assoc(priv); } +static inline const struct ieee80211_supported_band *iwl_get_hw_mode( + struct iwl_priv *priv, enum ieee80211_band band) +{ + return priv->hw->wiphy->bands[band]; +} + #endif /* __iwl_core_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 1272579..52629fb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -87,16 +87,16 @@ /* EEPROM reads */ #define CSR_EEPROM_REG (CSR_BASE+0x02c) #define CSR_EEPROM_GP (CSR_BASE+0x030) +#define CSR_GIO_REG (CSR_BASE+0x03C) #define CSR_GP_UCODE (CSR_BASE+0x044) #define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054) #define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058) #define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c) #define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060) -#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) #define CSR_LED_REG (CSR_BASE+0x094) +#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) -/* Analog phase-lock-loop configuration (3945 only) - * Set bit 24. */ +/* Analog phase-lock-loop configuration */ #define CSR_ANA_PLL_CFG (CSR_BASE+0x20c) /* * Indicates hardware rev, to determine CCK backoff for txpower calculation. @@ -104,12 +104,13 @@ * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step */ #define CSR_HW_REV_WA_REG (CSR_BASE+0x22C) +#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240) /* Bits for CSR_HW_IF_CONFIG_REG */ #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010) -#define CSR49_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) -#define CSR49_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) -#define CSR49_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) +#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) +#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) +#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100) #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200) @@ -118,7 +119,12 @@ #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000) #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000) -#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) +#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) +#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) +#define CSR_HW_IF_CONFIG_REG_BIT_PCI_OWN_SEM (0x00400000) +#define CSR_HW_IF_CONFIG_REG_BIT_ME_OWN (0x02000000) +#define CSR_HW_IF_CONFIG_REG_BIT_WAKE_ME (0x08000000) + /* interrupt flags in INTA, set by uCode or hardware (e.g. dma), * acknowledged (reset) by host writing "1" to flagged bits. */ @@ -170,6 +176,10 @@ #define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \ CSR_FH_INT_BIT_TX_CHNL0) +/* GPIO */ +#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) +#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) +#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200) /* RESET */ #define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) @@ -191,6 +201,16 @@ #define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) +/* HW REV */ +#define CSR_HW_REV_TYPE_MSK (0x00000F0) +#define CSR_HW_REV_TYPE_3945 (0x00000D0) +#define CSR_HW_REV_TYPE_4965 (0x0000000) +#define CSR_HW_REV_TYPE_5300 (0x0000020) +#define CSR_HW_REV_TYPE_5350 (0x0000030) +#define CSR_HW_REV_TYPE_5100 (0x0000050) +#define CSR_HW_REV_TYPE_5150 (0x0000040) +#define CSR_HW_REV_TYPE_NONE (0x00000F0) + /* EEPROM REG */ #define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) #define CSR_EEPROM_REG_BIT_CMD (0x00000002) @@ -200,17 +220,15 @@ #define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000) #define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) +/* CSR GIO */ +#define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002) + /* UCODE DRV GP */ #define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001) #define CSR_UCODE_SW_BIT_RFKILL (0x00000002) #define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) #define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) -/* GPIO */ -#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) -#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) -#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC CSR_GPIO_IN_BIT_AUX_POWER - /* GI Chicken Bits */ #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) @@ -220,6 +238,12 @@ #define CSR_LED_REG_TRUN_ON (0x78) #define CSR_LED_REG_TRUN_OFF (0x38) +/* ANA_PLL */ +#define CSR39_ANA_PLL_CFG_VAL (0x01000000) +#define CSR50_ANA_PLL_CFG_VAL (0x00880300) + +/* HPET MEM debug */ +#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) /*=== HBUS (Host-side Bus) ===*/ #define HBUS_BASE (0x400) /* diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index c60724c..d2daa17 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -30,37 +30,35 @@ #define __iwl_debug_h__ #ifdef CONFIG_IWLWIFI_DEBUG -extern u32 iwl_debug_level; #define IWL_DEBUG(level, fmt, args...) \ -do { if (iwl_debug_level & (level)) \ - printk(KERN_ERR DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) +do { if (priv->debug_level & (level)) \ + dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \ + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #define IWL_DEBUG_LIMIT(level, fmt, args...) \ -do { if ((iwl_debug_level & (level)) && net_ratelimit()) \ - printk(KERN_ERR DRV_NAME": %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) - -static inline void iwl_print_hex_dump(int level, void *p, u32 len) -{ - if (!(iwl_debug_level & level)) - return; - - print_hex_dump(KERN_DEBUG, "iwl data: ", DUMP_PREFIX_OFFSET, 16, 1, - p, len, 1); -} +do { if ((priv->debug_level & (level)) && net_ratelimit()) \ + dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \ + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #ifdef CONFIG_IWLWIFI_DEBUGFS struct iwl_debugfs { const char *name; struct dentry *dir_drv; struct dentry *dir_data; - struct dir_data_files{ + struct dentry *dir_rf; + struct dir_data_files { struct dentry *file_sram; + struct dentry *file_eeprom; struct dentry *file_stations; struct dentry *file_rx_statistics; struct dentry *file_tx_statistics; + struct dentry *file_log_event; } dbgfs_data_files; + struct dir_rf_files { + struct dentry *file_disable_sensitivity; + struct dentry *file_disable_chain_noise; + struct dentry *file_disable_tx_power; + } dbgfs_rf_files; u32 sram_offset; u32 sram_len; }; @@ -70,15 +68,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv); #endif #else -static inline void IWL_DEBUG(int level, const char *fmt, ...) -{ -} -static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...) -{ -} -static inline void iwl_print_hex_dump(int level, void *p, u32 len) -{ -} +#define IWL_DEBUG(level, fmt, args...) +#define IWL_DEBUG_LIMIT(level, fmt, args...) #endif /* CONFIG_IWLWIFI_DEBUG */ @@ -123,7 +114,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv) #define IWL_DL_MAC80211 (1 << 1) #define IWL_DL_HOST_COMMAND (1 << 2) #define IWL_DL_STATE (1 << 3) - +#define IWL_DL_MACDUMP (1 << 4) #define IWL_DL_RADIO (1 << 7) #define IWL_DL_POWER (1 << 8) #define IWL_DL_TEMP (1 << 9) @@ -163,6 +154,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv) #define IWL_DEBUG_INFO(f, a...) IWL_DEBUG(IWL_DL_INFO, f, ## a) #define IWL_DEBUG_MAC80211(f, a...) IWL_DEBUG(IWL_DL_MAC80211, f, ## a) +#define IWL_DEBUG_MACDUMP(f, a...) IWL_DEBUG(IWL_DL_MACDUMP, f, ## a) #define IWL_DEBUG_TEMP(f, a...) IWL_DEBUG(IWL_DL_TEMP, f, ## a) #define IWL_DEBUG_SCAN(f, a...) IWL_DEBUG(IWL_DL_SCAN, f, ## a) #define IWL_DEBUG_RX(f, a...) IWL_DEBUG(IWL_DL_RX, f, ## a) diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index 9a30e1d..20db0eb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -34,7 +34,7 @@ #include <net/mac80211.h> -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-debug.h" #include "iwl-core.h" #include "iwl-io.h" @@ -55,6 +55,13 @@ goto err; \ } while (0) +#define DEBUGFS_ADD_BOOL(name, parent, ptr) do { \ + dbgfs->dbgfs_##parent##_files.file_##name = \ + debugfs_create_bool(#name, 0644, dbgfs->dir_##parent, ptr); \ + if (IS_ERR(dbgfs->dbgfs_##parent##_files.file_##name)) \ + goto err; \ +} while (0) + #define DEBUGFS_REMOVE(name) do { \ debugfs_remove(name); \ name = NULL; \ @@ -85,6 +92,14 @@ static const struct file_operations iwl_dbgfs_##name##_ops = { \ .open = iwl_dbgfs_open_file_generic, \ }; +#define DEBUGFS_WRITE_FILE_OPS(name) \ + DEBUGFS_WRITE_FUNC(name); \ +static const struct file_operations iwl_dbgfs_##name##_ops = { \ + .write = iwl_dbgfs_##name##_write, \ + .open = iwl_dbgfs_open_file_generic, \ +}; + + #define DEBUGFS_READ_WRITE_FILE_OPS(name) \ DEBUGFS_READ_FUNC(name); \ DEBUGFS_WRITE_FUNC(name); \ @@ -206,7 +221,7 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { struct iwl_priv *priv = (struct iwl_priv *)file->private_data; - struct iwl4965_station_entry *station; + struct iwl_station_entry *station; int max_sta = priv->hw_params.max_stations; char *buf; int i, j, pos = 0; @@ -216,7 +231,7 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, DECLARE_MAC_BUF(mac); buf = kmalloc(bufsz, GFP_KERNEL); - if(!buf) + if (!buf) return -ENOMEM; pos += scnprintf(buf + pos, bufsz - pos, "num of stations: %d\n\n", @@ -240,21 +255,18 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, pos += scnprintf(buf + pos, bufsz - pos, "tid data:\n"); pos += scnprintf(buf + pos, bufsz - pos, "seq_num\t\ttxq_id"); -#ifdef CONFIG_IWL4965_HT pos += scnprintf(buf + pos, bufsz - pos, "\tframe_count\twait_for_ba\t"); pos += scnprintf(buf + pos, bufsz - pos, "start_idx\tbitmap0\t"); pos += scnprintf(buf + pos, bufsz - pos, "bitmap1\trate_n_flags"); -#endif pos += scnprintf(buf + pos, bufsz - pos, "\n"); for (j = 0; j < MAX_TID_COUNT; j++) { pos += scnprintf(buf + pos, bufsz - pos, "[%d]:\t\t%u", j, station->tid[j].seq_number); -#ifdef CONFIG_IWL4965_HT pos += scnprintf(buf + pos, bufsz - pos, "\t%u\t\t%u\t\t%u\t\t", station->tid[j].agg.txq_id, @@ -265,7 +277,6 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, station->tid[j].agg.start_idx, (unsigned long long)station->tid[j].agg.bitmap, station->tid[j].agg.rate_n_flags); -#endif pos += scnprintf(buf + pos, bufsz - pos, "\n"); } pos += scnprintf(buf + pos, bufsz - pos, "\n"); @@ -277,8 +288,70 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, return ret; } +static ssize_t iwl_dbgfs_eeprom_read(struct file *file, + char __user *user_buf, + size_t count, + loff_t *ppos) +{ + ssize_t ret; + struct iwl_priv *priv = (struct iwl_priv *)file->private_data; + int pos = 0, ofs = 0, buf_size = 0; + const u8 *ptr; + char *buf; + size_t eeprom_len = priv->cfg->eeprom_size; + buf_size = 4 * eeprom_len + 256; + + if (eeprom_len % 16) { + IWL_ERROR("EEPROM size is not multiple of 16.\n"); + return -ENODATA; + } + + /* 4 characters for byte 0xYY */ + buf = kzalloc(buf_size, GFP_KERNEL); + if (!buf) { + IWL_ERROR("Can not allocate Buffer\n"); + return -ENOMEM; + } + + ptr = priv->eeprom; + for (ofs = 0 ; ofs < eeprom_len ; ofs += 16) { + pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs); + hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos, + buf_size - pos, 0); + pos += strlen(buf); + if (buf_size - pos > 0) + buf[pos++] = '\n'; + } + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +static ssize_t iwl_dbgfs_log_event_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + u32 event_log_flag; + char buf[8]; + int buf_size; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + if (sscanf(buf, "%d", &event_log_flag) != 1) + return -EFAULT; + if (event_log_flag == 1) + iwl_dump_nic_event_log(priv); + + return count; +} DEBUGFS_READ_WRITE_FILE_OPS(sram); +DEBUGFS_WRITE_FILE_OPS(log_event); +DEBUGFS_READ_FILE_OPS(eeprom); DEBUGFS_READ_FILE_OPS(stations); DEBUGFS_READ_FILE_OPS(rx_statistics); DEBUGFS_READ_FILE_OPS(tx_statistics); @@ -290,31 +363,41 @@ DEBUGFS_READ_FILE_OPS(tx_statistics); int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) { struct iwl_debugfs *dbgfs; + struct dentry *phyd = priv->hw->wiphy->debugfsdir; + int ret = 0; dbgfs = kzalloc(sizeof(struct iwl_debugfs), GFP_KERNEL); if (!dbgfs) { + ret = -ENOMEM; goto err; } priv->dbgfs = dbgfs; dbgfs->name = name; - dbgfs->dir_drv = debugfs_create_dir(name, NULL); - if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)){ + dbgfs->dir_drv = debugfs_create_dir(name, phyd); + if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)) { + ret = -ENOENT; goto err; } DEBUGFS_ADD_DIR(data, dbgfs->dir_drv); + DEBUGFS_ADD_DIR(rf, dbgfs->dir_drv); + DEBUGFS_ADD_FILE(eeprom, data); DEBUGFS_ADD_FILE(sram, data); + DEBUGFS_ADD_FILE(log_event, data); DEBUGFS_ADD_FILE(stations, data); DEBUGFS_ADD_FILE(rx_statistics, data); DEBUGFS_ADD_FILE(tx_statistics, data); - + DEBUGFS_ADD_BOOL(disable_sensitivity, rf, &priv->disable_sens_cal); + DEBUGFS_ADD_BOOL(disable_chain_noise, rf, + &priv->disable_chain_noise_cal); + DEBUGFS_ADD_BOOL(disable_tx_power, rf, &priv->disable_tx_power_cal); return 0; err: IWL_ERROR("Can't open the debugfs directory\n"); iwl_dbgfs_unregister(priv); - return -ENOENT; + return ret; } EXPORT_SYMBOL(iwl_dbgfs_register); @@ -324,14 +407,20 @@ EXPORT_SYMBOL(iwl_dbgfs_register); */ void iwl_dbgfs_unregister(struct iwl_priv *priv) { - if (!(priv->dbgfs)) + if (!priv->dbgfs) return; + DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_eeprom); DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_rx_statistics); DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_tx_statistics); DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_sram); + DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_log_event); DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_stations); DEBUGFS_REMOVE(priv->dbgfs->dir_data); + DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_sensitivity); + DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_chain_noise); + DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_tx_power); + DEBUGFS_REMOVE(priv->dbgfs->dir_rf); DEBUGFS_REMOVE(priv->dbgfs->dir_drv); kfree(priv->dbgfs); priv->dbgfs = NULL; @@ -339,3 +428,4 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv) EXPORT_SYMBOL(iwl_dbgfs_unregister); + diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h new file mode 100644 index 0000000..8d1b845 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -0,0 +1,1166 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +/* + * Please use this file (iwl-dev.h) for driver implementation definitions. + * Please use iwl-commands.h for uCode API definitions. + * Please use iwl-4965-hw.h for hardware-related definitions. + */ + +#ifndef __iwl_dev_h__ +#define __iwl_dev_h__ + +#include <linux/pci.h> /* for struct pci_device_id */ +#include <linux/kernel.h> +#include <net/ieee80211_radiotap.h> + +#define DRV_NAME "iwlagn" +#include "iwl-rfkill.h" +#include "iwl-eeprom.h" +#include "iwl-4965-hw.h" +#include "iwl-csr.h" +#include "iwl-prph.h" +#include "iwl-debug.h" +#include "iwl-led.h" +#include "iwl-power.h" +#include "iwl-agn-rs.h" + +/* configuration for the iwl4965 */ +extern struct iwl_cfg iwl4965_agn_cfg; +extern struct iwl_cfg iwl5300_agn_cfg; +extern struct iwl_cfg iwl5100_agn_cfg; +extern struct iwl_cfg iwl5350_agn_cfg; +extern struct iwl_cfg iwl5100_bg_cfg; +extern struct iwl_cfg iwl5100_abg_cfg; + +/* CT-KILL constants */ +#define CT_KILL_THRESHOLD 110 /* in Celsius */ + +/* Default noise level to report when noise measurement is not available. + * This may be because we're: + * 1) Not associated (4965, no beacon statistics being sent to driver) + * 2) Scanning (noise measurement does not apply to associated channel) + * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) + * Use default noise value of -127 ... this is below the range of measurable + * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. + * Also, -127 works better than 0 when averaging frames with/without + * noise info (e.g. averaging might be done in app); measured dBm values are + * always negative ... using a negative value as the default keeps all + * averages within an s8's (used in some apps) range of negative values. */ +#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) + +/* + * RTS threshold here is total size [2347] minus 4 FCS bytes + * Per spec: + * a value of 0 means RTS on all data/management packets + * a value > max MSDU size means no RTS + * else RTS for data/management frames where MPDU is larger + * than RTS value. + */ +#define DEFAULT_RTS_THRESHOLD 2347U +#define MIN_RTS_THRESHOLD 0U +#define MAX_RTS_THRESHOLD 2347U +#define MAX_MSDU_SIZE 2304U +#define MAX_MPDU_SIZE 2346U +#define DEFAULT_BEACON_INTERVAL 100U +#define DEFAULT_SHORT_RETRY_LIMIT 7U +#define DEFAULT_LONG_RETRY_LIMIT 4U + +struct iwl_rx_mem_buffer { + dma_addr_t dma_addr; + struct sk_buff *skb; + struct list_head list; +}; + +/* + * Generic queue structure + * + * Contains common data for Rx and Tx queues + */ +struct iwl_queue { + int n_bd; /* number of BDs in this queue */ + int write_ptr; /* 1-st empty entry (index) host_w*/ + int read_ptr; /* last used entry (index) host_r*/ + dma_addr_t dma_addr; /* physical addr for BD's */ + int n_window; /* safe queue window */ + u32 id; + int low_mark; /* low watermark, resume queue if free + * space more than this */ + int high_mark; /* high watermark, stop queue if free + * space less than this */ +} __attribute__ ((packed)); + +#define MAX_NUM_OF_TBS (20) + +/* One for each TFD */ +struct iwl_tx_info { + struct ieee80211_tx_status status; + struct sk_buff *skb[MAX_NUM_OF_TBS]; +}; + +/** + * struct iwl_tx_queue - Tx Queue for DMA + * @q: generic Rx/Tx queue descriptor + * @bd: base of circular buffer of TFDs + * @cmd: array of command/Tx buffers + * @dma_addr_cmd: physical address of cmd/tx buffer array + * @txb: array of per-TFD driver data + * @need_update: indicates need to update read/write index + * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled + * + * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame + * descriptors) and required locking structures. + */ +struct iwl_tx_queue { + struct iwl_queue q; + struct iwl_tfd_frame *bd; + struct iwl_cmd *cmd[TFD_TX_CMD_SLOTS]; + struct iwl_tx_info *txb; + int need_update; + int sched_retry; + int active; +}; + +#define IWL_NUM_SCAN_RATES (2) + +struct iwl4965_channel_tgd_info { + u8 type; + s8 max_power; +}; + +struct iwl4965_channel_tgh_info { + s64 last_radar_time; +}; + +/* + * One for each channel, holds all channel setup data + * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant + * with one another! + */ +struct iwl_channel_info { + struct iwl4965_channel_tgd_info tgd; + struct iwl4965_channel_tgh_info tgh; + struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */ + struct iwl_eeprom_channel fat_eeprom; /* EEPROM regulatory limit for + * FAT channel */ + + u8 channel; /* channel number */ + u8 flags; /* flags copied from EEPROM */ + s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ + s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */ + s8 min_power; /* always 0 */ + s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ + + u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */ + u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */ + enum ieee80211_band band; + + /* FAT channel info */ + s8 fat_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ + s8 fat_curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */ + s8 fat_min_power; /* always 0 */ + s8 fat_scan_power; /* (dBm) eeprom, direct scans, any rate */ + u8 fat_flags; /* flags copied from EEPROM */ + u8 fat_extension_channel; /* HT_IE_EXT_CHANNEL_* */ +}; + +struct iwl4965_clip_group { + /* maximum power level to prevent clipping for each rate, derived by + * us from this band's saturation power in EEPROM */ + const s8 clip_powers[IWL_MAX_RATES]; +}; + + +#define IWL_TX_FIFO_AC0 0 +#define IWL_TX_FIFO_AC1 1 +#define IWL_TX_FIFO_AC2 2 +#define IWL_TX_FIFO_AC3 3 +#define IWL_TX_FIFO_HCCA_1 5 +#define IWL_TX_FIFO_HCCA_2 6 +#define IWL_TX_FIFO_NONE 7 + +/* Minimum number of queues. MAX_NUM is defined in hw specific files */ +#define IWL_MIN_NUM_QUEUES 4 + +/* Power management (not Tx power) structures */ + +enum iwl_pwr_src { + IWL_PWR_SRC_VMAIN, + IWL_PWR_SRC_VAUX, +}; + +#define IEEE80211_DATA_LEN 2304 +#define IEEE80211_4ADDR_LEN 30 +#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) +#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) + +struct iwl_frame { + union { + struct ieee80211_hdr frame; + struct iwl_tx_beacon_cmd beacon; + u8 raw[IEEE80211_FRAME_LEN]; + u8 cmd[360]; + } u; + struct list_head list; +}; + +#define SEQ_TO_QUEUE(x) ((x >> 8) & 0xbf) +#define QUEUE_TO_SEQ(x) ((x & 0xbf) << 8) +#define SEQ_TO_INDEX(x) ((u8)(x & 0xff)) +#define INDEX_TO_SEQ(x) ((u8)(x & 0xff)) +#define SEQ_HUGE_FRAME (0x4000) +#define SEQ_RX_FRAME __constant_cpu_to_le16(0x8000) +#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) +#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) +#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) + +enum { + /* CMD_SIZE_NORMAL = 0, */ + CMD_SIZE_HUGE = (1 << 0), + /* CMD_SYNC = 0, */ + CMD_ASYNC = (1 << 1), + /* CMD_NO_SKB = 0, */ + CMD_WANT_SKB = (1 << 2), +}; + +struct iwl_cmd; +struct iwl_priv; + +struct iwl_cmd_meta { + struct iwl_cmd_meta *source; + union { + struct sk_buff *skb; + int (*callback)(struct iwl_priv *priv, + struct iwl_cmd *cmd, struct sk_buff *skb); + } __attribute__ ((packed)) u; + + /* The CMD_SIZE_HUGE flag bit indicates that the command + * structure is stored at the end of the shared queue memory. */ + u32 flags; + +} __attribute__ ((packed)); + +#define IWL_CMD_MAX_PAYLOAD 320 + +/** + * struct iwl_cmd + * + * For allocation of the command and tx queues, this establishes the overall + * size of the largest command we send to uCode, except for a scan command + * (which is relatively huge; space is allocated separately). + */ +struct iwl_cmd { + struct iwl_cmd_meta meta; /* driver data */ + struct iwl_cmd_header hdr; /* uCode API */ + union { + struct iwl_addsta_cmd addsta; + struct iwl_led_cmd led; + u32 flags; + u8 val8; + u16 val16; + u32 val32; + struct iwl4965_bt_cmd bt; + struct iwl4965_rxon_time_cmd rxon_time; + struct iwl_powertable_cmd powertable; + struct iwl_qosparam_cmd qosparam; + struct iwl_tx_cmd tx; + struct iwl4965_rxon_assoc_cmd rxon_assoc; + struct iwl_rem_sta_cmd rm_sta; + u8 *indirect; + u8 payload[IWL_CMD_MAX_PAYLOAD]; + } __attribute__ ((packed)) cmd; +} __attribute__ ((packed)); + +struct iwl_host_cmd { + u8 id; + u16 len; + struct iwl_cmd_meta meta; + const void *data; +}; + +#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_cmd) - \ + sizeof(struct iwl_cmd_meta)) + +/* + * RX related structures and functions + */ +#define RX_FREE_BUFFERS 64 +#define RX_LOW_WATERMARK 8 + +#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 +#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 +#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 + +/** + * struct iwl_rx_queue - Rx queue + * @processed: Internal index to last handled Rx packet + * @read: Shared index to newest available Rx buffer + * @write: Shared index to oldest written Rx packet + * @free_count: Number of pre-allocated buffers in rx_free + * @rx_free: list of free SKBs for use + * @rx_used: List of Rx buffers with no SKB + * @need_update: flag to indicate we need to update read/write index + * + * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers + */ +struct iwl_rx_queue { + __le32 *bd; + dma_addr_t dma_addr; + struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; + struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE]; + u32 processed; + u32 read; + u32 write; + u32 free_count; + struct list_head rx_free; + struct list_head rx_used; + int need_update; + spinlock_t lock; +}; + +#define IWL_SUPPORTED_RATES_IE_LEN 8 + +#define SCAN_INTERVAL 100 + +#define MAX_A_CHANNELS 252 +#define MIN_A_CHANNELS 7 + +#define MAX_B_CHANNELS 14 +#define MIN_B_CHANNELS 1 + +#define MAX_TID_COUNT 9 + +#define IWL_INVALID_RATE 0xFF +#define IWL_INVALID_VALUE -1 + +/** + * struct iwl_ht_agg -- aggregation status while waiting for block-ack + * @txq_id: Tx queue used for Tx attempt + * @frame_count: # frames attempted by Tx command + * @wait_for_ba: Expect block-ack before next Tx reply + * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window + * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window + * @bitmap1: High order, one bit for each frame pending ACK in Tx window + * @rate_n_flags: Rate at which Tx was attempted + * + * If REPLY_TX indicates that aggregation was attempted, driver must wait + * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info + * until block ack arrives. + */ +struct iwl_ht_agg { + u16 txq_id; + u16 frame_count; + u16 wait_for_ba; + u16 start_idx; + u64 bitmap; + u32 rate_n_flags; +#define IWL_AGG_OFF 0 +#define IWL_AGG_ON 1 +#define IWL_EMPTYING_HW_QUEUE_ADDBA 2 +#define IWL_EMPTYING_HW_QUEUE_DELBA 3 + u8 state; +}; + + +struct iwl_tid_data { + u16 seq_number; + u16 tfds_in_queue; + struct iwl_ht_agg agg; +}; + +struct iwl_hw_key { + enum ieee80211_key_alg alg; + int keylen; + u8 keyidx; + struct ieee80211_key_conf *conf; + u8 key[32]; +}; + +union iwl4965_ht_rate_supp { + u16 rates; + struct { + u8 siso_rate; + u8 mimo_rate; + }; +}; + +#define CFG_HT_RX_AMPDU_FACTOR_DEF (0x3) +#define CFG_HT_MPDU_DENSITY_2USEC (0x5) +#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_2USEC + +struct iwl_ht_info { + /* self configuration data */ + u8 is_ht; + u8 supported_chan_width; + u8 is_green_field; + u8 sgf; /* HT_SHORT_GI_* short guard interval */ + u8 max_amsdu_size; + u8 ampdu_factor; + u8 mpdu_density; + u8 supp_mcs_set[16]; + /* BSS related data */ + u8 control_channel; + u8 extension_chan_offset; + u8 tx_chan_width; + u8 ht_protection; + u8 non_GF_STA_present; +}; + +union iwl_qos_capabity { + struct { + u8 edca_count:4; /* bit 0-3 */ + u8 q_ack:1; /* bit 4 */ + u8 queue_request:1; /* bit 5 */ + u8 txop_request:1; /* bit 6 */ + u8 reserved:1; /* bit 7 */ + } q_AP; + struct { + u8 acvo_APSD:1; /* bit 0 */ + u8 acvi_APSD:1; /* bit 1 */ + u8 ac_bk_APSD:1; /* bit 2 */ + u8 ac_be_APSD:1; /* bit 3 */ + u8 q_ack:1; /* bit 4 */ + u8 max_len:2; /* bit 5-6 */ + u8 more_data_ack:1; /* bit 7 */ + } q_STA; + u8 val; +}; + +/* QoS structures */ +struct iwl_qos_info { + int qos_enable; + int qos_active; + union iwl_qos_capabity qos_cap; + struct iwl_qosparam_cmd def_qos_parm; +}; + +#define STA_PS_STATUS_WAKE 0 +#define STA_PS_STATUS_SLEEP 1 + +struct iwl_station_entry { + struct iwl_addsta_cmd sta; + struct iwl_tid_data tid[MAX_TID_COUNT]; + u8 used; + u8 ps_status; + struct iwl_hw_key keyinfo; +}; + +/* one for each uCode image (inst/data, boot/init/runtime) */ +struct fw_desc { + void *v_addr; /* access by driver */ + dma_addr_t p_addr; /* access by card's busmaster DMA */ + u32 len; /* bytes */ +}; + +/* uCode file layout */ +struct iwl_ucode { + __le32 ver; /* major/minor/subminor */ + __le32 inst_size; /* bytes of runtime instructions */ + __le32 data_size; /* bytes of runtime data */ + __le32 init_size; /* bytes of initialization instructions */ + __le32 init_data_size; /* bytes of initialization data */ + __le32 boot_size; /* bytes of bootstrap instructions */ + u8 data[0]; /* data in same order as "size" elements */ +}; + +struct iwl4965_ibss_seq { + u8 mac[ETH_ALEN]; + u16 seq_num; + u16 frag_num; + unsigned long packet_time; + struct list_head list; +}; + +struct iwl_sensitivity_ranges { + u16 min_nrg_cck; + u16 max_nrg_cck; + + u16 nrg_th_cck; + u16 nrg_th_ofdm; + + u16 auto_corr_min_ofdm; + u16 auto_corr_min_ofdm_mrc; + u16 auto_corr_min_ofdm_x1; + u16 auto_corr_min_ofdm_mrc_x1; + + u16 auto_corr_max_ofdm; + u16 auto_corr_max_ofdm_mrc; + u16 auto_corr_max_ofdm_x1; + u16 auto_corr_max_ofdm_mrc_x1; + + u16 auto_corr_max_cck; + u16 auto_corr_max_cck_mrc; + u16 auto_corr_min_cck; + u16 auto_corr_min_cck_mrc; +}; + + +#define IWL_FAT_CHANNEL_52 BIT(IEEE80211_BAND_5GHZ) + +/** + * struct iwl_hw_params + * @max_txq_num: Max # Tx queues supported + * @tx/rx_chains_num: Number of TX/RX chains + * @valid_tx/rx_ant: usable antennas + * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) + * @max_rxq_log: Log-base-2 of max_rxq_size + * @rx_buf_size: Rx buffer size + * @max_stations: + * @bcast_sta_id: + * @fat_channel: is 40MHz width possible in band 2.4 + * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ) + * @sw_crypto: 0 for hw, 1 for sw + * @max_xxx_size: for ucode uses + * @ct_kill_threshold: temperature threshold + * @struct iwl_sensitivity_ranges: range of sensitivity values + * @first_ampdu_q: first HW queue available for ampdu + */ +struct iwl_hw_params { + u16 max_txq_num; + u8 tx_chains_num; + u8 rx_chains_num; + u8 valid_tx_ant; + u8 valid_rx_ant; + u16 max_rxq_size; + u16 max_rxq_log; + u32 rx_buf_size; + u32 max_pkt_size; + u8 max_stations; + u8 bcast_sta_id; + u8 fat_channel; + u8 sw_crypto; + u32 max_inst_size; + u32 max_data_size; + u32 max_bsm_size; + u32 ct_kill_threshold; /* value in hw-dependent units */ + const struct iwl_sensitivity_ranges *sens; + u8 first_ampdu_q; +}; + +#define HT_SHORT_GI_20MHZ (1 << 0) +#define HT_SHORT_GI_40MHZ (1 << 1) + + +#define IWL_RX_HDR(x) ((struct iwl4965_rx_frame_hdr *)(\ + x->u.rx_frame.stats.payload + \ + x->u.rx_frame.stats.phy_count)) +#define IWL_RX_END(x) ((struct iwl4965_rx_frame_end *)(\ + IWL_RX_HDR(x)->payload + \ + le16_to_cpu(IWL_RX_HDR(x)->len))) +#define IWL_RX_STATS(x) (&x->u.rx_frame.stats) +#define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload) + + +/****************************************************************************** + * + * Functions implemented in iwl-base.c which are forward declared here + * for use by iwl-*.c + * + *****************************************************************************/ +struct iwl_addsta_cmd; +extern int iwl_send_add_sta(struct iwl_priv *priv, + struct iwl_addsta_cmd *sta, u8 flags); +u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap, + u8 flags, struct ieee80211_ht_info *ht_info); +extern unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + const u8 *dest, int left); +extern void iwl4965_update_chain_flags(struct iwl_priv *priv); +int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src); +extern int iwl4965_set_power(struct iwl_priv *priv, void *cmd); + +extern const u8 iwl_bcast_addr[ETH_ALEN]; + +/****************************************************************************** + * + * Functions implemented in iwl-[34]*.c which are forward declared here + * for use by iwl-base.c + * + * NOTE: The implementation of these functions are hardware specific + * which is why they are in the hardware specific files (vs. iwl-base.c) + * + * Naming convention -- + * iwl4965_ <-- Its part of iwlwifi (should be changed to iwl4965_) + * iwl4965_hw_ <-- Hardware specific (implemented in iwl-XXXX.c by all HW) + * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) + * iwl4965_bg_ <-- Called from work queue context + * iwl4965_mac_ <-- mac80211 callback + * + ****************************************************************************/ +extern int iwl_rxq_stop(struct iwl_priv *priv); +extern void iwl_txq_ctx_stop(struct iwl_priv *priv); +extern unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, + struct iwl_frame *frame, u8 rate); +extern void iwl4965_disable_events(struct iwl_priv *priv); + +extern int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel); +extern int iwl_queue_space(const struct iwl_queue *q); +static inline int iwl_queue_used(const struct iwl_queue *q, int i) +{ + return q->write_ptr > q->read_ptr ? + (i >= q->read_ptr && i < q->write_ptr) : + !(i < q->read_ptr && i >= q->write_ptr); +} + + +static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge) +{ + /* This is for scan command, the big buffer at end of command array */ + if (is_huge) + return q->n_window; /* must be power of 2 */ + + /* Otherwise, use normal size buffers */ + return index & (q->n_window - 1); +} + + +struct iwl_priv; + +/* + * Forward declare iwl-4965.c functions for iwl-base.c + */ +extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv); +int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id, + u8 tid, int txq_id); + +/* Structures, enum, and defines specific to the 4965 */ + +#define IWL_KW_SIZE 0x1000 /*4k */ + +struct iwl_kw { + dma_addr_t dma_addr; + void *v_addr; + size_t size; +}; + +#define IWL_CHANNEL_WIDTH_20MHZ 0 +#define IWL_CHANNEL_WIDTH_40MHZ 1 + +#define IWL_MIMO_PS_STATIC 0 +#define IWL_MIMO_PS_NONE 3 +#define IWL_MIMO_PS_DYNAMIC 1 +#define IWL_MIMO_PS_INVALID 2 + +#define IWL_OPERATION_MODE_AUTO 0 +#define IWL_OPERATION_MODE_HT_ONLY 1 +#define IWL_OPERATION_MODE_MIXED 2 +#define IWL_OPERATION_MODE_20MHZ 3 + +#define IWL_TX_CRC_SIZE 4 +#define IWL_TX_DELIMITER_SIZE 4 + +#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 + +struct iwl4965_lq_mngr { + spinlock_t lock; + s32 max_window_size; + s32 *expected_tpt; + u8 *next_higher_rate; + u8 *next_lower_rate; + unsigned long stamp; + unsigned long stamp_last; + u32 flush_time; + u32 tx_packets; +}; + +/* Sensitivity and chain noise calibration */ +#define INTERFERENCE_DATA_AVAILABLE __constant_cpu_to_le32(1) +#define INITIALIZATION_VALUE 0xFFFF +#define CAL_NUM_OF_BEACONS 20 +#define MAXIMUM_ALLOWED_PATHLOSS 15 + +#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 + +#define MAX_FA_OFDM 50 +#define MIN_FA_OFDM 5 +#define MAX_FA_CCK 50 +#define MIN_FA_CCK 5 + +#define AUTO_CORR_STEP_OFDM 1 + +#define AUTO_CORR_STEP_CCK 3 +#define AUTO_CORR_MAX_TH_CCK 160 + +#define NRG_DIFF 2 +#define NRG_STEP_CCK 2 +#define NRG_MARGIN 8 +#define MAX_NUMBER_CCK_NO_FA 100 + +#define AUTO_CORR_CCK_MIN_VAL_DEF (125) + +#define CHAIN_A 0 +#define CHAIN_B 1 +#define CHAIN_C 2 +#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 +#define ALL_BAND_FILTER 0xFF00 +#define IN_BAND_FILTER 0xFF +#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF + +#define NRG_NUM_PREV_STAT_L 20 +#define NUM_RX_CHAINS 3 + +enum iwl4965_false_alarm_state { + IWL_FA_TOO_MANY = 0, + IWL_FA_TOO_FEW = 1, + IWL_FA_GOOD_RANGE = 2, +}; + +enum iwl4965_chain_noise_state { + IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ + IWL_CHAIN_NOISE_ACCUMULATE = 1, + IWL_CHAIN_NOISE_CALIBRATED = 2, +}; + +enum iwl4965_calib_enabled_state { + IWL_CALIB_DISABLED = 0, /* must be 0 */ + IWL_CALIB_ENABLED = 1, +}; + +struct statistics_general_data { + u32 beacon_silence_rssi_a; + u32 beacon_silence_rssi_b; + u32 beacon_silence_rssi_c; + u32 beacon_energy_a; + u32 beacon_energy_b; + u32 beacon_energy_c; +}; + +/* Opaque calibration results */ +struct iwl_calib_result { + void *buf; + size_t buf_len; +}; + +enum ucode_type { + UCODE_NONE = 0, + UCODE_INIT, + UCODE_RT +}; + +/* Sensitivity calib data */ +struct iwl_sensitivity_data { + u32 auto_corr_ofdm; + u32 auto_corr_ofdm_mrc; + u32 auto_corr_ofdm_x1; + u32 auto_corr_ofdm_mrc_x1; + u32 auto_corr_cck; + u32 auto_corr_cck_mrc; + + u32 last_bad_plcp_cnt_ofdm; + u32 last_fa_cnt_ofdm; + u32 last_bad_plcp_cnt_cck; + u32 last_fa_cnt_cck; + + u32 nrg_curr_state; + u32 nrg_prev_state; + u32 nrg_value[10]; + u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; + u32 nrg_silence_ref; + u32 nrg_energy_idx; + u32 nrg_silence_idx; + u32 nrg_th_cck; + s32 nrg_auto_corr_silence_diff; + u32 num_in_cck_no_fa; + u32 nrg_th_ofdm; +}; + +/* Chain noise (differential Rx gain) calib data */ +struct iwl_chain_noise_data { + u8 state; + u16 beacon_count; + u32 chain_noise_a; + u32 chain_noise_b; + u32 chain_noise_c; + u32 chain_signal_a; + u32 chain_signal_b; + u32 chain_signal_c; + u8 disconn_array[NUM_RX_CHAINS]; + u8 delta_gain_code[NUM_RX_CHAINS]; + u8 radio_write; +}; + +#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ +#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ + + +enum { + MEASUREMENT_READY = (1 << 0), + MEASUREMENT_ACTIVE = (1 << 1), +}; + + +#define IWL_MAX_NUM_QUEUES 20 /* FIXME: do dynamic allocation */ +#define IWL_CALIB_MAX 3 + +struct iwl_priv { + + /* ieee device used by generic ieee processing code */ + struct ieee80211_hw *hw; + struct ieee80211_channel *ieee_channels; + struct ieee80211_rate *ieee_rates; + struct iwl_cfg *cfg; + + /* temporary frame storage list */ + struct list_head free_frames; + int frames_count; + + enum ieee80211_band band; + int alloc_rxb_skb; + bool add_radiotap; + + void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb); + + struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; + +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT + /* spectrum measurement report caching */ + struct iwl4965_spectrum_notification measure_report; + u8 measurement_status; +#endif + /* ucode beacon time */ + u32 ucode_beacon_time; + + /* we allocate array of iwl4965_channel_info for NIC's valid channels. + * Access via channel # using indirect index array */ + struct iwl_channel_info *channel_info; /* channel info array */ + u8 channel_count; /* # of channels */ + + /* each calibration channel group in the EEPROM has a derived + * clip setting for each rate. */ + const struct iwl4965_clip_group clip_groups[5]; + + /* thermal calibration */ + s32 temperature; /* degrees Kelvin */ + s32 last_temperature; + + /* init calibration results */ + struct iwl_calib_result calib_results[IWL_CALIB_MAX]; + + /* Scan related variables */ + unsigned long last_scan_jiffies; + unsigned long next_scan_jiffies; + unsigned long scan_start; + unsigned long scan_pass_start; + unsigned long scan_start_tsf; + int scan_bands; + int one_direct_scan; + u8 direct_ssid_len; + u8 direct_ssid[IW_ESSID_MAX_SIZE]; + struct iwl_scan_cmd *scan; + u32 scan_tx_ant[IEEE80211_NUM_BANDS]; + + /* spinlock */ + spinlock_t lock; /* protect general shared data */ + spinlock_t hcmd_lock; /* protect hcmd */ + struct mutex mutex; + + /* basic pci-network driver stuff */ + struct pci_dev *pci_dev; + + /* pci hardware address support */ + void __iomem *hw_base; + u32 hw_rev; + u32 hw_wa_rev; + u8 rev_id; + + /* uCode images, save to reload in case of failure */ + struct fw_desc ucode_code; /* runtime inst */ + struct fw_desc ucode_data; /* runtime data original */ + struct fw_desc ucode_data_backup; /* runtime data save/restore */ + struct fw_desc ucode_init; /* initialization inst */ + struct fw_desc ucode_init_data; /* initialization data */ + struct fw_desc ucode_boot; /* bootstrap inst */ + enum ucode_type ucode_type; + u8 ucode_write_complete; /* the image write is complete */ + + + struct iwl4965_rxon_time_cmd rxon_timing; + + /* We declare this const so it can only be + * changed via explicit cast within the + * routines that actually update the physical + * hardware */ + const struct iwl_rxon_cmd active_rxon; + struct iwl_rxon_cmd staging_rxon; + + int error_recovering; + struct iwl_rxon_cmd recovery_rxon; + + /* 1st responses from initialize and runtime uCode images. + * 4965's initialize alive response contains some calibration data. */ + struct iwl_init_alive_resp card_alive_init; + struct iwl_alive_resp card_alive; +#ifdef CONFIG_IWLWIFI_RFKILL + struct rfkill *rfkill; +#endif + +#ifdef CONFIG_IWLWIFI_LEDS + struct iwl_led led[IWL_LED_TRG_MAX]; + unsigned long last_blink_time; + u8 last_blink_rate; + u8 allow_blinking; + u64 led_tpt; +#endif + + u16 active_rate; + u16 active_rate_basic; + + u8 assoc_station_added; + u8 use_ant_b_for_management_frame; /* Tx antenna selection */ + u8 start_calib; + struct iwl_sensitivity_data sensitivity_data; + struct iwl_chain_noise_data chain_noise_data; + __le16 sensitivity_tbl[HD_TABLE_SIZE]; + + struct iwl_ht_info current_ht_config; + u8 last_phy_res[100]; + + /* Rate scaling data */ + struct iwl4965_lq_mngr lq_mngr; + + /* Rate scaling data */ + s8 data_retry_limit; + u8 retry_rate; + + wait_queue_head_t wait_command_queue; + + int activity_timer_active; + + /* Rx and Tx DMA processing queues */ + struct iwl_rx_queue rxq; + struct iwl_tx_queue txq[IWL_MAX_NUM_QUEUES]; + unsigned long txq_ctx_active_msk; + struct iwl_kw kw; /* keep warm address */ + u32 scd_base_addr; /* scheduler sram base address */ + + unsigned long status; + + int last_rx_rssi; /* From Rx packet statisitics */ + int last_rx_noise; /* From beacon statistics */ + + /* counts mgmt, ctl, and data packets */ + struct traffic_stats { + u32 cnt; + u64 bytes; + } tx_stats[3], rx_stats[3]; + + struct iwl_power_mgr power_data; + + struct iwl_notif_statistics statistics; + unsigned long last_statistics_time; + + /* context information */ + u8 essid[IW_ESSID_MAX_SIZE]; + u8 essid_len; + u16 rates_mask; + + u32 power_mode; + u32 antenna; + u8 bssid[ETH_ALEN]; + u16 rts_threshold; + u8 mac_addr[ETH_ALEN]; + + /*station table variables */ + spinlock_t sta_lock; + int num_stations; + struct iwl_station_entry stations[IWL_STATION_COUNT]; + struct iwl_wep_key wep_keys[WEP_KEYS_MAX]; + u8 default_wep_key; + u8 key_mapping_key; + unsigned long ucode_key_table; + + /* Indication if ieee80211_ops->open has been called */ + u8 is_open; + + u8 mac80211_registered; + + /* Rx'd packet timing information */ + u32 last_beacon_time; + u64 last_tsf; + + /* eeprom */ + u8 *eeprom; + struct iwl_eeprom_calib_info *calib_info; + + enum ieee80211_if_types iw_mode; + + struct sk_buff *ibss_beacon; + + /* Last Rx'd beacon timestamp */ + u64 timestamp; + u16 beacon_int; + struct ieee80211_vif *vif; + + struct iwl_hw_params hw_params; + /* driver/uCode shared Tx Byte Counts and Rx status */ + void *shared_virt; + int rb_closed_offset; + /* Physical Pointer to Tx Byte Counts and Rx status */ + dma_addr_t shared_phys; + + /* Current association information needed to configure the + * hardware */ + u16 assoc_id; + u16 assoc_capability; + u8 ps_mode; + + struct iwl_qos_info qos_data; + + struct workqueue_struct *workqueue; + + struct work_struct up; + struct work_struct restart; + struct work_struct calibrated_work; + struct work_struct scan_completed; + struct work_struct rx_replenish; + struct work_struct rf_kill; + struct work_struct abort_scan; + struct work_struct update_link_led; + struct work_struct auth_work; + struct work_struct report_work; + struct work_struct request_scan; + struct work_struct beacon_update; + struct work_struct set_monitor; + + struct tasklet_struct irq_tasklet; + + struct work_struct init_alive_start; + struct work_struct alive_start; + struct work_struct scan_check; + /* TX Power */ + s8 tx_power_user_lmt; + s8 tx_power_channel_lmt; + +#ifdef CONFIG_PM + u32 pm_state[16]; +#endif + +#ifdef CONFIG_IWLWIFI_DEBUG + /* debugging info */ + u32 debug_level; + u32 framecnt_to_us; + atomic_t restrict_refcnt; +#ifdef CONFIG_IWLWIFI_DEBUGFS + /* debugfs */ + struct iwl_debugfs *dbgfs; +#endif /* CONFIG_IWLWIFI_DEBUGFS */ +#endif /* CONFIG_IWLWIFI_DEBUG */ + + struct work_struct txpower_work; + u32 disable_sens_cal; + u32 disable_chain_noise_cal; + u32 disable_tx_power_cal; + struct work_struct run_time_calib_work; + struct timer_list statistics_periodic; +}; /*iwl_priv */ + +static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id) +{ + set_bit(txq_id, &priv->txq_ctx_active_msk); +} + +static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id) +{ + clear_bit(txq_id, &priv->txq_ctx_active_msk); +} + +#ifdef CONFIG_IWLWIFI_DEBUG +const char *iwl_get_tx_fail_reason(u32 status); +#else +static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; } +#endif + + +static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv, + int txq_id, int idx) +{ + if (priv->txq[txq_id].txb[idx].skb[0]) + return (struct ieee80211_hdr *)priv->txq[txq_id]. + txb[idx].skb[0]->data; + return NULL; +} + + +static inline int iwl_is_associated(struct iwl_priv *priv) +{ + return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; +} + +static inline int is_channel_valid(const struct iwl_channel_info *ch_info) +{ + if (ch_info == NULL) + return 0; + return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; +} + +static inline int is_channel_radar(const struct iwl_channel_info *ch_info) +{ + return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; +} + +static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info) +{ + return ch_info->band == IEEE80211_BAND_5GHZ; +} + +static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info) +{ + return ch_info->band == IEEE80211_BAND_2GHZ; +} + +static inline int is_channel_passive(const struct iwl_channel_info *ch) +{ + return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; +} + +static inline int is_channel_ibss(const struct iwl_channel_info *ch) +{ + return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; +} + +#ifdef CONFIG_IWLWIFI_DEBUG +static inline void iwl_print_hex_dump(struct iwl_priv *priv, int level, + void *p, u32 len) +{ + if (!(priv->debug_level & level)) + return; + + print_hex_dump(KERN_DEBUG, "iwl data: ", DUMP_PREFIX_OFFSET, 16, 1, + p, len, 1); +} +#else +static inline void iwl_print_hex_dump(struct iwl_priv *priv, int level, + void *p, u32 len) +{ +} +#endif + +extern const struct iwl_channel_info *iwl_get_channel_info( + const struct iwl_priv *priv, enum ieee80211_band band, u16 channel); + +/* Requires full declaration of iwl_priv before including */ + +#endif /* __iwl_dev_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 358b548..7e8eb0b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -69,8 +69,8 @@ #include <net/mac80211.h> -#include "iwl-4965-commands.h" -#include "iwl-4965.h" +#include "iwl-commands.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-debug.h" #include "iwl-eeprom.h" @@ -194,6 +194,12 @@ void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv) } EXPORT_SYMBOL(iwlcore_eeprom_release_semaphore); +const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) +{ + BUG_ON(offset >= priv->cfg->eeprom_size); + return &priv->eeprom[offset]; +} +EXPORT_SYMBOL(iwlcore_eeprom_query_addr); /** * iwl_eeprom_init - read EEPROM contents @@ -204,30 +210,35 @@ EXPORT_SYMBOL(iwlcore_eeprom_release_semaphore); */ int iwl_eeprom_init(struct iwl_priv *priv) { - u16 *e = (u16 *)&priv->eeprom; + u16 *e; u32 gp = iwl_read32(priv, CSR_EEPROM_GP); u32 r; - int sz = sizeof(priv->eeprom); + int sz = priv->cfg->eeprom_size; int ret; int i; u16 addr; - /* The EEPROM structure has several padding buffers within it - * and when adding new EEPROM maps is subject to programmer errors - * which may be very difficult to identify without explicitly - * checking the resulting size of the eeprom map. */ - BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE); + /* allocate eeprom */ + priv->eeprom = kzalloc(sz, GFP_KERNEL); + if (!priv->eeprom) { + ret = -ENOMEM; + goto alloc_err; + } + e = (u16 *)priv->eeprom; - if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) { + ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv); + if (ret < 0) { IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp); - return -ENOENT; + ret = -ENOENT; + goto err; } /* Make sure driver (instead of uCode) is allowed to read EEPROM */ ret = priv->cfg->ops->lib->eeprom_ops.acquire_semaphore(priv); if (ret < 0) { IWL_ERROR("Failed to acquire EEPROM semaphore.\n"); - return -ENOENT; + ret = -ENOENT; + goto err; } /* eeprom is an array of 16bit values */ @@ -251,61 +262,97 @@ int iwl_eeprom_init(struct iwl_priv *priv) e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16)); } ret = 0; - done: priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv); +err: + if (ret) + kfree(priv->eeprom); +alloc_err: return ret; } EXPORT_SYMBOL(iwl_eeprom_init); +void iwl_eeprom_free(struct iwl_priv *priv) +{ + kfree(priv->eeprom); + priv->eeprom = NULL; +} +EXPORT_SYMBOL(iwl_eeprom_free); + +int iwl_eeprom_check_version(struct iwl_priv *priv) +{ + return priv->cfg->ops->lib->eeprom_ops.check_version(priv); +} +EXPORT_SYMBOL(iwl_eeprom_check_version); + +const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) +{ + return priv->cfg->ops->lib->eeprom_ops.query_addr(priv, offset); +} +EXPORT_SYMBOL(iwl_eeprom_query_addr); + +u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset) +{ + return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8); +} +EXPORT_SYMBOL(iwl_eeprom_query16); void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac) { - memcpy(mac, priv->eeprom.mac_address, 6); + const u8 *addr = priv->cfg->ops->lib->eeprom_ops.query_addr(priv, + EEPROM_MAC_ADDRESS); + memcpy(mac, addr, ETH_ALEN); } EXPORT_SYMBOL(iwl_eeprom_get_mac); static void iwl_init_band_reference(const struct iwl_priv *priv, - int band, - int *eeprom_ch_count, - const struct iwl4965_eeprom_channel - **eeprom_ch_info, - const u8 **eeprom_ch_index) + int eep_band, int *eeprom_ch_count, + const struct iwl_eeprom_channel **eeprom_ch_info, + const u8 **eeprom_ch_index) { - switch (band) { + u32 offset = priv->cfg->ops->lib-> + eeprom_ops.regulatory_bands[eep_band - 1]; + switch (eep_band) { case 1: /* 2.4GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1); - *eeprom_ch_info = priv->eeprom.band_1_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_1; break; case 2: /* 4.9GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2); - *eeprom_ch_info = priv->eeprom.band_2_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_2; break; case 3: /* 5.2GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3); - *eeprom_ch_info = priv->eeprom.band_3_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_3; break; case 4: /* 5.5GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4); - *eeprom_ch_info = priv->eeprom.band_4_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_4; break; case 5: /* 5.7GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5); - *eeprom_ch_info = priv->eeprom.band_5_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_5; break; case 6: /* 2.4GHz FAT channels */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6); - *eeprom_ch_info = priv->eeprom.band_24_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_6; break; case 7: /* 5 GHz FAT channels */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7); - *eeprom_ch_info = priv->eeprom.band_52_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_7; break; default: @@ -318,13 +365,13 @@ static void iwl_init_band_reference(const struct iwl_priv *priv, ? # x " " : "") /** - * iwl4965_set_fat_chan_info - Copy fat channel info into driver's priv. + * iwl_set_fat_chan_info - Copy fat channel info into driver's priv. * * Does not set up a command, or touch hardware. */ -static int iwl4965_set_fat_chan_info(struct iwl_priv *priv, +static int iwl_set_fat_chan_info(struct iwl_priv *priv, enum ieee80211_band band, u16 channel, - const struct iwl4965_eeprom_channel *eeprom_ch, + const struct iwl_eeprom_channel *eeprom_ch, u8 fat_extension_channel) { struct iwl_channel_info *ch_info; @@ -335,8 +382,8 @@ static int iwl4965_set_fat_chan_info(struct iwl_priv *priv, if (!is_channel_valid(ch_info)) return -1; - IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x" - " %ddBm): Ad-Hoc %ssupported\n", + IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):" + " Ad-Hoc %ssupported\n", ch_info->channel, is_channel_a_band(ch_info) ? "5.2" : "2.4", @@ -344,7 +391,6 @@ static int iwl4965_set_fat_chan_info(struct iwl_priv *priv, CHECK_AND_PRINT(ACTIVE), CHECK_AND_PRINT(RADAR), CHECK_AND_PRINT(WIDE), - CHECK_AND_PRINT(NARROW), CHECK_AND_PRINT(DFS), eeprom_ch->flags, eeprom_ch->max_power_avg, @@ -373,7 +419,7 @@ int iwl_init_channel_map(struct iwl_priv *priv) { int eeprom_ch_count = 0; const u8 *eeprom_ch_index = NULL; - const struct iwl4965_eeprom_channel *eeprom_ch_info = NULL; + const struct iwl_eeprom_channel *eeprom_ch_info = NULL; int band, ch; struct iwl_channel_info *ch_info; @@ -382,12 +428,6 @@ int iwl_init_channel_map(struct iwl_priv *priv) return 0; } - if (priv->eeprom.version < 0x2f) { - IWL_WARNING("Unsupported EEPROM version: 0x%04X\n", - priv->eeprom.version); - return -EINVAL; - } - IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n"); priv->channel_count = @@ -430,6 +470,11 @@ int iwl_init_channel_map(struct iwl_priv *priv) /* Copy the run-time flags so they are there even on * invalid channels */ ch_info->flags = eeprom_ch_info[ch].flags; + /* First write that fat is not enabled, and then enable + * one by one */ + ch_info->fat_extension_channel = + (IEEE80211_CHAN_NO_FAT_ABOVE | + IEEE80211_CHAN_NO_FAT_BELOW); if (!(is_channel_valid(ch_info))) { IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - " @@ -448,8 +493,8 @@ int iwl_init_channel_map(struct iwl_priv *priv) ch_info->scan_power = eeprom_ch_info[ch].max_power_avg; ch_info->min_power = 0; - IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x" - " %ddBm): Ad-Hoc %ssupported\n", + IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):" + " Ad-Hoc %ssupported\n", ch_info->channel, is_channel_a_band(ch_info) ? "5.2" : "2.4", @@ -458,7 +503,6 @@ int iwl_init_channel_map(struct iwl_priv *priv) CHECK_AND_PRINT_I(ACTIVE), CHECK_AND_PRINT_I(RADAR), CHECK_AND_PRINT_I(WIDE), - CHECK_AND_PRINT_I(NARROW), CHECK_AND_PRINT_I(DFS), eeprom_ch_info[ch].flags, eeprom_ch_info[ch].max_power_avg, @@ -471,8 +515,8 @@ int iwl_init_channel_map(struct iwl_priv *priv) /* Set the user_txpower_limit to the highest power * supported by any channel */ if (eeprom_ch_info[ch].max_power_avg > - priv->user_txpower_limit) - priv->user_txpower_limit = + priv->tx_power_user_lmt) + priv->tx_power_user_lmt = eeprom_ch_info[ch].max_power_avg; ch_info++; @@ -495,24 +539,26 @@ int iwl_init_channel_map(struct iwl_priv *priv) for (ch = 0; ch < eeprom_ch_count; ch++) { if ((band == 6) && - ((eeprom_ch_index[ch] == 5) || - (eeprom_ch_index[ch] == 6) || - (eeprom_ch_index[ch] == 7))) - fat_extension_chan = HT_IE_EXT_CHANNEL_MAX; + ((eeprom_ch_index[ch] == 5) || + (eeprom_ch_index[ch] == 6) || + (eeprom_ch_index[ch] == 7))) + /* both are allowed: above and below */ + fat_extension_chan = 0; else - fat_extension_chan = HT_IE_EXT_CHANNEL_ABOVE; + fat_extension_chan = + IEEE80211_CHAN_NO_FAT_BELOW; /* Set up driver's info for lower half */ - iwl4965_set_fat_chan_info(priv, ieeeband, - eeprom_ch_index[ch], - &(eeprom_ch_info[ch]), - fat_extension_chan); + iwl_set_fat_chan_info(priv, ieeeband, + eeprom_ch_index[ch], + &(eeprom_ch_info[ch]), + fat_extension_chan); /* Set up driver's info for upper half */ - iwl4965_set_fat_chan_info(priv, ieeeband, - (eeprom_ch_index[ch] + 4), - &(eeprom_ch_info[ch]), - HT_IE_EXT_CHANNEL_BELOW); + iwl_set_fat_chan_info(priv, ieeeband, + (eeprom_ch_index[ch] + 4), + &(eeprom_ch_info[ch]), + IEEE80211_CHAN_NO_FAT_ABOVE); } } @@ -521,23 +567,21 @@ int iwl_init_channel_map(struct iwl_priv *priv) EXPORT_SYMBOL(iwl_init_channel_map); /* - * iwl_free_channel_map - undo allocations in iwl4965_init_channel_map + * iwl_free_channel_map - undo allocations in iwl_init_channel_map */ void iwl_free_channel_map(struct iwl_priv *priv) { kfree(priv->channel_info); priv->channel_count = 0; } -EXPORT_SYMBOL(iwl_free_channel_map); /** * iwl_get_channel_info - Find driver's private channel info * * Based on band and channel number. */ -const struct iwl_channel_info *iwl_get_channel_info( - const struct iwl_priv *priv, - enum ieee80211_band band, u16 channel) +const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv, + enum ieee80211_band band, u16 channel) { int i; diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index bd0a042..d3a2a5b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -106,7 +106,7 @@ enum { EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ - EEPROM_CHANNEL_NARROW = (1 << 6), /* 10 MHz channel (not used) */ + /* Bit 6 Reserved (was Narrow Channel) */ EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ }; @@ -116,7 +116,7 @@ enum { /* *regulatory* channel data format in eeprom, one for each channel. * There are separate entries for FAT (40 MHz) vs. normal (20 MHz) channels. */ -struct iwl4965_eeprom_channel { +struct iwl_eeprom_channel { u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */ s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ } __attribute__ ((packed)); @@ -131,17 +131,55 @@ struct iwl4965_eeprom_channel { * each of 3 target output levels */ #define EEPROM_TX_POWER_MEASUREMENTS (3) -#define EEPROM_4965_TX_POWER_VERSION (2) +/* 4965 Specific */ +/* 4965 driver does not work with txpower calibration version < 5 */ +#define EEPROM_4965_TX_POWER_VERSION (5) +#define EEPROM_4965_EEPROM_VERSION (0x2f) +#define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */ +#define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */ +#define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */ +#define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */ + +/* 5000 Specific */ +#define EEPROM_5000_TX_POWER_VERSION (4) +#define EEPROM_5000_EEPROM_VERSION (0x11A) + +/*5000 calibrations */ +#define EEPROM_5000_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION) +#define EEPROM_5000_XTAL ((2*0x128) | EEPROM_5000_CALIB_ALL) + +/* 5000 links */ +#define EEPROM_5000_LINK_HOST (2*0x64) +#define EEPROM_5000_LINK_GENERAL (2*0x65) +#define EEPROM_5000_LINK_REGULATORY (2*0x66) +#define EEPROM_5000_LINK_CALIBRATION (2*0x67) +#define EEPROM_5000_LINK_PROCESS_ADJST (2*0x68) +#define EEPROM_5000_LINK_OTHERS (2*0x69) + +/* 5000 regulatory - indirect access */ +#define EEPROM_5000_REG_SKU_ID ((0x02)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 4 bytes */ +#define EEPROM_5000_REG_BAND_1_CHANNELS ((0x08)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 28 bytes */ +#define EEPROM_5000_REG_BAND_2_CHANNELS ((0x26)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 26 bytes */ +#define EEPROM_5000_REG_BAND_3_CHANNELS ((0x42)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ +#define EEPROM_5000_REG_BAND_4_CHANNELS ((0x5C)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ +#define EEPROM_5000_REG_BAND_5_CHANNELS ((0x74)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 12 bytes */ +#define EEPROM_5000_REG_BAND_24_FAT_CHANNELS ((0x82)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ +#define EEPROM_5000_REG_BAND_52_FAT_CHANNELS ((0x92)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ -/* 4965 driver does not work with txpower calibration version < 5. - * Look for this in calib_version member of struct iwl4965_eeprom. */ -#define EEPROM_TX_POWER_VERSION_NEW (5) /* 2.4 GHz */ extern const u8 iwl_eeprom_band_1[14]; /* - * 4965 factory calibration data for one txpower level, on one channel, + * factory calibration data for one txpower level, on one channel, * measured on one of the 2 tx chains (radio transmitter and associated * antenna). EEPROM contains: * @@ -154,7 +192,7 @@ extern const u8 iwl_eeprom_band_1[14]; * * 4) RF power amplifier detector level measurement (not used). */ -struct iwl4965_eeprom_calib_measure { +struct iwl_eeprom_calib_measure { u8 temperature; /* Device temperature (Celsius) */ u8 gain_idx; /* Index into gain table */ u8 actual_pow; /* Measured RF output power, half-dBm */ @@ -163,22 +201,22 @@ struct iwl4965_eeprom_calib_measure { /* - * 4965 measurement set for one channel. EEPROM contains: + * measurement set for one channel. EEPROM contains: * * 1) Channel number measured * * 2) Measurements for each of 3 power levels for each of 2 radio transmitters * (a.k.a. "tx chains") (6 measurements altogether) */ -struct iwl4965_eeprom_calib_ch_info { +struct iwl_eeprom_calib_ch_info { u8 ch_num; - struct iwl4965_eeprom_calib_measure + struct iwl_eeprom_calib_measure measurements[EEPROM_TX_POWER_TX_CHAINS] [EEPROM_TX_POWER_MEASUREMENTS]; } __attribute__ ((packed)); /* - * 4965 txpower subband info. + * txpower subband info. * * For each frequency subband, EEPROM contains the following: * @@ -187,16 +225,16 @@ struct iwl4965_eeprom_calib_ch_info { * * 2) Sample measurement sets for 2 channels close to the range endpoints. */ -struct iwl4965_eeprom_calib_subband_info { +struct iwl_eeprom_calib_subband_info { u8 ch_from; /* channel number of lowest channel in subband */ u8 ch_to; /* channel number of highest channel in subband */ - struct iwl4965_eeprom_calib_ch_info ch1; - struct iwl4965_eeprom_calib_ch_info ch2; + struct iwl_eeprom_calib_ch_info ch1; + struct iwl_eeprom_calib_ch_info ch2; } __attribute__ ((packed)); /* - * 4965 txpower calibration info. EEPROM contains: + * txpower calibration info. EEPROM contains: * * 1) Factory-measured saturation power levels (maximum levels at which * tx power amplifier can output a signal without too much distortion). @@ -212,55 +250,58 @@ struct iwl4965_eeprom_calib_subband_info { * characteristics of the analog radio circuitry vary with frequency. * * Not all sets need to be filled with data; - * struct iwl4965_eeprom_calib_subband_info contains range of channels + * struct iwl_eeprom_calib_subband_info contains range of channels * (0 if unused) for each set of data. */ -struct iwl4965_eeprom_calib_info { +struct iwl_eeprom_calib_info { u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */ u8 saturation_power52; /* half-dBm */ s16 voltage; /* signed */ - struct iwl4965_eeprom_calib_subband_info + struct iwl_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS]; } __attribute__ ((packed)); - -/* - * 4965 EEPROM map - */ -struct iwl4965_eeprom { - u8 reserved0[16]; - u16 device_id; /* abs.ofs: 16 */ - u8 reserved1[2]; - u16 pmc; /* abs.ofs: 20 */ - u8 reserved2[20]; - u8 mac_address[6]; /* abs.ofs: 42 */ - u8 reserved3[58]; - u16 board_revision; /* abs.ofs: 106 */ - u8 reserved4[11]; - u8 board_pba_number[9]; /* abs.ofs: 119 */ - u8 reserved5[8]; - u16 version; /* abs.ofs: 136 */ - u8 sku_cap; /* abs.ofs: 138 */ - u8 leds_mode; /* abs.ofs: 139 */ - u16 oem_mode; - u16 wowlan_mode; /* abs.ofs: 142 */ - u16 leds_time_interval; /* abs.ofs: 144 */ - u8 leds_off_time; /* abs.ofs: 146 */ - u8 leds_on_time; /* abs.ofs: 147 */ - u8 almgor_m_version; /* abs.ofs: 148 */ - u8 antenna_switch_type; /* abs.ofs: 149 */ - u8 reserved6[8]; - u16 board_revision_4965; /* abs.ofs: 158 */ - u8 reserved7[13]; - u8 board_pba_number_4965[9]; /* abs.ofs: 173 */ - u8 reserved8[10]; - u8 sku_id[4]; /* abs.ofs: 192 */ +#define ADDRESS_MSK 0x0000FFFF +#define INDIRECT_TYPE_MSK 0x000F0000 +#define INDIRECT_HOST 0x00010000 +#define INDIRECT_GENERAL 0x00020000 +#define INDIRECT_REGULATORY 0x00030000 +#define INDIRECT_CALIBRATION 0x00040000 +#define INDIRECT_PROCESS_ADJST 0x00050000 +#define INDIRECT_OTHERS 0x00060000 +#define INDIRECT_ADDRESS 0x00100000 + +/* General */ +#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ +#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ +#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ +#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ +#define EEPROM_VERSION (2*0x44) /* 2 bytes */ +#define EEPROM_SKU_CAP (2*0x45) /* 1 bytes */ +#define EEPROM_LEDS_MODE (2*0x45+1) /* 1 bytes */ +#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ +#define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */ +#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ +#define EEPROM_3945_M_VERSION (2*0x4A) /* 1 bytes */ +#define EEPROM_ANTENNA_SWITCH_TYPE (2*0x4A+1) /* 1 bytes */ + +/* The following masks are to be applied on EEPROM_RADIO_CONFIG */ +#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ +#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ +#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ +#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ +#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ +#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ + +#define EEPROM_3945_RF_CFG_TYPE_MAX 0x0 +#define EEPROM_4965_RF_CFG_TYPE_MAX 0x1 +#define EEPROM_5000_RF_CFG_TYPE_MAX 0x3 /* * Per-channel regulatory data. * - * Each channel that *might* be supported by 3945 or 4965 has a fixed location + * Each channel that *might* be supported by iwl has a fixed location * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory * txpower (MSB). * @@ -269,40 +310,38 @@ struct iwl4965_eeprom { * * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 */ - u16 band_1_count; /* abs.ofs: 196 */ - struct iwl4965_eeprom_channel band_1_channels[14]; /* abs.ofs: 196 */ +#define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */ +#define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */ /* * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196, * 5.0 GHz channels 7, 8, 11, 12, 16 * (4915-5080MHz) (none of these is ever supported) */ - u16 band_2_count; /* abs.ofs: 226 */ - struct iwl4965_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */ +#define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */ /* * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 * (5170-5320MHz) */ - u16 band_3_count; /* abs.ofs: 254 */ - struct iwl4965_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */ +#define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */ /* * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 * (5500-5700MHz) */ - u16 band_4_count; /* abs.ofs: 280 */ - struct iwl4965_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */ +#define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */ /* * 5.7 GHz channels 145, 149, 153, 157, 161, 165 * (5725-5825MHz) */ - u16 band_5_count; /* abs.ofs: 304 */ - struct iwl4965_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */ - - u8 reserved10[2]; - +#define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */ /* * 2.4 GHz FAT channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11) @@ -319,52 +358,35 @@ struct iwl4965_eeprom { * * NOTE: 4965 does not support FAT channels on 2.4 GHz. */ - struct iwl4965_eeprom_channel band_24_channels[7]; /* abs.ofs: 320 */ - u8 reserved11[2]; +#define EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS (2*0xA0) /* 14 bytes */ /* * 5.2 GHz FAT channels 36 (40), 44 (48), 52 (56), 60 (64), * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161) */ - struct iwl4965_eeprom_channel band_52_channels[11]; /* abs.ofs: 336 */ - u8 reserved12[6]; - -/* - * 4965 driver requires txpower calibration format version 5 or greater. - * Driver does not work with txpower calibration version < 5. - * This value is simply a 16-bit number, no major/minor versions here. - */ - u16 calib_version; /* abs.ofs: 364 */ - u8 reserved13[2]; - u8 reserved14[96]; /* abs.ofs: 368 */ - -/* - * 4965 Txpower calibration data. - */ - struct iwl4965_eeprom_calib_info calib_info; /* abs.ofs: 464 */ - - u8 reserved16[140]; /* fill out to full 1024 byte block */ - - -} __attribute__ ((packed)); - -#define IWL_EEPROM_IMAGE_SIZE 1024 - -/* End of EEPROM */ +#define EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS (2*0xA8) /* 22 bytes */ struct iwl_eeprom_ops { + const u32 regulatory_bands[7]; int (*verify_signature) (struct iwl_priv *priv); int (*acquire_semaphore) (struct iwl_priv *priv); void (*release_semaphore) (struct iwl_priv *priv); + int (*check_version) (struct iwl_priv *priv); + const u8* (*query_addr) (const struct iwl_priv *priv, size_t offset); }; void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac); int iwl_eeprom_init(struct iwl_priv *priv); +void iwl_eeprom_free(struct iwl_priv *priv); +int iwl_eeprom_check_version(struct iwl_priv *priv); +const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset); +u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset); int iwlcore_eeprom_verify_signature(struct iwl_priv *priv); int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv); void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv); +const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset); int iwl_init_channel_map(struct iwl_priv *priv); void iwl_free_channel_map(struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h new file mode 100644 index 0000000..cd11c0c --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -0,0 +1,392 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +/****************************/ +/* Flow Handler Definitions */ +/****************************/ + +/** + * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) + * Addresses are offsets from device's PCI hardware base address. + */ +#define FH_MEM_LOWER_BOUND (0x1000) +#define FH_MEM_UPPER_BOUND (0x1EF0) + +/** + * Keep-Warm (KW) buffer base address. + * + * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the + * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency + * DRAM access when 4965 is Txing or Rxing. The dummy accesses prevent host + * from going into a power-savings mode that would cause higher DRAM latency, + * and possible data over/under-runs, before all Tx/Rx is complete. + * + * Driver loads FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) + * of the buffer, which must be 4K aligned. Once this is set up, the 4965 + * automatically invokes keep-warm accesses when normal accesses might not + * be sufficient to maintain fast DRAM response. + * + * Bit fields: + * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned + */ +#define FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) + + +/** + * TFD Circular Buffers Base (CBBC) addresses + * + * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident + * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) + * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 + * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte + * aligned (address bits 0-7 must be 0). + * + * Bit fields in each pointer register: + * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned + */ +#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) + +/* Find TFD CB base pointer for given queue (range 0-15). */ +#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) + + +/** + * Rx SRAM Control and Status Registers (RSCSR) + * + * These registers provide handshake between driver and 4965 for the Rx queue + * (this queue handles *all* command responses, notifications, Rx data, etc. + * sent from 4965 uCode to host driver). Unlike Tx, there is only one Rx + * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can + * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer + * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 + * mapping between RBDs and RBs. + * + * Driver must allocate host DRAM memory for the following, and set the + * physical address of each into 4965 registers: + * + * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 + * entries (although any power of 2, up to 4096, is selectable by driver). + * Each entry (1 dword) points to a receive buffer (RB) of consistent size + * (typically 4K, although 8K or 16K are also selectable by driver). + * Driver sets up RB size and number of RBDs in the CB via Rx config + * register FH_MEM_RCSR_CHNL0_CONFIG_REG. + * + * Bit fields within one RBD: + * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned + * + * Driver sets physical address [35:8] of base of RBD circular buffer + * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. + * + * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers + * (RBs) have been filled, via a "write pointer", actually the index of + * the RB's corresponding RBD within the circular buffer. Driver sets + * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. + * + * Bit fields in lower dword of Rx status buffer (upper dword not used + * by driver; see struct iwl4965_shared, val0): + * 31-12: Not used by driver + * 11- 0: Index of last filled Rx buffer descriptor + * (4965 writes, driver reads this value) + * + * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must + * enter pointers to these RBs into contiguous RBD circular buffer entries, + * and update the 4965's "write" index register, + * FH_RSCSR_CHNL0_RBDCB_WPTR_REG. + * + * This "write" index corresponds to the *next* RBD that the driver will make + * available, i.e. one RBD past the tail of the ready-to-fill RBDs within + * the circular buffer. This value should initially be 0 (before preparing any + * RBs), should be 8 after preparing the first 8 RBs (for example), and must + * wrap back to 0 at the end of the circular buffer (but don't wrap before + * "read" index has advanced past 1! See below). + * NOTE: 4965 EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. + * + * As the 4965 fills RBs (referenced from contiguous RBDs within the circular + * buffer), it updates the Rx status buffer in host DRAM, 2) described above, + * to tell the driver the index of the latest filled RBD. The driver must + * read this "read" index from DRAM after receiving an Rx interrupt from 4965. + * + * The driver must also internally keep track of a third index, which is the + * next RBD to process. When receiving an Rx interrupt, driver should process + * all filled but unprocessed RBs up to, but not including, the RB + * corresponding to the "read" index. For example, if "read" index becomes "1", + * driver may process the RB pointed to by RBD 0. Depending on volume of + * traffic, there may be many RBs to process. + * + * If read index == write index, 4965 thinks there is no room to put new data. + * Due to this, the maximum number of filled RBs is 255, instead of 256. To + * be safe, make sure that there is a gap of at least 2 RBDs between "write" + * and "read" indexes; that is, make sure that there are no more than 254 + * buffers waiting to be filled. + */ +#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) +#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) + +/** + * Physical base address of 8-byte Rx Status buffer. + * Bit fields: + * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. + */ +#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) + +/** + * Physical base address of Rx Buffer Descriptor Circular Buffer. + * Bit fields: + * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. + */ +#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) + +/** + * Rx write pointer (index, really!). + * Bit fields: + * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. + * NOTE: For 256-entry circular buffer, use only bits [7:0]. + */ +#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) +#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) + + +/** + * Rx Config/Status Registers (RCSR) + * Rx Config Reg for channel 0 (only channel used) + * + * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for + * normal operation (see bit fields). + * + * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. + * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for + * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. + * + * Bit fields: + * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29-24: reserved + * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), + * min "5" for 32 RBDs, max "12" for 4096 RBDs. + * 19-18: reserved + * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, + * '10' 12K, '11' 16K. + * 15-14: reserved + * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) + * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) + * typical value 0x10 (about 1/2 msec) + * 3- 0: reserved + */ +#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) +#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) + +#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) + +#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ +#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ +#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ +#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ +#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ + +#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT (20) +#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_BITSHIFT (4) +#define RX_RB_TIMEOUT (0x10) + +#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) +#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) +#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) + +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) + +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) + + +/** + * Rx Shared Status Registers (RSSR) + * + * After stopping Rx DMA channel (writing 0 to + * FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll + * FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. + * + * Bit fields: + * 24: 1 = Channel 0 is idle + * + * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV + * contain default values that should not be altered by the driver. + */ +#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) +#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) + +#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) +#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) +#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ + (FH_MEM_RSSR_LOWER_BOUND + 0x008) + +#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) + +#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 + +/** + * Transmit DMA Channel Control/Status Registers (TCSR) + * + * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels + * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, + * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. + * + * To use a Tx DMA channel, driver must initialize its + * FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: + * + * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL + * + * All other bits should be 0. + * + * Bit fields: + * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29- 4: Reserved, set to "0" + * 3: Enable internal DMA requests (1, normal operation), disable (0) + * 2- 0: Reserved, set to "0" + */ +#define FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) +#define FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) + +/* Find Control/Status reg for given Tx DMA/FIFO channel */ +#define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * _chnl) + +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL (0x00000008) + +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) + +#define FH_TCSR_CHNL_NUM (7) + +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) + +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) + +#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) +#define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * _chnl) +#define FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * _chnl + 0x4) +#define FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * _chnl + 0x8) + +/** + * Tx Shared Status Registers (TSSR) + * + * After stopping Tx DMA channel (writing 0 to + * FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll + * FH_TSSR_TX_STATUS_REG until selected Tx channel is idle + * (channel's buffers empty | no pending requests). + * + * Bit fields: + * 31-24: 1 = Channel buffers empty (channel 7:0) + * 23-16: 1 = No pending requests (channel 7:0) + */ +#define FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) +#define FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) + +#define FH_TSSR_TX_STATUS_REG (FH_TSSR_LOWER_BOUND + 0x010) + +#define FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) ((1 << (_chnl)) << 24) +#define FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl) ((1 << (_chnl)) << 16) + +#define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) \ + (FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) | \ + FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl)) + + + +#define FH_REGS_LOWER_BOUND (0x1000) +#define FH_REGS_UPPER_BOUND (0x2000) + +/* Tx service channels */ +#define FH_SRVC_CHNL (9) +#define FH_SRVC_LOWER_BOUND (FH_REGS_LOWER_BOUND + 0x9C8) +#define FH_SRVC_UPPER_BOUND (FH_REGS_LOWER_BOUND + 0x9D0) +#define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ + (FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) + +/* TFDB Area - TFDs buffer table */ +#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) +#define FH_TFDIB_LOWER_BOUND (FH_REGS_LOWER_BOUND + 0x900) +#define FH_TFDIB_UPPER_BOUND (FH_REGS_LOWER_BOUND + 0x958) +#define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) +#define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) + +/* TCSR: tx_config register values */ +#define FH_RSCSR_FRAME_SIZE_MSK (0x00003FFF) /* bits 0-13 */ + diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index fdb27f1..6512834 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -31,7 +31,7 @@ #include <linux/version.h> #include <net/mac80211.h> -#include "iwl-4965.h" /* FIXME: remove */ +#include "iwl-dev.h" /* FIXME: remove */ #include "iwl-debug.h" #include "iwl-eeprom.h" #include "iwl-core.h" @@ -56,6 +56,7 @@ const char *get_cmd_string(u8 cmd) IWL_CMD(REPLY_RATE_SCALE); IWL_CMD(REPLY_LEDS_CMD); IWL_CMD(REPLY_TX_LINK_QUALITY_CMD); + IWL_CMD(COEX_PRIORITY_TABLE_CMD); IWL_CMD(RADAR_NOTIFICATION); IWL_CMD(REPLY_QUIET_CMD); IWL_CMD(REPLY_CHANNEL_SWITCH); @@ -89,6 +90,10 @@ const char *get_cmd_string(u8 cmd) IWL_CMD(REPLY_RX_MPDU_CMD); IWL_CMD(REPLY_RX); IWL_CMD(REPLY_COMPRESSED_BA); + IWL_CMD(CALIBRATION_CFG_CMD); + IWL_CMD(CALIBRATION_RES_NOTIFICATION); + IWL_CMD(CALIBRATION_COMPLETE_NOTIFICATION); + IWL_CMD(REPLY_TX_POWER_DBM_CMD); default: return "UNKNOWN"; @@ -101,7 +106,7 @@ EXPORT_SYMBOL(get_cmd_string); static int iwl_generic_cmd_callback(struct iwl_priv *priv, struct iwl_cmd *cmd, struct sk_buff *skb) { - struct iwl4965_rx_packet *pkt = NULL; + struct iwl_rx_packet *pkt = NULL; if (!skb) { IWL_ERROR("Error: Response NULL in %s.\n", @@ -109,7 +114,7 @@ static int iwl_generic_cmd_callback(struct iwl_priv *priv, return 1; } - pkt = (struct iwl4965_rx_packet *)skb->data; + pkt = (struct iwl_rx_packet *)skb->data; if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { IWL_ERROR("Bad return from %s (0x%08X)\n", get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags); @@ -139,7 +144,7 @@ static int iwl_send_cmd_async(struct iwl_priv *priv, struct iwl_host_cmd *cmd) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return -EBUSY; - ret = priv->cfg->ops->utils->enqueue_hcmd(priv, cmd); + ret = iwl_enqueue_hcmd(priv, cmd); if (ret < 0) { IWL_ERROR("Error sending %s: enqueue_hcmd failed: %d\n", get_cmd_string(cmd->id), ret); @@ -170,7 +175,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd) if (cmd->meta.flags & CMD_WANT_SKB) cmd->meta.source = &cmd->meta; - cmd_idx = priv->cfg->ops->utils->enqueue_hcmd(priv, cmd); + cmd_idx = iwl_enqueue_hcmd(priv, cmd); if (cmd_idx < 0) { ret = cmd_idx; IWL_ERROR("Error sending %s: enqueue_hcmd failed: %d\n", @@ -223,7 +228,7 @@ cancel: * TX cmd queue. Otherwise in case the cmd comes * in later, it will possibly set an invalid * address (cmd->meta.source). */ - qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx]; + qcmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx]; qcmd->meta.flags &= ~CMD_WANT_SKB; } fail: diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h index a443472..41eed67 100644 --- a/drivers/net/wireless/iwlwifi/iwl-helpers.h +++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h @@ -136,8 +136,8 @@ static inline void iwl_set_bits16(__le16 *dst, u8 pos, u8 len, int val) #define KELVIN_TO_CELSIUS(x) ((x)-273) #define CELSIUS_TO_KELVIN(x) ((x)+273) +#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) -#define IEEE80211_CHAN_W_RADAR_DETECT 0x00000010 static inline struct ieee80211_conf *ieee80211_get_hw_conf( struct ieee80211_hw *hw) @@ -145,96 +145,6 @@ static inline struct ieee80211_conf *ieee80211_get_hw_conf( return &hw->conf; } -#define QOS_CONTROL_LEN 2 - - -static inline int ieee80211_is_management(u16 fc) -{ - return (fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT; -} - -static inline int ieee80211_is_control(u16 fc) -{ - return (fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL; -} - -static inline int ieee80211_is_data(u16 fc) -{ - return (fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA; -} - -static inline int ieee80211_is_back_request(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BACK_REQ); -} - -static inline int ieee80211_is_probe_response(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP); -} - -static inline int ieee80211_is_probe_request(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_REQ); -} - -static inline int ieee80211_is_beacon(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON); -} - -static inline int ieee80211_is_atim(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ATIM); -} - -static inline int ieee80211_is_assoc_request(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ); -} - -static inline int ieee80211_is_assoc_response(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_RESP); -} - -static inline int ieee80211_is_auth(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ); -} - -static inline int ieee80211_is_deauth(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ); -} - -static inline int ieee80211_is_disassoc(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ); -} - -static inline int ieee80211_is_reassoc_request(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ); -} - -static inline int ieee80211_is_reassoc_response(u16 fc) -{ - return ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_RESP); -} - static inline int iwl_check_bits(unsigned long field, unsigned long mask) { return ((field & mask) == mask) ? 1 : 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 5bc3df4..08350a7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -30,6 +30,7 @@ #define __iwl_io_h__ #include <linux/io.h> +#include <linux/delay.h> #include "iwl-debug.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 03fdf5b..cb11c4a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -39,19 +39,26 @@ #include <linux/etherdevice.h> #include <asm/unaligned.h> -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-io.h" #include "iwl-helpers.h" -#define IWL_1MB_RATE (128 * 1024) -#define IWL_LED_THRESHOLD (16) -#define IWL_MAX_BLINK_TBL (10) +#ifdef CONFIG_IWLWIFI_DEBUG +static const char *led_type_str[] = { + __stringify(IWL_LED_TRG_TX), + __stringify(IWL_LED_TRG_RX), + __stringify(IWL_LED_TRG_ASSOC), + __stringify(IWL_LED_TRG_RADIO), + NULL +}; +#endif /* CONFIG_IWLWIFI_DEBUG */ + static const struct { u16 tpt; u8 on_time; - u8 of_time; + u8 off_time; } blink_tbl[] = { {300, 25, 25}, @@ -63,26 +70,31 @@ static const struct { {15, 95, 95 }, {10, 110, 110}, {5, 130, 130}, - {0, 167, 167} + {0, 167, 167}, +/* SOLID_ON */ + {-1, IWL_LED_SOLID, 0} }; -static int iwl_led_cmd_callback(struct iwl_priv *priv, - struct iwl_cmd *cmd, struct sk_buff *skb) +#define IWL_1MB_RATE (128 * 1024) +#define IWL_LED_THRESHOLD (16) +#define IWL_MAX_BLINK_TBL (ARRAY_SIZE(blink_tbl) - 1) /* exclude SOLID_ON */ +#define IWL_SOLID_BLINK_IDX (ARRAY_SIZE(blink_tbl) - 1) + +/* [0-256] -> [0..8] FIXME: we need [0..10] */ +static inline int iwl_brightness_to_idx(enum led_brightness brightness) { - return 1; + return fls(0x000000FF & (u32)brightness); } - /* Send led command */ -static int iwl_send_led_cmd(struct iwl_priv *priv, - struct iwl4965_led_cmd *led_cmd) +static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd) { struct iwl_host_cmd cmd = { .id = REPLY_LEDS_CMD, - .len = sizeof(struct iwl4965_led_cmd), + .len = sizeof(struct iwl_led_cmd), .data = led_cmd, .meta.flags = CMD_ASYNC, - .meta.u.callback = iwl_led_cmd_callback + .meta.u.callback = NULL, }; u32 reg; @@ -93,33 +105,20 @@ static int iwl_send_led_cmd(struct iwl_priv *priv, return iwl_send_cmd(priv, &cmd); } - -/* Set led on command */ -static int iwl4965_led_on(struct iwl_priv *priv, int led_id) -{ - struct iwl4965_led_cmd led_cmd = { - .id = led_id, - .on = IWL_LED_SOLID, - .off = 0, - .interval = IWL_DEF_LED_INTRVL - }; - return iwl_send_led_cmd(priv, &led_cmd); -} - -/* Set led on command */ +/* Set led pattern command */ static int iwl4965_led_pattern(struct iwl_priv *priv, int led_id, - enum led_brightness brightness) + unsigned int idx) { - struct iwl4965_led_cmd led_cmd = { + struct iwl_led_cmd led_cmd = { .id = led_id, - .on = brightness, - .off = brightness, .interval = IWL_DEF_LED_INTRVL }; - if (brightness == LED_FULL) { - led_cmd.on = IWL_LED_SOLID; - led_cmd.off = 0; - } + + BUG_ON(idx > IWL_MAX_BLINK_TBL); + + led_cmd.on = blink_tbl[idx].on_time; + led_cmd.off = blink_tbl[idx].off_time; + return iwl_send_led_cmd(priv, &led_cmd); } @@ -132,10 +131,22 @@ static int iwl4965_led_on_reg(struct iwl_priv *priv, int led_id) } #if 0 +/* Set led on command */ +static int iwl4965_led_on(struct iwl_priv *priv, int led_id) +{ + struct iwl_led_cmd led_cmd = { + .id = led_id, + .on = IWL_LED_SOLID, + .off = 0, + .interval = IWL_DEF_LED_INTRVL + }; + return iwl_send_led_cmd(priv, &led_cmd); +} + /* Set led off command */ int iwl4965_led_off(struct iwl_priv *priv, int led_id) { - struct iwl4965_led_cmd led_cmd = { + struct iwl_led_cmd led_cmd = { .id = led_id, .on = 0, .off = 0, @@ -150,30 +161,35 @@ int iwl4965_led_off(struct iwl_priv *priv, int led_id) /* Set led register off */ static int iwl4965_led_off_reg(struct iwl_priv *priv, int led_id) { - IWL_DEBUG_LED("radio off\n"); + IWL_DEBUG_LED("LED Reg off\n"); iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF); return 0; } -/* Set led blink command */ -static int iwl4965_led_not_solid(struct iwl_priv *priv, int led_id, - u8 brightness) +/* + * Set led register in case of disassociation according to rfkill state + */ +static int iwl_led_associate(struct iwl_priv *priv, int led_id) { - struct iwl4965_led_cmd led_cmd = { - .id = led_id, - .on = brightness, - .off = brightness, - .interval = IWL_DEF_LED_INTRVL - }; - - return iwl_send_led_cmd(priv, &led_cmd); + IWL_DEBUG_LED("Associated\n"); + priv->allow_blinking = 1; + return iwl4965_led_on_reg(priv, led_id); } +static int iwl_led_disassociate(struct iwl_priv *priv, int led_id) +{ + priv->allow_blinking = 0; + if (iwl_is_rfkill(priv)) + iwl4965_led_off_reg(priv, led_id); + else + iwl4965_led_on_reg(priv, led_id); + return 0; +} /* * brightness call back function for Tx/Rx LED */ -static int iwl4965_led_associated(struct iwl_priv *priv, int led_id) +static int iwl_led_associated(struct iwl_priv *priv, int led_id) { if (test_bit(STATUS_EXIT_PENDING, &priv->status) || !test_bit(STATUS_READY, &priv->status)) @@ -189,34 +205,32 @@ static int iwl4965_led_associated(struct iwl_priv *priv, int led_id) /* * brightness call back for association and radio */ -static void iwl4965_led_brightness_set(struct led_classdev *led_cdev, +static void iwl_led_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { - struct iwl4965_led *led = container_of(led_cdev, - struct iwl4965_led, led_dev); + struct iwl_led *led = container_of(led_cdev, struct iwl_led, led_dev); struct iwl_priv *priv = led->priv; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; + + IWL_DEBUG_LED("Led type = %s brightness = %d\n", + led_type_str[led->type], brightness); switch (brightness) { case LED_FULL: - if (led->type == IWL_LED_TRG_ASSOC) - priv->allow_blinking = 1; - if (led->led_on) led->led_on(priv, IWL_LED_LINK); break; case LED_OFF: - if (led->type == IWL_LED_TRG_ASSOC) - priv->allow_blinking = 0; - if (led->led_off) led->led_off(priv, IWL_LED_LINK); break; default: - if (led->led_pattern) - led->led_pattern(priv, IWL_LED_LINK, brightness); + if (led->led_pattern) { + int idx = iwl_brightness_to_idx(brightness); + led->led_pattern(priv, IWL_LED_LINK, idx); + } break; } } @@ -226,16 +240,15 @@ static void iwl4965_led_brightness_set(struct led_classdev *led_cdev, /* * Register led class with the system */ -static int iwl_leds_register_led(struct iwl_priv *priv, - struct iwl4965_led *led, +static int iwl_leds_register_led(struct iwl_priv *priv, struct iwl_led *led, enum led_type type, u8 set_led, - const char *name, char *trigger) + char *trigger) { struct device *device = wiphy_dev(priv->hw->wiphy); int ret; - led->led_dev.name = name; - led->led_dev.brightness_set = iwl4965_led_brightness_set; + led->led_dev.name = led->name; + led->led_dev.brightness_set = iwl_led_brightness_set; led->led_dev.default_trigger = trigger; led->priv = priv; @@ -259,38 +272,30 @@ static int iwl_leds_register_led(struct iwl_priv *priv, /* * calculate blink rate according to last 2 sec Tx/Rx activities */ -static inline u8 get_blink_rate(struct iwl_priv *priv) +static int iwl_get_blink_rate(struct iwl_priv *priv) { int i; - u8 blink_rate; - u64 current_tpt = priv->tx_stats[2].bytes + priv->rx_stats[2].bytes; + u64 current_tpt = priv->tx_stats[2].bytes; + /* FIXME: + priv->rx_stats[2].bytes; */ s64 tpt = current_tpt - priv->led_tpt; if (tpt < 0) /* wrapparound */ tpt = -tpt; + IWL_DEBUG_LED("tpt %lld current_tpt %llu\n", + (long long)tpt, + (unsigned long long)current_tpt); priv->led_tpt = current_tpt; - if (tpt < IWL_LED_THRESHOLD) { + if (!priv->allow_blinking) i = IWL_MAX_BLINK_TBL; - } else { + else for (i = 0; i < IWL_MAX_BLINK_TBL; i++) if (tpt > (blink_tbl[i].tpt * IWL_1MB_RATE)) break; - } - /* if 0 frame is transfered */ - if ((i == IWL_MAX_BLINK_TBL) || !priv->allow_blinking) - blink_rate = IWL_LED_SOLID; - else - blink_rate = blink_tbl[i].on_time; - - return blink_rate; -} -static inline int is_rf_kill(struct iwl_priv *priv) -{ - return test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status); + IWL_DEBUG_LED("LED BLINK IDX=%d", i); + return i; } /* @@ -300,22 +305,23 @@ static inline int is_rf_kill(struct iwl_priv *priv) */ void iwl_leds_background(struct iwl_priv *priv) { - u8 blink_rate; + u8 blink_idx; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { priv->last_blink_time = 0; return; } - if (is_rf_kill(priv)) { + if (iwl_is_rfkill(priv)) { priv->last_blink_time = 0; return; } if (!priv->allow_blinking) { priv->last_blink_time = 0; - if (priv->last_blink_rate != IWL_LED_SOLID) { - priv->last_blink_rate = IWL_LED_SOLID; - iwl4965_led_on(priv, IWL_LED_LINK); + if (priv->last_blink_rate != IWL_SOLID_BLINK_IDX) { + priv->last_blink_rate = IWL_SOLID_BLINK_IDX; + iwl4965_led_pattern(priv, IWL_LED_LINK, + IWL_SOLID_BLINK_IDX); } return; } @@ -324,21 +330,14 @@ void iwl_leds_background(struct iwl_priv *priv) msecs_to_jiffies(1000))) return; - blink_rate = get_blink_rate(priv); + blink_idx = iwl_get_blink_rate(priv); /* call only if blink rate change */ - if (blink_rate != priv->last_blink_rate) { - if (blink_rate != IWL_LED_SOLID) { - priv->last_blink_time = jiffies + - msecs_to_jiffies(1000); - iwl4965_led_not_solid(priv, IWL_LED_LINK, blink_rate); - } else { - priv->last_blink_time = 0; - iwl4965_led_on(priv, IWL_LED_LINK); - } - } + if (blink_idx != priv->last_blink_rate) + iwl4965_led_pattern(priv, IWL_LED_LINK, blink_idx); - priv->last_blink_rate = blink_rate; + priv->last_blink_time = jiffies; + priv->last_blink_rate = blink_idx; } EXPORT_SYMBOL(iwl_leds_background); @@ -346,7 +345,6 @@ EXPORT_SYMBOL(iwl_leds_background); int iwl_leds_register(struct iwl_priv *priv) { char *trigger; - char name[32]; int ret; priv->last_blink_rate = 0; @@ -355,62 +353,60 @@ int iwl_leds_register(struct iwl_priv *priv) priv->allow_blinking = 0; trigger = ieee80211_get_radio_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:radio", + snprintf(priv->led[IWL_LED_TRG_RADIO].name, + sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio", wiphy_name(priv->hw->wiphy)); priv->led[IWL_LED_TRG_RADIO].led_on = iwl4965_led_on_reg; priv->led[IWL_LED_TRG_RADIO].led_off = iwl4965_led_off_reg; priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL; - ret = iwl_leds_register_led(priv, - &priv->led[IWL_LED_TRG_RADIO], - IWL_LED_TRG_RADIO, 1, - name, trigger); + ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RADIO], + IWL_LED_TRG_RADIO, 1, trigger); if (ret) goto exit_fail; trigger = ieee80211_get_assoc_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:assoc", + snprintf(priv->led[IWL_LED_TRG_ASSOC].name, + sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc", wiphy_name(priv->hw->wiphy)); - ret = iwl_leds_register_led(priv, - &priv->led[IWL_LED_TRG_ASSOC], - IWL_LED_TRG_ASSOC, 0, - name, trigger); + ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC], + IWL_LED_TRG_ASSOC, 0, trigger); + /* for assoc always turn led on */ - priv->led[IWL_LED_TRG_ASSOC].led_on = iwl4965_led_on_reg; - priv->led[IWL_LED_TRG_ASSOC].led_off = iwl4965_led_on_reg; + priv->led[IWL_LED_TRG_ASSOC].led_on = iwl_led_associate; + priv->led[IWL_LED_TRG_ASSOC].led_off = iwl_led_disassociate; priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL; if (ret) goto exit_fail; trigger = ieee80211_get_rx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:RX", + snprintf(priv->led[IWL_LED_TRG_RX].name, + sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX", wiphy_name(priv->hw->wiphy)); + ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RX], + IWL_LED_TRG_RX, 0, trigger); - ret = iwl_leds_register_led(priv, - &priv->led[IWL_LED_TRG_RX], - IWL_LED_TRG_RX, 0, - name, trigger); - - priv->led[IWL_LED_TRG_RX].led_on = iwl4965_led_associated; - priv->led[IWL_LED_TRG_RX].led_off = iwl4965_led_associated; + priv->led[IWL_LED_TRG_RX].led_on = iwl_led_associated; + priv->led[IWL_LED_TRG_RX].led_off = iwl_led_associated; priv->led[IWL_LED_TRG_RX].led_pattern = iwl4965_led_pattern; if (ret) goto exit_fail; trigger = ieee80211_get_tx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:TX", + snprintf(priv->led[IWL_LED_TRG_TX].name, + sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX", wiphy_name(priv->hw->wiphy)); - ret = iwl_leds_register_led(priv, - &priv->led[IWL_LED_TRG_TX], - IWL_LED_TRG_TX, 0, - name, trigger); - priv->led[IWL_LED_TRG_TX].led_on = iwl4965_led_associated; - priv->led[IWL_LED_TRG_TX].led_off = iwl4965_led_associated; + + ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_TX], + IWL_LED_TRG_TX, 0, trigger); + + priv->led[IWL_LED_TRG_TX].led_on = iwl_led_associated; + priv->led[IWL_LED_TRG_TX].led_off = iwl_led_associated; priv->led[IWL_LED_TRG_TX].led_pattern = iwl4965_led_pattern; if (ret) @@ -425,7 +421,7 @@ exit_fail: EXPORT_SYMBOL(iwl_leds_register); /* unregister led class */ -static void iwl_leds_unregister_led(struct iwl4965_led *led, u8 set_led) +static void iwl_leds_unregister_led(struct iwl_led *led, u8 set_led) { if (!led->registered) return; diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h index 5bb0412..588c9ad 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.h +++ b/drivers/net/wireless/iwlwifi/iwl-led.h @@ -49,14 +49,14 @@ enum led_type { }; -struct iwl4965_led { +struct iwl_led { struct iwl_priv *priv; struct led_classdev led_dev; + char name[32]; int (*led_on) (struct iwl_priv *priv, int led_id); int (*led_off) (struct iwl_priv *priv, int led_id); - int (*led_pattern) (struct iwl_priv *priv, int led_id, - enum led_brightness brightness); + int (*led_pattern) (struct iwl_priv *priv, int led_id, unsigned int idx); enum led_type type; unsigned int registered; diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c new file mode 100644 index 0000000..a464ed4 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -0,0 +1,429 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> + +#include <net/mac80211.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-commands.h" +#include "iwl-debug.h" +#include "iwl-power.h" +#include "iwl-helpers.h" + +/* + * Setting power level allow the card to go to sleep when not busy + * there are three factor that decide the power level to go to, they + * are list here with its priority + * 1- critical_power_setting this will be set according to card temperature. + * 2- system_power_setting this will be set by system PM manager. + * 3- user_power_setting this will be set by user either by writing to sys or + * mac80211 + * + * if system_power_setting and user_power_setting is set to auto + * the power level will be decided according to association status and battery + * status. + * + */ + +#define MSEC_TO_USEC 1024 +#define IWL_POWER_RANGE_0_MAX (2) +#define IWL_POWER_RANGE_1_MAX (10) + + +#define NOSLP __constant_cpu_to_le16(0), 0, 0 +#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 +#define SLP_TOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC) +#define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \ + __constant_cpu_to_le32(X1), \ + __constant_cpu_to_le32(X2), \ + __constant_cpu_to_le32(X3), \ + __constant_cpu_to_le32(X4)} + +#define IWL_POWER_ON_BATTERY IWL_POWER_INDEX_5 +#define IWL_POWER_ON_AC_DISASSOC IWL_POWER_MODE_CAM +#define IWL_POWER_ON_AC_ASSOC IWL_POWER_MODE_CAM + + +#define IWL_CT_KILL_TEMPERATURE 110 +#define IWL_MIN_POWER_TEMPERATURE 100 +#define IWL_REDUCED_POWER_TEMPERATURE 95 + +/* default power management (not Tx power) table values */ +/* for tim 0-10 */ +static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = { + {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2} +}; + + +/* for tim = 3-10 */ +static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = { + {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2} +}; + +/* for tim > 11 */ +static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = { + {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} +}; + +/* set card power command */ +static int iwl_set_power(struct iwl_priv *priv, void *cmd) +{ + return iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD, + sizeof(struct iwl_powertable_cmd), + cmd, NULL); +} +/* decide the right power level according to association status + * and battery status + */ +static u16 iwl_get_auto_power_mode(struct iwl_priv *priv) +{ + u16 mode; + + switch (priv->power_data.user_power_setting) { + case IWL_POWER_AUTO: + /* if running on battery */ + if (priv->power_data.is_battery_active) + mode = IWL_POWER_ON_BATTERY; + else if (iwl_is_associated(priv)) + mode = IWL_POWER_ON_AC_ASSOC; + else + mode = IWL_POWER_ON_AC_DISASSOC; + break; + /* FIXME: remove battery and ac from here */ + case IWL_POWER_BATTERY: + mode = IWL_POWER_INDEX_3; + break; + case IWL_POWER_AC: + mode = IWL_POWER_MODE_CAM; + break; + default: + mode = priv->power_data.user_power_setting; + break; + } + return mode; +} + +/* initialize to default */ +static int iwl_power_init_handle(struct iwl_priv *priv) +{ + struct iwl_power_mgr *pow_data; + int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX; + struct iwl_powertable_cmd *cmd; + int i; + u16 pci_pm; + + IWL_DEBUG_POWER("Initialize power \n"); + + pow_data = &(priv->power_data); + + memset(pow_data, 0, sizeof(*pow_data)); + + memcpy(&pow_data->pwr_range_0[0], &range_0[0], size); + memcpy(&pow_data->pwr_range_1[0], &range_1[0], size); + memcpy(&pow_data->pwr_range_2[0], &range_2[0], size); + + pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &pci_pm); + + IWL_DEBUG_POWER("adjust power command flags\n"); + + for (i = 0; i < IWL_POWER_MAX; i++) { + cmd = &pow_data->pwr_range_0[i].cmd; + + if (pci_pm & PCI_CFG_LINK_CTRL_VAL_L0S_EN) + cmd->flags &= ~IWL_POWER_PCI_PM_MSK; + else + cmd->flags |= IWL_POWER_PCI_PM_MSK; + } + return 0; +} + +/* adjust power command according to dtim period and power level*/ +static int iwl_update_power_command(struct iwl_priv *priv, + struct iwl_powertable_cmd *cmd, + u16 mode) +{ + int ret = 0, i; + u8 skip; + u32 max_sleep = 0; + struct iwl_power_vec_entry *range; + u8 period = 0; + struct iwl_power_mgr *pow_data; + + if (mode > IWL_POWER_INDEX_5) { + IWL_DEBUG_POWER("Error invalid power mode \n"); + return -1; + } + pow_data = &(priv->power_data); + + if (pow_data->dtim_period <= IWL_POWER_RANGE_0_MAX) + range = &pow_data->pwr_range_0[0]; + else if (pow_data->dtim_period <= IWL_POWER_RANGE_1_MAX) + range = &pow_data->pwr_range_1[0]; + else + range = &pow_data->pwr_range_2[0]; + + period = pow_data->dtim_period; + memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd)); + + if (period == 0) { + period = 1; + skip = 0; + } else + skip = range[mode].no_dtim; + + if (skip == 0) { + max_sleep = period; + cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK; + } else { + __le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]; + max_sleep = le32_to_cpu(slp_itrvl); + if (max_sleep == 0xFF) + max_sleep = period * (skip + 1); + else if (max_sleep > period) + max_sleep = (le32_to_cpu(slp_itrvl) / period) * period; + cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; + } + + for (i = 0; i < IWL_POWER_VEC_SIZE; i++) { + if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep) + cmd->sleep_interval[i] = cpu_to_le32(max_sleep); + } + + IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags); + IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); + IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); + IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n", + le32_to_cpu(cmd->sleep_interval[0]), + le32_to_cpu(cmd->sleep_interval[1]), + le32_to_cpu(cmd->sleep_interval[2]), + le32_to_cpu(cmd->sleep_interval[3]), + le32_to_cpu(cmd->sleep_interval[4])); + + return ret; +} + + +/* + * calucaute the final power mode index + */ +int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) +{ + struct iwl_power_mgr *setting = &(priv->power_data); + int ret = 0; + u16 uninitialized_var(final_mode); + + /* If on battery, set to 3, + * if plugged into AC power, set to CAM ("continuously aware mode"), + * else user level */ + + switch (setting->system_power_setting) { + case IWL_POWER_SYS_AUTO: + final_mode = iwl_get_auto_power_mode(priv); + break; + case IWL_POWER_SYS_BATTERY: + final_mode = IWL_POWER_INDEX_3; + break; + case IWL_POWER_SYS_AC: + final_mode = IWL_POWER_MODE_CAM; + break; + default: + final_mode = IWL_POWER_INDEX_3; + WARN_ON(1); + } + + if (setting->critical_power_setting > final_mode) + final_mode = setting->critical_power_setting; + + /* driver only support CAM for non STA network */ + if (priv->iw_mode != IEEE80211_IF_TYPE_STA) + final_mode = IWL_POWER_MODE_CAM; + + if (!iwl_is_rfkill(priv) && !setting->power_disabled && + ((setting->power_mode != final_mode) || refresh)) { + struct iwl_powertable_cmd cmd; + + if (final_mode != IWL_POWER_MODE_CAM) + set_bit(STATUS_POWER_PMI, &priv->status); + + iwl_update_power_command(priv, &cmd, final_mode); + cmd.keep_alive_beacons = 0; + + if (final_mode == IWL_POWER_INDEX_5) + cmd.flags |= IWL_POWER_FAST_PD; + + ret = iwl_set_power(priv, &cmd); + + if (final_mode == IWL_POWER_MODE_CAM) + clear_bit(STATUS_POWER_PMI, &priv->status); + else + set_bit(STATUS_POWER_PMI, &priv->status); + + if (priv->cfg->ops->lib->update_chain_flags) + priv->cfg->ops->lib->update_chain_flags(priv); + + if (!ret) + setting->power_mode = final_mode; + } + + return ret; +} +EXPORT_SYMBOL(iwl_power_update_mode); + +/* Allow other iwl code to disable/enable power management active + * this will be usefull for rate scale to disable PM during heavy + * Tx/Rx activities + */ +int iwl_power_disable_management(struct iwl_priv *priv) +{ + u16 prev_mode; + int ret = 0; + + if (priv->power_data.power_disabled) + return -EBUSY; + + prev_mode = priv->power_data.user_power_setting; + priv->power_data.user_power_setting = IWL_POWER_MODE_CAM; + ret = iwl_power_update_mode(priv, 0); + priv->power_data.power_disabled = 1; + priv->power_data.user_power_setting = prev_mode; + + return ret; +} +EXPORT_SYMBOL(iwl_power_disable_management); + +/* Allow other iwl code to disable/enable power management active + * this will be usefull for rate scale to disable PM during hight + * valume activities + */ +int iwl_power_enable_management(struct iwl_priv *priv) +{ + int ret = 0; + + priv->power_data.power_disabled = 0; + ret = iwl_power_update_mode(priv, 0); + return ret; +} +EXPORT_SYMBOL(iwl_power_enable_management); + +/* set user_power_setting */ +int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode) +{ + int ret = 0; + + if (mode > IWL_POWER_LIMIT) + return -EINVAL; + + priv->power_data.user_power_setting = mode; + + ret = iwl_power_update_mode(priv, 0); + + return ret; +} +EXPORT_SYMBOL(iwl_power_set_user_mode); + + +/* set system_power_setting. This should be set by over all + * PM application. + */ +int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode) +{ + int ret = 0; + + if (mode > IWL_POWER_LIMIT) + return -EINVAL; + + priv->power_data.system_power_setting = mode; + + ret = iwl_power_update_mode(priv, 0); + + return ret; +} +EXPORT_SYMBOL(iwl_power_set_system_mode); + +/* initilize to default */ +void iwl_power_initialize(struct iwl_priv *priv) +{ + + iwl_power_init_handle(priv); + priv->power_data.user_power_setting = IWL_POWER_AUTO; + priv->power_data.power_disabled = 0; + priv->power_data.system_power_setting = IWL_POWER_SYS_AUTO; + priv->power_data.is_battery_active = 0; + priv->power_data.power_disabled = 0; + priv->power_data.critical_power_setting = 0; +} +EXPORT_SYMBOL(iwl_power_initialize); + +/* set critical_power_setting according to temperature value */ +int iwl_power_temperature_change(struct iwl_priv *priv) +{ + int ret = 0; + u16 new_critical = priv->power_data.critical_power_setting; + s32 temperature = KELVIN_TO_CELSIUS(priv->last_temperature); + + if (temperature > IWL_CT_KILL_TEMPERATURE) + return 0; + else if (temperature > IWL_MIN_POWER_TEMPERATURE) + new_critical = IWL_POWER_INDEX_5; + else if (temperature > IWL_REDUCED_POWER_TEMPERATURE) + new_critical = IWL_POWER_INDEX_3; + else + new_critical = IWL_POWER_MODE_CAM; + + if (new_critical != priv->power_data.critical_power_setting) + priv->power_data.critical_power_setting = new_critical; + + if (priv->power_data.critical_power_setting > + priv->power_data.power_mode) + ret = iwl_power_update_mode(priv, 0); + + return ret; +} +EXPORT_SYMBOL(iwl_power_temperature_change); diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h new file mode 100644 index 0000000..abcbbf9 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-power.h @@ -0,0 +1,89 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ +#ifndef __iwl_power_setting_h__ +#define __iwl_power_setting_h__ + +#include <net/mac80211.h> +#include "iwl-commands.h" + +struct iwl_priv; + +enum { + IWL_POWER_MODE_CAM, /* Continuously Aware Mode, always on */ + IWL_POWER_INDEX_1, + IWL_POWER_INDEX_2, + IWL_POWER_INDEX_3, + IWL_POWER_INDEX_4, + IWL_POWER_INDEX_5, + IWL_POWER_AUTO, + IWL_POWER_MAX = IWL_POWER_AUTO, + IWL_POWER_AC, + IWL_POWER_BATTERY, +}; + +enum { + IWL_POWER_SYS_AUTO, + IWL_POWER_SYS_AC, + IWL_POWER_SYS_BATTERY, +}; + +#define IWL_POWER_LIMIT 0x08 +#define IWL_POWER_MASK 0x0F +#define IWL_POWER_ENABLED 0x10 + +/* Power management (not Tx power) structures */ + +struct iwl_power_vec_entry { + struct iwl_powertable_cmd cmd; + u8 no_dtim; +}; + +struct iwl_power_mgr { + spinlock_t lock; + struct iwl_power_vec_entry pwr_range_0[IWL_POWER_MAX]; + struct iwl_power_vec_entry pwr_range_1[IWL_POWER_MAX]; + struct iwl_power_vec_entry pwr_range_2[IWL_POWER_MAX]; + u32 dtim_period; + /* final power level that used to calculate final power command */ + u8 power_mode; + u8 user_power_setting; /* set by user through mac80211 or sysfs */ + u8 system_power_setting; /* set by kernel syatem tools */ + u8 critical_power_setting; /* set if driver over heated */ + u8 is_battery_active; /* DC/AC power */ + u8 power_disabled; /* flag to disable using power saving level */ +}; + +int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh); +int iwl_power_disable_management(struct iwl_priv *priv); +int iwl_power_enable_management(struct iwl_priv *priv); +int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode); +int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode); +void iwl_power_initialize(struct iwl_priv *priv); +int iwl_power_temperature_change(struct iwl_priv *priv); + +#endif /* __iwl_power_setting_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index c9cf8ee..ee5afd4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -84,14 +84,16 @@ #define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) #define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) -#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) -#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) +#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000) +#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) +#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */ +#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) -#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x01000000) +#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) /** * BSM (Bootstrap State Machine) @@ -239,40 +241,307 @@ #define ALM_SCD_SBYP_MODE_1_REG (ALM_SCD_BASE + 0x02C) #define ALM_SCD_SBYP_MODE_2_REG (ALM_SCD_BASE + 0x030) +/** + * Tx Scheduler + * + * The Tx Scheduler selects the next frame to be transmitted, chosing TFDs + * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in + * host DRAM. It steers each frame's Tx command (which contains the frame + * data) into one of up to 7 prioritized Tx DMA FIFO channels within the + * device. A queue maps to only one (selectable by driver) Tx DMA channel, + * but one DMA channel may take input from several queues. + * + * Tx DMA channels have dedicated purposes. For 4965, they are used as follows: + * + * 0 -- EDCA BK (background) frames, lowest priority + * 1 -- EDCA BE (best effort) frames, normal priority + * 2 -- EDCA VI (video) frames, higher priority + * 3 -- EDCA VO (voice) and management frames, highest priority + * 4 -- Commands (e.g. RXON, etc.) + * 5 -- HCCA short frames + * 6 -- HCCA long frames + * 7 -- not used by driver (device-internal only) + * + * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. + * In addition, driver can map queues 7-15 to Tx DMA/FIFO channels 0-3 to + * support 11n aggregation via EDCA DMA channels. + * + * The driver sets up each queue to work in one of two modes: + * + * 1) Scheduler-Ack, in which the scheduler automatically supports a + * block-ack (BA) window of up to 64 TFDs. In this mode, each queue + * contains TFDs for a unique combination of Recipient Address (RA) + * and Traffic Identifier (TID), that is, traffic of a given + * Quality-Of-Service (QOS) priority, destined for a single station. + * + * In scheduler-ack mode, the scheduler keeps track of the Tx status of + * each frame within the BA window, including whether it's been transmitted, + * and whether it's been acknowledged by the receiving station. The device + * automatically processes block-acks received from the receiving STA, + * and reschedules un-acked frames to be retransmitted (successful + * Tx completion may end up being out-of-order). + * + * The driver must maintain the queue's Byte Count table in host DRAM + * (struct iwl4965_sched_queue_byte_cnt_tbl) for this mode. + * This mode does not support fragmentation. + * + * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. + * The device may automatically retry Tx, but will retry only one frame + * at a time, until receiving ACK from receiving station, or reaching + * retry limit and giving up. + * + * The command queue (#4) must use this mode! + * This mode does not require use of the Byte Count table in host DRAM. + * + * Driver controls scheduler operation via 3 means: + * 1) Scheduler registers + * 2) Shared scheduler data base in internal 4956 SRAM + * 3) Shared data in host DRAM + * + * Initialization: + * + * When loading, driver should allocate memory for: + * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. + * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory + * (1024 bytes for each queue). + * + * After receiving "Alive" response from uCode, driver must initialize + * the scheduler (especially for queue #4, the command queue, otherwise + * the driver can't issue commands!): + */ + +/** + * Max Tx window size is the max number of contiguous TFDs that the scheduler + * can keep track of at one time when creating block-ack chains of frames. + * Note that "64" matches the number of ack bits in a block-ack packet. + * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize + * IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) values. + */ +#define SCD_WIN_SIZE 64 +#define SCD_FRAME_LIMIT 64 + +/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ +#define IWL49_SCD_START_OFFSET 0xa02c00 + +/* + * 4965 tells driver SRAM address for internal scheduler structs via this reg. + * Value is valid only after "Alive" response from uCode. + */ +#define IWL49_SCD_SRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x0) + +/* + * Driver may need to update queue-empty bits after changing queue's + * write and read pointers (indexes) during (re-)initialization (i.e. when + * scheduler is not tracking what's happening). + * Bit fields: + * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit + * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty + * NOTE: This register is not used by Linux driver. + */ +#define IWL49_SCD_EMPTY_BITS (IWL49_SCD_START_OFFSET + 0x4) + +/* + * Physical base address of array of byte count (BC) circular buffers (CBs). + * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode. + * This register points to BC CB for queue 0, must be on 1024-byte boundary. + * Others are spaced by 1024 bytes. + * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad. + * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff). + * Bit fields: + * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. + */ +#define IWL49_SCD_DRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x10) + +/* + * Enables any/all Tx DMA/FIFO channels. + * Scheduler generates requests for only the active channels. + * Set this to 0xff to enable all 8 channels (normal usage). + * Bit fields: + * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 + */ +#define IWL49_SCD_TXFACT (IWL49_SCD_START_OFFSET + 0x1c) +/* + * Queue (x) Write Pointers (indexes, really!), one for each Tx queue. + * Initialized and updated by driver as new TFDs are added to queue. + * NOTE: If using Block Ack, index must correspond to frame's + * Start Sequence Number; index = (SSN & 0xff) + * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? + */ +#define IWL49_SCD_QUEUE_WRPTR(x) (IWL49_SCD_START_OFFSET + 0x24 + (x) * 4) + +/* + * Queue (x) Read Pointers (indexes, really!), one for each Tx queue. + * For FIFO mode, index indicates next frame to transmit. + * For Scheduler-ACK mode, index indicates first frame in Tx window. + * Initialized by driver, updated by scheduler. + */ +#define IWL49_SCD_QUEUE_RDPTR(x) (IWL49_SCD_START_OFFSET + 0x64 + (x) * 4) + +/* + * Select which queues work in chain mode (1) vs. not (0). + * Use chain mode to build chains of aggregated frames. + * Bit fields: + * 31-16: Reserved + * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time + * NOTE: If driver sets up queue for chain mode, it should be also set up + * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). + */ +#define IWL49_SCD_QUEUECHAIN_SEL (IWL49_SCD_START_OFFSET + 0xd0) + +/* + * Select which queues interrupt driver when scheduler increments + * a queue's read pointer (index). + * Bit fields: + * 31-16: Reserved + * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled + * NOTE: This functionality is apparently a no-op; driver relies on interrupts + * from Rx queue to read Tx command responses and update Tx queues. + */ +#define IWL49_SCD_INTERRUPT_MASK (IWL49_SCD_START_OFFSET + 0xe4) + +/* + * Queue search status registers. One for each queue. + * Sets up queue mode and assigns queue to Tx DMA channel. + * Bit fields: + * 19-10: Write mask/enable bits for bits 0-9 + * 9: Driver should init to "0" + * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0). + * Driver should init to "1" for aggregation mode, or "0" otherwise. + * 7-6: Driver should init to "0" + * 5: Window Size Left; indicates whether scheduler can request + * another TFD, based on window size, etc. Driver should init + * this bit to "1" for aggregation mode, or "0" for non-agg. + * 4-1: Tx FIFO to use (range 0-7). + * 0: Queue is active (1), not active (0). + * Other bits should be written as "0" + * + * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled + * via SCD_QUEUECHAIN_SEL. + */ +#define IWL49_SCD_QUEUE_STATUS_BITS(x)\ + (IWL49_SCD_START_OFFSET + 0x104 + (x) * 4) + +/* Bit field positions */ +#define IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE (0) +#define IWL49_SCD_QUEUE_STTS_REG_POS_TXF (1) +#define IWL49_SCD_QUEUE_STTS_REG_POS_WSL (5) +#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) + +/* Write masks */ +#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) +#define IWL49_SCD_QUEUE_STTS_REG_MSK (0x0007FC00) + +/** + * 4965 internal SRAM structures for scheduler, shared with driver ... + * + * Driver should clear and initialize the following areas after receiving + * "Alive" response from 4965 uCode, i.e. after initial + * uCode load, or after a uCode load done for error recovery: + * + * SCD_CONTEXT_DATA_OFFSET (size 128 bytes) + * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes) + * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes) + * + * Driver accesses SRAM via HBUS_TARG_MEM_* registers. + * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR. + * All OFFSET values must be added to this base address. + */ + +/* + * Queue context. One 8-byte entry for each of 16 queues. + * + * Driver should clear this entire area (size 0x80) to 0 after receiving + * "Alive" notification from uCode. Additionally, driver should init + * each queue's entry as follows: + * + * LS Dword bit fields: + * 0-06: Max Tx window size for Scheduler-ACK. Driver should init to 64. + * + * MS Dword bit fields: + * 16-22: Frame limit. Driver should init to 10 (0xa). + * + * Driver should init all other bits to 0. + * + * Init must be done after driver receives "Alive" response from 4965 uCode, + * and when setting up queue for aggregation. + */ +#define IWL49_SCD_CONTEXT_DATA_OFFSET 0x380 +#define IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) \ + (IWL49_SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) + +#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) +#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) +#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) +#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) + +/* + * Tx Status Bitmap + * + * Driver should clear this entire area (size 0x100) to 0 after receiving + * "Alive" notification from uCode. Area is used only by device itself; + * no other support (besides clearing) is required from driver. + */ +#define IWL49_SCD_TX_STTS_BITMAP_OFFSET 0x400 + /* - * 4965 Tx Scheduler registers. - * Details are documented in iwl-4965-hw.h + * RAxTID to queue translation mapping. + * + * When queue is in Scheduler-ACK mode, frames placed in a that queue must be + * for only one combination of receiver address (RA) and traffic ID (TID), i.e. + * one QOS priority level destined for one station (for this wireless link, + * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit + * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK + * mode, the device ignores the mapping value. + * + * Bit fields, for each 16-bit map: + * 15-9: Reserved, set to 0 + * 8-4: Index into device's station table for recipient station + * 3-0: Traffic ID (tid), range 0-15 + * + * Driver should clear this entire area (size 32 bytes) to 0 after receiving + * "Alive" notification from uCode. To update a 16-bit map value, driver + * must read a dword-aligned value from device SRAM, replace the 16-bit map + * value of interest, and write the dword value back into device SRAM. */ -#define IWL49_SCD_BASE (PRPH_BASE + 0xa02c00) - -#define IWL49_SCD_SRAM_BASE_ADDR (IWL49_SCD_BASE + 0x0) -#define IWL49_SCD_EMPTY_BITS (IWL49_SCD_BASE + 0x4) -#define IWL49_SCD_DRAM_BASE_ADDR (IWL49_SCD_BASE + 0x10) -#define IWL49_SCD_AIT (IWL49_SCD_BASE + 0x18) -#define IWL49_SCD_TXFACT (IWL49_SCD_BASE + 0x1c) -#define IWL49_SCD_QUEUE_WRPTR(x) (IWL49_SCD_BASE + 0x24 + (x) * 4) -#define IWL49_SCD_QUEUE_RDPTR(x) (IWL49_SCD_BASE + 0x64 + (x) * 4) -#define IWL49_SCD_SETQUEUENUM (IWL49_SCD_BASE + 0xa4) -#define IWL49_SCD_SET_TXSTAT_TXED (IWL49_SCD_BASE + 0xa8) -#define IWL49_SCD_SET_TXSTAT_DONE (IWL49_SCD_BASE + 0xac) -#define IWL49_SCD_SET_TXSTAT_NOT_SCHD (IWL49_SCD_BASE + 0xb0) -#define IWL49_SCD_DECREASE_CREDIT (IWL49_SCD_BASE + 0xb4) -#define IWL49_SCD_DECREASE_SCREDIT (IWL49_SCD_BASE + 0xb8) -#define IWL49_SCD_LOAD_CREDIT (IWL49_SCD_BASE + 0xbc) -#define IWL49_SCD_LOAD_SCREDIT (IWL49_SCD_BASE + 0xc0) -#define IWL49_SCD_BAR (IWL49_SCD_BASE + 0xc4) -#define IWL49_SCD_BAR_DW0 (IWL49_SCD_BASE + 0xc8) -#define IWL49_SCD_BAR_DW1 (IWL49_SCD_BASE + 0xcc) -#define IWL49_SCD_QUEUECHAIN_SEL (IWL49_SCD_BASE + 0xd0) -#define IWL49_SCD_QUERY_REQ (IWL49_SCD_BASE + 0xd8) -#define IWL49_SCD_QUERY_RES (IWL49_SCD_BASE + 0xdc) -#define IWL49_SCD_PENDING_FRAMES (IWL49_SCD_BASE + 0xe0) -#define IWL49_SCD_INTERRUPT_MASK (IWL49_SCD_BASE + 0xe4) -#define IWL49_SCD_INTERRUPT_THRESHOLD (IWL49_SCD_BASE + 0xe8) -#define IWL49_SCD_QUERY_MIN_FRAME_SIZE (IWL49_SCD_BASE + 0x100) -#define IWL49_SCD_QUEUE_STATUS_BITS(x) (IWL49_SCD_BASE + 0x104 + (x) * 4) - -/* SP SCD */ +#define IWL49_SCD_TRANSLATE_TBL_OFFSET 0x500 + +/* Find translation table dword to read/write for given queue */ +#define IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ + ((IWL49_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) + +#define IWL_SCD_TXFIFO_POS_TID (0) +#define IWL_SCD_TXFIFO_POS_RA (4) +#define IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) + +/* 5000 SCD */ +#define IWL50_SCD_QUEUE_STTS_REG_POS_TXF (0) +#define IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE (3) +#define IWL50_SCD_QUEUE_STTS_REG_POS_WSL (4) +#define IWL50_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19) +#define IWL50_SCD_QUEUE_STTS_REG_MSK (0x00FF0000) + +#define IWL50_SCD_QUEUE_CTX_REG1_CREDIT_POS (8) +#define IWL50_SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00) +#define IWL50_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24) +#define IWL50_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000) +#define IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0) +#define IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F) +#define IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) +#define IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) + +#define IWL50_SCD_CONTEXT_DATA_OFFSET (0x600) +#define IWL50_SCD_TX_STTS_BITMAP_OFFSET (0x7B1) +#define IWL50_SCD_TRANSLATE_TBL_OFFSET (0x7E0) + +#define IWL50_SCD_CONTEXT_QUEUE_OFFSET(x)\ + (IWL50_SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) + +#define IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ + ((IWL50_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffc) + +#define IWL50_SCD_QUEUECHAIN_SEL_ALL(x) (((1<<(x)) - 1) &\ + (~(1<<IWL_CMD_QUEUE_NUM))) + #define IWL50_SCD_BASE (PRPH_BASE + 0xa02c00) #define IWL50_SCD_SRAM_BASE_ADDR (IWL50_SCD_BASE + 0x0) @@ -287,4 +556,6 @@ #define IWL50_SCD_INTERRUPT_MASK (IWL50_SCD_BASE + 0x108) #define IWL50_SCD_QUEUE_STATUS_BITS(x) (IWL50_SCD_BASE + 0x10c + (x) * 4) +/*********************** END TX SCHEDULER *************************************/ + #endif /* __iwl_prph_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c index 5980a56..e5e5846 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c +++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c @@ -33,7 +33,7 @@ #include <net/mac80211.h> #include "iwl-eeprom.h" -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-helpers.h" @@ -44,28 +44,31 @@ static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state) struct iwl_priv *priv = data; int err = 0; - if (!priv->rfkill_mngr.rfkill) + if (!priv->rfkill) return 0; if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return 0; - IWL_DEBUG_RF_KILL("we recieved soft RFKILL set to state %d\n", state); + IWL_DEBUG_RF_KILL("we received soft RFKILL set to state %d\n", state); mutex_lock(&priv->mutex); switch (state) { - case RFKILL_STATE_ON: - priv->cfg->ops->lib->radio_kill_sw(priv, 0); - /* if HW rf-kill is set dont allow ON state */ - if (iwl_is_rfkill(priv)) + case RFKILL_STATE_UNBLOCKED: + if (iwl_is_rfkill_hw(priv)) { err = -EBUSY; + goto out_unlock; + } + iwl_radio_kill_sw_enable_radio(priv); break; - case RFKILL_STATE_OFF: - priv->cfg->ops->lib->radio_kill_sw(priv, 1); - if (!iwl_is_rfkill(priv)) - err = -EBUSY; + case RFKILL_STATE_SOFT_BLOCKED: + iwl_radio_kill_sw_disable_radio(priv); + break; + default: + IWL_WARNING("we recieved unexpected RFKILL state %d\n", state); break; } +out_unlock: mutex_unlock(&priv->mutex); return err; @@ -79,64 +82,35 @@ int iwl_rfkill_init(struct iwl_priv *priv) BUG_ON(device == NULL); IWL_DEBUG_RF_KILL("Initializing RFKILL.\n"); - priv->rfkill_mngr.rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN); - if (!priv->rfkill_mngr.rfkill) { + priv->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN); + if (!priv->rfkill) { IWL_ERROR("Unable to allocate rfkill device.\n"); ret = -ENOMEM; goto error; } - priv->rfkill_mngr.rfkill->name = priv->cfg->name; - priv->rfkill_mngr.rfkill->data = priv; - priv->rfkill_mngr.rfkill->state = RFKILL_STATE_ON; - priv->rfkill_mngr.rfkill->toggle_radio = iwl_rfkill_soft_rf_kill; - priv->rfkill_mngr.rfkill->user_claim_unsupported = 1; + priv->rfkill->name = priv->cfg->name; + priv->rfkill->data = priv; + priv->rfkill->state = RFKILL_STATE_UNBLOCKED; + priv->rfkill->toggle_radio = iwl_rfkill_soft_rf_kill; + priv->rfkill->user_claim_unsupported = 1; - priv->rfkill_mngr.rfkill->dev.class->suspend = NULL; - priv->rfkill_mngr.rfkill->dev.class->resume = NULL; + priv->rfkill->dev.class->suspend = NULL; + priv->rfkill->dev.class->resume = NULL; - priv->rfkill_mngr.input_dev = input_allocate_device(); - if (!priv->rfkill_mngr.input_dev) { - IWL_ERROR("Unable to allocate rfkill input device.\n"); - ret = -ENOMEM; - goto freed_rfkill; - } - - priv->rfkill_mngr.input_dev->name = priv->cfg->name; - priv->rfkill_mngr.input_dev->phys = wiphy_name(priv->hw->wiphy); - priv->rfkill_mngr.input_dev->id.bustype = BUS_HOST; - priv->rfkill_mngr.input_dev->id.vendor = priv->pci_dev->vendor; - priv->rfkill_mngr.input_dev->dev.parent = device; - priv->rfkill_mngr.input_dev->evbit[0] = BIT(EV_KEY); - set_bit(KEY_WLAN, priv->rfkill_mngr.input_dev->keybit); - - ret = rfkill_register(priv->rfkill_mngr.rfkill); + ret = rfkill_register(priv->rfkill); if (ret) { IWL_ERROR("Unable to register rfkill: %d\n", ret); - goto free_input_dev; - } - - ret = input_register_device(priv->rfkill_mngr.input_dev); - if (ret) { - IWL_ERROR("Unable to register rfkill input device: %d\n", ret); - goto unregister_rfkill; + goto free_rfkill; } IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n"); return ret; -unregister_rfkill: - rfkill_unregister(priv->rfkill_mngr.rfkill); - priv->rfkill_mngr.rfkill = NULL; - -free_input_dev: - input_free_device(priv->rfkill_mngr.input_dev); - priv->rfkill_mngr.input_dev = NULL; - -freed_rfkill: - if (priv->rfkill_mngr.rfkill != NULL) - rfkill_free(priv->rfkill_mngr.rfkill); - priv->rfkill_mngr.rfkill = NULL; +free_rfkill: + if (priv->rfkill != NULL) + rfkill_free(priv->rfkill); + priv->rfkill = NULL; error: IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n"); @@ -147,27 +121,27 @@ EXPORT_SYMBOL(iwl_rfkill_init); void iwl_rfkill_unregister(struct iwl_priv *priv) { - if (priv->rfkill_mngr.input_dev) - input_unregister_device(priv->rfkill_mngr.input_dev); + if (priv->rfkill) + rfkill_unregister(priv->rfkill); - if (priv->rfkill_mngr.rfkill) - rfkill_unregister(priv->rfkill_mngr.rfkill); - - priv->rfkill_mngr.input_dev = NULL; - priv->rfkill_mngr.rfkill = NULL; + priv->rfkill = NULL; } EXPORT_SYMBOL(iwl_rfkill_unregister); /* set rf-kill to the right state. */ void iwl_rfkill_set_hw_state(struct iwl_priv *priv) { + if (!priv->rfkill) + return; - if (!priv->rfkill_mngr.rfkill) + if (iwl_is_rfkill_hw(priv)) { + rfkill_force_state(priv->rfkill, RFKILL_STATE_HARD_BLOCKED); return; + } - if (!iwl_is_rfkill(priv)) - priv->rfkill_mngr.rfkill->state = RFKILL_STATE_ON; + if (!iwl_is_rfkill_sw(priv)) + rfkill_force_state(priv->rfkill, RFKILL_STATE_UNBLOCKED); else - priv->rfkill_mngr.rfkill->state = RFKILL_STATE_OFF; + rfkill_force_state(priv->rfkill, RFKILL_STATE_SOFT_BLOCKED); } EXPORT_SYMBOL(iwl_rfkill_set_hw_state); diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.h b/drivers/net/wireless/iwlwifi/iwl-rfkill.h index 486a207..2854276 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rfkill.h +++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.h @@ -32,14 +32,9 @@ struct iwl_priv; #if 0 /* Not in RHEL5 */ #include <linux/rfkill.h> -#include <linux/input.h> #endif #ifdef CONFIG_IWLWIFI_RFKILL -struct iwl_rfkill_mngr { - struct rfkill *rfkill; - struct input_dev *input_dev; -}; void iwl_rfkill_set_hw_state(struct iwl_priv *priv); void iwl_rfkill_unregister(struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c new file mode 100644 index 0000000..02fbd79 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -0,0 +1,1297 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/etherdevice.h> +#include <net/mac80211.h> +#include <asm/unaligned.h> +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-sta.h" +#include "iwl-io.h" +#include "iwl-calib.h" +#include "iwl-helpers.h" +/************************** RX-FUNCTIONS ****************************/ +/* + * Rx theory of operation + * + * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), + * each of which point to Receive Buffers to be filled by the NIC. These get + * used not only for Rx frames, but for any command response or notification + * from the NIC. The driver and NIC manage the Rx buffers by means + * of indexes into the circular buffer. + * + * Rx Queue Indexes + * The host/firmware share two index registers for managing the Rx buffers. + * + * The READ index maps to the first position that the firmware may be writing + * to -- the driver can read up to (but not including) this position and get + * good data. + * The READ index is managed by the firmware once the card is enabled. + * + * The WRITE index maps to the last position the driver has read from -- the + * position preceding WRITE is the last slot the firmware can place a packet. + * + * The queue is empty (no good data) if WRITE = READ - 1, and is full if + * WRITE = READ. + * + * During initialization, the host sets up the READ queue position to the first + * INDEX position, and WRITE to the last (READ - 1 wrapped) + * + * When the firmware places a packet in a buffer, it will advance the READ index + * and fire the RX interrupt. The driver can then query the READ index and + * process as many packets as possible, moving the WRITE index forward as it + * resets the Rx queue buffers with new memory. + * + * The management in the driver is as follows: + * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When + * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled + * to replenish the iwl->rxq->rx_free. + * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the + * iwl->rxq is replenished and the READ INDEX is updated (updating the + * 'processed' and 'read' driver indexes as well) + * + A received packet is processed and handed to the kernel network stack, + * detached from the iwl->rxq. The driver 'processed' index is updated. + * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free + * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ + * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there + * were enough free buffers and RX_STALLED is set it is cleared. + * + * + * Driver sequence: + * + * iwl_rx_queue_alloc() Allocates rx_free + * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls + * iwl_rx_queue_restock + * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx + * queue, updates firmware pointers, and updates + * the WRITE index. If insufficient rx_free buffers + * are available, schedules iwl_rx_replenish + * + * -- enable interrupts -- + * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the + * READ INDEX, detaching the SKB from the pool. + * Moves the packet buffer from queue to rx_used. + * Calls iwl_rx_queue_restock to refill any empty + * slots. + * ... + * + */ + +/** + * iwl_rx_queue_space - Return number of free slots available in queue. + */ +int iwl_rx_queue_space(const struct iwl_rx_queue *q) +{ + int s = q->read - q->write; + if (s <= 0) + s += RX_QUEUE_SIZE; + /* keep some buffer to not confuse full and empty queue */ + s -= 2; + if (s < 0) + s = 0; + return s; +} +EXPORT_SYMBOL(iwl_rx_queue_space); + +/** + * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue + */ +int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q) +{ + u32 reg = 0; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&q->lock, flags); + + if (q->need_update == 0) + goto exit_unlock; + + /* If power-saving is in use, make sure device is awake */ + if (test_bit(STATUS_POWER_PMI, &priv->status)) { + reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); + + if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { + iwl_set_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + goto exit_unlock; + } + + ret = iwl_grab_nic_access(priv); + if (ret) + goto exit_unlock; + + /* Device expects a multiple of 8 */ + iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR, + q->write & ~0x7); + iwl_release_nic_access(priv); + + /* Else device is assumed to be awake */ + } else + /* Device expects a multiple of 8 */ + iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7); + + + q->need_update = 0; + + exit_unlock: + spin_unlock_irqrestore(&q->lock, flags); + return ret; +} +EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr); +/** + * iwl_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr + */ +static inline __le32 iwl_dma_addr2rbd_ptr(struct iwl_priv *priv, + dma_addr_t dma_addr) +{ + return cpu_to_le32((u32)(dma_addr >> 8)); +} + +/** + * iwl_rx_queue_restock - refill RX queue from pre-allocated pool + * + * If there are slots in the RX queue that need to be restocked, + * and we have free pre-allocated buffers, fill the ranks as much + * as we can, pulling from rx_free. + * + * This moves the 'write' index forward to catch up with 'processed', and + * also updates the memory address in the firmware to reference the new + * target buffer. + */ +int iwl_rx_queue_restock(struct iwl_priv *priv) +{ + struct iwl_rx_queue *rxq = &priv->rxq; + struct list_head *element; + struct iwl_rx_mem_buffer *rxb; + unsigned long flags; + int write; + int ret = 0; + + spin_lock_irqsave(&rxq->lock, flags); + write = rxq->write & ~0x7; + while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { + /* Get next free Rx buffer, remove from free list */ + element = rxq->rx_free.next; + rxb = list_entry(element, struct iwl_rx_mem_buffer, list); + list_del(element); + + /* Point to Rx buffer via next RBD in circular buffer */ + rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr); + rxq->queue[rxq->write] = rxb; + rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; + rxq->free_count--; + } + spin_unlock_irqrestore(&rxq->lock, flags); + /* If the pre-allocated buffer pool is dropping low, schedule to + * refill it */ + if (rxq->free_count <= RX_LOW_WATERMARK) + queue_work(priv->workqueue, &priv->rx_replenish); + + + /* If we've added more space for the firmware to place data, tell it. + * Increment device's write pointer in multiples of 8. */ + if ((write != (rxq->write & ~0x7)) + || (abs(rxq->write - rxq->read) > 7)) { + spin_lock_irqsave(&rxq->lock, flags); + rxq->need_update = 1; + spin_unlock_irqrestore(&rxq->lock, flags); + ret = iwl_rx_queue_update_write_ptr(priv, rxq); + } + + return ret; +} +EXPORT_SYMBOL(iwl_rx_queue_restock); + + +/** + * iwl_rx_replenish - Move all used packet from rx_used to rx_free + * + * When moving to rx_free an SKB is allocated for the slot. + * + * Also restock the Rx queue via iwl_rx_queue_restock. + * This is called as a scheduled work item (except for during initialization) + */ +void iwl_rx_allocate(struct iwl_priv *priv) +{ + struct iwl_rx_queue *rxq = &priv->rxq; + struct list_head *element; + struct iwl_rx_mem_buffer *rxb; + unsigned long flags; + spin_lock_irqsave(&rxq->lock, flags); + while (!list_empty(&rxq->rx_used)) { + element = rxq->rx_used.next; + rxb = list_entry(element, struct iwl_rx_mem_buffer, list); + + /* Alloc a new receive buffer */ + rxb->skb = alloc_skb(priv->hw_params.rx_buf_size, + __GFP_NOWARN | GFP_ATOMIC); + if (!rxb->skb) { + if (net_ratelimit()) + printk(KERN_CRIT DRV_NAME + ": Can not allocate SKB buffers\n"); + /* We don't reschedule replenish work here -- we will + * call the restock method and if it still needs + * more buffers it will schedule replenish */ + break; + } + priv->alloc_rxb_skb++; + list_del(element); + + /* Get physical address of RB/SKB */ + rxb->dma_addr = + pci_map_single(priv->pci_dev, rxb->skb->data, + priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE); + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } + spin_unlock_irqrestore(&rxq->lock, flags); +} +EXPORT_SYMBOL(iwl_rx_allocate); + +void iwl_rx_replenish(struct iwl_priv *priv) +{ + unsigned long flags; + + iwl_rx_allocate(priv); + + spin_lock_irqsave(&priv->lock, flags); + iwl_rx_queue_restock(priv); + spin_unlock_irqrestore(&priv->lock, flags); +} +EXPORT_SYMBOL(iwl_rx_replenish); + + +/* Assumes that the skb field of the buffers in 'pool' is kept accurate. + * If an SKB has been detached, the POOL needs to have its SKB set to NULL + * This free routine walks the list of POOL entries and if SKB is set to + * non NULL it is unmapped and freed + */ +void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + int i; + for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, + rxq->pool[i].dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(rxq->pool[i].skb); + } + } + + pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd, + rxq->dma_addr); + rxq->bd = NULL; +} +EXPORT_SYMBOL(iwl_rx_queue_free); + +int iwl_rx_queue_alloc(struct iwl_priv *priv) +{ + struct iwl_rx_queue *rxq = &priv->rxq; + struct pci_dev *dev = priv->pci_dev; + int i; + + spin_lock_init(&rxq->lock); + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + + /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */ + rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr); + if (!rxq->bd) + return -ENOMEM; + + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->free_count = 0; + rxq->need_update = 0; + return 0; +} +EXPORT_SYMBOL(iwl_rx_queue_alloc); + +void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + unsigned long flags; + int i; + spin_lock_irqsave(&rxq->lock, flags); + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { + /* In the reset function, these buffers may have been allocated + * to an SKB, so we need to unmap and free potential storage */ + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, + rxq->pool[i].dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + priv->alloc_rxb_skb--; + dev_kfree_skb(rxq->pool[i].skb); + rxq->pool[i].skb = NULL; + } + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + } + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->free_count = 0; + spin_unlock_irqrestore(&rxq->lock, flags); +} +EXPORT_SYMBOL(iwl_rx_queue_reset); + +int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + int ret; + unsigned long flags; + unsigned int rb_size; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) { + spin_unlock_irqrestore(&priv->lock, flags); + return ret; + } + + if (priv->cfg->mod_params->amsdu_size_8K) + rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; + else + rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; + + /* Stop Rx DMA */ + iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); + + /* Reset driver's Rx queue write index */ + iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); + + /* Tell device where to find RBD circular buffer in DRAM */ + iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, + rxq->dma_addr >> 8); + + /* Tell device where in DRAM to update its Rx status */ + iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, + (priv->shared_phys + priv->rb_closed_offset) >> 4); + + /* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */ + iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, + FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | + FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | + rb_size | + /* 0x10 << 4 | */ + (RX_QUEUE_SIZE_LOG << + FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT)); + + /* + * iwl_write32(priv,CSR_INT_COAL_REG,0); + */ + + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +int iwl_rxq_stop(struct iwl_priv *priv) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (unlikely(ret)) { + spin_unlock_irqrestore(&priv->lock, flags); + return ret; + } + + /* stop Rx DMA */ + iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); + ret = iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG, + (1 << 24), 1000); + if (ret < 0) + IWL_ERROR("Can't stop Rx DMA.\n"); + + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} +EXPORT_SYMBOL(iwl_rxq_stop); + +void iwl_rx_missed_beacon_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) + +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl4965_missed_beacon_notif *missed_beacon; + + missed_beacon = &pkt->u.missed_beacon; + if (le32_to_cpu(missed_beacon->consequtive_missed_beacons) > 5) { + IWL_DEBUG_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n", + le32_to_cpu(missed_beacon->consequtive_missed_beacons), + le32_to_cpu(missed_beacon->total_missed_becons), + le32_to_cpu(missed_beacon->num_recvd_beacons), + le32_to_cpu(missed_beacon->num_expected_beacons)); + if (!test_bit(STATUS_SCANNING, &priv->status)) + iwl_init_sensitivity(priv); + } +} +EXPORT_SYMBOL(iwl_rx_missed_beacon_notif); + +int iwl_rx_agg_start(struct iwl_priv *priv, const u8 *addr, int tid, u16 ssn) +{ + unsigned long flags; + int sta_id; + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) + return -ENXIO; + + spin_lock_irqsave(&priv->sta_lock, flags); + priv->stations[sta_id].sta.station_flags_msk = 0; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; + priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid; + priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, + CMD_ASYNC); +} +EXPORT_SYMBOL(iwl_rx_agg_start); + +int iwl_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid) +{ + unsigned long flags; + int sta_id; + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) + return -ENXIO; + + spin_lock_irqsave(&priv->sta_lock, flags); + priv->stations[sta_id].sta.station_flags_msk = 0; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; + priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, + CMD_ASYNC); +} +EXPORT_SYMBOL(iwl_rx_agg_stop); + + +/* Calculate noise level, based on measurements during network silence just + * before arriving beacon. This measurement can be done only if we know + * exactly when to expect beacons, therefore only when we're associated. */ +static void iwl_rx_calc_noise(struct iwl_priv *priv) +{ + struct statistics_rx_non_phy *rx_info + = &(priv->statistics.rx.general); + int num_active_rx = 0; + int total_silence = 0; + int bcn_silence_a = + le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; + int bcn_silence_b = + le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; + int bcn_silence_c = + le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; + + if (bcn_silence_a) { + total_silence += bcn_silence_a; + num_active_rx++; + } + if (bcn_silence_b) { + total_silence += bcn_silence_b; + num_active_rx++; + } + if (bcn_silence_c) { + total_silence += bcn_silence_c; + num_active_rx++; + } + + /* Average among active antennas */ + if (num_active_rx) + priv->last_rx_noise = (total_silence / num_active_rx) - 107; + else + priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; + + IWL_DEBUG_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", + bcn_silence_a, bcn_silence_b, bcn_silence_c, + priv->last_rx_noise); +} + +#define REG_RECALIB_PERIOD (60) + +void iwl_rx_statistics(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + int change; + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + + IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n", + (int)sizeof(priv->statistics), pkt->len); + + change = ((priv->statistics.general.temperature != + pkt->u.stats.general.temperature) || + ((priv->statistics.flag & + STATISTICS_REPLY_FLG_FAT_MODE_MSK) != + (pkt->u.stats.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK))); + + memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics)); + + set_bit(STATUS_STATISTICS, &priv->status); + + /* Reschedule the statistics timer to occur in + * REG_RECALIB_PERIOD seconds to ensure we get a + * thermal update even if the uCode doesn't give + * us one */ + mod_timer(&priv->statistics_periodic, jiffies + + msecs_to_jiffies(REG_RECALIB_PERIOD * 1000)); + + if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && + (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) { + iwl_rx_calc_noise(priv); + queue_work(priv->workqueue, &priv->run_time_calib_work); + } + + iwl_leds_background(priv); + + if (priv->cfg->ops->lib->temperature && change) + priv->cfg->ops->lib->temperature(priv); +} +EXPORT_SYMBOL(iwl_rx_statistics); + +#define PERFECT_RSSI (-20) /* dBm */ +#define WORST_RSSI (-95) /* dBm */ +#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) + +/* Calculate an indication of rx signal quality (a percentage, not dBm!). + * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info + * about formulas used below. */ +static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm) +{ + int sig_qual; + int degradation = PERFECT_RSSI - rssi_dbm; + + /* If we get a noise measurement, use signal-to-noise ratio (SNR) + * as indicator; formula is (signal dbm - noise dbm). + * SNR at or above 40 is a great signal (100%). + * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. + * Weakest usable signal is usually 10 - 15 dB SNR. */ + if (noise_dbm) { + if (rssi_dbm - noise_dbm >= 40) + return 100; + else if (rssi_dbm < noise_dbm) + return 0; + sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; + + /* Else use just the signal level. + * This formula is a least squares fit of data points collected and + * compared with a reference system that had a percentage (%) display + * for signal quality. */ + } else + sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * + (15 * RSSI_RANGE + 62 * degradation)) / + (RSSI_RANGE * RSSI_RANGE); + + if (sig_qual > 100) + sig_qual = 100; + else if (sig_qual < 1) + sig_qual = 0; + + return sig_qual; +} + +#ifdef CONFIG_IWLWIFI_DEBUG + +/** + * iwl_dbg_report_frame - dump frame to syslog during debug sessions + * + * You may hack this function to show different aspects of received frames, + * including selective frame dumps. + * group100 parameter selects whether to show 1 out of 100 good frames. + * + * TODO: This was originally written for 3945, need to audit for + * proper operation with 4965. + */ +static void iwl_dbg_report_frame(struct iwl_priv *priv, + struct iwl_rx_packet *pkt, + struct ieee80211_hdr *header, int group100) +{ + u32 to_us; + u32 print_summary = 0; + u32 print_dump = 0; /* set to 1 to dump all frames' contents */ + u32 hundred = 0; + u32 dataframe = 0; + __le16 fc; + u16 seq_ctl; + u16 channel; + u16 phy_flags; + int rate_sym; + u16 length; + u16 status; + u16 bcn_tmr; + u32 tsf_low; + u64 tsf; + u8 rssi; + u8 agc; + u16 sig_avg; + u16 noise_diff; + struct iwl4965_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); + struct iwl4965_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); + struct iwl4965_rx_frame_end *rx_end = IWL_RX_END(pkt); + u8 *data = IWL_RX_DATA(pkt); + + if (likely(!(priv->debug_level & IWL_DL_RX))) + return; + + /* MAC header */ + fc = header->frame_control; + seq_ctl = le16_to_cpu(header->seq_ctrl); + + /* metadata */ + channel = le16_to_cpu(rx_hdr->channel); + phy_flags = le16_to_cpu(rx_hdr->phy_flags); + rate_sym = rx_hdr->rate; + length = le16_to_cpu(rx_hdr->len); + + /* end-of-frame status and timestamp */ + status = le32_to_cpu(rx_end->status); + bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp); + tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff; + tsf = le64_to_cpu(rx_end->timestamp); + + /* signal statistics */ + rssi = rx_stats->rssi; + agc = rx_stats->agc; + sig_avg = le16_to_cpu(rx_stats->sig_avg); + noise_diff = le16_to_cpu(rx_stats->noise_diff); + + to_us = !compare_ether_addr(header->addr1, priv->mac_addr); + + /* if data frame is to us and all is good, + * (optionally) print summary for only 1 out of every 100 */ + if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) == + cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) { + dataframe = 1; + if (!group100) + print_summary = 1; /* print each frame */ + else if (priv->framecnt_to_us < 100) { + priv->framecnt_to_us++; + print_summary = 0; + } else { + priv->framecnt_to_us = 0; + print_summary = 1; + hundred = 1; + } + } else { + /* print summary for all other frames */ + print_summary = 1; + } + + if (print_summary) { + char *title; + int rate_idx; + u32 bitrate; + + if (hundred) + title = "100Frames"; + else if (ieee80211_has_retry(fc)) + title = "Retry"; + else if (ieee80211_is_assoc_resp(fc)) + title = "AscRsp"; + else if (ieee80211_is_reassoc_resp(fc)) + title = "RasRsp"; + else if (ieee80211_is_probe_resp(fc)) { + title = "PrbRsp"; + print_dump = 1; /* dump frame contents */ + } else if (ieee80211_is_beacon(fc)) { + title = "Beacon"; + print_dump = 1; /* dump frame contents */ + } else if (ieee80211_is_atim(fc)) + title = "ATIM"; + else if (ieee80211_is_auth(fc)) + title = "Auth"; + else if (ieee80211_is_deauth(fc)) + title = "DeAuth"; + else if (ieee80211_is_disassoc(fc)) + title = "DisAssoc"; + else + title = "Frame"; + + rate_idx = iwl_hwrate_to_plcp_idx(rate_sym); + if (unlikely(rate_idx == -1)) + bitrate = 0; + else + bitrate = iwl_rates[rate_idx].ieee / 2; + + /* print frame summary. + * MAC addresses show just the last byte (for brevity), + * but you can hack it to show more, if you'd like to. */ + if (dataframe) + IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, " + "len=%u, rssi=%d, chnl=%d, rate=%u, \n", + title, le16_to_cpu(fc), header->addr1[5], + length, rssi, channel, bitrate); + else { + /* src/dst addresses assume managed mode */ + IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, " + "src=0x%02x, rssi=%u, tim=%lu usec, " + "phy=0x%02x, chnl=%d\n", + title, le16_to_cpu(fc), header->addr1[5], + header->addr3[5], rssi, + tsf_low - priv->scan_start_tsf, + phy_flags, channel); + } + } + if (print_dump) + iwl_print_hex_dump(priv, IWL_DL_RX, data, length); +} +#else +static inline void iwl_dbg_report_frame(struct iwl_priv *priv, + struct iwl_rx_packet *pkt, + struct ieee80211_hdr *header, + int group100) +{ +} +#endif + +static void iwl_add_radiotap(struct iwl_priv *priv, + struct sk_buff *skb, + struct iwl_rx_phy_res *rx_start, + struct ieee80211_rx_status *stats, + u32 ampdu_status) +{ + s8 signal = stats->ssi; + s8 noise = 0; + int rate = stats->rate_idx; + u64 tsf = stats->mactime; + __le16 antenna; + __le16 phy_flags_hw = rx_start->phy_flags; + struct iwl4965_rt_rx_hdr { + struct ieee80211_radiotap_header rt_hdr; + __le64 rt_tsf; /* TSF */ + u8 rt_flags; /* radiotap packet flags */ + u8 rt_rate; /* rate in 500kb/s */ + __le16 rt_channelMHz; /* channel in MHz */ + __le16 rt_chbitmask; /* channel bitfield */ + s8 rt_dbmsignal; /* signal in dBm, kluged to signed */ + s8 rt_dbmnoise; + u8 rt_antenna; /* antenna number */ + } __attribute__ ((packed)) *iwl4965_rt; + + /* TODO: We won't have enough headroom for HT frames. Fix it later. */ + if (skb_headroom(skb) < sizeof(*iwl4965_rt)) { + if (net_ratelimit()) + printk(KERN_ERR "not enough headroom [%d] for " + "radiotap head [%zd]\n", + skb_headroom(skb), sizeof(*iwl4965_rt)); + return; + } + + /* put radiotap header in front of 802.11 header and data */ + iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt)); + + /* initialise radiotap header */ + iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; + iwl4965_rt->rt_hdr.it_pad = 0; + + /* total header + data */ + put_unaligned(cpu_to_le16(sizeof(*iwl4965_rt)), &iwl4965_rt->rt_hdr.it_len); + + /* Indicate all the fields we add to the radiotap header */ + put_unaligned(cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) | + (1 << IEEE80211_RADIOTAP_FLAGS) | + (1 << IEEE80211_RADIOTAP_RATE) | + (1 << IEEE80211_RADIOTAP_CHANNEL) | + (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | + (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | + (1 << IEEE80211_RADIOTAP_ANTENNA)), + &(iwl4965_rt->rt_hdr.it_present)); + + /* Zero the flags, we'll add to them as we go */ + iwl4965_rt->rt_flags = 0; + + put_unaligned(cpu_to_le64(tsf), &iwl4965_rt->rt_tsf); + + iwl4965_rt->rt_dbmsignal = signal; + iwl4965_rt->rt_dbmnoise = noise; + + /* Convert the channel frequency and set the flags */ + put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz); + if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) + put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ), + &iwl4965_rt->rt_chbitmask); + else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) + put_unaligned(cpu_to_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ), + &iwl4965_rt->rt_chbitmask); + else /* 802.11g */ + put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ), + &iwl4965_rt->rt_chbitmask); + + if (rate == -1) + iwl4965_rt->rt_rate = 0; + else + iwl4965_rt->rt_rate = iwl_rates[rate].ieee; + + /* + * "antenna number" + * + * It seems that the antenna field in the phy flags value + * is actually a bitfield. This is undefined by radiotap, + * it wants an actual antenna number but I always get "7" + * for most legacy frames I receive indicating that the + * same frame was received on all three RX chains. + * + * I think this field should be removed in favour of a + * new 802.11n radiotap field "RX chains" that is defined + * as a bitmask. + */ + antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; + iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4; + + /* set the preamble flag if appropriate */ + if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; + + stats->flag |= RX_FLAG_RADIOTAP; +} + +static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len) +{ + /* 0 - mgmt, 1 - cnt, 2 - data */ + int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2; + priv->rx_stats[idx].cnt++; + priv->rx_stats[idx].bytes += len; +} + +/* + * returns non-zero if packet should be dropped + */ +static int iwl_set_decrypted_flag(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + u32 decrypt_res, + struct ieee80211_rx_status *stats) +{ + u16 fc = le16_to_cpu(hdr->frame_control); + + if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK) + return 0; + + if (!(fc & IEEE80211_FCTL_PROTECTED)) + return 0; + + IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res); + switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { + case RX_RES_STATUS_SEC_TYPE_TKIP: + /* The uCode has got a bad phase 1 Key, pushes the packet. + * Decryption will be done in SW. */ + if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == + RX_RES_STATUS_BAD_KEY_TTAK) + break; + + case RX_RES_STATUS_SEC_TYPE_WEP: + if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == + RX_RES_STATUS_BAD_ICV_MIC) { + /* bad ICV, the packet is destroyed since the + * decryption is inplace, drop it */ + IWL_DEBUG_RX("Packet destroyed\n"); + return -1; + } + case RX_RES_STATUS_SEC_TYPE_CCMP: + if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == + RX_RES_STATUS_DECRYPT_OK) { + IWL_DEBUG_RX("hw decrypt successfully!!!\n"); + stats->flag |= RX_FLAG_DECRYPTED; + } + break; + + default: + break; + } + return 0; +} + +static u32 iwl_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) +{ + u32 decrypt_out = 0; + + if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == + RX_RES_STATUS_STATION_FOUND) + decrypt_out |= (RX_RES_STATUS_STATION_FOUND | + RX_RES_STATUS_NO_STATION_INFO_MISMATCH); + + decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); + + /* packet was not encrypted */ + if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == + RX_RES_STATUS_SEC_TYPE_NONE) + return decrypt_out; + + /* packet was encrypted with unknown alg */ + if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == + RX_RES_STATUS_SEC_TYPE_ERR) + return decrypt_out; + + /* decryption was not done in HW */ + if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != + RX_MPDU_RES_STATUS_DEC_DONE_MSK) + return decrypt_out; + + switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { + + case RX_RES_STATUS_SEC_TYPE_CCMP: + /* alg is CCM: check MIC only */ + if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) + /* Bad MIC */ + decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; + else + decrypt_out |= RX_RES_STATUS_DECRYPT_OK; + + break; + + case RX_RES_STATUS_SEC_TYPE_TKIP: + if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { + /* Bad TTAK */ + decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; + break; + } + /* fall through if TTAK OK */ + default: + if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) + decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; + else + decrypt_out |= RX_RES_STATUS_DECRYPT_OK; + break; + }; + + IWL_DEBUG_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", + decrypt_in, decrypt_out); + + return decrypt_out; +} + +static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, + int include_phy, + struct iwl_rx_mem_buffer *rxb, + struct ieee80211_rx_status *stats) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_rx_phy_res *rx_start = (include_phy) ? + (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : NULL; + struct ieee80211_hdr *hdr; + u16 len; + __le32 *rx_end; + unsigned int skblen; + u32 ampdu_status; + u32 ampdu_status_legacy; + + if (!include_phy && priv->last_phy_res[0]) + rx_start = (struct iwl_rx_phy_res *)&priv->last_phy_res[1]; + + if (!rx_start) { + IWL_ERROR("MPDU frame without a PHY data\n"); + return; + } + if (include_phy) { + hdr = (struct ieee80211_hdr *)((u8 *) &rx_start[1] + + rx_start->cfg_phy_cnt); + + len = le16_to_cpu(rx_start->byte_count); + + rx_end = (__le32 *)((u8 *) &pkt->u.raw[0] + + sizeof(struct iwl_rx_phy_res) + + rx_start->cfg_phy_cnt + len); + + } else { + struct iwl4965_rx_mpdu_res_start *amsdu = + (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; + + hdr = (struct ieee80211_hdr *)(pkt->u.raw + + sizeof(struct iwl4965_rx_mpdu_res_start)); + len = le16_to_cpu(amsdu->byte_count); + rx_start->byte_count = amsdu->byte_count; + rx_end = (__le32 *) (((u8 *) hdr) + len); + } + + ampdu_status = le32_to_cpu(*rx_end); + skblen = ((u8 *) rx_end - (u8 *) &pkt->u.raw[0]) + sizeof(u32); + + if (!include_phy) { + /* New status scheme, need to translate */ + ampdu_status_legacy = ampdu_status; + ampdu_status = iwl_translate_rx_status(priv, ampdu_status); + } + + /* start from MAC */ + skb_reserve(rxb->skb, (void *)hdr - (void *)pkt); + skb_put(rxb->skb, len); /* end where data ends */ + + /* We only process data packets if the interface is open */ + if (unlikely(!priv->is_open)) { + IWL_DEBUG_DROP_LIMIT + ("Dropping packet while interface is not open.\n"); + return; + } + + hdr = (struct ieee80211_hdr *)rxb->skb->data; + + /* in case of HW accelerated crypto and bad decryption, drop */ + if (!priv->hw_params.sw_crypto && + iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats)) + return; + + if (priv->add_radiotap) + iwl_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status); + + iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len); + ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); + priv->alloc_rxb_skb--; + rxb->skb = NULL; +} + +/* Calc max signal level (dBm) among 3 possible receivers */ +static inline int iwl_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) +{ + return priv->cfg->ops->utils->calc_rssi(priv, rx_resp); +} + + +static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->sta_lock, flags); + priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK; + priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; + priv->stations[sta_id].sta.sta.modify_mask = 0; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); +} + +static void iwl_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr) +{ + /* FIXME: need locking over ps_status ??? */ + u8 sta_id = iwl_find_station(priv, addr); + + if (sta_id != IWL_INVALID_STATION) { + u8 sta_awake = priv->stations[sta_id]. + ps_status == STA_PS_STATUS_WAKE; + + if (sta_awake && ps_bit) + priv->stations[sta_id].ps_status = STA_PS_STATUS_SLEEP; + else if (!sta_awake && !ps_bit) { + iwl_sta_modify_ps_wake(priv, sta_id); + priv->stations[sta_id].ps_status = STA_PS_STATUS_WAKE; + } + } +} + +/* This is necessary only for a number of statistics, see the caller. */ +static int iwl_is_network_packet(struct iwl_priv *priv, + struct ieee80211_hdr *header) +{ + /* Filter incoming packets to determine if they are targeted toward + * this network, discarding packets coming from ourselves */ + switch (priv->iw_mode) { + case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */ + /* packets to our IBSS update information */ + return !compare_ether_addr(header->addr3, priv->bssid); + case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ + /* packets to our IBSS update information */ + return !compare_ether_addr(header->addr2, priv->bssid); + default: + return 1; + } +} + +/* Called for REPLY_RX (legacy ABG frames), or + * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ +void iwl_rx_reply_rx(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct ieee80211_hdr *header; + struct ieee80211_rx_status rx_status; + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + /* Use phy data (Rx signal strength, etc.) contained within + * this rx packet for legacy frames, + * or phy data cached from REPLY_RX_PHY_CMD for HT frames. */ + int include_phy = (pkt->hdr.cmd == REPLY_RX); + struct iwl_rx_phy_res *rx_start = (include_phy) ? + (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : + (struct iwl_rx_phy_res *)&priv->last_phy_res[1]; + __le32 *rx_end; + unsigned int len = 0; + u16 fc; + u8 network_packet; + + rx_status.mactime = le64_to_cpu(rx_start->timestamp); + rx_status.freq = + ieee80211_channel_to_frequency(le16_to_cpu(rx_start->channel)); + rx_status.band = (rx_start->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? + IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; + rx_status.rate_idx = + iwl_hwrate_to_plcp_idx(le32_to_cpu(rx_start->rate_n_flags)); + if (rx_status.band == IEEE80211_BAND_5GHZ) + rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; + + rx_status.antenna = 0; + rx_status.flag = 0; + + /* TSF isn't reliable. In order to allow smooth user experience, + * this W/A doesn't propagate it to the mac80211 */ + /*rx_status.flag |= RX_FLAG_TSFT;*/ + + if ((unlikely(rx_start->cfg_phy_cnt > 20))) { + IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n", + rx_start->cfg_phy_cnt); + return; + } + + if (!include_phy) { + if (priv->last_phy_res[0]) + rx_start = (struct iwl_rx_phy_res *) + &priv->last_phy_res[1]; + else + rx_start = NULL; + } + + if (!rx_start) { + IWL_ERROR("MPDU frame without a PHY data\n"); + return; + } + + if (include_phy) { + header = (struct ieee80211_hdr *)((u8 *) &rx_start[1] + + rx_start->cfg_phy_cnt); + + len = le16_to_cpu(rx_start->byte_count); + rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt + + sizeof(struct iwl_rx_phy_res) + len); + } else { + struct iwl4965_rx_mpdu_res_start *amsdu = + (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; + + header = (void *)(pkt->u.raw + + sizeof(struct iwl4965_rx_mpdu_res_start)); + len = le16_to_cpu(amsdu->byte_count); + rx_end = (__le32 *) (pkt->u.raw + + sizeof(struct iwl4965_rx_mpdu_res_start) + len); + } + + if (!(*rx_end & RX_RES_STATUS_NO_CRC32_ERROR) || + !(*rx_end & RX_RES_STATUS_NO_RXE_OVERFLOW)) { + IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", + le32_to_cpu(*rx_end)); + return; + } + + priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp); + + /* Find max signal strength (dBm) among 3 antenna/receiver chains */ + rx_status.ssi = iwl_calc_rssi(priv, rx_start); + + /* Meaningful noise values are available only from beacon statistics, + * which are gathered only when associated, and indicate noise + * only for the associated network channel ... + * Ignore these noise values while scanning (other channels) */ + if (iwl_is_associated(priv) && + !test_bit(STATUS_SCANNING, &priv->status)) { + rx_status.noise = priv->last_rx_noise; + rx_status.signal = iwl_calc_sig_qual(rx_status.ssi, + rx_status.noise); + } else { + rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE; + rx_status.signal = iwl_calc_sig_qual(rx_status.ssi, 0); + } + + /* Reset beacon noise level if not associated. */ + if (!iwl_is_associated(priv)) + priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; + + /* Set "1" to report good data frames in groups of 100 */ + /* FIXME: need to optimze the call: */ + iwl_dbg_report_frame(priv, pkt, header, 1); + + IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n", + rx_status.ssi, rx_status.noise, rx_status.signal, + (unsigned long long)rx_status.mactime); + + /* Take shortcut when only in monitor mode */ + if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { + iwl_pass_packet_to_mac80211(priv, include_phy, + rxb, &rx_status); + return; + } + + network_packet = iwl_is_network_packet(priv, header); + if (network_packet) { + priv->last_rx_rssi = rx_status.ssi; + priv->last_beacon_time = priv->ucode_beacon_time; + priv->last_tsf = le64_to_cpu(rx_start->timestamp); + } + + fc = le16_to_cpu(header->frame_control); + switch (fc & IEEE80211_FCTL_FTYPE) { + case IEEE80211_FTYPE_MGMT: + case IEEE80211_FTYPE_DATA: + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + iwl_update_ps_mode(priv, fc & IEEE80211_FCTL_PM, + header->addr2); + /* fall through */ + default: + iwl_pass_packet_to_mac80211(priv, include_phy, rxb, + &rx_status); + break; + + } +} +EXPORT_SYMBOL(iwl_rx_reply_rx); + +/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). + * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ +void iwl_rx_reply_rx_phy(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + priv->last_phy_res[0] = 1; + memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]), + sizeof(struct iwl_rx_phy_res)); +} +EXPORT_SYMBOL(iwl_rx_reply_rx_phy); diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c new file mode 100644 index 0000000..4022bea --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -0,0 +1,932 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Tomas Winkler <tomas.winkler@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ +#include <net/mac80211.h> +#include <linux/etherdevice.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-sta.h" +#include "iwl-io.h" +#include "iwl-helpers.h" + +/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after + * sending probe req. This should be set long enough to hear probe responses + * from more than one AP. */ +#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ +#define IWL_ACTIVE_DWELL_TIME_52 (20) + +#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3) +#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2) + +/* For faster active scanning, scan will move to the next channel if fewer than + * PLCP_QUIET_THRESH packets are heard on this channel within + * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell + * time if it's a quiet channel (nothing responded to our probe, and there's + * no other traffic). + * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ +#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */ +#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */ + +/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. + * Must be set longer than active dwell time. + * For the most reliable scan, set > AP beacon interval (typically 100msec). */ +#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ +#define IWL_PASSIVE_DWELL_TIME_52 (10) +#define IWL_PASSIVE_DWELL_BASE (100) +#define IWL_CHANNEL_TUNE_TIME 5 + +#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1)))) + + +static int scan_tx_ant[3] = { + RATE_MCS_ANT_A_MSK, RATE_MCS_ANT_B_MSK, RATE_MCS_ANT_C_MSK +}; + + + +static int iwl_is_empty_essid(const char *essid, int essid_len) +{ + /* Single white space is for Linksys APs */ + if (essid_len == 1 && essid[0] == ' ') + return 1; + + /* Otherwise, if the entire essid is 0, we assume it is hidden */ + while (essid_len) { + essid_len--; + if (essid[essid_len] != '\0') + return 0; + } + + return 1; +} + + + +const char *iwl_escape_essid(const char *essid, u8 essid_len) +{ + static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; + const char *s = essid; + char *d = escaped; + + if (iwl_is_empty_essid(essid, essid_len)) { + memcpy(escaped, "<hidden>", sizeof("<hidden>")); + return escaped; + } + + essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE); + while (essid_len--) { + if (*s == '\0') { + *d++ = '\\'; + *d++ = '0'; + s++; + } else + *d++ = *s++; + } + *d = '\0'; + return escaped; +} +EXPORT_SYMBOL(iwl_escape_essid); + +/** + * iwl_scan_cancel - Cancel any currently executing HW scan + * + * NOTE: priv->mutex is not required before calling this function + */ +int iwl_scan_cancel(struct iwl_priv *priv) +{ + if (!test_bit(STATUS_SCAN_HW, &priv->status)) { + clear_bit(STATUS_SCANNING, &priv->status); + return 0; + } + + if (test_bit(STATUS_SCANNING, &priv->status)) { + if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_SCAN("Queuing scan abort.\n"); + set_bit(STATUS_SCAN_ABORTING, &priv->status); + queue_work(priv->workqueue, &priv->abort_scan); + + } else + IWL_DEBUG_SCAN("Scan abort already in progress.\n"); + + return test_bit(STATUS_SCANNING, &priv->status); + } + + return 0; +} +EXPORT_SYMBOL(iwl_scan_cancel); +/** + * iwl_scan_cancel_timeout - Cancel any currently executing HW scan + * @ms: amount of time to wait (in milliseconds) for scan to abort + * + * NOTE: priv->mutex must be held before calling this function + */ +int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) +{ + unsigned long now = jiffies; + int ret; + + ret = iwl_scan_cancel(priv); + if (ret && ms) { + mutex_unlock(&priv->mutex); + while (!time_after(jiffies, now + msecs_to_jiffies(ms)) && + test_bit(STATUS_SCANNING, &priv->status)) + msleep(1); + mutex_lock(&priv->mutex); + + return test_bit(STATUS_SCANNING, &priv->status); + } + + return ret; +} +EXPORT_SYMBOL(iwl_scan_cancel_timeout); + +static int iwl_send_scan_abort(struct iwl_priv *priv) +{ + int ret = 0; + struct iwl_rx_packet *res; + struct iwl_host_cmd cmd = { + .id = REPLY_SCAN_ABORT_CMD, + .meta.flags = CMD_WANT_SKB, + }; + + /* If there isn't a scan actively going on in the hardware + * then we are in between scan bands and not actually + * actively scanning, so don't send the abort command */ + if (!test_bit(STATUS_SCAN_HW, &priv->status)) { + clear_bit(STATUS_SCAN_ABORTING, &priv->status); + return 0; + } + + ret = iwl_send_cmd_sync(priv, &cmd); + if (ret) { + clear_bit(STATUS_SCAN_ABORTING, &priv->status); + return ret; + } + + res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; + if (res->u.status != CAN_ABORT_STATUS) { + /* The scan abort will return 1 for success or + * 2 for "failure". A failure condition can be + * due to simply not being in an active scan which + * can occur if we send the scan abort before we + * the microcode has notified us that a scan is + * completed. */ + IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status); + clear_bit(STATUS_SCAN_ABORTING, &priv->status); + clear_bit(STATUS_SCAN_HW, &priv->status); + } + + priv->alloc_rxb_skb--; + dev_kfree_skb_any(cmd.meta.u.skb); + + return ret; +} + + +/* Service response to REPLY_SCAN_CMD (0x80) */ +static void iwl_rx_reply_scan(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_scanreq_notification *notif = + (struct iwl_scanreq_notification *)pkt->u.raw; + + IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status); +#endif +} + +/* Service SCAN_START_NOTIFICATION (0x82) */ +static void iwl_rx_scan_start_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_scanstart_notification *notif = + (struct iwl_scanstart_notification *)pkt->u.raw; + priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); + IWL_DEBUG_SCAN("Scan start: " + "%d [802.11%s] " + "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", + notif->channel, + notif->band ? "bg" : "a", + le32_to_cpu(notif->tsf_high), + le32_to_cpu(notif->tsf_low), + notif->status, notif->beacon_timer); +} + +/* Service SCAN_RESULTS_NOTIFICATION (0x83) */ +static void iwl_rx_scan_results_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_scanresults_notification *notif = + (struct iwl_scanresults_notification *)pkt->u.raw; + + IWL_DEBUG_SCAN("Scan ch.res: " + "%d [802.11%s] " + "(TSF: 0x%08X:%08X) - %d " + "elapsed=%lu usec (%dms since last)\n", + notif->channel, + notif->band ? "bg" : "a", + le32_to_cpu(notif->tsf_high), + le32_to_cpu(notif->tsf_low), + le32_to_cpu(notif->statistics[0]), + le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf, + jiffies_to_msecs(elapsed_jiffies + (priv->last_scan_jiffies, jiffies))); +#endif + + priv->last_scan_jiffies = jiffies; + priv->next_scan_jiffies = 0; +} + +/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ +static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw; + + IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", + scan_notif->scanned_channels, + scan_notif->tsf_low, + scan_notif->tsf_high, scan_notif->status); +#endif + + /* The HW is no longer scanning */ + clear_bit(STATUS_SCAN_HW, &priv->status); + + /* The scan completion notification came in, so kill that timer... */ + cancel_delayed_work(&priv->scan_check); + + IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n", + (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ? + "2.4" : "5.2", + jiffies_to_msecs(elapsed_jiffies + (priv->scan_pass_start, jiffies))); + + /* Remove this scanned band from the list of pending + * bands to scan, band G precedes A in order of scanning + * as seen in iwl_bg_request_scan */ + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ); + else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ); + + /* If a request to abort was given, or the scan did not succeed + * then we reset the scan state machine and terminate, + * re-queuing another scan if one has been requested */ + if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_INFO("Aborted scan completed.\n"); + clear_bit(STATUS_SCAN_ABORTING, &priv->status); + } else { + /* If there are more bands on this scan pass reschedule */ + if (priv->scan_bands) + goto reschedule; + } + + priv->last_scan_jiffies = jiffies; + priv->next_scan_jiffies = 0; + IWL_DEBUG_INFO("Setting scan to off\n"); + + clear_bit(STATUS_SCANNING, &priv->status); + + IWL_DEBUG_INFO("Scan took %dms\n", + jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies))); + + queue_work(priv->workqueue, &priv->scan_completed); + + return; + +reschedule: + priv->scan_pass_start = jiffies; + queue_work(priv->workqueue, &priv->request_scan); +} + +void iwl_setup_rx_scan_handlers(struct iwl_priv *priv) +{ + /* scan handlers */ + priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan; + priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif; + priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = + iwl_rx_scan_results_notif; + priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = + iwl_rx_scan_complete_notif; +} +EXPORT_SYMBOL(iwl_setup_rx_scan_handlers); + +static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv, + enum ieee80211_band band, + u8 n_probes) +{ + if (band == IEEE80211_BAND_5GHZ) + return IWL_ACTIVE_DWELL_TIME_52 + + IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); + else + return IWL_ACTIVE_DWELL_TIME_24 + + IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); +} + +static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, + enum ieee80211_band band) +{ + u16 passive = (band == IEEE80211_BAND_2GHZ) ? + IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : + IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; + + if (iwl_is_associated(priv)) { + /* If we're associated, we clamp the maximum passive + * dwell time to be 98% of the beacon interval (minus + * 2 * channel tune time) */ + passive = priv->beacon_int; + if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive) + passive = IWL_PASSIVE_DWELL_BASE; + passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; + } + + return passive; +} + +static int iwl_get_channels_for_scan(struct iwl_priv *priv, + enum ieee80211_band band, + u8 is_active, u8 n_probes, + struct iwl_scan_channel *scan_ch) +{ + const struct ieee80211_channel *channels = NULL; + const struct ieee80211_supported_band *sband; + const struct iwl_channel_info *ch_info; + u16 passive_dwell = 0; + u16 active_dwell = 0; + int added, i; + u16 channel; + + sband = iwl_get_hw_mode(priv, band); + if (!sband) + return 0; + + channels = sband->channels; + + active_dwell = iwl_get_active_dwell_time(priv, band, n_probes); + passive_dwell = iwl_get_passive_dwell_time(priv, band); + + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + + for (i = 0, added = 0; i < sband->n_channels; i++) { + if (channels[i].flags & IEEE80211_CHAN_DISABLED) + continue; + + channel = + ieee80211_frequency_to_channel(channels[i].center_freq); + scan_ch->channel = cpu_to_le16(channel); + + ch_info = iwl_get_channel_info(priv, band, channel); + if (!is_channel_valid(ch_info)) { + IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n", + channel); + continue; + } + + if (!is_active || is_channel_passive(ch_info) || + (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN)) + scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; + else + scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; + + if (n_probes) + scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); + + scan_ch->active_dwell = cpu_to_le16(active_dwell); + scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + + /* Set txpower levels to defaults */ + scan_ch->dsp_atten = 110; + + /* NOTE: if we were doing 6Mb OFDM for scans we'd use + * power level: + * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; + */ + if (band == IEEE80211_BAND_5GHZ) + scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; + else + scan_ch->tx_gain = ((1 << 5) | (5 << 3)); + + IWL_DEBUG_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", + channel, le32_to_cpu(scan_ch->type), + (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? + "ACTIVE" : "PASSIVE", + (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? + active_dwell : passive_dwell); + + scan_ch++; + added++; + } + + IWL_DEBUG_SCAN("total channels to scan %d \n", added); + return added; +} + +void iwl_init_scan_params(struct iwl_priv *priv) +{ + if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ]) + priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = RATE_MCS_ANT_INIT_IND; + if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ]) + priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = RATE_MCS_ANT_INIT_IND; +} + +int iwl_scan_initiate(struct iwl_priv *priv) +{ + if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { + IWL_ERROR("APs don't scan.\n"); + return 0; + } + + if (!iwl_is_ready_rf(priv)) { + IWL_DEBUG_SCAN("Aborting scan due to not ready.\n"); + return -EIO; + } + + if (test_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_SCAN("Scan already in progress.\n"); + return -EAGAIN; + } + + if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_SCAN("Scan request while abort pending. " + "Queuing.\n"); + return -EAGAIN; + } + + IWL_DEBUG_INFO("Starting scan...\n"); + if (priv->cfg->sku & IWL_SKU_G) + priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ); + if (priv->cfg->sku & IWL_SKU_A) + priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ); + set_bit(STATUS_SCANNING, &priv->status); + priv->scan_start = jiffies; + priv->scan_pass_start = priv->scan_start; + + queue_work(priv->workqueue, &priv->request_scan); + + return 0; +} +EXPORT_SYMBOL(iwl_scan_initiate); + +#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ) + +static void iwl_bg_scan_check(void *p) +{ + struct iwl_priv *priv = p; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + mutex_lock(&priv->mutex); + if (test_bit(STATUS_SCANNING, &priv->status) || + test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting " + "adapter (%dms)\n", + jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG)); + + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) + iwl_send_scan_abort(priv); + } + mutex_unlock(&priv->mutex); +} +/** + * iwl_supported_rate_to_ie - fill in the supported rate in IE field + * + * return : set the bit for each supported rate insert in ie + */ +static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate, + u16 basic_rate, int *left) +{ + u16 ret_rates = 0, bit; + int i; + u8 *cnt = ie; + u8 *rates = ie + 1; + + for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) { + if (bit & supported_rate) { + ret_rates |= bit; + rates[*cnt] = iwl_rates[i].ieee | + ((bit & basic_rate) ? 0x80 : 0x00); + (*cnt)++; + (*left)--; + if ((*left <= 0) || + (*cnt >= IWL_SUPPORTED_RATES_IE_LEN)) + break; + } + } + + return ret_rates; +} + + +static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband, + u8 *pos, int *left) +{ + struct ieee80211_ht_cap *ht_cap; + + if (!sband || !sband->ht_info.ht_supported) + return; + + if (*left < sizeof(struct ieee80211_ht_cap)) + return; + + *pos++ = sizeof(struct ieee80211_ht_cap); + ht_cap = (struct ieee80211_ht_cap *) pos; + + ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap); + memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16); + ht_cap->ampdu_params_info = + (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) | + ((sband->ht_info.ampdu_density << 2) & + IEEE80211_HT_CAP_AMPDU_DENSITY); + *left -= sizeof(struct ieee80211_ht_cap); +} + +/** + * iwl_fill_probe_req - fill in all required fields and IE for probe request + */ + +static u16 iwl_fill_probe_req(struct iwl_priv *priv, + enum ieee80211_band band, + struct ieee80211_mgmt *frame, + int left) +{ + int len = 0; + u8 *pos = NULL; + u16 active_rates, ret_rates, cck_rates, active_rate_basic; + const struct ieee80211_supported_band *sband = + iwl_get_hw_mode(priv, band); + + + /* Make sure there is enough space for the probe request, + * two mandatory IEs and the data */ + left -= 24; + if (left < 0) + return 0; + + frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); + memcpy(frame->da, iwl_bcast_addr, ETH_ALEN); + memcpy(frame->sa, priv->mac_addr, ETH_ALEN); + memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN); + frame->seq_ctrl = 0; + + len += 24; + + /* ...next IE... */ + pos = &frame->u.probe_req.variable[0]; + + /* fill in our indirect SSID IE */ + left -= 2; + if (left < 0) + return 0; + *pos++ = WLAN_EID_SSID; + *pos++ = 0; + + len += 2; + + /* fill in supported rate */ + left -= 2; + if (left < 0) + return 0; + + *pos++ = WLAN_EID_SUPP_RATES; + *pos = 0; + + /* exclude 60M rate */ + active_rates = priv->rates_mask; + active_rates &= ~IWL_RATE_60M_MASK; + + active_rate_basic = active_rates & IWL_BASIC_RATES_MASK; + + cck_rates = IWL_CCK_RATES_MASK & active_rates; + ret_rates = iwl_supported_rate_to_ie(pos, cck_rates, + active_rate_basic, &left); + active_rates &= ~ret_rates; + + ret_rates = iwl_supported_rate_to_ie(pos, active_rates, + active_rate_basic, &left); + active_rates &= ~ret_rates; + + len += 2 + *pos; + pos += (*pos) + 1; + + if (active_rates == 0) + goto fill_end; + + /* fill in supported extended rate */ + /* ...next IE... */ + left -= 2; + if (left < 0) + return 0; + /* ... fill it in... */ + *pos++ = WLAN_EID_EXT_SUPP_RATES; + *pos = 0; + iwl_supported_rate_to_ie(pos, active_rates, active_rate_basic, &left); + if (*pos > 0) { + len += 2 + *pos; + pos += (*pos) + 1; + } else { + pos--; + } + + fill_end: + + left -= 2; + if (left < 0) + return 0; + + *pos++ = WLAN_EID_HT_CAPABILITY; + *pos = 0; + iwl_ht_cap_to_ie(sband, pos, &left); + if (*pos > 0) + len += 2 + *pos; + + return (u16)len; +} + +static u32 iwl_scan_tx_ant(struct iwl_priv *priv, enum ieee80211_band band) +{ + int i, ind; + + ind = priv->scan_tx_ant[band]; + for (i = 0; i < priv->hw_params.tx_chains_num; i++) { + ind = (ind+1) >= priv->hw_params.tx_chains_num ? 0 : ind+1; + if (priv->hw_params.valid_tx_ant & (1 << ind)) { + priv->scan_tx_ant[band] = ind; + break; + } + } + IWL_DEBUG_SCAN("select TX ANT = %c\n", 'A' + ind); + return scan_tx_ant[ind]; +} + + +static void iwl_bg_request_scan(void *p) +{ + struct iwl_priv *priv = p; + struct iwl_host_cmd cmd = { + .id = REPLY_SCAN_CMD, + .len = sizeof(struct iwl_scan_cmd), + .meta.flags = CMD_SIZE_HUGE, + }; + struct iwl_scan_cmd *scan; + struct ieee80211_conf *conf = NULL; + int ret = 0; + u32 tx_ant; + u16 cmd_len; + enum ieee80211_band band; + u8 n_probes = 2; + u8 rx_chain = 0x7; /* bitmap: ABC chains */ + + conf = ieee80211_get_hw_conf(priv->hw); + + mutex_lock(&priv->mutex); + + if (!iwl_is_ready(priv)) { + IWL_WARNING("request scan called when driver not ready.\n"); + goto done; + } + + /* Make sure the scan wasn't cancelled before this queued work + * was given the chance to run... */ + if (!test_bit(STATUS_SCANNING, &priv->status)) + goto done; + + /* This should never be called or scheduled if there is currently + * a scan active in the hardware. */ + if (test_bit(STATUS_SCAN_HW, &priv->status)) { + IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. " + "Ignoring second request.\n"); + ret = -EIO; + goto done; + } + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { + IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n"); + goto done; + } + + if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { + IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n"); + goto done; + } + + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n"); + goto done; + } + + if (!test_bit(STATUS_READY, &priv->status)) { + IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n"); + goto done; + } + + if (!priv->scan_bands) { + IWL_DEBUG_HC("Aborting scan due to no requested bands\n"); + goto done; + } + + if (!priv->scan) { + priv->scan = kmalloc(sizeof(struct iwl_scan_cmd) + + IWL_MAX_SCAN_SIZE, GFP_KERNEL); + if (!priv->scan) { + ret = -ENOMEM; + goto done; + } + } + scan = priv->scan; + memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE); + + scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; + scan->quiet_time = IWL_ACTIVE_QUIET_TIME; + + if (iwl_is_associated(priv)) { + u16 interval = 0; + u32 extra; + u32 suspend_time = 100; + u32 scan_suspend_time = 100; + unsigned long flags; + + IWL_DEBUG_INFO("Scanning while associated...\n"); + + spin_lock_irqsave(&priv->lock, flags); + interval = priv->beacon_int; + spin_unlock_irqrestore(&priv->lock, flags); + + scan->suspend_time = 0; + scan->max_out_time = cpu_to_le32(200 * 1024); + if (!interval) + interval = suspend_time; + + extra = (suspend_time / interval) << 22; + scan_suspend_time = (extra | + ((suspend_time % interval) * 1024)); + scan->suspend_time = cpu_to_le32(scan_suspend_time); + IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n", + scan_suspend_time, interval); + } + + /* We should add the ability for user to lock to PASSIVE ONLY */ + if (priv->one_direct_scan) { + IWL_DEBUG_SCAN("Start direct scan for '%s'\n", + iwl_escape_essid(priv->direct_ssid, + priv->direct_ssid_len)); + scan->direct_scan[0].id = WLAN_EID_SSID; + scan->direct_scan[0].len = priv->direct_ssid_len; + memcpy(scan->direct_scan[0].ssid, + priv->direct_ssid, priv->direct_ssid_len); + n_probes++; + } else if (!iwl_is_associated(priv) && priv->essid_len) { + IWL_DEBUG_SCAN("Start direct scan for '%s' (not associated)\n", + iwl_escape_essid(priv->essid, priv->essid_len)); + scan->direct_scan[0].id = WLAN_EID_SSID; + scan->direct_scan[0].len = priv->essid_len; + memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); + n_probes++; + } else { + IWL_DEBUG_SCAN("Start indirect scan.\n"); + } + + scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; + scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id; + scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) { + band = IEEE80211_BAND_2GHZ; + scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; + tx_ant = iwl_scan_tx_ant(priv, band); + if (priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) + scan->tx_cmd.rate_n_flags = + iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP, + tx_ant); + else + scan->tx_cmd.rate_n_flags = + iwl_hw_set_rate_n_flags(IWL_RATE_1M_PLCP, + tx_ant | + RATE_MCS_CCK_MSK); + scan->good_CRC_th = 0; + } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) { + band = IEEE80211_BAND_5GHZ; + tx_ant = iwl_scan_tx_ant(priv, band); + scan->tx_cmd.rate_n_flags = + iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP, + tx_ant); + scan->good_CRC_th = IWL_GOOD_CRC_TH; + + /* Force use of chains B and C (0x6) for scan Rx for 4965 + * Avoid A (0x1) because of its off-channel reception on A-band. + * MIMO is not used here, but value is required */ + if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) + rx_chain = 0x6; + } else { + IWL_WARNING("Invalid scan band count\n"); + goto done; + } + + scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK | + cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) | + (rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) | + (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS)); + + cmd_len = iwl_fill_probe_req(priv, band, + (struct ieee80211_mgmt *)scan->data, + IWL_MAX_SCAN_SIZE - sizeof(*scan)); + + scan->tx_cmd.len = cpu_to_le16(cmd_len); + + if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) + scan->filter_flags = RXON_FILTER_PROMISC_MSK; + + scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | + RXON_FILTER_BCON_AWARE_MSK); + + scan->channel_count = + iwl_get_channels_for_scan(priv, band, 1, /* active */ + n_probes, + (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + + if (scan->channel_count == 0) { + IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count); + goto done; + } + + cmd.len += le16_to_cpu(scan->tx_cmd.len) + + scan->channel_count * sizeof(struct iwl_scan_channel); + cmd.data = scan; + scan->len = cpu_to_le16(cmd.len); + + set_bit(STATUS_SCAN_HW, &priv->status); + ret = iwl_send_cmd_sync(priv, &cmd); + if (ret) + goto done; + + queue_delayed_work(priv->workqueue, &priv->scan_check, + IWL_SCAN_CHECK_WATCHDOG); + + mutex_unlock(&priv->mutex); + return; + + done: + /* inform mac80211 scan aborted */ + queue_work(priv->workqueue, &priv->scan_completed); + mutex_unlock(&priv->mutex); +} + +static void iwl_bg_abort_scan(void *p) +{ + struct iwl_priv *priv = p; + + if (!iwl_is_ready(priv)) + return; + + mutex_lock(&priv->mutex); + + set_bit(STATUS_SCAN_ABORTING, &priv->status); + iwl_send_scan_abort(priv); + + mutex_unlock(&priv->mutex); +} + +void iwl_setup_scan_deferred_work(struct iwl_priv *priv) +{ + /* FIXME: move here when resolved PENDING + * INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); */ + INIT_WORK(&priv->request_scan, iwl_bg_request_scan, priv); + INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan, priv); + INIT_WORK(&priv->scan_check, iwl_bg_scan_check, priv); +} +EXPORT_SYMBOL(iwl_setup_scan_deferred_work); + diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 03447d6..b91d906 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -29,17 +29,446 @@ #include <linux/delay.h> #include <net/mac80211.h> +#include <linux/etherdevice.h> -#include "iwl-eeprom.h" -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-sta.h" -#include "iwl-io.h" #include "iwl-helpers.h" -#include "iwl-4965.h" -#include "iwl-sta.h" -int iwl_get_free_ucode_key_index(struct iwl_priv *priv) + +#define IWL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */ +#define IWL_STA_UCODE_ACTIVE BIT(1) /* ucode entry is active */ + +u8 iwl_find_station(struct iwl_priv *priv, const u8 *addr) +{ + int i; + int start = 0; + int ret = IWL_INVALID_STATION; + unsigned long flags; + DECLARE_MAC_BUF(mac); + + if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) || + (priv->iw_mode == IEEE80211_IF_TYPE_AP)) + start = IWL_STA_ID; + + if (is_broadcast_ether_addr(addr)) + return priv->hw_params.bcast_sta_id; + + spin_lock_irqsave(&priv->sta_lock, flags); + for (i = start; i < priv->hw_params.max_stations; i++) + if (priv->stations[i].used && + (!compare_ether_addr(priv->stations[i].sta.sta.addr, + addr))) { + ret = i; + goto out; + } + + IWL_DEBUG_ASSOC_LIMIT("can not find STA %s total %d\n", + print_mac(mac, addr), priv->num_stations); + + out: + spin_unlock_irqrestore(&priv->sta_lock, flags); + return ret; +} +EXPORT_SYMBOL(iwl_find_station); + +int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) +{ + if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { + return IWL_AP_ID; + } else { + u8 *da = ieee80211_get_DA(hdr); + return iwl_find_station(priv, da); + } +} +EXPORT_SYMBOL(iwl_get_ra_sta_id); + +static void iwl_sta_ucode_activate(struct iwl_priv *priv, u8 sta_id) +{ + unsigned long flags; + DECLARE_MAC_BUF(mac); + + spin_lock_irqsave(&priv->sta_lock, flags); + + if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) + IWL_ERROR("ACTIVATE a non DRIVER active station %d\n", sta_id); + + priv->stations[sta_id].used |= IWL_STA_UCODE_ACTIVE; + IWL_DEBUG_ASSOC("Added STA to Ucode: %s\n", + print_mac(mac, priv->stations[sta_id].sta.sta.addr)); + + spin_unlock_irqrestore(&priv->sta_lock, flags); +} + +static int iwl_add_sta_callback(struct iwl_priv *priv, + struct iwl_cmd *cmd, struct sk_buff *skb) +{ + struct iwl_rx_packet *res = NULL; + u8 sta_id = cmd->cmd.addsta.sta.sta_id; + + if (!skb) { + IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n"); + return 1; + } + + res = (struct iwl_rx_packet *)skb->data; + if (res->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n", + res->hdr.flags); + return 1; + } + + switch (res->u.add_sta.status) { + case ADD_STA_SUCCESS_MSK: + iwl_sta_ucode_activate(priv, sta_id); + /* fall through */ + default: + IWL_DEBUG_HC("Received REPLY_ADD_STA:(0x%08X)\n", + res->u.add_sta.status); + break; + } + + /* We didn't cache the SKB; let the caller free it */ + return 1; +} + +int iwl_send_add_sta(struct iwl_priv *priv, + struct iwl_addsta_cmd *sta, u8 flags) +{ + struct iwl_rx_packet *res = NULL; + int ret = 0; + u8 data[sizeof(*sta)]; + struct iwl_host_cmd cmd = { + .id = REPLY_ADD_STA, + .meta.flags = flags, + .data = data, + }; + + if (flags & CMD_ASYNC) + cmd.meta.u.callback = iwl_add_sta_callback; + else + cmd.meta.flags |= CMD_WANT_SKB; + + cmd.len = priv->cfg->ops->utils->build_addsta_hcmd(sta, data); + ret = iwl_send_cmd(priv, &cmd); + + if (ret || (flags & CMD_ASYNC)) + return ret; + + res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; + if (res->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n", + res->hdr.flags); + ret = -EIO; + } + + if (ret == 0) { + switch (res->u.add_sta.status) { + case ADD_STA_SUCCESS_MSK: + iwl_sta_ucode_activate(priv, sta->sta.sta_id); + IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n"); + break; + default: + ret = -EIO; + IWL_WARNING("REPLY_ADD_STA failed\n"); + break; + } + } + + priv->alloc_rxb_skb--; + dev_kfree_skb_any(cmd.meta.u.skb); + + return ret; +} +EXPORT_SYMBOL(iwl_send_add_sta); + +static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, + struct ieee80211_ht_info *sta_ht_inf) +{ + __le32 sta_flags; + u8 mimo_ps_mode; + + if (!sta_ht_inf || !sta_ht_inf->ht_supported) + goto done; + + mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2; + + sta_flags = priv->stations[index].sta.station_flags; + + sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK); + + switch (mimo_ps_mode) { + case WLAN_HT_CAP_MIMO_PS_STATIC: + sta_flags |= STA_FLG_MIMO_DIS_MSK; + break; + case WLAN_HT_CAP_MIMO_PS_DYNAMIC: + sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK; + break; + case WLAN_HT_CAP_MIMO_PS_DISABLED: + break; + default: + IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode); + break; + } + + sta_flags |= cpu_to_le32( + (u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS); + + sta_flags |= cpu_to_le32( + (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); + + if (iwl_is_fat_tx_allowed(priv, sta_ht_inf)) + sta_flags |= STA_FLG_FAT_EN_MSK; + else + sta_flags &= ~STA_FLG_FAT_EN_MSK; + + priv->stations[index].sta.station_flags = sta_flags; + done: + return; +} + +/** + * iwl_add_station_flags - Add station to tables in driver and device + */ +u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap, + u8 flags, struct ieee80211_ht_info *ht_info) +{ + int i; + int sta_id = IWL_INVALID_STATION; + struct iwl_station_entry *station; + unsigned long flags_spin; + DECLARE_MAC_BUF(mac); + + spin_lock_irqsave(&priv->sta_lock, flags_spin); + if (is_ap) + sta_id = IWL_AP_ID; + else if (is_broadcast_ether_addr(addr)) + sta_id = priv->hw_params.bcast_sta_id; + else + for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++) { + if (!compare_ether_addr(priv->stations[i].sta.sta.addr, + addr)) { + sta_id = i; + break; + } + + if (!priv->stations[i].used && + sta_id == IWL_INVALID_STATION) + sta_id = i; + } + + /* These two conditions have the same outcome, but keep them separate + since they have different meanings */ + if (unlikely(sta_id == IWL_INVALID_STATION)) { + spin_unlock_irqrestore(&priv->sta_lock, flags_spin); + return sta_id; + } + + if (priv->stations[sta_id].used && + !compare_ether_addr(priv->stations[sta_id].sta.sta.addr, addr)) { + spin_unlock_irqrestore(&priv->sta_lock, flags_spin); + return sta_id; + } + + + station = &priv->stations[sta_id]; + station->used = IWL_STA_DRIVER_ACTIVE; + IWL_DEBUG_ASSOC("Add STA to driver ID %d: %s\n", + sta_id, print_mac(mac, addr)); + priv->num_stations++; + + /* Set up the REPLY_ADD_STA command to send to device */ + memset(&station->sta, 0, sizeof(struct iwl_addsta_cmd)); + memcpy(station->sta.sta.addr, addr, ETH_ALEN); + station->sta.mode = 0; + station->sta.sta.sta_id = sta_id; + station->sta.station_flags = 0; + + /* BCAST station and IBSS stations do not work in HT mode */ + if (sta_id != priv->hw_params.bcast_sta_id && + priv->iw_mode != IEEE80211_IF_TYPE_IBSS) + iwl_set_ht_add_station(priv, sta_id, ht_info); + + spin_unlock_irqrestore(&priv->sta_lock, flags_spin); + + /* Add station to device's station table */ + iwl_send_add_sta(priv, &station->sta, flags); + return sta_id; + +} +EXPORT_SYMBOL(iwl_add_station_flags); + +static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr) +{ + unsigned long flags; + DECLARE_MAC_BUF(mac); + + u8 sta_id = iwl_find_station(priv, addr); + + BUG_ON(sta_id == IWL_INVALID_STATION); + + IWL_DEBUG_ASSOC("Removed STA from Ucode: %s\n", + print_mac(mac, addr)); + + spin_lock_irqsave(&priv->sta_lock, flags); + + /* Ucode must be active and driver must be non active */ + if (priv->stations[sta_id].used != IWL_STA_UCODE_ACTIVE) + IWL_ERROR("removed non active STA %d\n", sta_id); + + priv->stations[sta_id].used &= ~IWL_STA_UCODE_ACTIVE; + + memset(&priv->stations[sta_id], 0, sizeof(struct iwl_station_entry)); + spin_unlock_irqrestore(&priv->sta_lock, flags); +} + +static int iwl_remove_sta_callback(struct iwl_priv *priv, + struct iwl_cmd *cmd, struct sk_buff *skb) +{ + struct iwl_rx_packet *res = NULL; + const char *addr = cmd->cmd.rm_sta.addr; + + if (!skb) { + IWL_ERROR("Error: Response NULL in REPLY_REMOVE_STA.\n"); + return 1; + } + + res = (struct iwl_rx_packet *)skb->data; + if (res->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERROR("Bad return from REPLY_REMOVE_STA (0x%08X)\n", + res->hdr.flags); + return 1; + } + + switch (res->u.rem_sta.status) { + case REM_STA_SUCCESS_MSK: + iwl_sta_ucode_deactivate(priv, addr); + break; + default: + IWL_ERROR("REPLY_REMOVE_STA failed\n"); + break; + } + + /* We didn't cache the SKB; let the caller free it */ + return 1; +} + +static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr, + u8 flags) +{ + struct iwl_rx_packet *res = NULL; + int ret; + + struct iwl_rem_sta_cmd rm_sta_cmd; + + struct iwl_host_cmd cmd = { + .id = REPLY_REMOVE_STA, + .len = sizeof(struct iwl_rem_sta_cmd), + .meta.flags = flags, + .data = &rm_sta_cmd, + }; + + memset(&rm_sta_cmd, 0, sizeof(rm_sta_cmd)); + rm_sta_cmd.num_sta = 1; + memcpy(&rm_sta_cmd.addr, addr , ETH_ALEN); + + if (flags & CMD_ASYNC) + cmd.meta.u.callback = iwl_remove_sta_callback; + else + cmd.meta.flags |= CMD_WANT_SKB; + ret = iwl_send_cmd(priv, &cmd); + + if (ret || (flags & CMD_ASYNC)) + return ret; + + res = (struct iwl_rx_packet *)cmd.meta.u.skb->data; + if (res->hdr.flags & IWL_CMD_FAILED_MSK) { + IWL_ERROR("Bad return from REPLY_REMOVE_STA (0x%08X)\n", + res->hdr.flags); + ret = -EIO; + } + + if (!ret) { + switch (res->u.rem_sta.status) { + case REM_STA_SUCCESS_MSK: + iwl_sta_ucode_deactivate(priv, addr); + IWL_DEBUG_ASSOC("REPLY_REMOVE_STA PASSED\n"); + break; + default: + ret = -EIO; + IWL_ERROR("REPLY_REMOVE_STA failed\n"); + break; + } + } + + priv->alloc_rxb_skb--; + dev_kfree_skb_any(cmd.meta.u.skb); + + return ret; +} + +/** + * iwl_remove_station - Remove driver's knowledge of station. + */ +int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap) +{ + int sta_id = IWL_INVALID_STATION; + int i, ret = -EINVAL; + unsigned long flags; + DECLARE_MAC_BUF(mac); + + spin_lock_irqsave(&priv->sta_lock, flags); + + if (is_ap) + sta_id = IWL_AP_ID; + else if (is_broadcast_ether_addr(addr)) + sta_id = priv->hw_params.bcast_sta_id; + else + for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++) + if (priv->stations[i].used && + !compare_ether_addr(priv->stations[i].sta.sta.addr, + addr)) { + sta_id = i; + break; + } + + if (unlikely(sta_id == IWL_INVALID_STATION)) + goto out; + + IWL_DEBUG_ASSOC("Removing STA from driver:%d %s\n", + sta_id, print_mac(mac, addr)); + + if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) { + IWL_ERROR("Removing %s but non DRIVER active\n", + print_mac(mac, addr)); + goto out; + } + + if (!(priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) { + IWL_ERROR("Removing %s but non UCODE active\n", + print_mac(mac, addr)); + goto out; + } + + + priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE; + + priv->num_stations--; + + BUG_ON(priv->num_stations < 0); + + spin_unlock_irqrestore(&priv->sta_lock, flags); + + ret = iwl_send_remove_station(priv, addr, CMD_ASYNC); + return ret; +out: + spin_unlock_irqrestore(&priv->sta_lock, flags); + return ret; +} +EXPORT_SYMBOL(iwl_remove_station); + +static int iwl_get_free_ucode_key_index(struct iwl_priv *priv) { int i; @@ -92,6 +521,7 @@ int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) else return 0; } +EXPORT_SYMBOL(iwl_send_static_wepkey_cmd); int iwl_remove_default_wep_key(struct iwl_priv *priv, struct ieee80211_key_conf *keyconf) @@ -108,10 +538,13 @@ int iwl_remove_default_wep_key(struct iwl_priv *priv, priv->default_wep_key--; memset(&priv->wep_keys[keyconf->keyidx], 0, sizeof(priv->wep_keys[0])); ret = iwl_send_static_wepkey_cmd(priv, 1); + IWL_DEBUG_WEP("Remove default WEP key: idx=%d ret=%d\n", + keyconf->keyidx, ret); spin_unlock_irqrestore(&priv->sta_lock, flags); return ret; } +EXPORT_SYMBOL(iwl_remove_default_wep_key); int iwl_set_default_wep_key(struct iwl_priv *priv, struct ieee80211_key_conf *keyconf) @@ -119,6 +552,12 @@ int iwl_set_default_wep_key(struct iwl_priv *priv, int ret; unsigned long flags; + if (keyconf->keylen != WEP_KEY_LEN_128 && + keyconf->keylen != WEP_KEY_LEN_64) { + IWL_DEBUG_WEP("Bad WEP key length %d\n", keyconf->keylen); + return -EINVAL; + } + keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; keyconf->hw_key_idx = keyconf->keyidx; priv->stations[IWL_AP_ID].keyinfo.alg = ALG_WEP; @@ -135,10 +574,13 @@ int iwl_set_default_wep_key(struct iwl_priv *priv, keyconf->keylen); ret = iwl_send_static_wepkey_cmd(priv, 0); + IWL_DEBUG_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", + keyconf->keylen, keyconf->keyidx, ret); spin_unlock_irqrestore(&priv->sta_lock, flags); return ret; } +EXPORT_SYMBOL(iwl_set_default_wep_key); static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, struct ieee80211_key_conf *keyconf, @@ -164,6 +606,7 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, spin_lock_irqsave(&priv->sta_lock, flags); priv->stations[sta_id].keyinfo.alg = keyconf->alg; + priv->stations[sta_id].keyinfo.conf = keyconf; priv->stations[sta_id].keyinfo.keylen = keyconf->keylen; priv->stations[sta_id].keyinfo.keyidx = keyconf->keyidx; @@ -173,15 +616,18 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, memcpy(&priv->stations[sta_id].sta.key.key[3], keyconf->key, keyconf->keylen); - priv->stations[sta_id].sta.key.key_offset = + if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) + == STA_KEY_FLG_NO_ENC) + priv->stations[sta_id].sta.key.key_offset = iwl_get_free_ucode_key_index(priv); - priv->stations[sta_id].sta.key.key_flags = key_flags; + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - ret = iwl4965_send_add_station(priv, - &priv->stations[sta_id].sta, CMD_ASYNC); + ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); spin_unlock_irqrestore(&priv->sta_lock, flags); @@ -216,8 +662,13 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, memcpy(priv->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); - priv->stations[sta_id].sta.key.key_offset = - iwl_get_free_ucode_key_index(priv); + if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) + == STA_KEY_FLG_NO_ENC) + priv->stations[sta_id].sta.key.key_offset = + iwl_get_free_ucode_key_index(priv); + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; @@ -225,8 +676,7 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, spin_unlock_irqrestore(&priv->sta_lock, flags); IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n"); - return iwl4965_send_add_station(priv, - &priv->stations[sta_id].sta, CMD_ASYNC); + return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); } static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, @@ -243,10 +693,14 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, spin_lock_irqsave(&priv->sta_lock, flags); priv->stations[sta_id].keyinfo.alg = keyconf->alg; - priv->stations[sta_id].keyinfo.conf = keyconf; priv->stations[sta_id].keyinfo.keylen = 16; - priv->stations[sta_id].sta.key.key_offset = + + if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) + == STA_KEY_FLG_NO_ENC) + priv->stations[sta_id].sta.key.key_offset = iwl_get_free_ucode_key_index(priv); + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -258,54 +712,83 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, return ret; } -int iwl_remove_dynamic_key(struct iwl_priv *priv, u8 sta_id) +int iwl_remove_dynamic_key(struct iwl_priv *priv, + struct ieee80211_key_conf *keyconf, + u8 sta_id) { unsigned long flags; + int ret = 0; + u16 key_flags; + u8 keyidx; - priv->key_mapping_key = 0; + priv->key_mapping_key--; spin_lock_irqsave(&priv->sta_lock, flags); + key_flags = le16_to_cpu(priv->stations[sta_id].sta.key.key_flags); + keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3; + + IWL_DEBUG_WEP("Remove dynamic key: idx=%d sta=%d\n", + keyconf->keyidx, sta_id); + + if (keyconf->keyidx != keyidx) { + /* We need to remove a key with index different that the one + * in the uCode. This means that the key we need to remove has + * been replaced by another one with different index. + * Don't do anything and return ok + */ + spin_unlock_irqrestore(&priv->sta_lock, flags); + return 0; + } + if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) IWL_ERROR("index %d not used in uCode key table.\n", priv->stations[sta_id].sta.key.key_offset); memset(&priv->stations[sta_id].keyinfo, 0, - sizeof(struct iwl4965_hw_key)); + sizeof(struct iwl_hw_key)); memset(&priv->stations[sta_id].sta.key, 0, sizeof(struct iwl4965_keyinfo)); - priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; + priv->stations[sta_id].sta.key.key_flags = + STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; + priv->stations[sta_id].sta.key.key_offset = WEP_INVALID_OFFSET; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - spin_unlock_irqrestore(&priv->sta_lock, flags); - IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n"); - return iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, 0); + ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + spin_unlock_irqrestore(&priv->sta_lock, flags); + return ret; } +EXPORT_SYMBOL(iwl_remove_dynamic_key); int iwl_set_dynamic_key(struct iwl_priv *priv, - struct ieee80211_key_conf *key, u8 sta_id) + struct ieee80211_key_conf *keyconf, u8 sta_id) { int ret; - priv->key_mapping_key = 1; + priv->key_mapping_key++; - switch (key->alg) { + switch (keyconf->alg) { case ALG_CCMP: - ret = iwl_set_ccmp_dynamic_key_info(priv, key, sta_id); + ret = iwl_set_ccmp_dynamic_key_info(priv, keyconf, sta_id); break; case ALG_TKIP: - ret = iwl_set_tkip_dynamic_key_info(priv, key, sta_id); + ret = iwl_set_tkip_dynamic_key_info(priv, keyconf, sta_id); break; case ALG_WEP: - ret = iwl_set_wep_dynamic_key_info(priv, key, sta_id); + ret = iwl_set_wep_dynamic_key_info(priv, keyconf, sta_id); break; default: - IWL_ERROR("Unknown alg: %s alg = %d\n", __func__, key->alg); + IWL_ERROR("Unknown alg: %s alg = %d\n", __func__, keyconf->alg); ret = -EINVAL; } + IWL_DEBUG_WEP("Set dynamic key: alg= %d len=%d idx=%d sta=%d ret=%d\n", + keyconf->alg, keyconf->keylen, keyconf->keyidx, + sta_id, ret); + return ret; } +EXPORT_SYMBOL(iwl_set_dynamic_key); #ifdef CONFIG_IWLWIFI_DEBUG static void iwl_dump_lq_cmd(struct iwl_priv *priv, @@ -345,13 +828,173 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, if (lq->sta_id == 0xFF) lq->sta_id = IWL_AP_ID; - iwl_dump_lq_cmd(priv,lq); + iwl_dump_lq_cmd(priv, lq); - if (iwl_is_associated(priv) && priv->assoc_station_added && - priv->lq_mngr.lq_ready) + if (iwl_is_associated(priv) && priv->assoc_station_added) return iwl_send_cmd(priv, &cmd); return 0; } EXPORT_SYMBOL(iwl_send_lq_cmd); +/** + * iwl_sta_init_lq - Initialize a station's hardware rate table + * + * The uCode's station table contains a table of fallback rates + * for automatic fallback during transmission. + * + * NOTE: This sets up a default set of values. These will be replaced later + * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of + * rc80211_simple. + * + * NOTE: Run REPLY_ADD_STA command to set up station table entry, before + * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, + * which requires station table entry to exist). + */ +static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap) +{ + int i, r; + struct iwl_link_quality_cmd link_cmd = { + .reserved1 = 0, + }; + u16 rate_flags; + + /* Set up the rate scaling to start at selected rate, fall back + * all the way down to 1M in IEEE order, and then spin on 1M */ + if (is_ap) + r = IWL_RATE_54M_INDEX; + else if (priv->band == IEEE80211_BAND_5GHZ) + r = IWL_RATE_6M_INDEX; + else + r = IWL_RATE_1M_INDEX; + + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { + rate_flags = 0; + if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE) + rate_flags |= RATE_MCS_CCK_MSK; + + /* Use Tx antenna B only */ + rate_flags |= RATE_MCS_ANT_B_MSK; /*FIXME:RS*/ + + link_cmd.rs_table[i].rate_n_flags = + iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags); + r = iwl4965_get_prev_ieee_rate(r); + } + + link_cmd.general_params.single_stream_ant_msk = 2; + link_cmd.general_params.dual_stream_ant_msk = 3; + link_cmd.agg_params.agg_dis_start_th = 3; + link_cmd.agg_params.agg_time_limit = cpu_to_le16(4000); + + /* Update the rate scaling for control frame Tx to AP */ + link_cmd.sta_id = is_ap ? IWL_AP_ID : priv->hw_params.bcast_sta_id; + + iwl_send_cmd_pdu_async(priv, REPLY_TX_LINK_QUALITY_CMD, + sizeof(link_cmd), &link_cmd, NULL); +} + +/** + * iwl_rxon_add_station - add station into station table. + * + * there is only one AP station with id= IWL_AP_ID + * NOTE: mutex must be held before calling this fnction + */ +int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap) +{ + u8 sta_id; + + /* Add station to device's station table */ + struct ieee80211_conf *conf = &priv->hw->conf; + struct ieee80211_ht_info *cur_ht_config = &conf->ht_conf; + + if ((is_ap) && + (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && + (priv->iw_mode == IEEE80211_IF_TYPE_STA)) + sta_id = iwl_add_station_flags(priv, addr, is_ap, + 0, cur_ht_config); + else + sta_id = iwl_add_station_flags(priv, addr, is_ap, + 0, NULL); + + /* Set up default rate scaling table in device's station table */ + iwl_sta_init_lq(priv, addr, is_ap); + + return sta_id; +} +EXPORT_SYMBOL(iwl_rxon_add_station); + +/** + * iwl_get_sta_id - Find station's index within station table + * + * If new IBSS station, create new entry in station table + */ +int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) +{ + int sta_id; + u16 fc = le16_to_cpu(hdr->frame_control); + DECLARE_MAC_BUF(mac); + + /* If this frame is broadcast or management, use broadcast station id */ + if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) || + is_multicast_ether_addr(hdr->addr1)) + return priv->hw_params.bcast_sta_id; + + switch (priv->iw_mode) { + + /* If we are a client station in a BSS network, use the special + * AP station entry (that's the only station we communicate with) */ + case IEEE80211_IF_TYPE_STA: + return IWL_AP_ID; + + /* If we are an AP, then find the station, or use BCAST */ + case IEEE80211_IF_TYPE_AP: + sta_id = iwl_find_station(priv, hdr->addr1); + if (sta_id != IWL_INVALID_STATION) + return sta_id; + return priv->hw_params.bcast_sta_id; + + /* If this frame is going out to an IBSS network, find the station, + * or create a new station table entry */ + case IEEE80211_IF_TYPE_IBSS: + sta_id = iwl_find_station(priv, hdr->addr1); + if (sta_id != IWL_INVALID_STATION) + return sta_id; + + /* Create new station table entry */ + sta_id = iwl_add_station_flags(priv, hdr->addr1, + 0, CMD_ASYNC, NULL); + + if (sta_id != IWL_INVALID_STATION) + return sta_id; + + IWL_DEBUG_DROP("Station %s not in station map. " + "Defaulting to broadcast...\n", + print_mac(mac, hdr->addr1)); + iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr)); + return priv->hw_params.bcast_sta_id; + + default: + IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode); + return priv->hw_params.bcast_sta_id; + } +} +EXPORT_SYMBOL(iwl_get_sta_id); + +/** + * iwl_sta_modify_enable_tid_tx - Enable Tx for this TID in station table + */ +void iwl_sta_modify_enable_tid_tx(struct iwl_priv *priv, int sta_id, int tid) +{ + unsigned long flags; + + /* Remove "disable" flag, to enable Tx for this TID */ + spin_lock_irqsave(&priv->sta_lock, flags); + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; + priv->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); +} +EXPORT_SYMBOL(iwl_sta_modify_enable_tid_tx); + diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h index 44f272e..221b93e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.h +++ b/drivers/net/wireless/iwlwifi/iwl-sta.h @@ -29,21 +29,27 @@ #ifndef __iwl_sta_h__ #define __iwl_sta_h__ -#include <net/mac80211.h> +#define HW_KEY_DYNAMIC 0 +#define HW_KEY_DEFAULT 1 -#include "iwl-eeprom.h" -#include "iwl-core.h" -#include "iwl-4965.h" -#include "iwl-io.h" -#include "iwl-helpers.h" +/** + * iwl_find_station - Find station id for a given BSSID + * @bssid: MAC address of station ID to find + */ +u8 iwl_find_station(struct iwl_priv *priv, const u8 *bssid); -int iwl_get_free_ucode_key_index(struct iwl_priv *priv); int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty); int iwl_remove_default_wep_key(struct iwl_priv *priv, - struct ieee80211_key_conf *key); + struct ieee80211_key_conf *key); int iwl_set_default_wep_key(struct iwl_priv *priv, - struct ieee80211_key_conf *key); -int iwl_remove_dynamic_key(struct iwl_priv *priv, u8 sta_id); + struct ieee80211_key_conf *key); int iwl_set_dynamic_key(struct iwl_priv *priv, - struct ieee80211_key_conf *key, u8 sta_id); + struct ieee80211_key_conf *key, u8 sta_id); +int iwl_remove_dynamic_key(struct iwl_priv *priv, + struct ieee80211_key_conf *key, u8 sta_id); +int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap); +int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap); +int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr); +void iwl_sta_modify_enable_tid_tx(struct iwl_priv *priv, int sta_id, int tid); +int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr); #endif /* __iwl_sta_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c new file mode 100644 index 0000000..9cbcc9a --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -0,0 +1,1559 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/etherdevice.h> +#include <net/mac80211.h> +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-sta.h" +#include "iwl-io.h" +#include "iwl-helpers.h" + +static const u16 default_tid_to_tx_fifo[] = { + IWL_TX_FIFO_AC1, + IWL_TX_FIFO_AC0, + IWL_TX_FIFO_AC0, + IWL_TX_FIFO_AC1, + IWL_TX_FIFO_AC2, + IWL_TX_FIFO_AC2, + IWL_TX_FIFO_AC3, + IWL_TX_FIFO_AC3, + IWL_TX_FIFO_NONE, + IWL_TX_FIFO_NONE, + IWL_TX_FIFO_NONE, + IWL_TX_FIFO_NONE, + IWL_TX_FIFO_NONE, + IWL_TX_FIFO_NONE, + IWL_TX_FIFO_NONE, + IWL_TX_FIFO_NONE, + IWL_TX_FIFO_AC3 +}; + + +/** + * iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] + * + * Does NOT advance any TFD circular buffer read/write indexes + * Does NOT free the TFD itself (which is within circular buffer) + */ +int iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) +{ + struct iwl_tfd_frame *bd_tmp = (struct iwl_tfd_frame *)&txq->bd[0]; + struct iwl_tfd_frame *bd = &bd_tmp[txq->q.read_ptr]; + struct pci_dev *dev = priv->pci_dev; + int i; + int counter = 0; + int index, is_odd; + + /* Host command buffers stay mapped in memory, nothing to clean */ + if (txq->q.id == IWL_CMD_QUEUE_NUM) + return 0; + + /* Sanity check on number of chunks */ + counter = IWL_GET_BITS(*bd, num_tbs); + if (counter > MAX_NUM_OF_TBS) { + IWL_ERROR("Too many chunks: %i\n", counter); + /* @todo issue fatal error, it is quite serious situation */ + return 0; + } + + /* Unmap chunks, if any. + * TFD info for odd chunks is different format than for even chunks. */ + for (i = 0; i < counter; i++) { + index = i / 2; + is_odd = i & 0x1; + + if (is_odd) + pci_unmap_single( + dev, + IWL_GET_BITS(bd->pa[index], tb2_addr_lo16) | + (IWL_GET_BITS(bd->pa[index], + tb2_addr_hi20) << 16), + IWL_GET_BITS(bd->pa[index], tb2_len), + PCI_DMA_TODEVICE); + + else if (i > 0) + pci_unmap_single(dev, + le32_to_cpu(bd->pa[index].tb1_addr), + IWL_GET_BITS(bd->pa[index], tb1_len), + PCI_DMA_TODEVICE); + + /* Free SKB, if any, for this chunk */ + if (txq->txb[txq->q.read_ptr].skb[i]) { + struct sk_buff *skb = txq->txb[txq->q.read_ptr].skb[i]; + + dev_kfree_skb(skb); + txq->txb[txq->q.read_ptr].skb[i] = NULL; + } + } + return 0; +} +EXPORT_SYMBOL(iwl_hw_txq_free_tfd); + + +int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr, + dma_addr_t addr, u16 len) +{ + int index, is_odd; + struct iwl_tfd_frame *tfd = ptr; + u32 num_tbs = IWL_GET_BITS(*tfd, num_tbs); + + /* Each TFD can point to a maximum 20 Tx buffers */ + if ((num_tbs >= MAX_NUM_OF_TBS) || (num_tbs < 0)) { + IWL_ERROR("Error can not send more than %d chunks\n", + MAX_NUM_OF_TBS); + return -EINVAL; + } + + index = num_tbs / 2; + is_odd = num_tbs & 0x1; + + if (!is_odd) { + tfd->pa[index].tb1_addr = cpu_to_le32(addr); + IWL_SET_BITS(tfd->pa[index], tb1_addr_hi, + iwl_get_dma_hi_address(addr)); + IWL_SET_BITS(tfd->pa[index], tb1_len, len); + } else { + IWL_SET_BITS(tfd->pa[index], tb2_addr_lo16, + (u32) (addr & 0xffff)); + IWL_SET_BITS(tfd->pa[index], tb2_addr_hi20, addr >> 16); + IWL_SET_BITS(tfd->pa[index], tb2_len, len); + } + + IWL_SET_BITS(*tfd, num_tbs, num_tbs + 1); + + return 0; +} +EXPORT_SYMBOL(iwl_hw_txq_attach_buf_to_tfd); + +/** + * iwl_txq_update_write_ptr - Send new write index to hardware + */ +int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq) +{ + u32 reg = 0; + int ret = 0; + int txq_id = txq->q.id; + + if (txq->need_update == 0) + return ret; + + /* if we're trying to save power */ + if (test_bit(STATUS_POWER_PMI, &priv->status)) { + /* wake up nic if it's powered down ... + * uCode will wake up, and interrupt us again, so next + * time we'll skip this part. */ + reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); + + if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { + IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg); + iwl_set_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + return ret; + } + + /* restore this queue's parameters in nic hardware. */ + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + iwl_write_direct32(priv, HBUS_TARG_WRPTR, + txq->q.write_ptr | (txq_id << 8)); + iwl_release_nic_access(priv); + + /* else not in power-save mode, uCode will never sleep when we're + * trying to tx (during RFKILL, we're not trying to tx). */ + } else + iwl_write32(priv, HBUS_TARG_WRPTR, + txq->q.write_ptr | (txq_id << 8)); + + txq->need_update = 0; + + return ret; +} +EXPORT_SYMBOL(iwl_txq_update_write_ptr); + + +/** + * iwl_tx_queue_free - Deallocate DMA queue. + * @txq: Transmit queue to deallocate. + * + * Empty queue by removing and destroying all BD's. + * Free all buffers. + * 0-fill, but do not free "txq" descriptor structure. + */ +static void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id) +{ + struct iwl_tx_queue *txq = &priv->txq[txq_id]; + struct iwl_queue *q = &txq->q; + struct pci_dev *dev = priv->pci_dev; + int i, slots_num, len; + + if (q->n_bd == 0) + return; + + /* first, empty all BD's */ + for (; q->write_ptr != q->read_ptr; + q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) + iwl_hw_txq_free_tfd(priv, txq); + + len = sizeof(struct iwl_cmd) * q->n_window; + if (q->id == IWL_CMD_QUEUE_NUM) + len += IWL_MAX_SCAN_SIZE; + + /* De-alloc array of command/tx buffers */ + slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? + TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; + for (i = 0; i < slots_num; i++) + kfree(txq->cmd[i]); + if (txq_id == IWL_CMD_QUEUE_NUM) + kfree(txq->cmd[slots_num]); + + /* De-alloc circular buffer of TFDs */ + if (txq->q.n_bd) + pci_free_consistent(dev, sizeof(struct iwl_tfd_frame) * + txq->q.n_bd, txq->bd, txq->q.dma_addr); + + /* De-alloc array of per-TFD driver data */ + kfree(txq->txb); + txq->txb = NULL; + + /* 0-fill queue descriptor structure */ + memset(txq, 0, sizeof(*txq)); +} + +/*************** DMA-QUEUE-GENERAL-FUNCTIONS ***** + * DMA services + * + * Theory of operation + * + * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer + * of buffer descriptors, each of which points to one or more data buffers for + * the device to read from or fill. Driver and device exchange status of each + * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty + * entries in each circular buffer, to protect against confusing empty and full + * queue states. + * + * The device reads or writes the data in the queues via the device's several + * DMA/FIFO channels. Each queue is mapped to a single DMA channel. + * + * For Tx queue, there are low mark and high mark limits. If, after queuing + * the packet for Tx, free space become < low mark, Tx queue stopped. When + * reclaiming packets (on 'tx done IRQ), if free space become > high mark, + * Tx queue resumed. + * + * See more detailed info in iwl-4965-hw.h. + ***************************************************/ + +int iwl_queue_space(const struct iwl_queue *q) +{ + int s = q->read_ptr - q->write_ptr; + + if (q->read_ptr > q->write_ptr) + s -= q->n_bd; + + if (s <= 0) + s += q->n_window; + /* keep some reserve to not confuse empty and full situations */ + s -= 2; + if (s < 0) + s = 0; + return s; +} +EXPORT_SYMBOL(iwl_queue_space); + + +/** + * iwl_queue_init - Initialize queue's high/low-water and read/write indexes + */ +static int iwl_queue_init(struct iwl_priv *priv, struct iwl_queue *q, + int count, int slots_num, u32 id) +{ + q->n_bd = count; + q->n_window = slots_num; + q->id = id; + + /* count must be power-of-two size, otherwise iwl_queue_inc_wrap + * and iwl_queue_dec_wrap are broken. */ + BUG_ON(!is_power_of_2(count)); + + /* slots_num must be power-of-two size, otherwise + * get_cmd_index is broken. */ + BUG_ON(!is_power_of_2(slots_num)); + + q->low_mark = q->n_window / 4; + if (q->low_mark < 4) + q->low_mark = 4; + + q->high_mark = q->n_window / 8; + if (q->high_mark < 2) + q->high_mark = 2; + + q->write_ptr = q->read_ptr = 0; + + return 0; +} + +/** + * iwl_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue + */ +static int iwl_tx_queue_alloc(struct iwl_priv *priv, + struct iwl_tx_queue *txq, u32 id) +{ + struct pci_dev *dev = priv->pci_dev; + + /* Driver private data, only for Tx (not command) queues, + * not shared with device. */ + if (id != IWL_CMD_QUEUE_NUM) { + txq->txb = kmalloc(sizeof(txq->txb[0]) * + TFD_QUEUE_SIZE_MAX, GFP_KERNEL); + if (!txq->txb) { + IWL_ERROR("kmalloc for auxiliary BD " + "structures failed\n"); + goto error; + } + } else + txq->txb = NULL; + + /* Circular buffer of transmit frame descriptors (TFDs), + * shared with device */ + txq->bd = pci_alloc_consistent(dev, + sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX, + &txq->q.dma_addr); + + if (!txq->bd) { + IWL_ERROR("pci_alloc_consistent(%zd) failed\n", + sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX); + goto error; + } + txq->q.id = id; + + return 0; + + error: + kfree(txq->txb); + txq->txb = NULL; + + return -ENOMEM; +} + +/* + * Tell nic where to find circular buffer of Tx Frame Descriptors for + * given Tx queue, and enable the DMA channel used for that queue. + * + * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA + * channels supported in hardware. + */ +static int iwl_hw_tx_queue_init(struct iwl_priv *priv, + struct iwl_tx_queue *txq) +{ + int rc; + unsigned long flags; + int txq_id = txq->q.id; + + spin_lock_irqsave(&priv->lock, flags); + rc = iwl_grab_nic_access(priv); + if (rc) { + spin_unlock_irqrestore(&priv->lock, flags); + return rc; + } + + /* Circular buffer (TFD queue in DRAM) physical base address */ + iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id), + txq->q.dma_addr >> 8); + + /* Enable DMA channel, using same id as for TFD queue */ + iwl_write_direct32( + priv, FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL); + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +/** + * iwl_tx_queue_init - Allocate and initialize one tx/cmd queue + */ +static int iwl_tx_queue_init(struct iwl_priv *priv, + struct iwl_tx_queue *txq, + int slots_num, u32 txq_id) +{ + int i, len; + int rc = 0; + + /* + * Alloc buffer array for commands (Tx or other types of commands). + * For the command queue (#4), allocate command space + one big + * command for scan, since scan command is very huge; the system will + * not have two scans at the same time, so only one is needed. + * For normal Tx queues (all other queues), no super-size command + * space is needed. + */ + len = sizeof(struct iwl_cmd); + for (i = 0; i <= slots_num; i++) { + if (i == slots_num) { + if (txq_id == IWL_CMD_QUEUE_NUM) + len += IWL_MAX_SCAN_SIZE; + else + continue; + } + + txq->cmd[i] = kmalloc(len, GFP_KERNEL); + if (!txq->cmd[i]) + return -ENOMEM; + } + + /* Alloc driver data array and TFD circular buffer */ + rc = iwl_tx_queue_alloc(priv, txq, txq_id); + if (rc) { + for (i = 0; i < slots_num; i++) + kfree(txq->cmd[i]); + + return -ENOMEM; + } + txq->need_update = 0; + + /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise + * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */ + BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1)); + + /* Initialize queue's high/low-water marks, and head/tail indexes */ + iwl_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id); + + /* Tell device where to find queue */ + iwl_hw_tx_queue_init(priv, txq); + + return 0; +} +/** + * iwl_hw_txq_ctx_free - Free TXQ Context + * + * Destroy all TX DMA queues and structures + */ +void iwl_hw_txq_ctx_free(struct iwl_priv *priv) +{ + int txq_id; + + /* Tx queues */ + for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) + iwl_tx_queue_free(priv, txq_id); + + /* Keep-warm buffer */ + iwl_kw_free(priv); +} +EXPORT_SYMBOL(iwl_hw_txq_ctx_free); + + +/** + * iwl_txq_ctx_reset - Reset TX queue context + * Destroys all DMA structures and initialise them again + * + * @param priv + * @return error code + */ +int iwl_txq_ctx_reset(struct iwl_priv *priv) +{ + int ret = 0; + int txq_id, slots_num; + unsigned long flags; + + iwl_kw_free(priv); + + /* Free all tx/cmd queues and keep-warm buffer */ + iwl_hw_txq_ctx_free(priv); + + /* Alloc keep-warm buffer */ + ret = iwl_kw_alloc(priv); + if (ret) { + IWL_ERROR("Keep Warm allocation failed"); + goto error_kw; + } + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (unlikely(ret)) { + spin_unlock_irqrestore(&priv->lock, flags); + goto error_reset; + } + + /* Turn off all Tx DMA fifos */ + priv->cfg->ops->lib->txq_set_sched(priv, 0); + + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + + /* Tell nic where to find the keep-warm buffer */ + ret = iwl_kw_init(priv); + if (ret) { + IWL_ERROR("kw_init failed\n"); + goto error_reset; + } + + /* Alloc and init all Tx queues, including the command queue (#4) */ + for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { + slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? + TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; + ret = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num, + txq_id); + if (ret) { + IWL_ERROR("Tx %d queue init failed\n", txq_id); + goto error; + } + } + + return ret; + + error: + iwl_hw_txq_ctx_free(priv); + error_reset: + iwl_kw_free(priv); + error_kw: + return ret; +} +/** + * iwl_txq_ctx_stop - Stop all Tx DMA channels, free Tx queue memory + */ +void iwl_txq_ctx_stop(struct iwl_priv *priv) +{ + + int txq_id; + unsigned long flags; + + + /* Turn off all Tx DMA fifos */ + spin_lock_irqsave(&priv->lock, flags); + if (iwl_grab_nic_access(priv)) { + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + + priv->cfg->ops->lib->txq_set_sched(priv, 0); + + /* Stop each Tx DMA channel, and wait for it to be idle */ + for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { + iwl_write_direct32(priv, + FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), 0x0); + iwl_poll_direct_bit(priv, FH_TSSR_TX_STATUS_REG, + FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE + (txq_id), 200); + } + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + /* Deallocate memory for all Tx queues */ + iwl_hw_txq_ctx_free(priv); +} +EXPORT_SYMBOL(iwl_txq_ctx_stop); + +/* + * handle build REPLY_TX command notification. + */ +static void iwl_tx_cmd_build_basic(struct iwl_priv *priv, + struct iwl_tx_cmd *tx_cmd, + struct ieee80211_tx_control *ctrl, + struct ieee80211_hdr *hdr, + int is_unicast, u8 std_id) +{ + __le16 fc = hdr->frame_control; + __le32 tx_flags = tx_cmd->tx_flags; + + tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + if (!(ctrl->flags & IEEE80211_TXCTL_NO_ACK)) { + tx_flags |= TX_CMD_FLG_ACK_MSK; + if (ieee80211_is_mgmt(fc)) + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + if (ieee80211_is_probe_resp(fc) && + !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) + tx_flags |= TX_CMD_FLG_TSF_MSK; + } else { + tx_flags &= (~TX_CMD_FLG_ACK_MSK); + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + } + + if (ieee80211_is_back_req(fc)) + tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; + + + tx_cmd->sta_id = std_id; + if (ieee80211_has_morefrags(fc)) + tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; + + if (ieee80211_is_data_qos(fc)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + tx_cmd->tid_tspec = qc[0] & 0xf; + tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; + } else { + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + } + + priv->cfg->ops->utils->rts_tx_cmd_flag(ctrl, &tx_flags); + + if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK)) + tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK; + + tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); + if (ieee80211_is_mgmt(fc)) { + if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) + tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); + else + tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); + } else { + tx_cmd->timeout.pm_frame_timeout = 0; + } + + tx_cmd->driver_txop = 0; + tx_cmd->tx_flags = tx_flags; + tx_cmd->next_frame_len = 0; +} + +#define RTS_HCCA_RETRY_LIMIT 3 +#define RTS_DFAULT_RETRY_LIMIT 60 + +static void iwl_tx_cmd_build_rate(struct iwl_priv *priv, + struct iwl_tx_cmd *tx_cmd, + struct ieee80211_tx_control *ctrl, + __le16 fc, int sta_id, + int is_hcca) +{ + u8 rts_retry_limit = 0; + u8 data_retry_limit = 0; + u8 rate_plcp; + u16 rate_flags = 0; + int rate_idx; + + rate_idx = min(ctrl->tx_rate->hw_value & 0xffff, + IWL_RATE_COUNT - 1); + + rate_plcp = iwl_rates[rate_idx].plcp; + + rts_retry_limit = (is_hcca) ? + RTS_HCCA_RETRY_LIMIT : RTS_DFAULT_RETRY_LIMIT; + + if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE)) + rate_flags |= RATE_MCS_CCK_MSK; + + + if (ieee80211_is_probe_resp(fc)) { + data_retry_limit = 3; + if (data_retry_limit < rts_retry_limit) + rts_retry_limit = data_retry_limit; + } else + data_retry_limit = IWL_DEFAULT_TX_RETRY; + + if (priv->data_retry_limit != -1) + data_retry_limit = priv->data_retry_limit; + + + if (ieee80211_is_data(fc)) { + tx_cmd->initial_rate_index = 0; + tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; + } else { + switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { + case cpu_to_le16(IEEE80211_STYPE_AUTH): + case cpu_to_le16(IEEE80211_STYPE_DEAUTH): + case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): + case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): + if (tx_cmd->tx_flags & TX_CMD_FLG_RTS_MSK) { + tx_cmd->tx_flags &= ~TX_CMD_FLG_RTS_MSK; + tx_cmd->tx_flags |= TX_CMD_FLG_CTS_MSK; + } + break; + default: + break; + } + + /* Alternate between antenna A and B for successive frames */ + if (priv->use_ant_b_for_management_frame) { + priv->use_ant_b_for_management_frame = 0; + rate_flags |= RATE_MCS_ANT_B_MSK; + } else { + priv->use_ant_b_for_management_frame = 1; + rate_flags |= RATE_MCS_ANT_A_MSK; + } + } + + tx_cmd->rts_retry_limit = rts_retry_limit; + tx_cmd->data_retry_limit = data_retry_limit; + tx_cmd->rate_n_flags = iwl_hw_set_rate_n_flags(rate_plcp, rate_flags); +} + +static void iwl_tx_cmd_build_hwcrypto(struct iwl_priv *priv, + struct ieee80211_tx_control *ctl, + struct iwl_tx_cmd *tx_cmd, + struct sk_buff *skb_frag, + int sta_id) +{ + struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo; + struct iwl_wep_key *wepkey; + + switch (keyinfo->alg) { + case ALG_CCMP: + tx_cmd->sec_ctl = TX_CMD_SEC_CCM; + memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen); + if (ctl->flags & IEEE80211_TXCTL_AMPDU) + tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; + IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n"); + break; + + case ALG_TKIP: + tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; + ieee80211_get_tkip_key(keyinfo->conf, skb_frag, + IEEE80211_TKIP_P2_KEY, tx_cmd->key); + IWL_DEBUG_TX("tx_cmd with tkip hwcrypto\n"); + break; + + case ALG_WEP: + wepkey = &priv->wep_keys[ctl->key_idx]; + + if (priv->default_wep_key) { + /* the WEP key was sent as static */ + memcpy(&tx_cmd->key[3], wepkey->key, wepkey->key_size); + if (wepkey->key_size == WEP_KEY_LEN_128) + tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; + } else { + /* the WEP key was sent as dynamic */ + memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen); + if (keyinfo->keylen == WEP_KEY_LEN_128) + tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; + } + + tx_cmd->sec_ctl |= (TX_CMD_SEC_WEP | + (ctl->key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT); + + IWL_DEBUG_TX("Configuring packet for WEP encryption " + "with key %d\n", ctl->key_idx); + break; + + default: + printk(KERN_ERR "Unknown encode alg %d\n", keyinfo->alg); + break; + } +} + +static void iwl_update_tx_stats(struct iwl_priv *priv, u16 fc, u16 len) +{ + /* 0 - mgmt, 1 - cnt, 2 - data */ + int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2; + priv->tx_stats[idx].cnt++; + priv->tx_stats[idx].bytes += len; +} + +/* + * start REPLY_TX command process + */ +int iwl_tx_skb(struct iwl_priv *priv, + struct sk_buff *skb, struct ieee80211_tx_control *ctl) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct iwl_tfd_frame *tfd; + struct iwl_tx_queue *txq; + struct iwl_queue *q; + struct iwl_cmd *out_cmd; + struct iwl_tx_cmd *tx_cmd; + int swq_id, txq_id; + dma_addr_t phys_addr; + dma_addr_t txcmd_phys; + dma_addr_t scratch_phys; + u16 len, idx, len_org; + u16 seq_number = 0; + __le16 fc; + u8 hdr_len, unicast; + u8 sta_id; + u8 wait_write_ptr = 0; + u8 tid = 0; + u8 *qc = NULL; + unsigned long flags; + int ret; + + spin_lock_irqsave(&priv->lock, flags); + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_DROP("Dropping - RF KILL\n"); + goto drop_unlock; + } + + if (!priv->vif) { + IWL_DEBUG_DROP("Dropping - !priv->vif\n"); + goto drop_unlock; + } + + if ((ctl->tx_rate->hw_value & 0xFF) == + IWL_INVALID_RATE) { + IWL_ERROR("ERROR: No TX rate available.\n"); + goto drop_unlock; + } + + unicast = !is_multicast_ether_addr(hdr->addr1); + + fc = hdr->frame_control; + +#ifdef CONFIG_IWLWIFI_DEBUG + if (ieee80211_is_auth(fc)) + IWL_DEBUG_TX("Sending AUTH frame\n"); + else if (ieee80211_is_assoc_req(fc)) + IWL_DEBUG_TX("Sending ASSOC frame\n"); + else if (ieee80211_is_reassoc_req(fc)) + IWL_DEBUG_TX("Sending REASSOC frame\n"); +#endif + + /* drop all data frame if we are not associated */ + if (ieee80211_is_data(fc) && + (!iwl_is_associated(priv) || + ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id) || + !priv->assoc_station_added)) { + IWL_DEBUG_DROP("Dropping - !iwl_is_associated\n"); + goto drop_unlock; + } + + spin_unlock_irqrestore(&priv->lock, flags); + + hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc)); + + /* Find (or create) index into station table for destination station */ + sta_id = iwl_get_sta_id(priv, hdr); + if (sta_id == IWL_INVALID_STATION) { + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_DROP("Dropping - INVALID STATION: %s\n", + print_mac(mac, hdr->addr1)); + goto drop; + } + + IWL_DEBUG_TX("station Id %d\n", sta_id); + + swq_id = ctl->queue; + txq_id = swq_id; + if (ieee80211_is_data_qos(fc)) { + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; + seq_number = priv->stations[sta_id].tid[tid].seq_number; + seq_number &= IEEE80211_SCTL_SEQ; + hdr->seq_ctrl = hdr->seq_ctrl & + __constant_cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(seq_number); + seq_number += 0x10; + /* aggregation is on for this <sta,tid> */ + if (ctl->flags & IEEE80211_TXCTL_AMPDU) + txq_id = priv->stations[sta_id].tid[tid].agg.txq_id; + priv->stations[sta_id].tid[tid].tfds_in_queue++; + } + + /* Descriptor for chosen Tx queue */ + txq = &priv->txq[txq_id]; + q = &txq->q; + + spin_lock_irqsave(&priv->lock, flags); + + /* Set up first empty TFD within this queue's circular TFD buffer */ + tfd = &txq->bd[q->write_ptr]; + memset(tfd, 0, sizeof(*tfd)); + idx = get_cmd_index(q, q->write_ptr, 0); + + /* Set up driver data for this TFD */ + memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info)); + txq->txb[q->write_ptr].skb[0] = skb; + memcpy(&(txq->txb[q->write_ptr].status.control), + ctl, sizeof(struct ieee80211_tx_control)); + + /* Set up first empty entry in queue's array of Tx/cmd buffers */ + out_cmd = txq->cmd[idx]; + tx_cmd = &out_cmd->cmd.tx; + memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); + memset(tx_cmd, 0, sizeof(struct iwl_tx_cmd)); + + /* + * Set up the Tx-command (not MAC!) header. + * Store the chosen Tx queue and TFD index within the sequence field; + * after Tx, uCode's Tx response will return this value so driver can + * locate the frame within the tx queue and do post-tx processing. + */ + out_cmd->hdr.cmd = REPLY_TX; + out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | + INDEX_TO_SEQ(q->write_ptr))); + + /* Copy MAC header from skb into command buffer */ + memcpy(tx_cmd->hdr, hdr, hdr_len); + + /* + * Use the first empty entry in this queue's command buffer array + * to contain the Tx command and MAC header concatenated together + * (payload data will be in another buffer). + * Size of this varies, due to varying MAC header length. + * If end is not dword aligned, we'll have 2 extra bytes at the end + * of the MAC header (device reads on dword boundaries). + * We'll tell device about this padding later. + */ + len = sizeof(struct iwl_tx_cmd) + + sizeof(struct iwl_cmd_header) + hdr_len; + + len_org = len; + len = (len + 3) & ~3; + + if (len_org != len) + len_org = 1; + else + len_org = 0; + + /* Physical address of this Tx command's header (not MAC header!), + * within command buffer array. */ + txcmd_phys = pci_map_single(priv->pci_dev, out_cmd, + sizeof(struct iwl_cmd), PCI_DMA_TODEVICE); + txcmd_phys += offsetof(struct iwl_cmd, hdr); + + /* Add buffer containing Tx command and MAC(!) header to TFD's + * first entry */ + iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len); + + if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) + iwl_tx_cmd_build_hwcrypto(priv, ctl, tx_cmd, skb, sta_id); + + /* Set up TFD's 2nd entry to point directly to remainder of skb, + * if any (802.11 null frames have no payload). */ + len = skb->len - hdr_len; + if (len) { + phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len, + len, PCI_DMA_TODEVICE); + iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, len); + } + + /* Tell NIC about any 2-byte padding after MAC header */ + if (len_org) + tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; + + /* Total # bytes to be transmitted */ + len = (u16)skb->len; + tx_cmd->len = cpu_to_le16(len); + /* TODO need this for burst mode later on */ + iwl_tx_cmd_build_basic(priv, tx_cmd, ctl, hdr, unicast, sta_id); + + /* set is_hcca to 0; it probably will never be implemented */ + iwl_tx_cmd_build_rate(priv, tx_cmd, ctl, fc, sta_id, 0); + + iwl_update_tx_stats(priv, le16_to_cpu(fc), len); + + scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) + + offsetof(struct iwl_tx_cmd, scratch); + tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); + tx_cmd->dram_msb_ptr = iwl_get_dma_hi_address(scratch_phys); + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + if (qc) + priv->stations[sta_id].tid[tid].seq_number = seq_number; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } + + iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd)); + + iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); + + /* Set up entry for this TFD in Tx byte-count array */ + priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, len); + + /* Tell device the write index *just past* this latest filled TFD */ + q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); + ret = iwl_txq_update_write_ptr(priv, txq); + spin_unlock_irqrestore(&priv->lock, flags); + + if (ret) + return ret; + + if ((iwl_queue_space(q) < q->high_mark) && priv->mac80211_registered) { + if (wait_write_ptr) { + spin_lock_irqsave(&priv->lock, flags); + txq->need_update = 1; + iwl_txq_update_write_ptr(priv, txq); + spin_unlock_irqrestore(&priv->lock, flags); + } else { + ieee80211_stop_queue(priv->hw, swq_id); + } + } + + return 0; + +drop_unlock: + spin_unlock_irqrestore(&priv->lock, flags); +drop: + return -1; +} +EXPORT_SYMBOL(iwl_tx_skb); + +/*************** HOST COMMAND QUEUE FUNCTIONS *****/ + +/** + * iwl_enqueue_hcmd - enqueue a uCode command + * @priv: device private data point + * @cmd: a point to the ucode command structure + * + * The function returns < 0 values to indicate the operation is + * failed. On success, it turns the index (> 0) of command in the + * command queue. + */ +int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) +{ + struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM]; + struct iwl_queue *q = &txq->q; + struct iwl_tfd_frame *tfd; + struct iwl_cmd *out_cmd; + dma_addr_t phys_addr; + unsigned long flags; + int len, ret; + u32 idx; + u16 fix_size; + + cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len); + fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr)); + + /* If any of the command structures end up being larger than + * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then + * we will need to increase the size of the TFD entries */ + BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) && + !(cmd->meta.flags & CMD_SIZE_HUGE)); + + if (iwl_is_rfkill(priv)) { + IWL_DEBUG_INFO("Not sending command - RF KILL"); + return -EIO; + } + + if (iwl_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) { + IWL_ERROR("No space for Tx\n"); + return -ENOSPC; + } + + spin_lock_irqsave(&priv->hcmd_lock, flags); + + tfd = &txq->bd[q->write_ptr]; + memset(tfd, 0, sizeof(*tfd)); + + + idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE); + out_cmd = txq->cmd[idx]; + + out_cmd->hdr.cmd = cmd->id; + memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta)); + memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len); + + /* At this point, the out_cmd now has all of the incoming cmd + * information */ + + out_cmd->hdr.flags = 0; + out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) | + INDEX_TO_SEQ(q->write_ptr)); + if (out_cmd->meta.flags & CMD_SIZE_HUGE) + out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME); + len = (idx == TFD_CMD_SLOTS) ? + IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); + phys_addr = pci_map_single(priv->pci_dev, out_cmd, len, + PCI_DMA_TODEVICE); + phys_addr += offsetof(struct iwl_cmd, hdr); + iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size); + + IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, " + "%d bytes at %d[%d]:%d\n", + get_cmd_string(out_cmd->hdr.cmd), + out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence), + fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM); + + txq->need_update = 1; + + /* Set up entry in queue's byte count circular buffer */ + priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0); + + /* Increment and update queue's write index */ + q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); + ret = iwl_txq_update_write_ptr(priv, txq); + + spin_unlock_irqrestore(&priv->hcmd_lock, flags); + return ret ? ret : idx; +} + +int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) +{ + struct iwl_tx_queue *txq = &priv->txq[txq_id]; + struct iwl_queue *q = &txq->q; + struct iwl_tx_info *tx_info; + int nfreed = 0; + + if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) { + IWL_ERROR("Read index for DMA queue txq id (%d), index %d, " + "is out of range [0-%d] %d %d.\n", txq_id, + index, q->n_bd, q->write_ptr, q->read_ptr); + return 0; + } + + for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index; + q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { + + tx_info = &txq->txb[txq->q.read_ptr]; + ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb[0], + &tx_info->status); + tx_info->skb[0] = NULL; + + if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl) + priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq); + + iwl_hw_txq_free_tfd(priv, txq); + nfreed++; + } + return nfreed; +} +EXPORT_SYMBOL(iwl_tx_queue_reclaim); + + +/** + * iwl_hcmd_queue_reclaim - Reclaim TX command queue entries already Tx'd + * + * When FW advances 'R' index, all entries between old and new 'R' index + * need to be reclaimed. As result, some free space forms. If there is + * enough free space (> low mark), wake the stack that feeds us. + */ +static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) +{ + struct iwl_tx_queue *txq = &priv->txq[txq_id]; + struct iwl_queue *q = &txq->q; + struct iwl_tfd_frame *bd = &txq->bd[index]; + dma_addr_t dma_addr; + int is_odd, buf_len; + int nfreed = 0; + + if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) { + IWL_ERROR("Read index for DMA queue txq id (%d), index %d, " + "is out of range [0-%d] %d %d.\n", txq_id, + index, q->n_bd, q->write_ptr, q->read_ptr); + return; + } + + for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index; + q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { + + if (nfreed > 1) { + IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index, + q->write_ptr, q->read_ptr); + queue_work(priv->workqueue, &priv->restart); + } + is_odd = (index/2) & 0x1; + if (is_odd) { + dma_addr = IWL_GET_BITS(bd->pa[index], tb2_addr_lo16) | + (IWL_GET_BITS(bd->pa[index], + tb2_addr_hi20) << 16); + buf_len = IWL_GET_BITS(bd->pa[index], tb2_len); + } else { + dma_addr = le32_to_cpu(bd->pa[index].tb1_addr); + buf_len = IWL_GET_BITS(bd->pa[index], tb1_len); + } + + pci_unmap_single(priv->pci_dev, dma_addr, buf_len, + PCI_DMA_TODEVICE); + nfreed++; + } +} + +/** + * iwl_tx_cmd_complete - Pull unused buffers off the queue and reclaim them + * @rxb: Rx buffer to reclaim + * + * If an Rx buffer has an async callback associated with it the callback + * will be executed. The attached skb (if present) will only be freed + * if the callback returns 1 + */ +void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + int txq_id = SEQ_TO_QUEUE(sequence); + int index = SEQ_TO_INDEX(sequence); + int huge = sequence & SEQ_HUGE_FRAME; + int cmd_index; + struct iwl_cmd *cmd; + + /* If a Tx command is being handled and it isn't in the actual + * command queue then there a command routing bug has been introduced + * in the queue management code. */ + if (txq_id != IWL_CMD_QUEUE_NUM) + IWL_ERROR("Error wrong command queue %d command id 0x%X\n", + txq_id, pkt->hdr.cmd); + BUG_ON(txq_id != IWL_CMD_QUEUE_NUM); + + cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge); + cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; + + /* Input error checking is done when commands are added to queue. */ + if (cmd->meta.flags & CMD_WANT_SKB) { + cmd->meta.source->u.skb = rxb->skb; + rxb->skb = NULL; + } else if (cmd->meta.u.callback && + !cmd->meta.u.callback(priv, cmd, rxb->skb)) + rxb->skb = NULL; + + iwl_hcmd_queue_reclaim(priv, txq_id, index); + + if (!(cmd->meta.flags & CMD_ASYNC)) { + clear_bit(STATUS_HCMD_ACTIVE, &priv->status); + wake_up_interruptible(&priv->wait_command_queue); + } +} +EXPORT_SYMBOL(iwl_tx_cmd_complete); + +/* + * Find first available (lowest unused) Tx Queue, mark it "active". + * Called only when finding queue for aggregation. + * Should never return anything < 7, because they should already + * be in use as EDCA AC (0-3), Command (4), HCCA (5, 6). + */ +static int iwl_txq_ctx_activate_free(struct iwl_priv *priv) +{ + int txq_id; + + for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) + if (!test_and_set_bit(txq_id, &priv->txq_ctx_active_msk)) + return txq_id; + return -1; +} + +int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn) +{ + int sta_id; + int tx_fifo; + int txq_id; + int ret; + unsigned long flags; + struct iwl_tid_data *tid_data; + DECLARE_MAC_BUF(mac); + + if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo))) + tx_fifo = default_tid_to_tx_fifo[tid]; + else + return -EINVAL; + + IWL_WARNING("%s on ra = %s tid = %d\n", + __func__, print_mac(mac, ra), tid); + + sta_id = iwl_find_station(priv, ra); + if (sta_id == IWL_INVALID_STATION) + return -ENXIO; + + if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) { + IWL_ERROR("Start AGG when state is not IWL_AGG_OFF !\n"); + return -ENXIO; + } + + txq_id = iwl_txq_ctx_activate_free(priv); + if (txq_id == -1) + return -ENXIO; + + spin_lock_irqsave(&priv->sta_lock, flags); + tid_data = &priv->stations[sta_id].tid[tid]; + *ssn = SEQ_TO_SN(tid_data->seq_number); + tid_data->agg.txq_id = txq_id; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + ret = priv->cfg->ops->lib->txq_agg_enable(priv, txq_id, tx_fifo, + sta_id, tid, *ssn); + if (ret) + return ret; + + if (tid_data->tfds_in_queue == 0) { + printk(KERN_ERR "HW queue is empty\n"); + tid_data->agg.state = IWL_AGG_ON; + ieee80211_start_tx_ba_cb_irqsafe(priv->hw, ra, tid); + } else { + IWL_DEBUG_HT("HW queue is NOT empty: %d packets in HW queue\n", + tid_data->tfds_in_queue); + tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA; + } + return ret; +} +EXPORT_SYMBOL(iwl_tx_agg_start); + +int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid) +{ + int tx_fifo_id, txq_id, sta_id, ssn = -1; + struct iwl_tid_data *tid_data; + int ret, write_ptr, read_ptr; + unsigned long flags; + DECLARE_MAC_BUF(mac); + + if (!ra) { + IWL_ERROR("ra = NULL\n"); + return -EINVAL; + } + + if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo))) + tx_fifo_id = default_tid_to_tx_fifo[tid]; + else + return -EINVAL; + + sta_id = iwl_find_station(priv, ra); + + if (sta_id == IWL_INVALID_STATION) + return -ENXIO; + + if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON) + IWL_WARNING("Stopping AGG while state not IWL_AGG_ON\n"); + + tid_data = &priv->stations[sta_id].tid[tid]; + ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; + txq_id = tid_data->agg.txq_id; + write_ptr = priv->txq[txq_id].q.write_ptr; + read_ptr = priv->txq[txq_id].q.read_ptr; + + /* The queue is not empty */ + if (write_ptr != read_ptr) { + IWL_DEBUG_HT("Stopping a non empty AGG HW QUEUE\n"); + priv->stations[sta_id].tid[tid].agg.state = + IWL_EMPTYING_HW_QUEUE_DELBA; + return 0; + } + + IWL_DEBUG_HT("HW queue is empty\n"); + priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF; + + spin_lock_irqsave(&priv->lock, flags); + ret = priv->cfg->ops->lib->txq_agg_disable(priv, txq_id, ssn, + tx_fifo_id); + spin_unlock_irqrestore(&priv->lock, flags); + + if (ret) + return ret; + + ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid); + + return 0; +} +EXPORT_SYMBOL(iwl_tx_agg_stop); + +int iwl_txq_check_empty(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id) +{ + struct iwl_queue *q = &priv->txq[txq_id].q; + u8 *addr = priv->stations[sta_id].sta.sta.addr; + struct iwl_tid_data *tid_data = &priv->stations[sta_id].tid[tid]; + + switch (priv->stations[sta_id].tid[tid].agg.state) { + case IWL_EMPTYING_HW_QUEUE_DELBA: + /* We are reclaiming the last packet of the */ + /* aggregated HW queue */ + if (txq_id == tid_data->agg.txq_id && + q->read_ptr == q->write_ptr) { + u16 ssn = SEQ_TO_SN(tid_data->seq_number); + int tx_fifo = default_tid_to_tx_fifo[tid]; + IWL_DEBUG_HT("HW queue empty: continue DELBA flow\n"); + priv->cfg->ops->lib->txq_agg_disable(priv, txq_id, + ssn, tx_fifo); + tid_data->agg.state = IWL_AGG_OFF; + ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, addr, tid); + } + break; + case IWL_EMPTYING_HW_QUEUE_ADDBA: + /* We are reclaiming the last packet of the queue */ + if (tid_data->tfds_in_queue == 0) { + IWL_DEBUG_HT("HW queue empty: continue ADDBA flow\n"); + tid_data->agg.state = IWL_AGG_ON; + ieee80211_start_tx_ba_cb_irqsafe(priv->hw, addr, tid); + } + break; + } + return 0; +} +EXPORT_SYMBOL(iwl_txq_check_empty); + +/** + * iwl_tx_status_reply_compressed_ba - Update tx status from block-ack + * + * Go through block-ack's bitmap of ACK'd frames, update driver's record of + * ACK vs. not. This gets sent to mac80211, then to rate scaling algo. + */ +static int iwl_tx_status_reply_compressed_ba(struct iwl_priv *priv, + struct iwl_ht_agg *agg, + struct iwl_compressed_ba_resp *ba_resp) + +{ + int i, sh, ack; + u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl); + u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); + u64 bitmap; + int successes = 0; + struct ieee80211_tx_status *tx_status; + + if (unlikely(!agg->wait_for_ba)) { + IWL_ERROR("Received BA when not expected\n"); + return -EINVAL; + } + + /* Mark that the expected block-ack response arrived */ + agg->wait_for_ba = 0; + IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl); + + /* Calculate shift to align block-ack bits with our Tx window bits */ + sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl>>4); + if (sh < 0) /* tbw something is wrong with indices */ + sh += 0x100; + + /* don't use 64-bit values for now */ + bitmap = le64_to_cpu(ba_resp->bitmap) >> sh; + + if (agg->frame_count > (64 - sh)) { + IWL_DEBUG_TX_REPLY("more frames than bitmap size"); + return -1; + } + + /* check for success or failure according to the + * transmitted bitmap and block-ack bitmap */ + bitmap &= agg->bitmap; + + /* For each frame attempted in aggregation, + * update driver's record of tx frame's status. */ + for (i = 0; i < agg->frame_count ; i++) { + ack = bitmap & (1ULL << i); + successes += !!ack; + IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", + ack? "ACK":"NACK", i, (agg->start_idx + i) & 0xff, + agg->start_idx + i); + } + + tx_status = &priv->txq[scd_flow].txb[agg->start_idx].status; + tx_status->flags = IEEE80211_TX_STATUS_ACK; + tx_status->flags |= IEEE80211_TX_STATUS_AMPDU; + tx_status->ampdu_ack_map = successes; + tx_status->ampdu_ack_len = agg->frame_count; + iwl_hwrate_to_tx_control(priv, agg->rate_n_flags, &tx_status->control); + + IWL_DEBUG_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap); + + return 0; +} + +/** + * iwl_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA + * + * Handles block-acknowledge notification from device, which reports success + * of frames sent via aggregation. + */ +void iwl_rx_reply_compressed_ba(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; + struct iwl_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba; + int index; + struct iwl_tx_queue *txq = NULL; + struct iwl_ht_agg *agg; + DECLARE_MAC_BUF(mac); + + /* "flow" corresponds to Tx queue */ + u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); + + /* "ssn" is start of block-ack Tx window, corresponds to index + * (in Tx queue's circular buffer) of first TFD/frame in window */ + u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); + + if (scd_flow >= priv->hw_params.max_txq_num) { + IWL_ERROR("BUG_ON scd_flow is bigger than number of queues"); + return; + } + + txq = &priv->txq[scd_flow]; + agg = &priv->stations[ba_resp->sta_id].tid[ba_resp->tid].agg; + + /* Find index just before block-ack window */ + index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); + + /* TODO: Need to get this copy more safely - now good for debug */ + + IWL_DEBUG_TX_REPLY("REPLY_COMPRESSED_BA [%d]Received from %s, " + "sta_id = %d\n", + agg->wait_for_ba, + print_mac(mac, (u8 *) &ba_resp->sta_addr_lo32), + ba_resp->sta_id); + IWL_DEBUG_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx, scd_flow = " + "%d, scd_ssn = %d\n", + ba_resp->tid, + ba_resp->seq_ctl, + (unsigned long long)le64_to_cpu(ba_resp->bitmap), + ba_resp->scd_flow, + ba_resp->scd_ssn); + IWL_DEBUG_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx \n", + agg->start_idx, + (unsigned long long)agg->bitmap); + + /* Update driver's record of ACK vs. not for each frame in window */ + iwl_tx_status_reply_compressed_ba(priv, agg, ba_resp); + + /* Release all TFDs before the SSN, i.e. all TFDs in front of + * block-ack window (we assume that they've been successfully + * transmitted ... if not, it's too late anyway). */ + if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { + /* calculate mac80211 ampdu sw queue to wake */ + int ampdu_q = + scd_flow - priv->hw_params.first_ampdu_q + priv->hw->queues; + int freed = iwl_tx_queue_reclaim(priv, scd_flow, index); + priv->stations[ba_resp->sta_id]. + tid[ba_resp->tid].tfds_in_queue -= freed; + if (iwl_queue_space(&txq->q) > txq->q.low_mark && + priv->mac80211_registered && + agg->state != IWL_EMPTYING_HW_QUEUE_DELBA) + ieee80211_wake_queue(priv->hw, ampdu_q); + + iwl_txq_check_empty(priv, ba_resp->sta_id, + ba_resp->tid, scd_flow); + } +} +EXPORT_SYMBOL(iwl_rx_reply_compressed_ba); + +#ifdef CONFIG_IWLWIFI_DEBUG +#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x + +const char *iwl_get_tx_fail_reason(u32 status) +{ + switch (status & TX_STATUS_MSK) { + case TX_STATUS_SUCCESS: + return "SUCCESS"; + TX_STATUS_ENTRY(SHORT_LIMIT); + TX_STATUS_ENTRY(LONG_LIMIT); + TX_STATUS_ENTRY(FIFO_UNDERRUN); + TX_STATUS_ENTRY(MGMNT_ABORT); + TX_STATUS_ENTRY(NEXT_FRAG); + TX_STATUS_ENTRY(LIFE_EXPIRE); + TX_STATUS_ENTRY(DEST_PS); + TX_STATUS_ENTRY(ABORTED); + TX_STATUS_ENTRY(BT_RETRY); + TX_STATUS_ENTRY(STA_INVALID); + TX_STATUS_ENTRY(FRAG_DROPPED); + TX_STATUS_ENTRY(TID_DISABLE); + TX_STATUS_ENTRY(FRAME_FLUSHED); + TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); + TX_STATUS_ENTRY(TX_LOCKED); + TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); + } + + return "UNKNOWN"; +} +EXPORT_SYMBOL(iwl_get_tx_fail_reason); +#endif /* CONFIG_IWLWIFI_DEBUG */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index d30028c..11dc792 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -102,16 +102,6 @@ MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -static __le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr) -{ - u16 fc = le16_to_cpu(hdr->frame_control); - int hdr_len = ieee80211_get_hdrlen(fc); - - if ((fc & 0x00cc) == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA)) - return (__le16 *) ((u8 *) hdr + hdr_len - QOS_CONTROL_LEN); - return NULL; -} - static const struct ieee80211_supported_band *iwl3945_get_band( struct iwl3945_priv *priv, enum ieee80211_band band) { @@ -285,10 +275,8 @@ static int iwl3945_tx_queue_alloc(struct iwl3945_priv *priv, return 0; error: - if (txq->txb) { - kfree(txq->txb); - txq->txb = NULL; - } + kfree(txq->txb); + txq->txb = NULL; return -ENOMEM; } @@ -375,10 +363,8 @@ void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *t txq->q.n_bd, txq->bd, txq->q.dma_addr); /* De-alloc array of per-TFD driver data */ - if (txq->txb) { - kfree(txq->txb); - txq->txb = NULL; - } + kfree(txq->txb); + txq->txb = NULL; /* 0-fill queue descriptor structure */ memset(txq, 0, sizeof(*txq)); @@ -547,10 +533,20 @@ static inline int iwl3945_is_init(struct iwl3945_priv *priv) return test_bit(STATUS_INIT, &priv->status); } +static inline int iwl3945_is_rfkill_sw(struct iwl3945_priv *priv) +{ + return test_bit(STATUS_RF_KILL_SW, &priv->status); +} + +static inline int iwl3945_is_rfkill_hw(struct iwl3945_priv *priv) +{ + return test_bit(STATUS_RF_KILL_HW, &priv->status); +} + static inline int iwl3945_is_rfkill(struct iwl3945_priv *priv) { - return test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status); + return iwl3945_is_rfkill_hw(priv) || + iwl3945_is_rfkill_sw(priv); } static inline int iwl3945_is_ready_rf(struct iwl3945_priv *priv) @@ -980,7 +976,7 @@ static int iwl3945_full_rxon_required(struct iwl3945_priv *priv) { /* These items are only settable from the full RXON command */ - if (!(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) || + if (!(iwl3945_is_associated(priv)) || compare_ether_addr(priv->staging_rxon.bssid_addr, priv->active_rxon.bssid_addr) || compare_ether_addr(priv->staging_rxon.node_addr, @@ -2035,36 +2031,6 @@ static int iwl3945_send_power_mode(struct iwl3945_priv *priv, u32 mode) return rc; } -int iwl3945_is_network_packet(struct iwl3945_priv *priv, struct ieee80211_hdr *header) -{ - /* Filter incoming packets to determine if they are targeted toward - * this network, discarding packets coming from ourselves */ - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */ - /* packets from our adapter are dropped (echo) */ - if (!compare_ether_addr(header->addr2, priv->mac_addr)) - return 0; - /* {broad,multi}cast packets to our IBSS go through */ - if (is_multicast_ether_addr(header->addr1)) - return !compare_ether_addr(header->addr3, priv->bssid); - /* packets to our adapter go through */ - return !compare_ether_addr(header->addr1, priv->mac_addr); - case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ - /* packets from our adapter are dropped (echo) */ - if (!compare_ether_addr(header->addr3, priv->mac_addr)) - return 0; - /* {broad,multi}cast packets to our BSS go through */ - if (is_multicast_ether_addr(header->addr1)) - return !compare_ether_addr(header->addr2, priv->bssid); - /* packets to our adapter go through */ - return !compare_ether_addr(header->addr1, priv->mac_addr); - default: - return 1; - } - - return 1; -} - /** * iwl3945_scan_cancel - Cancel any currently executing HW scan * @@ -2117,20 +2083,6 @@ static int iwl3945_scan_cancel_timeout(struct iwl3945_priv *priv, unsigned long return ret; } -static void iwl3945_sequence_reset(struct iwl3945_priv *priv) -{ - /* Reset ieee stats */ - - /* We don't reset the net_device_stats (ieee->stats) on - * re-association */ - - priv->last_seq_num = -1; - priv->last_frag_num = -1; - priv->last_packet_time = 0; - - iwl3945_scan_cancel(priv); -} - #define MAX_UCODE_BEACON_INTERVAL 1024 #define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA) @@ -2322,7 +2274,7 @@ static void iwl3945_connection_init_rx_config(struct iwl3945_priv *priv) #endif ch_info = iwl3945_get_channel_info(priv, priv->band, - le16_to_cpu(priv->staging_rxon.channel)); + le16_to_cpu(priv->active_rxon.channel)); if (!ch_info) ch_info = &priv->channel_info[0]; @@ -2394,7 +2346,8 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv, struct sk_buff *skb_frag, int last_frag) { - struct iwl3945_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo; + struct iwl3945_hw_key *keyinfo = + &priv->stations[ctl->key_idx].keyinfo; switch (keyinfo->alg) { case ALG_CCMP: @@ -2443,16 +2396,15 @@ static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv, struct ieee80211_hdr *hdr, int is_unicast, u8 std_id) { - __le16 *qc; - u16 fc = le16_to_cpu(hdr->frame_control); + __le16 fc = hdr->frame_control; __le32 tx_flags = cmd->cmd.tx.tx_flags; cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; if (!(ctrl->flags & IEEE80211_TXCTL_NO_ACK)) { tx_flags |= TX_CMD_FLG_ACK_MSK; - if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) + if (ieee80211_is_mgmt(fc)) tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - if (ieee80211_is_probe_response(fc) && + if (ieee80211_is_probe_resp(fc) && !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) tx_flags |= TX_CMD_FLG_TSF_MSK; } else { @@ -2461,15 +2413,16 @@ static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv, } cmd->cmd.tx.sta_id = std_id; - if (ieee80211_get_morefrag(hdr)) + if (ieee80211_has_morefrags(fc)) tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; - qc = ieee80211_get_qos_ctrl(hdr); - if (qc) { - cmd->cmd.tx.tid_tspec = (u8) (le16_to_cpu(*qc) & 0xf); + if (ieee80211_is_data_qos(fc)) { + u8 *qc = ieee80211_get_qos_ctl(hdr); + cmd->cmd.tx.tid_tspec = qc[0] & 0xf; tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; - } else + } else { tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + } if (ctrl->flags & IEEE80211_TXCTL_USE_RTS_CTS) { tx_flags |= TX_CMD_FLG_RTS_MSK; @@ -2483,9 +2436,8 @@ static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv, tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK; tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); - if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { - if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ || - (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ) + if (ieee80211_is_mgmt(fc)) { + if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(3); else cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(2); @@ -2549,6 +2501,11 @@ static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *h iwl3945_print_hex_dump(IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr)); return priv->hw_setting.bcast_sta_id; } + /* If we are in monitor mode, use BCAST. This is required for + * packet injection. */ + case IEEE80211_IF_TYPE_MNTR: + return priv->hw_setting.bcast_sta_id; + default: IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode); return priv->hw_setting.bcast_sta_id; @@ -2570,13 +2527,15 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, dma_addr_t phys_addr; dma_addr_t txcmd_phys; struct iwl3945_cmd *out_cmd = NULL; - u16 len, idx, len_org; - u8 id, hdr_len, unicast; + u16 len, idx, len_org, hdr_len; + u8 id; + u8 unicast; u8 sta_id; + u8 tid = 0; u16 seq_number = 0; - u16 fc; - __le16 *qc; + __le16 fc; u8 wait_write_ptr = 0; + u8 *qc = NULL; unsigned long flags; int rc; @@ -2586,11 +2545,6 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, goto drop_unlock; } - if (!priv->vif) { - IWL_DEBUG_DROP("Dropping - !priv->vif\n"); - goto drop_unlock; - } - if ((ctl->tx_rate->hw_value & 0xFF) == IWL_INVALID_RATE) { IWL_ERROR("ERROR: No TX rate available.\n"); goto drop_unlock; @@ -2599,28 +2553,29 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, unicast = !is_multicast_ether_addr(hdr->addr1); id = 0; - fc = le16_to_cpu(hdr->frame_control); + fc = hdr->frame_control; #ifdef CONFIG_IWL3945_DEBUG if (ieee80211_is_auth(fc)) IWL_DEBUG_TX("Sending AUTH frame\n"); - else if (ieee80211_is_assoc_request(fc)) + else if (ieee80211_is_assoc_req(fc)) IWL_DEBUG_TX("Sending ASSOC frame\n"); - else if (ieee80211_is_reassoc_request(fc)) + else if (ieee80211_is_reassoc_req(fc)) IWL_DEBUG_TX("Sending REASSOC frame\n"); #endif /* drop all data frame if we are not associated */ - if ((!iwl3945_is_associated(priv) || - ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id)) && - ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)) { + if (ieee80211_is_data(fc) && + (priv->iw_mode != IEEE80211_IF_TYPE_MNTR) && /* packet injection */ + (!iwl3945_is_associated(priv) || + ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id))) { IWL_DEBUG_DROP("Dropping - !iwl3945_is_associated\n"); goto drop_unlock; } spin_unlock_irqrestore(&priv->lock, flags); - hdr_len = ieee80211_get_hdrlen(fc); + hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc)); /* Find (or create) index into station table for destination station */ sta_id = iwl3945_get_sta_id(priv, hdr); @@ -2634,9 +2589,9 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, IWL_DEBUG_RATE("station Id %d\n", sta_id); - qc = ieee80211_get_qos_ctrl(hdr); - if (qc) { - u8 tid = (u8)(le16_to_cpu(*qc) & 0xf); + if (ieee80211_is_data_qos(fc)) { + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & 0xf; seq_number = priv->stations[sta_id].tid[tid].seq_number & IEEE80211_SCTL_SEQ; hdr->seq_ctrl = cpu_to_le16(seq_number) | @@ -2744,12 +2699,10 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; - if (!ieee80211_get_morefrag(hdr)) { + if (!ieee80211_has_morefrags(hdr->frame_control)) { txq->need_update = 1; - if (qc) { - u8 tid = (u8)(le16_to_cpu(*qc) & 0xf); + if (qc) priv->stations[sta_id].tid[tid].seq_number = seq_number; - } } else { wait_write_ptr = 1; txq->need_update = 0; @@ -2759,7 +2712,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, sizeof(out_cmd->cmd.tx)); iwl3945_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr, - ieee80211_get_hdrlen(fc)); + ieee80211_get_hdrlen(le16_to_cpu(fc))); /* Tell device the write index *just past* this latest filled TFD */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); @@ -2888,7 +2841,8 @@ static void iwl3945_radio_kill_sw(struct iwl3945_priv *priv, int disable_radio) return; } - queue_work(priv->workqueue, &priv->restart); + if (priv->is_open) + queue_work(priv->workqueue, &priv->restart); return; } @@ -2924,72 +2878,6 @@ void iwl3945_set_decrypted_flag(struct iwl3945_priv *priv, struct sk_buff *skb, } } -#define IWL_PACKET_RETRY_TIME HZ - -int iwl3945_is_duplicate_packet(struct iwl3945_priv *priv, struct ieee80211_hdr *header) -{ - u16 sc = le16_to_cpu(header->seq_ctrl); - u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4; - u16 frag = sc & IEEE80211_SCTL_FRAG; - u16 *last_seq, *last_frag; - unsigned long *last_time; - - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_IBSS:{ - struct list_head *p; - struct iwl3945_ibss_seq *entry = NULL; - u8 *mac = header->addr2; - int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1); - - __list_for_each(p, &priv->ibss_mac_hash[index]) { - entry = list_entry(p, struct iwl3945_ibss_seq, list); - if (!compare_ether_addr(entry->mac, mac)) - break; - } - if (p == &priv->ibss_mac_hash[index]) { - entry = kzalloc(sizeof(*entry), GFP_ATOMIC); - if (!entry) { - IWL_ERROR("Cannot malloc new mac entry\n"); - return 0; - } - memcpy(entry->mac, mac, ETH_ALEN); - entry->seq_num = seq; - entry->frag_num = frag; - entry->packet_time = jiffies; - list_add(&entry->list, &priv->ibss_mac_hash[index]); - return 0; - } - last_seq = &entry->seq_num; - last_frag = &entry->frag_num; - last_time = &entry->packet_time; - break; - } - case IEEE80211_IF_TYPE_STA: - last_seq = &priv->last_seq_num; - last_frag = &priv->last_frag_num; - last_time = &priv->last_packet_time; - break; - default: - return 0; - } - if ((*last_seq == seq) && - time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) { - if (*last_frag == frag) - goto drop; - if (*last_frag + 1 != frag) - /* out-of-order fragment */ - goto drop; - } else - *last_seq = seq; - - *last_frag = frag; - *last_time = jiffies; - return 0; - - drop: - return 1; -} - #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT #include "iwl-spectrum.h" @@ -3921,7 +3809,7 @@ int iwl3945_calc_db_from_ratio(int sig_ratio) /* 100:1 or higher, divide by 10 and use table, * add 20 dB to make up for divide by 10 */ if (sig_ratio >= 100) - return (20 + (int)ratio2dB[sig_ratio/10]); + return 20 + (int)ratio2dB[sig_ratio/10]; /* We shouldn't see this */ if (sig_ratio < 1) @@ -4847,7 +4735,7 @@ static int iwl3945_init_channel_map(struct iwl3945_priv *priv) ch_info->scan_power = eeprom_ch_info[ch].max_power_avg; ch_info->min_power = 0; - IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x" + IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x" " %ddBm): Ad-Hoc %ssupported\n", ch_info->channel, is_channel_a_band(ch_info) ? @@ -4857,7 +4745,6 @@ static int iwl3945_init_channel_map(struct iwl3945_priv *priv) CHECK_AND_PRINT(ACTIVE), CHECK_AND_PRINT(RADAR), CHECK_AND_PRINT(WIDE), - CHECK_AND_PRINT(NARROW), CHECK_AND_PRINT(DFS), eeprom_ch_info[ch].flags, eeprom_ch_info[ch].max_power_avg, @@ -4993,9 +4880,6 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, if (scan_ch->type & 1) scan_ch->type |= (direct_mask << 1); - if (is_channel_narrow(ch_info)) - scan_ch->type |= (1 << 7); - scan_ch->active_dwell = cpu_to_le16(active_dwell); scan_ch->passive_dwell = cpu_to_le16(passive_dwell); @@ -5200,7 +5084,7 @@ static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv *priv) * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host, * looking at all data. */ -static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 * image, u32 len) +static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 *image, u32 len) { u32 val; u32 save_len = len; @@ -5349,7 +5233,7 @@ static int iwl3945_verify_bsm(struct iwl3945_priv *priv) val = iwl3945_read_prph(priv, BSM_WR_DWCOUNT_REG); for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len; - reg += sizeof(u32), image ++) { + reg += sizeof(u32), image++) { val = iwl3945_read_prph(priv, reg); if (val != le32_to_cpu(*image)) { IWL_ERROR("BSM uCode verification failed at " @@ -5842,7 +5726,7 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) if (iwl3945_is_rfkill(priv)) return; - ieee80211_start_queues(priv->hw); + ieee80211_wake_queues(priv->hw); priv->active_rate = priv->rates_mask; priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; @@ -5868,9 +5752,6 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) /* Configure the adapter for unassociated operation */ iwl3945_commit_rxon(priv); - /* At this point, the NIC is initialized and operational */ - priv->notif_missed_beacons = 0; - iwl3945_reg_txpower_periodic(priv); iwl3945_led_register(priv); @@ -5937,7 +5818,9 @@ static void __iwl3945_down(struct iwl3945_priv *priv) test_bit(STATUS_GEO_CONFIGURED, &priv->status) << STATUS_GEO_CONFIGURED | test_bit(STATUS_IN_SUSPEND, &priv->status) << - STATUS_IN_SUSPEND; + STATUS_IN_SUSPEND | + test_bit(STATUS_EXIT_PENDING, &priv->status) << + STATUS_EXIT_PENDING; goto exit; } @@ -5952,7 +5835,9 @@ static void __iwl3945_down(struct iwl3945_priv *priv) test_bit(STATUS_IN_SUSPEND, &priv->status) << STATUS_IN_SUSPEND | test_bit(STATUS_FW_ERROR, &priv->status) << - STATUS_FW_ERROR; + STATUS_FW_ERROR | + test_bit(STATUS_EXIT_PENDING, &priv->status) << + STATUS_EXIT_PENDING; spin_lock_irqsave(&priv->lock, flags); iwl3945_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); @@ -6084,6 +5969,7 @@ static int __iwl3945_up(struct iwl3945_priv *priv) set_bit(STATUS_EXIT_PENDING, &priv->status); __iwl3945_down(priv); + clear_bit(STATUS_EXIT_PENDING, &priv->status); /* tried to restart and config the device for as long as our * patience could withstand */ @@ -6149,6 +6035,25 @@ static void iwl3945_bg_rf_kill(void *p) "Kill switch must be turned off for " "wireless networking to work.\n"); } + + mutex_unlock(&priv->mutex); + iwl3945_rfkill_set_hw_state(priv); +} + +static void iwl3945_bg_set_monitor(void *p) +{ + struct iwl3945_priv *priv = p; + + IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n"); + + mutex_lock(&priv->mutex); + + if (!iwl3945_is_ready(priv)) + IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n"); + else + if (iwl3945_set_mode(priv, IEEE80211_IF_TYPE_MNTR) != 0) + IWL_ERROR("iwl3945_set_mode() failed\n"); + mutex_unlock(&priv->mutex); } @@ -6383,6 +6288,7 @@ static void iwl3945_bg_up(void *p) mutex_lock(&priv->mutex); __iwl3945_up(priv); mutex_unlock(&priv->mutex); + iwl3945_rfkill_set_hw_state(priv); } static void iwl3945_bg_restart(void *p) @@ -6419,7 +6325,7 @@ static void iwl3945_bg_post_associate(void *p) DECLARE_MAC_BUF(mac); if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__); + IWL_ERROR("%s Should not be called in AP mode\n", __func__); return; } @@ -6500,12 +6406,10 @@ static void iwl3945_bg_post_associate(void *p) default: IWL_ERROR("%s Should not be called in %d mode\n", - __FUNCTION__, priv->iw_mode); + __func__, priv->iw_mode); break; } - iwl3945_sequence_reset(priv); - iwl3945_activate_qos(priv, 0); /* we have just associated, don't start scan too early */ @@ -6600,6 +6504,8 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw) mutex_unlock(&priv->mutex); + iwl3945_rfkill_set_hw_state(priv); + if (ret) goto out_release_irq; @@ -6677,12 +6583,6 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, IWL_DEBUG_MAC80211("enter\n"); - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - IWL_DEBUG_MAC80211("leave - monitor\n"); - dev_kfree_skb_any(skb); - return 0; - } - IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, ctl->tx_rate->bitrate); @@ -6829,7 +6729,7 @@ static void iwl3945_config_ap(struct iwl3945_priv *priv) return; /* The following should be done only at AP bring up */ - if ((priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) == 0) { + if (!(iwl3945_is_associated(priv))) { /* RXON - unassoc (to set timing command) */ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; @@ -6878,6 +6778,12 @@ static void iwl3945_config_ap(struct iwl3945_priv *priv) * clear sta table, add BCAST sta... */ } +#if 0 /* Not in RHEL5 */ +/* temporary */ +static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control); +#endif + static int iwl3945_mac_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_if_conf *conf) @@ -6895,10 +6801,23 @@ static int iwl3945_mac_config_interface(struct ieee80211_hw *hw, return 0; } +#if 0 /* Not in RHEL5 */ + /* handle this temporarily here */ + if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS && + conf->changed & IEEE80211_IFCC_BEACON) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + if (!beacon) + return -ENOMEM; + rc = iwl3945_mac_beacon_update(hw, beacon); + if (rc) + return rc; + } +#endif + /* XXX: this MUST use conf->mac_addr */ if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && - (!conf->beacon || !conf->ssid_len)) { + (!conf->ssid_len)) { IWL_DEBUG_MAC80211 ("Leaving in AP mode because HostAPD is not ready.\n"); return 0; @@ -6991,11 +6910,18 @@ static void iwl3945_configure_filter(struct ieee80211_hw *hw, unsigned int *total_flags, int mc_count, struct dev_addr_list *mc_list) { - /* - * XXX: dummy - * see also iwl3945_connection_init_rx_config - */ - *total_flags = 0; + struct iwl3945_priv *priv = hw->priv; + + if (changed_flags & (*total_flags) & FIF_OTHER_BSS) { + IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n", + IEEE80211_IF_TYPE_MNTR, + changed_flags, *total_flags); + /* queue work 'cuz mac80211 is holding a lock which + * prevents us from issuing (synchronous) f/w cmds */ + queue_work(priv->workqueue, &priv->set_monitor); + } + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | + FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; } static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw, @@ -7053,9 +6979,10 @@ static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) rc = -EAGAIN; goto out_unlock; } - /* if we just finished scan ask for delay */ - if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies + - IWL_DELAY_NEXT_SCAN, jiffies)) { + /* if we just finished scan ask for delay for a broadcast scan */ + if ((len == 0) && priv->last_scan_jiffies && + time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN, + jiffies)) { rc = -EAGAIN; goto out_unlock; } @@ -7307,8 +7234,9 @@ static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw) } +#if 0 /* Not in RHEL5 */ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) + struct ieee80211_tx_control *control) { struct iwl3945_priv *priv = hw->priv; unsigned long flags; @@ -7348,6 +7276,7 @@ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk return 0; } +#endif /***************************************************************************** * @@ -7390,37 +7319,6 @@ static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, #endif /* CONFIG_IWL3945_DEBUG */ -static ssize_t show_rf_kill(struct device *d, - struct device_attribute *attr, char *buf) -{ - /* - * 0 - RF kill not enabled - * 1 - SW based RF kill active (sysfs) - * 2 - HW based RF kill active - * 3 - Both HW and SW based RF kill active - */ - struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data; - int val = (test_bit(STATUS_RF_KILL_SW, &priv->status) ? 0x1 : 0x0) | - (test_bit(STATUS_RF_KILL_HW, &priv->status) ? 0x2 : 0x0); - - return sprintf(buf, "%i\n", val); -} - -static ssize_t store_rf_kill(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data; - - mutex_lock(&priv->mutex); - iwl3945_radio_kill_sw(priv, buf[0] == '1'); - mutex_unlock(&priv->mutex); - - return count; -} - -static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill); - static ssize_t show_temperature(struct device *d, struct device_attribute *attr, char *buf) { @@ -7549,7 +7447,7 @@ static ssize_t show_measurement(struct device *d, struct iwl3945_priv *priv = dev_get_drvdata(d); struct iwl3945_spectrum_notification measure_report; u32 size = sizeof(measure_report), len = 0, ofs = 0; - u8 *data = (u8 *) & measure_report; + u8 *data = (u8 *)&measure_report; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); @@ -7720,7 +7618,7 @@ static ssize_t show_power_level(struct device *d, else p += sprintf(p, " \n"); - return (p - buf + 1); + return p - buf + 1; } @@ -7742,7 +7640,7 @@ static ssize_t show_statistics(struct device *d, struct iwl3945_priv *priv = dev_get_drvdata(d); u32 size = sizeof(struct iwl3945_notif_statistics); u32 len = 0, ofs = 0; - u8 *data = (u8 *) & priv->statistics; + u8 *data = (u8 *)&priv->statistics; int rc = 0; if (!iwl3945_is_alive(priv)) @@ -7871,6 +7769,7 @@ static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv) INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan, priv); INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill, priv); INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update, priv); + INIT_WORK(&priv->set_monitor, iwl3945_bg_set_monitor, priv); INIT_WORK(&priv->post_associate, iwl3945_bg_post_associate, priv); INIT_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start, priv); INIT_WORK(&priv->alive_start, iwl3945_bg_alive_start, priv); @@ -7915,7 +7814,6 @@ static struct attribute *iwl3945_sysfs_entries[] = { #endif &dev_attr_power_level.attr, &dev_attr_retry_rate.attr, - &dev_attr_rf_kill.attr, &dev_attr_rs_window.attr, &dev_attr_statistics.attr, &dev_attr_status.attr, @@ -7945,7 +7843,6 @@ static struct ieee80211_ops iwl3945_hw_ops = { .conf_tx = iwl3945_mac_conf_tx, .get_tsf = iwl3945_mac_get_tsf, .reset_tsf = iwl3945_mac_reset_tsf, - .beacon_update = iwl3945_mac_beacon_update, .hw_scan = iwl3945_mac_hw_scan }; @@ -7955,7 +7852,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e struct iwl3945_priv *priv; struct ieee80211_hw *hw; struct iwl_3945_cfg *cfg = (struct iwl_3945_cfg *)(ent->driver_data); - int i; unsigned long flags; DECLARE_MAC_BUF(mac); @@ -8008,9 +7904,9 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e * Negative values for level/noise indicate that we'll provide dBm. * For WE, at least, non-0 values here *enable* display of values * in app (iwconfig). */ - hw->max_rssi = -20; /* signal level, negative indicates dBm */ - hw->max_noise = -20; /* noise level, negative indicates dBm */ - hw->max_signal = 100; /* link quality indication (%) */ + hw->max_rssi = -20; /* signal level, negative indicates dBm */ + hw->max_noise = -20; /* noise level, negative indicates dBm */ + hw->max_signal = 100; /* link quality indication (%) */ /* Tell mac80211 our Tx characteristics */ hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE; @@ -8023,9 +7919,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e spin_lock_init(&priv->sta_lock); spin_lock_init(&priv->hcmd_lock); - for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) - INIT_LIST_HEAD(&priv->ibss_mac_hash[i]); - INIT_LIST_HEAD(&priv->free_frames); mutex_init(&priv->mutex); @@ -8119,16 +8012,16 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e /* nic init */ iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (err < 0) { - IWL_DEBUG_INFO("Failed to init the card\n"); + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + + iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (err < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); goto out_remove_sysfs; - } + } /* Read the EEPROM */ err = iwl3945_eeprom_init(priv); if (err) { @@ -8163,6 +8056,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e pci_save_state(pdev); pci_disable_device(pdev); + err = iwl3945_rfkill_init(priv); + if (err) + IWL_ERROR("Unable to initialize RFKILL system. " + "Ignoring error: %d\n", err); + return 0; out_free_geos: @@ -8193,8 +8091,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) { struct iwl3945_priv *priv = pci_get_drvdata(pdev); - struct list_head *p, *q; - int i; unsigned long flags; if (!priv) @@ -8215,16 +8111,9 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) iwl_synchronize_irq(priv); - /* Free MAC hash list for ADHOC */ - for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) { - list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) { - list_del(p); - kfree(list_entry(p, struct iwl3945_ibss_seq, list)); - } - } - sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); + iwl3945_rfkill_unregister(priv); iwl3945_dealloc_ucode_pci(priv); if (priv->rxq.bd) @@ -8234,9 +8123,8 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) iwl3945_unset_hw_setting(priv); iwl3945_clear_stations_table(priv); - if (priv->mac80211_registered) { + if (priv->mac80211_registered) ieee80211_unregister_hw(priv->hw); - } /*netif_stop_queue(dev); */ flush_workqueue(priv->workqueue); @@ -8254,7 +8142,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) iwl3945_free_channel_map(priv); iwl3945_free_geos(priv); - + kfree(priv->scan); if (priv->ibss_beacon) dev_kfree_skb(priv->ibss_beacon); @@ -8293,6 +8181,114 @@ static int iwl3945_pci_resume(struct pci_dev *pdev) #endif /* CONFIG_PM */ +/*************** RFKILL FUNCTIONS **********/ +#ifdef CONFIG_IWL3945_RFKILL +/* software rf-kill from user */ +static int iwl3945_rfkill_soft_rf_kill(void *data, enum rfkill_state state) +{ + struct iwl3945_priv *priv = data; + int err = 0; + + if (!priv->rfkill) + return 0; + + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return 0; + + IWL_DEBUG_RF_KILL("we recieved soft RFKILL set to state %d\n", state); + mutex_lock(&priv->mutex); + + switch (state) { + case RFKILL_STATE_UNBLOCKED: + if (iwl3945_is_rfkill_hw(priv)) { + err = -EBUSY; + goto out_unlock; + } + iwl3945_radio_kill_sw(priv, 0); + break; + case RFKILL_STATE_SOFT_BLOCKED: + iwl3945_radio_kill_sw(priv, 1); + break; + default: + IWL_WARNING("we recieved unexpected RFKILL state %d\n", state); + break; + } +out_unlock: + mutex_unlock(&priv->mutex); + + return err; +} + +int iwl3945_rfkill_init(struct iwl3945_priv *priv) +{ + struct device *device = wiphy_dev(priv->hw->wiphy); + int ret = 0; + + BUG_ON(device == NULL); + + IWL_DEBUG_RF_KILL("Initializing RFKILL.\n"); + priv->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN); + if (!priv->rfkill) { + IWL_ERROR("Unable to allocate rfkill device.\n"); + ret = -ENOMEM; + goto error; + } + + priv->rfkill->name = priv->cfg->name; + priv->rfkill->data = priv; + priv->rfkill->state = RFKILL_STATE_UNBLOCKED; + priv->rfkill->toggle_radio = iwl3945_rfkill_soft_rf_kill; + priv->rfkill->user_claim_unsupported = 1; + + priv->rfkill->dev.class->suspend = NULL; + priv->rfkill->dev.class->resume = NULL; + + ret = rfkill_register(priv->rfkill); + if (ret) { + IWL_ERROR("Unable to register rfkill: %d\n", ret); + goto freed_rfkill; + } + + IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n"); + return ret; + +freed_rfkill: + if (priv->rfkill != NULL) + rfkill_free(priv->rfkill); + priv->rfkill = NULL; + +error: + IWL_DEBUG_RF_KILL("RFKILL initialization complete.\n"); + return ret; +} + +void iwl3945_rfkill_unregister(struct iwl3945_priv *priv) +{ + if (priv->rfkill) + rfkill_unregister(priv->rfkill); + + priv->rfkill = NULL; +} + +/* set rf-kill to the right state. */ +void iwl3945_rfkill_set_hw_state(struct iwl3945_priv *priv) +{ + + if (!priv->rfkill) + return; + + if (iwl3945_is_rfkill_hw(priv)) { + rfkill_force_state(priv->rfkill, RFKILL_STATE_HARD_BLOCKED); + return; + } + + if (!iwl3945_is_rfkill_sw(priv)) + rfkill_force_state(priv->rfkill, RFKILL_STATE_UNBLOCKED); + else + rfkill_force_state(priv->rfkill, RFKILL_STATE_SOFT_BLOCKED); +} +#endif + /***************************************************************************** * * driver and module entry point diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 4cba474..e69de29 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -1,8040 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * James P. Ketrenos <ipw2100-admin@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/version.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/wireless.h> -#include <linux/firmware.h> -#include <linux/etherdevice.h> -#include <linux/if_arp.h> - -#include <net/mac80211.h> - -#include <asm/div64.h> - -#include "iwl-eeprom.h" -#include "iwl-4965.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-helpers.h" -#include "iwl-sta.h" - -static int iwl4965_tx_queue_update_write_ptr(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq); - -/****************************************************************************** - * - * module boiler plate - * - ******************************************************************************/ - -/* - * module name, copyright, version, etc. - * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk - */ - -#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link 4965AGN driver for Linux" - -#ifdef CONFIG_IWLWIFI_DEBUG -#define VD "d" -#else -#define VD -#endif - -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT -#define VS "s" -#else -#define VS -#endif - -#define DRV_VERSION IWLWIFI_VERSION VD VS - - -MODULE_DESCRIPTION(DRV_DESCRIPTION); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT); -MODULE_LICENSE("GPL"); - -__le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr) -{ - u16 fc = le16_to_cpu(hdr->frame_control); - int hdr_len = ieee80211_get_hdrlen(fc); - - if ((fc & 0x00cc) == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA)) - return (__le16 *) ((u8 *) hdr + hdr_len - QOS_CONTROL_LEN); - return NULL; -} - -static const struct ieee80211_supported_band *iwl4965_get_hw_mode( - struct iwl_priv *priv, enum ieee80211_band band) -{ - return priv->hw->wiphy->bands[band]; -} - -static int iwl4965_is_empty_essid(const char *essid, int essid_len) -{ - /* Single white space is for Linksys APs */ - if (essid_len == 1 && essid[0] == ' ') - return 1; - - /* Otherwise, if the entire essid is 0, we assume it is hidden */ - while (essid_len) { - essid_len--; - if (essid[essid_len] != '\0') - return 0; - } - - return 1; -} - -static const char *iwl4965_escape_essid(const char *essid, u8 essid_len) -{ - static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; - const char *s = essid; - char *d = escaped; - - if (iwl4965_is_empty_essid(essid, essid_len)) { - memcpy(escaped, "<hidden>", sizeof("<hidden>")); - return escaped; - } - - essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE); - while (essid_len--) { - if (*s == '\0') { - *d++ = '\\'; - *d++ = '0'; - s++; - } else - *d++ = *s++; - } - *d = '\0'; - return escaped; -} - -/*************** DMA-QUEUE-GENERAL-FUNCTIONS ***** - * DMA services - * - * Theory of operation - * - * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer - * of buffer descriptors, each of which points to one or more data buffers for - * the device to read from or fill. Driver and device exchange status of each - * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty - * entries in each circular buffer, to protect against confusing empty and full - * queue states. - * - * The device reads or writes the data in the queues via the device's several - * DMA/FIFO channels. Each queue is mapped to a single DMA channel. - * - * For Tx queue, there are low mark and high mark limits. If, after queuing - * the packet for Tx, free space become < low mark, Tx queue stopped. When - * reclaiming packets (on 'tx done IRQ), if free space become > high mark, - * Tx queue resumed. - * - * The 4965 operates with up to 17 queues: One receive queue, one transmit - * queue (#4) for sending commands to the device firmware, and 15 other - * Tx queues that may be mapped to prioritized Tx DMA/FIFO channels. - * - * See more detailed info in iwl-4965-hw.h. - ***************************************************/ - -int iwl4965_queue_space(const struct iwl4965_queue *q) -{ - int s = q->read_ptr - q->write_ptr; - - if (q->read_ptr > q->write_ptr) - s -= q->n_bd; - - if (s <= 0) - s += q->n_window; - /* keep some reserve to not confuse empty and full situations */ - s -= 2; - if (s < 0) - s = 0; - return s; -} - - -static inline int x2_queue_used(const struct iwl4965_queue *q, int i) -{ - return q->write_ptr > q->read_ptr ? - (i >= q->read_ptr && i < q->write_ptr) : - !(i < q->read_ptr && i >= q->write_ptr); -} - -static inline u8 get_cmd_index(struct iwl4965_queue *q, u32 index, int is_huge) -{ - /* This is for scan command, the big buffer at end of command array */ - if (is_huge) - return q->n_window; /* must be power of 2 */ - - /* Otherwise, use normal size buffers */ - return index & (q->n_window - 1); -} - -/** - * iwl4965_queue_init - Initialize queue's high/low-water and read/write indexes - */ -static int iwl4965_queue_init(struct iwl_priv *priv, struct iwl4965_queue *q, - int count, int slots_num, u32 id) -{ - q->n_bd = count; - q->n_window = slots_num; - q->id = id; - - /* count must be power-of-two size, otherwise iwl_queue_inc_wrap - * and iwl_queue_dec_wrap are broken. */ - BUG_ON(!is_power_of_2(count)); - - /* slots_num must be power-of-two size, otherwise - * get_cmd_index is broken. */ - BUG_ON(!is_power_of_2(slots_num)); - - q->low_mark = q->n_window / 4; - if (q->low_mark < 4) - q->low_mark = 4; - - q->high_mark = q->n_window / 8; - if (q->high_mark < 2) - q->high_mark = 2; - - q->write_ptr = q->read_ptr = 0; - - return 0; -} - -/** - * iwl4965_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue - */ -static int iwl4965_tx_queue_alloc(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq, u32 id) -{ - struct pci_dev *dev = priv->pci_dev; - - /* Driver private data, only for Tx (not command) queues, - * not shared with device. */ - if (id != IWL_CMD_QUEUE_NUM) { - txq->txb = kmalloc(sizeof(txq->txb[0]) * - TFD_QUEUE_SIZE_MAX, GFP_KERNEL); - if (!txq->txb) { - IWL_ERROR("kmalloc for auxiliary BD " - "structures failed\n"); - goto error; - } - } else - txq->txb = NULL; - - /* Circular buffer of transmit frame descriptors (TFDs), - * shared with device */ - txq->bd = pci_alloc_consistent(dev, - sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX, - &txq->q.dma_addr); - - if (!txq->bd) { - IWL_ERROR("pci_alloc_consistent(%zd) failed\n", - sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX); - goto error; - } - txq->q.id = id; - - return 0; - - error: - if (txq->txb) { - kfree(txq->txb); - txq->txb = NULL; - } - - return -ENOMEM; -} - -/** - * iwl4965_tx_queue_init - Allocate and initialize one tx/cmd queue - */ -int iwl4965_tx_queue_init(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq, int slots_num, u32 txq_id) -{ - struct pci_dev *dev = priv->pci_dev; - int len; - int rc = 0; - - /* - * Alloc buffer array for commands (Tx or other types of commands). - * For the command queue (#4), allocate command space + one big - * command for scan, since scan command is very huge; the system will - * not have two scans at the same time, so only one is needed. - * For normal Tx queues (all other queues), no super-size command - * space is needed. - */ - len = sizeof(struct iwl_cmd) * slots_num; - if (txq_id == IWL_CMD_QUEUE_NUM) - len += IWL_MAX_SCAN_SIZE; - txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd); - if (!txq->cmd) - return -ENOMEM; - - /* Alloc driver data array and TFD circular buffer */ - rc = iwl4965_tx_queue_alloc(priv, txq, txq_id); - if (rc) { - pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd); - - return -ENOMEM; - } - txq->need_update = 0; - - /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise - * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */ - BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1)); - - /* Initialize queue's high/low-water marks, and head/tail indexes */ - iwl4965_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id); - - /* Tell device where to find queue */ - iwl4965_hw_tx_queue_init(priv, txq); - - return 0; -} - -/** - * iwl4965_tx_queue_free - Deallocate DMA queue. - * @txq: Transmit queue to deallocate. - * - * Empty queue by removing and destroying all BD's. - * Free all buffers. - * 0-fill, but do not free "txq" descriptor structure. - */ -void iwl4965_tx_queue_free(struct iwl_priv *priv, struct iwl4965_tx_queue *txq) -{ - struct iwl4965_queue *q = &txq->q; - struct pci_dev *dev = priv->pci_dev; - int len; - - if (q->n_bd == 0) - return; - - /* first, empty all BD's */ - for (; q->write_ptr != q->read_ptr; - q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) - iwl4965_hw_txq_free_tfd(priv, txq); - - len = sizeof(struct iwl_cmd) * q->n_window; - if (q->id == IWL_CMD_QUEUE_NUM) - len += IWL_MAX_SCAN_SIZE; - - /* De-alloc array of command/tx buffers */ - pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd); - - /* De-alloc circular buffer of TFDs */ - if (txq->q.n_bd) - pci_free_consistent(dev, sizeof(struct iwl4965_tfd_frame) * - txq->q.n_bd, txq->bd, txq->q.dma_addr); - - /* De-alloc array of per-TFD driver data */ - if (txq->txb) { - kfree(txq->txb); - txq->txb = NULL; - } - - /* 0-fill queue descriptor structure */ - memset(txq, 0, sizeof(*txq)); -} - -const u8 iwl4965_broadcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; - -/*************** STATION TABLE MANAGEMENT **** - * mac80211 should be examined to determine if sta_info is duplicating - * the functionality provided here - */ - -/**************************************************************/ - -#if 0 /* temporary disable till we add real remove station */ -/** - * iwl4965_remove_station - Remove driver's knowledge of station. - * - * NOTE: This does not remove station from device's station table. - */ -static u8 iwl4965_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap) -{ - int index = IWL_INVALID_STATION; - int i; - unsigned long flags; - - spin_lock_irqsave(&priv->sta_lock, flags); - - if (is_ap) - index = IWL_AP_ID; - else if (is_broadcast_ether_addr(addr)) - index = priv->hw_params.bcast_sta_id; - else - for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++) - if (priv->stations[i].used && - !compare_ether_addr(priv->stations[i].sta.sta.addr, - addr)) { - index = i; - break; - } - - if (unlikely(index == IWL_INVALID_STATION)) - goto out; - - if (priv->stations[index].used) { - priv->stations[index].used = 0; - priv->num_stations--; - } - - BUG_ON(priv->num_stations < 0); - -out: - spin_unlock_irqrestore(&priv->sta_lock, flags); - return 0; -} -#endif - -/** - * iwl4965_add_station_flags - Add station to tables in driver and device - */ -u8 iwl4965_add_station_flags(struct iwl_priv *priv, const u8 *addr, - int is_ap, u8 flags, void *ht_data) -{ - int i; - int index = IWL_INVALID_STATION; - struct iwl4965_station_entry *station; - unsigned long flags_spin; - DECLARE_MAC_BUF(mac); - - spin_lock_irqsave(&priv->sta_lock, flags_spin); - if (is_ap) - index = IWL_AP_ID; - else if (is_broadcast_ether_addr(addr)) - index = priv->hw_params.bcast_sta_id; - else - for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++) { - if (!compare_ether_addr(priv->stations[i].sta.sta.addr, - addr)) { - index = i; - break; - } - - if (!priv->stations[i].used && - index == IWL_INVALID_STATION) - index = i; - } - - - /* These two conditions have the same outcome, but keep them separate - since they have different meanings */ - if (unlikely(index == IWL_INVALID_STATION)) { - spin_unlock_irqrestore(&priv->sta_lock, flags_spin); - return index; - } - - if (priv->stations[index].used && - !compare_ether_addr(priv->stations[index].sta.sta.addr, addr)) { - spin_unlock_irqrestore(&priv->sta_lock, flags_spin); - return index; - } - - - IWL_DEBUG_ASSOC("Add STA ID %d: %s\n", index, print_mac(mac, addr)); - station = &priv->stations[index]; - station->used = 1; - priv->num_stations++; - - /* Set up the REPLY_ADD_STA command to send to device */ - memset(&station->sta, 0, sizeof(struct iwl4965_addsta_cmd)); - memcpy(station->sta.sta.addr, addr, ETH_ALEN); - station->sta.mode = 0; - station->sta.sta.sta_id = index; - station->sta.station_flags = 0; - -#ifdef CONFIG_IWL4965_HT - /* BCAST station and IBSS stations do not work in HT mode */ - if (index != priv->hw_params.bcast_sta_id && - priv->iw_mode != IEEE80211_IF_TYPE_IBSS) - iwl4965_set_ht_add_station(priv, index, - (struct ieee80211_ht_info *) ht_data); -#endif /*CONFIG_IWL4965_HT*/ - - spin_unlock_irqrestore(&priv->sta_lock, flags_spin); - - /* Add station to device's station table */ - iwl4965_send_add_station(priv, &station->sta, flags); - return index; - -} - - - -/*************** HOST COMMAND QUEUE FUNCTIONS *****/ - -/** - * iwl4965_enqueue_hcmd - enqueue a uCode command - * @priv: device private data point - * @cmd: a point to the ucode command structure - * - * The function returns < 0 values to indicate the operation is - * failed. On success, it turns the index (> 0) of command in the - * command queue. - */ -int iwl4965_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) -{ - struct iwl4965_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM]; - struct iwl4965_queue *q = &txq->q; - struct iwl4965_tfd_frame *tfd; - u32 *control_flags; - struct iwl_cmd *out_cmd; - u32 idx; - u16 fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr)); - dma_addr_t phys_addr; - int ret; - unsigned long flags; - - /* If any of the command structures end up being larger than - * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then - * we will need to increase the size of the TFD entries */ - BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) && - !(cmd->meta.flags & CMD_SIZE_HUGE)); - - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_INFO("Not sending command - RF KILL"); - return -EIO; - } - - if (iwl4965_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) { - IWL_ERROR("No space for Tx\n"); - return -ENOSPC; - } - - spin_lock_irqsave(&priv->hcmd_lock, flags); - - tfd = &txq->bd[q->write_ptr]; - memset(tfd, 0, sizeof(*tfd)); - - control_flags = (u32 *) tfd; - - idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE); - out_cmd = &txq->cmd[idx]; - - out_cmd->hdr.cmd = cmd->id; - memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta)); - memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len); - - /* At this point, the out_cmd now has all of the incoming cmd - * information */ - - out_cmd->hdr.flags = 0; - out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) | - INDEX_TO_SEQ(q->write_ptr)); - if (out_cmd->meta.flags & CMD_SIZE_HUGE) - out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME); - - phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx + - offsetof(struct iwl_cmd, hdr); - iwl4965_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size); - - IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, " - "%d bytes at %d[%d]:%d\n", - get_cmd_string(out_cmd->hdr.cmd), - out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence), - fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM); - - txq->need_update = 1; - - /* Set up entry in queue's byte count circular buffer */ - priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0); - - /* Increment and update queue's write index */ - q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); - ret = iwl4965_tx_queue_update_write_ptr(priv, txq); - - spin_unlock_irqrestore(&priv->hcmd_lock, flags); - return ret ? ret : idx; -} - -static void iwl4965_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt) -{ - struct iwl4965_rxon_cmd *rxon = &priv->staging_rxon; - - if (hw_decrypt) - rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; - else - rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; - -} - -/** - * iwl4965_rxon_add_station - add station into station table. - * - * there is only one AP station with id= IWL_AP_ID - * NOTE: mutex must be held before calling this fnction - */ -static int iwl4965_rxon_add_station(struct iwl_priv *priv, - const u8 *addr, int is_ap) -{ - u8 sta_id; - - /* Add station to device's station table */ -#ifdef CONFIG_IWL4965_HT - struct ieee80211_conf *conf = &priv->hw->conf; - struct ieee80211_ht_info *cur_ht_config = &conf->ht_conf; - - if ((is_ap) && - (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && - (priv->iw_mode == IEEE80211_IF_TYPE_STA)) - sta_id = iwl4965_add_station_flags(priv, addr, is_ap, - 0, cur_ht_config); - else -#endif /* CONFIG_IWL4965_HT */ - sta_id = iwl4965_add_station_flags(priv, addr, is_ap, - 0, NULL); - - /* Set up default rate scaling table in device's station table */ - iwl4965_add_station(priv, addr, is_ap); - - return sta_id; -} - -/** - * iwl4965_check_rxon_cmd - validate RXON structure is valid - * - * NOTE: This is really only useful during development and can eventually - * be #ifdef'd out once the driver is stable and folks aren't actively - * making changes - */ -static int iwl4965_check_rxon_cmd(struct iwl4965_rxon_cmd *rxon) -{ - int error = 0; - int counter = 1; - - if (rxon->flags & RXON_FLG_BAND_24G_MSK) { - error |= le32_to_cpu(rxon->flags & - (RXON_FLG_TGJ_NARROW_BAND_MSK | - RXON_FLG_RADAR_DETECT_MSK)); - if (error) - IWL_WARNING("check 24G fields %d | %d\n", - counter++, error); - } else { - error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ? - 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK); - if (error) - IWL_WARNING("check 52 fields %d | %d\n", - counter++, error); - error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK); - if (error) - IWL_WARNING("check 52 CCK %d | %d\n", - counter++, error); - } - error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1; - if (error) - IWL_WARNING("check mac addr %d | %d\n", counter++, error); - - /* make sure basic rates 6Mbps and 1Mbps are supported */ - error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) && - ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0)); - if (error) - IWL_WARNING("check basic rate %d | %d\n", counter++, error); - - error |= (le16_to_cpu(rxon->assoc_id) > 2007); - if (error) - IWL_WARNING("check assoc id %d | %d\n", counter++, error); - - error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) - == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)); - if (error) - IWL_WARNING("check CCK and short slot %d | %d\n", - counter++, error); - - error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) - == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)); - if (error) - IWL_WARNING("check CCK & auto detect %d | %d\n", - counter++, error); - - error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | - RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK); - if (error) - IWL_WARNING("check TGG and auto detect %d | %d\n", - counter++, error); - - if (error) - IWL_WARNING("Tuning to channel %d\n", - le16_to_cpu(rxon->channel)); - - if (error) { - IWL_ERROR("Not a valid iwl4965_rxon_assoc_cmd field values\n"); - return -1; - } - return 0; -} - -/** - * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed - * @priv: staging_rxon is compared to active_rxon - * - * If the RXON structure is changing enough to require a new tune, - * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that - * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. - */ -static int iwl4965_full_rxon_required(struct iwl_priv *priv) -{ - - /* These items are only settable from the full RXON command */ - if (!(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) || - compare_ether_addr(priv->staging_rxon.bssid_addr, - priv->active_rxon.bssid_addr) || - compare_ether_addr(priv->staging_rxon.node_addr, - priv->active_rxon.node_addr) || - compare_ether_addr(priv->staging_rxon.wlap_bssid_addr, - priv->active_rxon.wlap_bssid_addr) || - (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) || - (priv->staging_rxon.channel != priv->active_rxon.channel) || - (priv->staging_rxon.air_propagation != - priv->active_rxon.air_propagation) || - (priv->staging_rxon.ofdm_ht_single_stream_basic_rates != - priv->active_rxon.ofdm_ht_single_stream_basic_rates) || - (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != - priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || - (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) || - (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) - return 1; - - /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can - * be updated with the RXON_ASSOC command -- however only some - * flag transitions are allowed using RXON_ASSOC */ - - /* Check if we are not switching bands */ - if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) != - (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)) - return 1; - - /* Check if we are switching association toggle */ - if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) != - (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) - return 1; - - return 0; -} - -/** - * iwl4965_commit_rxon - commit staging_rxon to hardware - * - * The RXON command in staging_rxon is committed to the hardware and - * the active_rxon structure is updated with the new data. This - * function correctly transitions out of the RXON_ASSOC_MSK state if - * a HW tune is required based on the RXON structure changes. - */ -static int iwl4965_commit_rxon(struct iwl_priv *priv) -{ - /* cast away the const for active_rxon in this function */ - struct iwl4965_rxon_cmd *active_rxon = (void *)&priv->active_rxon; - DECLARE_MAC_BUF(mac); - int rc = 0; - - if (!iwl_is_alive(priv)) - return -1; - - /* always get timestamp with Rx frame */ - priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK; - - rc = iwl4965_check_rxon_cmd(&priv->staging_rxon); - if (rc) { - IWL_ERROR("Invalid RXON configuration. Not committing.\n"); - return -EINVAL; - } - - /* If we don't need to send a full RXON, we can use - * iwl4965_rxon_assoc_cmd which is used to reconfigure filter - * and other flags for the current radio configuration. */ - if (!iwl4965_full_rxon_required(priv)) { - rc = iwl_send_rxon_assoc(priv); - if (rc) { - IWL_ERROR("Error setting RXON_ASSOC " - "configuration (%d).\n", rc); - return rc; - } - - memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); - - return 0; - } - - /* station table will be cleared */ - priv->assoc_station_added = 0; - -#ifdef CONFIG_IWL4965_SENSITIVITY - priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT; - if (!priv->error_recovering) - priv->start_calib = 0; - - iwl4965_init_sensitivity(priv, CMD_ASYNC, 1); -#endif /* CONFIG_IWL4965_SENSITIVITY */ - - /* If we are currently associated and the new config requires - * an RXON_ASSOC and the new config wants the associated mask enabled, - * we must clear the associated from the active configuration - * before we apply the new config */ - if (iwl_is_associated(priv) && - (priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) { - IWL_DEBUG_INFO("Toggling associated bit on current RXON\n"); - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - - rc = iwl_send_cmd_pdu(priv, REPLY_RXON, - sizeof(struct iwl4965_rxon_cmd), - &priv->active_rxon); - - /* If the mask clearing failed then we set - * active_rxon back to what it was previously */ - if (rc) { - active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; - IWL_ERROR("Error clearing ASSOC_MSK on current " - "configuration (%d).\n", rc); - return rc; - } - } - - IWL_DEBUG_INFO("Sending RXON\n" - "* with%s RXON_FILTER_ASSOC_MSK\n" - "* channel = %d\n" - "* bssid = %s\n", - ((priv->staging_rxon.filter_flags & - RXON_FILTER_ASSOC_MSK) ? "" : "out"), - le16_to_cpu(priv->staging_rxon.channel), - print_mac(mac, priv->staging_rxon.bssid_addr)); - - iwl4965_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto); - /* Apply the new configuration */ - rc = iwl_send_cmd_pdu(priv, REPLY_RXON, - sizeof(struct iwl4965_rxon_cmd), &priv->staging_rxon); - if (rc) { - IWL_ERROR("Error setting new configuration (%d).\n", rc); - return rc; - } - - iwlcore_clear_stations_table(priv); - -#ifdef CONFIG_IWL4965_SENSITIVITY - if (!priv->error_recovering) - priv->start_calib = 0; - - priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT; - iwl4965_init_sensitivity(priv, CMD_ASYNC, 1); -#endif /* CONFIG_IWL4965_SENSITIVITY */ - - memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); - - /* If we issue a new RXON command which required a tune then we must - * send a new TXPOWER command or we won't be able to Tx any frames */ - rc = iwl4965_hw_reg_send_txpower(priv); - if (rc) { - IWL_ERROR("Error setting Tx power (%d).\n", rc); - return rc; - } - - /* Add the broadcast address so we can send broadcast frames */ - if (iwl4965_rxon_add_station(priv, iwl4965_broadcast_addr, 0) == - IWL_INVALID_STATION) { - IWL_ERROR("Error adding BROADCAST address for transmit.\n"); - return -EIO; - } - - /* If we have set the ASSOC_MSK and we are in BSS mode then - * add the IWL_AP_ID to the station rate table */ - if (iwl_is_associated(priv) && - (priv->iw_mode == IEEE80211_IF_TYPE_STA)) { - if (iwl4965_rxon_add_station(priv, priv->active_rxon.bssid_addr, 1) - == IWL_INVALID_STATION) { - IWL_ERROR("Error adding AP address for transmit.\n"); - return -EIO; - } - priv->assoc_station_added = 1; - if (priv->default_wep_key && - iwl_send_static_wepkey_cmd(priv, 0)) - IWL_ERROR("Could not send WEP static key.\n"); - } - - return 0; -} - -static int iwl4965_send_bt_config(struct iwl_priv *priv) -{ - struct iwl4965_bt_cmd bt_cmd = { - .flags = 3, - .lead_time = 0xAA, - .max_kill = 1, - .kill_ack_mask = 0, - .kill_cts_mask = 0, - }; - - return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, - sizeof(struct iwl4965_bt_cmd), &bt_cmd); -} - -static int iwl4965_send_scan_abort(struct iwl_priv *priv) -{ - int rc = 0; - struct iwl4965_rx_packet *res; - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_ABORT_CMD, - .meta.flags = CMD_WANT_SKB, - }; - - /* If there isn't a scan actively going on in the hardware - * then we are in between scan bands and not actually - * actively scanning, so don't send the abort command */ - if (!test_bit(STATUS_SCAN_HW, &priv->status)) { - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - return 0; - } - - rc = iwl_send_cmd_sync(priv, &cmd); - if (rc) { - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - return rc; - } - - res = (struct iwl4965_rx_packet *)cmd.meta.u.skb->data; - if (res->u.status != CAN_ABORT_STATUS) { - /* The scan abort will return 1 for success or - * 2 for "failure". A failure condition can be - * due to simply not being in an active scan which - * can occur if we send the scan abort before we - * the microcode has notified us that a scan is - * completed. */ - IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status); - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - clear_bit(STATUS_SCAN_HW, &priv->status); - } - - dev_kfree_skb_any(cmd.meta.u.skb); - - return rc; -} - -static int iwl4965_card_state_sync_callback(struct iwl_priv *priv, - struct iwl_cmd *cmd, - struct sk_buff *skb) -{ - return 1; -} - -/* - * CARD_STATE_CMD - * - * Use: Sets the device's internal card state to enable, disable, or halt - * - * When in the 'enable' state the card operates as normal. - * When in the 'disable' state, the card enters into a low power mode. - * When in the 'halt' state, the card is shut down and must be fully - * restarted to come back on. - */ -static int iwl4965_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_CARD_STATE_CMD, - .len = sizeof(u32), - .data = &flags, - .meta.flags = meta_flag, - }; - - if (meta_flag & CMD_ASYNC) - cmd.meta.u.callback = iwl4965_card_state_sync_callback; - - return iwl_send_cmd(priv, &cmd); -} - -static int iwl4965_add_sta_sync_callback(struct iwl_priv *priv, - struct iwl_cmd *cmd, struct sk_buff *skb) -{ - struct iwl4965_rx_packet *res = NULL; - - if (!skb) { - IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n"); - return 1; - } - - res = (struct iwl4965_rx_packet *)skb->data; - if (res->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n", - res->hdr.flags); - return 1; - } - - switch (res->u.add_sta.status) { - case ADD_STA_SUCCESS_MSK: - break; - default: - break; - } - - /* We didn't cache the SKB; let the caller free it */ - return 1; -} - -int iwl4965_send_add_station(struct iwl_priv *priv, - struct iwl4965_addsta_cmd *sta, u8 flags) -{ - struct iwl4965_rx_packet *res = NULL; - int rc = 0; - struct iwl_host_cmd cmd = { - .id = REPLY_ADD_STA, - .len = sizeof(struct iwl4965_addsta_cmd), - .meta.flags = flags, - .data = sta, - }; - - if (flags & CMD_ASYNC) - cmd.meta.u.callback = iwl4965_add_sta_sync_callback; - else - cmd.meta.flags |= CMD_WANT_SKB; - - rc = iwl_send_cmd(priv, &cmd); - - if (rc || (flags & CMD_ASYNC)) - return rc; - - res = (struct iwl4965_rx_packet *)cmd.meta.u.skb->data; - if (res->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n", - res->hdr.flags); - rc = -EIO; - } - - if (rc == 0) { - switch (res->u.add_sta.status) { - case ADD_STA_SUCCESS_MSK: - IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n"); - break; - default: - rc = -EIO; - IWL_WARNING("REPLY_ADD_STA failed\n"); - break; - } - } - - priv->alloc_rxb_skb--; - dev_kfree_skb_any(cmd.meta.u.skb); - - return rc; -} - -static void iwl4965_clear_free_frames(struct iwl_priv *priv) -{ - struct list_head *element; - - IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n", - priv->frames_count); - - while (!list_empty(&priv->free_frames)) { - element = priv->free_frames.next; - list_del(element); - kfree(list_entry(element, struct iwl4965_frame, list)); - priv->frames_count--; - } - - if (priv->frames_count) { - IWL_WARNING("%d frames still in use. Did we lose one?\n", - priv->frames_count); - priv->frames_count = 0; - } -} - -static struct iwl4965_frame *iwl4965_get_free_frame(struct iwl_priv *priv) -{ - struct iwl4965_frame *frame; - struct list_head *element; - if (list_empty(&priv->free_frames)) { - frame = kzalloc(sizeof(*frame), GFP_KERNEL); - if (!frame) { - IWL_ERROR("Could not allocate frame!\n"); - return NULL; - } - - priv->frames_count++; - return frame; - } - - element = priv->free_frames.next; - list_del(element); - return list_entry(element, struct iwl4965_frame, list); -} - -static void iwl4965_free_frame(struct iwl_priv *priv, struct iwl4965_frame *frame) -{ - memset(frame, 0, sizeof(*frame)); - list_add(&frame->list, &priv->free_frames); -} - -unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - const u8 *dest, int left) -{ - - if (!iwl_is_associated(priv) || !priv->ibss_beacon || - ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) && - (priv->iw_mode != IEEE80211_IF_TYPE_AP))) - return 0; - - if (priv->ibss_beacon->len > left) - return 0; - - memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len); - - return priv->ibss_beacon->len; -} - -static u8 iwl4965_rate_get_lowest_plcp(int rate_mask) -{ - u8 i; - - for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; - i = iwl4965_rates[i].next_ieee) { - if (rate_mask & (1 << i)) - return iwl4965_rates[i].plcp; - } - - return IWL_RATE_INVALID; -} - -static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) -{ - struct iwl4965_frame *frame; - unsigned int frame_size; - int rc; - u8 rate; - - frame = iwl4965_get_free_frame(priv); - - if (!frame) { - IWL_ERROR("Could not obtain free frame buffer for beacon " - "command.\n"); - return -ENOMEM; - } - - if (!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)) { - rate = iwl4965_rate_get_lowest_plcp(priv->active_rate_basic & - 0xFF0); - if (rate == IWL_INVALID_RATE) - rate = IWL_RATE_6M_PLCP; - } else { - rate = iwl4965_rate_get_lowest_plcp(priv->active_rate_basic & 0xF); - if (rate == IWL_INVALID_RATE) - rate = IWL_RATE_1M_PLCP; - } - - frame_size = iwl4965_hw_get_beacon_cmd(priv, frame, rate); - - rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, - &frame->u.cmd[0]); - - iwl4965_free_frame(priv, frame); - - return rc; -} - -/****************************************************************************** - * - * Misc. internal state and helper functions - * - ******************************************************************************/ - -static void iwl4965_unset_hw_params(struct iwl_priv *priv) -{ - if (priv->shared_virt) - pci_free_consistent(priv->pci_dev, - sizeof(struct iwl4965_shared), - priv->shared_virt, - priv->shared_phys); -} - -/** - * iwl4965_supported_rate_to_ie - fill in the supported rate in IE field - * - * return : set the bit for each supported rate insert in ie - */ -static u16 iwl4965_supported_rate_to_ie(u8 *ie, u16 supported_rate, - u16 basic_rate, int *left) -{ - u16 ret_rates = 0, bit; - int i; - u8 *cnt = ie; - u8 *rates = ie + 1; - - for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) { - if (bit & supported_rate) { - ret_rates |= bit; - rates[*cnt] = iwl4965_rates[i].ieee | - ((bit & basic_rate) ? 0x80 : 0x00); - (*cnt)++; - (*left)--; - if ((*left <= 0) || - (*cnt >= IWL_SUPPORTED_RATES_IE_LEN)) - break; - } - } - - return ret_rates; -} - -/** - * iwl4965_fill_probe_req - fill in all required fields and IE for probe request - */ -static u16 iwl4965_fill_probe_req(struct iwl_priv *priv, - enum ieee80211_band band, - struct ieee80211_mgmt *frame, - int left, int is_direct) -{ - int len = 0; - u8 *pos = NULL; - u16 active_rates, ret_rates, cck_rates, active_rate_basic; -#ifdef CONFIG_IWL4965_HT - const struct ieee80211_supported_band *sband = - iwl4965_get_hw_mode(priv, band); -#endif /* CONFIG_IWL4965_HT */ - - /* Make sure there is enough space for the probe request, - * two mandatory IEs and the data */ - left -= 24; - if (left < 0) - return 0; - len += 24; - - frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); - memcpy(frame->da, iwl4965_broadcast_addr, ETH_ALEN); - memcpy(frame->sa, priv->mac_addr, ETH_ALEN); - memcpy(frame->bssid, iwl4965_broadcast_addr, ETH_ALEN); - frame->seq_ctrl = 0; - - /* fill in our indirect SSID IE */ - /* ...next IE... */ - - left -= 2; - if (left < 0) - return 0; - len += 2; - pos = &(frame->u.probe_req.variable[0]); - *pos++ = WLAN_EID_SSID; - *pos++ = 0; - - /* fill in our direct SSID IE... */ - if (is_direct) { - /* ...next IE... */ - left -= 2 + priv->essid_len; - if (left < 0) - return 0; - /* ... fill it in... */ - *pos++ = WLAN_EID_SSID; - *pos++ = priv->essid_len; - memcpy(pos, priv->essid, priv->essid_len); - pos += priv->essid_len; - len += 2 + priv->essid_len; - } - - /* fill in supported rate */ - /* ...next IE... */ - left -= 2; - if (left < 0) - return 0; - - /* ... fill it in... */ - *pos++ = WLAN_EID_SUPP_RATES; - *pos = 0; - - /* exclude 60M rate */ - active_rates = priv->rates_mask; - active_rates &= ~IWL_RATE_60M_MASK; - - active_rate_basic = active_rates & IWL_BASIC_RATES_MASK; - - cck_rates = IWL_CCK_RATES_MASK & active_rates; - ret_rates = iwl4965_supported_rate_to_ie(pos, cck_rates, - active_rate_basic, &left); - active_rates &= ~ret_rates; - - ret_rates = iwl4965_supported_rate_to_ie(pos, active_rates, - active_rate_basic, &left); - active_rates &= ~ret_rates; - - len += 2 + *pos; - pos += (*pos) + 1; - if (active_rates == 0) - goto fill_end; - - /* fill in supported extended rate */ - /* ...next IE... */ - left -= 2; - if (left < 0) - return 0; - /* ... fill it in... */ - *pos++ = WLAN_EID_EXT_SUPP_RATES; - *pos = 0; - iwl4965_supported_rate_to_ie(pos, active_rates, - active_rate_basic, &left); - if (*pos > 0) - len += 2 + *pos; - -#ifdef CONFIG_IWL4965_HT - if (sband && sband->ht_info.ht_supported) { - struct ieee80211_ht_cap *ht_cap; - pos += (*pos) + 1; - *pos++ = WLAN_EID_HT_CAPABILITY; - *pos++ = sizeof(struct ieee80211_ht_cap); - ht_cap = (struct ieee80211_ht_cap *)pos; - ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap); - memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16); - ht_cap->ampdu_params_info =(sband->ht_info.ampdu_factor & - IEEE80211_HT_CAP_AMPDU_FACTOR) | - ((sband->ht_info.ampdu_density << 2) & - IEEE80211_HT_CAP_AMPDU_DENSITY); - len += 2 + sizeof(struct ieee80211_ht_cap); - } -#endif /*CONFIG_IWL4965_HT */ - - fill_end: - return (u16)len; -} - -/* - * QoS support -*/ -static int iwl4965_send_qos_params_command(struct iwl_priv *priv, - struct iwl4965_qosparam_cmd *qos) -{ - - return iwl_send_cmd_pdu(priv, REPLY_QOS_PARAM, - sizeof(struct iwl4965_qosparam_cmd), qos); -} - -static void iwl4965_activate_qos(struct iwl_priv *priv, u8 force) -{ - unsigned long flags; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (!priv->qos_data.qos_enable) - return; - - spin_lock_irqsave(&priv->lock, flags); - priv->qos_data.def_qos_parm.qos_flags = 0; - - if (priv->qos_data.qos_cap.q_AP.queue_request && - !priv->qos_data.qos_cap.q_AP.txop_request) - priv->qos_data.def_qos_parm.qos_flags |= - QOS_PARAM_FLG_TXOP_TYPE_MSK; - if (priv->qos_data.qos_active) - priv->qos_data.def_qos_parm.qos_flags |= - QOS_PARAM_FLG_UPDATE_EDCA_MSK; - -#ifdef CONFIG_IWL4965_HT - if (priv->current_ht_config.is_ht) - priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; -#endif /* CONFIG_IWL4965_HT */ - - spin_unlock_irqrestore(&priv->lock, flags); - - if (force || iwl_is_associated(priv)) { - IWL_DEBUG_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n", - priv->qos_data.qos_active, - priv->qos_data.def_qos_parm.qos_flags); - - iwl4965_send_qos_params_command(priv, - &(priv->qos_data.def_qos_parm)); - } -} - -/* - * Power management (not Tx power!) functions - */ -#define MSEC_TO_USEC 1024 - -#define NOSLP __constant_cpu_to_le16(0), 0, 0 -#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 -#define SLP_TIMEOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC) -#define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \ - __constant_cpu_to_le32(X1), \ - __constant_cpu_to_le32(X2), \ - __constant_cpu_to_le32(X3), \ - __constant_cpu_to_le32(X4)} - - -/* default power management (not Tx power) table values */ -/* for tim 0-10 */ -static struct iwl4965_power_vec_entry range_0[IWL_POWER_AC] = { - {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, - {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, - {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0}, - {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0}, - {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1}, - {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1} -}; - -/* for tim > 10 */ -static struct iwl4965_power_vec_entry range_1[IWL_POWER_AC] = { - {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, - {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), - SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, - {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), - SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, - {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), - SLP_VEC(2, 6, 9, 9, 0xFF)}, 0}, - {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, - {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), - SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} -}; - -int iwl4965_power_init_handle(struct iwl_priv *priv) -{ - int rc = 0, i; - struct iwl4965_power_mgr *pow_data; - int size = sizeof(struct iwl4965_power_vec_entry) * IWL_POWER_AC; - u16 pci_pm; - - IWL_DEBUG_POWER("Initialize power \n"); - - pow_data = &(priv->power_data); - - memset(pow_data, 0, sizeof(*pow_data)); - - pow_data->active_index = IWL_POWER_RANGE_0; - pow_data->dtim_val = 0xffff; - - memcpy(&pow_data->pwr_range_0[0], &range_0[0], size); - memcpy(&pow_data->pwr_range_1[0], &range_1[0], size); - - rc = pci_read_config_word(priv->pci_dev, PCI_LINK_CTRL, &pci_pm); - if (rc != 0) - return 0; - else { - struct iwl4965_powertable_cmd *cmd; - - IWL_DEBUG_POWER("adjust power command flags\n"); - - for (i = 0; i < IWL_POWER_AC; i++) { - cmd = &pow_data->pwr_range_0[i].cmd; - - if (pci_pm & 0x1) - cmd->flags &= ~IWL_POWER_PCI_PM_MSK; - else - cmd->flags |= IWL_POWER_PCI_PM_MSK; - } - } - return rc; -} - -static int iwl4965_update_power_cmd(struct iwl_priv *priv, - struct iwl4965_powertable_cmd *cmd, u32 mode) -{ - int rc = 0, i; - u8 skip; - u32 max_sleep = 0; - struct iwl4965_power_vec_entry *range; - u8 period = 0; - struct iwl4965_power_mgr *pow_data; - - if (mode > IWL_POWER_INDEX_5) { - IWL_DEBUG_POWER("Error invalid power mode \n"); - return -1; - } - pow_data = &(priv->power_data); - - if (pow_data->active_index == IWL_POWER_RANGE_0) - range = &pow_data->pwr_range_0[0]; - else - range = &pow_data->pwr_range_1[1]; - - memcpy(cmd, &range[mode].cmd, sizeof(struct iwl4965_powertable_cmd)); - -#ifdef IWL_MAC80211_DISABLE - if (priv->assoc_network != NULL) { - unsigned long flags; - - period = priv->assoc_network->tim.tim_period; - } -#endif /*IWL_MAC80211_DISABLE */ - skip = range[mode].no_dtim; - - if (period == 0) { - period = 1; - skip = 0; - } - - if (skip == 0) { - max_sleep = period; - cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK; - } else { - __le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]; - max_sleep = (le32_to_cpu(slp_itrvl) / period) * period; - cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; - } - - for (i = 0; i < IWL_POWER_VEC_SIZE; i++) { - if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep) - cmd->sleep_interval[i] = cpu_to_le32(max_sleep); - } - - IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags); - IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); - IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); - IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n", - le32_to_cpu(cmd->sleep_interval[0]), - le32_to_cpu(cmd->sleep_interval[1]), - le32_to_cpu(cmd->sleep_interval[2]), - le32_to_cpu(cmd->sleep_interval[3]), - le32_to_cpu(cmd->sleep_interval[4])); - - return rc; -} - -static int iwl4965_send_power_mode(struct iwl_priv *priv, u32 mode) -{ - u32 uninitialized_var(final_mode); - int rc; - struct iwl4965_powertable_cmd cmd; - - /* If on battery, set to 3, - * if plugged into AC power, set to CAM ("continuously aware mode"), - * else user level */ - switch (mode) { - case IWL_POWER_BATTERY: - final_mode = IWL_POWER_INDEX_3; - break; - case IWL_POWER_AC: - final_mode = IWL_POWER_MODE_CAM; - break; - default: - final_mode = mode; - break; - } - - cmd.keep_alive_beacons = 0; - - iwl4965_update_power_cmd(priv, &cmd, final_mode); - - rc = iwl_send_cmd_pdu(priv, POWER_TABLE_CMD, sizeof(cmd), &cmd); - - if (final_mode == IWL_POWER_MODE_CAM) - clear_bit(STATUS_POWER_PMI, &priv->status); - else - set_bit(STATUS_POWER_PMI, &priv->status); - - return rc; -} - -int iwl4965_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *header) -{ - /* Filter incoming packets to determine if they are targeted toward - * this network, discarding packets coming from ourselves */ - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */ - /* packets from our adapter are dropped (echo) */ - if (!compare_ether_addr(header->addr2, priv->mac_addr)) - return 0; - /* {broad,multi}cast packets to our IBSS go through */ - if (is_multicast_ether_addr(header->addr1)) - return !compare_ether_addr(header->addr3, priv->bssid); - /* packets to our adapter go through */ - return !compare_ether_addr(header->addr1, priv->mac_addr); - case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ - /* packets from our adapter are dropped (echo) */ - if (!compare_ether_addr(header->addr3, priv->mac_addr)) - return 0; - /* {broad,multi}cast packets to our BSS go through */ - if (is_multicast_ether_addr(header->addr1)) - return !compare_ether_addr(header->addr2, priv->bssid); - /* packets to our adapter go through */ - return !compare_ether_addr(header->addr1, priv->mac_addr); - default: - break; - } - - return 1; -} - -#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x - -static const char *iwl4965_get_tx_fail_reason(u32 status) -{ - switch (status & TX_STATUS_MSK) { - case TX_STATUS_SUCCESS: - return "SUCCESS"; - TX_STATUS_ENTRY(SHORT_LIMIT); - TX_STATUS_ENTRY(LONG_LIMIT); - TX_STATUS_ENTRY(FIFO_UNDERRUN); - TX_STATUS_ENTRY(MGMNT_ABORT); - TX_STATUS_ENTRY(NEXT_FRAG); - TX_STATUS_ENTRY(LIFE_EXPIRE); - TX_STATUS_ENTRY(DEST_PS); - TX_STATUS_ENTRY(ABORTED); - TX_STATUS_ENTRY(BT_RETRY); - TX_STATUS_ENTRY(STA_INVALID); - TX_STATUS_ENTRY(FRAG_DROPPED); - TX_STATUS_ENTRY(TID_DISABLE); - TX_STATUS_ENTRY(FRAME_FLUSHED); - TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); - TX_STATUS_ENTRY(TX_LOCKED); - TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); - } - - return "UNKNOWN"; -} - -/** - * iwl4965_scan_cancel - Cancel any currently executing HW scan - * - * NOTE: priv->mutex is not required before calling this function - */ -static int iwl4965_scan_cancel(struct iwl_priv *priv) -{ - if (!test_bit(STATUS_SCAN_HW, &priv->status)) { - clear_bit(STATUS_SCANNING, &priv->status); - return 0; - } - - if (test_bit(STATUS_SCANNING, &priv->status)) { - if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN("Queuing scan abort.\n"); - set_bit(STATUS_SCAN_ABORTING, &priv->status); - queue_work(priv->workqueue, &priv->abort_scan); - - } else - IWL_DEBUG_SCAN("Scan abort already in progress.\n"); - - return test_bit(STATUS_SCANNING, &priv->status); - } - - return 0; -} - -/** - * iwl4965_scan_cancel_timeout - Cancel any currently executing HW scan - * @ms: amount of time to wait (in milliseconds) for scan to abort - * - * NOTE: priv->mutex must be held before calling this function - */ -static int iwl4965_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) -{ - unsigned long now = jiffies; - int ret; - - ret = iwl4965_scan_cancel(priv); - if (ret && ms) { - mutex_unlock(&priv->mutex); - while (!time_after(jiffies, now + msecs_to_jiffies(ms)) && - test_bit(STATUS_SCANNING, &priv->status)) - msleep(1); - mutex_lock(&priv->mutex); - - return test_bit(STATUS_SCANNING, &priv->status); - } - - return ret; -} - -static void iwl4965_sequence_reset(struct iwl_priv *priv) -{ - /* Reset ieee stats */ - - /* We don't reset the net_device_stats (ieee->stats) on - * re-association */ - - priv->last_seq_num = -1; - priv->last_frag_num = -1; - priv->last_packet_time = 0; - - iwl4965_scan_cancel(priv); -} - -#define MAX_UCODE_BEACON_INTERVAL 4096 -#define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA) - -static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val) -{ - u16 new_val = 0; - u16 beacon_factor = 0; - - beacon_factor = - (beacon_val + MAX_UCODE_BEACON_INTERVAL) - / MAX_UCODE_BEACON_INTERVAL; - new_val = beacon_val / beacon_factor; - - return cpu_to_le16(new_val); -} - -static void iwl4965_setup_rxon_timing(struct iwl_priv *priv) -{ - u64 interval_tm_unit; - u64 tsf, result; - unsigned long flags; - struct ieee80211_conf *conf = NULL; - u16 beacon_int = 0; - - conf = ieee80211_get_hw_conf(priv->hw); - - spin_lock_irqsave(&priv->lock, flags); - priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp >> 32); - priv->rxon_timing.timestamp.dw[0] = - cpu_to_le32(priv->timestamp & 0xFFFFFFFF); - - priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL; - - tsf = priv->timestamp; - - beacon_int = priv->beacon_int; - spin_unlock_irqrestore(&priv->lock, flags); - - if (priv->iw_mode == IEEE80211_IF_TYPE_STA) { - if (beacon_int == 0) { - priv->rxon_timing.beacon_interval = cpu_to_le16(100); - priv->rxon_timing.beacon_init_val = cpu_to_le32(102400); - } else { - priv->rxon_timing.beacon_interval = - cpu_to_le16(beacon_int); - priv->rxon_timing.beacon_interval = - iwl4965_adjust_beacon_interval( - le16_to_cpu(priv->rxon_timing.beacon_interval)); - } - - priv->rxon_timing.atim_window = 0; - } else { - priv->rxon_timing.beacon_interval = - iwl4965_adjust_beacon_interval(conf->beacon_int); - /* TODO: we need to get atim_window from upper stack - * for now we set to 0 */ - priv->rxon_timing.atim_window = 0; - } - - interval_tm_unit = - (le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024); - result = do_div(tsf, interval_tm_unit); - priv->rxon_timing.beacon_init_val = - cpu_to_le32((u32) ((u64) interval_tm_unit - result)); - - IWL_DEBUG_ASSOC - ("beacon interval %d beacon timer %d beacon tim %d\n", - le16_to_cpu(priv->rxon_timing.beacon_interval), - le32_to_cpu(priv->rxon_timing.beacon_init_val), - le16_to_cpu(priv->rxon_timing.atim_window)); -} - -static int iwl4965_scan_initiate(struct iwl_priv *priv) -{ - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("APs don't scan.\n"); - return 0; - } - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_SCAN("Aborting scan due to not ready.\n"); - return -EIO; - } - - if (test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN("Scan already in progress.\n"); - return -EAGAIN; - } - - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN("Scan request while abort pending. " - "Queuing.\n"); - return -EAGAIN; - } - - IWL_DEBUG_INFO("Starting scan...\n"); - if (priv->cfg->sku & IWL_SKU_G) - priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ); - if (priv->cfg->sku & IWL_SKU_A) - priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ); - set_bit(STATUS_SCANNING, &priv->status); - priv->scan_start = jiffies; - priv->scan_pass_start = priv->scan_start; - - queue_work(priv->workqueue, &priv->request_scan); - - return 0; -} - - -static void iwl4965_set_flags_for_phymode(struct iwl_priv *priv, - enum ieee80211_band band) -{ - if (band == IEEE80211_BAND_5GHZ) { - priv->staging_rxon.flags &= - ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK - | RXON_FLG_CCK_MSK); - priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; - } else { - /* Copied from iwl4965_post_associate() */ - if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) - priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; - priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK; - priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK; - } -} - -/* - * initialize rxon structure with default values from eeprom - */ -static void iwl4965_connection_init_rx_config(struct iwl_priv *priv) -{ - const struct iwl_channel_info *ch_info; - - memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); - - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_AP: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP; - break; - - case IEEE80211_IF_TYPE_STA: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS; - priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; - break; - - case IEEE80211_IF_TYPE_IBSS: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS; - priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK; - priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK | - RXON_FILTER_ACCEPT_GRP_MSK; - break; - - case IEEE80211_IF_TYPE_MNTR: - priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER; - priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK | - RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK; - break; - default: - IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode); - break; - } - -#if 0 - /* TODO: Figure out when short_preamble would be set and cache from - * that */ - if (!hw_to_local(priv->hw)->short_preamble) - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; -#endif - - ch_info = iwl_get_channel_info(priv, priv->band, - le16_to_cpu(priv->staging_rxon.channel)); - - if (!ch_info) - ch_info = &priv->channel_info[0]; - - /* - * in some case A channels are all non IBSS - * in this case force B/G channel - */ - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && - !(is_channel_ibss(ch_info))) - ch_info = &priv->channel_info[0]; - - priv->staging_rxon.channel = cpu_to_le16(ch_info->channel); - priv->band = ch_info->band; - - iwl4965_set_flags_for_phymode(priv, priv->band); - - priv->staging_rxon.ofdm_basic_rates = - (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; - priv->staging_rxon.cck_basic_rates = - (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; - - priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | - RXON_FLG_CHANNEL_MODE_PURE_40_MSK); - memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN); - priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff; - priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff; - iwl4965_set_rxon_chain(priv); -} - -static int iwl4965_set_mode(struct iwl_priv *priv, int mode) -{ - if (mode == IEEE80211_IF_TYPE_IBSS) { - const struct iwl_channel_info *ch_info; - - ch_info = iwl_get_channel_info(priv, - priv->band, - le16_to_cpu(priv->staging_rxon.channel)); - - if (!ch_info || !is_channel_ibss(ch_info)) { - IWL_ERROR("channel %d not IBSS channel\n", - le16_to_cpu(priv->staging_rxon.channel)); - return -EINVAL; - } - } - - priv->iw_mode = mode; - - iwl4965_connection_init_rx_config(priv); - memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - - iwlcore_clear_stations_table(priv); - - /* dont commit rxon if rf-kill is on*/ - if (!iwl_is_ready_rf(priv)) - return -EAGAIN; - - cancel_delayed_work(&priv->scan_check); - if (iwl4965_scan_cancel_timeout(priv, 100)) { - IWL_WARNING("Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); - return -EAGAIN; - } - - iwl4965_commit_rxon(priv); - - return 0; -} - -static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv, - struct ieee80211_tx_control *ctl, - struct iwl_cmd *cmd, - struct sk_buff *skb_frag, - int sta_id) -{ - struct iwl4965_hw_key *keyinfo = &priv->stations[sta_id].keyinfo; - struct iwl_wep_key *wepkey; - int keyidx = 0; - - BUG_ON(ctl->key_idx > 3); - - switch (keyinfo->alg) { - case ALG_CCMP: - cmd->cmd.tx.sec_ctl = TX_CMD_SEC_CCM; - memcpy(cmd->cmd.tx.key, keyinfo->key, keyinfo->keylen); - if (ctl->flags & IEEE80211_TXCTL_AMPDU) - cmd->cmd.tx.tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; - IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n"); - break; - - case ALG_TKIP: - cmd->cmd.tx.sec_ctl = TX_CMD_SEC_TKIP; - ieee80211_get_tkip_key(keyinfo->conf, skb_frag, - IEEE80211_TKIP_P2_KEY, cmd->cmd.tx.key); - IWL_DEBUG_TX("tx_cmd with tkip hwcrypto\n"); - break; - - case ALG_WEP: - wepkey = &priv->wep_keys[ctl->key_idx]; - cmd->cmd.tx.sec_ctl = 0; - if (priv->default_wep_key) { - /* the WEP key was sent as static */ - keyidx = ctl->key_idx; - memcpy(&cmd->cmd.tx.key[3], wepkey->key, - wepkey->key_size); - if (wepkey->key_size == WEP_KEY_LEN_128) - cmd->cmd.tx.sec_ctl |= TX_CMD_SEC_KEY128; - } else { - /* the WEP key was sent as dynamic */ - keyidx = keyinfo->keyidx; - memcpy(&cmd->cmd.tx.key[3], keyinfo->key, - keyinfo->keylen); - if (keyinfo->keylen == WEP_KEY_LEN_128) - cmd->cmd.tx.sec_ctl |= TX_CMD_SEC_KEY128; - } - - cmd->cmd.tx.sec_ctl |= (TX_CMD_SEC_WEP | - (keyidx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT); - - IWL_DEBUG_TX("Configuring packet for WEP encryption " - "with key %d\n", keyidx); - break; - - default: - printk(KERN_ERR "Unknown encode alg %d\n", keyinfo->alg); - break; - } -} - -/* - * handle build REPLY_TX command notification. - */ -static void iwl4965_build_tx_cmd_basic(struct iwl_priv *priv, - struct iwl_cmd *cmd, - struct ieee80211_tx_control *ctrl, - struct ieee80211_hdr *hdr, - int is_unicast, u8 std_id) -{ - __le16 *qc; - u16 fc = le16_to_cpu(hdr->frame_control); - __le32 tx_flags = cmd->cmd.tx.tx_flags; - - cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - if (!(ctrl->flags & IEEE80211_TXCTL_NO_ACK)) { - tx_flags |= TX_CMD_FLG_ACK_MSK; - if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - if (ieee80211_is_probe_response(fc) && - !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) - tx_flags |= TX_CMD_FLG_TSF_MSK; - } else { - tx_flags &= (~TX_CMD_FLG_ACK_MSK); - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - } - - if (ieee80211_is_back_request(fc)) - tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; - - - cmd->cmd.tx.sta_id = std_id; - if (ieee80211_get_morefrag(hdr)) - tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; - - qc = ieee80211_get_qos_ctrl(hdr); - if (qc) { - cmd->cmd.tx.tid_tspec = (u8) (le16_to_cpu(*qc) & 0xf); - tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; - } else - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - - if (ctrl->flags & IEEE80211_TXCTL_USE_RTS_CTS) { - tx_flags |= TX_CMD_FLG_RTS_MSK; - tx_flags &= ~TX_CMD_FLG_CTS_MSK; - } else if (ctrl->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) { - tx_flags &= ~TX_CMD_FLG_RTS_MSK; - tx_flags |= TX_CMD_FLG_CTS_MSK; - } - - if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK)) - tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK; - - tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); - if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { - if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ || - (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ) - cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(3); - else - cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(2); - } else { - cmd->cmd.tx.timeout.pm_frame_timeout = 0; - } - - cmd->cmd.tx.driver_txop = 0; - cmd->cmd.tx.tx_flags = tx_flags; - cmd->cmd.tx.next_frame_len = 0; -} -static void iwl_update_tx_stats(struct iwl_priv *priv, u16 fc, u16 len) -{ - /* 0 - mgmt, 1 - cnt, 2 - data */ - int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2; - priv->tx_stats[idx].cnt++; - priv->tx_stats[idx].bytes += len; -} -/** - * iwl4965_get_sta_id - Find station's index within station table - * - * If new IBSS station, create new entry in station table - */ -static int iwl4965_get_sta_id(struct iwl_priv *priv, - struct ieee80211_hdr *hdr) -{ - int sta_id; - u16 fc = le16_to_cpu(hdr->frame_control); - DECLARE_MAC_BUF(mac); - - /* If this frame is broadcast or management, use broadcast station id */ - if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) || - is_multicast_ether_addr(hdr->addr1)) - return priv->hw_params.bcast_sta_id; - - switch (priv->iw_mode) { - - /* If we are a client station in a BSS network, use the special - * AP station entry (that's the only station we communicate with) */ - case IEEE80211_IF_TYPE_STA: - return IWL_AP_ID; - - /* If we are an AP, then find the station, or use BCAST */ - case IEEE80211_IF_TYPE_AP: - sta_id = iwl4965_hw_find_station(priv, hdr->addr1); - if (sta_id != IWL_INVALID_STATION) - return sta_id; - return priv->hw_params.bcast_sta_id; - - /* If this frame is going out to an IBSS network, find the station, - * or create a new station table entry */ - case IEEE80211_IF_TYPE_IBSS: - sta_id = iwl4965_hw_find_station(priv, hdr->addr1); - if (sta_id != IWL_INVALID_STATION) - return sta_id; - - /* Create new station table entry */ - sta_id = iwl4965_add_station_flags(priv, hdr->addr1, - 0, CMD_ASYNC, NULL); - - if (sta_id != IWL_INVALID_STATION) - return sta_id; - - IWL_DEBUG_DROP("Station %s not in station map. " - "Defaulting to broadcast...\n", - print_mac(mac, hdr->addr1)); - iwl_print_hex_dump(IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr)); - return priv->hw_params.bcast_sta_id; - - default: - IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode); - return priv->hw_params.bcast_sta_id; - } -} - -/* - * start REPLY_TX command process - */ -static int iwl4965_tx_skb(struct iwl_priv *priv, - struct sk_buff *skb, struct ieee80211_tx_control *ctl) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl4965_tfd_frame *tfd; - u32 *control_flags; - int txq_id = ctl->queue; - struct iwl4965_tx_queue *txq = NULL; - struct iwl4965_queue *q = NULL; - dma_addr_t phys_addr; - dma_addr_t txcmd_phys; - dma_addr_t scratch_phys; - struct iwl_cmd *out_cmd = NULL; - u16 len, idx, len_org; - u8 id, hdr_len, unicast; - u8 sta_id; - u16 seq_number = 0; - u16 fc; - __le16 *qc; - u8 wait_write_ptr = 0; - unsigned long flags; - int rc; - - spin_lock_irqsave(&priv->lock, flags); - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_DROP("Dropping - RF KILL\n"); - goto drop_unlock; - } - - if (!priv->vif) { - IWL_DEBUG_DROP("Dropping - !priv->vif\n"); - goto drop_unlock; - } - - if ((ctl->tx_rate->hw_value & 0xFF) == IWL_INVALID_RATE) { - IWL_ERROR("ERROR: No TX rate available.\n"); - goto drop_unlock; - } - - unicast = !is_multicast_ether_addr(hdr->addr1); - id = 0; - - fc = le16_to_cpu(hdr->frame_control); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (ieee80211_is_auth(fc)) - IWL_DEBUG_TX("Sending AUTH frame\n"); - else if (ieee80211_is_assoc_request(fc)) - IWL_DEBUG_TX("Sending ASSOC frame\n"); - else if (ieee80211_is_reassoc_request(fc)) - IWL_DEBUG_TX("Sending REASSOC frame\n"); -#endif - - /* drop all data frame if we are not associated */ - if (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) && - (!iwl_is_associated(priv) || - ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id) || - !priv->assoc_station_added)) { - IWL_DEBUG_DROP("Dropping - !iwl_is_associated\n"); - goto drop_unlock; - } - - spin_unlock_irqrestore(&priv->lock, flags); - - hdr_len = ieee80211_get_hdrlen(fc); - - /* Find (or create) index into station table for destination station */ - sta_id = iwl4965_get_sta_id(priv, hdr); - if (sta_id == IWL_INVALID_STATION) { - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_DROP("Dropping - INVALID STATION: %s\n", - print_mac(mac, hdr->addr1)); - goto drop; - } - - IWL_DEBUG_RATE("station Id %d\n", sta_id); - - qc = ieee80211_get_qos_ctrl(hdr); - if (qc) { - u8 tid = (u8)(le16_to_cpu(*qc) & 0xf); - seq_number = priv->stations[sta_id].tid[tid].seq_number & - IEEE80211_SCTL_SEQ; - hdr->seq_ctrl = cpu_to_le16(seq_number) | - (hdr->seq_ctrl & - __constant_cpu_to_le16(IEEE80211_SCTL_FRAG)); - seq_number += 0x10; -#ifdef CONFIG_IWL4965_HT - /* aggregation is on for this <sta,tid> */ - if (ctl->flags & IEEE80211_TXCTL_AMPDU) - txq_id = priv->stations[sta_id].tid[tid].agg.txq_id; - priv->stations[sta_id].tid[tid].tfds_in_queue++; -#endif /* CONFIG_IWL4965_HT */ - } - - /* Descriptor for chosen Tx queue */ - txq = &priv->txq[txq_id]; - q = &txq->q; - - spin_lock_irqsave(&priv->lock, flags); - - /* Set up first empty TFD within this queue's circular TFD buffer */ - tfd = &txq->bd[q->write_ptr]; - memset(tfd, 0, sizeof(*tfd)); - control_flags = (u32 *) tfd; - idx = get_cmd_index(q, q->write_ptr, 0); - - /* Set up driver data for this TFD */ - memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl4965_tx_info)); - txq->txb[q->write_ptr].skb[0] = skb; - memcpy(&(txq->txb[q->write_ptr].status.control), - ctl, sizeof(struct ieee80211_tx_control)); - - /* Set up first empty entry in queue's array of Tx/cmd buffers */ - out_cmd = &txq->cmd[idx]; - memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); - memset(&out_cmd->cmd.tx, 0, sizeof(out_cmd->cmd.tx)); - - /* - * Set up the Tx-command (not MAC!) header. - * Store the chosen Tx queue and TFD index within the sequence field; - * after Tx, uCode's Tx response will return this value so driver can - * locate the frame within the tx queue and do post-tx processing. - */ - out_cmd->hdr.cmd = REPLY_TX; - out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | - INDEX_TO_SEQ(q->write_ptr))); - - /* Copy MAC header from skb into command buffer */ - memcpy(out_cmd->cmd.tx.hdr, hdr, hdr_len); - - /* - * Use the first empty entry in this queue's command buffer array - * to contain the Tx command and MAC header concatenated together - * (payload data will be in another buffer). - * Size of this varies, due to varying MAC header length. - * If end is not dword aligned, we'll have 2 extra bytes at the end - * of the MAC header (device reads on dword boundaries). - * We'll tell device about this padding later. - */ - len = priv->hw_params.tx_cmd_len + - sizeof(struct iwl_cmd_header) + hdr_len; - - len_org = len; - len = (len + 3) & ~3; - - if (len_org != len) - len_org = 1; - else - len_org = 0; - - /* Physical address of this Tx command's header (not MAC header!), - * within command buffer array. */ - txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl_cmd) * idx + - offsetof(struct iwl_cmd, hdr); - - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - iwl4965_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len); - - if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) - iwl4965_build_tx_cmd_hwcrypto(priv, ctl, out_cmd, skb, sta_id); - - /* Set up TFD's 2nd entry to point directly to remainder of skb, - * if any (802.11 null frames have no payload). */ - len = skb->len - hdr_len; - if (len) { - phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len, - len, PCI_DMA_TODEVICE); - iwl4965_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, len); - } - - /* Tell 4965 about any 2-byte padding after MAC header */ - if (len_org) - out_cmd->cmd.tx.tx_flags |= TX_CMD_FLG_MH_PAD_MSK; - - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - out_cmd->cmd.tx.len = cpu_to_le16(len); - - /* TODO need this for burst mode later on */ - iwl4965_build_tx_cmd_basic(priv, out_cmd, ctl, hdr, unicast, sta_id); - - /* set is_hcca to 0; it probably will never be implemented */ - iwl4965_hw_build_tx_cmd_rate(priv, out_cmd, ctl, hdr, sta_id, 0); - - iwl_update_tx_stats(priv, fc, len); - - scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) + - offsetof(struct iwl4965_tx_cmd, scratch); - out_cmd->cmd.tx.dram_lsb_ptr = cpu_to_le32(scratch_phys); - out_cmd->cmd.tx.dram_msb_ptr = iwl_get_dma_hi_address(scratch_phys); - - if (!ieee80211_get_morefrag(hdr)) { - txq->need_update = 1; - if (qc) { - u8 tid = (u8)(le16_to_cpu(*qc) & 0xf); - priv->stations[sta_id].tid[tid].seq_number = seq_number; - } - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - iwl_print_hex_dump(IWL_DL_TX, out_cmd->cmd.payload, - sizeof(out_cmd->cmd.tx)); - - iwl_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr, - ieee80211_get_hdrlen(fc)); - - /* Set up entry for this TFD in Tx byte-count array */ - priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, len); - - /* Tell device the write index *just past* this latest filled TFD */ - q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); - rc = iwl4965_tx_queue_update_write_ptr(priv, txq); - spin_unlock_irqrestore(&priv->lock, flags); - - if (rc) - return rc; - - if ((iwl4965_queue_space(q) < q->high_mark) - && priv->mac80211_registered) { - if (wait_write_ptr) { - spin_lock_irqsave(&priv->lock, flags); - txq->need_update = 1; - iwl4965_tx_queue_update_write_ptr(priv, txq); - spin_unlock_irqrestore(&priv->lock, flags); - } - - ieee80211_stop_queue(priv->hw, ctl->queue); - } - - return 0; - -drop_unlock: - spin_unlock_irqrestore(&priv->lock, flags); -drop: - return -1; -} - -static void iwl4965_set_rate(struct iwl_priv *priv) -{ - const struct ieee80211_supported_band *hw = NULL; - struct ieee80211_rate *rate; - int i; - - hw = iwl4965_get_hw_mode(priv, priv->band); - if (!hw) { - IWL_ERROR("Failed to set rate: unable to get hw mode\n"); - return; - } - - priv->active_rate = 0; - priv->active_rate_basic = 0; - - for (i = 0; i < hw->n_bitrates; i++) { - rate = &(hw->bitrates[i]); - if (rate->hw_value < IWL_RATE_COUNT) - priv->active_rate |= (1 << rate->hw_value); - } - - IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n", - priv->active_rate, priv->active_rate_basic); - - /* - * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK) - * otherwise set it to the default of all CCK rates and 6, 12, 24 for - * OFDM - */ - if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK) - priv->staging_rxon.cck_basic_rates = - ((priv->active_rate_basic & - IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF; - else - priv->staging_rxon.cck_basic_rates = - (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; - - if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK) - priv->staging_rxon.ofdm_basic_rates = - ((priv->active_rate_basic & - (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >> - IWL_FIRST_OFDM_RATE) & 0xFF; - else - priv->staging_rxon.ofdm_basic_rates = - (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; -} - -void iwl4965_radio_kill_sw(struct iwl_priv *priv, int disable_radio) -{ - unsigned long flags; - - if (!!disable_radio == test_bit(STATUS_RF_KILL_SW, &priv->status)) - return; - - IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO %s\n", - disable_radio ? "OFF" : "ON"); - - if (disable_radio) { - iwl4965_scan_cancel(priv); - /* FIXME: This is a workaround for AP */ - if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { - spin_lock_irqsave(&priv->lock, flags); - iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_SW_BIT_RFKILL); - spin_unlock_irqrestore(&priv->lock, flags); - /* call the host command only if no hw rf-kill set */ - if (!test_bit(STATUS_RF_KILL_HW, &priv->status) && - iwl_is_ready(priv)) - iwl4965_send_card_state(priv, - CARD_STATE_CMD_DISABLE, - 0); - set_bit(STATUS_RF_KILL_SW, &priv->status); - - /* make sure mac80211 stop sending Tx frame */ - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - } - return; - } - - spin_lock_irqsave(&priv->lock, flags); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - clear_bit(STATUS_RF_KILL_SW, &priv->status); - spin_unlock_irqrestore(&priv->lock, flags); - - /* wake up ucode */ - msleep(10); - - spin_lock_irqsave(&priv->lock, flags); - iwl_read32(priv, CSR_UCODE_DRV_GP1); - if (!iwl_grab_nic_access(priv)) - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - if (test_bit(STATUS_RF_KILL_HW, &priv->status)) { - IWL_DEBUG_RF_KILL("Can not turn radio back on - " - "disabled by HW switch\n"); - return; - } - - queue_work(priv->workqueue, &priv->restart); - return; -} - -void iwl4965_set_decrypted_flag(struct iwl_priv *priv, struct sk_buff *skb, - u32 decrypt_res, struct ieee80211_rx_status *stats) -{ - u16 fc = - le16_to_cpu(((struct ieee80211_hdr *)skb->data)->frame_control); - - if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK) - return; - - if (!(fc & IEEE80211_FCTL_PROTECTED)) - return; - - IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res); - switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { - case RX_RES_STATUS_SEC_TYPE_TKIP: - /* The uCode has got a bad phase 1 Key, pushes the packet. - * Decryption will be done in SW. */ - if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == - RX_RES_STATUS_BAD_KEY_TTAK) - break; - - if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == - RX_RES_STATUS_BAD_ICV_MIC) - stats->flag |= RX_FLAG_MMIC_ERROR; - case RX_RES_STATUS_SEC_TYPE_WEP: - case RX_RES_STATUS_SEC_TYPE_CCMP: - if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == - RX_RES_STATUS_DECRYPT_OK) { - IWL_DEBUG_RX("hw decrypt successfully!!!\n"); - stats->flag |= RX_FLAG_DECRYPTED; - } - break; - - default: - break; - } -} - - -#define IWL_PACKET_RETRY_TIME HZ - -int iwl4965_is_duplicate_packet(struct iwl_priv *priv, struct ieee80211_hdr *header) -{ - u16 sc = le16_to_cpu(header->seq_ctrl); - u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4; - u16 frag = sc & IEEE80211_SCTL_FRAG; - u16 *last_seq, *last_frag; - unsigned long *last_time; - - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_IBSS:{ - struct list_head *p; - struct iwl4965_ibss_seq *entry = NULL; - u8 *mac = header->addr2; - int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1); - - __list_for_each(p, &priv->ibss_mac_hash[index]) { - entry = list_entry(p, struct iwl4965_ibss_seq, list); - if (!compare_ether_addr(entry->mac, mac)) - break; - } - if (p == &priv->ibss_mac_hash[index]) { - entry = kzalloc(sizeof(*entry), GFP_ATOMIC); - if (!entry) { - IWL_ERROR("Cannot malloc new mac entry\n"); - return 0; - } - memcpy(entry->mac, mac, ETH_ALEN); - entry->seq_num = seq; - entry->frag_num = frag; - entry->packet_time = jiffies; - list_add(&entry->list, &priv->ibss_mac_hash[index]); - return 0; - } - last_seq = &entry->seq_num; - last_frag = &entry->frag_num; - last_time = &entry->packet_time; - break; - } - case IEEE80211_IF_TYPE_STA: - last_seq = &priv->last_seq_num; - last_frag = &priv->last_frag_num; - last_time = &priv->last_packet_time; - break; - default: - return 0; - } - if ((*last_seq == seq) && - time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) { - if (*last_frag == frag) - goto drop; - if (*last_frag + 1 != frag) - /* out-of-order fragment */ - goto drop; - } else - *last_seq = seq; - - *last_frag = frag; - *last_time = jiffies; - return 0; - - drop: - return 1; -} - -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - -#include "iwl-spectrum.h" - -#define BEACON_TIME_MASK_LOW 0x00FFFFFF -#define BEACON_TIME_MASK_HIGH 0xFF000000 -#define TIME_UNIT 1024 - -/* - * extended beacon time format - * time in usec will be changed into a 32-bit value in 8:24 format - * the high 1 byte is the beacon counts - * the lower 3 bytes is the time in usec within one beacon interval - */ - -static u32 iwl4965_usecs_to_beacons(u32 usec, u32 beacon_interval) -{ - u32 quot; - u32 rem; - u32 interval = beacon_interval * 1024; - - if (!interval || !usec) - return 0; - - quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24); - rem = (usec % interval) & BEACON_TIME_MASK_LOW; - - return (quot << 24) + rem; -} - -/* base is usually what we get from ucode with each received frame, - * the same as HW timer counter counting down - */ - -static __le32 iwl4965_add_beacon_time(u32 base, u32 addon, u32 beacon_interval) -{ - u32 base_low = base & BEACON_TIME_MASK_LOW; - u32 addon_low = addon & BEACON_TIME_MASK_LOW; - u32 interval = beacon_interval * TIME_UNIT; - u32 res = (base & BEACON_TIME_MASK_HIGH) + - (addon & BEACON_TIME_MASK_HIGH); - - if (base_low > addon_low) - res += base_low - addon_low; - else if (base_low < addon_low) { - res += interval + base_low - addon_low; - res += (1 << 24); - } else - res += (1 << 24); - - return cpu_to_le32(res); -} - -static int iwl4965_get_measurement(struct iwl_priv *priv, - struct ieee80211_measurement_params *params, - u8 type) -{ - struct iwl4965_spectrum_cmd spectrum; - struct iwl4965_rx_packet *res; - struct iwl_host_cmd cmd = { - .id = REPLY_SPECTRUM_MEASUREMENT_CMD, - .data = (void *)&spectrum, - .meta.flags = CMD_WANT_SKB, - }; - u32 add_time = le64_to_cpu(params->start_time); - int rc; - int spectrum_resp_status; - int duration = le16_to_cpu(params->duration); - - if (iwl_is_associated(priv)) - add_time = - iwl4965_usecs_to_beacons( - le64_to_cpu(params->start_time) - priv->last_tsf, - le16_to_cpu(priv->rxon_timing.beacon_interval)); - - memset(&spectrum, 0, sizeof(spectrum)); - - spectrum.channel_count = cpu_to_le16(1); - spectrum.flags = - RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; - spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; - cmd.len = sizeof(spectrum); - spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); - - if (iwl_is_associated(priv)) - spectrum.start_time = - iwl4965_add_beacon_time(priv->last_beacon_time, - add_time, - le16_to_cpu(priv->rxon_timing.beacon_interval)); - else - spectrum.start_time = 0; - - spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); - spectrum.channels[0].channel = params->channel; - spectrum.channels[0].type = type; - if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK) - spectrum.flags |= RXON_FLG_BAND_24G_MSK | - RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK; - - rc = iwl_send_cmd_sync(priv, &cmd); - if (rc) - return rc; - - res = (struct iwl4965_rx_packet *)cmd.meta.u.skb->data; - if (res->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n"); - rc = -EIO; - } - - spectrum_resp_status = le16_to_cpu(res->u.spectrum.status); - switch (spectrum_resp_status) { - case 0: /* Command will be handled */ - if (res->u.spectrum.id != 0xff) { - IWL_DEBUG_INFO - ("Replaced existing measurement: %d\n", - res->u.spectrum.id); - priv->measurement_status &= ~MEASUREMENT_READY; - } - priv->measurement_status |= MEASUREMENT_ACTIVE; - rc = 0; - break; - - case 1: /* Command will not be handled */ - rc = -EAGAIN; - break; - } - - dev_kfree_skb_any(cmd.meta.u.skb); - - return rc; -} -#endif - -static void iwl4965_txstatus_to_ieee(struct iwl_priv *priv, - struct iwl4965_tx_info *tx_sta) -{ - - tx_sta->status.ack_signal = 0; - tx_sta->status.excessive_retries = 0; - tx_sta->status.queue_length = 0; - tx_sta->status.queue_number = 0; - - if (in_interrupt()) - ieee80211_tx_status_irqsafe(priv->hw, - tx_sta->skb[0], &(tx_sta->status)); - else - ieee80211_tx_status(priv->hw, - tx_sta->skb[0], &(tx_sta->status)); - - tx_sta->skb[0] = NULL; -} - -/** - * iwl4965_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd - * - * When FW advances 'R' index, all entries between old and new 'R' index - * need to be reclaimed. As result, some free space forms. If there is - * enough free space (> low mark), wake the stack that feeds us. - */ -int iwl4965_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) -{ - struct iwl4965_tx_queue *txq = &priv->txq[txq_id]; - struct iwl4965_queue *q = &txq->q; - int nfreed = 0; - - if ((index >= q->n_bd) || (x2_queue_used(q, index) == 0)) { - IWL_ERROR("Read index for DMA queue txq id (%d), index %d, " - "is out of range [0-%d] %d %d.\n", txq_id, - index, q->n_bd, q->write_ptr, q->read_ptr); - return 0; - } - - for (index = iwl_queue_inc_wrap(index, q->n_bd); - q->read_ptr != index; - q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { - if (txq_id != IWL_CMD_QUEUE_NUM) { - iwl4965_txstatus_to_ieee(priv, - &(txq->txb[txq->q.read_ptr])); - iwl4965_hw_txq_free_tfd(priv, txq); - } else if (nfreed > 1) { - IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index, - q->write_ptr, q->read_ptr); - queue_work(priv->workqueue, &priv->restart); - } - nfreed++; - } - -/* if (iwl4965_queue_space(q) > q->low_mark && (txq_id >= 0) && - (txq_id != IWL_CMD_QUEUE_NUM) && - priv->mac80211_registered) - ieee80211_wake_queue(priv->hw, txq_id); */ - - - return nfreed; -} - -static int iwl4965_is_tx_success(u32 status) -{ - status &= TX_STATUS_MSK; - return (status == TX_STATUS_SUCCESS) - || (status == TX_STATUS_DIRECT_DONE); -} - -/****************************************************************************** - * - * Generic RX handler implementations - * - ******************************************************************************/ -#ifdef CONFIG_IWL4965_HT - -static inline int iwl4965_get_ra_sta_id(struct iwl_priv *priv, - struct ieee80211_hdr *hdr) -{ - if (priv->iw_mode == IEEE80211_IF_TYPE_STA) - return IWL_AP_ID; - else { - u8 *da = ieee80211_get_DA(hdr); - return iwl4965_hw_find_station(priv, da); - } -} - -static struct ieee80211_hdr *iwl4965_tx_queue_get_hdr( - struct iwl_priv *priv, int txq_id, int idx) -{ - if (priv->txq[txq_id].txb[idx].skb[0]) - return (struct ieee80211_hdr *)priv->txq[txq_id]. - txb[idx].skb[0]->data; - return NULL; -} - -static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp) -{ - __le32 *scd_ssn = (__le32 *)((u32 *)&tx_resp->status + - tx_resp->frame_count); - return le32_to_cpu(*scd_ssn) & MAX_SN; - -} - -/** - * iwl4965_tx_status_reply_tx - Handle Tx rspnse for frames in aggregation queue - */ -static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, - struct iwl4965_ht_agg *agg, - struct iwl4965_tx_resp_agg *tx_resp, - u16 start_idx) -{ - u16 status; - struct agg_tx_status *frame_status = &tx_resp->status; - struct ieee80211_tx_status *tx_status = NULL; - struct ieee80211_hdr *hdr = NULL; - int i, sh; - int txq_id, idx; - u16 seq; - - if (agg->wait_for_ba) - IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n"); - - agg->frame_count = tx_resp->frame_count; - agg->start_idx = start_idx; - agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); - agg->bitmap = 0; - - /* # frames attempted by Tx command */ - if (agg->frame_count == 1) { - /* Only one frame was attempted; no block-ack will arrive */ - status = le16_to_cpu(frame_status[0].status); - seq = le16_to_cpu(frame_status[0].sequence); - idx = SEQ_TO_INDEX(seq); - txq_id = SEQ_TO_QUEUE(seq); - - /* FIXME: code repetition */ - IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n", - agg->frame_count, agg->start_idx, idx); - - tx_status = &(priv->txq[txq_id].txb[idx].status); - tx_status->retry_count = tx_resp->failure_frame; - tx_status->queue_number = status & 0xff; - tx_status->queue_length = tx_resp->failure_rts; - tx_status->control.flags &= ~IEEE80211_TXCTL_AMPDU; - tx_status->flags = iwl4965_is_tx_success(status)? - IEEE80211_TX_STATUS_ACK : 0; - iwl4965_hwrate_to_tx_control(priv, - le32_to_cpu(tx_resp->rate_n_flags), - &tx_status->control); - /* FIXME: code repetition end */ - - IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n", - status & 0xff, tx_resp->failure_frame); - IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", - iwl4965_hw_get_rate_n_flags(tx_resp->rate_n_flags)); - - agg->wait_for_ba = 0; - } else { - /* Two or more frames were attempted; expect block-ack */ - u64 bitmap = 0; - int start = agg->start_idx; - - /* Construct bit-map of pending frames within Tx window */ - for (i = 0; i < agg->frame_count; i++) { - u16 sc; - status = le16_to_cpu(frame_status[i].status); - seq = le16_to_cpu(frame_status[i].sequence); - idx = SEQ_TO_INDEX(seq); - txq_id = SEQ_TO_QUEUE(seq); - - if (status & (AGG_TX_STATE_FEW_BYTES_MSK | - AGG_TX_STATE_ABORT_MSK)) - continue; - - IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n", - agg->frame_count, txq_id, idx); - - hdr = iwl4965_tx_queue_get_hdr(priv, txq_id, idx); - - sc = le16_to_cpu(hdr->seq_ctrl); - if (idx != (SEQ_TO_SN(sc) & 0xff)) { - IWL_ERROR("BUG_ON idx doesn't match seq control" - " idx=%d, seq_idx=%d, seq=%d\n", - idx, SEQ_TO_SN(sc), - hdr->seq_ctrl); - return -1; - } - - IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", - i, idx, SEQ_TO_SN(sc)); - - sh = idx - start; - if (sh > 64) { - sh = (start - idx) + 0xff; - bitmap = bitmap << sh; - sh = 0; - start = idx; - } else if (sh < -64) - sh = 0xff - (start - idx); - else if (sh < 0) { - sh = start - idx; - start = idx; - bitmap = bitmap << sh; - sh = 0; - } - bitmap |= (1 << sh); - IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n", - start, (u32)(bitmap & 0xFFFFFFFF)); - } - - agg->bitmap = bitmap; - agg->start_idx = start; - agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); - IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n", - agg->frame_count, agg->start_idx, - (unsigned long long)agg->bitmap); - - if (bitmap) - agg->wait_for_ba = 1; - } - return 0; -} -#endif - -/** - * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response - */ -static void iwl4965_rx_reply_tx(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int index = SEQ_TO_INDEX(sequence); - struct iwl4965_tx_queue *txq = &priv->txq[txq_id]; - struct ieee80211_tx_status *tx_status; - struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; - u32 status = le32_to_cpu(tx_resp->status); -#ifdef CONFIG_IWL4965_HT - int tid = MAX_TID_COUNT, sta_id = IWL_INVALID_STATION; - struct ieee80211_hdr *hdr; - __le16 *qc; -#endif - - if ((index >= txq->q.n_bd) || (x2_queue_used(&txq->q, index) == 0)) { - IWL_ERROR("Read index for DMA queue txq_id (%d) index %d " - "is out of range [0-%d] %d %d\n", txq_id, - index, txq->q.n_bd, txq->q.write_ptr, - txq->q.read_ptr); - return; - } - -#ifdef CONFIG_IWL4965_HT - hdr = iwl4965_tx_queue_get_hdr(priv, txq_id, index); - qc = ieee80211_get_qos_ctrl(hdr); - - if (qc) - tid = le16_to_cpu(*qc) & 0xf; - - sta_id = iwl4965_get_ra_sta_id(priv, hdr); - if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) { - IWL_ERROR("Station not known\n"); - return; - } - - if (txq->sched_retry) { - const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp); - struct iwl4965_ht_agg *agg = NULL; - - if (!qc) - return; - - agg = &priv->stations[sta_id].tid[tid].agg; - - iwl4965_tx_status_reply_tx(priv, agg, - (struct iwl4965_tx_resp_agg *)tx_resp, index); - - if ((tx_resp->frame_count == 1) && - !iwl4965_is_tx_success(status)) { - /* TODO: send BAR */ - } - - if (txq->q.read_ptr != (scd_ssn & 0xff)) { - int freed; - index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); - IWL_DEBUG_TX_REPLY("Retry scheduler reclaim scd_ssn " - "%d index %d\n", scd_ssn , index); - freed = iwl4965_tx_queue_reclaim(priv, txq_id, index); - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; - - if (iwl4965_queue_space(&txq->q) > txq->q.low_mark && - txq_id >= 0 && priv->mac80211_registered && - agg->state != IWL_EMPTYING_HW_QUEUE_DELBA) - ieee80211_wake_queue(priv->hw, txq_id); - - iwl4965_check_empty_hw_queue(priv, sta_id, tid, txq_id); - } - } else { -#endif /* CONFIG_IWL4965_HT */ - tx_status = &(txq->txb[txq->q.read_ptr].status); - - tx_status->retry_count = tx_resp->failure_frame; - tx_status->queue_number = status; - tx_status->queue_length = tx_resp->bt_kill_count; - tx_status->queue_length |= tx_resp->failure_rts; - tx_status->flags = - iwl4965_is_tx_success(status) ? IEEE80211_TX_STATUS_ACK : 0; - iwl4965_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags), - &tx_status->control); - - IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) rate_n_flags 0x%x " - "retries %d\n", txq_id, iwl4965_get_tx_fail_reason(status), - status, le32_to_cpu(tx_resp->rate_n_flags), - tx_resp->failure_frame); - - IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index); - if (index != -1) { -#ifdef CONFIG_IWL4965_HT - int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index); - - if (tid != MAX_TID_COUNT) - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; - if (iwl4965_queue_space(&txq->q) > txq->q.low_mark && - (txq_id >= 0) && - priv->mac80211_registered) - ieee80211_wake_queue(priv->hw, txq_id); - if (tid != MAX_TID_COUNT) - iwl4965_check_empty_hw_queue(priv, sta_id, tid, txq_id); -#endif - } -#ifdef CONFIG_IWL4965_HT - } -#endif /* CONFIG_IWL4965_HT */ - - if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK)) - IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n"); -} - - -static void iwl4965_rx_reply_alive(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_alive_resp *palive; - struct work_struct *pwork; - - palive = &pkt->u.alive_frame; - - IWL_DEBUG_INFO("Alive ucode status 0x%08X revision " - "0x%01X 0x%01X\n", - palive->is_valid, palive->ver_type, - palive->ver_subtype); - - if (palive->ver_subtype == INITIALIZE_SUBTYPE) { - IWL_DEBUG_INFO("Initialization Alive received.\n"); - memcpy(&priv->card_alive_init, - &pkt->u.alive_frame, - sizeof(struct iwl4965_init_alive_resp)); - pwork = &priv->init_alive_start; - } else { - IWL_DEBUG_INFO("Runtime Alive received.\n"); - memcpy(&priv->card_alive, &pkt->u.alive_frame, - sizeof(struct iwl4965_alive_resp)); - pwork = &priv->alive_start; - } - - /* We delay the ALIVE response by 5ms to - * give the HW RF Kill time to activate... */ - if (palive->is_valid == UCODE_VALID_OK) - queue_delayed_work(priv->workqueue, pwork, - msecs_to_jiffies(5)); - else - IWL_WARNING("uCode did not respond OK.\n"); -} - -static void iwl4965_rx_reply_add_sta(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - - IWL_DEBUG_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status); - return; -} - -static void iwl4965_rx_reply_error(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - - IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) " - "seq 0x%04X ser 0x%08X\n", - le32_to_cpu(pkt->u.err_resp.error_type), - get_cmd_string(pkt->u.err_resp.cmd_id), - pkt->u.err_resp.cmd_id, - le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num), - le32_to_cpu(pkt->u.err_resp.error_info)); -} - -#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x - -static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_rxon_cmd *rxon = (void *)&priv->active_rxon; - struct iwl4965_csa_notification *csa = &(pkt->u.csa_notif); - IWL_DEBUG_11H("CSA notif: channel %d, status %d\n", - le16_to_cpu(csa->channel), le32_to_cpu(csa->status)); - rxon->channel = csa->channel; - priv->staging_rxon.channel = csa->channel; -} - -static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif); - - if (!report->state) { - IWL_DEBUG(IWL_DL_11H | IWL_DL_INFO, - "Spectrum Measure Notification: Start\n"); - return; - } - - memcpy(&priv->measure_report, report, sizeof(*report)); - priv->measurement_status |= MEASUREMENT_READY; -#endif -} - -static void iwl4965_rx_pm_sleep_notif(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_sleep_notification *sleep = &(pkt->u.sleep_notif); - IWL_DEBUG_RX("sleep mode: %d, src: %d\n", - sleep->pm_sleep_mode, sleep->pm_wakeup_src); -#endif -} - -static void iwl4965_rx_pm_debug_statistics_notif(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - IWL_DEBUG_RADIO("Dumping %d bytes of unhandled " - "notification for %s:\n", - le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd)); - iwl_print_hex_dump(IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len)); -} - -static void iwl4965_bg_beacon_update(void *p) -{ - struct iwl_priv *priv = p; - struct sk_buff *beacon; - - /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ - beacon = ieee80211_beacon_get(priv->hw, priv->vif, NULL); - - if (!beacon) { - IWL_ERROR("update beacon failed\n"); - return; - } - - mutex_lock(&priv->mutex); - /* new beacon skb is allocated every time; dispose previous.*/ - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = beacon; - mutex_unlock(&priv->mutex); - - iwl4965_send_beacon_cmd(priv); -} - -static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_beacon_notif *beacon = &(pkt->u.beacon_status); - u8 rate = iwl4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); - - IWL_DEBUG_RX("beacon status %x retries %d iss %d " - "tsf %d %d rate %d\n", - le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK, - beacon->beacon_notify_hdr.failure_frame, - le32_to_cpu(beacon->ibss_mgr_status), - le32_to_cpu(beacon->high_tsf), - le32_to_cpu(beacon->low_tsf), rate); -#endif - - if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && - (!test_bit(STATUS_EXIT_PENDING, &priv->status))) - queue_work(priv->workqueue, &priv->beacon_update); -} - -/* Service response to REPLY_SCAN_CMD (0x80) */ -static void iwl4965_rx_reply_scan(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_scanreq_notification *notif = - (struct iwl4965_scanreq_notification *)pkt->u.raw; - - IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status); -#endif -} - -/* Service SCAN_START_NOTIFICATION (0x82) */ -static void iwl4965_rx_scan_start_notif(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_scanstart_notification *notif = - (struct iwl4965_scanstart_notification *)pkt->u.raw; - priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); - IWL_DEBUG_SCAN("Scan start: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", - notif->channel, - notif->band ? "bg" : "a", - notif->tsf_high, - notif->tsf_low, notif->status, notif->beacon_timer); -} - -/* Service SCAN_RESULTS_NOTIFICATION (0x83) */ -static void iwl4965_rx_scan_results_notif(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_scanresults_notification *notif = - (struct iwl4965_scanresults_notification *)pkt->u.raw; - - IWL_DEBUG_SCAN("Scan ch.res: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d " - "elapsed=%lu usec (%dms since last)\n", - notif->channel, - notif->band ? "bg" : "a", - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - le32_to_cpu(notif->statistics[0]), - le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf, - jiffies_to_msecs(elapsed_jiffies - (priv->last_scan_jiffies, jiffies))); - - priv->last_scan_jiffies = jiffies; - priv->next_scan_jiffies = 0; -} - -/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ -static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - struct iwl4965_scancomplete_notification *scan_notif = (void *)pkt->u.raw; - - IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", - scan_notif->scanned_channels, - scan_notif->tsf_low, - scan_notif->tsf_high, scan_notif->status); - - /* The HW is no longer scanning */ - clear_bit(STATUS_SCAN_HW, &priv->status); - - /* The scan completion notification came in, so kill that timer... */ - cancel_delayed_work(&priv->scan_check); - - IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n", - (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ? - "2.4" : "5.2", - jiffies_to_msecs(elapsed_jiffies - (priv->scan_pass_start, jiffies))); - - /* Remove this scanned band from the list of pending - * bands to scan, band G precedes A in order of scanning - * as seen in iwl_bg_request_scan */ - if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) - priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ); - else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) - priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ); - - /* If a request to abort was given, or the scan did not succeed - * then we reset the scan state machine and terminate, - * re-queuing another scan if one has been requested */ - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_INFO("Aborted scan completed.\n"); - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - } else { - /* If there are more bands on this scan pass reschedule */ - if (priv->scan_bands) - goto reschedule; - } - - priv->last_scan_jiffies = jiffies; - priv->next_scan_jiffies = 0; - IWL_DEBUG_INFO("Setting scan to off\n"); - - clear_bit(STATUS_SCANNING, &priv->status); - - IWL_DEBUG_INFO("Scan took %dms\n", - jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies))); - - queue_work(priv->workqueue, &priv->scan_completed); - - return; - -reschedule: - priv->scan_pass_start = jiffies; - queue_work(priv->workqueue, &priv->request_scan); -} - -/* Handle notification from uCode that card's power state is changing - * due to software, hardware, or critical temperature RFKILL */ -static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; - u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); - unsigned long status = priv->status; - - IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n", - (flags & HW_CARD_DISABLED) ? "Kill" : "On", - (flags & SW_CARD_DISABLED) ? "Kill" : "On"); - - if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | - RF_CARD_DISABLED)) { - - iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - if (!iwl_grab_nic_access(priv)) { - iwl_write_direct32( - priv, HBUS_TARG_MBX_C, - HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - - iwl_release_nic_access(priv); - } - - if (!(flags & RXON_CARD_DISABLED)) { - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - if (!iwl_grab_nic_access(priv)) { - iwl_write_direct32( - priv, HBUS_TARG_MBX_C, - HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - - iwl_release_nic_access(priv); - } - } - - if (flags & RF_CARD_DISABLED) { - iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - iwl_read32(priv, CSR_UCODE_DRV_GP1); - if (!iwl_grab_nic_access(priv)) - iwl_release_nic_access(priv); - } - } - - if (flags & HW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - - if (flags & SW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_SW, &priv->status); - else - clear_bit(STATUS_RF_KILL_SW, &priv->status); - - if (!(flags & RXON_CARD_DISABLED)) - iwl4965_scan_cancel(priv); - - if ((test_bit(STATUS_RF_KILL_HW, &status) != - test_bit(STATUS_RF_KILL_HW, &priv->status)) || - (test_bit(STATUS_RF_KILL_SW, &status) != - test_bit(STATUS_RF_KILL_SW, &priv->status))) - queue_work(priv->workqueue, &priv->rf_kill); - else - wake_up_interruptible(&priv->wait_command_queue); -} - -/** - * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks - * - * Setup the RX handlers for each of the reply types sent from the uCode - * to the host. - * - * This function chains into the hardware specific files for them to setup - * any hardware specific handlers as well. - */ -static void iwl4965_setup_rx_handlers(struct iwl_priv *priv) -{ - priv->rx_handlers[REPLY_ALIVE] = iwl4965_rx_reply_alive; - priv->rx_handlers[REPLY_ADD_STA] = iwl4965_rx_reply_add_sta; - priv->rx_handlers[REPLY_ERROR] = iwl4965_rx_reply_error; - priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl4965_rx_csa; - priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = - iwl4965_rx_spectrum_measure_notif; - priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl4965_rx_pm_sleep_notif; - priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = - iwl4965_rx_pm_debug_statistics_notif; - priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; - - /* - * The same handler is used for both the REPLY to a discrete - * statistics request from the host as well as for the periodic - * statistics notifications (after received beacons) from the uCode. - */ - priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl4965_hw_rx_statistics; - priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl4965_hw_rx_statistics; - - priv->rx_handlers[REPLY_SCAN_CMD] = iwl4965_rx_reply_scan; - priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl4965_rx_scan_start_notif; - priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = - iwl4965_rx_scan_results_notif; - priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = - iwl4965_rx_scan_complete_notif; - priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif; - priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx; - - /* Set up hardware specific Rx handlers */ - iwl4965_hw_rx_handler_setup(priv); -} - -/** - * iwl4965_tx_cmd_complete - Pull unused buffers off the queue and reclaim them - * @rxb: Rx buffer to reclaim - * - * If an Rx buffer has an async callback associated with it the callback - * will be executed. The attached skb (if present) will only be freed - * if the callback returns 1 - */ -static void iwl4965_tx_cmd_complete(struct iwl_priv *priv, - struct iwl4965_rx_mem_buffer *rxb) -{ - struct iwl4965_rx_packet *pkt = (struct iwl4965_rx_packet *)rxb->skb->data; - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int index = SEQ_TO_INDEX(sequence); - int huge = sequence & SEQ_HUGE_FRAME; - int cmd_index; - struct iwl_cmd *cmd; - - /* If a Tx command is being handled and it isn't in the actual - * command queue then there a command routing bug has been introduced - * in the queue management code. */ - if (txq_id != IWL_CMD_QUEUE_NUM) - IWL_ERROR("Error wrong command queue %d command id 0x%X\n", - txq_id, pkt->hdr.cmd); - BUG_ON(txq_id != IWL_CMD_QUEUE_NUM); - - cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge); - cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; - - /* Input error checking is done when commands are added to queue. */ - if (cmd->meta.flags & CMD_WANT_SKB) { - cmd->meta.source->u.skb = rxb->skb; - rxb->skb = NULL; - } else if (cmd->meta.u.callback && - !cmd->meta.u.callback(priv, cmd, rxb->skb)) - rxb->skb = NULL; - - iwl4965_tx_queue_reclaim(priv, txq_id, index); - - if (!(cmd->meta.flags & CMD_ASYNC)) { - clear_bit(STATUS_HCMD_ACTIVE, &priv->status); - wake_up_interruptible(&priv->wait_command_queue); - } -} - -/************************** RX-FUNCTIONS ****************************/ -/* - * Rx theory of operation - * - * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), - * each of which point to Receive Buffers to be filled by 4965. These get - * used not only for Rx frames, but for any command response or notification - * from the 4965. The driver and 4965 manage the Rx buffers by means - * of indexes into the circular buffer. - * - * Rx Queue Indexes - * The host/firmware share two index registers for managing the Rx buffers. - * - * The READ index maps to the first position that the firmware may be writing - * to -- the driver can read up to (but not including) this position and get - * good data. - * The READ index is managed by the firmware once the card is enabled. - * - * The WRITE index maps to the last position the driver has read from -- the - * position preceding WRITE is the last slot the firmware can place a packet. - * - * The queue is empty (no good data) if WRITE = READ - 1, and is full if - * WRITE = READ. - * - * During initialization, the host sets up the READ queue position to the first - * INDEX position, and WRITE to the last (READ - 1 wrapped) - * - * When the firmware places a packet in a buffer, it will advance the READ index - * and fire the RX interrupt. The driver can then query the READ index and - * process as many packets as possible, moving the WRITE index forward as it - * resets the Rx queue buffers with new memory. - * - * The management in the driver is as follows: - * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When - * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled - * to replenish the iwl->rxq->rx_free. - * + In iwl4965_rx_replenish (scheduled) if 'processed' != 'read' then the - * iwl->rxq is replenished and the READ INDEX is updated (updating the - * 'processed' and 'read' driver indexes as well) - * + A received packet is processed and handed to the kernel network stack, - * detached from the iwl->rxq. The driver 'processed' index is updated. - * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free - * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ - * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there - * were enough free buffers and RX_STALLED is set it is cleared. - * - * - * Driver sequence: - * - * iwl4965_rx_queue_alloc() Allocates rx_free - * iwl4965_rx_replenish() Replenishes rx_free list from rx_used, and calls - * iwl4965_rx_queue_restock - * iwl4965_rx_queue_restock() Moves available buffers from rx_free into Rx - * queue, updates firmware pointers, and updates - * the WRITE index. If insufficient rx_free buffers - * are available, schedules iwl4965_rx_replenish - * - * -- enable interrupts -- - * ISR - iwl4965_rx() Detach iwl4965_rx_mem_buffers from pool up to the - * READ INDEX, detaching the SKB from the pool. - * Moves the packet buffer from queue to rx_used. - * Calls iwl4965_rx_queue_restock to refill any empty - * slots. - * ... - * - */ - -/** - * iwl4965_rx_queue_space - Return number of free slots available in queue. - */ -static int iwl4965_rx_queue_space(const struct iwl4965_rx_queue *q) -{ - int s = q->read - q->write; - if (s <= 0) - s += RX_QUEUE_SIZE; - /* keep some buffer to not confuse full and empty queue */ - s -= 2; - if (s < 0) - s = 0; - return s; -} - -/** - * iwl4965_rx_queue_update_write_ptr - Update the write pointer for the RX queue - */ -int iwl4965_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl4965_rx_queue *q) -{ - u32 reg = 0; - int rc = 0; - unsigned long flags; - - spin_lock_irqsave(&q->lock, flags); - - if (q->need_update == 0) - goto exit_unlock; - - /* If power-saving is in use, make sure device is awake */ - if (test_bit(STATUS_POWER_PMI, &priv->status)) { - reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); - - if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { - iwl_set_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - goto exit_unlock; - } - - rc = iwl_grab_nic_access(priv); - if (rc) - goto exit_unlock; - - /* Device expects a multiple of 8 */ - iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR, - q->write & ~0x7); - iwl_release_nic_access(priv); - - /* Else device is assumed to be awake */ - } else - /* Device expects a multiple of 8 */ - iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7); - - - q->need_update = 0; - - exit_unlock: - spin_unlock_irqrestore(&q->lock, flags); - return rc; -} - -/** - * iwl4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr - */ -static inline __le32 iwl4965_dma_addr2rbd_ptr(struct iwl_priv *priv, - dma_addr_t dma_addr) -{ - return cpu_to_le32((u32)(dma_addr >> 8)); -} - - -/** - * iwl4965_rx_queue_restock - refill RX queue from pre-allocated pool - * - * If there are slots in the RX queue that need to be restocked, - * and we have free pre-allocated buffers, fill the ranks as much - * as we can, pulling from rx_free. - * - * This moves the 'write' index forward to catch up with 'processed', and - * also updates the memory address in the firmware to reference the new - * target buffer. - */ -static int iwl4965_rx_queue_restock(struct iwl_priv *priv) -{ - struct iwl4965_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl4965_rx_mem_buffer *rxb; - unsigned long flags; - int write, rc; - - spin_lock_irqsave(&rxq->lock, flags); - write = rxq->write & ~0x7; - while ((iwl4965_rx_queue_space(rxq) > 0) && (rxq->free_count)) { - /* Get next free Rx buffer, remove from free list */ - element = rxq->rx_free.next; - rxb = list_entry(element, struct iwl4965_rx_mem_buffer, list); - list_del(element); - - /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwl4965_dma_addr2rbd_ptr(priv, rxb->dma_addr); - rxq->queue[rxq->write] = rxb; - rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; - rxq->free_count--; - } - spin_unlock_irqrestore(&rxq->lock, flags); - /* If the pre-allocated buffer pool is dropping low, schedule to - * refill it */ - if (rxq->free_count <= RX_LOW_WATERMARK) - queue_work(priv->workqueue, &priv->rx_replenish); - - - /* If we've added more space for the firmware to place data, tell it. - * Increment device's write pointer in multiples of 8. */ - if ((write != (rxq->write & ~0x7)) - || (abs(rxq->write - rxq->read) > 7)) { - spin_lock_irqsave(&rxq->lock, flags); - rxq->need_update = 1; - spin_unlock_irqrestore(&rxq->lock, flags); - rc = iwl4965_rx_queue_update_write_ptr(priv, rxq); - if (rc) - return rc; - } - - return 0; -} - -/** - * iwl4965_rx_replenish - Move all used packet from rx_used to rx_free - * - * When moving to rx_free an SKB is allocated for the slot. - * - * Also restock the Rx queue via iwl4965_rx_queue_restock. - * This is called as a scheduled work item (except for during initialization) - */ -static void iwl4965_rx_allocate(struct iwl_priv *priv) -{ - struct iwl4965_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl4965_rx_mem_buffer *rxb; - unsigned long flags; - spin_lock_irqsave(&rxq->lock, flags); - while (!list_empty(&rxq->rx_used)) { - element = rxq->rx_used.next; - rxb = list_entry(element, struct iwl4965_rx_mem_buffer, list); - - /* Alloc a new receive buffer */ - rxb->skb = - alloc_skb(priv->hw_params.rx_buf_size, - __GFP_NOWARN | GFP_ATOMIC); - if (!rxb->skb) { - if (net_ratelimit()) - printk(KERN_CRIT DRV_NAME - ": Can not allocate SKB buffers\n"); - /* We don't reschedule replenish work here -- we will - * call the restock method and if it still needs - * more buffers it will schedule replenish */ - break; - } - priv->alloc_rxb_skb++; - list_del(element); - - /* Get physical address of RB/SKB */ - rxb->dma_addr = - pci_map_single(priv->pci_dev, rxb->skb->data, - priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - } - spin_unlock_irqrestore(&rxq->lock, flags); -} - -/* - * this should be called while priv->lock is locked -*/ -static void __iwl4965_rx_replenish(void *data) -{ - struct iwl_priv *priv = data; - - iwl4965_rx_allocate(priv); - iwl4965_rx_queue_restock(priv); -} - - -void iwl4965_rx_replenish(void *data) -{ - struct iwl_priv *priv = data; - unsigned long flags; - - iwl4965_rx_allocate(priv); - - spin_lock_irqsave(&priv->lock, flags); - iwl4965_rx_queue_restock(priv); - spin_unlock_irqrestore(&priv->lock, flags); -} - -/* Assumes that the skb field of the buffers in 'pool' is kept accurate. - * If an SKB has been detached, the POOL needs to have its SKB set to NULL - * This free routine walks the list of POOL entries and if SKB is set to - * non NULL it is unmapped and freed - */ -static void iwl4965_rx_queue_free(struct iwl_priv *priv, struct iwl4965_rx_queue *rxq) -{ - int i; - for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { - if (rxq->pool[i].skb != NULL) { - pci_unmap_single(priv->pci_dev, - rxq->pool[i].dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); - dev_kfree_skb(rxq->pool[i].skb); - } - } - - pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd, - rxq->dma_addr); - rxq->bd = NULL; -} - -int iwl4965_rx_queue_alloc(struct iwl_priv *priv) -{ - struct iwl4965_rx_queue *rxq = &priv->rxq; - struct pci_dev *dev = priv->pci_dev; - int i; - - spin_lock_init(&rxq->lock); - INIT_LIST_HEAD(&rxq->rx_free); - INIT_LIST_HEAD(&rxq->rx_used); - - /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */ - rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr); - if (!rxq->bd) - return -ENOMEM; - - /* Fill the rx_used queue with _all_ of the Rx buffers */ - for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) - list_add_tail(&rxq->pool[i].list, &rxq->rx_used); - - /* Set us so that we have processed and used all buffers, but have - * not restocked the Rx queue with fresh buffers */ - rxq->read = rxq->write = 0; - rxq->free_count = 0; - rxq->need_update = 0; - return 0; -} - -void iwl4965_rx_queue_reset(struct iwl_priv *priv, struct iwl4965_rx_queue *rxq) -{ - unsigned long flags; - int i; - spin_lock_irqsave(&rxq->lock, flags); - INIT_LIST_HEAD(&rxq->rx_free); - INIT_LIST_HEAD(&rxq->rx_used); - /* Fill the rx_used queue with _all_ of the Rx buffers */ - for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { - /* In the reset function, these buffers may have been allocated - * to an SKB, so we need to unmap and free potential storage */ - if (rxq->pool[i].skb != NULL) { - pci_unmap_single(priv->pci_dev, - rxq->pool[i].dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); - priv->alloc_rxb_skb--; - dev_kfree_skb(rxq->pool[i].skb); - rxq->pool[i].skb = NULL; - } - list_add_tail(&rxq->pool[i].list, &rxq->rx_used); - } - - /* Set us so that we have processed and used all buffers, but have - * not restocked the Rx queue with fresh buffers */ - rxq->read = rxq->write = 0; - rxq->free_count = 0; - spin_unlock_irqrestore(&rxq->lock, flags); -} - -/* Convert linear signal-to-noise ratio into dB */ -static u8 ratio2dB[100] = { -/* 0 1 2 3 4 5 6 7 8 9 */ - 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */ - 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */ - 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */ - 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */ - 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */ - 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */ - 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */ - 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */ - 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */ - 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */ -}; - -/* Calculates a relative dB value from a ratio of linear - * (i.e. not dB) signal levels. - * Conversion assumes that levels are voltages (20*log), not powers (10*log). */ -int iwl4965_calc_db_from_ratio(int sig_ratio) -{ - /* 1000:1 or higher just report as 60 dB */ - if (sig_ratio >= 1000) - return 60; - - /* 100:1 or higher, divide by 10 and use table, - * add 20 dB to make up for divide by 10 */ - if (sig_ratio >= 100) - return (20 + (int)ratio2dB[sig_ratio/10]); - - /* We shouldn't see this */ - if (sig_ratio < 1) - return 0; - - /* Use table for ratios 1:1 - 99:1 */ - return (int)ratio2dB[sig_ratio]; -} - -#define PERFECT_RSSI (-20) /* dBm */ -#define WORST_RSSI (-95) /* dBm */ -#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) - -/* Calculate an indication of rx signal quality (a percentage, not dBm!). - * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info - * about formulas used below. */ -int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm) -{ - int sig_qual; - int degradation = PERFECT_RSSI - rssi_dbm; - - /* If we get a noise measurement, use signal-to-noise ratio (SNR) - * as indicator; formula is (signal dbm - noise dbm). - * SNR at or above 40 is a great signal (100%). - * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. - * Weakest usable signal is usually 10 - 15 dB SNR. */ - if (noise_dbm) { - if (rssi_dbm - noise_dbm >= 40) - return 100; - else if (rssi_dbm < noise_dbm) - return 0; - sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; - - /* Else use just the signal level. - * This formula is a least squares fit of data points collected and - * compared with a reference system that had a percentage (%) display - * for signal quality. */ - } else - sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * - (15 * RSSI_RANGE + 62 * degradation)) / - (RSSI_RANGE * RSSI_RANGE); - - if (sig_qual > 100) - sig_qual = 100; - else if (sig_qual < 1) - sig_qual = 0; - - return sig_qual; -} - -/** - * iwl4965_rx_handle - Main entry function for receiving responses from uCode - * - * Uses the priv->rx_handlers callback function array to invoke - * the appropriate handlers, including command responses, - * frame-received notifications, and other notifications. - */ -static void iwl4965_rx_handle(struct iwl_priv *priv) -{ - struct iwl4965_rx_mem_buffer *rxb; - struct iwl4965_rx_packet *pkt; - struct iwl4965_rx_queue *rxq = &priv->rxq; - u32 r, i; - int reclaim; - unsigned long flags; - u8 fill_rx = 0; - u32 count = 8; - - /* uCode's read index (stored in shared DRAM) indicates the last Rx - * buffer that the driver may process (last buffer filled by ucode). */ - r = iwl4965_hw_get_rx_read(priv); - i = rxq->read; - - /* Rx interrupt, but nothing sent from uCode */ - if (i == r) - IWL_DEBUG(IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i); - - if (iwl4965_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2)) - fill_rx = 1; - - while (i != r) { - rxb = rxq->queue[i]; - - /* If an RXB doesn't have a Rx queue slot associated with it, - * then a bug has been introduced in the queue refilling - * routines -- catch it here */ - BUG_ON(rxb == NULL); - - rxq->queue[i] = NULL; - - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); - pkt = (struct iwl4965_rx_packet *)rxb->skb->data; - - /* Reclaim a command buffer only if this packet is a response - * to a (driver-originated) command. - * If the packet (e.g. Rx frame) originated from uCode, - * there is no command buffer to reclaim. - * Ucode should set SEQ_RX_FRAME bit if ucode-originated, - * but apparently a few don't get set; catch them here. */ - reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && - (pkt->hdr.cmd != REPLY_RX_PHY_CMD) && - (pkt->hdr.cmd != REPLY_RX) && - (pkt->hdr.cmd != REPLY_COMPRESSED_BA) && - (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && - (pkt->hdr.cmd != REPLY_TX); - - /* Based on type of command response or notification, - * handle those that need handling via function in - * rx_handlers table. See iwl4965_setup_rx_handlers() */ - if (priv->rx_handlers[pkt->hdr.cmd]) { - IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR, - "r = %d, i = %d, %s, 0x%02x\n", r, i, - get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); - } else { - /* No handling needed */ - IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR, - "r %d i %d No handler needed for %s, 0x%02x\n", - r, i, get_cmd_string(pkt->hdr.cmd), - pkt->hdr.cmd); - } - - if (reclaim) { - /* Invoke any callbacks, transfer the skb to caller, and - * fire off the (possibly) blocking iwl_send_cmd() - * as we reclaim the driver command queue */ - if (rxb && rxb->skb) - iwl4965_tx_cmd_complete(priv, rxb); - else - IWL_WARNING("Claim null rxb?\n"); - } - - /* For now we just don't re-use anything. We can tweak this - * later to try and re-use notification packets and SKBs that - * fail to Rx correctly */ - if (rxb->skb != NULL) { - priv->alloc_rxb_skb--; - dev_kfree_skb_any(rxb->skb); - rxb->skb = NULL; - } - - pci_unmap_single(priv->pci_dev, rxb->dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); - spin_lock_irqsave(&rxq->lock, flags); - list_add_tail(&rxb->list, &priv->rxq.rx_used); - spin_unlock_irqrestore(&rxq->lock, flags); - i = (i + 1) & RX_QUEUE_MASK; - /* If there are a lot of unused frames, - * restock the Rx queue so ucode wont assert. */ - if (fill_rx) { - count++; - if (count >= 8) { - priv->rxq.read = i; - __iwl4965_rx_replenish(priv); - count = 0; - } - } - } - - /* Backtrack one entry */ - priv->rxq.read = i; - iwl4965_rx_queue_restock(priv); -} - -/** - * iwl4965_tx_queue_update_write_ptr - Send new write index to hardware - */ -static int iwl4965_tx_queue_update_write_ptr(struct iwl_priv *priv, - struct iwl4965_tx_queue *txq) -{ - u32 reg = 0; - int rc = 0; - int txq_id = txq->q.id; - - if (txq->need_update == 0) - return rc; - - /* if we're trying to save power */ - if (test_bit(STATUS_POWER_PMI, &priv->status)) { - /* wake up nic if it's powered down ... - * uCode will wake up, and interrupt us again, so next - * time we'll skip this part. */ - reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); - - if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { - IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg); - iwl_set_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - return rc; - } - - /* restore this queue's parameters in nic hardware. */ - rc = iwl_grab_nic_access(priv); - if (rc) - return rc; - iwl_write_direct32(priv, HBUS_TARG_WRPTR, - txq->q.write_ptr | (txq_id << 8)); - iwl_release_nic_access(priv); - - /* else not in power-save mode, uCode will never sleep when we're - * trying to tx (during RFKILL, we're not trying to tx). */ - } else - iwl_write32(priv, HBUS_TARG_WRPTR, - txq->q.write_ptr | (txq_id << 8)); - - txq->need_update = 0; - - return rc; -} - -#ifdef CONFIG_IWLWIFI_DEBUG -static void iwl4965_print_rx_config_cmd(struct iwl4965_rxon_cmd *rxon) -{ - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_RADIO("RX CONFIG:\n"); - iwl_print_hex_dump(IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); - IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); - IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); - IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n", - le32_to_cpu(rxon->filter_flags)); - IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type); - IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n", - rxon->ofdm_basic_rates); - IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); - IWL_DEBUG_RADIO("u8[6] node_addr: %s\n", - print_mac(mac, rxon->node_addr)); - IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n", - print_mac(mac, rxon->bssid_addr)); - IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); -} -#endif - -static void iwl4965_enable_interrupts(struct iwl_priv *priv) -{ - IWL_DEBUG_ISR("Enabling interrupts\n"); - set_bit(STATUS_INT_ENABLED, &priv->status); - iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK); -} - -/* call this function to flush any scheduled tasklet */ -static inline void iwl_synchronize_irq(struct iwl_priv *priv) -{ - /* wait to make sure we flush pedding tasklet*/ - synchronize_irq(priv->pci_dev->irq); - tasklet_kill(&priv->irq_tasklet); -} - -static inline void iwl4965_disable_interrupts(struct iwl_priv *priv) -{ - clear_bit(STATUS_INT_ENABLED, &priv->status); - - /* disable interrupts from uCode/NIC to host */ - iwl_write32(priv, CSR_INT_MASK, 0x00000000); - - /* acknowledge/clear/reset any interrupts still pending - * from uCode or flow handler (Rx/Tx DMA) */ - iwl_write32(priv, CSR_INT, 0xffffffff); - iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff); - IWL_DEBUG_ISR("Disabled interrupts\n"); -} - -static const char *desc_lookup(int i) -{ - switch (i) { - case 1: - return "FAIL"; - case 2: - return "BAD_PARAM"; - case 3: - return "BAD_CHECKSUM"; - case 4: - return "NMI_INTERRUPT"; - case 5: - return "SYSASSERT"; - case 6: - return "FATAL_ERROR"; - } - - return "UNKNOWN"; -} - -#define ERROR_START_OFFSET (1 * sizeof(u32)) -#define ERROR_ELEM_SIZE (7 * sizeof(u32)) - -static void iwl4965_dump_nic_error_log(struct iwl_priv *priv) -{ - u32 data2, line; - u32 desc, time, count, base, data1; - u32 blink1, blink2, ilink1, ilink2; - int rc; - - base = le32_to_cpu(priv->card_alive.error_event_table_ptr); - - if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { - IWL_ERROR("Not valid error log pointer 0x%08X\n", base); - return; - } - - rc = iwl_grab_nic_access(priv); - if (rc) { - IWL_WARNING("Can not read from adapter at this time.\n"); - return; - } - - count = iwl_read_targ_mem(priv, base); - - if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { - IWL_ERROR("Start IWL Error Log Dump:\n"); - IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count); - } - - desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32)); - blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32)); - blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32)); - ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32)); - ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32)); - data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32)); - data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32)); - line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32)); - time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32)); - - IWL_ERROR("Desc Time " - "data1 data2 line\n"); - IWL_ERROR("%-13s (#%d) %010u 0x%08X 0x%08X %u\n", - desc_lookup(desc), desc, time, data1, data2, line); - IWL_ERROR("blink1 blink2 ilink1 ilink2\n"); - IWL_ERROR("0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2, - ilink1, ilink2); - - iwl_release_nic_access(priv); -} - -#define EVENT_START_OFFSET (4 * sizeof(u32)) - -/** - * iwl4965_print_event_log - Dump error event log to syslog - * - * NOTE: Must be called with iwl_grab_nic_access() already obtained! - */ -static void iwl4965_print_event_log(struct iwl_priv *priv, u32 start_idx, - u32 num_events, u32 mode) -{ - u32 i; - u32 base; /* SRAM byte address of event log header */ - u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - - if (num_events == 0) - return; - - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - - if (mode == 0) - event_size = 2 * sizeof(u32); - else - event_size = 3 * sizeof(u32); - - ptr = base + EVENT_START_OFFSET + (start_idx * event_size); - - /* "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. */ - for (i = 0; i < num_events; i++) { - ev = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - time = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - if (mode == 0) - IWL_ERROR("0x%08x\t%04u\n", time, ev); /* data, ev */ - else { - data = iwl_read_targ_mem(priv, ptr); - ptr += sizeof(u32); - IWL_ERROR("%010u\t0x%08x\t%04u\n", time, data, ev); - } - } -} - -static void iwl4965_dump_nic_event_log(struct iwl_priv *priv) -{ - int rc; - u32 base; /* SRAM byte address of event log header */ - u32 capacity; /* event log capacity in # entries */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - u32 size; /* # entries that we'll print */ - - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { - IWL_ERROR("Invalid event log pointer 0x%08X\n", base); - return; - } - - rc = iwl_grab_nic_access(priv); - if (rc) { - IWL_WARNING("Can not read from adapter at this time.\n"); - return; - } - - /* event log header */ - capacity = iwl_read_targ_mem(priv, base); - mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); - num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); - next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); - - size = num_wraps ? capacity : next_entry; - - /* bail out if nothing in log */ - if (size == 0) { - IWL_ERROR("Start IWL Event Log Dump: nothing in log\n"); - iwl_release_nic_access(priv); - return; - } - - IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n", - size, num_wraps); - - /* if uCode has wrapped back to top of log, start at the oldest entry, - * i.e the next one that uCode would fill. */ - if (num_wraps) - iwl4965_print_event_log(priv, next_entry, - capacity - next_entry, mode); - - /* (then/else) start at top of log */ - iwl4965_print_event_log(priv, 0, next_entry, mode); - - iwl_release_nic_access(priv); -} - -/** - * iwl4965_irq_handle_error - called for HW or SW error interrupt from card - */ -static void iwl4965_irq_handle_error(struct iwl_priv *priv) -{ - /* Set the FW error flag -- cleared on iwl4965_down */ - set_bit(STATUS_FW_ERROR, &priv->status); - - /* Cancel currently queued command. */ - clear_bit(STATUS_HCMD_ACTIVE, &priv->status); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_debug_level & IWL_DL_FW_ERRORS) { - iwl4965_dump_nic_error_log(priv); - iwl4965_dump_nic_event_log(priv); - iwl4965_print_rx_config_cmd(&priv->staging_rxon); - } -#endif - - wake_up_interruptible(&priv->wait_command_queue); - - /* Keep the restart process from trying to send host - * commands by clearing the INIT status bit */ - clear_bit(STATUS_READY, &priv->status); - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_DEBUG(IWL_DL_INFO | IWL_DL_FW_ERRORS, - "Restarting adapter due to uCode error.\n"); - - if (iwl_is_associated(priv)) { - memcpy(&priv->recovery_rxon, &priv->active_rxon, - sizeof(priv->recovery_rxon)); - priv->error_recovering = 1; - } - queue_work(priv->workqueue, &priv->restart); - } -} - -static void iwl4965_error_recovery(struct iwl_priv *priv) -{ - unsigned long flags; - - memcpy(&priv->staging_rxon, &priv->recovery_rxon, - sizeof(priv->staging_rxon)); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - - iwl4965_rxon_add_station(priv, priv->bssid, 1); - - spin_lock_irqsave(&priv->lock, flags); - priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id); - priv->error_recovering = 0; - spin_unlock_irqrestore(&priv->lock, flags); -} - -static void iwl4965_irq_tasklet(struct iwl_priv *priv) -{ - u32 inta, handled = 0; - u32 inta_fh; - unsigned long flags; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_mask; -#endif - - spin_lock_irqsave(&priv->lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - * and will clear only when CSR_FH_INT_STATUS gets cleared. */ - inta = iwl_read32(priv, CSR_INT); - iwl_write32(priv, CSR_INT, inta); - - /* Ack/clear/reset pending flow-handler (DMA) interrupts. - * Any new interrupts that happen after this, either while we're - * in this tasklet, or later, will show up in next ISR/tasklet. */ - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_debug_level & IWL_DL_ISR) { - /* just for debug */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); - IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, inta_mask, inta_fh); - } -#endif - - /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not - * atomic, make sure that inta covers all the interrupts that - * we've discovered, even if FH interrupt came in just after - * reading CSR_INT. */ - if (inta_fh & CSR49_FH_INT_RX_MASK) - inta |= CSR_INT_BIT_FH_RX; - if (inta_fh & CSR49_FH_INT_TX_MASK) - inta |= CSR_INT_BIT_FH_TX; - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERROR("Microcode HW error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - iwl4965_disable_interrupts(priv); - - iwl4965_irq_handle_error(priv); - - handled |= CSR_INT_BIT_HW_ERR; - - spin_unlock_irqrestore(&priv->lock, flags); - - return; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_debug_level & (IWL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) - IWL_DEBUG_ISR("Scheduler finished to transmit " - "the frame/frames.\n"); - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) - IWL_DEBUG_ISR("Alive interrupt\n"); - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* HW RF KILL switch toggled */ - if (inta & CSR_INT_BIT_RF_KILL) { - int hw_rf_kill = 0; - if (!(iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) - hw_rf_kill = 1; - - IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR, - "RF_KILL bit toggled to %s.\n", - hw_rf_kill ? "disable radio":"enable radio"); - - /* Queue restart only if RF_KILL switch was set to "kill" - * when we loaded driver, and is now set to "enable". - * After we're Alive, RF_KILL gets handled by - * iwl4965_rx_card_state_notif() */ - if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) { - clear_bit(STATUS_RF_KILL_HW, &priv->status); - queue_work(priv->workqueue, &priv->restart); - } - - handled |= CSR_INT_BIT_RF_KILL; - } - - /* Chip got too hot and stopped itself */ - if (inta & CSR_INT_BIT_CT_KILL) { - IWL_ERROR("Microcode CT kill error detected.\n"); - handled |= CSR_INT_BIT_CT_KILL; - } - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n", - inta); - iwl4965_irq_handle_error(priv); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* uCode wakes up after power-down sleep */ - if (inta & CSR_INT_BIT_WAKEUP) { - IWL_DEBUG_ISR("Wakeup interrupt\n"); - iwl4965_rx_queue_update_write_ptr(priv, &priv->rxq); - iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[0]); - iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[1]); - iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[2]); - iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[3]); - iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[4]); - iwl4965_tx_queue_update_write_ptr(priv, &priv->txq[5]); - - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - iwl4965_rx_handle(priv); - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - } - - if (inta & CSR_INT_BIT_FH_TX) { - IWL_DEBUG_ISR("Tx interrupt\n"); - handled |= CSR_INT_BIT_FH_TX; - } - - if (inta & ~handled) - IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled); - - if (inta & ~CSR_INI_SET_MASK) { - IWL_WARNING("Disabled INTA bits 0x%08x were pending\n", - inta & ~CSR_INI_SET_MASK); - IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh); - } - - /* Re-enable all interrupts */ - /* only Re-enable if diabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl4965_enable_interrupts(priv); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_debug_level & (IWL_DL_ISR)) { - inta = iwl_read32(priv, CSR_INT); - inta_mask = iwl_read32(priv, CSR_INT_MASK); - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " - "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); - } -#endif - spin_unlock_irqrestore(&priv->lock, flags); -} - -static irqreturn_t iwl4965_isr(int irq, void *data, struct pt_regs *regs) -{ - struct iwl_priv *priv = data; - u32 inta, inta_mask; - u32 inta_fh; - if (!priv) - return IRQ_NONE; - - spin_lock(&priv->lock); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */ - iwl_write32(priv, CSR_INT_MASK, 0x00000000); - - /* Discover which interrupts are active/pending */ - inta = iwl_read32(priv, CSR_INT); - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - if (!inta && !inta_fh) { - IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n"); - goto none; - } - - if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { - /* Hardware disappeared. It might have already raised - * an interrupt */ - IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta); - goto unplugged; - } - - IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, inta_mask, inta_fh); - - inta &= ~CSR_INT_BIT_SCD; - - /* iwl4965_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta || inta_fh)) - tasklet_schedule(&priv->irq_tasklet); - - unplugged: - spin_unlock(&priv->lock); - return IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. */ - /* only Re-enable if diabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl4965_enable_interrupts(priv); - spin_unlock(&priv->lock); - return IRQ_NONE; -} - -/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after - * sending probe req. This should be set long enough to hear probe responses - * from more than one AP. */ -#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_ACTIVE_DWELL_TIME_52 (10) - -/* For faster active scanning, scan will move to the next channel if fewer than - * PLCP_QUIET_THRESH packets are heard on this channel within - * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell - * time if it's a quiet channel (nothing responded to our probe, and there's - * no other traffic). - * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ -#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */ -#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */ - -/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. - * Must be set longer than active dwell time. - * For the most reliable scan, set > AP beacon interval (typically 100msec). */ -#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_PASSIVE_DWELL_TIME_52 (10) -#define IWL_PASSIVE_DWELL_BASE (100) -#define IWL_CHANNEL_TUNE_TIME 5 - -static inline u16 iwl4965_get_active_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band) -{ - if (band == IEEE80211_BAND_5GHZ) - return IWL_ACTIVE_DWELL_TIME_52; - else - return IWL_ACTIVE_DWELL_TIME_24; -} - -static u16 iwl4965_get_passive_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band) -{ - u16 active = iwl4965_get_active_dwell_time(priv, band); - u16 passive = (band != IEEE80211_BAND_5GHZ) ? - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; - - if (iwl_is_associated(priv)) { - /* If we're associated, we clamp the maximum passive - * dwell time to be 98% of the beacon interval (minus - * 2 * channel tune time) */ - passive = priv->beacon_int; - if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive) - passive = IWL_PASSIVE_DWELL_BASE; - passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; - } - - if (passive <= active) - passive = active + 1; - - return passive; -} - -static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, - enum ieee80211_band band, - u8 is_active, u8 direct_mask, - struct iwl4965_scan_channel *scan_ch) -{ - const struct ieee80211_channel *channels = NULL; - const struct ieee80211_supported_band *sband; - const struct iwl_channel_info *ch_info; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added, i; - - sband = iwl4965_get_hw_mode(priv, band); - if (!sband) - return 0; - - channels = sband->channels; - - active_dwell = iwl4965_get_active_dwell_time(priv, band); - passive_dwell = iwl4965_get_passive_dwell_time(priv, band); - - for (i = 0, added = 0; i < sband->n_channels; i++) { - if (channels[i].flags & IEEE80211_CHAN_DISABLED) - continue; - - scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq); - - ch_info = iwl_get_channel_info(priv, band, scan_ch->channel); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n", - scan_ch->channel); - continue; - } - - if (!is_active || is_channel_passive(ch_info) || - (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN)) - scan_ch->type = 0; /* passive */ - else - scan_ch->type = 1; /* active */ - - if (scan_ch->type & 1) - scan_ch->type |= (direct_mask << 1); - - if (is_channel_narrow(ch_info)) - scan_ch->type |= (1 << 7); - - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - - /* Set txpower levels to defaults */ - scan_ch->tpc.dsp_atten = 110; - /* scan_pwr_info->tpc.dsp_atten; */ - - /*scan_pwr_info->tpc.tx_gain; */ - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; - else { - scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - } - - IWL_DEBUG_SCAN("Scanning %d [%s %d]\n", - scan_ch->channel, - (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE", - (scan_ch->type & 1) ? - active_dwell : passive_dwell); - - scan_ch++; - added++; - } - - IWL_DEBUG_SCAN("total channels to scan %d \n", added); - return added; -} - -static void iwl4965_init_hw_rates(struct iwl_priv *priv, - struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < IWL_RATE_COUNT; i++) { - rates[i].bitrate = iwl4965_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on indexes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= - (iwl4965_rates[i].plcp == IWL_RATE_1M_PLCP) ? - 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - -/** - * iwl4965_init_geos - Initialize mac80211's geo/channel info based from eeprom - */ -int iwl4965_init_geos(struct iwl_priv *priv) -{ - struct iwl_channel_info *ch; - struct ieee80211_supported_band *sband; - struct ieee80211_channel *channels; - struct ieee80211_channel *geo_ch; - struct ieee80211_rate *rates; - int i = 0; - - if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || - priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { - IWL_DEBUG_INFO("Geography modes already initialized.\n"); - set_bit(STATUS_GEO_CONFIGURED, &priv->status); - return 0; - } - - channels = kzalloc(sizeof(struct ieee80211_channel) * - priv->channel_count, GFP_KERNEL); - if (!channels) - return -ENOMEM; - - rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)), - GFP_KERNEL); - if (!rates) { - kfree(channels); - return -ENOMEM; - } - - /* 5.2GHz channels start after the 2.4GHz channels */ - sband = &priv->bands[IEEE80211_BAND_5GHZ]; - sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; - /* just OFDM */ - sband->bitrates = &rates[IWL_FIRST_OFDM_RATE]; - sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE; - - iwl4965_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_5GHZ); - - sband = &priv->bands[IEEE80211_BAND_2GHZ]; - sband->channels = channels; - /* OFDM & CCK */ - sband->bitrates = rates; - sband->n_bitrates = IWL_RATE_COUNT; - - iwl4965_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_2GHZ); - - priv->ieee_channels = channels; - priv->ieee_rates = rates; - - iwl4965_init_hw_rates(priv, rates); - - for (i = 0; i < priv->channel_count; i++) { - ch = &priv->channel_info[i]; - - /* FIXME: might be removed if scan is OK */ - if (!is_channel_valid(ch)) - continue; - - if (is_channel_a_band(ch)) - sband = &priv->bands[IEEE80211_BAND_5GHZ]; - else - sband = &priv->bands[IEEE80211_BAND_2GHZ]; - - geo_ch = &sband->channels[sband->n_channels++]; - - geo_ch->center_freq = ieee80211_channel_to_frequency(ch->channel); - geo_ch->max_power = ch->max_power_avg; - geo_ch->max_antenna_gain = 0xff; - geo_ch->hw_value = ch->channel; - - if (is_channel_valid(ch)) { - if (!(ch->flags & EEPROM_CHANNEL_IBSS)) - geo_ch->flags |= IEEE80211_CHAN_NO_IBSS; - - if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) - geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN; - - if (ch->flags & EEPROM_CHANNEL_RADAR) - geo_ch->flags |= IEEE80211_CHAN_RADAR; - - if (ch->max_power_avg > priv->max_channel_txpower_limit) - priv->max_channel_txpower_limit = - ch->max_power_avg; - } else { - geo_ch->flags |= IEEE80211_CHAN_DISABLED; - } - - /* Save flags for reg domain usage */ - geo_ch->orig_flags = geo_ch->flags; - - IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n", - ch->channel, geo_ch->center_freq, - is_channel_a_band(ch) ? "5.2" : "2.4", - geo_ch->flags & IEEE80211_CHAN_DISABLED ? - "restricted" : "valid", - geo_ch->flags); - } - - if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && - priv->cfg->sku & IWL_SKU_A) { - printk(KERN_INFO DRV_NAME - ": Incorrectly detected BG card as ABG. Please send " - "your PCI ID 0x%04X:0x%04X to maintainer.\n", - priv->pci_dev->device, priv->pci_dev->subsystem_device); - priv->cfg->sku &= ~IWL_SKU_A; - } - - printk(KERN_INFO DRV_NAME - ": Tunable channels: %d 802.11bg, %d 802.11a channels\n", - priv->bands[IEEE80211_BAND_2GHZ].n_channels, - priv->bands[IEEE80211_BAND_5GHZ].n_channels); - - if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &priv->bands[IEEE80211_BAND_2GHZ]; - if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &priv->bands[IEEE80211_BAND_5GHZ]; - - set_bit(STATUS_GEO_CONFIGURED, &priv->status); - - return 0; -} - -/* - * iwl4965_free_geos - undo allocations in iwl4965_init_geos - */ -void iwl4965_free_geos(struct iwl_priv *priv) -{ - kfree(priv->ieee_channels); - kfree(priv->ieee_rates); - clear_bit(STATUS_GEO_CONFIGURED, &priv->status); -} - -/****************************************************************************** - * - * uCode download functions - * - ******************************************************************************/ - -static void iwl4965_dealloc_ucode_pci(struct iwl_priv *priv) -{ - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot); -} - -/** - * iwl4965_verify_inst_full - verify runtime uCode image in card vs. host, - * looking at all data. - */ -static int iwl4965_verify_inst_full(struct iwl_priv *priv, __le32 *image, - u32 len) -{ - u32 val; - u32 save_len = len; - int rc = 0; - u32 errcnt; - - IWL_DEBUG_INFO("ucode inst image size is %u\n", len); - - rc = iwl_grab_nic_access(priv); - if (rc) - return rc; - - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND); - - errcnt = 0; - for (; len > 0; len -= sizeof(u32), image++) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { - IWL_ERROR("uCode INST section is invalid at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - save_len - len, val, le32_to_cpu(*image)); - rc = -EIO; - errcnt++; - if (errcnt >= 20) - break; - } - } - - iwl_release_nic_access(priv); - - if (!errcnt) - IWL_DEBUG_INFO - ("ucode image in INSTRUCTION memory is good\n"); - - return rc; -} - - -/** - * iwl4965_verify_inst_sparse - verify runtime uCode image in card vs. host, - * using sample data 100 bytes apart. If these sample points are good, - * it's a pretty good bet that everything between them is good, too. - */ -static int iwl4965_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) -{ - u32 val; - int rc = 0; - u32 errcnt = 0; - u32 i; - - IWL_DEBUG_INFO("ucode inst image size is %u\n", len); - - rc = iwl_grab_nic_access(priv); - if (rc) - return rc; - - for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, - i + RTC_INST_LOWER_BOUND); - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { -#if 0 /* Enable this if you want to see details */ - IWL_ERROR("uCode INST section is invalid at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - i, val, *image); -#endif - rc = -EIO; - errcnt++; - if (errcnt >= 3) - break; - } - } - - iwl_release_nic_access(priv); - - return rc; -} - - -/** - * iwl4965_verify_ucode - determine which instruction image is in SRAM, - * and verify its contents - */ -static int iwl4965_verify_ucode(struct iwl_priv *priv) -{ - __le32 *image; - u32 len; - int rc = 0; - - /* Try bootstrap */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - rc = iwl4965_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n"); - return 0; - } - - /* Try initialize */ - image = (__le32 *)priv->ucode_init.v_addr; - len = priv->ucode_init.len; - rc = iwl4965_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n"); - return 0; - } - - /* Try runtime/protocol */ - image = (__le32 *)priv->ucode_code.v_addr; - len = priv->ucode_code.len; - rc = iwl4965_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n"); - return 0; - } - - IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); - - /* Since nothing seems to match, show first several data entries in - * instruction SRAM, so maybe visual inspection will give a clue. - * Selection of bootstrap image (vs. other images) is arbitrary. */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - rc = iwl4965_verify_inst_full(priv, image, len); - - return rc; -} - -static void iwl4965_nic_start(struct iwl_priv *priv) -{ - /* Remove all resets to allow NIC to operate */ - iwl_write32(priv, CSR_RESET, 0); -} - - -/** - * iwl4965_read_ucode - Read uCode images from disk file. - * - * Copy into buffers for card to fetch via bus-mastering - */ -static int iwl4965_read_ucode(struct iwl_priv *priv) -{ - struct iwl4965_ucode *ucode; - int ret; - const struct firmware *ucode_raw; - const char *name = priv->cfg->fw_name; - u8 *src; - size_t len; - u32 ver, inst_size, data_size, init_size, init_data_size, boot_size; - - /* Ask kernel firmware_class module to get the boot firmware off disk. - * request_firmware() is synchronous, file is in memory on return. */ - ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev); - if (ret < 0) { - IWL_ERROR("%s firmware file req failed: Reason %d\n", - name, ret); - goto error; - } - - IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n", - name, ucode_raw->size); - - /* Make sure that we got at least our header! */ - if (ucode_raw->size < sizeof(*ucode)) { - IWL_ERROR("File size way too small!\n"); - ret = -EINVAL; - goto err_release; - } - - /* Data from ucode file: header followed by uCode images */ - ucode = (void *)ucode_raw->data; - - ver = le32_to_cpu(ucode->ver); - inst_size = le32_to_cpu(ucode->inst_size); - data_size = le32_to_cpu(ucode->data_size); - init_size = le32_to_cpu(ucode->init_size); - init_data_size = le32_to_cpu(ucode->init_data_size); - boot_size = le32_to_cpu(ucode->boot_size); - - IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver); - IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", - inst_size); - IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", - data_size); - IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", - init_size); - IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", - init_data_size); - IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", - boot_size); - - /* Verify size of file vs. image size info in file's header */ - if (ucode_raw->size < sizeof(*ucode) + - inst_size + data_size + init_size + - init_data_size + boot_size) { - - IWL_DEBUG_INFO("uCode file size %d too small\n", - (int)ucode_raw->size); - ret = -EINVAL; - goto err_release; - } - - /* Verify that uCode images will fit in card's SRAM */ - if (inst_size > IWL_MAX_INST_SIZE) { - IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n", - inst_size); - ret = -EINVAL; - goto err_release; - } - - if (data_size > IWL_MAX_DATA_SIZE) { - IWL_DEBUG_INFO("uCode data len %d too large to fit in\n", - data_size); - ret = -EINVAL; - goto err_release; - } - if (init_size > IWL_MAX_INST_SIZE) { - IWL_DEBUG_INFO - ("uCode init instr len %d too large to fit in\n", - init_size); - ret = -EINVAL; - goto err_release; - } - if (init_data_size > IWL_MAX_DATA_SIZE) { - IWL_DEBUG_INFO - ("uCode init data len %d too large to fit in\n", - init_data_size); - ret = -EINVAL; - goto err_release; - } - if (boot_size > IWL_MAX_BSM_SIZE) { - IWL_DEBUG_INFO - ("uCode boot instr len %d too large to fit in\n", - boot_size); - ret = -EINVAL; - goto err_release; - } - - /* Allocate ucode buffers for card's bus-master loading ... */ - - /* Runtime instructions and 2 copies of data: - * 1) unmodified from disk - * 2) backup cache for save/restore during power-downs */ - priv->ucode_code.len = inst_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); - - priv->ucode_data.len = data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); - - priv->ucode_data_backup.len = data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - - /* Initialization instructions and data */ - if (init_size && init_data_size) { - priv->ucode_init.len = init_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); - - priv->ucode_init_data.len = init_data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); - - if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) - goto err_pci_alloc; - } - - /* Bootstrap (instructions only, no data) */ - if (boot_size) { - priv->ucode_boot.len = boot_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); - - if (!priv->ucode_boot.v_addr) - goto err_pci_alloc; - } - - /* Copy images into buffers for card's bus-master reads ... */ - - /* Runtime instructions (first block of data in file) */ - src = &ucode->data[0]; - len = priv->ucode_code.len; - IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len); - memcpy(priv->ucode_code.v_addr, src, len); - IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", - priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); - - /* Runtime data (2nd block) - * NOTE: Copy into backup buffer will be done in iwl4965_up() */ - src = &ucode->data[inst_size]; - len = priv->ucode_data.len; - IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len); - memcpy(priv->ucode_data.v_addr, src, len); - memcpy(priv->ucode_data_backup.v_addr, src, len); - - /* Initialization instructions (3rd block) */ - if (init_size) { - src = &ucode->data[inst_size + data_size]; - len = priv->ucode_init.len; - IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n", - len); - memcpy(priv->ucode_init.v_addr, src, len); - } - - /* Initialization data (4th block) */ - if (init_data_size) { - src = &ucode->data[inst_size + data_size + init_size]; - len = priv->ucode_init_data.len; - IWL_DEBUG_INFO("Copying (but not loading) init data len %Zd\n", - len); - memcpy(priv->ucode_init_data.v_addr, src, len); - } - - /* Bootstrap instructions (5th block) */ - src = &ucode->data[inst_size + data_size + init_size + init_data_size]; - len = priv->ucode_boot.len; - IWL_DEBUG_INFO("Copying (but not loading) boot instr len %Zd\n", len); - memcpy(priv->ucode_boot.v_addr, src, len); - - /* We have our copies now, allow OS release its copies */ - release_firmware(ucode_raw); - return 0; - - err_pci_alloc: - IWL_ERROR("failed to allocate pci memory\n"); - ret = -ENOMEM; - iwl4965_dealloc_ucode_pci(priv); - - err_release: - release_firmware(ucode_raw); - - error: - return ret; -} - - -/** - * iwl4965_set_ucode_ptrs - Set uCode address location - * - * Tell initialization uCode where to find runtime uCode. - * - * BSM registers initially contain pointers to initialization uCode. - * We need to replace them to load runtime uCode inst and data, - * and to save runtime data when powering down. - */ -static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv) -{ - dma_addr_t pinst; - dma_addr_t pdata; - int rc = 0; - unsigned long flags; - - /* bits 35:4 for 4965 */ - pinst = priv->ucode_code.p_addr >> 4; - pdata = priv->ucode_data_backup.p_addr >> 4; - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - - /* Tell bootstrap uCode where to find image to load */ - iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); - iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); - iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, - priv->ucode_data.len); - - /* Inst bytecount must be last to set up, bit 31 signals uCode - * that all new ptr/size info is in place */ - iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, - priv->ucode_code.len | BSM_DRAM_INST_LOAD); - - iwl_release_nic_access(priv); - - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_INFO("Runtime uCode pointers are set.\n"); - - return rc; -} - -/** - * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received - * - * Called after REPLY_ALIVE notification received from "initialize" uCode. - * - * The 4965 "initialize" ALIVE reply contains calibration data for: - * Voltage, temperature, and MIMO tx gain correction, now stored in priv - * (3945 does not contain this data). - * - * Tell "initialize" uCode to go ahead and load the runtime uCode. -*/ -static void iwl4965_init_alive_start(struct iwl_priv *priv) -{ - /* Check alive response for "valid" sign from uCode */ - if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - IWL_DEBUG_INFO("Initialize Alive failed.\n"); - goto restart; - } - - /* Bootstrap uCode has loaded initialize uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "initialize" alive if code weren't properly loaded. */ - if (iwl4965_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n"); - goto restart; - } - - /* Calculate temperature */ - priv->temperature = iwl4965_get_temperature(priv); - - /* Send pointers to protocol/runtime uCode image ... init code will - * load and launch runtime uCode, which will send us another "Alive" - * notification. */ - IWL_DEBUG_INFO("Initialization Alive received.\n"); - if (iwl4965_set_ucode_ptrs(priv)) { - /* Runtime instruction load won't happen; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n"); - goto restart; - } - return; - - restart: - queue_work(priv->workqueue, &priv->restart); -} - - -/** - * iwl4965_alive_start - called after REPLY_ALIVE notification received - * from protocol/runtime uCode (initialization uCode's - * Alive gets handled by iwl4965_init_alive_start()). - */ -static void iwl4965_alive_start(struct iwl_priv *priv) -{ - int ret = 0; - - IWL_DEBUG_INFO("Runtime Alive received.\n"); - - if (priv->card_alive.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - IWL_DEBUG_INFO("Alive failed.\n"); - goto restart; - } - - /* Initialize uCode has loaded Runtime uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "runtime" alive if code weren't properly loaded. */ - if (iwl4965_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO("Bad runtime uCode load.\n"); - goto restart; - } - - iwlcore_clear_stations_table(priv); - - ret = priv->cfg->ops->lib->alive_notify(priv); - if (ret) { - IWL_WARNING("Could not complete ALIVE transition [ntf]: %d\n", - ret); - goto restart; - } - - /* After the ALIVE response, we can send host commands to 4965 uCode */ - set_bit(STATUS_ALIVE, &priv->status); - - /* Clear out the uCode error bit if it is set */ - clear_bit(STATUS_FW_ERROR, &priv->status); - - if (iwl_is_rfkill(priv)) - return; - - ieee80211_start_queues(priv->hw); - - priv->active_rate = priv->rates_mask; - priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; - - iwl4965_send_power_mode(priv, IWL_POWER_LEVEL(priv->power_mode)); - - if (iwl_is_associated(priv)) { - struct iwl4965_rxon_cmd *active_rxon = - (struct iwl4965_rxon_cmd *)(&priv->active_rxon); - - memcpy(&priv->staging_rxon, &priv->active_rxon, - sizeof(priv->staging_rxon)); - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - } else { - /* Initialize our rx_config data */ - iwl4965_connection_init_rx_config(priv); - memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); - } - - /* Configure Bluetooth device coexistence support */ - iwl4965_send_bt_config(priv); - - /* Configure the adapter for unassociated operation */ - iwl4965_commit_rxon(priv); - - /* At this point, the NIC is initialized and operational */ - priv->notif_missed_beacons = 0; - - iwl4965_rf_kill_ct_config(priv); - - iwl_leds_register(priv); - - IWL_DEBUG_INFO("ALIVE processing complete.\n"); - set_bit(STATUS_READY, &priv->status); - wake_up_interruptible(&priv->wait_command_queue); - - if (priv->error_recovering) - iwl4965_error_recovery(priv); - - iwlcore_low_level_notify(priv, IWLCORE_START_EVT); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); - return; - - restart: - queue_work(priv->workqueue, &priv->restart); -} - -static void iwl4965_cancel_deferred_work(struct iwl_priv *priv); - -static void __iwl4965_down(struct iwl_priv *priv) -{ - unsigned long flags; - int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status); - struct ieee80211_conf *conf = NULL; - - IWL_DEBUG_INFO(DRV_NAME " is going down\n"); - - conf = ieee80211_get_hw_conf(priv->hw); - - if (!exit_pending) - set_bit(STATUS_EXIT_PENDING, &priv->status); - - iwl_leds_unregister(priv); - - iwlcore_low_level_notify(priv, IWLCORE_STOP_EVT); - - iwlcore_clear_stations_table(priv); - - /* Unblock any waiting calls */ - wake_up_interruptible_all(&priv->wait_command_queue); - - /* Wipe out the EXIT_PENDING status bit if we are not actually - * exiting the module */ - if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - /* stop and reset the on-board processor */ - iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /* tell the device to stop sending interrupts */ - spin_lock_irqsave(&priv->lock, flags); - iwl4965_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - iwl_synchronize_irq(priv); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - /* If we have not previously called iwl4965_init() then - * clear all bits but the RF Kill and SUSPEND bits and return */ - if (!iwl_is_init(priv)) { - priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_RF_KILL_SW, &priv->status) << - STATUS_RF_KILL_SW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_IN_SUSPEND, &priv->status) << - STATUS_IN_SUSPEND; - goto exit; - } - - /* ...otherwise clear out all the status bits but the RF Kill and - * SUSPEND bits and continue taking the NIC down. */ - priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_RF_KILL_SW, &priv->status) << - STATUS_RF_KILL_SW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_IN_SUSPEND, &priv->status) << - STATUS_IN_SUSPEND | - test_bit(STATUS_FW_ERROR, &priv->status) << - STATUS_FW_ERROR; - - spin_lock_irqsave(&priv->lock, flags); - iwl_clear_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl4965_hw_txq_ctx_stop(priv); - iwl4965_hw_rxq_stop(priv); - - spin_lock_irqsave(&priv->lock, flags); - if (!iwl_grab_nic_access(priv)) { - iwl_write_prph(priv, APMG_CLK_DIS_REG, - APMG_CLK_VAL_DMA_CLK_RQT); - iwl_release_nic_access(priv); - } - spin_unlock_irqrestore(&priv->lock, flags); - - udelay(5); - - iwl4965_hw_nic_stop_master(priv); - iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - iwl4965_hw_nic_reset(priv); - - exit: - memset(&priv->card_alive, 0, sizeof(struct iwl4965_alive_resp)); - - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - priv->ibss_beacon = NULL; - - /* clear out any free frames */ - iwl4965_clear_free_frames(priv); -} - -static void iwl4965_down(struct iwl_priv *priv) -{ - mutex_lock(&priv->mutex); - __iwl4965_down(priv); - mutex_unlock(&priv->mutex); - - iwl4965_cancel_deferred_work(priv); -} - -#define MAX_HW_RESTARTS 5 - -static int __iwl4965_up(struct iwl_priv *priv) -{ - int i; - int ret; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_WARNING("Exit pending; will not bring the NIC up\n"); - return -EIO; - } - - if (test_bit(STATUS_RF_KILL_SW, &priv->status)) { - IWL_WARNING("Radio disabled by SW RF kill (module " - "parameter)\n"); - iwl_rfkill_set_hw_state(priv); - return -ENODEV; - } - - if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { - IWL_ERROR("ucode not available for device bringup\n"); - return -EIO; - } - - /* If platform's RF_KILL switch is NOT set to KILL */ - if (iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &priv->status); - else { - set_bit(STATUS_RF_KILL_HW, &priv->status); - if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) { - iwl_rfkill_set_hw_state(priv); - IWL_WARNING("Radio disabled by HW RF Kill switch\n"); - return -ENODEV; - } - } - - iwl_rfkill_set_hw_state(priv); - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - - ret = priv->cfg->ops->lib->hw_nic_init(priv); - if (ret) { - IWL_ERROR("Unable to init nic\n"); - return ret; - } - - /* make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - /* clear (again), then enable host interrupts */ - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - iwl4965_enable_interrupts(priv); - - /* really make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* Copy original ucode data image from disk into backup cache. - * This will be used to initialize the on-board processor's - * data SRAM for a clean start when the runtime program first loads. */ - memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, - priv->ucode_data.len); - - /* We return success when we resume from suspend and rf_kill is on. */ - if (test_bit(STATUS_RF_KILL_HW, &priv->status)) - return 0; - - for (i = 0; i < MAX_HW_RESTARTS; i++) { - - iwlcore_clear_stations_table(priv); - - /* load bootstrap state machine, - * load bootstrap program into processor's memory, - * prepare to load the "initialize" uCode */ - ret = priv->cfg->ops->lib->load_ucode(priv); - - if (ret) { - IWL_ERROR("Unable to set up bootstrap uCode: %d\n", ret); - continue; - } - - /* start card; "initialize" will load runtime ucode */ - iwl4965_nic_start(priv); - - IWL_DEBUG_INFO(DRV_NAME " is coming up\n"); - - return 0; - } - - set_bit(STATUS_EXIT_PENDING, &priv->status); - __iwl4965_down(priv); - - /* tried to restart and config the device for as long as our - * patience could withstand */ - IWL_ERROR("Unable to initialize device after %d attempts.\n", i); - return -EIO; -} - - -/***************************************************************************** - * - * Workqueue callbacks - * - *****************************************************************************/ - -static void iwl4965_bg_init_alive_start(void *p) -{ - struct iwl_priv *priv = p; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl4965_init_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl4965_bg_alive_start(void *p) -{ - struct iwl_priv *priv = p; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl4965_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl4965_bg_rf_kill(void *p) -{ - struct iwl_priv *priv = p; - - wake_up_interruptible(&priv->wait_command_queue); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - - if (!iwl_is_rfkill(priv)) { - IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL, - "HW and/or SW RF Kill no longer active, restarting " - "device\n"); - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - queue_work(priv->workqueue, &priv->restart); - } else { - /* make sure mac80211 stop sending Tx frame */ - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - if (!test_bit(STATUS_RF_KILL_HW, &priv->status)) - IWL_DEBUG_RF_KILL("Can not turn radio back on - " - "disabled by SW switch\n"); - else - IWL_WARNING("Radio Frequency Kill Switch is On:\n" - "Kill switch must be turned off for " - "wireless networking to work.\n"); - } - iwl_rfkill_set_hw_state(priv); - - mutex_unlock(&priv->mutex); -} - -#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ) - -static void iwl4965_bg_scan_check(void *p) -{ - struct iwl_priv *priv = p; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - if (test_bit(STATUS_SCANNING, &priv->status) || - test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, - "Scan completion watchdog resetting adapter (%dms)\n", - jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG)); - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - iwl4965_send_scan_abort(priv); - } - mutex_unlock(&priv->mutex); -} - -static void iwl4965_bg_request_scan(void *p) -{ - struct iwl_priv *priv = p; - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_CMD, - .len = sizeof(struct iwl4965_scan_cmd), - .meta.flags = CMD_SIZE_HUGE, - }; - struct iwl4965_scan_cmd *scan; - struct ieee80211_conf *conf = NULL; - u16 cmd_len; - enum ieee80211_band band; - u8 direct_mask; - int ret = 0; - - conf = ieee80211_get_hw_conf(priv->hw); - - mutex_lock(&priv->mutex); - - if (!iwl_is_ready(priv)) { - IWL_WARNING("request scan called when driver not ready.\n"); - goto done; - } - - /* Make sure the scan wasn't cancelled before this queued work - * was given the chance to run... */ - if (!test_bit(STATUS_SCANNING, &priv->status)) - goto done; - - /* This should never be called or scheduled if there is currently - * a scan active in the hardware. */ - if (test_bit(STATUS_SCAN_HW, &priv->status)) { - IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. " - "Ignoring second request.\n"); - ret = -EIO; - goto done; - } - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n"); - goto done; - } - - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n"); - goto done; - } - - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n"); - goto done; - } - - if (!test_bit(STATUS_READY, &priv->status)) { - IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n"); - goto done; - } - - if (!priv->scan_bands) { - IWL_DEBUG_HC("Aborting scan due to no requested bands\n"); - goto done; - } - - if (!priv->scan) { - priv->scan = kmalloc(sizeof(struct iwl4965_scan_cmd) + - IWL_MAX_SCAN_SIZE, GFP_KERNEL); - if (!priv->scan) { - ret = -ENOMEM; - goto done; - } - } - scan = priv->scan; - memset(scan, 0, sizeof(struct iwl4965_scan_cmd) + IWL_MAX_SCAN_SIZE); - - scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; - scan->quiet_time = IWL_ACTIVE_QUIET_TIME; - - if (iwl_is_associated(priv)) { - u16 interval = 0; - u32 extra; - u32 suspend_time = 100; - u32 scan_suspend_time = 100; - unsigned long flags; - - IWL_DEBUG_INFO("Scanning while associated...\n"); - - spin_lock_irqsave(&priv->lock, flags); - interval = priv->beacon_int; - spin_unlock_irqrestore(&priv->lock, flags); - - scan->suspend_time = 0; - scan->max_out_time = cpu_to_le32(200 * 1024); - if (!interval) - interval = suspend_time; - - extra = (suspend_time / interval) << 22; - scan_suspend_time = (extra | - ((suspend_time % interval) * 1024)); - scan->suspend_time = cpu_to_le32(scan_suspend_time); - IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n", - scan_suspend_time, interval); - } - - /* We should add the ability for user to lock to PASSIVE ONLY */ - if (priv->one_direct_scan) { - IWL_DEBUG_SCAN - ("Kicking off one direct scan for '%s'\n", - iwl4965_escape_essid(priv->direct_ssid, - priv->direct_ssid_len)); - scan->direct_scan[0].id = WLAN_EID_SSID; - scan->direct_scan[0].len = priv->direct_ssid_len; - memcpy(scan->direct_scan[0].ssid, - priv->direct_ssid, priv->direct_ssid_len); - direct_mask = 1; - } else if (!iwl_is_associated(priv) && priv->essid_len) { - IWL_DEBUG_SCAN - ("Kicking off one direct scan for '%s' when not associated\n", - iwl4965_escape_essid(priv->essid, priv->essid_len)); - scan->direct_scan[0].id = WLAN_EID_SSID; - scan->direct_scan[0].len = priv->essid_len; - memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); - direct_mask = 1; - } else { - IWL_DEBUG_SCAN("Kicking off one indirect scan.\n"); - direct_mask = 0; - } - - scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; - scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id; - scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - - if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) { - scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - scan->tx_cmd.rate_n_flags = - iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP, - RATE_MCS_ANT_B_MSK|RATE_MCS_CCK_MSK); - - scan->good_CRC_th = 0; - band = IEEE80211_BAND_2GHZ; - } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) { - scan->tx_cmd.rate_n_flags = - iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP, - RATE_MCS_ANT_B_MSK); - scan->good_CRC_th = IWL_GOOD_CRC_TH; - band = IEEE80211_BAND_5GHZ; - } else { - IWL_WARNING("Invalid scan band count\n"); - goto done; - } - - /* We don't build a direct scan probe request; the uCode will do - * that based on the direct_mask added to each channel entry */ - cmd_len = iwl4965_fill_probe_req(priv, band, - (struct ieee80211_mgmt *)scan->data, - IWL_MAX_SCAN_SIZE - sizeof(*scan), 0); - - scan->tx_cmd.len = cpu_to_le16(cmd_len); - /* select Rx chains */ - - /* Force use of chains B and C (0x6) for scan Rx. - * Avoid A (0x1) because of its off-channel reception on A-band. - * MIMO is not used here, but value is required to make uCode happy. */ - scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK | - cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) | - (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) | - (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS)); - - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) - scan->filter_flags = RXON_FILTER_PROMISC_MSK; - - if (direct_mask) - scan->channel_count = - iwl4965_get_channels_for_scan( - priv, band, 1, /* active */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - else - scan->channel_count = - iwl4965_get_channels_for_scan( - priv, band, 0, /* passive */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - - cmd.len += le16_to_cpu(scan->tx_cmd.len) + - scan->channel_count * sizeof(struct iwl4965_scan_channel); - cmd.data = scan; - scan->len = cpu_to_le16(cmd.len); - - set_bit(STATUS_SCAN_HW, &priv->status); - ret = iwl_send_cmd_sync(priv, &cmd); - if (ret) - goto done; - - queue_delayed_work(priv->workqueue, &priv->scan_check, - IWL_SCAN_CHECK_WATCHDOG); - - mutex_unlock(&priv->mutex); - return; - - done: - /* inform mac80211 scan aborted */ - queue_work(priv->workqueue, &priv->scan_completed); - mutex_unlock(&priv->mutex); -} - -static void iwl4965_bg_up(void *p) -{ - struct iwl_priv *priv = p; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - __iwl4965_up(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl4965_bg_restart(void *p) -{ - struct iwl_priv *priv = p; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - iwl4965_down(priv); - queue_work(priv->workqueue, &priv->up); -} - -static void iwl4965_bg_rx_replenish(void *p) -{ - struct iwl_priv *priv = p; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl4965_rx_replenish(priv); - mutex_unlock(&priv->mutex); -} - -#define IWL_DELAY_NEXT_SCAN (HZ*2) - -static void iwl4965_post_associate(struct iwl_priv *priv) -{ - struct ieee80211_conf *conf = NULL; - int ret = 0; - DECLARE_MAC_BUF(mac); - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__); - return; - } - - IWL_DEBUG_ASSOC("Associated as %d to: %s\n", - priv->assoc_id, - print_mac(mac, priv->active_rxon.bssid_addr)); - - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - - if (!priv->vif || !priv->is_open) - return; - - iwl4965_scan_cancel_timeout(priv, 200); - - conf = ieee80211_get_hw_conf(priv->hw); - - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - - memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd)); - iwl4965_setup_rxon_timing(priv); - ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, - sizeof(priv->rxon_timing), &priv->rxon_timing); - if (ret) - IWL_WARNING("REPLY_RXON_TIMING failed - " - "Attempting to continue.\n"); - - priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; - -#ifdef CONFIG_IWL4965_HT - if (priv->current_ht_config.is_ht) - iwl4965_set_rxon_ht(priv, &priv->current_ht_config); -#endif /* CONFIG_IWL4965_HT*/ - iwl4965_set_rxon_chain(priv); - priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); - - IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n", - priv->assoc_id, priv->beacon_int); - - if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) - priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { - if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) - priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - } - - iwl4965_commit_rxon(priv); - - switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_STA: - iwl4965_rate_scale_init(priv->hw, IWL_AP_ID); - break; - - case IEEE80211_IF_TYPE_IBSS: - - /* clear out the station table */ - iwlcore_clear_stations_table(priv); - - iwl4965_rxon_add_station(priv, iwl4965_broadcast_addr, 0); - iwl4965_rxon_add_station(priv, priv->bssid, 0); - iwl4965_rate_scale_init(priv->hw, IWL_STA_ID); - iwl4965_send_beacon_cmd(priv); - - break; - - default: - IWL_ERROR("%s Should not be called in %d mode\n", - __FUNCTION__, priv->iw_mode); - break; - } - - iwl4965_sequence_reset(priv); - -#ifdef CONFIG_IWL4965_SENSITIVITY - /* Enable Rx differential gain and sensitivity calibrations */ - iwl4965_chain_noise_reset(priv); - priv->start_calib = 1; -#endif /* CONFIG_IWL4965_SENSITIVITY */ - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - priv->assoc_station_added = 1; - - iwl4965_activate_qos(priv, 0); - - /* we have just associated, don't start scan too early */ - priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN; -} - - -static void iwl4965_bg_post_associate(void *p) -{ - struct iwl_priv *priv = p; - - mutex_lock(&priv->mutex); - iwl4965_post_associate(priv); - mutex_unlock(&priv->mutex); - -} - -static void iwl4965_bg_abort_scan(void *p) -{ - struct iwl_priv *priv = p; - - if (!iwl_is_ready(priv)) - return; - - mutex_lock(&priv->mutex); - - set_bit(STATUS_SCAN_ABORTING, &priv->status); - iwl4965_send_scan_abort(priv); - - mutex_unlock(&priv->mutex); -} - -static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); - -static void iwl4965_bg_scan_completed(void *p) -{ - struct iwl_priv *priv = p; - - IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, "SCAN complete scan\n"); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (test_bit(STATUS_CONF_PENDING, &priv->status)) - iwl4965_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw)); - - ieee80211_scan_completed(priv->hw); - - /* Since setting the TXPOWER may have been deferred while - * performing the scan, fire one off */ - mutex_lock(&priv->mutex); - iwl4965_hw_reg_send_txpower(priv); - mutex_unlock(&priv->mutex); -} - -/***************************************************************************** - * - * mac80211 entry point functions - * - *****************************************************************************/ - -#define UCODE_READY_TIMEOUT (2 * HZ) - -static int iwl4965_mac_start(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - int ret; - - IWL_DEBUG_MAC80211("enter\n"); - - if (pci_enable_device(priv->pci_dev)) { - IWL_ERROR("Fail to pci_enable_device\n"); - return -ENODEV; - } - pci_restore_state(priv->pci_dev); - pci_enable_msi(priv->pci_dev); - - ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED, - DRV_NAME, priv); - if (ret) { - IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq); - goto out_disable_msi; - } - - /* we should be verifying the device is ready to be opened */ - mutex_lock(&priv->mutex); - - memset(&priv->staging_rxon, 0, sizeof(struct iwl4965_rxon_cmd)); - /* fetch ucode file from disk, alloc and copy to bus-master buffers ... - * ucode filename and max sizes are card-specific. */ - - if (!priv->ucode_code.len) { - ret = iwl4965_read_ucode(priv); - if (ret) { - IWL_ERROR("Could not read microcode: %d\n", ret); - mutex_unlock(&priv->mutex); - goto out_release_irq; - } - } - - ret = __iwl4965_up(priv); - - mutex_unlock(&priv->mutex); - - if (ret) - goto out_release_irq; - - IWL_DEBUG_INFO("Start UP work done.\n"); - - if (test_bit(STATUS_IN_SUSPEND, &priv->status)) - return 0; - - /* Wait for START_ALIVE from ucode. Otherwise callbacks from - * mac80211 will not be run successfully. */ - ret = wait_event_interruptible_timeout(priv->wait_command_queue, - test_bit(STATUS_READY, &priv->status), - UCODE_READY_TIMEOUT); - if (!ret) { - if (!test_bit(STATUS_READY, &priv->status)) { - IWL_ERROR("Wait for START_ALIVE timeout after %dms.\n", - jiffies_to_msecs(UCODE_READY_TIMEOUT)); - ret = -ETIMEDOUT; - goto out_release_irq; - } - } - - priv->is_open = 1; - IWL_DEBUG_MAC80211("leave\n"); - return 0; - -out_release_irq: - free_irq(priv->pci_dev->irq, priv); -out_disable_msi: - pci_disable_msi(priv->pci_dev); - pci_disable_device(priv->pci_dev); - priv->is_open = 0; - IWL_DEBUG_MAC80211("leave - failed\n"); - return ret; -} - -static void iwl4965_mac_stop(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("enter\n"); - - if (!priv->is_open) { - IWL_DEBUG_MAC80211("leave - skip\n"); - return; - } - - priv->is_open = 0; - - if (iwl_is_ready_rf(priv)) { - /* stop mac, cancel any scan request and clear - * RXON_FILTER_ASSOC_MSK BIT - */ - mutex_lock(&priv->mutex); - iwl4965_scan_cancel_timeout(priv, 100); - cancel_delayed_work(&priv->post_associate); - mutex_unlock(&priv->mutex); - } - - iwl4965_down(priv); - - flush_workqueue(priv->workqueue); - free_irq(priv->pci_dev->irq, priv); - pci_disable_msi(priv->pci_dev); - pci_save_state(priv->pci_dev); - pci_disable_device(priv->pci_dev); - - IWL_DEBUG_MAC80211("leave\n"); -} - -static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *ctl) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("enter\n"); - - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - IWL_DEBUG_MAC80211("leave - monitor\n"); - dev_kfree_skb_any(skb); - return 0; - } - - IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ctl->tx_rate->bitrate); - - if (iwl4965_tx_skb(priv, skb, ctl)) - dev_kfree_skb_any(skb); - - IWL_DEBUG_MAC80211("leave\n"); - return 0; -} - -static int iwl4965_mac_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_MAC80211("enter: type %d\n", conf->type); - - if (priv->vif) { - IWL_DEBUG_MAC80211("leave - vif != NULL\n"); - return -EOPNOTSUPP; - } - - spin_lock_irqsave(&priv->lock, flags); - priv->vif = conf->vif; - - spin_unlock_irqrestore(&priv->lock, flags); - - mutex_lock(&priv->mutex); - - if (conf->mac_addr) { - IWL_DEBUG_MAC80211("Set %s\n", print_mac(mac, conf->mac_addr)); - memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); - } - - if (iwl_is_ready(priv)) - iwl4965_set_mode(priv, conf->type); - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211("leave\n"); - return 0; -} - -/** - * iwl4965_mac_config - mac80211 config callback - * - * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to - * be set inappropriately and the driver currently sets the hardware up to - * use it whenever needed. - */ -static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - const struct iwl_channel_info *ch_info; - unsigned long flags; - int ret = 0; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); - - priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP); - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_MAC80211("leave - not ready\n"); - ret = -EIO; - goto out; - } - - if (unlikely(!priv->cfg->mod_params->disable_hw_scan && - test_bit(STATUS_SCANNING, &priv->status))) { - IWL_DEBUG_MAC80211("leave - scanning\n"); - set_bit(STATUS_CONF_PENDING, &priv->status); - mutex_unlock(&priv->mutex); - return 0; - } - - spin_lock_irqsave(&priv->lock, flags); - - ch_info = iwl_get_channel_info(priv, conf->channel->band, - ieee80211_frequency_to_channel(conf->channel->center_freq)); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211("leave - invalid channel\n"); - spin_unlock_irqrestore(&priv->lock, flags); - ret = -EINVAL; - goto out; - } - -#ifdef CONFIG_IWL4965_HT - /* if we are switching from ht to 2.4 clear flags - * from any ht related info since 2.4 does not - * support ht */ - if ((le16_to_cpu(priv->staging_rxon.channel) != conf->channel->hw_value) -#ifdef IEEE80211_CONF_CHANNEL_SWITCH - && !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) -#endif - ) - priv->staging_rxon.flags = 0; -#endif /* CONFIG_IWL4965_HT */ - - iwlcore_set_rxon_channel(priv, conf->channel->band, - ieee80211_frequency_to_channel(conf->channel->center_freq)); - - iwl4965_set_flags_for_phymode(priv, conf->channel->band); - - /* The list of supported rates and rate mask can be different - * for each band; since the band may have changed, reset - * the rate mask to what mac80211 lists */ - iwl4965_set_rate(priv); - - spin_unlock_irqrestore(&priv->lock, flags); - -#ifdef IEEE80211_CONF_CHANNEL_SWITCH - if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) { - iwl4965_hw_channel_switch(priv, conf->channel); - goto out; - } -#endif - - if (priv->cfg->ops->lib->radio_kill_sw) - priv->cfg->ops->lib->radio_kill_sw(priv, !conf->radio_enabled); - - if (!conf->radio_enabled) { - IWL_DEBUG_MAC80211("leave - radio disabled\n"); - goto out; - } - - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_MAC80211("leave - RF kill\n"); - ret = -EIO; - goto out; - } - - iwl4965_set_rate(priv); - - if (memcmp(&priv->active_rxon, - &priv->staging_rxon, sizeof(priv->staging_rxon))) - iwl4965_commit_rxon(priv); - else - IWL_DEBUG_INFO("No re-sending same RXON configuration.\n"); - - IWL_DEBUG_MAC80211("leave\n"); - -out: - clear_bit(STATUS_CONF_PENDING, &priv->status); - mutex_unlock(&priv->mutex); - return ret; -} - -static void iwl4965_config_ap(struct iwl_priv *priv) -{ - int ret = 0; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* The following should be done only at AP bring up */ - if ((priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) == 0) { - - /* RXON - unassoc (to set timing command) */ - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - - /* RXON Timing */ - memset(&priv->rxon_timing, 0, sizeof(struct iwl4965_rxon_time_cmd)); - iwl4965_setup_rxon_timing(priv); - ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING, - sizeof(priv->rxon_timing), &priv->rxon_timing); - if (ret) - IWL_WARNING("REPLY_RXON_TIMING failed - " - "Attempting to continue.\n"); - - iwl4965_set_rxon_chain(priv); - - /* FIXME: what should be the assoc_id for AP? */ - priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); - if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE) - priv->staging_rxon.flags |= - RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags &= - ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) { - if (priv->assoc_capability & - WLAN_CAPABILITY_SHORT_SLOT_TIME) - priv->staging_rxon.flags |= - RXON_FLG_SHORT_SLOT_MSK; - else - priv->staging_rxon.flags &= - ~RXON_FLG_SHORT_SLOT_MSK; - - if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) - priv->staging_rxon.flags &= - ~RXON_FLG_SHORT_SLOT_MSK; - } - /* restore RXON assoc */ - priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - iwl4965_activate_qos(priv, 1); - iwl4965_rxon_add_station(priv, iwl4965_broadcast_addr, 0); - } - iwl4965_send_beacon_cmd(priv); - - /* FIXME - we need to add code here to detect a totally new - * configuration, reset the AP, unassoc, rxon timing, assoc, - * clear sta table, add BCAST sta... */ -} - -static int iwl4965_mac_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - DECLARE_MAC_BUF(mac); - unsigned long flags; - int rc; - - if (conf == NULL) - return -EIO; - - if (priv->vif != vif) { - IWL_DEBUG_MAC80211("leave - priv->vif != vif\n"); - return 0; - } - - if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) && - (!conf->beacon || !conf->ssid_len)) { - IWL_DEBUG_MAC80211 - ("Leaving in AP mode because HostAPD is not ready.\n"); - return 0; - } - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - mutex_lock(&priv->mutex); - - if (conf->bssid) - IWL_DEBUG_MAC80211("bssid: %s\n", - print_mac(mac, conf->bssid)); - -/* - * very dubious code was here; the probe filtering flag is never set: - * - if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) && - !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) { - */ - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - if (!conf->bssid) { - conf->bssid = priv->mac_addr; - memcpy(priv->bssid, priv->mac_addr, ETH_ALEN); - IWL_DEBUG_MAC80211("bssid was set to: %s\n", - print_mac(mac, conf->bssid)); - } - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = conf->beacon; - } - - if (iwl_is_rfkill(priv)) - goto done; - - if (conf->bssid && !is_zero_ether_addr(conf->bssid) && - !is_multicast_ether_addr(conf->bssid)) { - /* If there is currently a HW scan going on in the background - * then we need to cancel it else the RXON below will fail. */ - if (iwl4965_scan_cancel_timeout(priv, 100)) { - IWL_WARNING("Aborted scan still in progress " - "after 100ms\n"); - IWL_DEBUG_MAC80211("leaving - scan abort failed.\n"); - mutex_unlock(&priv->mutex); - return -EAGAIN; - } - memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN); - - /* TODO: Audit driver for usage of these members and see - * if mac80211 deprecates them (priv->bssid looks like it - * shouldn't be there, but I haven't scanned the IBSS code - * to verify) - jpk */ - memcpy(priv->bssid, conf->bssid, ETH_ALEN); - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) - iwl4965_config_ap(priv); - else { - rc = iwl4965_commit_rxon(priv); - if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc) - iwl4965_rxon_add_station( - priv, priv->active_rxon.bssid_addr, 1); - } - - } else { - iwl4965_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - } - - done: - spin_lock_irqsave(&priv->lock, flags); - if (!conf->ssid_len) - memset(priv->essid, 0, IW_ESSID_MAX_SIZE); - else - memcpy(priv->essid, conf->ssid, conf->ssid_len); - - priv->essid_len = conf->ssid_len; - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_MAC80211("leave\n"); - mutex_unlock(&priv->mutex); - - return 0; -} - -static void iwl4965_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, struct dev_addr_list *mc_list) -{ - /* - * XXX: dummy - * see also iwl4965_connection_init_rx_config - */ - *total_flags = 0; -} - -static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("enter\n"); - - mutex_lock(&priv->mutex); - - if (iwl_is_ready_rf(priv)) { - iwl4965_scan_cancel_timeout(priv, 100); - cancel_delayed_work(&priv->post_associate); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - } - if (priv->vif == conf->vif) { - priv->vif = NULL; - memset(priv->bssid, 0, ETH_ALEN); - memset(priv->essid, 0, IW_ESSID_MAX_SIZE); - priv->essid_len = 0; - } - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211("leave\n"); - -} - - -#ifdef CONFIG_IWL4965_HT -static void iwl4965_ht_conf(struct iwl_priv *priv, - struct ieee80211_bss_conf *bss_conf) -{ - struct ieee80211_ht_info *ht_conf = bss_conf->ht_conf; - struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf; - struct iwl_ht_info *iwl_conf = &priv->current_ht_config; - - IWL_DEBUG_MAC80211("enter: \n"); - - iwl_conf->is_ht = bss_conf->assoc_ht; - - if (!iwl_conf->is_ht) - return; - - priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); - - if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20) - iwl_conf->sgf |= 0x1; - if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40) - iwl_conf->sgf |= 0x2; - - iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD); - iwl_conf->max_amsdu_size = - !!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU); - - iwl_conf->supported_chan_width = - !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH); - iwl_conf->extension_chan_offset = - ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET; - /* If no above or below channel supplied disable FAT channel */ - if (iwl_conf->extension_chan_offset != IWL_EXT_CHANNEL_OFFSET_ABOVE && - iwl_conf->extension_chan_offset != IWL_EXT_CHANNEL_OFFSET_BELOW) - iwl_conf->supported_chan_width = 0; - - iwl_conf->tx_mimo_ps_mode = - (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); - memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); - - iwl_conf->control_channel = ht_bss_conf->primary_channel; - iwl_conf->tx_chan_width = - !!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH); - iwl_conf->ht_protection = - ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION; - iwl_conf->non_GF_STA_present = - !!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT); - - IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel); - IWL_DEBUG_MAC80211("leave\n"); -} -#else -static inline void iwl4965_ht_conf(struct iwl_priv *priv, - struct ieee80211_bss_conf *bss_conf) -{ -} -#endif - -#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) -static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("changes = 0x%X\n", changes); - - if (changes & BSS_CHANGED_ERP_PREAMBLE) { - IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n", - bss_conf->use_short_preamble); - if (bss_conf->use_short_preamble) - priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - } - - if (changes & BSS_CHANGED_ERP_CTS_PROT) { - IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot); - if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) - priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK; - else - priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; - } - - if (changes & BSS_CHANGED_HT) { - IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht); - iwl4965_ht_conf(priv, bss_conf); - iwl4965_set_rxon_chain(priv); - } - - if (changes & BSS_CHANGED_ASSOC) { - IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc); - /* This should never happen as this function should - * never be called from interrupt context. */ - if (WARN_ON_ONCE(in_interrupt())) - return; - if (bss_conf->assoc) { - priv->assoc_id = bss_conf->aid; - priv->beacon_int = bss_conf->beacon_int; - priv->timestamp = bss_conf->timestamp; - priv->assoc_capability = bss_conf->assoc_capability; - priv->next_scan_jiffies = jiffies + - IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; - mutex_lock(&priv->mutex); - iwl4965_post_associate(priv); - mutex_unlock(&priv->mutex); - } else { - priv->assoc_id = 0; - IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc); - } - } else if (changes && iwl_is_associated(priv) && priv->assoc_id) { - IWL_DEBUG_MAC80211("Associated Changes %d\n", changes); - iwl_send_rxon_assoc(priv); - } - -} - -static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) -{ - int rc = 0; - unsigned long flags; - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211("enter\n"); - - mutex_lock(&priv->mutex); - spin_lock_irqsave(&priv->lock, flags); - - if (!iwl_is_ready_rf(priv)) { - rc = -EIO; - IWL_DEBUG_MAC80211("leave - not ready or exit pending\n"); - goto out_unlock; - } - - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */ - rc = -EIO; - IWL_ERROR("ERROR: APs don't scan\n"); - goto out_unlock; - } - - /* we don't schedule scan within next_scan_jiffies period */ - if (priv->next_scan_jiffies && - time_after(priv->next_scan_jiffies, jiffies)) { - rc = -EAGAIN; - goto out_unlock; - } - /* if we just finished scan ask for delay */ - if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies + - IWL_DELAY_NEXT_SCAN, jiffies)) { - rc = -EAGAIN; - goto out_unlock; - } - if (len) { - IWL_DEBUG_SCAN("direct scan for %s [%d]\n ", - iwl4965_escape_essid(ssid, len), (int)len); - - priv->one_direct_scan = 1; - priv->direct_ssid_len = (u8) - min((u8) len, (u8) IW_ESSID_MAX_SIZE); - memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len); - } else - priv->one_direct_scan = 0; - - rc = iwl4965_scan_initiate(priv); - - IWL_DEBUG_MAC80211("leave\n"); - -out_unlock: - spin_unlock_irqrestore(&priv->lock, flags); - mutex_unlock(&priv->mutex); - - return rc; -} - -static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, - struct ieee80211_key_conf *keyconf, const u8 *addr, - u32 iv32, u16 *phase1key) -{ - struct iwl_priv *priv = hw->priv; - u8 sta_id = IWL_INVALID_STATION; - unsigned long flags; - __le16 key_flags = 0; - int i; - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_MAC80211("enter\n"); - - sta_id = iwl4965_hw_find_station(priv, addr); - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_MAC80211("leave - %s not in station map.\n", - print_mac(mac, addr)); - return; - } - - iwl4965_scan_cancel_timeout(priv, 100); - - key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (sta_id == priv->hw_params.bcast_sta_id) - key_flags |= STA_KEY_MULTICAST_MSK; - - spin_lock_irqsave(&priv->sta_lock, flags); - - priv->stations[sta_id].sta.key.key_flags = key_flags; - priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; - - for (i = 0; i < 5; i++) - priv->stations[sta_id].sta.key.tkip_rx_ttak[i] = - cpu_to_le16(phase1key[i]); - - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - - iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC); - - spin_unlock_irqrestore(&priv->sta_lock, flags); - - IWL_DEBUG_MAC80211("leave\n"); -} - -static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_addr, const u8 *addr, - struct ieee80211_key_conf *key) -{ - struct iwl_priv *priv = hw->priv; - DECLARE_MAC_BUF(mac); - int ret = 0; - u8 sta_id = IWL_INVALID_STATION; - u8 is_default_wep_key = 0; - - IWL_DEBUG_MAC80211("enter\n"); - - if (priv->cfg->mod_params->sw_crypto) { - IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n"); - return -EOPNOTSUPP; - } - - if (is_zero_ether_addr(addr)) - /* only support pairwise keys */ - return -EOPNOTSUPP; - - sta_id = iwl4965_hw_find_station(priv, addr); - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_MAC80211("leave - %s not in station map.\n", - print_mac(mac, addr)); - return -EINVAL; - - } - - mutex_lock(&priv->mutex); - iwl4965_scan_cancel_timeout(priv, 100); - mutex_unlock(&priv->mutex); - - /* If we are getting WEP group key and we didn't receive any key mapping - * so far, we are in legacy wep mode (group key only), otherwise we are - * in 1X mode. - * In legacy wep mode, we use another host command to the uCode */ - if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id && - priv->iw_mode != IEEE80211_IF_TYPE_AP) { - if (cmd == SET_KEY) - is_default_wep_key = !priv->key_mapping_key; - else - is_default_wep_key = priv->default_wep_key; - } - - switch (cmd) { - case SET_KEY: - if (is_default_wep_key) - ret = iwl_set_default_wep_key(priv, key); - else - ret = iwl_set_dynamic_key(priv, key, sta_id); - - IWL_DEBUG_MAC80211("enable hwcrypto key\n"); - break; - case DISABLE_KEY: - if (is_default_wep_key) - ret = iwl_remove_default_wep_key(priv, key); - else - ret = iwl_remove_dynamic_key(priv, sta_id); - - IWL_DEBUG_MAC80211("disable hwcrypto key\n"); - break; - default: - ret = -EINVAL; - } - - IWL_DEBUG_MAC80211("leave\n"); - - return ret; -} - -static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, int queue, - const struct ieee80211_tx_queue_params *params) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - int q; - - IWL_DEBUG_MAC80211("enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - RF not ready\n"); - return -EIO; - } - - if (queue >= AC_NUM) { - IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue); - return 0; - } - - if (!priv->qos_data.qos_enable) { - priv->qos_data.qos_active = 0; - IWL_DEBUG_MAC80211("leave - qos not enabled\n"); - return 0; - } - q = AC_NUM - 1 - queue; - - spin_lock_irqsave(&priv->lock, flags); - - priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min); - priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max); - priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; - priv->qos_data.def_qos_parm.ac[q].edca_txop = - cpu_to_le16((params->txop * 32)); - - priv->qos_data.def_qos_parm.ac[q].reserved1 = 0; - priv->qos_data.qos_active = 1; - - spin_unlock_irqrestore(&priv->lock, flags); - - mutex_lock(&priv->mutex); - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) - iwl4965_activate_qos(priv, 1); - else if (priv->assoc_id && iwl_is_associated(priv)) - iwl4965_activate_qos(priv, 0); - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211("leave\n"); - return 0; -} - -static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw, - struct ieee80211_tx_queue_stats *stats) -{ - struct iwl_priv *priv = hw->priv; - int i, avail; - struct iwl4965_tx_queue *txq; - struct iwl4965_queue *q; - unsigned long flags; - - IWL_DEBUG_MAC80211("enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - RF not ready\n"); - return -EIO; - } - - spin_lock_irqsave(&priv->lock, flags); - - for (i = 0; i < AC_NUM; i++) { - txq = &priv->txq[i]; - q = &txq->q; - avail = iwl4965_queue_space(q); - - stats->data[i].len = q->n_window - avail; - stats->data[i].limit = q->n_window - q->high_mark; - stats->data[i].count = q->n_window; - - } - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_MAC80211("leave\n"); - - return 0; -} - -static int iwl4965_mac_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats) -{ - IWL_DEBUG_MAC80211("enter\n"); - IWL_DEBUG_MAC80211("leave\n"); - - return 0; -} - -static u64 iwl4965_mac_get_tsf(struct ieee80211_hw *hw) -{ - IWL_DEBUG_MAC80211("enter\n"); - IWL_DEBUG_MAC80211("leave\n"); - - return 0; -} - -static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211("enter\n"); - - priv->lq_mngr.lq_ready = 0; -#ifdef CONFIG_IWL4965_HT - spin_lock_irqsave(&priv->lock, flags); - memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info)); - spin_unlock_irqrestore(&priv->lock, flags); -#endif /* CONFIG_IWL4965_HT */ - - iwlcore_reset_qos(priv); - - cancel_delayed_work(&priv->post_associate); - - spin_lock_irqsave(&priv->lock, flags); - priv->assoc_id = 0; - priv->assoc_capability = 0; - priv->assoc_station_added = 0; - - /* new association get rid of ibss beacon skb */ - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = NULL; - - priv->beacon_int = priv->hw->conf.beacon_int; - priv->timestamp = 0; - if ((priv->iw_mode == IEEE80211_IF_TYPE_STA)) - priv->beacon_int = 0; - - spin_unlock_irqrestore(&priv->lock, flags); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - not ready\n"); - mutex_unlock(&priv->mutex); - return; - } - - /* we are restarting association process - * clear RXON_FILTER_ASSOC_MSK bit - */ - if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { - iwl4965_scan_cancel_timeout(priv, 100); - priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl4965_commit_rxon(priv); - } - - /* Per mac80211.h: This is only used in IBSS mode... */ - if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { - - IWL_DEBUG_MAC80211("leave - not in IBSS\n"); - mutex_unlock(&priv->mutex); - return; - } - - iwl4965_set_rate(priv); - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211("leave\n"); -} - -static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211("enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211("leave - RF not ready\n"); - mutex_unlock(&priv->mutex); - return -EIO; - } - - if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { - IWL_DEBUG_MAC80211("leave - not IBSS\n"); - mutex_unlock(&priv->mutex); - return -EIO; - } - - spin_lock_irqsave(&priv->lock, flags); - - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - priv->ibss_beacon = skb; - - priv->assoc_id = 0; - - IWL_DEBUG_MAC80211("leave\n"); - spin_unlock_irqrestore(&priv->lock, flags); - - iwlcore_reset_qos(priv); - - queue_work(priv->workqueue, &priv->post_associate); - - mutex_unlock(&priv->mutex); - - return 0; -} - -/***************************************************************************** - * - * sysfs attributes - * - *****************************************************************************/ - -#ifdef CONFIG_IWLWIFI_DEBUG - -/* - * The following adds a new attribute to the sysfs representation - * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) - * used for controlling the debug level. - * - * See the level definitions in iwl for details. - */ - -static ssize_t show_debug_level(struct device_driver *d, char *buf) -{ - return sprintf(buf, "0x%08X\n", iwl_debug_level); -} -static ssize_t store_debug_level(struct device_driver *d, - const char *buf, size_t count) -{ - char *p = (char *)buf; - u32 val; - - val = simple_strtoul(p, &p, 0); - if (p == buf) - printk(KERN_INFO DRV_NAME - ": %s is not in hex or decimal form.\n", buf); - else - iwl_debug_level = val; - - return strnlen(buf, count); -} - -static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, - show_debug_level, store_debug_level); - -#endif /* CONFIG_IWLWIFI_DEBUG */ - - -static ssize_t show_temperature(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", iwl4965_hw_get_temperature(priv)); -} - -static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); - -static ssize_t show_rs_window(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct iwl_priv *priv = d->driver_data; - return iwl4965_fill_rs_info(priv->hw, buf, IWL_AP_ID); -} -static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL); - -static ssize_t show_tx_power(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - return sprintf(buf, "%d\n", priv->user_txpower_limit); -} - -static ssize_t store_tx_power(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - char *p = (char *)buf; - u32 val; - - val = simple_strtoul(p, &p, 10); - if (p == buf) - printk(KERN_INFO DRV_NAME - ": %s is not in decimal form.\n", buf); - else - iwl4965_hw_reg_set_txpower(priv, val); - - return count; -} - -static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); - -static ssize_t show_flags(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - - return sprintf(buf, "0x%04X\n", priv->active_rxon.flags); -} - -static ssize_t store_flags(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - u32 flags = simple_strtoul(buf, NULL, 0); - - mutex_lock(&priv->mutex); - if (le32_to_cpu(priv->staging_rxon.flags) != flags) { - /* Cancel any currently running scans... */ - if (iwl4965_scan_cancel_timeout(priv, 100)) - IWL_WARNING("Could not cancel scan.\n"); - else { - IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n", - flags); - priv->staging_rxon.flags = cpu_to_le32(flags); - iwl4965_commit_rxon(priv); - } - } - mutex_unlock(&priv->mutex); - - return count; -} - -static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); - -static ssize_t show_filter_flags(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - - return sprintf(buf, "0x%04X\n", - le32_to_cpu(priv->active_rxon.filter_flags)); -} - -static ssize_t store_filter_flags(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - u32 filter_flags = simple_strtoul(buf, NULL, 0); - - mutex_lock(&priv->mutex); - if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) { - /* Cancel any currently running scans... */ - if (iwl4965_scan_cancel_timeout(priv, 100)) - IWL_WARNING("Could not cancel scan.\n"); - else { - IWL_DEBUG_INFO("Committing rxon.filter_flags = " - "0x%04X\n", filter_flags); - priv->staging_rxon.filter_flags = - cpu_to_le32(filter_flags); - iwl4965_commit_rxon(priv); - } - } - mutex_unlock(&priv->mutex); - - return count; -} - -static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, - store_filter_flags); - -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - -static ssize_t show_measurement(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl4965_spectrum_notification measure_report; - u32 size = sizeof(measure_report), len = 0, ofs = 0; - u8 *data = (u8 *) & measure_report; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (!(priv->measurement_status & MEASUREMENT_READY)) { - spin_unlock_irqrestore(&priv->lock, flags); - return 0; - } - memcpy(&measure_report, &priv->measure_report, size); - priv->measurement_status = 0; - spin_unlock_irqrestore(&priv->lock, flags); - - while (size && (PAGE_SIZE - len)) { - hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, - PAGE_SIZE - len, 1); - len = strlen(buf); - if (PAGE_SIZE - len) - buf[len++] = '\n'; - - ofs += 16; - size -= min(size, 16U); - } - - return len; -} - -static ssize_t store_measurement(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct ieee80211_measurement_params params = { - .channel = le16_to_cpu(priv->active_rxon.channel), - .start_time = cpu_to_le64(priv->last_tsf), - .duration = cpu_to_le16(1), - }; - u8 type = IWL_MEASURE_BASIC; - u8 buffer[32]; - u8 channel; - - if (count) { - char *p = buffer; - strncpy(buffer, buf, min(sizeof(buffer), count)); - channel = simple_strtoul(p, NULL, 0); - if (channel) - params.channel = channel; - - p = buffer; - while (*p && *p != ' ') - p++; - if (*p) - type = simple_strtoul(p + 1, NULL, 0); - } - - IWL_DEBUG_INFO("Invoking measurement of type %d on " - "channel %d (for '%s')\n", type, params.channel, buf); - iwl4965_get_measurement(priv, ¶ms, type); - - return count; -} - -static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, - show_measurement, store_measurement); -#endif /* CONFIG_IWL4965_SPECTRUM_MEASUREMENT */ - -static ssize_t store_retry_rate(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - priv->retry_rate = simple_strtoul(buf, NULL, 0); - if (priv->retry_rate <= 0) - priv->retry_rate = 1; - - return count; -} - -static ssize_t show_retry_rate(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "%d", priv->retry_rate); -} - -static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate, - store_retry_rate); - -static ssize_t store_power_level(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - int rc; - int mode; - - mode = simple_strtoul(buf, NULL, 0); - mutex_lock(&priv->mutex); - - if (!iwl_is_ready(priv)) { - rc = -EAGAIN; - goto out; - } - - if ((mode < 1) || (mode > IWL_POWER_LIMIT) || (mode == IWL_POWER_AC)) - mode = IWL_POWER_AC; - else - mode |= IWL_POWER_ENABLED; - - if (mode != priv->power_mode) { - rc = iwl4965_send_power_mode(priv, IWL_POWER_LEVEL(mode)); - if (rc) { - IWL_DEBUG_MAC80211("failed setting power mode.\n"); - goto out; - } - priv->power_mode = mode; - } - - rc = count; - - out: - mutex_unlock(&priv->mutex); - return rc; -} - -#define MAX_WX_STRING 80 - -/* Values are in microsecond */ -static const s32 timeout_duration[] = { - 350000, - 250000, - 75000, - 37000, - 25000, -}; -static const s32 period_duration[] = { - 400000, - 700000, - 1000000, - 1000000, - 1000000 -}; - -static ssize_t show_power_level(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - int level = IWL_POWER_LEVEL(priv->power_mode); - char *p = buf; - - p += sprintf(p, "%d ", level); - switch (level) { - case IWL_POWER_MODE_CAM: - case IWL_POWER_AC: - p += sprintf(p, "(AC)"); - break; - case IWL_POWER_BATTERY: - p += sprintf(p, "(BATTERY)"); - break; - default: - p += sprintf(p, - "(Timeout %dms, Period %dms)", - timeout_duration[level - 1] / 1000, - period_duration[level - 1] / 1000); - } - - if (!(priv->power_mode & IWL_POWER_ENABLED)) - p += sprintf(p, " OFF\n"); - else - p += sprintf(p, " \n"); - - return (p - buf + 1); - -} - -static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level, - store_power_level); - -static ssize_t show_channels(struct device *d, - struct device_attribute *attr, char *buf) -{ - /* all this shit doesn't belong into sysfs anyway */ - return 0; -} - -static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL); - -static ssize_t show_statistics(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - u32 size = sizeof(struct iwl4965_notif_statistics); - u32 len = 0, ofs = 0; - u8 *data = (u8 *) & priv->statistics; - int rc = 0; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - mutex_lock(&priv->mutex); - rc = iwl_send_statistics_request(priv, 0); - mutex_unlock(&priv->mutex); - - if (rc) { - len = sprintf(buf, - "Error sending statistics request: 0x%08X\n", rc); - return len; - } - - while (size && (PAGE_SIZE - len)) { - hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, - PAGE_SIZE - len, 1); - len = strlen(buf); - if (PAGE_SIZE - len) - buf[len++] = '\n'; - - ofs += 16; - size -= min(size, 16U); - } - - return len; -} - -static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL); - -static ssize_t show_antenna(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", priv->antenna); -} - -static ssize_t store_antenna(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - int ant; - struct iwl_priv *priv = dev_get_drvdata(d); - - if (count == 0) - return 0; - - if (sscanf(buf, "%1i", &ant) != 1) { - IWL_DEBUG_INFO("not in hex or decimal form.\n"); - return count; - } - - if ((ant >= 0) && (ant <= 2)) { - IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant); - priv->antenna = (enum iwl4965_antenna)ant; - } else - IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant); - - - return count; -} - -static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna); - -static ssize_t show_status(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = (struct iwl_priv *)d->driver_data; - if (!iwl_is_alive(priv)) - return -EAGAIN; - return sprintf(buf, "0x%08x\n", (int)priv->status); -} - -static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); - -static ssize_t dump_error_log(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - char *p = (char *)buf; - - if (p[0] == '1') - iwl4965_dump_nic_error_log((struct iwl_priv *)d->driver_data); - - return strnlen(buf, count); -} - -static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log); - -static ssize_t dump_event_log(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - char *p = (char *)buf; - - if (p[0] == '1') - iwl4965_dump_nic_event_log((struct iwl_priv *)d->driver_data); - - return strnlen(buf, count); -} - -static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log); - -/***************************************************************************** - * - * driver setup and teardown - * - *****************************************************************************/ - -static void iwl4965_setup_deferred_work(struct iwl_priv *priv) -{ - priv->workqueue = create_workqueue(DRV_NAME); - - init_waitqueue_head(&priv->wait_command_queue); - - INIT_WORK(&priv->up, iwl4965_bg_up, priv); - INIT_WORK(&priv->restart, iwl4965_bg_restart, priv); - INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish, priv); - INIT_WORK(&priv->scan_completed, iwl4965_bg_scan_completed, priv); - INIT_WORK(&priv->request_scan, iwl4965_bg_request_scan, priv); - INIT_WORK(&priv->abort_scan, iwl4965_bg_abort_scan, priv); - INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill, priv); - INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update, priv); - INIT_WORK(&priv->post_associate, iwl4965_bg_post_associate, priv); - INIT_WORK(&priv->init_alive_start, iwl4965_bg_init_alive_start, priv); - INIT_WORK(&priv->alive_start, iwl4965_bg_alive_start, priv); - INIT_WORK(&priv->scan_check, iwl4965_bg_scan_check, priv); - - iwl4965_hw_setup_deferred_work(priv); - - tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) - iwl4965_irq_tasklet, (unsigned long)priv); -} - -static void iwl4965_cancel_deferred_work(struct iwl_priv *priv) -{ - iwl4965_hw_cancel_deferred_work(priv); - -#if 0 /* Not in RHEL5...(and probably wrong upstream...) */ - cancel_delayed_work_sync(&priv->init_alive_start); -#else - cancel_delayed_work(&priv->init_alive_start); - /* Make sure he has completed, since he can schedule other work */ - flush_workqueue(priv->workqueue); -#endif - cancel_delayed_work(&priv->scan_check); - cancel_delayed_work(&priv->alive_start); - cancel_delayed_work(&priv->post_associate); -#if 0 /* Not in RHEL5... */ - cancel_work_sync(&priv->beacon_update); -#else - flush_workqueue(priv->workqueue); -#endif -} - -static struct attribute *iwl4965_sysfs_entries[] = { - &dev_attr_antenna.attr, - &dev_attr_channels.attr, - &dev_attr_dump_errors.attr, - &dev_attr_dump_events.attr, - &dev_attr_flags.attr, - &dev_attr_filter_flags.attr, -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - &dev_attr_measurement.attr, -#endif - &dev_attr_power_level.attr, - &dev_attr_retry_rate.attr, - &dev_attr_rs_window.attr, - &dev_attr_statistics.attr, - &dev_attr_status.attr, - &dev_attr_temperature.attr, - &dev_attr_tx_power.attr, - - NULL -}; - -static struct attribute_group iwl4965_attribute_group = { - .name = NULL, /* put in device directory */ - .attrs = iwl4965_sysfs_entries, -}; - -static struct ieee80211_ops iwl4965_hw_ops = { - .tx = iwl4965_mac_tx, - .start = iwl4965_mac_start, - .stop = iwl4965_mac_stop, - .add_interface = iwl4965_mac_add_interface, - .remove_interface = iwl4965_mac_remove_interface, - .config = iwl4965_mac_config, - .config_interface = iwl4965_mac_config_interface, - .configure_filter = iwl4965_configure_filter, - .set_key = iwl4965_mac_set_key, - .update_tkip_key = iwl4965_mac_update_tkip_key, - .get_stats = iwl4965_mac_get_stats, - .get_tx_stats = iwl4965_mac_get_tx_stats, - .conf_tx = iwl4965_mac_conf_tx, - .get_tsf = iwl4965_mac_get_tsf, - .reset_tsf = iwl4965_mac_reset_tsf, - .beacon_update = iwl4965_mac_beacon_update, - .bss_info_changed = iwl4965_bss_info_changed, -#ifdef CONFIG_IWL4965_HT - .ampdu_action = iwl4965_mac_ampdu_action, -#endif /* CONFIG_IWL4965_HT */ - .hw_scan = iwl4965_mac_hw_scan -}; - -static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int err = 0; - struct iwl_priv *priv; - struct ieee80211_hw *hw; - struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); - unsigned long flags; - DECLARE_MAC_BUF(mac); - - /************************ - * 1. Allocating HW data - ************************/ - - /* Disabling hardware scan means that mac80211 will perform scans - * "the hard way", rather than using device's scan. */ - if (cfg->mod_params->disable_hw_scan) { - IWL_DEBUG_INFO("Disabling hw_scan\n"); - iwl4965_hw_ops.hw_scan = NULL; - } - - hw = iwl_alloc_all(cfg, &iwl4965_hw_ops); - if (!hw) { - err = -ENOMEM; - goto out; - } - priv = hw->priv; - /* At this point both hw and priv are allocated. */ - - SET_IEEE80211_DEV(hw, &pdev->dev); - - IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); - priv->cfg = cfg; - priv->pci_dev = pdev; - -#ifdef CONFIG_IWLWIFI_DEBUG - iwl_debug_level = priv->cfg->mod_params->debug; - atomic_set(&priv->restrict_refcnt, 0); -#endif - - /************************** - * 2. Initializing PCI bus - **************************/ - if (pci_enable_device(pdev)) { - err = -ENODEV; - goto out_ieee80211_free_hw; - } - - pci_set_master(pdev); - - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (err) { - printk(KERN_WARNING DRV_NAME - ": No suitable DMA available.\n"); - goto out_pci_disable_device; - } - - err = pci_request_regions(pdev, DRV_NAME); - if (err) - goto out_pci_disable_device; - - pci_set_drvdata(pdev, priv); - - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, 0x41, 0x00); - - /*********************** - * 3. Read REV register - ***********************/ - priv->hw_base = pci_iomap(pdev, 0, 0); - if (!priv->hw_base) { - err = -ENODEV; - goto out_pci_release_regions; - } - - IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n", - (unsigned long long) pci_resource_len(pdev, 0)); - IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base); - - printk(KERN_INFO DRV_NAME - ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name); - - /***************** - * 4. Read EEPROM - *****************/ - /* nic init */ - iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - err = iwl_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (err < 0) { - IWL_DEBUG_INFO("Failed to init the card\n"); - goto out_iounmap; - } - /* Read the EEPROM */ - err = iwl_eeprom_init(priv); - if (err) { - IWL_ERROR("Unable to init EEPROM\n"); - goto out_iounmap; - } - /* MAC Address location in EEPROM same for 3945/4965 */ - iwl_eeprom_get_mac(priv, priv->mac_addr); - IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr)); - SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - - /************************ - * 5. Setup HW constants - ************************/ - /* Device-specific setup */ - if (priv->cfg->ops->lib->set_hw_params(priv)) { - IWL_ERROR("failed to set hw parameters\n"); - goto out_iounmap; - } - - /******************* - * 6. Setup hw/priv - *******************/ - - err = iwl_setup(priv); - if (err) - goto out_unset_hw_params; - /* At this point both hw and priv are initialized. */ - - /********************************** - * 7. Initialize module parameters - **********************************/ - - /* Disable radio (SW RF KILL) via parameter when loading driver */ - if (priv->cfg->mod_params->disable) { - set_bit(STATUS_RF_KILL_SW, &priv->status); - IWL_DEBUG_INFO("Radio disabled.\n"); - } - - if (priv->cfg->mod_params->enable_qos) - priv->qos_data.qos_enable = 1; - - /******************** - * 8. Setup services - ********************/ - spin_lock_irqsave(&priv->lock, flags); - iwl4965_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - err = sysfs_create_group(&pdev->dev.kobj, &iwl4965_attribute_group); - if (err) { - IWL_ERROR("failed to create sysfs device attributes\n"); - goto out_unset_hw_params; - } - - err = iwl_dbgfs_register(priv, DRV_NAME); - if (err) { - IWL_ERROR("failed to create debugfs files\n"); - goto out_remove_sysfs; - } - - iwl4965_setup_deferred_work(priv); - iwl4965_setup_rx_handlers(priv); - - /******************** - * 9. Conclude - ********************/ - pci_save_state(pdev); - pci_disable_device(pdev); - - /* notify iwlcore to init */ - iwlcore_low_level_notify(priv, IWLCORE_INIT_EVT); - return 0; - - out_remove_sysfs: - sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); - out_unset_hw_params: - iwl4965_unset_hw_params(priv); - out_iounmap: - pci_iounmap(pdev, priv->hw_base); - out_pci_release_regions: - pci_release_regions(pdev); - pci_set_drvdata(pdev, NULL); - out_pci_disable_device: - pci_disable_device(pdev); - out_ieee80211_free_hw: - ieee80211_free_hw(priv->hw); - out: - return err; -} - -static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - struct list_head *p, *q; - int i; - unsigned long flags; - - if (!priv) - return; - - IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n"); - - if (priv->mac80211_registered) { - ieee80211_unregister_hw(priv->hw); - priv->mac80211_registered = 0; - } - - set_bit(STATUS_EXIT_PENDING, &priv->status); - - iwl4965_down(priv); - - /* make sure we flush any pending irq or - * tasklet for the driver - */ - spin_lock_irqsave(&priv->lock, flags); - iwl4965_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_synchronize_irq(priv); - - /* Free MAC hash list for ADHOC */ - for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) { - list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) { - list_del(p); - kfree(list_entry(p, struct iwl4965_ibss_seq, list)); - } - } - - iwlcore_low_level_notify(priv, IWLCORE_REMOVE_EVT); - iwl_dbgfs_unregister(priv); - sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); - - iwl4965_dealloc_ucode_pci(priv); - - if (priv->rxq.bd) - iwl4965_rx_queue_free(priv, &priv->rxq); - iwl4965_hw_txq_ctx_free(priv); - - iwl4965_unset_hw_params(priv); - iwlcore_clear_stations_table(priv); - - - /*netif_stop_queue(dev); */ - flush_workqueue(priv->workqueue); - - /* ieee80211_unregister_hw calls iwl4965_mac_stop, which flushes - * priv->workqueue... so we can't take down the workqueue - * until now... */ - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - - pci_iounmap(pdev, priv->hw_base); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - - iwl_free_channel_map(priv); - iwl4965_free_geos(priv); - - if (priv->ibss_beacon) - dev_kfree_skb(priv->ibss_beacon); - - ieee80211_free_hw(priv->hw); -} - -#ifdef CONFIG_PM - -static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - - if (priv->is_open) { - set_bit(STATUS_IN_SUSPEND, &priv->status); - iwl4965_mac_stop(priv->hw); - priv->is_open = 1; - } - - pci_set_power_state(pdev, PCI_D3hot); - - return 0; -} - -static int iwl4965_pci_resume(struct pci_dev *pdev) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - - pci_set_power_state(pdev, PCI_D0); - - if (priv->is_open) - iwl4965_mac_start(priv->hw); - - clear_bit(STATUS_IN_SUSPEND, &priv->status); - return 0; -} - -#endif /* CONFIG_PM */ - -/***************************************************************************** - * - * driver and module entry point - * - *****************************************************************************/ - -/* Hardware specific file defines the PCI IDs table for that hardware module */ -static struct pci_device_id iwl_hw_card_ids[] = { - {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)}, - {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)}, - {0} -}; -MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); - -static struct pci_driver iwl_driver = { - .name = DRV_NAME, - .id_table = iwl_hw_card_ids, - .probe = iwl4965_pci_probe, - .remove = __devexit_p(iwl4965_pci_remove), -#ifdef CONFIG_PM - .suspend = iwl4965_pci_suspend, - .resume = iwl4965_pci_resume, -#endif -}; - -static int __init iwl4965_init(void) -{ - - int ret; - printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); - printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); - - ret = iwl4965_rate_control_register(); - if (ret) { - IWL_ERROR("Unable to register rate control algorithm: %d\n", ret); - return ret; - } - - ret = pci_register_driver(&iwl_driver); - if (ret) { - IWL_ERROR("Unable to initialize PCI module\n"); - goto error_register; - } -#ifdef CONFIG_IWLWIFI_DEBUG - ret = driver_create_file(&iwl_driver.driver, &driver_attr_debug_level); - if (ret) { - IWL_ERROR("Unable to create driver sysfs file\n"); - goto error_debug; - } -#endif - - return ret; - -#ifdef CONFIG_IWLWIFI_DEBUG -error_debug: - pci_unregister_driver(&iwl_driver); -#endif -error_register: - iwl4965_rate_control_unregister(); - return ret; -} - -static void __exit iwl4965_exit(void) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - driver_remove_file(&iwl_driver.driver, &driver_attr_debug_level); -#endif - pci_unregister_driver(&iwl_driver); - iwl4965_rate_control_unregister(); -} - -module_exit(iwl4965_exit); -module_init(iwl4965_init); diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 0b5e03e..70d92c9 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -109,6 +109,355 @@ struct ieee80211_hdr { u8 addr4[6]; } __attribute__ ((packed)); +/** + * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_tods(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_TODS)) != 0; +} + +/** + * ieee80211_has_fromds - check if IEEE80211_FCTL_FROMDS is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_fromds(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FROMDS)) != 0; +} + +/** + * ieee80211_has_a4 - check if IEEE80211_FCTL_TODS and IEEE80211_FCTL_FROMDS are set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_a4(__le16 fc) +{ + __le16 tmp = cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS); + return (fc & tmp) == tmp; +} + +/** + * ieee80211_has_morefrags - check if IEEE80211_FCTL_MOREFRAGS is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_morefrags(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) != 0; +} + +/** + * ieee80211_has_retry - check if IEEE80211_FCTL_RETRY is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_retry(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_RETRY)) != 0; +} + +/** + * ieee80211_has_pm - check if IEEE80211_FCTL_PM is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_pm(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_PM)) != 0; +} + +/** + * ieee80211_has_moredata - check if IEEE80211_FCTL_MOREDATA is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_moredata(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) != 0; +} + +/** + * ieee80211_has_protected - check if IEEE80211_FCTL_PROTECTED is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_protected(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_PROTECTED)) != 0; +} + +/** + * ieee80211_has_order - check if IEEE80211_FCTL_ORDER is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_order(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_ORDER)) != 0; +} + +/** + * ieee80211_is_mgmt - check if type is IEEE80211_FTYPE_MGMT + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_mgmt(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT); +} + +/** + * ieee80211_is_ctl - check if type is IEEE80211_FTYPE_CTL + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_ctl(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL); +} + +/** + * ieee80211_is_data - check if type is IEEE80211_FTYPE_DATA + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_data(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == + cpu_to_le16(IEEE80211_FTYPE_DATA); +} + +/** + * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_data_qos(__le16 fc) +{ + /* + * mask with QOS_DATA rather than IEEE80211_FCTL_STYPE as we just need + * to check the one bit + */ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_STYPE_QOS_DATA)) == + cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA); +} + +/** + * ieee80211_is_data_present - check if type is IEEE80211_FTYPE_DATA and has data + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_data_present(__le16 fc) +{ + /* + * mask with 0x40 and test that that bit is clear to only return true + * for the data-containing substypes. + */ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) == + cpu_to_le16(IEEE80211_FTYPE_DATA); +} + +/** + * ieee80211_is_assoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_REQ + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_assoc_req(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ); +} + +/** + * ieee80211_is_assoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_RESP + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_assoc_resp(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_RESP); +} + +/** + * ieee80211_is_reassoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_REQ + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_reassoc_req(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ); +} + +/** + * ieee80211_is_reassoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_RESP + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_reassoc_resp(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_RESP); +} + +/** + * ieee80211_is_probe_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_REQ + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_probe_req(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ); +} + +/** + * ieee80211_is_probe_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_RESP + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_probe_resp(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP); +} + +/** + * ieee80211_is_beacon - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_BEACON + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_beacon(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); +} + +/** + * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_atim(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ATIM); +} + +/** + * ieee80211_is_disassoc - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DISASSOC + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_disassoc(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DISASSOC); +} + +/** + * ieee80211_is_auth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_AUTH + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_auth(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); +} + +/** + * ieee80211_is_deauth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DEAUTH + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_deauth(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH); +} + +/** + * ieee80211_is_action - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ACTION + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_action(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION); +} + +/** + * ieee80211_is_back_req - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK_REQ + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_back_req(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ); +} + +/** + * ieee80211_is_back - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_back(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK); +} + +/** + * ieee80211_is_pspoll - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_PSPOLL + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_pspoll(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); +} + +/** + * ieee80211_is_rts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_RTS + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_rts(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); +} + +/** + * ieee80211_is_cts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CTS + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_cts(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); +} + +/** + * ieee80211_is_ack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_ACK + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_ack(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK); +} + +/** + * ieee80211_is_cfend - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFEND + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_cfend(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFEND); +} + +/** + * ieee80211_is_cfendack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFENDACK + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_cfendack(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFENDACK); +} + +/** + * ieee80211_is_nullfunc - check if FTYPE=IEEE80211_FTYPE_DATA and STYPE=IEEE80211_STYPE_NULLFUNC + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_nullfunc(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC); +} struct ieee80211s_hdr { u8 flags; @@ -308,8 +657,20 @@ struct ieee80211_ht_addt_info { #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 #define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03 #define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C +/* 802.11n HT capability MSC set */ +#define IEEE80211_SUPP_MCS_SET_UEQM 4 +#define IEEE80211_HT_CAP_MAX_STREAMS 4 +#define IEEE80211_SUPP_MCS_SET_LEN 10 +/* maximum streams the spec allows */ +#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01 +#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02 +#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C +#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10 /* 802.11n HT IE masks */ #define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03 +#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00 +#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01 +#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03 #define IEEE80211_HT_IE_CHA_WIDTH 0x04 #define IEEE80211_HT_IE_HT_PROTECTION 0x0003 #define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004 @@ -540,6 +901,23 @@ enum ieee80211_back_parties { #define WLAN_MAX_KEY_LEN 32 /** + * ieee80211_get_qos_ctl - get pointer to qos control bytes + * @hdr: the frame + * + * The qos ctrl bytes come after the frame_control, duration, seq_num + * and 3 or 4 addresses of length ETH_ALEN. + * 3 addr: 2 + 2 + 2 + 3*6 = 24 + * 4 addr: 2 + 2 + 2 + 4*6 = 30 + */ +static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr) +{ + if (ieee80211_has_a4(hdr->frame_control)) + return (u8 *)hdr + 30; + else + return (u8 *)hdr + 24; +} + +/** * ieee80211_get_SA - get pointer to SA * * Given an 802.11 frame, this function returns the offset diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 6ef25c8..437f314 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -390,9 +390,10 @@ struct ieee80211_rx_status { * is for the whole aggregation. */ enum ieee80211_tx_status_flags { - IEEE80211_TX_STATUS_TX_FILTERED = 1<<0, - IEEE80211_TX_STATUS_ACK = 1<<1, - IEEE80211_TX_STATUS_AMPDU = 1<<2, + IEEE80211_TX_STATUS_TX_FILTERED = 1<<0, + IEEE80211_TX_STATUS_ACK = 1<<1, + IEEE80211_TX_STATUS_AMPDU = 1<<2, + IEEE80211_TX_STATUS_AMPDU_NO_BACK = 1<<3, }; /** diff --git a/include/net/wireless.h b/include/net/wireless.h index d05482f..ea6a278 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -45,6 +45,8 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, IEEE80211_CHAN_NO_IBSS = 1<<2, IEEE80211_CHAN_RADAR = 1<<3, + IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4, + IEEE80211_CHAN_NO_FAT_BELOW = 1<<5, }; /**